2 * Digi AccelePort USB-4 and USB-2 Serial Converters
4 * Copyright 2000 by Digi International
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
14 * Peter Berger (pberger@brimson.com)
15 * Al Borchers (borchers@steinerpoint.com)
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/slab.h>
21 #include <linux/tty.h>
22 #include <linux/tty_driver.h>
23 #include <linux/tty_flip.h>
24 #include <linux/module.h>
25 #include <linux/spinlock.h>
26 #include <linux/workqueue.h>
27 #include <linux/uaccess.h>
28 #include <linux/usb.h>
29 #include <linux/wait.h>
30 #include <linux/sched/signal.h>
31 #include <linux/usb/serial.h>
35 #define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
36 #define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
38 /* port output buffer length -- must be <= transfer buffer length - 2 */
39 /* so we can be sure to send the full buffer in one urb */
40 #define DIGI_OUT_BUF_SIZE 8
42 /* port input buffer length -- must be >= transfer buffer length - 3 */
43 /* so we can be sure to hold at least one full buffer from one urb */
44 #define DIGI_IN_BUF_SIZE 64
46 /* retry timeout while sleeping */
47 #define DIGI_RETRY_TIMEOUT (HZ/10)
49 /* timeout while waiting for tty output to drain in close */
50 /* this delay is used twice in close, so the total delay could */
51 /* be twice this value */
52 #define DIGI_CLOSE_TIMEOUT (5*HZ)
55 /* AccelePort USB Defines */
58 #define DIGI_VENDOR_ID 0x05c5
59 #define DIGI_2_ID 0x0002 /* USB-2 */
60 #define DIGI_4_ID 0x0004 /* USB-4 */
63 * "INB": can be used on the in-band endpoint
64 * "OOB": can be used on the out-of-band endpoint
66 #define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
67 #define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
68 #define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
69 #define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
70 #define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
71 #define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
72 #define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
73 #define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
74 #define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
75 #define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
76 #define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
77 #define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
78 #define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
79 #define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
80 #define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
81 #define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
82 #define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
83 #define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
84 #define DIGI_CMD_SEND_DATA 18 /* INB */
85 #define DIGI_CMD_RECEIVE_DATA 19 /* INB */
86 #define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
87 #define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
90 #define DIGI_BAUD_50 0
91 #define DIGI_BAUD_75 1
92 #define DIGI_BAUD_110 2
93 #define DIGI_BAUD_150 3
94 #define DIGI_BAUD_200 4
95 #define DIGI_BAUD_300 5
96 #define DIGI_BAUD_600 6
97 #define DIGI_BAUD_1200 7
98 #define DIGI_BAUD_1800 8
99 #define DIGI_BAUD_2400 9
100 #define DIGI_BAUD_4800 10
101 #define DIGI_BAUD_7200 11
102 #define DIGI_BAUD_9600 12
103 #define DIGI_BAUD_14400 13
104 #define DIGI_BAUD_19200 14
105 #define DIGI_BAUD_28800 15
106 #define DIGI_BAUD_38400 16
107 #define DIGI_BAUD_57600 17
108 #define DIGI_BAUD_76800 18
109 #define DIGI_BAUD_115200 19
110 #define DIGI_BAUD_153600 20
111 #define DIGI_BAUD_230400 21
112 #define DIGI_BAUD_460800 22
115 #define DIGI_WORD_SIZE_5 0
116 #define DIGI_WORD_SIZE_6 1
117 #define DIGI_WORD_SIZE_7 2
118 #define DIGI_WORD_SIZE_8 3
120 #define DIGI_PARITY_NONE 0
121 #define DIGI_PARITY_ODD 1
122 #define DIGI_PARITY_EVEN 2
123 #define DIGI_PARITY_MARK 3
124 #define DIGI_PARITY_SPACE 4
126 #define DIGI_STOP_BITS_1 0
127 #define DIGI_STOP_BITS_2 1
129 #define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
130 #define DIGI_INPUT_FLOW_CONTROL_RTS 2
131 #define DIGI_INPUT_FLOW_CONTROL_DTR 4
133 #define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
134 #define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
135 #define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
137 #define DIGI_DTR_INACTIVE 0
138 #define DIGI_DTR_ACTIVE 1
139 #define DIGI_DTR_INPUT_FLOW_CONTROL 2
141 #define DIGI_RTS_INACTIVE 0
142 #define DIGI_RTS_ACTIVE 1
143 #define DIGI_RTS_INPUT_FLOW_CONTROL 2
144 #define DIGI_RTS_TOGGLE 3
146 #define DIGI_FLUSH_TX 1
147 #define DIGI_FLUSH_RX 2
148 #define DIGI_RESUME_TX 4 /* clears xoff condition */
150 #define DIGI_TRANSMIT_NOT_IDLE 0
151 #define DIGI_TRANSMIT_IDLE 1
153 #define DIGI_DISABLE 0
154 #define DIGI_ENABLE 1
156 #define DIGI_DEASSERT 0
157 #define DIGI_ASSERT 1
159 /* in band status codes */
160 #define DIGI_OVERRUN_ERROR 4
161 #define DIGI_PARITY_ERROR 8
162 #define DIGI_FRAMING_ERROR 16
163 #define DIGI_BREAK_ERROR 32
165 /* out of band status */
166 #define DIGI_NO_ERROR 0
167 #define DIGI_BAD_FIRST_PARAMETER 1
168 #define DIGI_BAD_SECOND_PARAMETER 2
169 #define DIGI_INVALID_LINE 3
170 #define DIGI_INVALID_OPCODE 4
173 #define DIGI_READ_INPUT_SIGNALS_SLOT 1
174 #define DIGI_READ_INPUT_SIGNALS_ERR 2
175 #define DIGI_READ_INPUT_SIGNALS_BUSY 4
176 #define DIGI_READ_INPUT_SIGNALS_PE 8
177 #define DIGI_READ_INPUT_SIGNALS_CTS 16
178 #define DIGI_READ_INPUT_SIGNALS_DSR 32
179 #define DIGI_READ_INPUT_SIGNALS_RI 64
180 #define DIGI_READ_INPUT_SIGNALS_DCD 128
186 spinlock_t ds_serial_lock;
187 struct usb_serial_port *ds_oob_port; /* out-of-band port */
188 int ds_oob_port_num; /* index of out-of-band port */
189 int ds_device_started;
193 spinlock_t dp_port_lock;
196 unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
197 int dp_write_urb_in_use;
198 unsigned int dp_modem_signals;
199 int dp_transmit_idle;
200 wait_queue_head_t dp_transmit_idle_wait;
202 int dp_throttle_restart;
203 wait_queue_head_t dp_flush_wait;
204 wait_queue_head_t dp_close_wait; /* wait queue for close */
205 struct work_struct dp_wakeup_work;
206 struct usb_serial_port *dp_port;
210 /* Local Function Declarations */
212 static void digi_wakeup_write_lock(struct work_struct *work);
213 static int digi_write_oob_command(struct usb_serial_port *port,
214 unsigned char *buf, int count, int interruptible);
215 static int digi_write_inb_command(struct usb_serial_port *port,
216 unsigned char *buf, int count, unsigned long timeout);
217 static int digi_set_modem_signals(struct usb_serial_port *port,
218 unsigned int modem_signals, int interruptible);
219 static int digi_transmit_idle(struct usb_serial_port *port,
220 unsigned long timeout);
221 static void digi_rx_throttle(struct tty_struct *tty);
222 static void digi_rx_unthrottle(struct tty_struct *tty);
223 static void digi_set_termios(struct tty_struct *tty,
224 struct usb_serial_port *port, struct ktermios *old_termios);
225 static void digi_break_ctl(struct tty_struct *tty, int break_state);
226 static int digi_tiocmget(struct tty_struct *tty);
227 static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
229 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
230 const unsigned char *buf, int count);
231 static void digi_write_bulk_callback(struct urb *urb);
232 static int digi_write_room(struct tty_struct *tty);
233 static int digi_chars_in_buffer(struct tty_struct *tty);
234 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
235 static void digi_close(struct usb_serial_port *port);
236 static void digi_dtr_rts(struct usb_serial_port *port, int on);
237 static int digi_startup_device(struct usb_serial *serial);
238 static int digi_startup(struct usb_serial *serial);
239 static void digi_disconnect(struct usb_serial *serial);
240 static void digi_release(struct usb_serial *serial);
241 static int digi_port_probe(struct usb_serial_port *port);
242 static int digi_port_remove(struct usb_serial_port *port);
243 static void digi_read_bulk_callback(struct urb *urb);
244 static int digi_read_inb_callback(struct urb *urb);
245 static int digi_read_oob_callback(struct urb *urb);
248 static const struct usb_device_id id_table_combined[] = {
249 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
250 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
251 { } /* Terminating entry */
254 static const struct usb_device_id id_table_2[] = {
255 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
256 { } /* Terminating entry */
259 static const struct usb_device_id id_table_4[] = {
260 { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
261 { } /* Terminating entry */
264 MODULE_DEVICE_TABLE(usb, id_table_combined);
266 /* device info needed for the Digi serial converter */
268 static struct usb_serial_driver digi_acceleport_2_device = {
270 .owner = THIS_MODULE,
273 .description = "Digi 2 port USB adapter",
274 .id_table = id_table_2,
278 .dtr_rts = digi_dtr_rts,
280 .write_room = digi_write_room,
281 .write_bulk_callback = digi_write_bulk_callback,
282 .read_bulk_callback = digi_read_bulk_callback,
283 .chars_in_buffer = digi_chars_in_buffer,
284 .throttle = digi_rx_throttle,
285 .unthrottle = digi_rx_unthrottle,
286 .set_termios = digi_set_termios,
287 .break_ctl = digi_break_ctl,
288 .tiocmget = digi_tiocmget,
289 .tiocmset = digi_tiocmset,
290 .attach = digi_startup,
291 .disconnect = digi_disconnect,
292 .release = digi_release,
293 .port_probe = digi_port_probe,
294 .port_remove = digi_port_remove,
297 static struct usb_serial_driver digi_acceleport_4_device = {
299 .owner = THIS_MODULE,
302 .description = "Digi 4 port USB adapter",
303 .id_table = id_table_4,
308 .write_room = digi_write_room,
309 .write_bulk_callback = digi_write_bulk_callback,
310 .read_bulk_callback = digi_read_bulk_callback,
311 .chars_in_buffer = digi_chars_in_buffer,
312 .throttle = digi_rx_throttle,
313 .unthrottle = digi_rx_unthrottle,
314 .set_termios = digi_set_termios,
315 .break_ctl = digi_break_ctl,
316 .tiocmget = digi_tiocmget,
317 .tiocmset = digi_tiocmset,
318 .attach = digi_startup,
319 .disconnect = digi_disconnect,
320 .release = digi_release,
321 .port_probe = digi_port_probe,
322 .port_remove = digi_port_remove,
325 static struct usb_serial_driver * const serial_drivers[] = {
326 &digi_acceleport_2_device, &digi_acceleport_4_device, NULL
332 * Cond Wait Interruptible Timeout Irqrestore
334 * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
335 * so that wake ups are not lost if they occur between the unlock
336 * and the sleep. In other words, spin_unlock_irqrestore and
337 * interruptible_sleep_on_timeout are "atomic" with respect to
338 * wake ups. This is used to implement condition variables.
340 * interruptible_sleep_on_timeout is deprecated and has been replaced
341 * with the equivalent code.
344 static long cond_wait_interruptible_timeout_irqrestore(
345 wait_queue_head_t *q, long timeout,
346 spinlock_t *lock, unsigned long flags)
351 prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
352 spin_unlock_irqrestore(lock, flags);
353 timeout = schedule_timeout(timeout);
354 finish_wait(q, &wait);
363 * Wake up port, line discipline, and tty processes sleeping
367 static void digi_wakeup_write_lock(struct work_struct *work)
369 struct digi_port *priv =
370 container_of(work, struct digi_port, dp_wakeup_work);
371 struct usb_serial_port *port = priv->dp_port;
374 spin_lock_irqsave(&priv->dp_port_lock, flags);
375 tty_port_tty_wakeup(&port->port);
376 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
380 * Digi Write OOB Command
382 * Write commands on the out of band port. Commands are 4
383 * bytes each, multiple commands can be sent at once, and
384 * no command will be split across USB packets. Returns 0
385 * if successful, -EINTR if interrupted while sleeping and
386 * the interruptible flag is true, or a negative error
387 * returned by usb_submit_urb.
390 static int digi_write_oob_command(struct usb_serial_port *port,
391 unsigned char *buf, int count, int interruptible)
395 struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
396 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
397 unsigned long flags = 0;
400 "digi_write_oob_command: TOP: port=%d, count=%d\n",
401 oob_priv->dp_port_num, count);
403 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
405 while (oob_priv->dp_write_urb_in_use) {
406 cond_wait_interruptible_timeout_irqrestore(
407 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
408 &oob_priv->dp_port_lock, flags);
409 if (interruptible && signal_pending(current))
411 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
414 /* len must be a multiple of 4, so commands are not split */
415 len = min(count, oob_port->bulk_out_size);
418 memcpy(oob_port->write_urb->transfer_buffer, buf, len);
419 oob_port->write_urb->transfer_buffer_length = len;
420 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
422 oob_priv->dp_write_urb_in_use = 1;
427 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
429 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
437 * Digi Write In Band Command
439 * Write commands on the given port. Commands are 4
440 * bytes each, multiple commands can be sent at once, and
441 * no command will be split across USB packets. If timeout
442 * is non-zero, write in band command will return after
443 * waiting unsuccessfully for the URB status to clear for
444 * timeout ticks. Returns 0 if successful, or a negative
445 * error returned by digi_write.
448 static int digi_write_inb_command(struct usb_serial_port *port,
449 unsigned char *buf, int count, unsigned long timeout)
453 struct digi_port *priv = usb_get_serial_port_data(port);
454 unsigned char *data = port->write_urb->transfer_buffer;
455 unsigned long flags = 0;
457 dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n",
458 priv->dp_port_num, count);
465 spin_lock_irqsave(&priv->dp_port_lock, flags);
466 while (count > 0 && ret == 0) {
467 while (priv->dp_write_urb_in_use &&
468 time_before(jiffies, timeout)) {
469 cond_wait_interruptible_timeout_irqrestore(
470 &port->write_wait, DIGI_RETRY_TIMEOUT,
471 &priv->dp_port_lock, flags);
472 if (signal_pending(current))
474 spin_lock_irqsave(&priv->dp_port_lock, flags);
477 /* len must be a multiple of 4 and small enough to */
478 /* guarantee the write will send buffered data first, */
479 /* so commands are in order with data and not split */
480 len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
484 /* write any buffered data first */
485 if (priv->dp_out_buf_len > 0) {
486 data[0] = DIGI_CMD_SEND_DATA;
487 data[1] = priv->dp_out_buf_len;
488 memcpy(data + 2, priv->dp_out_buf,
489 priv->dp_out_buf_len);
490 memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
491 port->write_urb->transfer_buffer_length
492 = priv->dp_out_buf_len + 2 + len;
494 memcpy(data, buf, len);
495 port->write_urb->transfer_buffer_length = len;
498 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
500 priv->dp_write_urb_in_use = 1;
501 priv->dp_out_buf_len = 0;
507 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
511 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
512 __func__, ret, priv->dp_port_num);
518 * Digi Set Modem Signals
520 * Sets or clears DTR and RTS on the port, according to the
521 * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
522 * for the modem_signals argument. Returns 0 if successful,
523 * -EINTR if interrupted while sleeping, or a non-zero error
524 * returned by usb_submit_urb.
527 static int digi_set_modem_signals(struct usb_serial_port *port,
528 unsigned int modem_signals, int interruptible)
532 struct digi_port *port_priv = usb_get_serial_port_data(port);
533 struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
534 struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
535 unsigned char *data = oob_port->write_urb->transfer_buffer;
536 unsigned long flags = 0;
540 "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n",
541 port_priv->dp_port_num, modem_signals);
543 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
544 spin_lock(&port_priv->dp_port_lock);
546 while (oob_priv->dp_write_urb_in_use) {
547 spin_unlock(&port_priv->dp_port_lock);
548 cond_wait_interruptible_timeout_irqrestore(
549 &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
550 &oob_priv->dp_port_lock, flags);
551 if (interruptible && signal_pending(current))
553 spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
554 spin_lock(&port_priv->dp_port_lock);
556 data[0] = DIGI_CMD_SET_DTR_SIGNAL;
557 data[1] = port_priv->dp_port_num;
558 data[2] = (modem_signals & TIOCM_DTR) ?
559 DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
561 data[4] = DIGI_CMD_SET_RTS_SIGNAL;
562 data[5] = port_priv->dp_port_num;
563 data[6] = (modem_signals & TIOCM_RTS) ?
564 DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
567 oob_port->write_urb->transfer_buffer_length = 8;
569 ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
571 oob_priv->dp_write_urb_in_use = 1;
572 port_priv->dp_modem_signals =
573 (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
574 | (modem_signals&(TIOCM_DTR|TIOCM_RTS));
576 spin_unlock(&port_priv->dp_port_lock);
577 spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
579 dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
587 * Digi transmit idle waits, up to timeout ticks, for the transmitter
588 * to go idle. It returns 0 if successful or a negative error.
590 * There are race conditions here if more than one process is calling
591 * digi_transmit_idle on the same port at the same time. However, this
592 * is only called from close, and only one process can be in close on a
593 * port at a time, so its ok.
596 static int digi_transmit_idle(struct usb_serial_port *port,
597 unsigned long timeout)
600 unsigned char buf[2];
601 struct digi_port *priv = usb_get_serial_port_data(port);
602 unsigned long flags = 0;
604 spin_lock_irqsave(&priv->dp_port_lock, flags);
605 priv->dp_transmit_idle = 0;
606 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
608 buf[0] = DIGI_CMD_TRANSMIT_IDLE;
613 ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
617 spin_lock_irqsave(&priv->dp_port_lock, flags);
619 while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
620 cond_wait_interruptible_timeout_irqrestore(
621 &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
622 &priv->dp_port_lock, flags);
623 if (signal_pending(current))
625 spin_lock_irqsave(&priv->dp_port_lock, flags);
627 priv->dp_transmit_idle = 0;
628 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
634 static void digi_rx_throttle(struct tty_struct *tty)
637 struct usb_serial_port *port = tty->driver_data;
638 struct digi_port *priv = usb_get_serial_port_data(port);
640 /* stop receiving characters by not resubmitting the read urb */
641 spin_lock_irqsave(&priv->dp_port_lock, flags);
642 priv->dp_throttled = 1;
643 priv->dp_throttle_restart = 0;
644 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
648 static void digi_rx_unthrottle(struct tty_struct *tty)
652 struct usb_serial_port *port = tty->driver_data;
653 struct digi_port *priv = usb_get_serial_port_data(port);
655 spin_lock_irqsave(&priv->dp_port_lock, flags);
657 /* restart read chain */
658 if (priv->dp_throttle_restart)
659 ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
661 /* turn throttle off */
662 priv->dp_throttled = 0;
663 priv->dp_throttle_restart = 0;
665 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
669 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
670 __func__, ret, priv->dp_port_num);
674 static void digi_set_termios(struct tty_struct *tty,
675 struct usb_serial_port *port, struct ktermios *old_termios)
677 struct digi_port *priv = usb_get_serial_port_data(port);
678 struct device *dev = &port->dev;
679 unsigned int iflag = tty->termios.c_iflag;
680 unsigned int cflag = tty->termios.c_cflag;
681 unsigned int old_iflag = old_termios->c_iflag;
682 unsigned int old_cflag = old_termios->c_cflag;
683 unsigned char buf[32];
684 unsigned int modem_signals;
690 "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n",
691 priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
694 baud = tty_get_baud_rate(tty);
695 if (baud != tty_termios_baud_rate(old_termios)) {
698 /* reassert DTR and (maybe) RTS on transition from B0 */
699 if ((old_cflag & CBAUD) == B0) {
700 /* don't set RTS if using hardware flow control */
701 /* and throttling input */
702 modem_signals = TIOCM_DTR;
703 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
704 modem_signals |= TIOCM_RTS;
705 digi_set_modem_signals(port, modem_signals, 1);
708 /* drop DTR and RTS on transition to B0 */
709 case 0: digi_set_modem_signals(port, 0, 1); break;
710 case 50: arg = DIGI_BAUD_50; break;
711 case 75: arg = DIGI_BAUD_75; break;
712 case 110: arg = DIGI_BAUD_110; break;
713 case 150: arg = DIGI_BAUD_150; break;
714 case 200: arg = DIGI_BAUD_200; break;
715 case 300: arg = DIGI_BAUD_300; break;
716 case 600: arg = DIGI_BAUD_600; break;
717 case 1200: arg = DIGI_BAUD_1200; break;
718 case 1800: arg = DIGI_BAUD_1800; break;
719 case 2400: arg = DIGI_BAUD_2400; break;
720 case 4800: arg = DIGI_BAUD_4800; break;
721 case 9600: arg = DIGI_BAUD_9600; break;
722 case 19200: arg = DIGI_BAUD_19200; break;
723 case 38400: arg = DIGI_BAUD_38400; break;
724 case 57600: arg = DIGI_BAUD_57600; break;
725 case 115200: arg = DIGI_BAUD_115200; break;
726 case 230400: arg = DIGI_BAUD_230400; break;
727 case 460800: arg = DIGI_BAUD_460800; break;
729 arg = DIGI_BAUD_9600;
734 buf[i++] = DIGI_CMD_SET_BAUD_RATE;
735 buf[i++] = priv->dp_port_num;
741 tty->termios.c_cflag &= ~CMSPAR;
743 if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
746 arg = DIGI_PARITY_ODD;
748 arg = DIGI_PARITY_EVEN;
750 arg = DIGI_PARITY_NONE;
752 buf[i++] = DIGI_CMD_SET_PARITY;
753 buf[i++] = priv->dp_port_num;
758 if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
760 switch (cflag&CSIZE) {
761 case CS5: arg = DIGI_WORD_SIZE_5; break;
762 case CS6: arg = DIGI_WORD_SIZE_6; break;
763 case CS7: arg = DIGI_WORD_SIZE_7; break;
764 case CS8: arg = DIGI_WORD_SIZE_8; break;
767 "digi_set_termios: can't handle word size %d\n",
773 buf[i++] = DIGI_CMD_SET_WORD_SIZE;
774 buf[i++] = priv->dp_port_num;
782 if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
785 arg = DIGI_STOP_BITS_2;
787 arg = DIGI_STOP_BITS_1;
789 buf[i++] = DIGI_CMD_SET_STOP_BITS;
790 buf[i++] = priv->dp_port_num;
796 /* set input flow control */
797 if ((iflag&IXOFF) != (old_iflag&IXOFF)
798 || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
801 arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
803 arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
806 arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
808 /* On USB-4 it is necessary to assert RTS prior */
809 /* to selecting RTS input flow control. */
810 buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
811 buf[i++] = priv->dp_port_num;
812 buf[i++] = DIGI_RTS_ACTIVE;
816 arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
818 buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
819 buf[i++] = priv->dp_port_num;
824 /* set output flow control */
825 if ((iflag & IXON) != (old_iflag & IXON)
826 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
829 arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
831 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
833 if (cflag & CRTSCTS) {
834 arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
836 arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
839 buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
840 buf[i++] = priv->dp_port_num;
845 /* set receive enable/disable */
846 if ((cflag & CREAD) != (old_cflag & CREAD)) {
852 buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
853 buf[i++] = priv->dp_port_num;
857 ret = digi_write_oob_command(port, buf, i, 1);
859 dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret);
860 tty_encode_baud_rate(tty, baud, baud);
864 static void digi_break_ctl(struct tty_struct *tty, int break_state)
866 struct usb_serial_port *port = tty->driver_data;
867 unsigned char buf[4];
869 buf[0] = DIGI_CMD_BREAK_CONTROL;
870 buf[1] = 2; /* length */
871 buf[2] = break_state ? 1 : 0;
872 buf[3] = 0; /* pad */
873 digi_write_inb_command(port, buf, 4, 0);
877 static int digi_tiocmget(struct tty_struct *tty)
879 struct usb_serial_port *port = tty->driver_data;
880 struct digi_port *priv = usb_get_serial_port_data(port);
884 spin_lock_irqsave(&priv->dp_port_lock, flags);
885 val = priv->dp_modem_signals;
886 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
891 static int digi_tiocmset(struct tty_struct *tty,
892 unsigned int set, unsigned int clear)
894 struct usb_serial_port *port = tty->driver_data;
895 struct digi_port *priv = usb_get_serial_port_data(port);
899 spin_lock_irqsave(&priv->dp_port_lock, flags);
900 val = (priv->dp_modem_signals & ~clear) | set;
901 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
902 return digi_set_modem_signals(port, val, 1);
906 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
907 const unsigned char *buf, int count)
910 int ret, data_len, new_len;
911 struct digi_port *priv = usb_get_serial_port_data(port);
912 unsigned char *data = port->write_urb->transfer_buffer;
913 unsigned long flags = 0;
916 "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
917 priv->dp_port_num, count, in_interrupt());
919 /* copy user data (which can sleep) before getting spin lock */
920 count = min(count, port->bulk_out_size-2);
921 count = min(64, count);
923 /* be sure only one write proceeds at a time */
924 /* there are races on the port private buffer */
925 spin_lock_irqsave(&priv->dp_port_lock, flags);
927 /* wait for urb status clear to submit another urb */
928 if (priv->dp_write_urb_in_use) {
929 /* buffer data if count is 1 (probably put_char) if possible */
930 if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
931 priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
936 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
940 /* allow space for any buffered data and for new data, up to */
941 /* transfer buffer size - 2 (for command and length bytes) */
942 new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
943 data_len = new_len + priv->dp_out_buf_len;
946 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
950 port->write_urb->transfer_buffer_length = data_len+2;
952 *data++ = DIGI_CMD_SEND_DATA;
955 /* copy in buffered data first */
956 memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
957 data += priv->dp_out_buf_len;
959 /* copy in new data */
960 memcpy(data, buf, new_len);
962 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
964 priv->dp_write_urb_in_use = 1;
966 priv->dp_out_buf_len = 0;
969 /* return length of new data written, or error */
970 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
972 dev_err_console(port,
973 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
974 __func__, ret, priv->dp_port_num);
975 dev_dbg(&port->dev, "digi_write: returning %d\n", ret);
980 static void digi_write_bulk_callback(struct urb *urb)
983 struct usb_serial_port *port = urb->context;
984 struct usb_serial *serial;
985 struct digi_port *priv;
986 struct digi_serial *serial_priv;
988 int status = urb->status;
990 /* port and serial sanity check */
991 if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
992 pr_err("%s: port or port->private is NULL, status=%d\n",
996 serial = port->serial;
997 if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
999 "%s: serial or serial->private is NULL, status=%d\n",
1004 /* handle oob callback */
1005 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1006 dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
1007 spin_lock(&priv->dp_port_lock);
1008 priv->dp_write_urb_in_use = 0;
1009 wake_up_interruptible(&port->write_wait);
1010 spin_unlock(&priv->dp_port_lock);
1014 /* try to send any buffered data on this port */
1015 spin_lock(&priv->dp_port_lock);
1016 priv->dp_write_urb_in_use = 0;
1017 if (priv->dp_out_buf_len > 0) {
1018 *((unsigned char *)(port->write_urb->transfer_buffer))
1019 = (unsigned char)DIGI_CMD_SEND_DATA;
1020 *((unsigned char *)(port->write_urb->transfer_buffer) + 1)
1021 = (unsigned char)priv->dp_out_buf_len;
1022 port->write_urb->transfer_buffer_length =
1023 priv->dp_out_buf_len + 2;
1024 memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
1025 priv->dp_out_buf_len);
1026 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1028 priv->dp_write_urb_in_use = 1;
1029 priv->dp_out_buf_len = 0;
1032 /* wake up processes sleeping on writes immediately */
1033 tty_port_tty_wakeup(&port->port);
1034 /* also queue up a wakeup at scheduler time, in case we */
1035 /* lost the race in write_chan(). */
1036 schedule_work(&priv->dp_wakeup_work);
1038 spin_unlock(&priv->dp_port_lock);
1039 if (ret && ret != -EPERM)
1040 dev_err_console(port,
1041 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1042 __func__, ret, priv->dp_port_num);
1045 static int digi_write_room(struct tty_struct *tty)
1047 struct usb_serial_port *port = tty->driver_data;
1048 struct digi_port *priv = usb_get_serial_port_data(port);
1050 unsigned long flags = 0;
1052 spin_lock_irqsave(&priv->dp_port_lock, flags);
1054 if (priv->dp_write_urb_in_use)
1057 room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
1059 spin_unlock_irqrestore(&priv->dp_port_lock, flags);
1060 dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room);
1065 static int digi_chars_in_buffer(struct tty_struct *tty)
1067 struct usb_serial_port *port = tty->driver_data;
1068 struct digi_port *priv = usb_get_serial_port_data(port);
1070 if (priv->dp_write_urb_in_use) {
1071 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1072 priv->dp_port_num, port->bulk_out_size - 2);
1073 /* return(port->bulk_out_size - 2); */
1076 dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n",
1077 priv->dp_port_num, priv->dp_out_buf_len);
1078 return priv->dp_out_buf_len;
1083 static void digi_dtr_rts(struct usb_serial_port *port, int on)
1085 /* Adjust DTR and RTS */
1086 digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
1089 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
1092 unsigned char buf[32];
1093 struct digi_port *priv = usb_get_serial_port_data(port);
1094 struct ktermios not_termios;
1096 /* be sure the device is started up */
1097 if (digi_startup_device(port->serial) != 0)
1100 /* read modem signals automatically whenever they change */
1101 buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
1102 buf[1] = priv->dp_port_num;
1103 buf[2] = DIGI_ENABLE;
1107 buf[4] = DIGI_CMD_IFLUSH_FIFO;
1108 buf[5] = priv->dp_port_num;
1109 buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1112 ret = digi_write_oob_command(port, buf, 8, 1);
1114 dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret);
1116 /* set termios settings */
1118 not_termios.c_cflag = ~tty->termios.c_cflag;
1119 not_termios.c_iflag = ~tty->termios.c_iflag;
1120 digi_set_termios(tty, port, ¬_termios);
1126 static void digi_close(struct usb_serial_port *port)
1130 unsigned char buf[32];
1131 struct digi_port *priv = usb_get_serial_port_data(port);
1133 mutex_lock(&port->serial->disc_mutex);
1134 /* if disconnected, just clear flags */
1135 if (port->serial->disconnected)
1138 /* FIXME: Transmit idle belongs in the wait_unti_sent path */
1139 digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
1141 /* disable input flow control */
1142 buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
1143 buf[1] = priv->dp_port_num;
1144 buf[2] = DIGI_DISABLE;
1147 /* disable output flow control */
1148 buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
1149 buf[5] = priv->dp_port_num;
1150 buf[6] = DIGI_DISABLE;
1153 /* disable reading modem signals automatically */
1154 buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
1155 buf[9] = priv->dp_port_num;
1156 buf[10] = DIGI_DISABLE;
1159 /* disable receive */
1160 buf[12] = DIGI_CMD_RECEIVE_ENABLE;
1161 buf[13] = priv->dp_port_num;
1162 buf[14] = DIGI_DISABLE;
1166 buf[16] = DIGI_CMD_IFLUSH_FIFO;
1167 buf[17] = priv->dp_port_num;
1168 buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
1171 ret = digi_write_oob_command(port, buf, 20, 0);
1173 dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
1175 /* wait for final commands on oob port to complete */
1176 prepare_to_wait(&priv->dp_flush_wait, &wait,
1177 TASK_INTERRUPTIBLE);
1178 schedule_timeout(DIGI_CLOSE_TIMEOUT);
1179 finish_wait(&priv->dp_flush_wait, &wait);
1181 /* shutdown any outstanding bulk writes */
1182 usb_kill_urb(port->write_urb);
1184 spin_lock_irq(&priv->dp_port_lock);
1185 priv->dp_write_urb_in_use = 0;
1186 wake_up_interruptible(&priv->dp_close_wait);
1187 spin_unlock_irq(&priv->dp_port_lock);
1188 mutex_unlock(&port->serial->disc_mutex);
1193 * Digi Startup Device
1195 * Starts reads on all ports. Must be called AFTER startup, with
1196 * urbs initialized. Returns 0 if successful, non-zero error otherwise.
1199 static int digi_startup_device(struct usb_serial *serial)
1202 struct digi_serial *serial_priv = usb_get_serial_data(serial);
1203 struct usb_serial_port *port;
1205 /* be sure this happens exactly once */
1206 spin_lock(&serial_priv->ds_serial_lock);
1207 if (serial_priv->ds_device_started) {
1208 spin_unlock(&serial_priv->ds_serial_lock);
1211 serial_priv->ds_device_started = 1;
1212 spin_unlock(&serial_priv->ds_serial_lock);
1214 /* start reading from each bulk in endpoint for the device */
1215 /* set USB_DISABLE_SPD flag for write bulk urbs */
1216 for (i = 0; i < serial->type->num_ports + 1; i++) {
1217 port = serial->port[i];
1218 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
1221 "%s: usb_submit_urb failed, ret=%d, port=%d\n",
1229 static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
1231 struct digi_port *priv;
1233 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1237 spin_lock_init(&priv->dp_port_lock);
1238 priv->dp_port_num = port_num;
1239 init_waitqueue_head(&priv->dp_transmit_idle_wait);
1240 init_waitqueue_head(&priv->dp_flush_wait);
1241 init_waitqueue_head(&priv->dp_close_wait);
1242 INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
1243 priv->dp_port = port;
1245 init_waitqueue_head(&port->write_wait);
1247 usb_set_serial_port_data(port, priv);
1252 static int digi_startup(struct usb_serial *serial)
1254 struct device *dev = &serial->interface->dev;
1255 struct digi_serial *serial_priv;
1259 /* check whether the device has the expected number of endpoints */
1260 if (serial->num_port_pointers < serial->type->num_ports + 1) {
1261 dev_err(dev, "OOB endpoints missing\n");
1265 for (i = 0; i < serial->type->num_ports + 1 ; i++) {
1266 if (!serial->port[i]->read_urb) {
1267 dev_err(dev, "bulk-in endpoint missing\n");
1270 if (!serial->port[i]->write_urb) {
1271 dev_err(dev, "bulk-out endpoint missing\n");
1276 serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
1280 spin_lock_init(&serial_priv->ds_serial_lock);
1281 serial_priv->ds_oob_port_num = serial->type->num_ports;
1282 serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
1284 ret = digi_port_init(serial_priv->ds_oob_port,
1285 serial_priv->ds_oob_port_num);
1291 usb_set_serial_data(serial, serial_priv);
1297 static void digi_disconnect(struct usb_serial *serial)
1301 /* stop reads and writes on all ports */
1302 for (i = 0; i < serial->type->num_ports + 1; i++) {
1303 usb_kill_urb(serial->port[i]->read_urb);
1304 usb_kill_urb(serial->port[i]->write_urb);
1309 static void digi_release(struct usb_serial *serial)
1311 struct digi_serial *serial_priv;
1312 struct digi_port *priv;
1314 serial_priv = usb_get_serial_data(serial);
1316 priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
1322 static int digi_port_probe(struct usb_serial_port *port)
1324 return digi_port_init(port, port->port_number);
1327 static int digi_port_remove(struct usb_serial_port *port)
1329 struct digi_port *priv;
1331 priv = usb_get_serial_port_data(port);
1337 static void digi_read_bulk_callback(struct urb *urb)
1339 struct usb_serial_port *port = urb->context;
1340 struct digi_port *priv;
1341 struct digi_serial *serial_priv;
1343 int status = urb->status;
1345 /* port sanity check, do not resubmit if port is not valid */
1348 priv = usb_get_serial_port_data(port);
1350 dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
1354 if (port->serial == NULL ||
1355 (serial_priv = usb_get_serial_data(port->serial)) == NULL) {
1356 dev_err(&port->dev, "%s: serial is bad or serial->private "
1357 "is NULL, status=%d\n", __func__, status);
1361 /* do not resubmit urb if it has any status error */
1364 "%s: nonzero read bulk status: status=%d, port=%d\n",
1365 __func__, status, priv->dp_port_num);
1369 /* handle oob or inb callback, do not resubmit if error */
1370 if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
1371 if (digi_read_oob_callback(urb) != 0)
1374 if (digi_read_inb_callback(urb) != 0)
1379 ret = usb_submit_urb(urb, GFP_ATOMIC);
1380 if (ret != 0 && ret != -EPERM) {
1382 "%s: failed resubmitting urb, ret=%d, port=%d\n",
1383 __func__, ret, priv->dp_port_num);
1389 * Digi Read INB Callback
1391 * Digi Read INB Callback handles reads on the in band ports, sending
1392 * the data on to the tty subsystem. When called we know port and
1393 * port->private are not NULL and port->serial has been validated.
1394 * It returns 0 if successful, 1 if successful but the port is
1395 * throttled, and -1 if the sanity checks failed.
1398 static int digi_read_inb_callback(struct urb *urb)
1400 struct usb_serial_port *port = urb->context;
1401 struct digi_port *priv = usb_get_serial_port_data(port);
1402 unsigned char *buf = urb->transfer_buffer;
1406 unsigned char *data;
1407 int flag, throttled;
1409 /* short/multiple packet check */
1410 if (urb->actual_length < 2) {
1411 dev_warn(&port->dev, "short packet received\n");
1418 if (urb->actual_length != len + 2) {
1419 dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
1420 priv->dp_port_num, opcode, len, urb->actual_length);
1424 if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
1425 dev_err(&port->dev, "malformed data packet received\n");
1429 spin_lock(&priv->dp_port_lock);
1431 /* check for throttle; if set, do not resubmit read urb */
1432 /* indicate the read chain needs to be restarted on unthrottle */
1433 throttled = priv->dp_throttled;
1435 priv->dp_throttle_restart = 1;
1438 if (opcode == DIGI_CMD_RECEIVE_DATA) {
1439 port_status = buf[2];
1442 /* get flag from port_status */
1445 /* overrun is special, not associated with a char */
1446 if (port_status & DIGI_OVERRUN_ERROR)
1447 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1449 /* break takes precedence over parity, */
1450 /* which takes precedence over framing errors */
1451 if (port_status & DIGI_BREAK_ERROR)
1453 else if (port_status & DIGI_PARITY_ERROR)
1455 else if (port_status & DIGI_FRAMING_ERROR)
1458 /* data length is len-1 (one byte of len is port_status) */
1461 tty_insert_flip_string_fixed_flag(&port->port, data,
1463 tty_flip_buffer_push(&port->port);
1466 spin_unlock(&priv->dp_port_lock);
1468 if (opcode == DIGI_CMD_RECEIVE_DISABLE)
1469 dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
1470 else if (opcode != DIGI_CMD_RECEIVE_DATA)
1471 dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode);
1473 return throttled ? 1 : 0;
1479 * Digi Read OOB Callback
1481 * Digi Read OOB Callback handles reads on the out of band port.
1482 * When called we know port and port->private are not NULL and
1483 * the port->serial is valid. It returns 0 if successful, and
1484 * -1 if the sanity checks failed.
1487 static int digi_read_oob_callback(struct urb *urb)
1490 struct usb_serial_port *port = urb->context;
1491 struct usb_serial *serial = port->serial;
1492 struct tty_struct *tty;
1493 struct digi_port *priv = usb_get_serial_port_data(port);
1494 unsigned char *buf = urb->transfer_buffer;
1495 int opcode, line, status, val;
1499 if (urb->actual_length < 4)
1502 /* handle each oob command */
1503 for (i = 0; i < urb->actual_length - 3; i += 4) {
1506 status = buf[i + 2];
1509 dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
1510 opcode, line, status, val);
1512 if (status != 0 || line >= serial->type->num_ports)
1515 port = serial->port[line];
1517 priv = usb_get_serial_port_data(port);
1521 tty = tty_port_tty_get(&port->port);
1525 rts = C_CRTSCTS(tty);
1527 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
1528 spin_lock(&priv->dp_port_lock);
1529 /* convert from digi flags to termiox flags */
1530 if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
1531 priv->dp_modem_signals |= TIOCM_CTS;
1532 /* port must be open to use tty struct */
1534 tty_port_tty_wakeup(&port->port);
1536 priv->dp_modem_signals &= ~TIOCM_CTS;
1537 /* port must be open to use tty struct */
1539 if (val & DIGI_READ_INPUT_SIGNALS_DSR)
1540 priv->dp_modem_signals |= TIOCM_DSR;
1542 priv->dp_modem_signals &= ~TIOCM_DSR;
1543 if (val & DIGI_READ_INPUT_SIGNALS_RI)
1544 priv->dp_modem_signals |= TIOCM_RI;
1546 priv->dp_modem_signals &= ~TIOCM_RI;
1547 if (val & DIGI_READ_INPUT_SIGNALS_DCD)
1548 priv->dp_modem_signals |= TIOCM_CD;
1550 priv->dp_modem_signals &= ~TIOCM_CD;
1552 spin_unlock(&priv->dp_port_lock);
1553 } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
1554 spin_lock(&priv->dp_port_lock);
1555 priv->dp_transmit_idle = 1;
1556 wake_up_interruptible(&priv->dp_transmit_idle_wait);
1557 spin_unlock(&priv->dp_port_lock);
1558 } else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
1559 wake_up_interruptible(&priv->dp_flush_wait);
1567 module_usb_serial_driver(serial_drivers, id_table_combined);
1569 MODULE_AUTHOR(DRIVER_AUTHOR);
1570 MODULE_DESCRIPTION(DRIVER_DESC);
1571 MODULE_LICENSE("GPL");