2 * Fintek F81232 USB to serial adaptor driver
4 * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
5 * Copyright (C) 2012 Linux Foundation
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published by
9 * the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/errno.h>
15 #include <linux/init.h>
16 #include <linux/slab.h>
17 #include <linux/tty.h>
18 #include <linux/tty_driver.h>
19 #include <linux/tty_flip.h>
20 #include <linux/serial.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/spinlock.h>
24 #include <linux/uaccess.h>
25 #include <linux/usb.h>
26 #include <linux/usb/serial.h>
28 static const struct usb_device_id id_table[] = {
29 { USB_DEVICE(0x1934, 0x0706) },
30 { } /* Terminating entry */
32 MODULE_DEVICE_TABLE(usb, id_table);
34 #define CONTROL_DTR 0x01
35 #define CONTROL_RTS 0x02
37 #define UART_STATE 0x08
38 #define UART_STATE_TRANSIENT_MASK 0x74
41 #define UART_BREAK_ERROR 0x04
42 #define UART_RING 0x08
43 #define UART_FRAME_ERROR 0x10
44 #define UART_PARITY_ERROR 0x20
45 #define UART_OVERRUN_ERROR 0x40
48 struct f81232_private {
54 static void f81232_update_line_status(struct usb_serial_port *port,
56 unsigned int actual_length)
60 static void f81232_read_int_callback(struct urb *urb)
62 struct usb_serial_port *port = urb->context;
63 unsigned char *data = urb->transfer_buffer;
64 unsigned int actual_length = urb->actual_length;
65 int status = urb->status;
75 /* this urb is terminated, clean up */
76 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
80 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
85 usb_serial_debug_data(&port->dev, __func__,
86 urb->actual_length, urb->transfer_buffer);
88 f81232_update_line_status(port, data, actual_length);
91 retval = usb_submit_urb(urb, GFP_ATOMIC);
93 dev_err(&urb->dev->dev,
94 "%s - usb_submit_urb failed with result %d\n",
98 static void f81232_process_read_urb(struct urb *urb)
100 struct usb_serial_port *port = urb->context;
101 struct f81232_private *priv = usb_get_serial_port_data(port);
102 unsigned char *data = urb->transfer_buffer;
103 char tty_flag = TTY_NORMAL;
108 /* update line status */
109 spin_lock_irqsave(&priv->lock, flags);
110 line_status = priv->line_status;
111 priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
112 spin_unlock_irqrestore(&priv->lock, flags);
113 wake_up_interruptible(&port->port.delta_msr_wait);
115 if (!urb->actual_length)
118 /* break takes precedence over parity, */
119 /* which takes precedence over framing errors */
120 if (line_status & UART_BREAK_ERROR)
121 tty_flag = TTY_BREAK;
122 else if (line_status & UART_PARITY_ERROR)
123 tty_flag = TTY_PARITY;
124 else if (line_status & UART_FRAME_ERROR)
125 tty_flag = TTY_FRAME;
126 dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
128 /* overrun is special, not associated with a char */
129 if (line_status & UART_OVERRUN_ERROR)
130 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
132 if (port->port.console && port->sysrq) {
133 for (i = 0; i < urb->actual_length; ++i)
134 if (!usb_serial_handle_sysrq_char(port, data[i]))
135 tty_insert_flip_char(&port->port, data[i],
138 tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
142 tty_flip_buffer_push(&port->port);
145 static int set_control_lines(struct usb_device *dev, u8 value)
147 /* FIXME - Stubbed out for now */
151 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
153 /* FIXME - Stubbed out for now */
156 * break_state = -1 to turn on break, and 0 to turn off break
157 * see drivers/char/tty_io.c to see it used.
158 * last_set_data_urb_value NEVER has the break bit set in it.
162 static void f81232_set_termios(struct tty_struct *tty,
163 struct usb_serial_port *port, struct ktermios *old_termios)
165 /* FIXME - Stubbed out for now */
167 /* Don't change anything if nothing has changed */
168 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
171 /* Do the real work here... */
173 tty_termios_copy_hw(&tty->termios, old_termios);
176 static int f81232_tiocmget(struct tty_struct *tty)
178 /* FIXME - Stubbed out for now */
182 static int f81232_tiocmset(struct tty_struct *tty,
183 unsigned int set, unsigned int clear)
185 /* FIXME - Stubbed out for now */
189 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
195 f81232_set_termios(tty, port, NULL);
197 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
199 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
200 " error %d\n", __func__, result);
204 result = usb_serial_generic_open(tty, port);
206 usb_kill_urb(port->interrupt_in_urb);
210 port->port.drain_delay = 256;
214 static void f81232_close(struct usb_serial_port *port)
216 usb_serial_generic_close(port);
217 usb_kill_urb(port->interrupt_in_urb);
220 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
222 struct f81232_private *priv = usb_get_serial_port_data(port);
226 spin_lock_irqsave(&priv->lock, flags);
227 /* Change DTR and RTS */
229 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
231 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
232 control = priv->line_control;
233 spin_unlock_irqrestore(&priv->lock, flags);
234 set_control_lines(port->serial->dev, control);
237 static int f81232_carrier_raised(struct usb_serial_port *port)
239 struct f81232_private *priv = usb_get_serial_port_data(port);
240 if (priv->line_status & UART_DCD)
245 static int f81232_tiocmiwait(struct tty_struct *tty, unsigned long arg)
247 struct usb_serial_port *port = tty->driver_data;
248 struct f81232_private *priv = usb_get_serial_port_data(port);
250 unsigned int prevstatus;
252 unsigned int changed;
254 spin_lock_irqsave(&priv->lock, flags);
255 prevstatus = priv->line_status;
256 spin_unlock_irqrestore(&priv->lock, flags);
259 interruptible_sleep_on(&port->port.delta_msr_wait);
260 /* see if a signal did it */
261 if (signal_pending(current))
264 if (port->serial->disconnected)
267 spin_lock_irqsave(&priv->lock, flags);
268 status = priv->line_status;
269 spin_unlock_irqrestore(&priv->lock, flags);
271 changed = prevstatus ^ status;
273 if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
274 ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
275 ((arg & TIOCM_CD) && (changed & UART_DCD)) ||
276 ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
285 static int f81232_ioctl(struct tty_struct *tty,
286 unsigned int cmd, unsigned long arg)
288 struct serial_struct ser;
289 struct usb_serial_port *port = tty->driver_data;
291 dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd);
295 memset(&ser, 0, sizeof ser);
296 ser.type = PORT_16654;
297 ser.line = port->minor;
298 ser.port = port->port_number;
299 ser.baud_base = 460800;
301 if (copy_to_user((void __user *)arg, &ser, sizeof ser))
306 dev_dbg(&port->dev, "%s not supported = 0x%04x\n",
313 static int f81232_port_probe(struct usb_serial_port *port)
315 struct f81232_private *priv;
317 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
321 spin_lock_init(&priv->lock);
323 usb_set_serial_port_data(port, priv);
328 static int f81232_port_remove(struct usb_serial_port *port)
330 struct f81232_private *priv;
332 priv = usb_get_serial_port_data(port);
338 static struct usb_serial_driver f81232_device = {
340 .owner = THIS_MODULE,
343 .id_table = id_table,
346 .bulk_out_size = 256,
348 .close = f81232_close,
349 .dtr_rts = f81232_dtr_rts,
350 .carrier_raised = f81232_carrier_raised,
351 .ioctl = f81232_ioctl,
352 .break_ctl = f81232_break_ctl,
353 .set_termios = f81232_set_termios,
354 .tiocmget = f81232_tiocmget,
355 .tiocmset = f81232_tiocmset,
356 .tiocmiwait = f81232_tiocmiwait,
357 .process_read_urb = f81232_process_read_urb,
358 .read_int_callback = f81232_read_int_callback,
359 .port_probe = f81232_port_probe,
360 .port_remove = f81232_port_remove,
363 static struct usb_serial_driver * const serial_drivers[] = {
368 module_usb_serial_driver(serial_drivers, id_table);
370 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
371 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
372 MODULE_LICENSE("GPL v2");