drivers/usb/serial/io_edgeport.c

   1 /*
   2  * Edgeport USB Serial Converter driver
   3  *
   4  * Copyright (C) 2000 Inside Out Networks, All rights reserved.
   5  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
   6  *
   7  *      This program is free software; you can redistribute it and/or modify
   8  *      it under the terms of the GNU General Public License as published by
   9  *      the Free Software Foundation; either version 2 of the License, or
  10  *      (at your option) any later version.
  11  *
  12  * Supports the following devices:
  13  *      Edgeport/4
  14  *      Edgeport/4t
  15  *      Edgeport/2
  16  *      Edgeport/4i
  17  *      Edgeport/2i
  18  *      Edgeport/421
  19  *      Edgeport/21
  20  *      Rapidport/4
  21  *      Edgeport/8
  22  *      Edgeport/2D8
  23  *      Edgeport/4D8
  24  *      Edgeport/8i
  25  *
  26  * For questions or problems with this driver, contact Inside Out
  27  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  28  * or Al Borchers <alborchers@steinerpoint.com>.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/jiffies.h>
  34 #include <linux/errno.h>
  35 #include <linux/slab.h>
  36 #include <linux/tty.h>
  37 #include <linux/tty_driver.h>
  38 #include <linux/tty_flip.h>
  39 #include <linux/module.h>
  40 #include <linux/spinlock.h>
  41 #include <linux/serial.h>
  42 #include <linux/ioctl.h>
  43 #include <linux/wait.h>
  44 #include <linux/firmware.h>
  45 #include <linux/ihex.h>
  46 #include <linux/uaccess.h>
  47 #include <linux/usb.h>
  48 #include <linux/usb/serial.h>
  49 #include "io_edgeport.h"
  50 #include "io_ionsp.h"           /* info for the iosp messages */
  51 #include "io_16654.h"           /* 16654 UART defines */
  52
  53 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
  54 #define DRIVER_DESC "Edgeport USB Serial Driver"
  55
  56 #define MAX_NAME_LEN            64
  57
  58 #define OPEN_TIMEOUT            (5*HZ)          /* 5 seconds */
  59
  60 /* receive port state */
  61 enum RXSTATE {
  62         EXPECT_HDR1 = 0,    /* Expect header byte 1 */
  63         EXPECT_HDR2 = 1,    /* Expect header byte 2 */
  64         EXPECT_DATA = 2,    /* Expect 'RxBytesRemaining' data */
  65         EXPECT_HDR3 = 3,    /* Expect header byte 3 (for status hdrs only) */
  66 };
  67
  68
  69 /* Transmit Fifo
  70  * This Transmit queue is an extension of the edgeport Rx buffer.
  71  * The maximum amount of data buffered in both the edgeport
  72  * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
  73  */
  74 struct TxFifo {
  75         unsigned int    head;   /* index to head pointer (write) */
  76         unsigned int    tail;   /* index to tail pointer (read)  */
  77         unsigned int    count;  /* Bytes in queue */
  78         unsigned int    size;   /* Max size of queue (equal to Max number of TxCredits) */
  79         unsigned char   *fifo;  /* allocated Buffer */
  80 };
  81
  82 /* This structure holds all of the local port information */
  83 struct edgeport_port {
  84         __u16                   txCredits;              /* our current credits for this port */
  85         __u16                   maxTxCredits;           /* the max size of the port */
  86
  87         struct TxFifo           txfifo;                 /* transmit fifo -- size will be maxTxCredits */
  88         struct urb              *write_urb;             /* write URB for this port */
  89         bool                    write_in_progress;      /* 'true' while a write URB is outstanding */
  90         spinlock_t              ep_lock;
  91
  92         __u8                    shadowLCR;              /* last LCR value received */
  93         __u8                    shadowMCR;              /* last MCR value received */
  94         __u8                    shadowMSR;              /* last MSR value received */
  95         __u8                    shadowLSR;              /* last LSR value received */
  96         __u8                    shadowXonChar;          /* last value set as XON char in Edgeport */
  97         __u8                    shadowXoffChar;         /* last value set as XOFF char in Edgeport */
  98         __u8                    validDataMask;
  99         __u32                   baudRate;
 100
 101         bool                    open;
 102         bool                    openPending;
 103         bool                    commandPending;
 104         bool                    closePending;
 105         bool                    chaseResponsePending;
 106
 107         wait_queue_head_t       wait_chase;             /* for handling sleeping while waiting for chase to finish */
 108         wait_queue_head_t       wait_open;              /* for handling sleeping while waiting for open to finish */
 109         wait_queue_head_t       wait_command;           /* for handling sleeping while waiting for command to finish */
 110
 111         struct usb_serial_port  *port;                  /* loop back to the owner of this object */
 112 };
 113
 114
 115 /* This structure holds all of the individual device information */
 116 struct edgeport_serial {
 117         char                    name[MAX_NAME_LEN+2];           /* string name of this device */
 118
 119         struct edge_manuf_descriptor    manuf_descriptor;       /* the manufacturer descriptor */
 120         struct edge_boot_descriptor     boot_descriptor;        /* the boot firmware descriptor */
 121         struct edgeport_product_info    product_info;           /* Product Info */
 122         struct edge_compatibility_descriptor epic_descriptor;   /* Edgeport compatible descriptor */
 123         int                     is_epic;                        /* flag if EPiC device or not */
 124
 125         __u8                    interrupt_in_endpoint;          /* the interrupt endpoint handle */
 126         unsigned char           *interrupt_in_buffer;           /* the buffer we use for the interrupt endpoint */
 127         struct urb              *interrupt_read_urb;            /* our interrupt urb */
 128
 129         __u8                    bulk_in_endpoint;               /* the bulk in endpoint handle */
 130         unsigned char           *bulk_in_buffer;                /* the buffer we use for the bulk in endpoint */
 131         struct urb              *read_urb;                      /* our bulk read urb */
 132         bool                    read_in_progress;
 133         spinlock_t              es_lock;
 134
 135         __u8                    bulk_out_endpoint;              /* the bulk out endpoint handle */
 136
 137         __s16                   rxBytesAvail;                   /* the number of bytes that we need to read from this device */
 138
 139         enum RXSTATE            rxState;                        /* the current state of the bulk receive processor */
 140         __u8                    rxHeader1;                      /* receive header byte 1 */
 141         __u8                    rxHeader2;                      /* receive header byte 2 */
 142         __u8                    rxHeader3;                      /* receive header byte 3 */
 143         __u8                    rxPort;                         /* the port that we are currently receiving data for */
 144         __u8                    rxStatusCode;                   /* the receive status code */
 145         __u8                    rxStatusParam;                  /* the receive status paramater */
 146         __s16                   rxBytesRemaining;               /* the number of port bytes left to read */
 147         struct usb_serial       *serial;                        /* loop back to the owner of this object */
 148 };
 149
 150 /* baud rate information */
 151 struct divisor_table_entry {
 152         __u32   BaudRate;
 153         __u16  Divisor;
 154 };
 155
 156 /*
 157  * Define table of divisors for Rev A EdgePort/4 hardware
 158  * These assume a 3.6864MHz crystal, the standard /16, and
 159  * MCR.7 = 0.
 160  */
 161
 162 static const struct divisor_table_entry divisor_table[] = {
 163         {   50,         4608},
 164         {   75,         3072},
 165         {   110,        2095},  /* 2094.545455 => 230450   => .0217 % over */
 166         {   134,        1713},  /* 1713.011152 => 230398.5 => .00065% under */
 167         {   150,        1536},
 168         {   300,        768},
 169         {   600,        384},
 170         {   1200,       192},
 171         {   1800,       128},
 172         {   2400,       96},
 173         {   4800,       48},
 174         {   7200,       32},
 175         {   9600,       24},
 176         {   14400,      16},
 177         {   19200,      12},
 178         {   38400,      6},
 179         {   57600,      4},
 180         {   115200,     2},
 181         {   230400,     1},
 182 };
 183
 184 /* Number of outstanding Command Write Urbs */
 185 static atomic_t CmdUrbs = ATOMIC_INIT(0);
 186
 187
 188 /* local function prototypes */
 189
 190 /* function prototypes for all URB callbacks */
 191 static void edge_interrupt_callback(struct urb *urb);
 192 static void edge_bulk_in_callback(struct urb *urb);
 193 static void edge_bulk_out_data_callback(struct urb *urb);
 194 static void edge_bulk_out_cmd_callback(struct urb *urb);
 195
 196 /* function prototypes for the usbserial callbacks */
 197 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 198 static void edge_close(struct usb_serial_port *port);
 199 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 200                                         const unsigned char *buf, int count);
 201 static int edge_write_room(struct tty_struct *tty);
 202 static int edge_chars_in_buffer(struct tty_struct *tty);
 203 static void edge_throttle(struct tty_struct *tty);
 204 static void edge_unthrottle(struct tty_struct *tty);
 205 static void edge_set_termios(struct tty_struct *tty,
 206                                         struct usb_serial_port *port,
 207                                         struct ktermios *old_termios);
 208 static int  edge_ioctl(struct tty_struct *tty,
 209                                         unsigned int cmd, unsigned long arg);
 210 static void edge_break(struct tty_struct *tty, int break_state);
 211 static int  edge_tiocmget(struct tty_struct *tty);
 212 static int  edge_tiocmset(struct tty_struct *tty,
 213                                         unsigned int set, unsigned int clear);
 214 static int  edge_startup(struct usb_serial *serial);
 215 static void edge_disconnect(struct usb_serial *serial);
 216 static void edge_release(struct usb_serial *serial);
 217 static int edge_port_probe(struct usb_serial_port *port);
 218 static int edge_port_remove(struct usb_serial_port *port);
 219
 220 #include "io_tables.h"  /* all of the devices that this driver supports */
 221
 222 /* function prototypes for all of our local functions */
 223
 224 static void  process_rcvd_data(struct edgeport_serial *edge_serial,
 225                                 unsigned char *buffer, __u16 bufferLength);
 226 static void process_rcvd_status(struct edgeport_serial *edge_serial,
 227                                 __u8 byte2, __u8 byte3);
 228 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
 229                 int length);
 230 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
 231 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 232                                 __u8 lsr, __u8 data);
 233 static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
 234                                 __u8 param);
 235 static int  calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor);
 236 static int  send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 237                                 int baudRate);
 238 static void change_port_settings(struct tty_struct *tty,
 239                                 struct edgeport_port *edge_port,
 240                                 struct ktermios *old_termios);
 241 static int  send_cmd_write_uart_register(struct edgeport_port *edge_port,
 242                                 __u8 regNum, __u8 regValue);
 243 static int  write_cmd_usb(struct edgeport_port *edge_port,
 244                                 unsigned char *buffer, int writeLength);
 245 static void send_more_port_data(struct edgeport_serial *edge_serial,
 246                                 struct edgeport_port *edge_port);
 247
 248 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 249                                         __u16 length, const __u8 *data);
 250 static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 251                                                 __u16 length, __u8 *data);
 252 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 253                                         __u16 length, const __u8 *data);
 254 static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
 255 static void get_boot_desc(struct edgeport_serial *edge_serial);
 256 static void load_application_firmware(struct edgeport_serial *edge_serial);
 257
 258 static void unicode_to_ascii(char *string, int buflen,
 259                                 __le16 *unicode, int unicode_size);
 260
 261
 262 /* ************************************************************************ */
 263 /* ************************************************************************ */
 264 /* ************************************************************************ */
 265 /* ************************************************************************ */
 266
 267 /************************************************************************
 268  *                                                                      *
 269  * update_edgeport_E2PROM()     Compare current versions of             *
 270  *                              Boot ROM and Manufacture                *
 271  *                              Descriptors with versions               *
 272  *                              embedded in this driver                 *
 273  *                                                                      *
 274  ************************************************************************/
 275 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 276 {
 277         struct device *dev = &edge_serial->serial->dev->dev;
 278         __u32 BootCurVer;
 279         __u32 BootNewVer;
 280         __u8 BootMajorVersion;
 281         __u8 BootMinorVersion;
 282         __u16 BootBuildNumber;
 283         __u32 Bootaddr;
 284         const struct ihex_binrec *rec;
 285         const struct firmware *fw;
 286         const char *fw_name;
 287         int response;
 288
 289         switch (edge_serial->product_info.iDownloadFile) {
 290         case EDGE_DOWNLOAD_FILE_I930:
 291                 fw_name = "edgeport/boot.fw";
 292                 break;
 293         case EDGE_DOWNLOAD_FILE_80251:
 294                 fw_name = "edgeport/boot2.fw";
 295                 break;
 296         default:
 297                 return;
 298         }
 299
 300         response = request_ihex_firmware(&fw, fw_name,
 301                                          &edge_serial->serial->dev->dev);
 302         if (response) {
 303                 dev_err(dev, "Failed to load image \"%s\" err %d\n",
 304                        fw_name, response);
 305                 return;
 306         }
 307
 308         rec = (const struct ihex_binrec *)fw->data;
 309         BootMajorVersion = rec->data[0];
 310         BootMinorVersion = rec->data[1];
 311         BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
 312
 313         /* Check Boot Image Version */
 314         BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
 315                      (edge_serial->boot_descriptor.MinorVersion << 16) +
 316                       le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
 317
 318         BootNewVer = (BootMajorVersion << 24) +
 319                      (BootMinorVersion << 16) +
 320                       BootBuildNumber;
 321
 322         dev_dbg(dev, "Current Boot Image version %d.%d.%d\n",
 323             edge_serial->boot_descriptor.MajorVersion,
 324             edge_serial->boot_descriptor.MinorVersion,
 325             le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
 326
 327
 328         if (BootNewVer > BootCurVer) {
 329                 dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n",
 330                     edge_serial->boot_descriptor.MajorVersion,
 331                     edge_serial->boot_descriptor.MinorVersion,
 332                     le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
 333                     BootMajorVersion, BootMinorVersion, BootBuildNumber);
 334
 335                 dev_dbg(dev, "Downloading new Boot Image\n");
 336
 337                 for (rec = ihex_next_binrec(rec); rec;
 338                      rec = ihex_next_binrec(rec)) {
 339                         Bootaddr = be32_to_cpu(rec->addr);
 340                         response = rom_write(edge_serial->serial,
 341                                              Bootaddr >> 16,
 342                                              Bootaddr & 0xFFFF,
 343                                              be16_to_cpu(rec->len),
 344                                              &rec->data[0]);
 345                         if (response < 0) {
 346                                 dev_err(&edge_serial->serial->dev->dev,
 347                                         "rom_write failed (%x, %x, %d)\n",
 348                                         Bootaddr >> 16, Bootaddr & 0xFFFF,
 349                                         be16_to_cpu(rec->len));
 350                                 break;
 351                         }
 352                 }
 353         } else {
 354                 dev_dbg(dev, "Boot Image -- already up to date\n");
 355         }
 356         release_firmware(fw);
 357 }
 358
 359 #if 0
 360 /************************************************************************
 361  *
 362  *  Get string descriptor from device
 363  *
 364  ************************************************************************/
 365 static int get_string_desc(struct usb_device *dev, int Id,
 366                                 struct usb_string_descriptor **pRetDesc)
 367 {
 368         struct usb_string_descriptor StringDesc;
 369         struct usb_string_descriptor *pStringDesc;
 370
 371         dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id);
 372
 373         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
 374                                                 sizeof(StringDesc)))
 375                 return 0;
 376
 377         pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
 378         if (!pStringDesc)
 379                 return -1;
 380
 381         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
 382                                                         StringDesc.bLength)) {
 383                 kfree(pStringDesc);
 384                 return -1;
 385         }
 386
 387         *pRetDesc = pStringDesc;
 388         return 0;
 389 }
 390 #endif
 391
 392 static void dump_product_info(struct edgeport_serial *edge_serial,
 393                               struct edgeport_product_info *product_info)
 394 {
 395         struct device *dev = &edge_serial->serial->dev->dev;
 396
 397         /* Dump Product Info structure */
 398         dev_dbg(dev, "**Product Information:\n");
 399         dev_dbg(dev, "  ProductId             %x\n", product_info->ProductId);
 400         dev_dbg(dev, "  NumPorts              %d\n", product_info->NumPorts);
 401         dev_dbg(dev, "  ProdInfoVer           %d\n", product_info->ProdInfoVer);
 402         dev_dbg(dev, "  IsServer              %d\n", product_info->IsServer);
 403         dev_dbg(dev, "  IsRS232               %d\n", product_info->IsRS232);
 404         dev_dbg(dev, "  IsRS422               %d\n", product_info->IsRS422);
 405         dev_dbg(dev, "  IsRS485               %d\n", product_info->IsRS485);
 406         dev_dbg(dev, "  RomSize               %d\n", product_info->RomSize);
 407         dev_dbg(dev, "  RamSize               %d\n", product_info->RamSize);
 408         dev_dbg(dev, "  CpuRev                %x\n", product_info->CpuRev);
 409         dev_dbg(dev, "  BoardRev              %x\n", product_info->BoardRev);
 410         dev_dbg(dev, "  BootMajorVersion      %d.%d.%d\n",
 411                 product_info->BootMajorVersion,
 412                 product_info->BootMinorVersion,
 413                 le16_to_cpu(product_info->BootBuildNumber));
 414         dev_dbg(dev, "  FirmwareMajorVersion  %d.%d.%d\n",
 415                 product_info->FirmwareMajorVersion,
 416                 product_info->FirmwareMinorVersion,
 417                 le16_to_cpu(product_info->FirmwareBuildNumber));
 418         dev_dbg(dev, "  ManufactureDescDate   %d/%d/%d\n",
 419                 product_info->ManufactureDescDate[0],
 420                 product_info->ManufactureDescDate[1],
 421                 product_info->ManufactureDescDate[2]+1900);
 422         dev_dbg(dev, "  iDownloadFile         0x%x\n",
 423                 product_info->iDownloadFile);
 424         dev_dbg(dev, "  EpicVer               %d\n", product_info->EpicVer);
 425 }
 426
 427 static void get_product_info(struct edgeport_serial *edge_serial)
 428 {
 429         struct edgeport_product_info *product_info = &edge_serial->product_info;
 430
 431         memset(product_info, 0, sizeof(struct edgeport_product_info));
 432
 433         product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
 434         product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
 435         product_info->ProdInfoVer = 0;
 436
 437         product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
 438         product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
 439         product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
 440         product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
 441
 442         product_info->BootMajorVersion =
 443                                 edge_serial->boot_descriptor.MajorVersion;
 444         product_info->BootMinorVersion =
 445                                 edge_serial->boot_descriptor.MinorVersion;
 446         product_info->BootBuildNumber =
 447                                 edge_serial->boot_descriptor.BuildNumber;
 448
 449         memcpy(product_info->ManufactureDescDate,
 450                         edge_serial->manuf_descriptor.DescDate,
 451                         sizeof(edge_serial->manuf_descriptor.DescDate));
 452
 453         /* check if this is 2nd generation hardware */
 454         if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
 455                                             & ION_DEVICE_ID_80251_NETCHIP)
 456                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
 457         else
 458                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
 459
 460         /* Determine Product type and set appropriate flags */
 461         switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
 462         case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
 463         case ION_DEVICE_ID_EDGEPORT_4T:
 464         case ION_DEVICE_ID_EDGEPORT_4:
 465         case ION_DEVICE_ID_EDGEPORT_2:
 466         case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
 467         case ION_DEVICE_ID_EDGEPORT_8:
 468         case ION_DEVICE_ID_EDGEPORT_421:
 469         case ION_DEVICE_ID_EDGEPORT_21:
 470         case ION_DEVICE_ID_EDGEPORT_2_DIN:
 471         case ION_DEVICE_ID_EDGEPORT_4_DIN:
 472         case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
 473                 product_info->IsRS232 = 1;
 474                 break;
 475
 476         case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */
 477                 product_info->IsRS422 = 1;
 478                 product_info->IsRS485 = 1;
 479                 break;
 480
 481         case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */
 482         case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */
 483                 product_info->IsRS422 = 1;
 484                 break;
 485         }
 486
 487         dump_product_info(edge_serial, product_info);
 488 }
 489
 490 static int get_epic_descriptor(struct edgeport_serial *ep)
 491 {
 492         int result;
 493         struct usb_serial *serial = ep->serial;
 494         struct edgeport_product_info *product_info = &ep->product_info;
 495         struct edge_compatibility_descriptor *epic;
 496         struct edge_compatibility_bits *bits;
 497         struct device *dev = &serial->dev->dev;
 498
 499         ep->is_epic = 0;
 500
 501         epic = kmalloc(sizeof(*epic), GFP_KERNEL);
 502         if (!epic)
 503                 return -ENOMEM;
 504
 505         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 506                                  USB_REQUEST_ION_GET_EPIC_DESC,
 507                                  0xC0, 0x00, 0x00,
 508                                  epic, sizeof(*epic),
 509                                  300);
 510         if (result == sizeof(*epic)) {
 511                 ep->is_epic = 1;
 512                 memcpy(&ep->epic_descriptor, epic, sizeof(*epic));
 513                 memset(product_info, 0, sizeof(struct edgeport_product_info));
 514
 515                 product_info->NumPorts = epic->NumPorts;
 516                 product_info->ProdInfoVer = 0;
 517                 product_info->FirmwareMajorVersion = epic->MajorVersion;
 518                 product_info->FirmwareMinorVersion = epic->MinorVersion;
 519                 product_info->FirmwareBuildNumber = epic->BuildNumber;
 520                 product_info->iDownloadFile = epic->iDownloadFile;
 521                 product_info->EpicVer = epic->EpicVer;
 522                 product_info->Epic = epic->Supports;
 523                 product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
 524                 dump_product_info(ep, product_info);
 525
 526                 bits = &ep->epic_descriptor.Supports;
 527                 dev_dbg(dev, "**EPIC descriptor:\n");
 528                 dev_dbg(dev, "  VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE");
 529                 dev_dbg(dev, "  IOSPOpen         : %s\n", bits->IOSPOpen        ? "TRUE": "FALSE");
 530                 dev_dbg(dev, "  IOSPClose        : %s\n", bits->IOSPClose       ? "TRUE": "FALSE");
 531                 dev_dbg(dev, "  IOSPChase        : %s\n", bits->IOSPChase       ? "TRUE": "FALSE");
 532                 dev_dbg(dev, "  IOSPSetRxFlow    : %s\n", bits->IOSPSetRxFlow   ? "TRUE": "FALSE");
 533                 dev_dbg(dev, "  IOSPSetTxFlow    : %s\n", bits->IOSPSetTxFlow   ? "TRUE": "FALSE");
 534                 dev_dbg(dev, "  IOSPSetXChar     : %s\n", bits->IOSPSetXChar    ? "TRUE": "FALSE");
 535                 dev_dbg(dev, "  IOSPRxCheck      : %s\n", bits->IOSPRxCheck     ? "TRUE": "FALSE");
 536                 dev_dbg(dev, "  IOSPSetClrBreak  : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE");
 537                 dev_dbg(dev, "  IOSPWriteMCR     : %s\n", bits->IOSPWriteMCR    ? "TRUE": "FALSE");
 538                 dev_dbg(dev, "  IOSPWriteLCR     : %s\n", bits->IOSPWriteLCR    ? "TRUE": "FALSE");
 539                 dev_dbg(dev, "  IOSPSetBaudRate  : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE");
 540                 dev_dbg(dev, "  TrueEdgeport     : %s\n", bits->TrueEdgeport    ? "TRUE": "FALSE");
 541
 542                 result = 0;
 543         } else if (result >= 0) {
 544                 dev_warn(&serial->interface->dev, "short epic descriptor received: %d\n",
 545                          result);
 546                 result = -EIO;
 547         }
 548
 549         kfree(epic);
 550
 551         return result;
 552 }
 553
 554
 555 /************************************************************************/
 556 /************************************************************************/
 557 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 558 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 559 /************************************************************************/
 560 /************************************************************************/
 561
 562 /*****************************************************************************
 563  * edge_interrupt_callback
 564  *      this is the callback function for when we have received data on the
 565  *      interrupt endpoint.
 566  *****************************************************************************/
 567 static void edge_interrupt_callback(struct urb *urb)
 568 {
 569         struct edgeport_serial *edge_serial = urb->context;
 570         struct device *dev;
 571         struct edgeport_port *edge_port;
 572         struct usb_serial_port *port;
 573         unsigned char *data = urb->transfer_buffer;
 574         int length = urb->actual_length;
 575         int bytes_avail;
 576         int position;
 577         int txCredits;
 578         int portNumber;
 579         int result;
 580         int status = urb->status;
 581
 582         switch (status) {
 583         case 0:
 584                 /* success */
 585                 break;
 586         case -ECONNRESET:
 587         case -ENOENT:
 588         case -ESHUTDOWN:
 589                 /* this urb is terminated, clean up */
 590                 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
 591                 return;
 592         default:
 593                 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
 594                 goto exit;
 595         }
 596
 597         dev = &edge_serial->serial->dev->dev;
 598
 599         /* process this interrupt-read even if there are no ports open */
 600         if (length) {
 601                 usb_serial_debug_data(dev, __func__, length, data);
 602
 603                 if (length > 1) {
 604                         bytes_avail = data[0] | (data[1] << 8);
 605                         if (bytes_avail) {
 606                                 spin_lock(&edge_serial->es_lock);
 607                                 edge_serial->rxBytesAvail += bytes_avail;
 608                                 dev_dbg(dev,
 609                                         "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n",
 610                                         __func__, bytes_avail,
 611                                         edge_serial->rxBytesAvail,
 612                                         edge_serial->read_in_progress);
 613
 614                                 if (edge_serial->rxBytesAvail > 0 &&
 615                                     !edge_serial->read_in_progress) {
 616                                         dev_dbg(dev, "%s - posting a read\n", __func__);
 617                                         edge_serial->read_in_progress = true;
 618
 619                                         /* we have pending bytes on the
 620                                            bulk in pipe, send a request */
 621                                         result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 622                                         if (result) {
 623                                                 dev_err(dev,
 624                                                         "%s - usb_submit_urb(read bulk) failed with result = %d\n",
 625                                                         __func__, result);
 626                                                 edge_serial->read_in_progress = false;
 627                                         }
 628                                 }
 629                                 spin_unlock(&edge_serial->es_lock);
 630                         }
 631                 }
 632                 /* grab the txcredits for the ports if available */
 633                 position = 2;
 634                 portNumber = 0;
 635                 while ((position < length) &&
 636                                 (portNumber < edge_serial->serial->num_ports)) {
 637                         txCredits = data[position] | (data[position+1] << 8);
 638                         if (txCredits) {
 639                                 port = edge_serial->serial->port[portNumber];
 640                                 edge_port = usb_get_serial_port_data(port);
 641                                 if (edge_port->open) {
 642                                         spin_lock(&edge_port->ep_lock);
 643                                         edge_port->txCredits += txCredits;
 644                                         spin_unlock(&edge_port->ep_lock);
 645                                         dev_dbg(dev, "%s - txcredits for port%d = %d\n",
 646                                                 __func__, portNumber,
 647                                                 edge_port->txCredits);
 648
 649                                         /* tell the tty driver that something
 650                                            has changed */
 651                                         tty_port_tty_wakeup(&edge_port->port->port);
 652                                         /* Since we have more credit, check
 653                                            if more data can be sent */
 654                                         send_more_port_data(edge_serial,
 655                                                                 edge_port);
 656                                 }
 657                         }
 658                         position += 2;
 659                         ++portNumber;
 660                 }
 661         }
 662
 663 exit:
 664         result = usb_submit_urb(urb, GFP_ATOMIC);
 665         if (result)
 666                 dev_err(&urb->dev->dev,
 667                         "%s - Error %d submitting control urb\n",
 668                                                 __func__, result);
 669 }
 670
 671
 672 /*****************************************************************************
 673  * edge_bulk_in_callback
 674  *      this is the callback function for when we have received data on the
 675  *      bulk in endpoint.
 676  *****************************************************************************/
 677 static void edge_bulk_in_callback(struct urb *urb)
 678 {
 679         struct edgeport_serial  *edge_serial = urb->context;
 680         struct device *dev;
 681         unsigned char           *data = urb->transfer_buffer;
 682         int                     retval;
 683         __u16                   raw_data_length;
 684         int status = urb->status;
 685
 686         if (status) {
 687                 dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
 688                         __func__, status);
 689                 edge_serial->read_in_progress = false;
 690                 return;
 691         }
 692
 693         if (urb->actual_length == 0) {
 694                 dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__);
 695                 edge_serial->read_in_progress = false;
 696                 return;
 697         }
 698
 699         dev = &edge_serial->serial->dev->dev;
 700         raw_data_length = urb->actual_length;
 701
 702         usb_serial_debug_data(dev, __func__, raw_data_length, data);
 703
 704         spin_lock(&edge_serial->es_lock);
 705
 706         /* decrement our rxBytes available by the number that we just got */
 707         edge_serial->rxBytesAvail -= raw_data_length;
 708
 709         dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__,
 710                 raw_data_length, edge_serial->rxBytesAvail);
 711
 712         process_rcvd_data(edge_serial, data, urb->actual_length);
 713
 714         /* check to see if there's any more data for us to read */
 715         if (edge_serial->rxBytesAvail > 0) {
 716                 dev_dbg(dev, "%s - posting a read\n", __func__);
 717                 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 718                 if (retval) {
 719                         dev_err(dev,
 720                                 "%s - usb_submit_urb(read bulk) failed, retval = %d\n",
 721                                 __func__, retval);
 722                         edge_serial->read_in_progress = false;
 723                 }
 724         } else {
 725                 edge_serial->read_in_progress = false;
 726         }
 727
 728         spin_unlock(&edge_serial->es_lock);
 729 }
 730
 731
 732 /*****************************************************************************
 733  * edge_bulk_out_data_callback
 734  *      this is the callback function for when we have finished sending
 735  *      serial data on the bulk out endpoint.
 736  *****************************************************************************/
 737 static void edge_bulk_out_data_callback(struct urb *urb)
 738 {
 739         struct edgeport_port *edge_port = urb->context;
 740         int status = urb->status;
 741
 742         if (status) {
 743                 dev_dbg(&urb->dev->dev,
 744                         "%s - nonzero write bulk status received: %d\n",
 745                         __func__, status);
 746         }
 747
 748         if (edge_port->open)
 749                 tty_port_tty_wakeup(&edge_port->port->port);
 750
 751         /* Release the Write URB */
 752         edge_port->write_in_progress = false;
 753
 754         /* Check if more data needs to be sent */
 755         send_more_port_data((struct edgeport_serial *)
 756                 (usb_get_serial_data(edge_port->port->serial)), edge_port);
 757 }
 758
 759
 760 /*****************************************************************************
 761  * BulkOutCmdCallback
 762  *      this is the callback function for when we have finished sending a
 763  *      command on the bulk out endpoint.
 764  *****************************************************************************/
 765 static void edge_bulk_out_cmd_callback(struct urb *urb)
 766 {
 767         struct edgeport_port *edge_port = urb->context;
 768         int status = urb->status;
 769
 770         atomic_dec(&CmdUrbs);
 771         dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n",
 772                 __func__, urb, atomic_read(&CmdUrbs));
 773
 774
 775         /* clean up the transfer buffer */
 776         kfree(urb->transfer_buffer);
 777
 778         /* Free the command urb */
 779         usb_free_urb(urb);
 780
 781         if (status) {
 782                 dev_dbg(&urb->dev->dev,
 783                         "%s - nonzero write bulk status received: %d\n",
 784                         __func__, status);
 785                 return;
 786         }
 787
 788         /* tell the tty driver that something has changed */
 789         if (edge_port->open)
 790                 tty_port_tty_wakeup(&edge_port->port->port);
 791
 792         /* we have completed the command */
 793         edge_port->commandPending = false;
 794         wake_up(&edge_port->wait_command);
 795 }
 796
 797
 798 /*****************************************************************************
 799  * Driver tty interface functions
 800  *****************************************************************************/
 801
 802 /*****************************************************************************
 803  * SerialOpen
 804  *      this function is called by the tty driver when a port is opened
 805  *      If successful, we return 0
 806  *      Otherwise we return a negative error number.
 807  *****************************************************************************/
 808 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 809 {
 810         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 811         struct device *dev = &port->dev;
 812         struct usb_serial *serial;
 813         struct edgeport_serial *edge_serial;
 814         int response;
 815
 816         if (edge_port == NULL)
 817                 return -ENODEV;
 818
 819         /* see if we've set up our endpoint info yet (can't set it up
 820            in edge_startup as the structures were not set up at that time.) */
 821         serial = port->serial;
 822         edge_serial = usb_get_serial_data(serial);
 823         if (edge_serial == NULL)
 824                 return -ENODEV;
 825         if (edge_serial->interrupt_in_buffer == NULL) {
 826                 struct usb_serial_port *port0 = serial->port[0];
 827
 828                 /* not set up yet, so do it now */
 829                 edge_serial->interrupt_in_buffer =
 830                                         port0->interrupt_in_buffer;
 831                 edge_serial->interrupt_in_endpoint =
 832                                         port0->interrupt_in_endpointAddress;
 833                 edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
 834                 edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
 835                 edge_serial->bulk_in_endpoint =
 836                                         port0->bulk_in_endpointAddress;
 837                 edge_serial->read_urb = port0->read_urb;
 838                 edge_serial->bulk_out_endpoint =
 839                                         port0->bulk_out_endpointAddress;
 840
 841                 /* set up our interrupt urb */
 842                 usb_fill_int_urb(edge_serial->interrupt_read_urb,
 843                       serial->dev,
 844                       usb_rcvintpipe(serial->dev,
 845                                 port0->interrupt_in_endpointAddress),
 846                       port0->interrupt_in_buffer,
 847                       edge_serial->interrupt_read_urb->transfer_buffer_length,
 848                       edge_interrupt_callback, edge_serial,
 849                       edge_serial->interrupt_read_urb->interval);
 850
 851                 /* set up our bulk in urb */
 852                 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
 853                         usb_rcvbulkpipe(serial->dev,
 854                                 port0->bulk_in_endpointAddress),
 855                         port0->bulk_in_buffer,
 856                         edge_serial->read_urb->transfer_buffer_length,
 857                         edge_bulk_in_callback, edge_serial);
 858                 edge_serial->read_in_progress = false;
 859
 860                 /* start interrupt read for this edgeport
 861                  * this interrupt will continue as long
 862                  * as the edgeport is connected */
 863                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
 864                                                                 GFP_KERNEL);
 865                 if (response) {
 866                         dev_err(dev, "%s - Error %d submitting control urb\n",
 867                                 __func__, response);
 868                 }
 869         }
 870
 871         /* initialize our wait queues */
 872         init_waitqueue_head(&edge_port->wait_open);
 873         init_waitqueue_head(&edge_port->wait_chase);
 874         init_waitqueue_head(&edge_port->wait_command);
 875
 876         /* initialize our port settings */
 877         edge_port->txCredits = 0;       /* Can't send any data yet */
 878         /* Must always set this bit to enable ints! */
 879         edge_port->shadowMCR = MCR_MASTER_IE;
 880         edge_port->chaseResponsePending = false;
 881
 882         /* send a open port command */
 883         edge_port->openPending = true;
 884         edge_port->open        = false;
 885         response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
 886
 887         if (response < 0) {
 888                 dev_err(dev, "%s - error sending open port command\n", __func__);
 889                 edge_port->openPending = false;
 890                 return -ENODEV;
 891         }
 892
 893         /* now wait for the port to be completely opened */
 894         wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
 895                                                                 OPEN_TIMEOUT);
 896
 897         if (!edge_port->open) {
 898                 /* open timed out */
 899                 dev_dbg(dev, "%s - open timedout\n", __func__);
 900                 edge_port->openPending = false;
 901                 return -ENODEV;
 902         }
 903
 904         /* create the txfifo */
 905         edge_port->txfifo.head  = 0;
 906         edge_port->txfifo.tail  = 0;
 907         edge_port->txfifo.count = 0;
 908         edge_port->txfifo.size  = edge_port->maxTxCredits;
 909         edge_port->txfifo.fifo  = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 910
 911         if (!edge_port->txfifo.fifo) {
 912                 edge_close(port);
 913                 return -ENOMEM;
 914         }
 915
 916         /* Allocate a URB for the write */
 917         edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 918         edge_port->write_in_progress = false;
 919
 920         if (!edge_port->write_urb) {
 921                 edge_close(port);
 922                 return -ENOMEM;
 923         }
 924
 925         dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n",
 926                 __func__, edge_port->maxTxCredits);
 927
 928         return 0;
 929 }
 930
 931
 932 /************************************************************************
 933  *
 934  * block_until_chase_response
 935  *
 936  *      This function will block the close until one of the following:
 937  *              1. Response to our Chase comes from Edgeport
 938  *              2. A timeout of 10 seconds without activity has expired
 939  *                 (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
 940  *
 941  ************************************************************************/
 942 static void block_until_chase_response(struct edgeport_port *edge_port)
 943 {
 944         struct device *dev = &edge_port->port->dev;
 945         DEFINE_WAIT(wait);
 946         __u16 lastCredits;
 947         int timeout = 1*HZ;
 948         int loop = 10;
 949
 950         while (1) {
 951                 /* Save Last credits */
 952                 lastCredits = edge_port->txCredits;
 953
 954                 /* Did we get our Chase response */
 955                 if (!edge_port->chaseResponsePending) {
 956                         dev_dbg(dev, "%s - Got Chase Response\n", __func__);
 957
 958                         /* did we get all of our credit back? */
 959                         if (edge_port->txCredits == edge_port->maxTxCredits) {
 960                                 dev_dbg(dev, "%s - Got all credits\n", __func__);
 961                                 return;
 962                         }
 963                 }
 964
 965                 /* Block the thread for a while */
 966                 prepare_to_wait(&edge_port->wait_chase, &wait,
 967                                                 TASK_UNINTERRUPTIBLE);
 968                 schedule_timeout(timeout);
 969                 finish_wait(&edge_port->wait_chase, &wait);
 970
 971                 if (lastCredits == edge_port->txCredits) {
 972                         /* No activity.. count down. */
 973                         loop--;
 974                         if (loop == 0) {
 975                                 edge_port->chaseResponsePending = false;
 976                                 dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__);
 977                                 return;
 978                         }
 979                 } else {
 980                         /* Reset timeout value back to 10 seconds */
 981                         dev_dbg(dev, "%s - Last %d, Current %d\n", __func__,
 982                                         lastCredits, edge_port->txCredits);
 983                         loop = 10;
 984                 }
 985         }
 986 }
 987
 988
 989 /************************************************************************
 990  *
 991  * block_until_tx_empty
 992  *
 993  *      This function will block the close until one of the following:
 994  *              1. TX count are 0
 995  *              2. The edgeport has stopped
 996  *              3. A timeout of 3 seconds without activity has expired
 997  *
 998  ************************************************************************/
 999 static void block_until_tx_empty(struct edgeport_port *edge_port)
1000 {
1001         struct device *dev = &edge_port->port->dev;
1002         DEFINE_WAIT(wait);
1003         struct TxFifo *fifo = &edge_port->txfifo;
1004         __u32 lastCount;
1005         int timeout = HZ/10;
1006         int loop = 30;
1007
1008         while (1) {
1009                 /* Save Last count */
1010                 lastCount = fifo->count;
1011
1012                 /* Is the Edgeport Buffer empty? */
1013                 if (lastCount == 0) {
1014                         dev_dbg(dev, "%s - TX Buffer Empty\n", __func__);
1015                         return;
1016                 }
1017
1018                 /* Block the thread for a while */
1019                 prepare_to_wait(&edge_port->wait_chase, &wait,
1020                                                 TASK_UNINTERRUPTIBLE);
1021                 schedule_timeout(timeout);
1022                 finish_wait(&edge_port->wait_chase, &wait);
1023
1024                 dev_dbg(dev, "%s wait\n", __func__);
1025
1026                 if (lastCount == fifo->count) {
1027                         /* No activity.. count down. */
1028                         loop--;
1029                         if (loop == 0) {
1030                                 dev_dbg(dev, "%s - TIMEOUT\n", __func__);
1031                                 return;
1032                         }
1033                 } else {
1034                         /* Reset timeout value back to seconds */
1035                         loop = 30;
1036                 }
1037         }
1038 }
1039
1040
1041 /*****************************************************************************
1042  * edge_close
1043  *      this function is called by the tty driver when a port is closed
1044  *****************************************************************************/
1045 static void edge_close(struct usb_serial_port *port)
1046 {
1047         struct edgeport_serial *edge_serial;
1048         struct edgeport_port *edge_port;
1049         int status;
1050
1051         edge_serial = usb_get_serial_data(port->serial);
1052         edge_port = usb_get_serial_port_data(port);
1053         if (edge_serial == NULL || edge_port == NULL)
1054                 return;
1055
1056         /* block until tx is empty */
1057         block_until_tx_empty(edge_port);
1058
1059         edge_port->closePending = true;
1060
1061         if (!edge_serial->is_epic ||
1062             edge_serial->epic_descriptor.Supports.IOSPChase) {
1063                 /* flush and chase */
1064                 edge_port->chaseResponsePending = true;
1065
1066                 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
1067                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1068                 if (status == 0)
1069                         /* block until chase finished */
1070                         block_until_chase_response(edge_port);
1071                 else
1072                         edge_port->chaseResponsePending = false;
1073         }
1074
1075         if (!edge_serial->is_epic ||
1076             edge_serial->epic_descriptor.Supports.IOSPClose) {
1077                /* close the port */
1078                 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
1079                 send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
1080         }
1081
1082         /* port->close = true; */
1083         edge_port->closePending = false;
1084         edge_port->open = false;
1085         edge_port->openPending = false;
1086
1087         usb_kill_urb(edge_port->write_urb);
1088
1089         if (edge_port->write_urb) {
1090                 /* if this urb had a transfer buffer already
1091                                 (old transfer) free it */
1092                 kfree(edge_port->write_urb->transfer_buffer);
1093                 usb_free_urb(edge_port->write_urb);
1094                 edge_port->write_urb = NULL;
1095         }
1096         kfree(edge_port->txfifo.fifo);
1097         edge_port->txfifo.fifo = NULL;
1098 }
1099
1100 /*****************************************************************************
1101  * SerialWrite
1102  *      this function is called by the tty driver when data should be written
1103  *      to the port.
1104  *      If successful, we return the number of bytes written, otherwise we
1105  *      return a negative error number.
1106  *****************************************************************************/
1107 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1108                                         const unsigned char *data, int count)
1109 {
1110         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1111         struct TxFifo *fifo;
1112         int copySize;
1113         int bytesleft;
1114         int firsthalf;
1115         int secondhalf;
1116         unsigned long flags;
1117
1118         if (edge_port == NULL)
1119                 return -ENODEV;
1120
1121         /* get a pointer to the Tx fifo */
1122         fifo = &edge_port->txfifo;
1123
1124         spin_lock_irqsave(&edge_port->ep_lock, flags);
1125
1126         /* calculate number of bytes to put in fifo */
1127         copySize = min((unsigned int)count,
1128                                 (edge_port->txCredits - fifo->count));
1129
1130         dev_dbg(&port->dev, "%s of %d byte(s) Fifo room  %d -- will copy %d bytes\n",
1131                 __func__, count, edge_port->txCredits - fifo->count, copySize);
1132
1133         /* catch writes of 0 bytes which the tty driver likes to give us,
1134            and when txCredits is empty */
1135         if (copySize == 0) {
1136                 dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__);
1137                 goto finish_write;
1138         }
1139
1140         /* queue the data
1141          * since we can never overflow the buffer we do not have to check for a
1142          * full condition
1143          *
1144          * the copy is done is two parts -- first fill to the end of the buffer
1145          * then copy the reset from the start of the buffer
1146          */
1147         bytesleft = fifo->size - fifo->head;
1148         firsthalf = min(bytesleft, copySize);
1149         dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__,
1150                 firsthalf, bytesleft);
1151
1152         /* now copy our data */
1153         memcpy(&fifo->fifo[fifo->head], data, firsthalf);
1154         usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
1155
1156         /* update the index and size */
1157         fifo->head  += firsthalf;
1158         fifo->count += firsthalf;
1159
1160         /* wrap the index */
1161         if (fifo->head == fifo->size)
1162                 fifo->head = 0;
1163
1164         secondhalf = copySize-firsthalf;
1165
1166         if (secondhalf) {
1167                 dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf);
1168                 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
1169                 usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
1170                 /* update the index and size */
1171                 fifo->count += secondhalf;
1172                 fifo->head  += secondhalf;
1173                 /* No need to check for wrap since we can not get to end of
1174                  * the fifo in this part
1175                  */
1176         }
1177
1178 finish_write:
1179         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1180
1181         send_more_port_data((struct edgeport_serial *)
1182                         usb_get_serial_data(port->serial), edge_port);
1183
1184         dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n",
1185                 __func__, copySize, edge_port->txCredits, fifo->count);
1186
1187         return copySize;
1188 }
1189
1190
1191 /************************************************************************
1192  *
1193  * send_more_port_data()
1194  *
1195  *      This routine attempts to write additional UART transmit data
1196  *      to a port over the USB bulk pipe. It is called (1) when new
1197  *      data has been written to a port's TxBuffer from higher layers
1198  *      (2) when the peripheral sends us additional TxCredits indicating
1199  *      that it can accept more Tx data for a given port; and (3) when
1200  *      a bulk write completes successfully and we want to see if we
1201  *      can transmit more.
1202  *
1203  ************************************************************************/
1204 static void send_more_port_data(struct edgeport_serial *edge_serial,
1205                                         struct edgeport_port *edge_port)
1206 {
1207         struct TxFifo   *fifo = &edge_port->txfifo;
1208         struct device   *dev = &edge_port->port->dev;
1209         struct urb      *urb;
1210         unsigned char   *buffer;
1211         int             status;
1212         int             count;
1213         int             bytesleft;
1214         int             firsthalf;
1215         int             secondhalf;
1216         unsigned long   flags;
1217
1218         spin_lock_irqsave(&edge_port->ep_lock, flags);
1219
1220         if (edge_port->write_in_progress ||
1221             !edge_port->open             ||
1222             (fifo->count == 0)) {
1223                 dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n",
1224                         __func__, fifo->count, edge_port->write_in_progress);
1225                 goto exit_send;
1226         }
1227
1228         /* since the amount of data in the fifo will always fit into the
1229          * edgeport buffer we do not need to check the write length
1230          *
1231          * Do we have enough credits for this port to make it worthwhile
1232          * to bother queueing a write. If it's too small, say a few bytes,
1233          * it's better to wait for more credits so we can do a larger write.
1234          */
1235         if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
1236                 dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n",
1237                         __func__, fifo->count, edge_port->txCredits);
1238                 goto exit_send;
1239         }
1240
1241         /* lock this write */
1242         edge_port->write_in_progress = true;
1243
1244         /* get a pointer to the write_urb */
1245         urb = edge_port->write_urb;
1246
1247         /* make sure transfer buffer is freed */
1248         kfree(urb->transfer_buffer);
1249         urb->transfer_buffer = NULL;
1250
1251         /* build the data header for the buffer and port that we are about
1252            to send out */
1253         count = fifo->count;
1254         buffer = kmalloc(count+2, GFP_ATOMIC);
1255         if (!buffer) {
1256                 edge_port->write_in_progress = false;
1257                 goto exit_send;
1258         }
1259         buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count);
1260         buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count);
1261
1262         /* now copy our data */
1263         bytesleft =  fifo->size - fifo->tail;
1264         firsthalf = min(bytesleft, count);
1265         memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
1266         fifo->tail  += firsthalf;
1267         fifo->count -= firsthalf;
1268         if (fifo->tail == fifo->size)
1269                 fifo->tail = 0;
1270
1271         secondhalf = count-firsthalf;
1272         if (secondhalf) {
1273                 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
1274                                                                 secondhalf);
1275                 fifo->tail  += secondhalf;
1276                 fifo->count -= secondhalf;
1277         }
1278
1279         if (count)
1280                 usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]);
1281
1282         /* fill up the urb with all of our data and submit it */
1283         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
1284                         usb_sndbulkpipe(edge_serial->serial->dev,
1285                                         edge_serial->bulk_out_endpoint),
1286                         buffer, count+2,
1287                         edge_bulk_out_data_callback, edge_port);
1288
1289         /* decrement the number of credits we have by the number we just sent */
1290         edge_port->txCredits -= count;
1291         edge_port->port->icount.tx += count;
1292
1293         status = usb_submit_urb(urb, GFP_ATOMIC);
1294         if (status) {
1295                 /* something went wrong */
1296                 dev_err_console(edge_port->port,
1297                         "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
1298                                 __func__, status);
1299                 edge_port->write_in_progress = false;
1300
1301                 /* revert the credits as something bad happened. */
1302                 edge_port->txCredits += count;
1303                 edge_port->port->icount.tx -= count;
1304         }
1305         dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n",
1306                 __func__, count, edge_port->txCredits, fifo->count);
1307
1308 exit_send:
1309         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1310 }
1311
1312
1313 /*****************************************************************************
1314  * edge_write_room
1315  *      this function is called by the tty driver when it wants to know how
1316  *      many bytes of data we can accept for a specific port. If successful,
1317  *      we return the amount of room that we have for this port (the txCredits)
1318  *      otherwise we return a negative error number.
1319  *****************************************************************************/
1320 static int edge_write_room(struct tty_struct *tty)
1321 {
1322         struct usb_serial_port *port = tty->driver_data;
1323         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1324         int room;
1325         unsigned long flags;
1326
1327         if (edge_port == NULL)
1328                 return 0;
1329         if (edge_port->closePending)
1330                 return 0;
1331
1332         if (!edge_port->open) {
1333                 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1334                 return 0;
1335         }
1336
1337         /* total of both buffers is still txCredit */
1338         spin_lock_irqsave(&edge_port->ep_lock, flags);
1339         room = edge_port->txCredits - edge_port->txfifo.count;
1340         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1341
1342         dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
1343         return room;
1344 }
1345
1346
1347 /*****************************************************************************
1348  * edge_chars_in_buffer
1349  *      this function is called by the tty driver when it wants to know how
1350  *      many bytes of data we currently have outstanding in the port (data that
1351  *      has been written, but hasn't made it out the port yet)
1352  *      If successful, we return the number of bytes left to be written in the
1353  *      system,
1354  *      Otherwise we return a negative error number.
1355  *****************************************************************************/
1356 static int edge_chars_in_buffer(struct tty_struct *tty)
1357 {
1358         struct usb_serial_port *port = tty->driver_data;
1359         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1360         int num_chars;
1361         unsigned long flags;
1362
1363         if (edge_port == NULL)
1364                 return 0;
1365         if (edge_port->closePending)
1366                 return 0;
1367
1368         if (!edge_port->open) {
1369                 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1370                 return 0;
1371         }
1372
1373         spin_lock_irqsave(&edge_port->ep_lock, flags);
1374         num_chars = edge_port->maxTxCredits - edge_port->txCredits +
1375                                                 edge_port->txfifo.count;
1376         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1377         if (num_chars) {
1378                 dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars);
1379         }
1380
1381         return num_chars;
1382 }
1383
1384
1385 /*****************************************************************************
1386  * SerialThrottle
1387  *      this function is called by the tty driver when it wants to stop the data
1388  *      being read from the port.
1389  *****************************************************************************/
1390 static void edge_throttle(struct tty_struct *tty)
1391 {
1392         struct usb_serial_port *port = tty->driver_data;
1393         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1394         int status;
1395
1396         if (edge_port == NULL)
1397                 return;
1398
1399         if (!edge_port->open) {
1400                 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1401                 return;
1402         }
1403
1404         /* if we are implementing XON/XOFF, send the stop character */
1405         if (I_IXOFF(tty)) {
1406                 unsigned char stop_char = STOP_CHAR(tty);
1407                 status = edge_write(tty, port, &stop_char, 1);
1408                 if (status <= 0)
1409                         return;
1410         }
1411
1412         /* if we are implementing RTS/CTS, toggle that line */
1413         if (C_CRTSCTS(tty)) {
1414                 edge_port->shadowMCR &= ~MCR_RTS;
1415                 status = send_cmd_write_uart_register(edge_port, MCR,
1416                                                         edge_port->shadowMCR);
1417                 if (status != 0)
1418                         return;
1419         }
1420 }
1421
1422
1423 /*****************************************************************************
1424  * edge_unthrottle
1425  *      this function is called by the tty driver when it wants to resume the
1426  *      data being read from the port (called after SerialThrottle is called)
1427  *****************************************************************************/
1428 static void edge_unthrottle(struct tty_struct *tty)
1429 {
1430         struct usb_serial_port *port = tty->driver_data;
1431         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1432         int status;
1433
1434         if (edge_port == NULL)
1435                 return;
1436
1437         if (!edge_port->open) {
1438                 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1439                 return;
1440         }
1441
1442         /* if we are implementing XON/XOFF, send the start character */
1443         if (I_IXOFF(tty)) {
1444                 unsigned char start_char = START_CHAR(tty);
1445                 status = edge_write(tty, port, &start_char, 1);
1446                 if (status <= 0)
1447                         return;
1448         }
1449         /* if we are implementing RTS/CTS, toggle that line */
1450         if (C_CRTSCTS(tty)) {
1451                 edge_port->shadowMCR |= MCR_RTS;
1452                 send_cmd_write_uart_register(edge_port, MCR,
1453                                                 edge_port->shadowMCR);
1454         }
1455 }
1456
1457
1458 /*****************************************************************************
1459  * SerialSetTermios
1460  *      this function is called by the tty driver when it wants to change
1461  * the termios structure
1462  *****************************************************************************/
1463 static void edge_set_termios(struct tty_struct *tty,
1464         struct usb_serial_port *port, struct ktermios *old_termios)
1465 {
1466         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1467         unsigned int cflag;
1468
1469         cflag = tty->termios.c_cflag;
1470         dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag);
1471         dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag);
1472
1473         if (edge_port == NULL)
1474                 return;
1475
1476         if (!edge_port->open) {
1477                 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1478                 return;
1479         }
1480
1481         /* change the port settings to the new ones specified */
1482         change_port_settings(tty, edge_port, old_termios);
1483 }
1484
1485
1486 /*****************************************************************************
1487  * get_lsr_info - get line status register info
1488  *
1489  * Purpose: Let user call ioctl() to get info when the UART physically
1490  *          is emptied.  On bus types like RS485, the transmitter must
1491  *          release the bus after transmitting. This must be done when
1492  *          the transmit shift register is empty, not be done when the
1493  *          transmit holding register is empty.  This functionality
1494  *          allows an RS485 driver to be written in user space.
1495  *****************************************************************************/
1496 static int get_lsr_info(struct edgeport_port *edge_port,
1497                                                 unsigned int __user *value)
1498 {
1499         unsigned int result = 0;
1500         unsigned long flags;
1501
1502         spin_lock_irqsave(&edge_port->ep_lock, flags);
1503         if (edge_port->maxTxCredits == edge_port->txCredits &&
1504             edge_port->txfifo.count == 0) {
1505                 dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__);
1506                 result = TIOCSER_TEMT;
1507         }
1508         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1509
1510         if (copy_to_user(value, &result, sizeof(int)))
1511                 return -EFAULT;
1512         return 0;
1513 }
1514
1515 static int edge_tiocmset(struct tty_struct *tty,
1516                                         unsigned int set, unsigned int clear)
1517 {
1518         struct usb_serial_port *port = tty->driver_data;
1519         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1520         unsigned int mcr;
1521
1522         mcr = edge_port->shadowMCR;
1523         if (set & TIOCM_RTS)
1524                 mcr |= MCR_RTS;
1525         if (set & TIOCM_DTR)
1526                 mcr |= MCR_DTR;
1527         if (set & TIOCM_LOOP)
1528                 mcr |= MCR_LOOPBACK;
1529
1530         if (clear & TIOCM_RTS)
1531                 mcr &= ~MCR_RTS;
1532         if (clear & TIOCM_DTR)
1533                 mcr &= ~MCR_DTR;
1534         if (clear & TIOCM_LOOP)
1535                 mcr &= ~MCR_LOOPBACK;
1536
1537         edge_port->shadowMCR = mcr;
1538
1539         send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1540
1541         return 0;
1542 }
1543
1544 static int edge_tiocmget(struct tty_struct *tty)
1545 {
1546         struct usb_serial_port *port = tty->driver_data;
1547         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1548         unsigned int result = 0;
1549         unsigned int msr;
1550         unsigned int mcr;
1551
1552         msr = edge_port->shadowMSR;
1553         mcr = edge_port->shadowMCR;
1554         result = ((mcr & MCR_DTR)       ? TIOCM_DTR: 0)   /* 0x002 */
1555                   | ((mcr & MCR_RTS)    ? TIOCM_RTS: 0)   /* 0x004 */
1556                   | ((msr & EDGEPORT_MSR_CTS)   ? TIOCM_CTS: 0)   /* 0x020 */
1557                   | ((msr & EDGEPORT_MSR_CD)    ? TIOCM_CAR: 0)   /* 0x040 */
1558                   | ((msr & EDGEPORT_MSR_RI)    ? TIOCM_RI:  0)   /* 0x080 */
1559                   | ((msr & EDGEPORT_MSR_DSR)   ? TIOCM_DSR: 0);  /* 0x100 */
1560
1561         return result;
1562 }
1563
1564 static int get_serial_info(struct edgeport_port *edge_port,
1565                                 struct serial_struct __user *retinfo)
1566 {
1567         struct serial_struct tmp;
1568
1569         memset(&tmp, 0, sizeof(tmp));
1570
1571         tmp.type                = PORT_16550A;
1572         tmp.line                = edge_port->port->minor;
1573         tmp.port                = edge_port->port->port_number;
1574         tmp.irq                 = 0;
1575         tmp.xmit_fifo_size      = edge_port->maxTxCredits;
1576         tmp.baud_base           = 9600;
1577         tmp.close_delay         = 5*HZ;
1578         tmp.closing_wait        = 30*HZ;
1579
1580         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1581                 return -EFAULT;
1582         return 0;
1583 }
1584
1585
1586 /*****************************************************************************
1587  * SerialIoctl
1588  *      this function handles any ioctl calls to the driver
1589  *****************************************************************************/
1590 static int edge_ioctl(struct tty_struct *tty,
1591                                         unsigned int cmd, unsigned long arg)
1592 {
1593         struct usb_serial_port *port = tty->driver_data;
1594         DEFINE_WAIT(wait);
1595         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1596
1597         switch (cmd) {
1598         case TIOCSERGETLSR:
1599                 dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
1600                 return get_lsr_info(edge_port, (unsigned int __user *) arg);
1601
1602         case TIOCGSERIAL:
1603                 dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
1604                 return get_serial_info(edge_port, (struct serial_struct __user *) arg);
1605         }
1606         return -ENOIOCTLCMD;
1607 }
1608
1609
1610 /*****************************************************************************
1611  * SerialBreak
1612  *      this function sends a break to the port
1613  *****************************************************************************/
1614 static void edge_break(struct tty_struct *tty, int break_state)
1615 {
1616         struct usb_serial_port *port = tty->driver_data;
1617         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1618         struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
1619         int status;
1620
1621         if (!edge_serial->is_epic ||
1622             edge_serial->epic_descriptor.Supports.IOSPChase) {
1623                 /* flush and chase */
1624                 edge_port->chaseResponsePending = true;
1625
1626                 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
1627                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1628                 if (status == 0) {
1629                         /* block until chase finished */
1630                         block_until_chase_response(edge_port);
1631                 } else {
1632                         edge_port->chaseResponsePending = false;
1633                 }
1634         }
1635
1636         if (!edge_serial->is_epic ||
1637             edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) {
1638                 if (break_state == -1) {
1639                         dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
1640                         status = send_iosp_ext_cmd(edge_port,
1641                                                 IOSP_CMD_SET_BREAK, 0);
1642                 } else {
1643                         dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__);
1644                         status = send_iosp_ext_cmd(edge_port,
1645                                                 IOSP_CMD_CLEAR_BREAK, 0);
1646                 }
1647                 if (status)
1648                         dev_dbg(&port->dev, "%s - error sending break set/clear command.\n",
1649                                 __func__);
1650         }
1651 }
1652
1653
1654 /*****************************************************************************
1655  * process_rcvd_data
1656  *      this function handles the data received on the bulk in pipe.
1657  *****************************************************************************/
1658 static void process_rcvd_data(struct edgeport_serial *edge_serial,
1659                                 unsigned char *buffer, __u16 bufferLength)
1660 {
1661         struct device *dev = &edge_serial->serial->dev->dev;
1662         struct usb_serial_port *port;
1663         struct edgeport_port *edge_port;
1664         __u16 lastBufferLength;
1665         __u16 rxLen;
1666
1667         lastBufferLength = bufferLength + 1;
1668
1669         while (bufferLength > 0) {
1670                 /* failsafe incase we get a message that we don't understand */
1671                 if (lastBufferLength == bufferLength) {
1672                         dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__);
1673                         break;
1674                 }
1675                 lastBufferLength = bufferLength;
1676
1677                 switch (edge_serial->rxState) {
1678                 case EXPECT_HDR1:
1679                         edge_serial->rxHeader1 = *buffer;
1680                         ++buffer;
1681                         --bufferLength;
1682
1683                         if (bufferLength == 0) {
1684                                 edge_serial->rxState = EXPECT_HDR2;
1685                                 break;
1686                         }
1687                         /* otherwise, drop on through */
1688                 case EXPECT_HDR2:
1689                         edge_serial->rxHeader2 = *buffer;
1690                         ++buffer;
1691                         --bufferLength;
1692
1693                         dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__,
1694                                 edge_serial->rxHeader1, edge_serial->rxHeader2);
1695                         /* Process depending on whether this header is
1696                          * data or status */
1697
1698                         if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
1699                                 /* Decode this status header and go to
1700                                  * EXPECT_HDR1 (if we can process the status
1701                                  * with only 2 bytes), or go to EXPECT_HDR3 to
1702                                  * get the third byte. */
1703                                 edge_serial->rxPort =
1704                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1705                                 edge_serial->rxStatusCode =
1706                                     IOSP_GET_STATUS_CODE(
1707                                                 edge_serial->rxHeader1);
1708
1709                                 if (!IOSP_STATUS_IS_2BYTE(
1710                                                 edge_serial->rxStatusCode)) {
1711                                         /* This status needs additional bytes.
1712                                          * Save what we have and then wait for
1713                                          * more data.
1714                                          */
1715                                         edge_serial->rxStatusParam
1716                                                 = edge_serial->rxHeader2;
1717                                         edge_serial->rxState = EXPECT_HDR3;
1718                                         break;
1719                                 }
1720                                 /* We have all the header bytes, process the
1721                                    status now */
1722                                 process_rcvd_status(edge_serial,
1723                                                 edge_serial->rxHeader2, 0);
1724                                 edge_serial->rxState = EXPECT_HDR1;
1725                                 break;
1726                         } else {
1727                                 edge_serial->rxPort =
1728                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1729                                 edge_serial->rxBytesRemaining =
1730                                     IOSP_GET_HDR_DATA_LEN(
1731                                                 edge_serial->rxHeader1,
1732                                                 edge_serial->rxHeader2);
1733                                 dev_dbg(dev, "%s - Data for Port %u Len %u\n",
1734                                         __func__,
1735                                         edge_serial->rxPort,
1736                                         edge_serial->rxBytesRemaining);
1737
1738                                 /* ASSERT(DevExt->RxPort < DevExt->NumPorts);
1739                                  * ASSERT(DevExt->RxBytesRemaining <
1740                                  *              IOSP_MAX_DATA_LENGTH);
1741                                  */
1742
1743                                 if (bufferLength == 0) {
1744                                         edge_serial->rxState = EXPECT_DATA;
1745                                         break;
1746                                 }
1747                                 /* Else, drop through */
1748                         }
1749                 case EXPECT_DATA: /* Expect data */
1750                         if (bufferLength < edge_serial->rxBytesRemaining) {
1751                                 rxLen = bufferLength;
1752                                 /* Expect data to start next buffer */
1753                                 edge_serial->rxState = EXPECT_DATA;
1754                         } else {
1755                                 /* BufLen >= RxBytesRemaining */
1756                                 rxLen = edge_serial->rxBytesRemaining;
1757                                 /* Start another header next time */
1758                                 edge_serial->rxState = EXPECT_HDR1;
1759                         }
1760
1761                         bufferLength -= rxLen;
1762                         edge_serial->rxBytesRemaining -= rxLen;
1763
1764                         /* spit this data back into the tty driver if this
1765                            port is open */
1766                         if (rxLen) {
1767                                 port = edge_serial->serial->port[
1768                                                         edge_serial->rxPort];
1769                                 edge_port = usb_get_serial_port_data(port);
1770                                 if (edge_port->open) {
1771                                         dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
1772                                                 __func__, rxLen,
1773                                                 edge_serial->rxPort);
1774                                         edge_tty_recv(edge_port->port, buffer,
1775                                                         rxLen);
1776                                         edge_port->port->icount.rx += rxLen;
1777                                 }
1778                                 buffer += rxLen;
1779                         }
1780                         break;
1781
1782                 case EXPECT_HDR3:       /* Expect 3rd byte of status header */
1783                         edge_serial->rxHeader3 = *buffer;
1784                         ++buffer;
1785                         --bufferLength;
1786
1787                         /* We have all the header bytes, process the
1788                            status now */
1789                         process_rcvd_status(edge_serial,
1790                                 edge_serial->rxStatusParam,
1791                                 edge_serial->rxHeader3);
1792                         edge_serial->rxState = EXPECT_HDR1;
1793                         break;
1794                 }
1795         }
1796 }
1797
1798
1799 /*****************************************************************************
1800  * process_rcvd_status
1801  *      this function handles the any status messages received on the
1802  *      bulk in pipe.
1803  *****************************************************************************/
1804 static void process_rcvd_status(struct edgeport_serial *edge_serial,
1805                                                 __u8 byte2, __u8 byte3)
1806 {
1807         struct usb_serial_port *port;
1808         struct edgeport_port *edge_port;
1809         struct tty_struct *tty;
1810         struct device *dev;
1811         __u8 code = edge_serial->rxStatusCode;
1812
1813         /* switch the port pointer to the one being currently talked about */
1814         port = edge_serial->serial->port[edge_serial->rxPort];
1815         edge_port = usb_get_serial_port_data(port);
1816         if (edge_port == NULL) {
1817                 dev_err(&edge_serial->serial->dev->dev,
1818                         "%s - edge_port == NULL for port %d\n",
1819                                         __func__, edge_serial->rxPort);
1820                 return;
1821         }
1822         dev = &port->dev;
1823
1824         if (code == IOSP_EXT_STATUS) {
1825                 switch (byte2) {
1826                 case IOSP_EXT_STATUS_CHASE_RSP:
1827                         /* we want to do EXT status regardless of port
1828                          * open/closed */
1829                         dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n",
1830                                 __func__, edge_serial->rxPort, byte3);
1831                         /* Currently, the only EXT_STATUS is Chase, so process
1832                          * here instead of one more call to one more subroutine
1833                          * If/when more EXT_STATUS, there'll be more work to do
1834                          * Also, we currently clear flag and close the port
1835                          * regardless of content of above's Byte3.
1836                          * We could choose to do something else when Byte3 says
1837                          * Timeout on Chase from Edgeport, like wait longer in
1838                          * block_until_chase_response, but for now we don't.
1839                          */
1840                         edge_port->chaseResponsePending = false;
1841                         wake_up(&edge_port->wait_chase);
1842                         return;
1843
1844                 case IOSP_EXT_STATUS_RX_CHECK_RSP:
1845                         dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n",
1846                                 __func__, edge_serial->rxPort, byte3);
1847                         /* Port->RxCheckRsp = true; */
1848                         return;
1849                 }
1850         }
1851
1852         if (code == IOSP_STATUS_OPEN_RSP) {
1853                 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
1854                 edge_port->maxTxCredits = edge_port->txCredits;
1855                 dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n",
1856                         __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
1857                 handle_new_msr(edge_port, byte2);
1858
1859                 /* send the current line settings to the port so we are
1860                    in sync with any further termios calls */
1861                 tty = tty_port_tty_get(&edge_port->port->port);
1862                 if (tty) {
1863                         change_port_settings(tty,
1864                                 edge_port, &tty->termios);
1865                         tty_kref_put(tty);
1866                 }
1867
1868                 /* we have completed the open */
1869                 edge_port->openPending = false;
1870                 edge_port->open = true;
1871                 wake_up(&edge_port->wait_open);
1872                 return;
1873         }
1874
1875         /* If port is closed, silently discard all rcvd status. We can
1876          * have cases where buffered status is received AFTER the close
1877          * port command is sent to the Edgeport.
1878          */
1879         if (!edge_port->open || edge_port->closePending)
1880                 return;
1881
1882         switch (code) {
1883         /* Not currently sent by Edgeport */
1884         case IOSP_STATUS_LSR:
1885                 dev_dbg(dev, "%s - Port %u LSR Status = %02x\n",
1886                         __func__, edge_serial->rxPort, byte2);
1887                 handle_new_lsr(edge_port, false, byte2, 0);
1888                 break;
1889
1890         case IOSP_STATUS_LSR_DATA:
1891                 dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n",
1892                         __func__, edge_serial->rxPort, byte2, byte3);
1893                 /* byte2 is LSR Register */
1894                 /* byte3 is broken data byte */
1895                 handle_new_lsr(edge_port, true, byte2, byte3);
1896                 break;
1897         /*
1898          *      case IOSP_EXT_4_STATUS:
1899          *              dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n",
1900          *                      __func__, edge_serial->rxPort, byte2, byte3);
1901          *              break;
1902          */
1903         case IOSP_STATUS_MSR:
1904                 dev_dbg(dev, "%s - Port %u MSR Status = %02x\n",
1905                         __func__, edge_serial->rxPort, byte2);
1906                 /*
1907                  * Process this new modem status and generate appropriate
1908                  * events, etc, based on the new status. This routine
1909                  * also saves the MSR in Port->ShadowMsr.
1910                  */
1911                 handle_new_msr(edge_port, byte2);
1912                 break;
1913
1914         default:
1915                 dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code);
1916                 break;
1917         }
1918 }
1919
1920
1921 /*****************************************************************************
1922  * edge_tty_recv
1923  *      this function passes data on to the tty flip buffer
1924  *****************************************************************************/
1925 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
1926                 int length)
1927 {
1928         int cnt;
1929
1930         cnt = tty_insert_flip_string(&port->port, data, length);
1931         if (cnt < length) {
1932                 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1933                                 __func__, length - cnt);
1934         }
1935         data += cnt;
1936         length -= cnt;
1937
1938         tty_flip_buffer_push(&port->port);
1939 }
1940
1941
1942 /*****************************************************************************
1943  * handle_new_msr
1944  *      this function handles any change to the msr register for a port.
1945  *****************************************************************************/
1946 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
1947 {
1948         struct  async_icount *icount;
1949
1950         if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
1951                         EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
1952                 icount = &edge_port->port->icount;
1953
1954                 /* update input line counters */
1955                 if (newMsr & EDGEPORT_MSR_DELTA_CTS)
1956                         icount->cts++;
1957                 if (newMsr & EDGEPORT_MSR_DELTA_DSR)
1958                         icount->dsr++;
1959                 if (newMsr & EDGEPORT_MSR_DELTA_CD)
1960                         icount->dcd++;
1961                 if (newMsr & EDGEPORT_MSR_DELTA_RI)
1962                         icount->rng++;
1963                 wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
1964         }
1965
1966         /* Save the new modem status */
1967         edge_port->shadowMSR = newMsr & 0xf0;
1968 }
1969
1970
1971 /*****************************************************************************
1972  * handle_new_lsr
1973  *      this function handles any change to the lsr register for a port.
1974  *****************************************************************************/
1975 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
1976                                                         __u8 lsr, __u8 data)
1977 {
1978         __u8 newLsr = (__u8) (lsr & (__u8)
1979                 (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
1980         struct async_icount *icount;
1981
1982         edge_port->shadowLSR = lsr;
1983
1984         if (newLsr & LSR_BREAK) {
1985                 /*
1986                  * Parity and Framing errors only count if they
1987                  * occur exclusive of a break being
1988                  * received.
1989                  */
1990                 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
1991         }
1992
1993         /* Place LSR data byte into Rx buffer */
1994         if (lsrData)
1995                 edge_tty_recv(edge_port->port, &data, 1);
1996
1997         /* update input line counters */
1998         icount = &edge_port->port->icount;
1999         if (newLsr & LSR_BREAK)
2000                 icount->brk++;
2001         if (newLsr & LSR_OVER_ERR)
2002                 icount->overrun++;
2003         if (newLsr & LSR_PAR_ERR)
2004                 icount->parity++;
2005         if (newLsr & LSR_FRM_ERR)
2006                 icount->frame++;
2007 }
2008
2009
2010 /****************************************************************************
2011  * sram_write
2012  *      writes a number of bytes to the Edgeport device's sram starting at the
2013  *      given address.
2014  *      If successful returns the number of bytes written, otherwise it returns
2015  *      a negative error number of the problem.
2016  ****************************************************************************/
2017 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2018                                         __u16 length, const __u8 *data)
2019 {
2020         int result;
2021         __u16 current_length;
2022         unsigned char *transfer_buffer;
2023
2024         dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
2025
2026         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2027         if (!transfer_buffer)
2028                 return -ENOMEM;
2029
2030         /* need to split these writes up into 64 byte chunks */
2031         result = 0;
2032         while (length > 0) {
2033                 if (length > 64)
2034                         current_length = 64;
2035                 else
2036                         current_length = length;
2037
2038 /*              dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */
2039                 memcpy(transfer_buffer, data, current_length);
2040                 result = usb_control_msg(serial->dev,
2041                                         usb_sndctrlpipe(serial->dev, 0),
2042                                         USB_REQUEST_ION_WRITE_RAM,
2043                                         0x40, addr, extAddr, transfer_buffer,
2044                                         current_length, 300);
2045                 if (result < 0)
2046                         break;
2047                 length -= current_length;
2048                 addr += current_length;
2049                 data += current_length;
2050         }
2051
2052         kfree(transfer_buffer);
2053         return result;
2054 }
2055
2056
2057 /****************************************************************************
2058  * rom_write
2059  *      writes a number of bytes to the Edgeport device's ROM starting at the
2060  *      given address.
2061  *      If successful returns the number of bytes written, otherwise it returns
2062  *      a negative error number of the problem.
2063  ****************************************************************************/
2064 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2065                                         __u16 length, const __u8 *data)
2066 {
2067         int result;
2068         __u16 current_length;
2069         unsigned char *transfer_buffer;
2070
2071         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2072         if (!transfer_buffer)
2073                 return -ENOMEM;
2074
2075         /* need to split these writes up into 64 byte chunks */
2076         result = 0;
2077         while (length > 0) {
2078                 if (length > 64)
2079                         current_length = 64;
2080                 else
2081                         current_length = length;
2082                 memcpy(transfer_buffer, data, current_length);
2083                 result = usb_control_msg(serial->dev,
2084                                         usb_sndctrlpipe(serial->dev, 0),
2085                                         USB_REQUEST_ION_WRITE_ROM, 0x40,
2086                                         addr, extAddr,
2087                                         transfer_buffer, current_length, 300);
2088                 if (result < 0)
2089                         break;
2090                 length -= current_length;
2091                 addr += current_length;
2092                 data += current_length;
2093         }
2094
2095         kfree(transfer_buffer);
2096         return result;
2097 }
2098
2099
2100 /****************************************************************************
2101  * rom_read
2102  *      reads a number of bytes from the Edgeport device starting at the given
2103  *      address.
2104  *      Returns zero on success or a negative error number.
2105  ****************************************************************************/
2106 static int rom_read(struct usb_serial *serial, __u16 extAddr,
2107                                         __u16 addr, __u16 length, __u8 *data)
2108 {
2109         int result;
2110         __u16 current_length;
2111         unsigned char *transfer_buffer;
2112
2113         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2114         if (!transfer_buffer)
2115                 return -ENOMEM;
2116
2117         /* need to split these reads up into 64 byte chunks */
2118         result = 0;
2119         while (length > 0) {
2120                 if (length > 64)
2121                         current_length = 64;
2122                 else
2123                         current_length = length;
2124                 result = usb_control_msg(serial->dev,
2125                                         usb_rcvctrlpipe(serial->dev, 0),
2126                                         USB_REQUEST_ION_READ_ROM,
2127                                         0xC0, addr, extAddr, transfer_buffer,
2128                                         current_length, 300);
2129                 if (result < current_length) {
2130                         if (result >= 0)
2131                                 result = -EIO;
2132                         break;
2133                 }
2134                 memcpy(data, transfer_buffer, current_length);
2135                 length -= current_length;
2136                 addr += current_length;
2137                 data += current_length;
2138
2139                 result = 0;
2140         }
2141
2142         kfree(transfer_buffer);
2143         return result;
2144 }
2145
2146
2147 /****************************************************************************
2148  * send_iosp_ext_cmd
2149  *      Is used to send a IOSP message to the Edgeport device
2150  ****************************************************************************/
2151 static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
2152                                                 __u8 command, __u8 param)
2153 {
2154         unsigned char   *buffer;
2155         unsigned char   *currentCommand;
2156         int             length = 0;
2157         int             status = 0;
2158
2159         buffer = kmalloc(10, GFP_ATOMIC);
2160         if (!buffer)
2161                 return -ENOMEM;
2162
2163         currentCommand = buffer;
2164
2165         MAKE_CMD_EXT_CMD(&currentCommand, &length, edge_port->port->port_number,
2166                          command, param);
2167
2168         status = write_cmd_usb(edge_port, buffer, length);
2169         if (status) {
2170                 /* something bad happened, let's free up the memory */
2171                 kfree(buffer);
2172         }
2173
2174         return status;
2175 }
2176
2177
2178 /*****************************************************************************
2179  * write_cmd_usb
2180  *      this function writes the given buffer out to the bulk write endpoint.
2181  *****************************************************************************/
2182 static int write_cmd_usb(struct edgeport_port *edge_port,
2183                                         unsigned char *buffer, int length)
2184 {
2185         struct edgeport_serial *edge_serial =
2186                                 usb_get_serial_data(edge_port->port->serial);
2187         struct device *dev = &edge_port->port->dev;
2188         int status = 0;
2189         struct urb *urb;
2190
2191         usb_serial_debug_data(dev, __func__, length, buffer);
2192
2193         /* Allocate our next urb */
2194         urb = usb_alloc_urb(0, GFP_ATOMIC);
2195         if (!urb)
2196                 return -ENOMEM;
2197
2198         atomic_inc(&CmdUrbs);
2199         dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n",
2200                 __func__, urb, atomic_read(&CmdUrbs));
2201
2202         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
2203                         usb_sndbulkpipe(edge_serial->serial->dev,
2204                                         edge_serial->bulk_out_endpoint),
2205                         buffer, length, edge_bulk_out_cmd_callback, edge_port);
2206
2207         edge_port->commandPending = true;
2208         status = usb_submit_urb(urb, GFP_ATOMIC);
2209
2210         if (status) {
2211                 /* something went wrong */
2212                 dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
2213                         __func__, status);
2214                 usb_kill_urb(urb);
2215                 usb_free_urb(urb);
2216                 atomic_dec(&CmdUrbs);
2217                 return status;
2218         }
2219
2220 #if 0
2221         wait_event(&edge_port->wait_command, !edge_port->commandPending);
2222
2223         if (edge_port->commandPending) {
2224                 /* command timed out */
2225                 dev_dbg(dev, "%s - command timed out\n", __func__);
2226                 status = -EINVAL;
2227         }
2228 #endif
2229         return status;
2230 }
2231
2232
2233 /*****************************************************************************
2234  * send_cmd_write_baud_rate
2235  *      this function sends the proper command to change the baud rate of the
2236  *      specified port.
2237  *****************************************************************************/
2238 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
2239                                                                 int baudRate)
2240 {
2241         struct edgeport_serial *edge_serial =
2242                                 usb_get_serial_data(edge_port->port->serial);
2243         struct device *dev = &edge_port->port->dev;
2244         unsigned char *cmdBuffer;
2245         unsigned char *currCmd;
2246         int cmdLen = 0;
2247         int divisor;
2248         int status;
2249         u32 number = edge_port->port->port_number;
2250
2251         if (edge_serial->is_epic &&
2252             !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
2253                 dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n",
2254                         baudRate);
2255                 return 0;
2256         }
2257
2258         dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate);
2259
2260         status = calc_baud_rate_divisor(dev, baudRate, &divisor);
2261         if (status) {
2262                 dev_err(dev, "%s - bad baud rate\n", __func__);
2263                 return status;
2264         }
2265
2266         /* Alloc memory for the string of commands. */
2267         cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
2268         if (!cmdBuffer)
2269                 return -ENOMEM;
2270
2271         currCmd = cmdBuffer;
2272
2273         /* Enable access to divisor latch */
2274         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
2275
2276         /* Write the divisor itself */
2277         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
2278         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
2279
2280         /* Restore original value to disable access to divisor latch */
2281         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
2282                                                 edge_port->shadowLCR);
2283
2284         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2285         if (status) {
2286                 /* something bad happened, let's free up the memory */
2287                 kfree(cmdBuffer);
2288         }
2289
2290         return status;
2291 }
2292
2293
2294 /*****************************************************************************
2295  * calc_baud_rate_divisor
2296  *      this function calculates the proper baud rate divisor for the specified
2297  *      baud rate.
2298  *****************************************************************************/
2299 static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor)
2300 {
2301         int i;
2302         __u16 custom;
2303
2304         for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
2305                 if (divisor_table[i].BaudRate == baudrate) {
2306                         *divisor = divisor_table[i].Divisor;
2307                         return 0;
2308                 }
2309         }
2310
2311         /* We have tried all of the standard baud rates
2312          * lets try to calculate the divisor for this baud rate
2313          * Make sure the baud rate is reasonable */
2314         if (baudrate > 50 && baudrate < 230400) {
2315                 /* get divisor */
2316                 custom = (__u16)((230400L + baudrate/2) / baudrate);
2317
2318                 *divisor = custom;
2319
2320                 dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom);
2321                 return 0;
2322         }
2323
2324         return -1;
2325 }
2326
2327
2328 /*****************************************************************************
2329  * send_cmd_write_uart_register
2330  *  this function builds up a uart register message and sends to the device.
2331  *****************************************************************************/
2332 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
2333                                                 __u8 regNum, __u8 regValue)
2334 {
2335         struct edgeport_serial *edge_serial =
2336                                 usb_get_serial_data(edge_port->port->serial);
2337         struct device *dev = &edge_port->port->dev;
2338         unsigned char *cmdBuffer;
2339         unsigned char *currCmd;
2340         unsigned long cmdLen = 0;
2341         int status;
2342
2343         dev_dbg(dev, "%s - write to %s register 0x%02x\n",
2344                 (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
2345
2346         if (edge_serial->is_epic &&
2347             !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
2348             regNum == MCR) {
2349                 dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n");
2350                 return 0;
2351         }
2352
2353         if (edge_serial->is_epic &&
2354             !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
2355             regNum == LCR) {
2356                 dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n");
2357                 return 0;
2358         }
2359
2360         /* Alloc memory for the string of commands. */
2361         cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
2362         if (cmdBuffer == NULL)
2363                 return -ENOMEM;
2364
2365         currCmd = cmdBuffer;
2366
2367         /* Build a cmd in the buffer to write the given register */
2368         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number,
2369                            regNum, regValue);
2370
2371         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2372         if (status) {
2373                 /* something bad happened, let's free up the memory */
2374                 kfree(cmdBuffer);
2375         }
2376
2377         return status;
2378 }
2379
2380
2381 /*****************************************************************************
2382  * change_port_settings
2383  *      This routine is called to set the UART on the device to match the
2384  *      specified new settings.
2385  *****************************************************************************/
2386
2387 static void change_port_settings(struct tty_struct *tty,
2388         struct edgeport_port *edge_port, struct ktermios *old_termios)
2389 {
2390         struct device *dev = &edge_port->port->dev;
2391         struct edgeport_serial *edge_serial =
2392                         usb_get_serial_data(edge_port->port->serial);
2393         int baud;
2394         unsigned cflag;
2395         __u8 mask = 0xff;
2396         __u8 lData;
2397         __u8 lParity;
2398         __u8 lStop;
2399         __u8 rxFlow;
2400         __u8 txFlow;
2401         int status;
2402
2403         if (!edge_port->open &&
2404             !edge_port->openPending) {
2405                 dev_dbg(dev, "%s - port not opened\n", __func__);
2406                 return;
2407         }
2408
2409         cflag = tty->termios.c_cflag;
2410
2411         switch (cflag & CSIZE) {
2412         case CS5:
2413                 lData = LCR_BITS_5; mask = 0x1f;
2414                 dev_dbg(dev, "%s - data bits = 5\n", __func__);
2415                 break;
2416         case CS6:
2417                 lData = LCR_BITS_6; mask = 0x3f;
2418                 dev_dbg(dev, "%s - data bits = 6\n", __func__);
2419                 break;
2420         case CS7:
2421                 lData = LCR_BITS_7; mask = 0x7f;
2422                 dev_dbg(dev, "%s - data bits = 7\n", __func__);
2423                 break;
2424         default:
2425         case CS8:
2426                 lData = LCR_BITS_8;
2427                 dev_dbg(dev, "%s - data bits = 8\n", __func__);
2428                 break;
2429         }
2430
2431         lParity = LCR_PAR_NONE;
2432         if (cflag & PARENB) {
2433                 if (cflag & CMSPAR) {
2434                         if (cflag & PARODD) {
2435                                 lParity = LCR_PAR_MARK;
2436                                 dev_dbg(dev, "%s - parity = mark\n", __func__);
2437                         } else {
2438                                 lParity = LCR_PAR_SPACE;
2439                                 dev_dbg(dev, "%s - parity = space\n", __func__);
2440                         }
2441                 } else if (cflag & PARODD) {
2442                         lParity = LCR_PAR_ODD;
2443                         dev_dbg(dev, "%s - parity = odd\n", __func__);
2444                 } else {
2445                         lParity = LCR_PAR_EVEN;
2446                         dev_dbg(dev, "%s - parity = even\n", __func__);
2447                 }
2448         } else {
2449                 dev_dbg(dev, "%s - parity = none\n", __func__);
2450         }
2451
2452         if (cflag & CSTOPB) {
2453                 lStop = LCR_STOP_2;
2454                 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
2455         } else {
2456                 lStop = LCR_STOP_1;
2457                 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
2458         }
2459
2460         /* figure out the flow control settings */
2461         rxFlow = txFlow = 0x00;
2462         if (cflag & CRTSCTS) {
2463                 rxFlow |= IOSP_RX_FLOW_RTS;
2464                 txFlow |= IOSP_TX_FLOW_CTS;
2465                 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
2466         } else {
2467                 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
2468         }
2469
2470         /* if we are implementing XON/XOFF, set the start and stop character
2471            in the device */
2472         if (I_IXOFF(tty) || I_IXON(tty)) {
2473                 unsigned char stop_char  = STOP_CHAR(tty);
2474                 unsigned char start_char = START_CHAR(tty);
2475
2476                 if (!edge_serial->is_epic ||
2477                     edge_serial->epic_descriptor.Supports.IOSPSetXChar) {
2478                         send_iosp_ext_cmd(edge_port,
2479                                         IOSP_CMD_SET_XON_CHAR, start_char);
2480                         send_iosp_ext_cmd(edge_port,
2481                                         IOSP_CMD_SET_XOFF_CHAR, stop_char);
2482                 }
2483
2484                 /* if we are implementing INBOUND XON/XOFF */
2485                 if (I_IXOFF(tty)) {
2486                         rxFlow |= IOSP_RX_FLOW_XON_XOFF;
2487                         dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2488                                 __func__, start_char, stop_char);
2489                 } else {
2490                         dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
2491                 }
2492
2493                 /* if we are implementing OUTBOUND XON/XOFF */
2494                 if (I_IXON(tty)) {
2495                         txFlow |= IOSP_TX_FLOW_XON_XOFF;
2496                         dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2497                                 __func__, start_char, stop_char);
2498                 } else {
2499                         dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
2500                 }
2501         }
2502
2503         /* Set flow control to the configured value */
2504         if (!edge_serial->is_epic ||
2505             edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)
2506                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
2507         if (!edge_serial->is_epic ||
2508             edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)
2509                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
2510
2511
2512         edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2513         edge_port->shadowLCR |= (lData | lParity | lStop);
2514
2515         edge_port->validDataMask = mask;
2516
2517         /* Send the updated LCR value to the EdgePort */
2518         status = send_cmd_write_uart_register(edge_port, LCR,
2519                                                         edge_port->shadowLCR);
2520         if (status != 0)
2521                 return;
2522
2523         /* set up the MCR register and send it to the EdgePort */
2524         edge_port->shadowMCR = MCR_MASTER_IE;
2525         if (cflag & CBAUD)
2526                 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2527
2528         status = send_cmd_write_uart_register(edge_port, MCR,
2529                                                 edge_port->shadowMCR);
2530         if (status != 0)
2531                 return;
2532
2533         /* Determine divisor based on baud rate */
2534         baud = tty_get_baud_rate(tty);
2535         if (!baud) {
2536                 /* pick a default, any default... */
2537                 baud = 9600;
2538         }
2539
2540         dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
2541         status = send_cmd_write_baud_rate(edge_port, baud);
2542         if (status == -1) {
2543                 /* Speed change was not possible - put back the old speed */
2544                 baud = tty_termios_baud_rate(old_termios);
2545                 tty_encode_baud_rate(tty, baud, baud);
2546         }
2547 }
2548
2549
2550 /****************************************************************************
2551  * unicode_to_ascii
2552  *      Turns a string from Unicode into ASCII.
2553  *      Doesn't do a good job with any characters that are outside the normal
2554  *      ASCII range, but it's only for debugging...
2555  *      NOTE: expects the unicode in LE format
2556  ****************************************************************************/
2557 static void unicode_to_ascii(char *string, int buflen,
2558                                         __le16 *unicode, int unicode_size)
2559 {
2560         int i;
2561
2562         if (buflen <= 0)        /* never happens, but... */
2563                 return;
2564         --buflen;               /* space for nul */
2565
2566         for (i = 0; i < unicode_size; i++) {
2567                 if (i >= buflen)
2568                         break;
2569                 string[i] = (char)(le16_to_cpu(unicode[i]));
2570         }
2571         string[i] = 0x00;
2572 }
2573
2574
2575 /****************************************************************************
2576  * get_manufacturing_desc
2577  *      reads in the manufacturing descriptor and stores it into the serial
2578  *      structure.
2579  ****************************************************************************/
2580 static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
2581 {
2582         struct device *dev = &edge_serial->serial->dev->dev;
2583         int response;
2584
2585         dev_dbg(dev, "getting manufacturer descriptor\n");
2586
2587         response = rom_read(edge_serial->serial,
2588                                 (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
2589                                 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
2590                                 EDGE_MANUF_DESC_LEN,
2591                                 (__u8 *)(&edge_serial->manuf_descriptor));
2592
2593         if (response < 0) {
2594                 dev_err(dev, "error in getting manufacturer descriptor: %d\n",
2595                                 response);
2596         } else {
2597                 char string[30];
2598                 dev_dbg(dev, "**Manufacturer Descriptor\n");
2599                 dev_dbg(dev, "  RomSize:        %dK\n",
2600                         edge_serial->manuf_descriptor.RomSize);
2601                 dev_dbg(dev, "  RamSize:        %dK\n",
2602                         edge_serial->manuf_descriptor.RamSize);
2603                 dev_dbg(dev, "  CpuRev:         %d\n",
2604                         edge_serial->manuf_descriptor.CpuRev);
2605                 dev_dbg(dev, "  BoardRev:       %d\n",
2606                         edge_serial->manuf_descriptor.BoardRev);
2607                 dev_dbg(dev, "  NumPorts:       %d\n",
2608                         edge_serial->manuf_descriptor.NumPorts);
2609                 dev_dbg(dev, "  DescDate:       %d/%d/%d\n",
2610                         edge_serial->manuf_descriptor.DescDate[0],
2611                         edge_serial->manuf_descriptor.DescDate[1],
2612                         edge_serial->manuf_descriptor.DescDate[2]+1900);
2613                 unicode_to_ascii(string, sizeof(string),
2614                         edge_serial->manuf_descriptor.SerialNumber,
2615                         edge_serial->manuf_descriptor.SerNumLength/2);
2616                 dev_dbg(dev, "  SerialNumber: %s\n", string);
2617                 unicode_to_ascii(string, sizeof(string),
2618                         edge_serial->manuf_descriptor.AssemblyNumber,
2619                         edge_serial->manuf_descriptor.AssemblyNumLength/2);
2620                 dev_dbg(dev, "  AssemblyNumber: %s\n", string);
2621                 unicode_to_ascii(string, sizeof(string),
2622                     edge_serial->manuf_descriptor.OemAssyNumber,
2623                     edge_serial->manuf_descriptor.OemAssyNumLength/2);
2624                 dev_dbg(dev, "  OemAssyNumber:  %s\n", string);
2625                 dev_dbg(dev, "  UartType:       %d\n",
2626                         edge_serial->manuf_descriptor.UartType);
2627                 dev_dbg(dev, "  IonPid:         %d\n",
2628                         edge_serial->manuf_descriptor.IonPid);
2629                 dev_dbg(dev, "  IonConfig:      %d\n",
2630                         edge_serial->manuf_descriptor.IonConfig);
2631         }
2632 }
2633
2634
2635 /****************************************************************************
2636  * get_boot_desc
2637  *      reads in the bootloader descriptor and stores it into the serial
2638  *      structure.
2639  ****************************************************************************/
2640 static void get_boot_desc(struct edgeport_serial *edge_serial)
2641 {
2642         struct device *dev = &edge_serial->serial->dev->dev;
2643         int response;
2644
2645         dev_dbg(dev, "getting boot descriptor\n");
2646
2647         response = rom_read(edge_serial->serial,
2648                                 (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
2649                                 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
2650                                 EDGE_BOOT_DESC_LEN,
2651                                 (__u8 *)(&edge_serial->boot_descriptor));
2652
2653         if (response < 0) {
2654                 dev_err(dev, "error in getting boot descriptor: %d\n",
2655                                 response);
2656         } else {
2657                 dev_dbg(dev, "**Boot Descriptor:\n");
2658                 dev_dbg(dev, "  BootCodeLength: %d\n",
2659                         le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
2660                 dev_dbg(dev, "  MajorVersion:   %d\n",
2661                         edge_serial->boot_descriptor.MajorVersion);
2662                 dev_dbg(dev, "  MinorVersion:   %d\n",
2663                         edge_serial->boot_descriptor.MinorVersion);
2664                 dev_dbg(dev, "  BuildNumber:    %d\n",
2665                         le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
2666                 dev_dbg(dev, "  Capabilities:   0x%x\n",
2667                       le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
2668                 dev_dbg(dev, "  UConfig0:       %d\n",
2669                         edge_serial->boot_descriptor.UConfig0);
2670                 dev_dbg(dev, "  UConfig1:       %d\n",
2671                         edge_serial->boot_descriptor.UConfig1);
2672         }
2673 }
2674
2675
2676 /****************************************************************************
2677  * load_application_firmware
2678  *      This is called to load the application firmware to the device
2679  ****************************************************************************/
2680 static void load_application_firmware(struct edgeport_serial *edge_serial)
2681 {
2682         struct device *dev = &edge_serial->serial->dev->dev;
2683         const struct ihex_binrec *rec;
2684         const struct firmware *fw;
2685         const char *fw_name;
2686         const char *fw_info;
2687         int response;
2688         __u32 Operaddr;
2689         __u16 build;
2690
2691         switch (edge_serial->product_info.iDownloadFile) {
2692                 case EDGE_DOWNLOAD_FILE_I930:
2693                         fw_info = "downloading firmware version (930)";
2694                         fw_name = "edgeport/down.fw";
2695                         break;
2696
2697                 case EDGE_DOWNLOAD_FILE_80251:
2698                         fw_info = "downloading firmware version (80251)";
2699                         fw_name = "edgeport/down2.fw";
2700                         break;
2701
2702                 case EDGE_DOWNLOAD_FILE_NONE:
2703                         dev_dbg(dev, "No download file specified, skipping download\n");
2704                         return;
2705
2706                 default:
2707                         return;
2708         }
2709
2710         response = request_ihex_firmware(&fw, fw_name,
2711                                     &edge_serial->serial->dev->dev);
2712         if (response) {
2713                 dev_err(dev, "Failed to load image \"%s\" err %d\n",
2714                        fw_name, response);
2715                 return;
2716         }
2717
2718         rec = (const struct ihex_binrec *)fw->data;
2719         build = (rec->data[2] << 8) | rec->data[3];
2720
2721         dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build);
2722
2723         edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
2724         edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
2725         edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
2726
2727         for (rec = ihex_next_binrec(rec); rec;
2728              rec = ihex_next_binrec(rec)) {
2729                 Operaddr = be32_to_cpu(rec->addr);
2730                 response = sram_write(edge_serial->serial,
2731                                      Operaddr >> 16,
2732                                      Operaddr & 0xFFFF,
2733                                      be16_to_cpu(rec->len),
2734                                      &rec->data[0]);
2735                 if (response < 0) {
2736                         dev_err(&edge_serial->serial->dev->dev,
2737                                 "sram_write failed (%x, %x, %d)\n",
2738                                 Operaddr >> 16, Operaddr & 0xFFFF,
2739                                 be16_to_cpu(rec->len));
2740                         break;
2741                 }
2742         }
2743
2744         dev_dbg(dev, "sending exec_dl_code\n");
2745         response = usb_control_msg (edge_serial->serial->dev,
2746                                     usb_sndctrlpipe(edge_serial->serial->dev, 0),
2747                                     USB_REQUEST_ION_EXEC_DL_CODE,
2748                                     0x40, 0x4000, 0x0001, NULL, 0, 3000);
2749
2750         release_firmware(fw);
2751 }
2752
2753
2754 /****************************************************************************
2755  * edge_startup
2756  ****************************************************************************/
2757 static int edge_startup(struct usb_serial *serial)
2758 {
2759         struct edgeport_serial *edge_serial;
2760         struct usb_device *dev;
2761         struct device *ddev = &serial->dev->dev;
2762         int i;
2763         int response;
2764         bool interrupt_in_found;
2765         bool bulk_in_found;
2766         bool bulk_out_found;
2767         static __u32 descriptor[3] = {  EDGE_COMPATIBILITY_MASK0,
2768                                         EDGE_COMPATIBILITY_MASK1,
2769                                         EDGE_COMPATIBILITY_MASK2 };
2770
2771         if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
2772                 dev_err(&serial->interface->dev, "missing endpoints\n");
2773                 return -ENODEV;
2774         }
2775
2776         dev = serial->dev;
2777
2778         /* create our private serial structure */
2779         edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2780         if (!edge_serial)
2781                 return -ENOMEM;
2782
2783         spin_lock_init(&edge_serial->es_lock);
2784         edge_serial->serial = serial;
2785         usb_set_serial_data(serial, edge_serial);
2786
2787         /* get the name for the device from the device */
2788         i = usb_string(dev, dev->descriptor.iManufacturer,
2789             &edge_serial->name[0], MAX_NAME_LEN+1);
2790         if (i < 0)
2791                 i = 0;
2792         edge_serial->name[i++] = ' ';
2793         usb_string(dev, dev->descriptor.iProduct,
2794             &edge_serial->name[i], MAX_NAME_LEN+2 - i);
2795
2796         dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
2797
2798         /* Read the epic descriptor */
2799         if (get_epic_descriptor(edge_serial) < 0) {
2800                 /* memcpy descriptor to Supports structures */
2801                 memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
2802                        sizeof(struct edge_compatibility_bits));
2803
2804                 /* get the manufacturing descriptor for this device */
2805                 get_manufacturing_desc(edge_serial);
2806
2807                 /* get the boot descriptor */
2808                 get_boot_desc(edge_serial);
2809
2810                 get_product_info(edge_serial);
2811         }
2812
2813         /* set the number of ports from the manufacturing description */
2814         /* serial->num_ports = serial->product_info.NumPorts; */
2815         if ((!edge_serial->is_epic) &&
2816             (edge_serial->product_info.NumPorts != serial->num_ports)) {
2817                 dev_warn(ddev,
2818                         "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n",
2819                          edge_serial->product_info.NumPorts,
2820                          serial->num_ports);
2821         }
2822
2823         dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies);
2824
2825         /* If not an EPiC device */
2826         if (!edge_serial->is_epic) {
2827                 /* now load the application firmware into this device */
2828                 load_application_firmware(edge_serial);
2829
2830                 dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies);
2831
2832                 /* Check current Edgeport EEPROM and update if necessary */
2833                 update_edgeport_E2PROM(edge_serial);
2834
2835                 dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies);
2836
2837                 /* set the configuration to use #1 */
2838 /*              dev_dbg(ddev, "set_configuration 1\n"); */
2839 /*              usb_set_configuration (dev, 1); */
2840         }
2841         dev_dbg(ddev, "  FirmwareMajorVersion  %d.%d.%d\n",
2842             edge_serial->product_info.FirmwareMajorVersion,
2843             edge_serial->product_info.FirmwareMinorVersion,
2844             le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
2845
2846         /* we set up the pointers to the endpoints in the edge_open function,
2847          * as the structures aren't created yet. */
2848
2849         response = 0;
2850
2851         if (edge_serial->is_epic) {
2852                 /* EPIC thing, set up our interrupt polling now and our read
2853                  * urb, so that the device knows it really is connected. */
2854                 interrupt_in_found = bulk_in_found = bulk_out_found = false;
2855                 for (i = 0; i < serial->interface->altsetting[0]
2856                                                 .desc.bNumEndpoints; ++i) {
2857                         struct usb_endpoint_descriptor *endpoint;
2858                         int buffer_size;
2859
2860                         endpoint = &serial->interface->altsetting[0].
2861                                                         endpoint[i].desc;
2862                         buffer_size = usb_endpoint_maxp(endpoint);
2863                         if (!interrupt_in_found &&
2864                             (usb_endpoint_is_int_in(endpoint))) {
2865                                 /* we found a interrupt in endpoint */
2866                                 dev_dbg(ddev, "found interrupt in\n");
2867
2868                                 /* not set up yet, so do it now */
2869                                 edge_serial->interrupt_read_urb =
2870                                                 usb_alloc_urb(0, GFP_KERNEL);
2871                                 if (!edge_serial->interrupt_read_urb) {
2872                                         response = -ENOMEM;
2873                                         break;
2874                                 }
2875
2876                                 edge_serial->interrupt_in_buffer =
2877                                         kmalloc(buffer_size, GFP_KERNEL);
2878                                 if (!edge_serial->interrupt_in_buffer) {
2879                                         response = -ENOMEM;
2880                                         break;
2881                                 }
2882                                 edge_serial->interrupt_in_endpoint =
2883                                                 endpoint->bEndpointAddress;
2884
2885                                 /* set up our interrupt urb */
2886                                 usb_fill_int_urb(
2887                                         edge_serial->interrupt_read_urb,
2888                                         dev,
2889                                         usb_rcvintpipe(dev,
2890                                                 endpoint->bEndpointAddress),
2891                                         edge_serial->interrupt_in_buffer,
2892                                         buffer_size,
2893                                         edge_interrupt_callback,
2894                                         edge_serial,
2895                                         endpoint->bInterval);
2896
2897                                 interrupt_in_found = true;
2898                         }
2899
2900                         if (!bulk_in_found &&
2901                                 (usb_endpoint_is_bulk_in(endpoint))) {
2902                                 /* we found a bulk in endpoint */
2903                                 dev_dbg(ddev, "found bulk in\n");
2904
2905                                 /* not set up yet, so do it now */
2906                                 edge_serial->read_urb =
2907                                                 usb_alloc_urb(0, GFP_KERNEL);
2908                                 if (!edge_serial->read_urb) {
2909                                         response = -ENOMEM;
2910                                         break;
2911                                 }
2912
2913                                 edge_serial->bulk_in_buffer =
2914                                         kmalloc(buffer_size, GFP_KERNEL);
2915                                 if (!edge_serial->bulk_in_buffer) {
2916                                         response = -ENOMEM;
2917                                         break;
2918                                 }
2919                                 edge_serial->bulk_in_endpoint =
2920                                                 endpoint->bEndpointAddress;
2921
2922                                 /* set up our bulk in urb */
2923                                 usb_fill_bulk_urb(edge_serial->read_urb, dev,
2924                                         usb_rcvbulkpipe(dev,
2925                                                 endpoint->bEndpointAddress),
2926                                         edge_serial->bulk_in_buffer,
2927                                         usb_endpoint_maxp(endpoint),
2928                                         edge_bulk_in_callback,
2929                                         edge_serial);
2930                                 bulk_in_found = true;
2931                         }
2932
2933                         if (!bulk_out_found &&
2934                             (usb_endpoint_is_bulk_out(endpoint))) {
2935                                 /* we found a bulk out endpoint */
2936                                 dev_dbg(ddev, "found bulk out\n");
2937                                 edge_serial->bulk_out_endpoint =
2938                                                 endpoint->bEndpointAddress;
2939                                 bulk_out_found = true;
2940                         }
2941                 }
2942
2943                 if (response || !interrupt_in_found || !bulk_in_found ||
2944                                                         !bulk_out_found) {
2945                         if (!response) {
2946                                 dev_err(ddev, "expected endpoints not found\n");
2947                                 response = -ENODEV;
2948                         }
2949
2950                         usb_free_urb(edge_serial->interrupt_read_urb);
2951                         kfree(edge_serial->interrupt_in_buffer);
2952
2953                         usb_free_urb(edge_serial->read_urb);
2954                         kfree(edge_serial->bulk_in_buffer);
2955
2956                         kfree(edge_serial);
2957
2958                         return response;
2959                 }
2960
2961                 /* start interrupt read for this edgeport this interrupt will
2962                  * continue as long as the edgeport is connected */
2963                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
2964                                                                 GFP_KERNEL);
2965                 if (response)
2966                         dev_err(ddev, "%s - Error %d submitting control urb\n",
2967                                 __func__, response);
2968         }
2969         return response;
2970 }
2971
2972
2973 /****************************************************************************
2974  * edge_disconnect
2975  *      This function is called whenever the device is removed from the usb bus.
2976  ****************************************************************************/
2977 static void edge_disconnect(struct usb_serial *serial)
2978 {
2979         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2980
2981         if (edge_serial->is_epic) {
2982                 usb_kill_urb(edge_serial->interrupt_read_urb);
2983                 usb_kill_urb(edge_serial->read_urb);
2984         }
2985 }
2986
2987
2988 /****************************************************************************
2989  * edge_release
2990  *      This function is called when the device structure is deallocated.
2991  ****************************************************************************/
2992 static void edge_release(struct usb_serial *serial)
2993 {
2994         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2995
2996         if (edge_serial->is_epic) {
2997                 usb_kill_urb(edge_serial->interrupt_read_urb);
2998                 usb_free_urb(edge_serial->interrupt_read_urb);
2999                 kfree(edge_serial->interrupt_in_buffer);
3000
3001                 usb_kill_urb(edge_serial->read_urb);
3002                 usb_free_urb(edge_serial->read_urb);
3003                 kfree(edge_serial->bulk_in_buffer);
3004         }
3005
3006         kfree(edge_serial);
3007 }
3008
3009 static int edge_port_probe(struct usb_serial_port *port)
3010 {
3011         struct edgeport_port *edge_port;
3012
3013         edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
3014         if (!edge_port)
3015                 return -ENOMEM;
3016
3017         spin_lock_init(&edge_port->ep_lock);
3018         edge_port->port = port;
3019
3020         usb_set_serial_port_data(port, edge_port);
3021
3022         return 0;
3023 }
3024
3025 static int edge_port_remove(struct usb_serial_port *port)
3026 {
3027         struct edgeport_port *edge_port;
3028
3029         edge_port = usb_get_serial_port_data(port);
3030         kfree(edge_port);
3031
3032         return 0;
3033 }
3034
3035 module_usb_serial_driver(serial_drivers, id_table_combined);
3036
3037 MODULE_AUTHOR(DRIVER_AUTHOR);
3038 MODULE_DESCRIPTION(DRIVER_DESC);
3039 MODULE_LICENSE("GPL");
3040 MODULE_FIRMWARE("edgeport/boot.fw");
3041 MODULE_FIRMWARE("edgeport/boot2.fw");
3042 MODULE_FIRMWARE("edgeport/down.fw");
3043 MODULE_FIRMWARE("edgeport/down2.fw");