1 /* Driver for USB Mass Storage compliant devices
4 * Current development and maintenance by:
5 * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
8 * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
10 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
11 * information about this driver.
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2, or (at your option) any
18 * This program is distributed in the hope that it will be useful, but
19 * WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 * General Public License for more details.
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
28 /* IMPORTANT NOTE: This file must be included in another file which does
29 * the following thing for it to work:
30 * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
31 * before this file is included.
34 /* If you edit this file, please try to keep it sorted first by VendorID,
37 * If you want to add an entry for this file, be sure to include the
38 * following information:
39 * - a patch that adds the entry for your device, including your
40 * email address right above the entry (plus maybe a brief
41 * explanation of the reason for the entry),
42 * - a copy of /proc/bus/usb/devices with your device plugged in
43 * running with this patch.
44 * Send your submission to either Phil Dibowitz <phil@ipom.com> or
45 * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
46 * USB development list <linux-usb@vger.kernel.org> and the USB storage list
47 * <usb-storage@lists.one-eyed-alien.net>
50 /* Note: If you add an entry only in order to set the CAPACITY_OK flag,
51 * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
52 * because such entries mark devices which actually work correctly,
53 * as opposed to devices that do something strangely or wrongly.
56 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \
57 !defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
61 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
63 UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
66 US_SC_DEVICE, US_PR_DEVICE, NULL,
67 US_FL_IGNORE_RESIDUE),
69 /* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
70 UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200,
73 US_SC_DEVICE, US_PR_DEVICE, NULL,
76 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
77 UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
78 "VIA Technologies Inc.",
79 "Mitsumi multi cardreader",
80 US_SC_DEVICE, US_PR_DEVICE, NULL,
81 US_FL_IGNORE_RESIDUE ),
83 UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
86 US_SC_8070, US_PR_CB, NULL, 0),
88 /* Reported by Ben Efros <ben@pc-doctor.com> */
89 UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
91 "Personal Media Drive",
92 US_SC_DEVICE, US_PR_DEVICE, NULL,
95 /* Reported by Grant Grundler <grundler@parisc-linux.org>
96 * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
98 UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
101 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
103 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
104 * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
105 * for USB floppies that need the SINGLE_LUN enforcement.
107 UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
110 US_SC_DEVICE, US_PR_DEVICE, NULL,
113 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
114 UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
115 "VIA Technologies Inc.",
116 "USB 2.0 Card Reader",
117 US_SC_DEVICE, US_PR_DEVICE, NULL,
118 US_FL_IGNORE_RESIDUE ),
120 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
121 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
122 * always fails and confuses drive.
124 UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
127 US_SC_DEVICE, US_PR_DEVICE, NULL,
130 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
131 UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
132 "Samsung Info. Systems America, Inc.",
134 US_SC_DEVICE, US_PR_DEVICE, NULL,
135 US_FL_IGNORE_RESIDUE ),
137 /* Reported by Orgad Shaneh <orgads@gmail.com> */
138 UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
139 "Samsung", "MP3 Player",
140 US_SC_DEVICE, US_PR_DEVICE, NULL,
141 US_FL_IGNORE_RESIDUE ),
143 /* Reported by Christian Leber <christian@leber.de> */
144 UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
147 US_SC_DEVICE, US_PR_DEVICE, NULL,
148 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
150 /* Reported by Stefan Werner <dustbln@gmx.de> */
151 UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
154 US_SC_DEVICE, US_PR_DEVICE, NULL,
155 US_FL_IGNORE_RESIDUE ),
157 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
158 UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
159 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
160 US_SC_DEVICE, US_PR_DEVICE, NULL,
161 US_FL_IGNORE_RESIDUE ),
163 /* Reported by Andrew Nayenko <relan@bk.ru>
164 * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
165 UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
168 US_SC_DEVICE, US_PR_DEVICE, NULL,
169 US_FL_MAX_SECTORS_64 ),
171 /* Reported by Mario Rettig <mariorettig@web.de> */
172 UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
175 US_SC_DEVICE, US_PR_DEVICE, NULL,
176 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
178 /* Reported by <honkkis@gmail.com> */
179 UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
182 US_SC_DEVICE, US_PR_DEVICE, NULL,
183 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
185 /* Reported by Jon Hart <Jon.Hart@web.de> */
186 UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
189 US_SC_DEVICE, US_PR_DEVICE, NULL,
190 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
192 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
193 * Einar Th. Einarsson <einarthered@gmail.com> */
194 UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
197 US_SC_DEVICE, US_PR_DEVICE, NULL,
198 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
200 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
201 * Rene C. Castberg <Rene@Castberg.org> */
202 UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
205 US_SC_DEVICE, US_PR_DEVICE, NULL,
206 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
208 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
209 UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
212 US_SC_DEVICE, US_PR_DEVICE, NULL,
213 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
215 /* Reported by Bardur Arantsson <bardur@scientician.net> */
216 UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
219 US_SC_DEVICE, US_PR_DEVICE, NULL,
220 US_FL_MAX_SECTORS_64 ),
222 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
223 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
226 US_SC_DEVICE, US_PR_DEVICE, NULL,
227 US_FL_MAX_SECTORS_64 ),
229 /* Reported by Alex Corcoles <alex@corcoles.net> */
230 UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
233 US_SC_DEVICE, US_PR_DEVICE, NULL,
234 US_FL_MAX_SECTORS_64 ),
236 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
237 UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
240 US_SC_DEVICE, US_PR_DEVICE, NULL,
244 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
247 US_SC_SCSI, US_PR_CB, NULL,
251 /* Patch submitted by Daniel Drake <dsd@gentoo.org>
252 * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
253 UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
256 US_SC_DEVICE, US_PR_BULK, NULL,
257 US_FL_NEED_OVERRIDE ),
260 * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
261 * The key does not actually break, but it returns zero sense which
262 * makes our SCSI stack to print confusing messages.
264 UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
265 "USBest Technology", /* sold by Transcend */
266 "USB Mass Storage Device",
267 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
270 * Bohdan Linda <bohdan.linda@gmail.com>
271 * 1GB USB sticks MyFlash High Speed. I have restricted
272 * the revision to my model only
274 UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
277 US_SC_DEVICE, US_PR_DEVICE, NULL,
278 US_FL_NOT_LOCKABLE ),
280 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
281 * Obviously the PROM has not been customized by the VAR;
282 * the Vendor and Product string descriptors are:
283 * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
284 * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
286 UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
289 US_SC_DEVICE, US_PR_DEVICE, NULL,
290 US_FL_MAX_SECTORS_64 ),
293 * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
294 * Reported by Pete Zaitcev <zaitcev@redhat.com>
295 * This device chokes on both version of MODE SENSE which we have, so
296 * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
298 UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
301 US_SC_DEVICE, US_PR_DEVICE, NULL,
304 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
305 UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
308 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
310 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
311 UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
314 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
316 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
317 UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
320 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
322 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
323 UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
326 US_SC_DEVICE, US_PR_DEVICE, NULL,
327 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
329 /* Reported by Paul Stewart <stewart@wetlogic.net>
330 * This entry is needed because the device reports Sub=ff */
331 UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
333 "DVD-CAM DZ-MV100A Camcorder",
334 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
337 * Reported by Manuel Fombuena <mfombuena@ya.com> and
338 * Frank Copeland <fjc@thingy.apana.org.au> */
339 UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
340 "Tekom Technologies, Inc",
342 US_SC_DEVICE, US_PR_DEVICE, NULL,
343 US_FL_IGNORE_RESIDUE ),
345 /* Patch for Nikon coolpix 2000
346 * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
347 UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
350 US_SC_DEVICE, US_PR_DEVICE,NULL,
351 US_FL_NOT_LOCKABLE ),
353 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
354 UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
357 US_SC_DEVICE, US_PR_CB, NULL,
358 US_FL_MAX_SECTORS_MIN),
360 /* Reported by Simon Levitt <simon@whattf.com>
361 * This entry needs Sub and Proto fields */
362 UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
365 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
367 /* Reported by Khalid Aziz <khalid@gonehiking.org>
368 * This entry is needed because the device reports Sub=ff */
369 UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
372 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
374 /* Not sure who reported this originally but
375 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
377 UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
380 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
382 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
383 * The device needs the flags only.
385 UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
388 US_SC_DEVICE, US_PR_DEVICE, NULL,
391 /* Reported by Kriston Fincher <kriston@airmail.net>
392 * Patch submitted by Sean Millichamp <sean@bruenor.org>
393 * This is to support the Panasonic PalmCam PV-SD4090
394 * This entry is needed because the device reports Sub=ff
396 UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
399 US_SC_UFI, US_PR_DEVICE, NULL, 0),
401 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
402 * This is needed for CB instead of CBI */
403 UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
406 US_SC_8070, US_PR_CB, NULL, 0),
408 /* Reported by Adriaan Penning <a.penning@luon.net> */
409 UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
412 US_SC_DEVICE, US_PR_DEVICE, NULL,
413 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
415 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
416 UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
419 US_SC_DEVICE, US_PR_DEVICE, NULL,
420 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
422 /* Most of the following entries were developed with the help of
423 * Shuttle/SCM directly.
425 UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
428 US_SC_8020, US_PR_CB, NULL, 0),
430 UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
433 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
434 US_FL_SCM_MULT_TARG ),
437 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
439 "eUSB CompactFlash Adapter",
440 US_SC_SCSI, US_PR_CB, NULL,
444 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
445 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
446 "SCM Microsystems Inc.",
448 US_SC_SCSI, US_PR_CB, NULL,
451 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
452 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
455 US_SC_SCSI, US_PR_DEVICE, NULL,
458 UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
461 US_SC_SCSI, US_PR_CB, NULL,
464 UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
466 "eUSB ATA/ATAPI Adapter",
467 US_SC_8020, US_PR_CB, NULL, 0),
469 UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
471 "eUSB CompactFlash Adapter",
472 US_SC_8020, US_PR_CB, NULL, 0),
474 UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
477 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
478 US_FL_SCM_MULT_TARG ),
480 UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
483 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
484 US_FL_SCM_MULT_TARG ),
486 UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
489 US_SC_8020, US_PR_CB, NULL, 0),
491 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
492 UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
495 US_SC_DEVICE, US_PR_DEVICE, NULL,
496 US_FL_MAX_SECTORS_64),
498 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
499 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
500 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
502 UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
505 US_SC_DEVICE, US_PR_DEVICE, NULL,
508 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
509 UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
512 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
513 US_FL_SCM_MULT_TARG ),
515 /* Iomega Clik! Drive
516 * Reported by David Chatenay <dchatenay@hotmail.com>
517 * The reason this is needed is not fully known.
519 UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
522 US_SC_8070, US_PR_DEVICE, NULL,
525 /* Added by Alan Stern <stern@rowland.harvard.edu> */
526 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
528 "File-backed Storage Gadget",
529 US_SC_DEVICE, US_PR_DEVICE, NULL,
532 /* Yakumo Mega Image 37
533 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
534 UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
535 "Tekom Technologies, Inc",
537 US_SC_DEVICE, US_PR_DEVICE, NULL,
538 US_FL_IGNORE_RESIDUE ),
540 /* Another Yakumo camera.
541 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
542 UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
543 "Tekom Technologies, Inc",
545 US_SC_DEVICE, US_PR_DEVICE, NULL,
546 US_FL_IGNORE_RESIDUE ),
548 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
549 UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
550 "Tekom Technologies, Inc",
552 US_SC_DEVICE, US_PR_DEVICE, NULL,
553 US_FL_IGNORE_RESIDUE ),
555 /* Yakumo Mega Image 47
556 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
557 UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
558 "Tekom Technologies, Inc",
560 US_SC_DEVICE, US_PR_DEVICE, NULL,
561 US_FL_IGNORE_RESIDUE ),
563 /* Reported by Paul Ortyl <ortylp@3miasto.net>
564 * Note that it's similar to the device above, only different prodID */
565 UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
566 "Tekom Technologies, Inc",
568 US_SC_DEVICE, US_PR_DEVICE, NULL,
569 US_FL_IGNORE_RESIDUE ),
571 UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
573 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
574 US_SC_SCSI, US_PR_DEVICE, NULL,
575 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
577 /* Submitted by Lars Jacob <jacob.lars@googlemail.com>
578 * This entry is needed because the device reports Sub=ff */
579 UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
582 US_SC_8070, US_PR_DEVICE, NULL,
586 /* Reported by wim@geeks.nl */
587 UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
589 "Memorystick NW-MS7",
590 US_SC_DEVICE, US_PR_DEVICE, NULL,
593 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
594 UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
597 US_SC_DEVICE, US_PR_DEVICE, NULL,
600 UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
602 "Memorystick MSAC-US1",
603 US_SC_DEVICE, US_PR_DEVICE, NULL,
606 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
607 UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
610 US_SC_SCSI, US_PR_DEVICE, NULL,
613 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
614 UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
617 US_SC_UFI, US_PR_DEVICE, NULL,
620 UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
622 "Memorystick MSC-U01N",
623 US_SC_DEVICE, US_PR_DEVICE, NULL,
626 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
627 UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
629 "PEG N760c Memorystick",
630 US_SC_DEVICE, US_PR_DEVICE, NULL,
633 UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
635 "Memorystick MSC-U03",
636 US_SC_UFI, US_PR_CB, NULL,
639 /* Submitted by Nathan Babb <nathan@lexi.com> */
640 UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
643 US_SC_DEVICE, US_PR_DEVICE, NULL,
646 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
647 UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
650 US_SC_DEVICE, US_PR_DEVICE, NULL,
653 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
654 UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
657 US_SC_DEVICE, US_PR_DEVICE, NULL,
660 /* floppy reports multiple luns */
661 UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
664 US_SC_DEVICE, US_PR_DEVICE, NULL,
668 UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
671 US_SC_DEVICE, US_PR_CB, NULL,
674 UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
677 US_SC_DEVICE, US_PR_DEVICE, NULL,
680 /* Reported by Johann Cardon <johann.cardon@free.fr>
681 * This entry is needed only because the device reports
682 * bInterfaceClass = 0xff (vendor-specific)
684 UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
687 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
689 /* Reported by RTE <raszilki@yandex.ru> */
690 UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
693 US_SC_DEVICE, US_PR_DEVICE, NULL,
694 US_FL_MAX_SECTORS_64 ),
696 /* Fabrizio Fellini <fello@libero.it> */
697 UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
699 "Digital Camera EX-20 DSC",
700 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
702 /* Reported by Andre Welter <a.r.welter@gmx.de>
703 * This antique device predates the release of the Bulk-only Transport
704 * spec, and if it gets a Get-Max-LUN then it requires the host to do a
705 * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
706 * us from sending the request.
708 UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
711 US_SC_DEVICE, US_PR_DEVICE, NULL,
714 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
715 UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
718 US_SC_DEVICE, US_PR_DEVICE, NULL,
721 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
722 * Some versions of this device need the SubClass and Protocol overrides
723 * while others don't.
725 UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
727 "PyroGate External CD-ROM Enclosure (FCD-523)",
728 US_SC_SCSI, US_PR_BULK, NULL,
729 US_FL_NEED_OVERRIDE ),
731 /* Submitted by Sven Anderson <sven-linux@anderson.de>
732 * There are at least four ProductIDs used for iPods, so I added 0x1202 and
733 * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
734 * to change with firmware updates, I changed the range to maximum for all
737 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
740 US_SC_DEVICE, US_PR_DEVICE, NULL,
741 US_FL_FIX_CAPACITY ),
743 /* Reported by Avi Kivity <avi@argo.co.il> */
744 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
747 US_SC_DEVICE, US_PR_DEVICE, NULL,
748 US_FL_FIX_CAPACITY ),
750 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
753 US_SC_DEVICE, US_PR_DEVICE, NULL,
754 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
756 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
759 US_SC_DEVICE, US_PR_DEVICE, NULL,
760 US_FL_FIX_CAPACITY ),
763 * Reported by Tyson Vinson <lornoss@gmail.com>
764 * This particular productId is the iPod Nano
766 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
769 US_SC_DEVICE, US_PR_DEVICE, NULL,
770 US_FL_FIX_CAPACITY ),
772 /* Reported by Dan Williams <dcbw@redhat.com>
773 * Option N.V. mobile broadband modems
774 * Ignore driver CD mode and force into modem mode by default.
777 /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
778 UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
781 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
784 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
785 UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
788 US_SC_DEVICE, US_PR_DEVICE, NULL,
791 /* The following two entries are for a Genesys USB to IDE
792 * converter chip, but it changes its ProductId depending
793 * on whether or not a disk or an optical device is enclosed
794 * They were originally reported by Alexander Oltu
795 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
798 * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
799 * <phil@ipom.com> as these flags were made and hard-coded
800 * special-cases were pulled from scsiglue.c.
802 UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
804 "USB to IDE Optical",
805 US_SC_DEVICE, US_PR_DEVICE, NULL,
806 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
808 UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
811 US_SC_DEVICE, US_PR_DEVICE, NULL,
812 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
814 /* Reported by Ben Efros <ben@pc-doctor.com> */
815 UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
818 US_SC_DEVICE, US_PR_DEVICE, NULL,
821 /* Reported by Hanno Boeck <hanno@gmx.de>
822 * Taken from the Lycoris Kernel */
823 UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
826 US_SC_SCSI, US_PR_BULK, NULL,
829 UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
832 US_SC_UFI, US_PR_CB, NULL, 0 ),
834 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
835 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
837 "USBMSC Audio Player",
838 US_SC_DEVICE, US_PR_DEVICE, NULL,
839 US_FL_FIX_CAPACITY ),
841 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
842 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
843 * Thomas Bartosik <tbartdev@gmx-topmail.de> */
844 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
845 "Prolific Technology Inc.",
846 "Mass Storage Device",
847 US_SC_DEVICE, US_PR_DEVICE, NULL,
848 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
850 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
851 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
852 "Prolific Technology Inc.",
853 "ATAPI-6 Bridge Controller",
854 US_SC_DEVICE, US_PR_DEVICE, NULL,
855 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
857 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
858 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
861 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
863 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
864 UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
867 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
869 UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
872 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
874 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */
875 UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
876 "Thomson Multimedia Inc.",
877 "RCA RD1080 MP3 Player",
878 US_SC_DEVICE, US_PR_DEVICE, NULL,
879 US_FL_FIX_CAPACITY ),
881 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
882 UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
885 US_SC_DEVICE, US_PR_DEVICE, NULL,
886 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
888 /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
889 * Support the following product :
890 * "Dane-Elec MediaTouch"
892 UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
895 US_SC_DEVICE, US_PR_DEVICE, NULL,
896 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
898 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
899 * This USB MP3/AVI player device fails and disconnects if more than 128
900 * sectors (64kB) are read/written in a single command, and may be present
901 * at least in the following products:
902 * "Magnex Digital Video Panel DVP 1800"
903 * "MP4 AIGO 4GB SLOT SD"
904 * "Teclast TL-C260 MP3"
905 * "i.Meizu PMP MP3/MP4"
906 * "Speed MV8 MP4 Audio Player"
908 UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
911 US_SC_DEVICE, US_PR_DEVICE, NULL,
912 US_FL_MAX_SECTORS_64),
914 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
915 UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
918 US_SC_DEVICE, US_PR_DEVICE, NULL,
919 US_FL_IGNORE_RESIDUE),
921 /* Submitted by Roman Hodek <roman@hodek.net> */
922 UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
924 "ImageMate SDDR-05a",
925 US_SC_SCSI, US_PR_CB, NULL,
928 UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
929 "SanDisk Corporation",
930 "ImageMate CompactFlash USB",
931 US_SC_DEVICE, US_PR_DEVICE, NULL,
932 US_FL_FIX_CAPACITY ),
934 UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
937 US_SC_SCSI, US_PR_CB, NULL,
940 /* Reported by Eero Volotinen <eero@ping-viini.org> */
941 UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
942 "Freecom Technologies",
944 US_SC_DEVICE, US_PR_DEVICE, NULL,
947 UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
950 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
951 US_FL_SCM_MULT_TARG ),
953 UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
956 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
957 US_FL_SCM_MULT_TARG ),
960 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
963 US_SC_SCSI, US_PR_CB, NULL,
967 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
968 * Only revision 1.13 tested (same for all of the above devices,
969 * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
970 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
971 * See also http://martin.wilck.bei.t-online.de/#kecf .
973 UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
976 US_SC_DEVICE, US_PR_DEVICE, NULL,
977 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
979 /* Reported by Rauch Wolke <rauchwolke@gmx.net>
980 * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
982 UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
983 "Simple Tech/Datafab",
985 US_SC_DEVICE, US_PR_DEVICE, NULL,
986 US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
988 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
989 * to the USB storage specification in two ways:
990 * - They tell us they are using transport protocol CBI. In reality they
991 * are using transport protocol CB.
992 * - They don't like the INQUIRY command. So we must handle this command
993 * of the SCSI layer ourselves.
994 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
995 * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
996 * So don't remove the US_PR_CB override!
997 * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
999 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
1002 US_SC_8070, US_PR_CB, NULL,
1003 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
1005 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
1006 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
1009 US_SC_DEVICE, US_PR_DEVICE, NULL,
1012 /* Reported by Luciano Rocha <luciano@eurotux.com> */
1013 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
1016 US_SC_DEVICE, US_PR_DEVICE, NULL,
1017 US_FL_FIX_CAPACITY),
1019 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
1020 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
1023 US_SC_DEVICE, US_PR_DEVICE, NULL,
1024 US_FL_FIX_CAPACITY),
1026 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
1027 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
1030 US_SC_DEVICE, US_PR_DEVICE, NULL,
1031 US_FL_FIX_CAPACITY),
1033 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
1034 * Flag will support Bulk devices which use a standards-violating 32-byte
1035 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
1036 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
1039 UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
1042 US_SC_DEVICE, US_PR_DEVICE, NULL,
1045 /* Andrew Lunn <andrew@lunn.ch>
1046 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
1048 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
1050 UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
1053 US_SC_DEVICE, US_PR_DEVICE, NULL,
1054 US_FL_NOT_LOCKABLE),
1056 /* Submitted by Jan De Luyck <lkml@kcore.org> */
1057 UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
1060 US_SC_DEVICE, US_PR_DEVICE, NULL,
1063 /* Submitted by Dylan Taft <d13f00l@gmail.com>
1064 * US_FL_IGNORE_RESIDUE Needed
1066 UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
1068 "Aiptek USB Keychain MP3 Player",
1069 US_SC_DEVICE, US_PR_DEVICE, NULL,
1070 US_FL_IGNORE_RESIDUE),
1072 /* Entry needed for flags. Moreover, all devices with this ID use
1073 * bulk-only transport, but _some_ falsely report Control/Bulk instead.
1074 * One example is "Trumpion Digital Research MYMP3".
1075 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
1077 UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
1079 "t33520 USB Flash Card Controller",
1080 US_SC_DEVICE, US_PR_BULK, NULL,
1081 US_FL_NEED_OVERRIDE ),
1083 /* Reported by Filippo Bardelli <filibard@libero.it>
1084 * The device reports a subclass of RBC, which is wrong.
1086 UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
1087 "Trumpion Microelectronics, Inc.",
1088 "33520 USB Digital Voice Recorder",
1089 US_SC_UFI, US_PR_DEVICE, NULL,
1092 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
1093 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
1096 US_SC_RBC, US_PR_BULK, NULL,
1100 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
1102 "5-in-1 Card Reader",
1103 US_SC_DEVICE, US_PR_DEVICE, NULL,
1104 US_FL_FIX_CAPACITY ),
1106 /* This Pentax still camera is not conformant
1107 * to the USB storage specification: -
1108 * - It does not like the INQUIRY command. So we must handle this command
1109 * of the SCSI layer ourselves.
1110 * Tested on Rev. 10.00 (0x1000)
1111 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
1113 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
1116 US_SC_DEVICE, US_PR_DEVICE, NULL,
1117 US_FL_FIX_INQUIRY ),
1119 /* These are virtual windows driver CDs, which the zd1211rw driver
1120 * automatically converts into WLAN devices. */
1121 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
1123 "G-220F USB-WLAN Install",
1124 US_SC_DEVICE, US_PR_DEVICE, NULL,
1125 US_FL_IGNORE_DEVICE ),
1127 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
1129 "WL-117 USB-WLAN Install",
1130 US_SC_DEVICE, US_PR_DEVICE, NULL,
1131 US_FL_IGNORE_DEVICE ),
1133 /* Reported by Dan Williams <dcbw@redhat.com>
1134 * Option N.V. mobile broadband modems
1135 * Ignore driver CD mode and force into modem mode by default.
1139 UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
1142 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
1145 /* Reported by F. Aben <f.aben@option.com>
1146 * This device (wrongly) has a vendor-specific device descriptor.
1147 * The entry is needed so usb-storage can bind to it's mass-storage
1148 * interface as an interface driver */
1149 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
1152 US_SC_DEVICE, US_PR_DEVICE, NULL,
1155 /* Reported by Jan Dumon <j.dumon@option.com>
1156 * This device (wrongly) has a vendor-specific device descriptor.
1157 * The entry is needed so usb-storage can bind to it's mass-storage
1158 * interface as an interface driver */
1159 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
1162 US_SC_DEVICE, US_PR_DEVICE, NULL,
1165 /* Reported by Ben Efros <ben@pc-doctor.com> */
1166 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
1169 US_SC_DEVICE, US_PR_DEVICE, NULL,
1172 UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
1175 US_SC_DEVICE, US_PR_DEVICE, NULL,
1179 * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
1180 * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
1182 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
1185 US_SC_DEVICE, US_PR_DEVICE, NULL,
1188 /* Submitted by Joris Struyve <joris@struyve.be> */
1189 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
1192 US_SC_DEVICE, US_PR_DEVICE, NULL,
1196 * Entry for Jenoptik JD 5200z3
1198 * email: car.busse@gmx.de
1200 UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
1203 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
1205 /* Reported by Jason Johnston <killean@shaw.ca> */
1206 UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
1207 "Macpower Technology Co.LTD.",
1208 "USB 2.0 3.5\" DEVICE",
1209 US_SC_DEVICE, US_PR_DEVICE, NULL,
1210 US_FL_FIX_CAPACITY),
1212 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
1213 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
1214 * works for me. Can anybody correct these values? (I able to test corrected
1217 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
1220 US_SC_DEVICE, US_PR_DEVICE, NULL,
1221 US_FL_FIX_INQUIRY ),
1223 /* Reported by Edward Chapman (taken from linux-usb mailing list)
1224 Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
1225 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
1228 US_SC_DEVICE, US_PR_DEVICE, NULL,
1229 US_FL_IGNORE_RESIDUE ),
1232 /* Patch by Stephan Walter <stephan.walter@epfl.ch>
1233 * I don't know why, but it works... */
1234 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
1237 US_SC_DEVICE, US_PR_DEVICE, NULL,
1238 US_FL_IGNORE_RESIDUE ),
1240 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */
1241 UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
1244 US_SC_DEVICE, US_PR_DEVICE, NULL,
1245 US_FL_IGNORE_RESIDUE ),
1247 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
1248 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
1251 US_SC_DEVICE, US_PR_BULK, NULL,
1252 US_FL_NEED_OVERRIDE ),
1254 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
1255 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
1258 US_SC_DEVICE, US_PR_DEVICE, NULL,
1259 US_FL_FIX_INQUIRY ),
1261 /* Submitted by Daniel Drake <dsd@gentoo.org>
1262 * Reported by dayul on the Gentoo Forums */
1263 UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
1266 US_SC_DEVICE, US_PR_DEVICE, NULL,
1267 US_FL_IGNORE_RESIDUE ),
1269 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
1270 UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
1273 US_SC_DEVICE, US_PR_DEVICE, NULL,
1274 US_FL_IGNORE_RESIDUE ),
1276 /* Reported by Benjamin Schiller <sbenni@gmx.de>
1277 * It is also sold by Easylite as DJ 20 */
1278 UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
1281 US_SC_DEVICE, US_PR_DEVICE, NULL,
1282 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
1284 /* Patch by Leonid Petrov mail at lpetrov.net
1285 * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
1286 * http://www.qbik.ch/usb/devices/showdev.php?id=1705
1287 * Updated to 103 device by MJ Ray mjr at phonecoop.coop
1289 UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
1292 US_SC_DEVICE, US_PR_DEVICE, NULL,
1293 US_FL_IGNORE_RESIDUE ),
1295 /* David Kuehling <dvdkhlng@gmx.de>:
1296 * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
1297 * errors when trying to write.
1299 UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
1302 US_SC_DEVICE, US_PR_DEVICE, NULL,
1303 US_FL_IGNORE_RESIDUE ),
1305 /* Jeremy Katz <katzj@redhat.com>:
1306 * The Blackberry Pearl can run in two modes; a usb-storage only mode
1307 * and a mode that allows access via mass storage and to its database.
1308 * The berry_charge module will set the device to dual mode and thus we
1309 * should ignore its native mode if that module is built
1311 #ifdef CONFIG_USB_BERRY_CHARGE
1312 UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001,
1315 US_SC_DEVICE, US_PR_DEVICE, NULL,
1316 US_FL_IGNORE_DEVICE ),
1319 /* Reported by Michael Stattmann <michael@stattmann.com> */
1320 UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
1322 "V800-Vodafone 802",
1323 US_SC_DEVICE, US_PR_DEVICE, NULL,
1324 US_FL_NO_WP_DETECT ),
1326 /* Reported by The Solutor <thesolutor@gmail.com> */
1327 UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
1330 US_SC_DEVICE, US_PR_DEVICE, NULL,
1331 US_FL_IGNORE_DEVICE),
1333 /* Reported by Jan Mate <mate@fiit.stuba.sk>
1334 * and by Soeren Sonnenburg <kernel@nn7.de> */
1335 UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
1338 US_SC_DEVICE, US_PR_DEVICE, NULL,
1339 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1341 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
1342 UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
1345 US_SC_DEVICE, US_PR_DEVICE, NULL,
1346 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
1348 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */
1349 UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
1352 US_SC_DEVICE, US_PR_DEVICE, NULL,
1353 US_FL_IGNORE_RESIDUE ),
1355 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
1356 * Tested on hardware version 1.10.
1357 * Entry is needed only for the initializer function override.
1358 * Devices with bcd > 110 seem to not need it while those
1359 * with bcd < 110 appear to need it.
1361 UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
1364 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
1367 UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
1370 US_SC_DEVICE, US_PR_DEVICE, NULL,
1373 /* Reported by Fabio Venturi <f.venturi@tdnet.it>
1374 * The device reports a vendor-specific bDeviceClass.
1376 UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
1377 "Actions Semiconductor",
1379 US_SC_DEVICE, US_PR_DEVICE, NULL,
1382 /* Reported by Pascal Terjan <pterjan@mandriva.com>
1383 * Ignore driver CD mode and force into modem mode by default.
1385 UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
1388 US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
1390 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
1391 * Entry is needed for the initializer function override,
1392 * which instructs the device to load as a modem
1395 UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
1398 US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
1401 /* Reported by Jaco Kroon <jaco@kroon.co.za>
1402 * The usb-storage module found on the Digitech GNX4 (and supposedly other
1403 * devices) misbehaves and causes a bunch of invalid I/O errors.
1405 UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
1407 "DigiTech Mass Storage",
1408 US_SC_DEVICE, US_PR_DEVICE, NULL,
1409 US_FL_IGNORE_RESIDUE ),
1411 /* Reported by fangxiaozhi <huananhu@huawei.com>
1412 * This brings the HUAWEI data card devices into multi-port mode
1414 UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
1417 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1419 UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
1422 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1424 UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
1427 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1429 UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
1432 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1434 UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
1437 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1439 UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
1442 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1444 UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
1447 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1449 UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
1452 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1454 UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
1457 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1459 UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
1462 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1464 UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
1467 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1469 UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
1472 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1474 UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
1477 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1479 UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
1482 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1484 UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
1487 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1489 UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
1492 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1494 UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
1497 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1499 UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
1502 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1504 UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
1507 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1509 UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
1512 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1514 UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
1517 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1519 UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
1522 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1524 UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
1527 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1529 UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
1532 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1534 UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
1537 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1539 UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
1542 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1544 UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
1547 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1549 UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
1552 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1554 UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
1557 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1559 UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
1562 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1564 UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
1567 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1569 UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
1572 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1574 UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
1577 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1579 UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
1582 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1584 UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
1587 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1589 UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
1592 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1594 UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
1597 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1599 UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
1602 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1604 UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
1607 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1609 UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
1612 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1614 UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
1617 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1619 UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
1622 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1624 UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
1627 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1629 UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
1632 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1634 UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
1637 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1639 UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
1642 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1644 UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
1647 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1649 UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
1652 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1654 UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
1657 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1659 UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
1662 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1664 UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
1667 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1669 UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
1672 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1674 UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
1677 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1679 UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
1682 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1684 UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
1687 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1689 UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
1692 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1694 UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
1697 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1699 UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
1702 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1704 UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
1707 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1709 UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
1712 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1714 UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
1717 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1719 UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
1722 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1724 UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
1727 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1729 UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
1732 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1734 UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
1737 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1739 UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
1742 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1745 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
1746 UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
1749 US_SC_DEVICE, US_PR_DEVICE, NULL,
1752 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
1753 UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
1756 US_SC_DEVICE, US_PR_DEVICE, NULL,
1757 US_FL_IGNORE_RESIDUE ),
1759 /* Reported by Francesco Foresti <frafore@tiscali.it> */
1760 UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
1763 US_SC_DEVICE, US_PR_DEVICE, NULL,
1764 US_FL_IGNORE_RESIDUE ),
1766 /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
1767 * JMicron responds to USN and several other SCSI ioctls with a
1768 * residue that causes subsequent I/O requests to fail. */
1769 UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
1771 "USB to ATA/ATAPI Bridge",
1772 US_SC_DEVICE, US_PR_DEVICE, NULL,
1773 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
1775 /* Reported by Robert Schedel <r.schedel@yahoo.de>
1776 * Note: this is a 'super top' device like the above 14cd/6600 device */
1777 UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
1780 US_SC_DEVICE, US_PR_DEVICE, NULL,
1781 US_FL_IGNORE_RESIDUE ),
1783 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
1786 US_SC_DEVICE, US_PR_DEVICE, NULL,
1787 US_FL_FIX_CAPACITY),
1789 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
1790 * and Renato Perini <rperini@email.it>
1792 UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
1795 US_SC_DEVICE, US_PR_DEVICE, NULL,
1796 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1799 * Patch by Constantin Baranov <const@tltsu.ru>
1800 * Report by Andreas Koenecke.
1803 UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
1806 US_SC_DEVICE, US_PR_DEVICE, NULL,
1807 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
1809 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
1810 UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
1813 US_SC_DEVICE, US_PR_DEVICE, NULL,
1816 /* Reported by Rohan Hart <rohan.hart17@gmail.com> */
1817 UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
1820 US_SC_DEVICE, US_PR_DEVICE, NULL,
1821 US_FL_FIX_CAPACITY ),
1823 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
1826 UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
1828 "Mio DigiWalker USB Sync",
1829 US_SC_DEVICE,US_PR_DEVICE,NULL,
1830 US_FL_MAX_SECTORS_64 ),
1832 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
1833 UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
1836 US_SC_DEVICE, US_PR_DEVICE, NULL,
1837 US_FL_IGNORE_RESIDUE ),
1840 * David Härdeman <david@2gen.com>
1841 * The key makes the SCSI stack print confusing (but harmless) messages
1843 UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
1846 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1848 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
1849 UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
1852 US_SC_DEVICE, US_PR_DEVICE, NULL,
1853 US_FL_CAPACITY_HEURISTICS),
1855 /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
1856 UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
1858 "Digital MP3 Audio Player",
1859 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1861 /* Control/Bulk transport for all SubClass values */
1862 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
1863 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
1864 USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
1865 USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
1866 USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
1867 USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
1869 /* Control/Bulk/Interrupt transport for all SubClass values */
1870 USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
1871 USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
1872 USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
1873 USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
1874 USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
1875 USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
1877 /* Bulk-only transport for all SubClass values */
1878 USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
1879 USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
1880 USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
1881 USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
1882 USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
1883 USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),