drivers/video/fbdev/da8xx-fb.c

   1 /*
   2  * Copyright (C) 2008-2009 MontaVista Software Inc.
   3  * Copyright (C) 2008-2009 Texas Instruments Inc
   4  *
   5  * Based on the LCD driver for TI Avalanche processors written by
   6  * Ajay Singh and Shalom Hai.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option)any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  21  */
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/fb.h>
  25 #include <linux/dma-mapping.h>
  26 #include <linux/device.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/uaccess.h>
  29 #include <linux/pm_runtime.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/wait.h>
  32 #include <linux/clk.h>
  33 #include <linux/cpufreq.h>
  34 #include <linux/console.h>
  35 #include <linux/spinlock.h>
  36 #include <linux/slab.h>
  37 #include <linux/delay.h>
  38 #include <linux/lcm.h>
  39 #include <video/da8xx-fb.h>
  40 #include <asm/div64.h>
  41
  42 #define DRIVER_NAME "da8xx_lcdc"
  43
  44 #define LCD_VERSION_1   1
  45 #define LCD_VERSION_2   2
  46
  47 /* LCD Status Register */
  48 #define LCD_END_OF_FRAME1               BIT(9)
  49 #define LCD_END_OF_FRAME0               BIT(8)
  50 #define LCD_PL_LOAD_DONE                BIT(6)
  51 #define LCD_FIFO_UNDERFLOW              BIT(5)
  52 #define LCD_SYNC_LOST                   BIT(2)
  53 #define LCD_FRAME_DONE                  BIT(0)
  54
  55 /* LCD DMA Control Register */
  56 #define LCD_DMA_BURST_SIZE(x)           ((x) << 4)
  57 #define LCD_DMA_BURST_1                 0x0
  58 #define LCD_DMA_BURST_2                 0x1
  59 #define LCD_DMA_BURST_4                 0x2
  60 #define LCD_DMA_BURST_8                 0x3
  61 #define LCD_DMA_BURST_16                0x4
  62 #define LCD_V1_END_OF_FRAME_INT_ENA     BIT(2)
  63 #define LCD_V2_END_OF_FRAME0_INT_ENA    BIT(8)
  64 #define LCD_V2_END_OF_FRAME1_INT_ENA    BIT(9)
  65 #define LCD_DUAL_FRAME_BUFFER_ENABLE    BIT(0)
  66
  67 /* LCD Control Register */
  68 #define LCD_CLK_DIVISOR(x)              ((x) << 8)
  69 #define LCD_RASTER_MODE                 0x01
  70
  71 /* LCD Raster Control Register */
  72 #define LCD_PALETTE_LOAD_MODE(x)        ((x) << 20)
  73 #define PALETTE_AND_DATA                0x00
  74 #define PALETTE_ONLY                    0x01
  75 #define DATA_ONLY                       0x02
  76
  77 #define LCD_MONO_8BIT_MODE              BIT(9)
  78 #define LCD_RASTER_ORDER                BIT(8)
  79 #define LCD_TFT_MODE                    BIT(7)
  80 #define LCD_V1_UNDERFLOW_INT_ENA        BIT(6)
  81 #define LCD_V2_UNDERFLOW_INT_ENA        BIT(5)
  82 #define LCD_V1_PL_INT_ENA               BIT(4)
  83 #define LCD_V2_PL_INT_ENA               BIT(6)
  84 #define LCD_MONOCHROME_MODE             BIT(1)
  85 #define LCD_RASTER_ENABLE               BIT(0)
  86 #define LCD_TFT_ALT_ENABLE              BIT(23)
  87 #define LCD_STN_565_ENABLE              BIT(24)
  88 #define LCD_V2_DMA_CLK_EN               BIT(2)
  89 #define LCD_V2_LIDD_CLK_EN              BIT(1)
  90 #define LCD_V2_CORE_CLK_EN              BIT(0)
  91 #define LCD_V2_LPP_B10                  26
  92 #define LCD_V2_TFT_24BPP_MODE           BIT(25)
  93 #define LCD_V2_TFT_24BPP_UNPACK         BIT(26)
  94
  95 /* LCD Raster Timing 2 Register */
  96 #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x)      ((x) << 16)
  97 #define LCD_AC_BIAS_FREQUENCY(x)                ((x) << 8)
  98 #define LCD_SYNC_CTRL                           BIT(25)
  99 #define LCD_SYNC_EDGE                           BIT(24)
 100 #define LCD_INVERT_PIXEL_CLOCK                  BIT(22)
 101 #define LCD_INVERT_LINE_CLOCK                   BIT(21)
 102 #define LCD_INVERT_FRAME_CLOCK                  BIT(20)
 103
 104 /* LCD Block */
 105 #define  LCD_PID_REG                            0x0
 106 #define  LCD_CTRL_REG                           0x4
 107 #define  LCD_STAT_REG                           0x8
 108 #define  LCD_RASTER_CTRL_REG                    0x28
 109 #define  LCD_RASTER_TIMING_0_REG                0x2C
 110 #define  LCD_RASTER_TIMING_1_REG                0x30
 111 #define  LCD_RASTER_TIMING_2_REG                0x34
 112 #define  LCD_DMA_CTRL_REG                       0x40
 113 #define  LCD_DMA_FRM_BUF_BASE_ADDR_0_REG        0x44
 114 #define  LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG     0x48
 115 #define  LCD_DMA_FRM_BUF_BASE_ADDR_1_REG        0x4C
 116 #define  LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG     0x50
 117
 118 /* Interrupt Registers available only in Version 2 */
 119 #define  LCD_RAW_STAT_REG                       0x58
 120 #define  LCD_MASKED_STAT_REG                    0x5c
 121 #define  LCD_INT_ENABLE_SET_REG                 0x60
 122 #define  LCD_INT_ENABLE_CLR_REG                 0x64
 123 #define  LCD_END_OF_INT_IND_REG                 0x68
 124
 125 /* Clock registers available only on Version 2 */
 126 #define  LCD_CLK_ENABLE_REG                     0x6c
 127 #define  LCD_CLK_RESET_REG                      0x70
 128 #define  LCD_CLK_MAIN_RESET                     BIT(3)
 129
 130 #define LCD_NUM_BUFFERS 2
 131
 132 #define PALETTE_SIZE    256
 133
 134 #define CLK_MIN_DIV     2
 135 #define CLK_MAX_DIV     255
 136
 137 static void __iomem *da8xx_fb_reg_base;
 138 static unsigned int lcd_revision;
 139 static irq_handler_t lcdc_irq_handler;
 140 static wait_queue_head_t frame_done_wq;
 141 static int frame_done_flag;
 142
 143 static unsigned int lcdc_read(unsigned int addr)
 144 {
 145         return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr));
 146 }
 147
 148 static void lcdc_write(unsigned int val, unsigned int addr)
 149 {
 150         __raw_writel(val, da8xx_fb_reg_base + (addr));
 151 }
 152
 153 struct da8xx_fb_par {
 154         struct device           *dev;
 155         resource_size_t p_palette_base;
 156         unsigned char *v_palette_base;
 157         dma_addr_t              vram_phys;
 158         unsigned long           vram_size;
 159         void                    *vram_virt;
 160         unsigned int            dma_start;
 161         unsigned int            dma_end;
 162         struct clk *lcdc_clk;
 163         int irq;
 164         unsigned int palette_sz;
 165         int blank;
 166         wait_queue_head_t       vsync_wait;
 167         int                     vsync_flag;
 168         int                     vsync_timeout;
 169         spinlock_t              lock_for_chan_update;
 170
 171         /*
 172          * LCDC has 2 ping pong DMA channels, channel 0
 173          * and channel 1.
 174          */
 175         unsigned int            which_dma_channel_done;
 176 #ifdef CONFIG_CPU_FREQ
 177         struct notifier_block   freq_transition;
 178 #endif
 179         unsigned int            lcdc_clk_rate;
 180         void (*panel_power_ctrl)(int);
 181         u32 pseudo_palette[16];
 182         struct fb_videomode     mode;
 183         struct lcd_ctrl_config  cfg;
 184 };
 185
 186 static struct fb_var_screeninfo da8xx_fb_var;
 187
 188 static struct fb_fix_screeninfo da8xx_fb_fix = {
 189         .id = "DA8xx FB Drv",
 190         .type = FB_TYPE_PACKED_PIXELS,
 191         .type_aux = 0,
 192         .visual = FB_VISUAL_PSEUDOCOLOR,
 193         .xpanstep = 0,
 194         .ypanstep = 1,
 195         .ywrapstep = 0,
 196         .accel = FB_ACCEL_NONE
 197 };
 198
 199 static struct fb_videomode known_lcd_panels[] = {
 200         /* Sharp LCD035Q3DG01 */
 201         [0] = {
 202                 .name           = "Sharp_LCD035Q3DG01",
 203                 .xres           = 320,
 204                 .yres           = 240,
 205                 .pixclock       = KHZ2PICOS(4607),
 206                 .left_margin    = 6,
 207                 .right_margin   = 8,
 208                 .upper_margin   = 2,
 209                 .lower_margin   = 2,
 210                 .hsync_len      = 0,
 211                 .vsync_len      = 0,
 212                 .sync           = FB_SYNC_CLK_INVERT |
 213                         FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 214         },
 215         /* Sharp LK043T1DG01 */
 216         [1] = {
 217                 .name           = "Sharp_LK043T1DG01",
 218                 .xres           = 480,
 219                 .yres           = 272,
 220                 .pixclock       = KHZ2PICOS(7833),
 221                 .left_margin    = 2,
 222                 .right_margin   = 2,
 223                 .upper_margin   = 2,
 224                 .lower_margin   = 2,
 225                 .hsync_len      = 41,
 226                 .vsync_len      = 10,
 227                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 228                 .flag           = 0,
 229         },
 230         [2] = {
 231                 /* Hitachi SP10Q010 */
 232                 .name           = "SP10Q010",
 233                 .xres           = 320,
 234                 .yres           = 240,
 235                 .pixclock       = KHZ2PICOS(7833),
 236                 .left_margin    = 10,
 237                 .right_margin   = 10,
 238                 .upper_margin   = 10,
 239                 .lower_margin   = 10,
 240                 .hsync_len      = 10,
 241                 .vsync_len      = 10,
 242                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 243                 .flag           = 0,
 244         },
 245 };
 246
 247 static bool da8xx_fb_is_raster_enabled(void)
 248 {
 249         return !!(lcdc_read(LCD_RASTER_CTRL_REG) & LCD_RASTER_ENABLE);
 250 }
 251
 252 /* Enable the Raster Engine of the LCD Controller */
 253 static void lcd_enable_raster(void)
 254 {
 255         u32 reg;
 256
 257         /* Put LCDC in reset for several cycles */
 258         if (lcd_revision == LCD_VERSION_2)
 259                 /* Write 1 to reset LCDC */
 260                 lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
 261         mdelay(1);
 262
 263         /* Bring LCDC out of reset */
 264         if (lcd_revision == LCD_VERSION_2)
 265                 lcdc_write(0, LCD_CLK_RESET_REG);
 266         mdelay(1);
 267
 268         /* Above reset sequence doesnot reset register context */
 269         reg = lcdc_read(LCD_RASTER_CTRL_REG);
 270         if (!(reg & LCD_RASTER_ENABLE))
 271                 lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
 272 }
 273
 274 /* Disable the Raster Engine of the LCD Controller */
 275 static void lcd_disable_raster(enum da8xx_frame_complete wait_for_frame_done)
 276 {
 277         u32 reg;
 278         int ret;
 279
 280         reg = lcdc_read(LCD_RASTER_CTRL_REG);
 281         if (reg & LCD_RASTER_ENABLE)
 282                 lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
 283         else
 284                 /* return if already disabled */
 285                 return;
 286
 287         if ((wait_for_frame_done == DA8XX_FRAME_WAIT) &&
 288                         (lcd_revision == LCD_VERSION_2)) {
 289                 frame_done_flag = 0;
 290                 ret = wait_event_interruptible_timeout(frame_done_wq,
 291                                 frame_done_flag != 0,
 292                                 msecs_to_jiffies(50));
 293                 if (ret == 0)
 294                         pr_err("LCD Controller timed out\n");
 295         }
 296 }
 297
 298 static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
 299 {
 300         u32 start;
 301         u32 end;
 302         u32 reg_ras;
 303         u32 reg_dma;
 304         u32 reg_int;
 305
 306         /* init reg to clear PLM (loading mode) fields */
 307         reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
 308         reg_ras &= ~(3 << 20);
 309
 310         reg_dma  = lcdc_read(LCD_DMA_CTRL_REG);
 311
 312         if (load_mode == LOAD_DATA) {
 313                 start    = par->dma_start;
 314                 end      = par->dma_end;
 315
 316                 reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
 317                 if (lcd_revision == LCD_VERSION_1) {
 318                         reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
 319                 } else {
 320                         reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
 321                                 LCD_V2_END_OF_FRAME0_INT_ENA |
 322                                 LCD_V2_END_OF_FRAME1_INT_ENA |
 323                                 LCD_FRAME_DONE | LCD_SYNC_LOST;
 324                         lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
 325                 }
 326                 reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
 327
 328                 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
 329                 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
 330                 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
 331                 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
 332         } else if (load_mode == LOAD_PALETTE) {
 333                 start    = par->p_palette_base;
 334                 end      = start + par->palette_sz - 1;
 335
 336                 reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
 337
 338                 if (lcd_revision == LCD_VERSION_1) {
 339                         reg_ras |= LCD_V1_PL_INT_ENA;
 340                 } else {
 341                         reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
 342                                 LCD_V2_PL_INT_ENA;
 343                         lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
 344                 }
 345
 346                 lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
 347                 lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
 348         }
 349
 350         lcdc_write(reg_dma, LCD_DMA_CTRL_REG);
 351         lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
 352
 353         /*
 354          * The Raster enable bit must be set after all other control fields are
 355          * set.
 356          */
 357         lcd_enable_raster();
 358 }
 359
 360 /* Configure the Burst Size and fifo threhold of DMA */
 361 static int lcd_cfg_dma(int burst_size, int fifo_th)
 362 {
 363         u32 reg;
 364
 365         reg = lcdc_read(LCD_DMA_CTRL_REG) & 0x00000001;
 366         switch (burst_size) {
 367         case 1:
 368                 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
 369                 break;
 370         case 2:
 371                 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
 372                 break;
 373         case 4:
 374                 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
 375                 break;
 376         case 8:
 377                 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
 378                 break;
 379         case 16:
 380         default:
 381                 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
 382                 break;
 383         }
 384
 385         reg |= (fifo_th << 8);
 386
 387         lcdc_write(reg, LCD_DMA_CTRL_REG);
 388
 389         return 0;
 390 }
 391
 392 static void lcd_cfg_ac_bias(int period, int transitions_per_int)
 393 {
 394         u32 reg;
 395
 396         /* Set the AC Bias Period and Number of Transisitons per Interrupt */
 397         reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000;
 398         reg |= LCD_AC_BIAS_FREQUENCY(period) |
 399                 LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
 400         lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
 401 }
 402
 403 static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
 404                 int front_porch)
 405 {
 406         u32 reg;
 407
 408         reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf;
 409         reg |= (((back_porch-1) & 0xff) << 24)
 410             | (((front_porch-1) & 0xff) << 16)
 411             | (((pulse_width-1) & 0x3f) << 10);
 412         lcdc_write(reg, LCD_RASTER_TIMING_0_REG);
 413
 414         /*
 415          * LCDC Version 2 adds some extra bits that increase the allowable
 416          * size of the horizontal timing registers.
 417          * remember that the registers use 0 to represent 1 so all values
 418          * that get set into register need to be decremented by 1
 419          */
 420         if (lcd_revision == LCD_VERSION_2) {
 421                 /* Mask off the bits we want to change */
 422                 reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & ~0x780000ff;
 423                 reg |= ((front_porch-1) & 0x300) >> 8;
 424                 reg |= ((back_porch-1) & 0x300) >> 4;
 425                 reg |= ((pulse_width-1) & 0x3c0) << 21;
 426                 lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
 427         }
 428 }
 429
 430 static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
 431                 int front_porch)
 432 {
 433         u32 reg;
 434
 435         reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff;
 436         reg |= ((back_porch & 0xff) << 24)
 437             | ((front_porch & 0xff) << 16)
 438             | (((pulse_width-1) & 0x3f) << 10);
 439         lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
 440 }
 441
 442 static int lcd_cfg_display(const struct lcd_ctrl_config *cfg,
 443                 struct fb_videomode *panel)
 444 {
 445         u32 reg;
 446         u32 reg_int;
 447
 448         reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE |
 449                                                 LCD_MONO_8BIT_MODE |
 450                                                 LCD_MONOCHROME_MODE);
 451
 452         switch (cfg->panel_shade) {
 453         case MONOCHROME:
 454                 reg |= LCD_MONOCHROME_MODE;
 455                 if (cfg->mono_8bit_mode)
 456                         reg |= LCD_MONO_8BIT_MODE;
 457                 break;
 458         case COLOR_ACTIVE:
 459                 reg |= LCD_TFT_MODE;
 460                 if (cfg->tft_alt_mode)
 461                         reg |= LCD_TFT_ALT_ENABLE;
 462                 break;
 463
 464         case COLOR_PASSIVE:
 465                 /* AC bias applicable only for Pasive panels */
 466                 lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
 467                 if (cfg->bpp == 12 && cfg->stn_565_mode)
 468                         reg |= LCD_STN_565_ENABLE;
 469                 break;
 470
 471         default:
 472                 return -EINVAL;
 473         }
 474
 475         /* enable additional interrupts here */
 476         if (lcd_revision == LCD_VERSION_1) {
 477                 reg |= LCD_V1_UNDERFLOW_INT_ENA;
 478         } else {
 479                 reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
 480                         LCD_V2_UNDERFLOW_INT_ENA;
 481                 lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
 482         }
 483
 484         lcdc_write(reg, LCD_RASTER_CTRL_REG);
 485
 486         reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
 487
 488         reg |= LCD_SYNC_CTRL;
 489
 490         if (cfg->sync_edge)
 491                 reg |= LCD_SYNC_EDGE;
 492         else
 493                 reg &= ~LCD_SYNC_EDGE;
 494
 495         if ((panel->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
 496                 reg |= LCD_INVERT_LINE_CLOCK;
 497         else
 498                 reg &= ~LCD_INVERT_LINE_CLOCK;
 499
 500         if ((panel->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
 501                 reg |= LCD_INVERT_FRAME_CLOCK;
 502         else
 503                 reg &= ~LCD_INVERT_FRAME_CLOCK;
 504
 505         lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
 506
 507         return 0;
 508 }
 509
 510 static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 511                 u32 bpp, u32 raster_order)
 512 {
 513         u32 reg;
 514
 515         if (bpp > 16 && lcd_revision == LCD_VERSION_1)
 516                 return -EINVAL;
 517
 518         /* Set the Panel Width */
 519         /* Pixels per line = (PPL + 1)*16 */
 520         if (lcd_revision == LCD_VERSION_1) {
 521                 /*
 522                  * 0x3F in bits 4..9 gives max horizontal resolution = 1024
 523                  * pixels.
 524                  */
 525                 width &= 0x3f0;
 526         } else {
 527                 /*
 528                  * 0x7F in bits 4..10 gives max horizontal resolution = 2048
 529                  * pixels.
 530                  */
 531                 width &= 0x7f0;
 532         }
 533
 534         reg = lcdc_read(LCD_RASTER_TIMING_0_REG);
 535         reg &= 0xfffffc00;
 536         if (lcd_revision == LCD_VERSION_1) {
 537                 reg |= ((width >> 4) - 1) << 4;
 538         } else {
 539                 width = (width >> 4) - 1;
 540                 reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
 541         }
 542         lcdc_write(reg, LCD_RASTER_TIMING_0_REG);
 543
 544         /* Set the Panel Height */
 545         /* Set bits 9:0 of Lines Per Pixel */
 546         reg = lcdc_read(LCD_RASTER_TIMING_1_REG);
 547         reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
 548         lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
 549
 550         /* Set bit 10 of Lines Per Pixel */
 551         if (lcd_revision == LCD_VERSION_2) {
 552                 reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
 553                 reg |= ((height - 1) & 0x400) << 16;
 554                 lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
 555         }
 556
 557         /* Set the Raster Order of the Frame Buffer */
 558         reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8);
 559         if (raster_order)
 560                 reg |= LCD_RASTER_ORDER;
 561
 562         par->palette_sz = 16 * 2;
 563
 564         switch (bpp) {
 565         case 1:
 566         case 2:
 567         case 4:
 568         case 16:
 569                 break;
 570         case 24:
 571                 reg |= LCD_V2_TFT_24BPP_MODE;
 572                 break;
 573         case 32:
 574                 reg |= LCD_V2_TFT_24BPP_MODE;
 575                 reg |= LCD_V2_TFT_24BPP_UNPACK;
 576                 break;
 577         case 8:
 578                 par->palette_sz = 256 * 2;
 579                 break;
 580
 581         default:
 582                 return -EINVAL;
 583         }
 584
 585         lcdc_write(reg, LCD_RASTER_CTRL_REG);
 586
 587         return 0;
 588 }
 589
 590 #define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
 591 static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 592                               unsigned blue, unsigned transp,
 593                               struct fb_info *info)
 594 {
 595         struct da8xx_fb_par *par = info->par;
 596         unsigned short *palette = (unsigned short *) par->v_palette_base;
 597         u_short pal;
 598         int update_hw = 0;
 599
 600         if (regno > 255)
 601                 return 1;
 602
 603         if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
 604                 return 1;
 605
 606         if (info->var.bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1)
 607                 return -EINVAL;
 608
 609         switch (info->fix.visual) {
 610         case FB_VISUAL_TRUECOLOR:
 611                 red = CNVT_TOHW(red, info->var.red.length);
 612                 green = CNVT_TOHW(green, info->var.green.length);
 613                 blue = CNVT_TOHW(blue, info->var.blue.length);
 614                 break;
 615         case FB_VISUAL_PSEUDOCOLOR:
 616                 switch (info->var.bits_per_pixel) {
 617                 case 4:
 618                         if (regno > 15)
 619                                 return -EINVAL;
 620
 621                         if (info->var.grayscale) {
 622                                 pal = regno;
 623                         } else {
 624                                 red >>= 4;
 625                                 green >>= 8;
 626                                 blue >>= 12;
 627
 628                                 pal = red & 0x0f00;
 629                                 pal |= green & 0x00f0;
 630                                 pal |= blue & 0x000f;
 631                         }
 632                         if (regno == 0)
 633                                 pal |= 0x2000;
 634                         palette[regno] = pal;
 635                         break;
 636
 637                 case 8:
 638                         red >>= 4;
 639                         green >>= 8;
 640                         blue >>= 12;
 641
 642                         pal = (red & 0x0f00);
 643                         pal |= (green & 0x00f0);
 644                         pal |= (blue & 0x000f);
 645
 646                         if (palette[regno] != pal) {
 647                                 update_hw = 1;
 648                                 palette[regno] = pal;
 649                         }
 650                         break;
 651                 }
 652                 break;
 653         }
 654
 655         /* Truecolor has hardware independent palette */
 656         if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
 657                 u32 v;
 658
 659                 if (regno > 15)
 660                         return -EINVAL;
 661
 662                 v = (red << info->var.red.offset) |
 663                         (green << info->var.green.offset) |
 664                         (blue << info->var.blue.offset);
 665
 666                 ((u32 *) (info->pseudo_palette))[regno] = v;
 667                 if (palette[0] != 0x4000) {
 668                         update_hw = 1;
 669                         palette[0] = 0x4000;
 670                 }
 671         }
 672
 673         /* Update the palette in the h/w as needed. */
 674         if (update_hw)
 675                 lcd_blit(LOAD_PALETTE, par);
 676
 677         return 0;
 678 }
 679 #undef CNVT_TOHW
 680
 681 static void da8xx_fb_lcd_reset(void)
 682 {
 683         /* DMA has to be disabled */
 684         lcdc_write(0, LCD_DMA_CTRL_REG);
 685         lcdc_write(0, LCD_RASTER_CTRL_REG);
 686
 687         if (lcd_revision == LCD_VERSION_2) {
 688                 lcdc_write(0, LCD_INT_ENABLE_SET_REG);
 689                 /* Write 1 to reset */
 690                 lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
 691                 lcdc_write(0, LCD_CLK_RESET_REG);
 692         }
 693 }
 694
 695 static int da8xx_fb_config_clk_divider(struct da8xx_fb_par *par,
 696                                               unsigned lcdc_clk_div,
 697                                               unsigned lcdc_clk_rate)
 698 {
 699         int ret;
 700
 701         if (par->lcdc_clk_rate != lcdc_clk_rate) {
 702                 ret = clk_set_rate(par->lcdc_clk, lcdc_clk_rate);
 703                 if (IS_ERR_VALUE(ret)) {
 704                         dev_err(par->dev,
 705                                 "unable to set clock rate at %u\n",
 706                                 lcdc_clk_rate);
 707                         return ret;
 708                 }
 709                 par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
 710         }
 711
 712         /* Configure the LCD clock divisor. */
 713         lcdc_write(LCD_CLK_DIVISOR(lcdc_clk_div) |
 714                         (LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
 715
 716         if (lcd_revision == LCD_VERSION_2)
 717                 lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
 718                                 LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
 719
 720         return 0;
 721 }
 722
 723 static unsigned int da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par,
 724                                               unsigned pixclock,
 725                                               unsigned *lcdc_clk_rate)
 726 {
 727         unsigned lcdc_clk_div;
 728
 729         pixclock = PICOS2KHZ(pixclock) * 1000;
 730
 731         *lcdc_clk_rate = par->lcdc_clk_rate;
 732
 733         if (pixclock < (*lcdc_clk_rate / CLK_MAX_DIV)) {
 734                 *lcdc_clk_rate = clk_round_rate(par->lcdc_clk,
 735                                                 pixclock * CLK_MAX_DIV);
 736                 lcdc_clk_div = CLK_MAX_DIV;
 737         } else if (pixclock > (*lcdc_clk_rate / CLK_MIN_DIV)) {
 738                 *lcdc_clk_rate = clk_round_rate(par->lcdc_clk,
 739                                                 pixclock * CLK_MIN_DIV);
 740                 lcdc_clk_div = CLK_MIN_DIV;
 741         } else {
 742                 lcdc_clk_div = *lcdc_clk_rate / pixclock;
 743         }
 744
 745         return lcdc_clk_div;
 746 }
 747
 748 static int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
 749                                             struct fb_videomode *mode)
 750 {
 751         unsigned lcdc_clk_rate;
 752         unsigned lcdc_clk_div = da8xx_fb_calc_clk_divider(par, mode->pixclock,
 753                                                           &lcdc_clk_rate);
 754
 755         return da8xx_fb_config_clk_divider(par, lcdc_clk_div, lcdc_clk_rate);
 756 }
 757
 758 static unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par,
 759                                           unsigned pixclock)
 760 {
 761         unsigned lcdc_clk_div, lcdc_clk_rate;
 762
 763         lcdc_clk_div = da8xx_fb_calc_clk_divider(par, pixclock, &lcdc_clk_rate);
 764         return KHZ2PICOS(lcdc_clk_rate / (1000 * lcdc_clk_div));
 765 }
 766
 767 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 768                 struct fb_videomode *panel)
 769 {
 770         u32 bpp;
 771         int ret = 0;
 772
 773         ret = da8xx_fb_calc_config_clk_divider(par, panel);
 774         if (IS_ERR_VALUE(ret)) {
 775                 dev_err(par->dev, "unable to configure clock\n");
 776                 return ret;
 777         }
 778
 779         if (panel->sync & FB_SYNC_CLK_INVERT)
 780                 lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) |
 781                         LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG);
 782         else
 783                 lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) &
 784                         ~LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG);
 785
 786         /* Configure the DMA burst size and fifo threshold. */
 787         ret = lcd_cfg_dma(cfg->dma_burst_sz, cfg->fifo_th);
 788         if (ret < 0)
 789                 return ret;
 790
 791         /* Configure the vertical and horizontal sync properties. */
 792         lcd_cfg_vertical_sync(panel->upper_margin, panel->vsync_len,
 793                         panel->lower_margin);
 794         lcd_cfg_horizontal_sync(panel->left_margin, panel->hsync_len,
 795                         panel->right_margin);
 796
 797         /* Configure for disply */
 798         ret = lcd_cfg_display(cfg, panel);
 799         if (ret < 0)
 800                 return ret;
 801
 802         bpp = cfg->bpp;
 803
 804         if (bpp == 12)
 805                 bpp = 16;
 806         ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres,
 807                                 (unsigned int)panel->yres, bpp,
 808                                 cfg->raster_order);
 809         if (ret < 0)
 810                 return ret;
 811
 812         /* Configure FDD */
 813         lcdc_write((lcdc_read(LCD_RASTER_CTRL_REG) & 0xfff00fff) |
 814                        (cfg->fdd << 12), LCD_RASTER_CTRL_REG);
 815
 816         return 0;
 817 }
 818
 819 /* IRQ handler for version 2 of LCDC */
 820 static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
 821 {
 822         struct da8xx_fb_par *par = arg;
 823         u32 stat = lcdc_read(LCD_MASKED_STAT_REG);
 824
 825         if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
 826                 lcd_disable_raster(DA8XX_FRAME_NOWAIT);
 827                 lcdc_write(stat, LCD_MASKED_STAT_REG);
 828                 lcd_enable_raster();
 829         } else if (stat & LCD_PL_LOAD_DONE) {
 830                 /*
 831                  * Must disable raster before changing state of any control bit.
 832                  * And also must be disabled before clearing the PL loading
 833                  * interrupt via the following write to the status register. If
 834                  * this is done after then one gets multiple PL done interrupts.
 835                  */
 836                 lcd_disable_raster(DA8XX_FRAME_NOWAIT);
 837
 838                 lcdc_write(stat, LCD_MASKED_STAT_REG);
 839
 840                 /* Disable PL completion interrupt */
 841                 lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG);
 842
 843                 /* Setup and start data loading mode */
 844                 lcd_blit(LOAD_DATA, par);
 845         } else {
 846                 lcdc_write(stat, LCD_MASKED_STAT_REG);
 847
 848                 if (stat & LCD_END_OF_FRAME0) {
 849                         par->which_dma_channel_done = 0;
 850                         lcdc_write(par->dma_start,
 851                                    LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
 852                         lcdc_write(par->dma_end,
 853                                    LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
 854                         par->vsync_flag = 1;
 855                         wake_up_interruptible(&par->vsync_wait);
 856                 }
 857
 858                 if (stat & LCD_END_OF_FRAME1) {
 859                         par->which_dma_channel_done = 1;
 860                         lcdc_write(par->dma_start,
 861                                    LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
 862                         lcdc_write(par->dma_end,
 863                                    LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
 864                         par->vsync_flag = 1;
 865                         wake_up_interruptible(&par->vsync_wait);
 866                 }
 867
 868                 /* Set only when controller is disabled and at the end of
 869                  * active frame
 870                  */
 871                 if (stat & BIT(0)) {
 872                         frame_done_flag = 1;
 873                         wake_up_interruptible(&frame_done_wq);
 874                 }
 875         }
 876
 877         lcdc_write(0, LCD_END_OF_INT_IND_REG);
 878         return IRQ_HANDLED;
 879 }
 880
 881 /* IRQ handler for version 1 LCDC */
 882 static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
 883 {
 884         struct da8xx_fb_par *par = arg;
 885         u32 stat = lcdc_read(LCD_STAT_REG);
 886         u32 reg_ras;
 887
 888         if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
 889                 lcd_disable_raster(DA8XX_FRAME_NOWAIT);
 890                 lcdc_write(stat, LCD_STAT_REG);
 891                 lcd_enable_raster();
 892         } else if (stat & LCD_PL_LOAD_DONE) {
 893                 /*
 894                  * Must disable raster before changing state of any control bit.
 895                  * And also must be disabled before clearing the PL loading
 896                  * interrupt via the following write to the status register. If
 897                  * this is done after then one gets multiple PL done interrupts.
 898                  */
 899                 lcd_disable_raster(DA8XX_FRAME_NOWAIT);
 900
 901                 lcdc_write(stat, LCD_STAT_REG);
 902
 903                 /* Disable PL completion inerrupt */
 904                 reg_ras  = lcdc_read(LCD_RASTER_CTRL_REG);
 905                 reg_ras &= ~LCD_V1_PL_INT_ENA;
 906                 lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
 907
 908                 /* Setup and start data loading mode */
 909                 lcd_blit(LOAD_DATA, par);
 910         } else {
 911                 lcdc_write(stat, LCD_STAT_REG);
 912
 913                 if (stat & LCD_END_OF_FRAME0) {
 914                         par->which_dma_channel_done = 0;
 915                         lcdc_write(par->dma_start,
 916                                    LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
 917                         lcdc_write(par->dma_end,
 918                                    LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
 919                         par->vsync_flag = 1;
 920                         wake_up_interruptible(&par->vsync_wait);
 921                 }
 922
 923                 if (stat & LCD_END_OF_FRAME1) {
 924                         par->which_dma_channel_done = 1;
 925                         lcdc_write(par->dma_start,
 926                                    LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
 927                         lcdc_write(par->dma_end,
 928                                    LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
 929                         par->vsync_flag = 1;
 930                         wake_up_interruptible(&par->vsync_wait);
 931                 }
 932         }
 933
 934         return IRQ_HANDLED;
 935 }
 936
 937 static int fb_check_var(struct fb_var_screeninfo *var,
 938                         struct fb_info *info)
 939 {
 940         int err = 0;
 941         struct da8xx_fb_par *par = info->par;
 942         int bpp = var->bits_per_pixel >> 3;
 943         unsigned long line_size = var->xres_virtual * bpp;
 944
 945         if (var->bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1)
 946                 return -EINVAL;
 947
 948         switch (var->bits_per_pixel) {
 949         case 1:
 950         case 8:
 951                 var->red.offset = 0;
 952                 var->red.length = 8;
 953                 var->green.offset = 0;
 954                 var->green.length = 8;
 955                 var->blue.offset = 0;
 956                 var->blue.length = 8;
 957                 var->transp.offset = 0;
 958                 var->transp.length = 0;
 959                 var->nonstd = 0;
 960                 break;
 961         case 4:
 962                 var->red.offset = 0;
 963                 var->red.length = 4;
 964                 var->green.offset = 0;
 965                 var->green.length = 4;
 966                 var->blue.offset = 0;
 967                 var->blue.length = 4;
 968                 var->transp.offset = 0;
 969                 var->transp.length = 0;
 970                 var->nonstd = FB_NONSTD_REV_PIX_IN_B;
 971                 break;
 972         case 16:                /* RGB 565 */
 973                 var->red.offset = 11;
 974                 var->red.length = 5;
 975                 var->green.offset = 5;
 976                 var->green.length = 6;
 977                 var->blue.offset = 0;
 978                 var->blue.length = 5;
 979                 var->transp.offset = 0;
 980                 var->transp.length = 0;
 981                 var->nonstd = 0;
 982                 break;
 983         case 24:
 984                 var->red.offset = 16;
 985                 var->red.length = 8;
 986                 var->green.offset = 8;
 987                 var->green.length = 8;
 988                 var->blue.offset = 0;
 989                 var->blue.length = 8;
 990                 var->nonstd = 0;
 991                 break;
 992         case 32:
 993                 var->transp.offset = 24;
 994                 var->transp.length = 8;
 995                 var->red.offset = 16;
 996                 var->red.length = 8;
 997                 var->green.offset = 8;
 998                 var->green.length = 8;
 999                 var->blue.offset = 0;
1000                 var->blue.length = 8;
1001                 var->nonstd = 0;
1002                 break;
1003         default:
1004                 err = -EINVAL;
1005         }
1006
1007         var->red.msb_right = 0;
1008         var->green.msb_right = 0;
1009         var->blue.msb_right = 0;
1010         var->transp.msb_right = 0;
1011
1012         if (line_size * var->yres_virtual > par->vram_size)
1013                 var->yres_virtual = par->vram_size / line_size;
1014
1015         if (var->yres > var->yres_virtual)
1016                 var->yres = var->yres_virtual;
1017
1018         if (var->xres > var->xres_virtual)
1019                 var->xres = var->xres_virtual;
1020
1021         if (var->xres + var->xoffset > var->xres_virtual)
1022                 var->xoffset = var->xres_virtual - var->xres;
1023         if (var->yres + var->yoffset > var->yres_virtual)
1024                 var->yoffset = var->yres_virtual - var->yres;
1025
1026         var->pixclock = da8xx_fb_round_clk(par, var->pixclock);
1027
1028         return err;
1029 }
1030
1031 #ifdef CONFIG_CPU_FREQ
1032 static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
1033                                      unsigned long val, void *data)
1034 {
1035         struct da8xx_fb_par *par;
1036
1037         par = container_of(nb, struct da8xx_fb_par, freq_transition);
1038         if (val == CPUFREQ_POSTCHANGE) {
1039                 if (par->lcdc_clk_rate != clk_get_rate(par->lcdc_clk)) {
1040                         par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
1041                         lcd_disable_raster(DA8XX_FRAME_WAIT);
1042                         da8xx_fb_calc_config_clk_divider(par, &par->mode);
1043                         if (par->blank == FB_BLANK_UNBLANK)
1044                                 lcd_enable_raster();
1045                 }
1046         }
1047
1048         return 0;
1049 }
1050
1051 static int lcd_da8xx_cpufreq_register(struct da8xx_fb_par *par)
1052 {
1053         par->freq_transition.notifier_call = lcd_da8xx_cpufreq_transition;
1054
1055         return cpufreq_register_notifier(&par->freq_transition,
1056                                          CPUFREQ_TRANSITION_NOTIFIER);
1057 }
1058
1059 static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par)
1060 {
1061         cpufreq_unregister_notifier(&par->freq_transition,
1062                                     CPUFREQ_TRANSITION_NOTIFIER);
1063 }
1064 #endif
1065
1066 static int fb_remove(struct platform_device *dev)
1067 {
1068         struct fb_info *info = dev_get_drvdata(&dev->dev);
1069
1070         if (info) {
1071                 struct da8xx_fb_par *par = info->par;
1072
1073 #ifdef CONFIG_CPU_FREQ
1074                 lcd_da8xx_cpufreq_deregister(par);
1075 #endif
1076                 if (par->panel_power_ctrl)
1077                         par->panel_power_ctrl(0);
1078
1079                 lcd_disable_raster(DA8XX_FRAME_WAIT);
1080                 lcdc_write(0, LCD_RASTER_CTRL_REG);
1081
1082                 /* disable DMA  */
1083                 lcdc_write(0, LCD_DMA_CTRL_REG);
1084
1085                 unregister_framebuffer(info);
1086                 fb_dealloc_cmap(&info->cmap);
1087                 dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
1088                                   par->p_palette_base);
1089                 dma_free_coherent(NULL, par->vram_size, par->vram_virt,
1090                                   par->vram_phys);
1091                 pm_runtime_put_sync(&dev->dev);
1092                 pm_runtime_disable(&dev->dev);
1093                 framebuffer_release(info);
1094
1095         }
1096         return 0;
1097 }
1098
1099 /*
1100  * Function to wait for vertical sync which for this LCD peripheral
1101  * translates into waiting for the current raster frame to complete.
1102  */
1103 static int fb_wait_for_vsync(struct fb_info *info)
1104 {
1105         struct da8xx_fb_par *par = info->par;
1106         int ret;
1107
1108         /*
1109          * Set flag to 0 and wait for isr to set to 1. It would seem there is a
1110          * race condition here where the ISR could have occurred just before or
1111          * just after this set. But since we are just coarsely waiting for
1112          * a frame to complete then that's OK. i.e. if the frame completed
1113          * just before this code executed then we have to wait another full
1114          * frame time but there is no way to avoid such a situation. On the
1115          * other hand if the frame completed just after then we don't need
1116          * to wait long at all. Either way we are guaranteed to return to the
1117          * user immediately after a frame completion which is all that is
1118          * required.
1119          */
1120         par->vsync_flag = 0;
1121         ret = wait_event_interruptible_timeout(par->vsync_wait,
1122                                                par->vsync_flag != 0,
1123                                                par->vsync_timeout);
1124         if (ret < 0)
1125                 return ret;
1126         if (ret == 0)
1127                 return -ETIMEDOUT;
1128
1129         return 0;
1130 }
1131
1132 static int fb_ioctl(struct fb_info *info, unsigned int cmd,
1133                           unsigned long arg)
1134 {
1135         struct lcd_sync_arg sync_arg;
1136
1137         switch (cmd) {
1138         case FBIOGET_CONTRAST:
1139         case FBIOPUT_CONTRAST:
1140         case FBIGET_BRIGHTNESS:
1141         case FBIPUT_BRIGHTNESS:
1142         case FBIGET_COLOR:
1143         case FBIPUT_COLOR:
1144                 return -ENOTTY;
1145         case FBIPUT_HSYNC:
1146                 if (copy_from_user(&sync_arg, (char *)arg,
1147                                 sizeof(struct lcd_sync_arg)))
1148                         return -EFAULT;
1149                 lcd_cfg_horizontal_sync(sync_arg.back_porch,
1150                                         sync_arg.pulse_width,
1151                                         sync_arg.front_porch);
1152                 break;
1153         case FBIPUT_VSYNC:
1154                 if (copy_from_user(&sync_arg, (char *)arg,
1155                                 sizeof(struct lcd_sync_arg)))
1156                         return -EFAULT;
1157                 lcd_cfg_vertical_sync(sync_arg.back_porch,
1158                                         sync_arg.pulse_width,
1159                                         sync_arg.front_porch);
1160                 break;
1161         case FBIO_WAITFORVSYNC:
1162                 return fb_wait_for_vsync(info);
1163         default:
1164                 return -EINVAL;
1165         }
1166         return 0;
1167 }
1168
1169 static int cfb_blank(int blank, struct fb_info *info)
1170 {
1171         struct da8xx_fb_par *par = info->par;
1172         int ret = 0;
1173
1174         if (par->blank == blank)
1175                 return 0;
1176
1177         par->blank = blank;
1178         switch (blank) {
1179         case FB_BLANK_UNBLANK:
1180                 lcd_enable_raster();
1181
1182                 if (par->panel_power_ctrl)
1183                         par->panel_power_ctrl(1);
1184                 break;
1185         case FB_BLANK_NORMAL:
1186         case FB_BLANK_VSYNC_SUSPEND:
1187         case FB_BLANK_HSYNC_SUSPEND:
1188         case FB_BLANK_POWERDOWN:
1189                 if (par->panel_power_ctrl)
1190                         par->panel_power_ctrl(0);
1191
1192                 lcd_disable_raster(DA8XX_FRAME_WAIT);
1193                 break;
1194         default:
1195                 ret = -EINVAL;
1196         }
1197
1198         return ret;
1199 }
1200
1201 /*
1202  * Set new x,y offsets in the virtual display for the visible area and switch
1203  * to the new mode.
1204  */
1205 static int da8xx_pan_display(struct fb_var_screeninfo *var,
1206                              struct fb_info *fbi)
1207 {
1208         int ret = 0;
1209         struct fb_var_screeninfo new_var;
1210         struct da8xx_fb_par         *par = fbi->par;
1211         struct fb_fix_screeninfo    *fix = &fbi->fix;
1212         unsigned int end;
1213         unsigned int start;
1214         unsigned long irq_flags;
1215
1216         if (var->xoffset != fbi->var.xoffset ||
1217                         var->yoffset != fbi->var.yoffset) {
1218                 memcpy(&new_var, &fbi->var, sizeof(new_var));
1219                 new_var.xoffset = var->xoffset;
1220                 new_var.yoffset = var->yoffset;
1221                 if (fb_check_var(&new_var, fbi))
1222                         ret = -EINVAL;
1223                 else {
1224                         memcpy(&fbi->var, &new_var, sizeof(new_var));
1225
1226                         start   = fix->smem_start +
1227                                 new_var.yoffset * fix->line_length +
1228                                 new_var.xoffset * fbi->var.bits_per_pixel / 8;
1229                         end     = start + fbi->var.yres * fix->line_length - 1;
1230                         par->dma_start  = start;
1231                         par->dma_end    = end;
1232                         spin_lock_irqsave(&par->lock_for_chan_update,
1233                                         irq_flags);
1234                         if (par->which_dma_channel_done == 0) {
1235                                 lcdc_write(par->dma_start,
1236                                            LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
1237                                 lcdc_write(par->dma_end,
1238                                            LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
1239                         } else if (par->which_dma_channel_done == 1) {
1240                                 lcdc_write(par->dma_start,
1241                                            LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
1242                                 lcdc_write(par->dma_end,
1243                                            LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
1244                         }
1245                         spin_unlock_irqrestore(&par->lock_for_chan_update,
1246                                         irq_flags);
1247                 }
1248         }
1249
1250         return ret;
1251 }
1252
1253 static int da8xxfb_set_par(struct fb_info *info)
1254 {
1255         struct da8xx_fb_par *par = info->par;
1256         int ret;
1257         bool raster = da8xx_fb_is_raster_enabled();
1258
1259         if (raster)
1260                 lcd_disable_raster(DA8XX_FRAME_WAIT);
1261
1262         fb_var_to_videomode(&par->mode, &info->var);
1263
1264         par->cfg.bpp = info->var.bits_per_pixel;
1265
1266         info->fix.visual = (par->cfg.bpp <= 8) ?
1267                                 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
1268         info->fix.line_length = (par->mode.xres * par->cfg.bpp) / 8;
1269
1270         ret = lcd_init(par, &par->cfg, &par->mode);
1271         if (ret < 0) {
1272                 dev_err(par->dev, "lcd init failed\n");
1273                 return ret;
1274         }
1275
1276         par->dma_start = info->fix.smem_start +
1277                          info->var.yoffset * info->fix.line_length +
1278                          info->var.xoffset * info->var.bits_per_pixel / 8;
1279         par->dma_end   = par->dma_start +
1280                          info->var.yres * info->fix.line_length - 1;
1281
1282         lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
1283         lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
1284         lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
1285         lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
1286
1287         if (raster)
1288                 lcd_enable_raster();
1289
1290         return 0;
1291 }
1292
1293 static struct fb_ops da8xx_fb_ops = {
1294         .owner = THIS_MODULE,
1295         .fb_check_var = fb_check_var,
1296         .fb_set_par = da8xxfb_set_par,
1297         .fb_setcolreg = fb_setcolreg,
1298         .fb_pan_display = da8xx_pan_display,
1299         .fb_ioctl = fb_ioctl,
1300         .fb_fillrect = cfb_fillrect,
1301         .fb_copyarea = cfb_copyarea,
1302         .fb_imageblit = cfb_imageblit,
1303         .fb_blank = cfb_blank,
1304 };
1305
1306 static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
1307 {
1308         struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
1309         struct fb_videomode *lcdc_info;
1310         int i;
1311
1312         for (i = 0, lcdc_info = known_lcd_panels;
1313                 i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
1314                 if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
1315                         break;
1316         }
1317
1318         if (i == ARRAY_SIZE(known_lcd_panels)) {
1319                 dev_err(&dev->dev, "no panel found\n");
1320                 return NULL;
1321         }
1322         dev_info(&dev->dev, "found %s panel\n", lcdc_info->name);
1323
1324         return lcdc_info;
1325 }
1326
1327 static int fb_probe(struct platform_device *device)
1328 {
1329         struct da8xx_lcdc_platform_data *fb_pdata =
1330                                                 dev_get_platdata(&device->dev);
1331         static struct resource *lcdc_regs;
1332         struct lcd_ctrl_config *lcd_cfg;
1333         struct fb_videomode *lcdc_info;
1334         struct fb_info *da8xx_fb_info;
1335         struct da8xx_fb_par *par;
1336         struct clk *tmp_lcdc_clk;
1337         int ret;
1338         unsigned long ulcm;
1339
1340         if (fb_pdata == NULL) {
1341                 dev_err(&device->dev, "Can not get platform data\n");
1342                 return -ENOENT;
1343         }
1344
1345         lcdc_info = da8xx_fb_get_videomode(device);
1346         if (lcdc_info == NULL)
1347                 return -ENODEV;
1348
1349         lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0);
1350         da8xx_fb_reg_base = devm_ioremap_resource(&device->dev, lcdc_regs);
1351         if (IS_ERR(da8xx_fb_reg_base))
1352                 return PTR_ERR(da8xx_fb_reg_base);
1353
1354         tmp_lcdc_clk = devm_clk_get(&device->dev, "fck");
1355         if (IS_ERR(tmp_lcdc_clk)) {
1356                 dev_err(&device->dev, "Can not get device clock\n");
1357                 return PTR_ERR(tmp_lcdc_clk);
1358         }
1359
1360         pm_runtime_enable(&device->dev);
1361         pm_runtime_get_sync(&device->dev);
1362
1363         /* Determine LCD IP Version */
1364         switch (lcdc_read(LCD_PID_REG)) {
1365         case 0x4C100102:
1366                 lcd_revision = LCD_VERSION_1;
1367                 break;
1368         case 0x4F200800:
1369         case 0x4F201000:
1370                 lcd_revision = LCD_VERSION_2;
1371                 break;
1372         default:
1373                 dev_warn(&device->dev, "Unknown PID Reg value 0x%x, "
1374                                 "defaulting to LCD revision 1\n",
1375                                 lcdc_read(LCD_PID_REG));
1376                 lcd_revision = LCD_VERSION_1;
1377                 break;
1378         }
1379
1380         lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
1381
1382         if (!lcd_cfg) {
1383                 ret = -EINVAL;
1384                 goto err_pm_runtime_disable;
1385         }
1386
1387         da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par),
1388                                         &device->dev);
1389         if (!da8xx_fb_info) {
1390                 dev_dbg(&device->dev, "Memory allocation failed for fb_info\n");
1391                 ret = -ENOMEM;
1392                 goto err_pm_runtime_disable;
1393         }
1394
1395         par = da8xx_fb_info->par;
1396         par->dev = &device->dev;
1397         par->lcdc_clk = tmp_lcdc_clk;
1398         par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
1399         if (fb_pdata->panel_power_ctrl) {
1400                 par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
1401                 par->panel_power_ctrl(1);
1402         }
1403
1404         fb_videomode_to_var(&da8xx_fb_var, lcdc_info);
1405         par->cfg = *lcd_cfg;
1406
1407         da8xx_fb_lcd_reset();
1408
1409         /* allocate frame buffer */
1410         par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp;
1411         ulcm = lcm((lcdc_info->xres * lcd_cfg->bpp)/8, PAGE_SIZE);
1412         par->vram_size = roundup(par->vram_size/8, ulcm);
1413         par->vram_size = par->vram_size * LCD_NUM_BUFFERS;
1414
1415         par->vram_virt = dma_alloc_coherent(NULL,
1416                                             par->vram_size,
1417                                             (resource_size_t *) &par->vram_phys,
1418                                             GFP_KERNEL | GFP_DMA);
1419         if (!par->vram_virt) {
1420                 dev_err(&device->dev,
1421                         "GLCD: kmalloc for frame buffer failed\n");
1422                 ret = -EINVAL;
1423                 goto err_release_fb;
1424         }
1425
1426         da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt;
1427         da8xx_fb_fix.smem_start    = par->vram_phys;
1428         da8xx_fb_fix.smem_len      = par->vram_size;
1429         da8xx_fb_fix.line_length   = (lcdc_info->xres * lcd_cfg->bpp) / 8;
1430
1431         par->dma_start = par->vram_phys;
1432         par->dma_end   = par->dma_start + lcdc_info->yres *
1433                 da8xx_fb_fix.line_length - 1;
1434
1435         /* allocate palette buffer */
1436         par->v_palette_base = dma_alloc_coherent(NULL,
1437                                                PALETTE_SIZE,
1438                                                (resource_size_t *)
1439                                                &par->p_palette_base,
1440                                                GFP_KERNEL | GFP_DMA);
1441         if (!par->v_palette_base) {
1442                 dev_err(&device->dev,
1443                         "GLCD: kmalloc for palette buffer failed\n");
1444                 ret = -EINVAL;
1445                 goto err_release_fb_mem;
1446         }
1447         memset(par->v_palette_base, 0, PALETTE_SIZE);
1448
1449         par->irq = platform_get_irq(device, 0);
1450         if (par->irq < 0) {
1451                 ret = -ENOENT;
1452                 goto err_release_pl_mem;
1453         }
1454
1455         da8xx_fb_var.grayscale =
1456             lcd_cfg->panel_shade == MONOCHROME ? 1 : 0;
1457         da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp;
1458
1459         /* Initialize fbinfo */
1460         da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
1461         da8xx_fb_info->fix = da8xx_fb_fix;
1462         da8xx_fb_info->var = da8xx_fb_var;
1463         da8xx_fb_info->fbops = &da8xx_fb_ops;
1464         da8xx_fb_info->pseudo_palette = par->pseudo_palette;
1465         da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
1466                                 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
1467
1468         ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
1469         if (ret)
1470                 goto err_release_pl_mem;
1471         da8xx_fb_info->cmap.len = par->palette_sz;
1472
1473         /* initialize var_screeninfo */
1474         da8xx_fb_var.activate = FB_ACTIVATE_FORCE;
1475         fb_set_var(da8xx_fb_info, &da8xx_fb_var);
1476
1477         dev_set_drvdata(&device->dev, da8xx_fb_info);
1478
1479         /* initialize the vsync wait queue */
1480         init_waitqueue_head(&par->vsync_wait);
1481         par->vsync_timeout = HZ / 5;
1482         par->which_dma_channel_done = -1;
1483         spin_lock_init(&par->lock_for_chan_update);
1484
1485         /* Register the Frame Buffer  */
1486         if (register_framebuffer(da8xx_fb_info) < 0) {
1487                 dev_err(&device->dev,
1488                         "GLCD: Frame Buffer Registration Failed!\n");
1489                 ret = -EINVAL;
1490                 goto err_dealloc_cmap;
1491         }
1492
1493 #ifdef CONFIG_CPU_FREQ
1494         ret = lcd_da8xx_cpufreq_register(par);
1495         if (ret) {
1496                 dev_err(&device->dev, "failed to register cpufreq\n");
1497                 goto err_cpu_freq;
1498         }
1499 #endif
1500
1501         if (lcd_revision == LCD_VERSION_1)
1502                 lcdc_irq_handler = lcdc_irq_handler_rev01;
1503         else {
1504                 init_waitqueue_head(&frame_done_wq);
1505                 lcdc_irq_handler = lcdc_irq_handler_rev02;
1506         }
1507
1508         ret = devm_request_irq(&device->dev, par->irq, lcdc_irq_handler, 0,
1509                                DRIVER_NAME, par);
1510         if (ret)
1511                 goto irq_freq;
1512         return 0;
1513
1514 irq_freq:
1515 #ifdef CONFIG_CPU_FREQ
1516         lcd_da8xx_cpufreq_deregister(par);
1517 err_cpu_freq:
1518 #endif
1519         unregister_framebuffer(da8xx_fb_info);
1520
1521 err_dealloc_cmap:
1522         fb_dealloc_cmap(&da8xx_fb_info->cmap);
1523
1524 err_release_pl_mem:
1525         dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
1526                           par->p_palette_base);
1527
1528 err_release_fb_mem:
1529         dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys);
1530
1531 err_release_fb:
1532         framebuffer_release(da8xx_fb_info);
1533
1534 err_pm_runtime_disable:
1535         pm_runtime_put_sync(&device->dev);
1536         pm_runtime_disable(&device->dev);
1537
1538         return ret;
1539 }
1540
1541 #ifdef CONFIG_PM_SLEEP
1542 static struct lcdc_context {
1543         u32 clk_enable;
1544         u32 ctrl;
1545         u32 dma_ctrl;
1546         u32 raster_timing_0;
1547         u32 raster_timing_1;
1548         u32 raster_timing_2;
1549         u32 int_enable_set;
1550         u32 dma_frm_buf_base_addr_0;
1551         u32 dma_frm_buf_ceiling_addr_0;
1552         u32 dma_frm_buf_base_addr_1;
1553         u32 dma_frm_buf_ceiling_addr_1;
1554         u32 raster_ctrl;
1555 } reg_context;
1556
1557 static void lcd_context_save(void)
1558 {
1559         if (lcd_revision == LCD_VERSION_2) {
1560                 reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG);
1561                 reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG);
1562         }
1563
1564         reg_context.ctrl = lcdc_read(LCD_CTRL_REG);
1565         reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG);
1566         reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG);
1567         reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG);
1568         reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG);
1569         reg_context.dma_frm_buf_base_addr_0 =
1570                 lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
1571         reg_context.dma_frm_buf_ceiling_addr_0 =
1572                 lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
1573         reg_context.dma_frm_buf_base_addr_1 =
1574                 lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
1575         reg_context.dma_frm_buf_ceiling_addr_1 =
1576                 lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
1577         reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG);
1578         return;
1579 }
1580
1581 static void lcd_context_restore(void)
1582 {
1583         if (lcd_revision == LCD_VERSION_2) {
1584                 lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG);
1585                 lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG);
1586         }
1587
1588         lcdc_write(reg_context.ctrl, LCD_CTRL_REG);
1589         lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG);
1590         lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG);
1591         lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG);
1592         lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG);
1593         lcdc_write(reg_context.dma_frm_buf_base_addr_0,
1594                         LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
1595         lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0,
1596                         LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
1597         lcdc_write(reg_context.dma_frm_buf_base_addr_1,
1598                         LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
1599         lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1,
1600                         LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
1601         lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG);
1602         return;
1603 }
1604
1605 static int fb_suspend(struct device *dev)
1606 {
1607         struct fb_info *info = dev_get_drvdata(dev);
1608         struct da8xx_fb_par *par = info->par;
1609
1610         console_lock();
1611         if (par->panel_power_ctrl)
1612                 par->panel_power_ctrl(0);
1613
1614         fb_set_suspend(info, 1);
1615         lcd_disable_raster(DA8XX_FRAME_WAIT);
1616         lcd_context_save();
1617         pm_runtime_put_sync(dev);
1618         console_unlock();
1619
1620         return 0;
1621 }
1622 static int fb_resume(struct device *dev)
1623 {
1624         struct fb_info *info = dev_get_drvdata(dev);
1625         struct da8xx_fb_par *par = info->par;
1626
1627         console_lock();
1628         pm_runtime_get_sync(dev);
1629         lcd_context_restore();
1630         if (par->blank == FB_BLANK_UNBLANK) {
1631                 lcd_enable_raster();
1632
1633                 if (par->panel_power_ctrl)
1634                         par->panel_power_ctrl(1);
1635         }
1636
1637         fb_set_suspend(info, 0);
1638         console_unlock();
1639
1640         return 0;
1641 }
1642 #endif
1643
1644 static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
1645
1646 static struct platform_driver da8xx_fb_driver = {
1647         .probe = fb_probe,
1648         .remove = fb_remove,
1649         .driver = {
1650                    .name = DRIVER_NAME,
1651                    .owner = THIS_MODULE,
1652                    .pm  = &fb_pm_ops,
1653                    },
1654 };
1655 module_platform_driver(da8xx_fb_driver);
1656
1657 MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx");
1658 MODULE_AUTHOR("Texas Instruments");
1659 MODULE_LICENSE("GPL");