]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/watchdog/sa1100_wdt.c
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[karo-tx-linux.git] / drivers / watchdog / sa1100_wdt.c
1 /*
2  *      Watchdog driver for the SA11x0/PXA2xx
3  *
4  *      (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
5  *          Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
6  *
7  *      This program is free software; you can redistribute it and/or
8  *      modify it under the terms of the GNU General Public License
9  *      as published by the Free Software Foundation; either version
10  *      2 of the License, or (at your option) any later version.
11  *
12  *      Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
13  *      warranty for any of this software. This material is provided
14  *      "AS-IS" and at no charge.
15  *
16  *      (c) Copyright 2000           Oleg Drokin <green@crimea.edu>
17  *
18  *      27/11/2000 Initial release
19  */
20
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/types.h>
26 #include <linux/kernel.h>
27 #include <linux/fs.h>
28 #include <linux/miscdevice.h>
29 #include <linux/watchdog.h>
30 #include <linux/init.h>
31 #include <linux/io.h>
32 #include <linux/bitops.h>
33 #include <linux/uaccess.h>
34 #include <linux/timex.h>
35
36 #ifdef CONFIG_ARCH_PXA
37 #include <mach/regs-ost.h>
38 #endif
39
40 #include <mach/reset.h>
41 #include <mach/hardware.h>
42
43 static unsigned long oscr_freq;
44 static unsigned long sa1100wdt_users;
45 static unsigned int pre_margin;
46 static int boot_status;
47
48 /*
49  *      Allow only one person to hold it open
50  */
51 static int sa1100dog_open(struct inode *inode, struct file *file)
52 {
53         if (test_and_set_bit(1, &sa1100wdt_users))
54                 return -EBUSY;
55
56         /* Activate SA1100 Watchdog timer */
57         writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
58         writel_relaxed(OSSR_M3, OSSR);
59         writel_relaxed(OWER_WME, OWER);
60         writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
61         return nonseekable_open(inode, file);
62 }
63
64 /*
65  * The watchdog cannot be disabled.
66  *
67  * Previous comments suggested that turning off the interrupt by
68  * clearing OIER[E3] would prevent the watchdog timing out but this
69  * does not appear to be true (at least on the PXA255).
70  */
71 static int sa1100dog_release(struct inode *inode, struct file *file)
72 {
73         pr_crit("Device closed - timer will not stop\n");
74         clear_bit(1, &sa1100wdt_users);
75         return 0;
76 }
77
78 static ssize_t sa1100dog_write(struct file *file, const char __user *data,
79                                                 size_t len, loff_t *ppos)
80 {
81         if (len)
82                 /* Refresh OSMR3 timer. */
83                 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
84         return len;
85 }
86
87 static const struct watchdog_info ident = {
88         .options        = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
89                                 | WDIOF_KEEPALIVEPING,
90         .identity       = "SA1100/PXA255 Watchdog",
91         .firmware_version       = 1,
92 };
93
94 static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
95                                                         unsigned long arg)
96 {
97         int ret = -ENOTTY;
98         int time;
99         void __user *argp = (void __user *)arg;
100         int __user *p = argp;
101
102         switch (cmd) {
103         case WDIOC_GETSUPPORT:
104                 ret = copy_to_user(argp, &ident,
105                                    sizeof(ident)) ? -EFAULT : 0;
106                 break;
107
108         case WDIOC_GETSTATUS:
109                 ret = put_user(0, p);
110                 break;
111
112         case WDIOC_GETBOOTSTATUS:
113                 ret = put_user(boot_status, p);
114                 break;
115
116         case WDIOC_KEEPALIVE:
117                 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
118                 ret = 0;
119                 break;
120
121         case WDIOC_SETTIMEOUT:
122                 ret = get_user(time, p);
123                 if (ret)
124                         break;
125
126                 if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
127                         ret = -EINVAL;
128                         break;
129                 }
130
131                 pre_margin = oscr_freq * time;
132                 writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
133                 /*fall through*/
134
135         case WDIOC_GETTIMEOUT:
136                 ret = put_user(pre_margin / oscr_freq, p);
137                 break;
138         }
139         return ret;
140 }
141
142 static const struct file_operations sa1100dog_fops = {
143         .owner          = THIS_MODULE,
144         .llseek         = no_llseek,
145         .write          = sa1100dog_write,
146         .unlocked_ioctl = sa1100dog_ioctl,
147         .open           = sa1100dog_open,
148         .release        = sa1100dog_release,
149 };
150
151 static struct miscdevice sa1100dog_miscdev = {
152         .minor          = WATCHDOG_MINOR,
153         .name           = "watchdog",
154         .fops           = &sa1100dog_fops,
155 };
156
157 static int margin __initdata = 60;              /* (secs) Default is 1 minute */
158
159 static int __init sa1100dog_init(void)
160 {
161         int ret;
162
163         oscr_freq = get_clock_tick_rate();
164
165         /*
166          * Read the reset status, and save it for later.  If
167          * we suspend, RCSR will be cleared, and the watchdog
168          * reset reason will be lost.
169          */
170         boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
171                                 WDIOF_CARDRESET : 0;
172         pre_margin = oscr_freq * margin;
173
174         ret = misc_register(&sa1100dog_miscdev);
175         if (ret == 0)
176                 pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
177                         margin);
178         return ret;
179 }
180
181 static void __exit sa1100dog_exit(void)
182 {
183         misc_deregister(&sa1100dog_miscdev);
184 }
185
186 module_init(sa1100dog_init);
187 module_exit(sa1100dog_exit);
188
189 MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
190 MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
191
192 module_param(margin, int, 0);
193 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
194
195 MODULE_LICENSE("GPL");