]> git.karo-electronics.de Git - linux-beck.git/blob - drivers/watchdog/ux500_wdt.c
watchdog: pnx4008: restart: support "cmd" from userspace
[linux-beck.git] / drivers / watchdog / ux500_wdt.c
1 /*
2  * Copyright (C) ST-Ericsson SA 2011-2013
3  *
4  * License Terms: GNU General Public License v2
5  *
6  * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson
7  * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
8  */
9
10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/moduleparam.h>
15 #include <linux/err.h>
16 #include <linux/uaccess.h>
17 #include <linux/watchdog.h>
18 #include <linux/platform_device.h>
19 #include <linux/platform_data/ux500_wdt.h>
20
21 #include <linux/mfd/dbx500-prcmu.h>
22
23 #define WATCHDOG_TIMEOUT 600 /* 10 minutes */
24
25 #define WATCHDOG_MIN    0
26 #define WATCHDOG_MAX28  268435  /* 28 bit resolution in ms == 268435.455 s */
27 #define WATCHDOG_MAX32  4294967 /* 32 bit resolution in ms == 4294967.295 s */
28
29 static unsigned int timeout = WATCHDOG_TIMEOUT;
30 module_param(timeout, uint, 0);
31 MODULE_PARM_DESC(timeout,
32         "Watchdog timeout in seconds. default="
33                                 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
34
35 static bool nowayout = WATCHDOG_NOWAYOUT;
36 module_param(nowayout, bool, 0);
37 MODULE_PARM_DESC(nowayout,
38         "Watchdog cannot be stopped once started (default="
39                                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
40
41 static int ux500_wdt_start(struct watchdog_device *wdd)
42 {
43         return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
44 }
45
46 static int ux500_wdt_stop(struct watchdog_device *wdd)
47 {
48         return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
49 }
50
51 static int ux500_wdt_keepalive(struct watchdog_device *wdd)
52 {
53         return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
54 }
55
56 static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
57                                  unsigned int timeout)
58 {
59         ux500_wdt_stop(wdd);
60         prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
61         ux500_wdt_start(wdd);
62
63         return 0;
64 }
65
66 static const struct watchdog_info ux500_wdt_info = {
67         .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
68         .identity = "Ux500 WDT",
69         .firmware_version = 1,
70 };
71
72 static const struct watchdog_ops ux500_wdt_ops = {
73         .owner = THIS_MODULE,
74         .start = ux500_wdt_start,
75         .stop  = ux500_wdt_stop,
76         .ping  = ux500_wdt_keepalive,
77         .set_timeout = ux500_wdt_set_timeout,
78 };
79
80 static struct watchdog_device ux500_wdt = {
81         .info = &ux500_wdt_info,
82         .ops = &ux500_wdt_ops,
83         .min_timeout = WATCHDOG_MIN,
84         .max_timeout = WATCHDOG_MAX32,
85 };
86
87 static int ux500_wdt_probe(struct platform_device *pdev)
88 {
89         int ret;
90         struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev);
91
92         if (pdata) {
93                 if (pdata->timeout > 0)
94                         timeout = pdata->timeout;
95                 if (pdata->has_28_bits_resolution)
96                         ux500_wdt.max_timeout = WATCHDOG_MAX28;
97         }
98
99         ux500_wdt.parent = &pdev->dev;
100         watchdog_set_nowayout(&ux500_wdt, nowayout);
101
102         /* disable auto off on sleep */
103         prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
104
105         /* set HW initial value */
106         prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
107
108         ret = watchdog_register_device(&ux500_wdt);
109         if (ret)
110                 return ret;
111
112         dev_info(&pdev->dev, "initialized\n");
113
114         return 0;
115 }
116
117 static int ux500_wdt_remove(struct platform_device *dev)
118 {
119         watchdog_unregister_device(&ux500_wdt);
120
121         return 0;
122 }
123
124 #ifdef CONFIG_PM
125 static int ux500_wdt_suspend(struct platform_device *pdev,
126                              pm_message_t state)
127 {
128         if (watchdog_active(&ux500_wdt)) {
129                 ux500_wdt_stop(&ux500_wdt);
130                 prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
131
132                 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
133                 ux500_wdt_start(&ux500_wdt);
134         }
135         return 0;
136 }
137
138 static int ux500_wdt_resume(struct platform_device *pdev)
139 {
140         if (watchdog_active(&ux500_wdt)) {
141                 ux500_wdt_stop(&ux500_wdt);
142                 prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
143
144                 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
145                 ux500_wdt_start(&ux500_wdt);
146         }
147         return 0;
148 }
149 #else
150 #define ux500_wdt_suspend NULL
151 #define ux500_wdt_resume NULL
152 #endif
153
154 static struct platform_driver ux500_wdt_driver = {
155         .probe          = ux500_wdt_probe,
156         .remove         = ux500_wdt_remove,
157         .suspend        = ux500_wdt_suspend,
158         .resume         = ux500_wdt_resume,
159         .driver         = {
160                 .name   = "ux500_wdt",
161         },
162 };
163
164 module_platform_driver(ux500_wdt_driver);
165
166 MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>");
167 MODULE_DESCRIPTION("Ux500 Watchdog Driver");
168 MODULE_LICENSE("GPL");
169 MODULE_ALIAS("platform:ux500_wdt");