2 * "splice": joining two ropes together by interweaving their strands.
4 * This is the "extended pipe" functionality, where a pipe is used as
5 * an arbitrary in-memory buffer. Think of a pipe as a small kernel
6 * buffer that you can use to transfer data from one end to the other.
8 * The traditional unix read/write is extended with a "splice()" operation
9 * that transfers data buffers to or from a pipe buffer.
11 * Named by Larry McVoy, original implementation from Linus, extended by
12 * Jens to support splicing to files, network, direct splicing, etc and
13 * fixing lots of bugs.
15 * Copyright (C) 2005-2006 Jens Axboe <axboe@suse.de>
16 * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
17 * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
21 #include <linux/file.h>
22 #include <linux/pagemap.h>
23 #include <linux/pipe_fs_i.h>
24 #include <linux/mm_inline.h>
25 #include <linux/swap.h>
26 #include <linux/writeback.h>
27 #include <linux/buffer_head.h>
28 #include <linux/module.h>
29 #include <linux/syscalls.h>
30 #include <linux/uio.h>
38 * Passed to splice_to_pipe
40 struct splice_pipe_desc {
41 struct page **pages; /* page map */
42 struct partial_page *partial; /* pages[] may not be contig */
43 int nr_pages; /* number of pages in map */
44 unsigned int flags; /* splice flags */
45 struct pipe_buf_operations *ops;/* ops associated with output pipe */
49 * Attempt to steal a page from a pipe buffer. This should perhaps go into
50 * a vm helper function, it's already simplified quite a bit by the
51 * addition of remove_mapping(). If success is returned, the caller may
52 * attempt to reuse this page for another destination.
54 static int page_cache_pipe_buf_steal(struct pipe_inode_info *info,
55 struct pipe_buffer *buf)
57 struct page *page = buf->page;
58 struct address_space *mapping = page_mapping(page);
62 WARN_ON(!PageUptodate(page));
65 * At least for ext2 with nobh option, we need to wait on writeback
66 * completing on this page, since we'll remove it from the pagecache.
67 * Otherwise truncate wont wait on the page, allowing the disk
68 * blocks to be reused by someone else before we actually wrote our
69 * data to them. fs corruption ensues.
71 wait_on_page_writeback(page);
73 if (PagePrivate(page))
74 try_to_release_page(page, mapping_gfp_mask(mapping));
76 if (!remove_mapping(mapping, page)) {
81 buf->flags |= PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU;
85 static void page_cache_pipe_buf_release(struct pipe_inode_info *info,
86 struct pipe_buffer *buf)
88 page_cache_release(buf->page);
90 buf->flags &= ~(PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU);
93 static void *page_cache_pipe_buf_map(struct file *file,
94 struct pipe_inode_info *info,
95 struct pipe_buffer *buf)
97 struct page *page = buf->page;
100 if (!PageUptodate(page)) {
104 * Page got truncated/unhashed. This will cause a 0-byte
105 * splice, if this is the first page.
107 if (!page->mapping) {
113 * Uh oh, read-error from disk.
115 if (!PageUptodate(page)) {
121 * Page is ok afterall, fall through to mapping.
132 static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info,
133 struct pipe_buffer *buf)
138 static void *user_page_pipe_buf_map(struct file *file,
139 struct pipe_inode_info *pipe,
140 struct pipe_buffer *buf)
142 return kmap(buf->page);
145 static void user_page_pipe_buf_unmap(struct pipe_inode_info *pipe,
146 struct pipe_buffer *buf)
151 static void page_cache_pipe_buf_get(struct pipe_inode_info *info,
152 struct pipe_buffer *buf)
154 page_cache_get(buf->page);
157 static struct pipe_buf_operations page_cache_pipe_buf_ops = {
159 .map = page_cache_pipe_buf_map,
160 .unmap = page_cache_pipe_buf_unmap,
161 .release = page_cache_pipe_buf_release,
162 .steal = page_cache_pipe_buf_steal,
163 .get = page_cache_pipe_buf_get,
166 static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
167 struct pipe_buffer *buf)
172 static struct pipe_buf_operations user_page_pipe_buf_ops = {
174 .map = user_page_pipe_buf_map,
175 .unmap = user_page_pipe_buf_unmap,
176 .release = page_cache_pipe_buf_release,
177 .steal = user_page_pipe_buf_steal,
178 .get = page_cache_pipe_buf_get,
182 * Pipe output worker. This sets up our pipe format with the page cache
183 * pipe buffer operations. Otherwise very similar to the regular pipe_writev().
185 static ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
186 struct splice_pipe_desc *spd)
188 int ret, do_wakeup, page_nr;
195 mutex_lock(&pipe->inode->i_mutex);
198 if (!pipe->readers) {
199 send_sig(SIGPIPE, current, 0);
205 if (pipe->nrbufs < PIPE_BUFFERS) {
206 int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1);
207 struct pipe_buffer *buf = pipe->bufs + newbuf;
209 buf->page = spd->pages[page_nr];
210 buf->offset = spd->partial[page_nr].offset;
211 buf->len = spd->partial[page_nr].len;
220 if (!--spd->nr_pages)
222 if (pipe->nrbufs < PIPE_BUFFERS)
228 if (spd->flags & SPLICE_F_NONBLOCK) {
234 if (signal_pending(current)) {
242 if (waitqueue_active(&pipe->wait))
243 wake_up_interruptible_sync(&pipe->wait);
244 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
248 pipe->waiting_writers++;
250 pipe->waiting_writers--;
254 mutex_unlock(&pipe->inode->i_mutex);
258 if (waitqueue_active(&pipe->wait))
259 wake_up_interruptible(&pipe->wait);
260 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
263 while (page_nr < spd->nr_pages)
264 page_cache_release(spd->pages[page_nr++]);
270 __generic_file_splice_read(struct file *in, loff_t *ppos,
271 struct pipe_inode_info *pipe, size_t len,
274 struct address_space *mapping = in->f_mapping;
275 unsigned int loff, nr_pages;
276 struct page *pages[PIPE_BUFFERS];
277 struct partial_page partial[PIPE_BUFFERS];
279 pgoff_t index, end_index;
283 struct splice_pipe_desc spd = {
287 .ops = &page_cache_pipe_buf_ops,
290 index = *ppos >> PAGE_CACHE_SHIFT;
291 loff = *ppos & ~PAGE_CACHE_MASK;
292 nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
294 if (nr_pages > PIPE_BUFFERS)
295 nr_pages = PIPE_BUFFERS;
298 * Initiate read-ahead on this page range. however, don't call into
299 * read-ahead if this is a non-zero offset (we are likely doing small
300 * chunk splice and the page is already there) for a single page.
302 if (!loff || nr_pages > 1)
303 page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);
306 * Now fill in the holes:
312 * Lookup the (hopefully) full range of pages we need.
314 spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
317 * If find_get_pages_contig() returned fewer pages than we needed,
320 index += spd.nr_pages;
321 while (spd.nr_pages < nr_pages) {
323 * Page could be there, find_get_pages_contig() breaks on
326 page = find_get_page(mapping, index);
329 * page didn't exist, allocate one.
331 page = page_cache_alloc_cold(mapping);
335 error = add_to_page_cache_lru(page, mapping, index,
336 mapping_gfp_mask(mapping));
337 if (unlikely(error)) {
338 page_cache_release(page);
342 * add_to_page_cache() locks the page, unlock it
343 * to avoid convoluting the logic below even more.
348 pages[spd.nr_pages++] = page;
353 * Now loop over the map and see if we need to start IO on any
354 * pages, fill in the partial map, etc.
356 index = *ppos >> PAGE_CACHE_SHIFT;
357 nr_pages = spd.nr_pages;
359 for (page_nr = 0; page_nr < nr_pages; page_nr++) {
360 unsigned int this_len;
366 * this_len is the max we'll use from this page
368 this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
369 page = pages[page_nr];
372 * If the page isn't uptodate, we may need to start io on it
374 if (!PageUptodate(page)) {
376 * If in nonblock mode then dont block on waiting
377 * for an in-flight io page
379 if (flags & SPLICE_F_NONBLOCK)
385 * page was truncated, stop here. if this isn't the
386 * first page, we'll just complete what we already
389 if (!page->mapping) {
394 * page was already under io and is now done, great
396 if (PageUptodate(page)) {
402 * need to read in the page
404 error = mapping->a_ops->readpage(in, page);
405 if (unlikely(error)) {
407 * We really should re-lookup the page here,
408 * but it complicates things a lot. Instead
409 * lets just do what we already stored, and
410 * we'll get it the next time we are called.
412 if (error == AOP_TRUNCATED_PAGE)
419 * i_size must be checked after ->readpage().
421 isize = i_size_read(mapping->host);
422 end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
423 if (unlikely(!isize || index > end_index))
427 * if this is the last page, see if we need to shrink
428 * the length and stop
430 if (end_index == index) {
431 loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK);
432 if (total_len + loff > isize)
435 * force quit after adding this page
438 this_len = min(this_len, loff);
443 partial[page_nr].offset = loff;
444 partial[page_nr].len = this_len;
446 total_len += this_len;
453 * Release any pages at the end, if we quit early. 'i' is how far
454 * we got, 'nr_pages' is how many pages are in the map.
456 while (page_nr < nr_pages)
457 page_cache_release(pages[page_nr++]);
460 return splice_to_pipe(pipe, &spd);
466 * generic_file_splice_read - splice data from file to a pipe
467 * @in: file to splice from
468 * @pipe: pipe to splice to
469 * @len: number of bytes to splice
470 * @flags: splice modifier flags
472 * Will read pages from given file and fill them into a pipe.
474 ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
475 struct pipe_inode_info *pipe, size_t len,
485 ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
492 if (flags & SPLICE_F_NONBLOCK) {
509 EXPORT_SYMBOL(generic_file_splice_read);
512 * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
513 * using sendpage(). Return the number of bytes sent.
515 static int pipe_to_sendpage(struct pipe_inode_info *info,
516 struct pipe_buffer *buf, struct splice_desc *sd)
518 struct file *file = sd->file;
519 loff_t pos = sd->pos;
525 * Sub-optimal, but we are limited by the pipe ->map. We don't
526 * need a kmap'ed buffer here, we just want to make sure we
527 * have the page pinned if the pipe page originates from the
530 ptr = buf->ops->map(file, info, buf);
534 more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
536 ret = file->f_op->sendpage(file, buf->page, buf->offset, sd->len,
539 buf->ops->unmap(info, buf);
544 * This is a little more tricky than the file -> pipe splicing. There are
545 * basically three cases:
547 * - Destination page already exists in the address space and there
548 * are users of it. For that case we have no other option that
549 * copying the data. Tough luck.
550 * - Destination page already exists in the address space, but there
551 * are no users of it. Make sure it's uptodate, then drop it. Fall
552 * through to last case.
553 * - Destination page does not exist, we can add the pipe page to
554 * the page cache and avoid the copy.
556 * If asked to move pages to the output file (SPLICE_F_MOVE is set in
557 * sd->flags), we attempt to migrate pages from the pipe to the output
558 * file address space page cache. This is possible if no one else has
559 * the pipe page referenced outside of the pipe and page cache. If
560 * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
561 * a new page in the output file page cache and fill/dirty that.
563 static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf,
564 struct splice_desc *sd)
566 struct file *file = sd->file;
567 struct address_space *mapping = file->f_mapping;
568 gfp_t gfp_mask = mapping_gfp_mask(mapping);
569 unsigned int offset, this_len;
576 * make sure the data in this buffer is uptodate
578 src = buf->ops->map(file, info, buf);
582 index = sd->pos >> PAGE_CACHE_SHIFT;
583 offset = sd->pos & ~PAGE_CACHE_MASK;
586 if (this_len + offset > PAGE_CACHE_SIZE)
587 this_len = PAGE_CACHE_SIZE - offset;
590 * Reuse buf page, if SPLICE_F_MOVE is set.
592 if (sd->flags & SPLICE_F_MOVE) {
594 * If steal succeeds, buf->page is now pruned from the vm
595 * side (LRU and page cache) and we can reuse it. The page
596 * will also be looked on successful return.
598 if (buf->ops->steal(info, buf))
602 if (add_to_page_cache(page, mapping, index, gfp_mask))
605 if (!(buf->flags & PIPE_BUF_FLAG_LRU))
609 page = find_lock_page(mapping, index);
612 page = page_cache_alloc_cold(mapping);
617 * This will also lock the page
619 ret = add_to_page_cache_lru(page, mapping, index,
626 * We get here with the page locked. If the page is also
627 * uptodate, we don't need to do more. If it isn't, we
628 * may need to bring it in if we are not going to overwrite
631 if (!PageUptodate(page)) {
632 if (this_len < PAGE_CACHE_SIZE) {
633 ret = mapping->a_ops->readpage(file, page);
639 if (!PageUptodate(page)) {
641 * Page got invalidated, repeat.
643 if (!page->mapping) {
645 page_cache_release(page);
652 SetPageUptodate(page);
656 ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
657 if (ret == AOP_TRUNCATED_PAGE) {
658 page_cache_release(page);
663 if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) {
664 char *dst = kmap_atomic(page, KM_USER0);
666 memcpy(dst + offset, src + buf->offset, this_len);
667 flush_dcache_page(page);
668 kunmap_atomic(dst, KM_USER0);
671 ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
672 if (ret == AOP_TRUNCATED_PAGE) {
673 page_cache_release(page);
679 * Return the number of bytes written.
682 mark_page_accessed(page);
683 balance_dirty_pages_ratelimited(mapping);
685 if (!(buf->flags & PIPE_BUF_FLAG_STOLEN))
686 page_cache_release(page);
690 buf->ops->unmap(info, buf);
695 * Pipe input worker. Most of this logic works like a regular pipe, the
696 * key here is the 'actor' worker passed in that actually moves the data
697 * to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
699 ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
700 loff_t *ppos, size_t len, unsigned int flags,
703 int ret, do_wakeup, err;
704 struct splice_desc sd;
715 mutex_lock(&pipe->inode->i_mutex);
719 struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
720 struct pipe_buf_operations *ops = buf->ops;
723 if (sd.len > sd.total_len)
724 sd.len = sd.total_len;
726 err = actor(pipe, buf, &sd);
728 if (!ret && err != -ENODATA)
746 ops->release(pipe, buf);
747 pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
761 if (!pipe->waiting_writers) {
766 if (flags & SPLICE_F_NONBLOCK) {
772 if (signal_pending(current)) {
780 if (waitqueue_active(&pipe->wait))
781 wake_up_interruptible_sync(&pipe->wait);
782 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
790 mutex_unlock(&pipe->inode->i_mutex);
794 if (waitqueue_active(&pipe->wait))
795 wake_up_interruptible(&pipe->wait);
796 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
803 * generic_file_splice_write - splice data from a pipe to a file
805 * @out: file to write to
806 * @len: number of bytes to splice
807 * @flags: splice modifier flags
809 * Will either move or copy pages (determined by @flags options) from
810 * the given pipe inode to the given file.
814 generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
815 loff_t *ppos, size_t len, unsigned int flags)
817 struct address_space *mapping = out->f_mapping;
820 ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
822 struct inode *inode = mapping->host;
827 * If file or inode is SYNC and we actually wrote some data,
830 if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
833 mutex_lock(&inode->i_mutex);
834 err = generic_osync_inode(inode, mapping,
835 OSYNC_METADATA|OSYNC_DATA);
836 mutex_unlock(&inode->i_mutex);
846 EXPORT_SYMBOL(generic_file_splice_write);
849 * generic_splice_sendpage - splice data from a pipe to a socket
851 * @out: socket to write to
852 * @len: number of bytes to splice
853 * @flags: splice modifier flags
855 * Will send @len bytes from the pipe to a network socket. No data copying
859 ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
860 loff_t *ppos, size_t len, unsigned int flags)
862 return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
865 EXPORT_SYMBOL(generic_splice_sendpage);
868 * Attempt to initiate a splice from pipe to file.
870 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
871 loff_t *ppos, size_t len, unsigned int flags)
875 if (unlikely(!out->f_op || !out->f_op->splice_write))
878 if (unlikely(!(out->f_mode & FMODE_WRITE)))
881 ret = rw_verify_area(WRITE, out, ppos, len);
882 if (unlikely(ret < 0))
885 return out->f_op->splice_write(pipe, out, ppos, len, flags);
889 * Attempt to initiate a splice from a file to a pipe.
891 static long do_splice_to(struct file *in, loff_t *ppos,
892 struct pipe_inode_info *pipe, size_t len,
898 if (unlikely(!in->f_op || !in->f_op->splice_read))
901 if (unlikely(!(in->f_mode & FMODE_READ)))
904 ret = rw_verify_area(READ, in, ppos, len);
905 if (unlikely(ret < 0))
908 isize = i_size_read(in->f_mapping->host);
909 if (unlikely(*ppos >= isize))
912 left = isize - *ppos;
913 if (unlikely(left < len))
916 return in->f_op->splice_read(in, ppos, pipe, len, flags);
919 long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
920 size_t len, unsigned int flags)
922 struct pipe_inode_info *pipe;
929 * We require the input being a regular file, as we don't want to
930 * randomly drop data for eg socket -> socket splicing. Use the
931 * piped splicing for that!
933 i_mode = in->f_dentry->d_inode->i_mode;
934 if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
938 * neither in nor out is a pipe, setup an internal pipe attached to
939 * 'out' and transfer the wanted data from 'in' to 'out' through that
941 pipe = current->splice_pipe;
942 if (unlikely(!pipe)) {
943 pipe = alloc_pipe_info(NULL);
948 * We don't have an immediate reader, but we'll read the stuff
949 * out of the pipe right after the splice_to_pipe(). So set
950 * PIPE_READERS appropriately.
954 current->splice_pipe = pipe;
965 size_t read_len, max_read_len;
968 * Do at most PIPE_BUFFERS pages worth of transfer:
970 max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE));
972 ret = do_splice_to(in, ppos, pipe, max_read_len, flags);
973 if (unlikely(ret < 0))
979 * NOTE: nonblocking mode only applies to the input. We
980 * must not do the output in nonblocking mode as then we
981 * could get stuck data in the internal pipe:
983 ret = do_splice_from(pipe, out, &out_off, read_len,
984 flags & ~SPLICE_F_NONBLOCK);
985 if (unlikely(ret < 0))
992 * In nonblocking mode, if we got back a short read then
993 * that was due to either an IO error or due to the
994 * pagecache entry not being there. In the IO error case
995 * the _next_ splice attempt will produce a clean IO error
996 * return value (not a short read), so in both cases it's
997 * correct to break out of the loop here:
999 if ((flags & SPLICE_F_NONBLOCK) && (read_len < max_read_len))
1003 pipe->nrbufs = pipe->curbuf = 0;
1009 * If we did an incomplete transfer we must release
1010 * the pipe buffers in question:
1012 for (i = 0; i < PIPE_BUFFERS; i++) {
1013 struct pipe_buffer *buf = pipe->bufs + i;
1016 buf->ops->release(pipe, buf);
1020 pipe->nrbufs = pipe->curbuf = 0;
1023 * If we transferred some data, return the number of bytes:
1031 EXPORT_SYMBOL(do_splice_direct);
1034 * Determine where to splice to/from.
1036 static long do_splice(struct file *in, loff_t __user *off_in,
1037 struct file *out, loff_t __user *off_out,
1038 size_t len, unsigned int flags)
1040 struct pipe_inode_info *pipe;
1041 loff_t offset, *off;
1044 pipe = in->f_dentry->d_inode->i_pipe;
1049 if (out->f_op->llseek == no_llseek)
1051 if (copy_from_user(&offset, off_out, sizeof(loff_t)))
1057 ret = do_splice_from(pipe, out, off, len, flags);
1059 if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
1065 pipe = out->f_dentry->d_inode->i_pipe;
1070 if (in->f_op->llseek == no_llseek)
1072 if (copy_from_user(&offset, off_in, sizeof(loff_t)))
1078 ret = do_splice_to(in, off, pipe, len, flags);
1080 if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
1090 * Map an iov into an array of pages and offset/length tupples. With the
1091 * partial_page structure, we can map several non-contiguous ranges into
1092 * our ones pages[] map instead of splitting that operation into pieces.
1093 * Could easily be exported as a generic helper for other users, in which
1094 * case one would probably want to add a 'max_nr_pages' parameter as well.
1096 static int get_iovec_page_array(const struct iovec __user *iov,
1097 unsigned int nr_vecs, struct page **pages,
1098 struct partial_page *partial)
1100 int buffers = 0, error = 0;
1103 * It's ok to take the mmap_sem for reading, even
1104 * across a "get_user()".
1106 down_read(¤t->mm->mmap_sem);
1109 unsigned long off, npages;
1115 * Get user address base and length for this iovec.
1117 error = get_user(base, &iov->iov_base);
1118 if (unlikely(error))
1120 error = get_user(len, &iov->iov_len);
1121 if (unlikely(error))
1125 * Sanity check this iovec. 0 read succeeds.
1130 if (unlikely(!base))
1134 * Get this base offset and number of pages, then map
1135 * in the user pages.
1137 off = (unsigned long) base & ~PAGE_MASK;
1138 npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
1139 if (npages > PIPE_BUFFERS - buffers)
1140 npages = PIPE_BUFFERS - buffers;
1142 error = get_user_pages(current, current->mm,
1143 (unsigned long) base, npages, 0, 0,
1144 &pages[buffers], NULL);
1146 if (unlikely(error <= 0))
1150 * Fill this contiguous range into the partial page map.
1152 for (i = 0; i < error; i++) {
1153 const int plen = min_t(size_t, len, PAGE_SIZE) - off;
1155 partial[buffers].offset = off;
1156 partial[buffers].len = plen;
1164 * We didn't complete this iov, stop here since it probably
1165 * means we have to move some of this into a pipe to
1166 * be able to continue.
1172 * Don't continue if we mapped fewer pages than we asked for,
1173 * or if we mapped the max number of pages that we have
1176 if (error < npages || buffers == PIPE_BUFFERS)
1183 up_read(¤t->mm->mmap_sem);
1192 * vmsplice splices a user address range into a pipe. It can be thought of
1193 * as splice-from-memory, where the regular splice is splice-from-file (or
1194 * to file). In both cases the output is a pipe, naturally.
1196 * Note that vmsplice only supports splicing _from_ user memory to a pipe,
1197 * not the other way around. Splicing from user memory is a simple operation
1198 * that can be supported without any funky alignment restrictions or nasty
1199 * vm tricks. We simply map in the user memory and fill them into a pipe.
1200 * The reverse isn't quite as easy, though. There are two possible solutions
1203 * - memcpy() the data internally, at which point we might as well just
1204 * do a regular read() on the buffer anyway.
1205 * - Lots of nasty vm tricks, that are neither fast nor flexible (it
1206 * has restriction limitations on both ends of the pipe).
1208 * Alas, it isn't here.
1211 static long do_vmsplice(struct file *file, const struct iovec __user *iov,
1212 unsigned long nr_segs, unsigned int flags)
1214 struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe;
1215 struct page *pages[PIPE_BUFFERS];
1216 struct partial_page partial[PIPE_BUFFERS];
1217 struct splice_pipe_desc spd = {
1221 .ops = &user_page_pipe_buf_ops,
1224 if (unlikely(!pipe))
1226 if (unlikely(nr_segs > UIO_MAXIOV))
1228 else if (unlikely(!nr_segs))
1231 spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial);
1232 if (spd.nr_pages <= 0)
1233 return spd.nr_pages;
1235 return splice_to_pipe(pipe, &spd);
1238 asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
1239 unsigned long nr_segs, unsigned int flags)
1246 file = fget_light(fd, &fput);
1248 if (file->f_mode & FMODE_WRITE)
1249 error = do_vmsplice(file, iov, nr_segs, flags);
1251 fput_light(file, fput);
1257 asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
1258 int fd_out, loff_t __user *off_out,
1259 size_t len, unsigned int flags)
1262 struct file *in, *out;
1263 int fput_in, fput_out;
1269 in = fget_light(fd_in, &fput_in);
1271 if (in->f_mode & FMODE_READ) {
1272 out = fget_light(fd_out, &fput_out);
1274 if (out->f_mode & FMODE_WRITE)
1275 error = do_splice(in, off_in,
1278 fput_light(out, fput_out);
1282 fput_light(in, fput_in);
1289 * Link contents of ipipe to opipe.
1291 static int link_pipe(struct pipe_inode_info *ipipe,
1292 struct pipe_inode_info *opipe,
1293 size_t len, unsigned int flags)
1295 struct pipe_buffer *ibuf, *obuf;
1296 int ret, do_wakeup, i, ipipe_first;
1298 ret = do_wakeup = ipipe_first = 0;
1301 * Potential ABBA deadlock, work around it by ordering lock
1302 * grabbing by inode address. Otherwise two different processes
1303 * could deadlock (one doing tee from A -> B, the other from B -> A).
1305 if (ipipe->inode < opipe->inode) {
1307 mutex_lock(&ipipe->inode->i_mutex);
1308 mutex_lock(&opipe->inode->i_mutex);
1310 mutex_lock(&opipe->inode->i_mutex);
1311 mutex_lock(&ipipe->inode->i_mutex);
1315 if (!opipe->readers) {
1316 send_sig(SIGPIPE, current, 0);
1321 if (ipipe->nrbufs - i) {
1322 ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
1325 * If we have room, fill this buffer
1327 if (opipe->nrbufs < PIPE_BUFFERS) {
1328 int nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
1331 * Get a reference to this pipe buffer,
1332 * so we can copy the contents over.
1334 ibuf->ops->get(ipipe, ibuf);
1336 obuf = opipe->bufs + nbuf;
1339 if (obuf->len > len)
1349 if (opipe->nrbufs < PIPE_BUFFERS)
1354 * We have input available, but no output room.
1355 * If we already copied data, return that. If we
1356 * need to drop the opipe lock, it must be ordered
1357 * last to avoid deadlocks.
1359 if ((flags & SPLICE_F_NONBLOCK) || !ipipe_first) {
1364 if (signal_pending(current)) {
1371 if (waitqueue_active(&opipe->wait))
1372 wake_up_interruptible(&opipe->wait);
1373 kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
1377 opipe->waiting_writers++;
1379 opipe->waiting_writers--;
1384 * No input buffers, do the usual checks for available
1385 * writers and blocking and wait if necessary
1387 if (!ipipe->writers)
1389 if (!ipipe->waiting_writers) {
1394 * pipe_wait() drops the ipipe mutex. To avoid deadlocks
1395 * with another process, we can only safely do that if
1396 * the ipipe lock is ordered last.
1398 if ((flags & SPLICE_F_NONBLOCK) || ipipe_first) {
1403 if (signal_pending(current)) {
1409 if (waitqueue_active(&ipipe->wait))
1410 wake_up_interruptible_sync(&ipipe->wait);
1411 kill_fasync(&ipipe->fasync_writers, SIGIO, POLL_OUT);
1416 mutex_unlock(&ipipe->inode->i_mutex);
1417 mutex_unlock(&opipe->inode->i_mutex);
1421 if (waitqueue_active(&opipe->wait))
1422 wake_up_interruptible(&opipe->wait);
1423 kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
1430 * This is a tee(1) implementation that works on pipes. It doesn't copy
1431 * any data, it simply references the 'in' pages on the 'out' pipe.
1432 * The 'flags' used are the SPLICE_F_* variants, currently the only
1433 * applicable one is SPLICE_F_NONBLOCK.
1435 static long do_tee(struct file *in, struct file *out, size_t len,
1438 struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
1439 struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
1442 * Link ipipe to the two output pipes, consuming as we go along.
1445 return link_pipe(ipipe, opipe, len, flags);
1450 asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
1459 in = fget_light(fdin, &fput_in);
1461 if (in->f_mode & FMODE_READ) {
1463 struct file *out = fget_light(fdout, &fput_out);
1466 if (out->f_mode & FMODE_WRITE)
1467 error = do_tee(in, out, len, flags);
1468 fput_light(out, fput_out);
1471 fput_light(in, fput_in);