include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_E500                     /* BOOKE e500 family */
  17 #include <asm/config_mpc85xx.h>
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20
  21 #ifndef CONFIG_SECURE_BOOT
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  23 #else
  24 #define CONFIG_SYS_FSL_PBL_PBI \
  25                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  26 #endif
  27
  28 #ifdef CONFIG_T1040RDB
  29 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  30 #endif
  31 #ifdef CONFIG_T1042RDB_PI
  32 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  33 #endif
  34 #ifdef CONFIG_T1042RDB
  35 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  36 #endif
  37 #ifdef CONFIG_T1040D4RDB
  38 #define CONFIG_SYS_FSL_PBL_RCW \
  39 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
  40 #endif
  41 #ifdef CONFIG_T1042D4RDB
  42 #define CONFIG_SYS_FSL_PBL_RCW \
  43 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  44 #endif
  45
  46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  47 #define CONFIG_SPL_SERIAL_SUPPORT
  48 #define CONFIG_SPL_FLUSH_IMAGE
  49 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  50 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  51 #define CONFIG_SYS_TEXT_BASE            0x30001000
  52 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  53 #define CONFIG_SPL_PAD_TO               0x40000
  54 #define CONFIG_SPL_MAX_SIZE             0x28000
  55 #ifdef CONFIG_SPL_BUILD
  56 #define CONFIG_SPL_SKIP_RELOCATE
  57 #define CONFIG_SPL_COMMON_INIT_DDR
  58 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  59 #define CONFIG_SYS_NO_FLASH
  60 #endif
  61 #define RESET_VECTOR_OFFSET             0x27FFC
  62 #define BOOT_PAGE_OFFSET                0x27000
  63
  64 #ifdef CONFIG_NAND
  65 #define CONFIG_SPL_NAND_SUPPORT
  66 #ifdef CONFIG_SECURE_BOOT
  67 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  68 /*
  69  * HDR would be appended at end of image and copied to DDR along
  70  * with U-Boot image.
  71  */
  72 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  73                                          CONFIG_U_BOOT_HDR_SIZE)
  74 #else
  75 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  76 #endif
  77 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  78 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  79 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  80 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  81 #define CONFIG_SPL_NAND_BOOT
  82 #endif
  83
  84 #ifdef CONFIG_SPIFLASH
  85 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  86 #define CONFIG_SPL_SPI_SUPPORT
  87 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  88 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  89 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  90 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  93 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  94 #ifndef CONFIG_SPL_BUILD
  95 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  96 #endif
  97 #define CONFIG_SPL_SPI_BOOT
  98 #endif
  99
 100 #ifdef CONFIG_SDCARD
 101 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 102 #define CONFIG_SPL_MMC_MINIMAL
 103 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 104 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 105 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 106 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 107 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 108 #ifndef CONFIG_SPL_BUILD
 109 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 110 #endif
 111 #define CONFIG_SPL_MMC_BOOT
 112 #endif
 113
 114 #endif
 115
 116 /* High Level Configuration Options */
 117 #define CONFIG_BOOKE
 118 #define CONFIG_E500MC                   /* BOOKE e500mc family */
 119 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 120 #define CONFIG_MP                       /* support multiple processors */
 121
 122 /* support deep sleep */
 123 #define CONFIG_DEEP_SLEEP
 124 #if defined(CONFIG_DEEP_SLEEP)
 125 #define CONFIG_BOARD_EARLY_INIT_F
 126 #define CONFIG_SILENT_CONSOLE
 127 #endif
 128
 129 #ifndef CONFIG_SYS_TEXT_BASE
 130 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 131 #endif
 132
 133 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 134 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 135 #endif
 136
 137 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 138 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 139 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 140 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 141 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 142 #define CONFIG_PCI_INDIRECT_BRIDGE
 143 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 144 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 145 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 146 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 147
 148 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 149 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 150
 151 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 152
 153 #define CONFIG_ENV_OVERWRITE
 154
 155 #ifndef CONFIG_SYS_NO_FLASH
 156 #define CONFIG_FLASH_CFI_DRIVER
 157 #define CONFIG_SYS_FLASH_CFI
 158 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 159 #endif
 160
 161 #if defined(CONFIG_SPIFLASH)
 162 #define CONFIG_SYS_EXTRA_ENV_RELOC
 163 #define CONFIG_ENV_IS_IN_SPI_FLASH
 164 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 165 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 166 #define CONFIG_ENV_SECT_SIZE            0x10000
 167 #elif defined(CONFIG_SDCARD)
 168 #define CONFIG_SYS_EXTRA_ENV_RELOC
 169 #define CONFIG_ENV_IS_IN_MMC
 170 #define CONFIG_SYS_MMC_ENV_DEV          0
 171 #define CONFIG_ENV_SIZE                 0x2000
 172 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 173 #elif defined(CONFIG_NAND)
 174 #ifdef CONFIG_SECURE_BOOT
 175 #define CONFIG_RAMBOOT_NAND
 176 #define CONFIG_BOOTSCRIPT_COPY_RAM
 177 #endif
 178 #define CONFIG_SYS_EXTRA_ENV_RELOC
 179 #define CONFIG_ENV_IS_IN_NAND
 180 #define CONFIG_ENV_SIZE                 0x2000
 181 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 182 #else
 183 #define CONFIG_ENV_IS_IN_FLASH
 184 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 185 #define CONFIG_ENV_SIZE         0x2000
 186 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 187 #endif
 188
 189 #define CONFIG_SYS_CLK_FREQ     100000000
 190 #define CONFIG_DDR_CLK_FREQ     66666666
 191
 192 /*
 193  * These can be toggled for performance analysis, otherwise use default.
 194  */
 195 #define CONFIG_SYS_CACHE_STASHING
 196 #define CONFIG_BACKSIDE_L2_CACHE
 197 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 198 #define CONFIG_BTB                      /* toggle branch predition */
 199 #define CONFIG_DDR_ECC
 200 #ifdef CONFIG_DDR_ECC
 201 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 202 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 203 #endif
 204
 205 #define CONFIG_ENABLE_36BIT_PHYS
 206
 207 #define CONFIG_ADDR_MAP
 208 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 209
 210 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 211 #define CONFIG_SYS_MEMTEST_END          0x00400000
 212 #define CONFIG_SYS_ALT_MEMTEST
 213 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 214
 215 /*
 216  *  Config the L3 Cache as L3 SRAM
 217  */
 218 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 219 /*
 220  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 221  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 222  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 223  */
 224 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 225 #define CONFIG_SYS_L3_SIZE              256 << 10
 226 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 227 #ifdef CONFIG_RAMBOOT_PBL
 228 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 229 #endif
 230 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 231 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 232 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 233 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 234
 235 #define CONFIG_SYS_DCSRBAR              0xf0000000
 236 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 237
 238 /*
 239  * DDR Setup
 240  */
 241 #define CONFIG_VERY_BIG_RAM
 242 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 243 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 244
 245 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 246 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 247 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 248
 249 #define CONFIG_DDR_SPD
 250 #ifndef CONFIG_SYS_FSL_DDR4
 251 #define CONFIG_SYS_FSL_DDR3
 252 #endif
 253
 254 #define CONFIG_SYS_SPD_BUS_NUM  0
 255 #define SPD_EEPROM_ADDRESS      0x51
 256
 257 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 258
 259 /*
 260  * IFC Definitions
 261  */
 262 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 263 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 264
 265 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 266 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 267                                 CSPR_PORT_SIZE_16 | \
 268                                 CSPR_MSEL_NOR | \
 269                                 CSPR_V)
 270 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 271
 272 /*
 273  * TDM Definition
 274  */
 275 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 276
 277 /* NOR Flash Timing Params */
 278 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 279 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 280                                 FTIM0_NOR_TEADC(0x5) | \
 281                                 FTIM0_NOR_TEAHC(0x5))
 282 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 283                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 284                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 285 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 286                                 FTIM2_NOR_TCH(0x4) | \
 287                                 FTIM2_NOR_TWPH(0x0E) | \
 288                                 FTIM2_NOR_TWP(0x1c))
 289 #define CONFIG_SYS_NOR_FTIM3    0x0
 290
 291 #define CONFIG_SYS_FLASH_QUIET_TEST
 292 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 293
 294 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 295 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 296 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 297 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 298
 299 #define CONFIG_SYS_FLASH_EMPTY_INFO
 300 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 301
 302 /* CPLD on IFC */
 303 #define CPLD_LBMAP_MASK                 0x3F
 304 #define CPLD_BANK_SEL_MASK              0x07
 305 #define CPLD_BANK_OVERRIDE              0x40
 306 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 307 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 308 #define CPLD_LBMAP_RESET                0xFF
 309 #define CPLD_LBMAP_SHIFT                0x03
 310
 311 #if defined(CONFIG_T1042RDB_PI)
 312 #define CPLD_DIU_SEL_DFP                0x80
 313 #elif defined(CONFIG_T1042D4RDB)
 314 #define CPLD_DIU_SEL_DFP                0xc0
 315 #endif
 316
 317 #if defined(CONFIG_T1040D4RDB)
 318 #define CPLD_INT_MASK_ALL               0xFF
 319 #define CPLD_INT_MASK_THERM             0x80
 320 #define CPLD_INT_MASK_DVI_DFP           0x40
 321 #define CPLD_INT_MASK_QSGMII1           0x20
 322 #define CPLD_INT_MASK_QSGMII2           0x10
 323 #define CPLD_INT_MASK_SGMI1             0x08
 324 #define CPLD_INT_MASK_SGMI2             0x04
 325 #define CPLD_INT_MASK_TDMR1             0x02
 326 #define CPLD_INT_MASK_TDMR2             0x01
 327 #endif
 328
 329 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 330 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 331 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 332 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 333                                 | CSPR_PORT_SIZE_8 \
 334                                 | CSPR_MSEL_GPCM \
 335                                 | CSPR_V)
 336 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 337 #define CONFIG_SYS_CSOR2        0x0
 338 /* CPLD Timing parameters for IFC CS2 */
 339 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 340                                         FTIM0_GPCM_TEADC(0x0e) | \
 341                                         FTIM0_GPCM_TEAHC(0x0e))
 342 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 343                                         FTIM1_GPCM_TRAD(0x1f))
 344 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 345                                         FTIM2_GPCM_TCH(0x8) | \
 346                                         FTIM2_GPCM_TWP(0x1f))
 347 #define CONFIG_SYS_CS2_FTIM3            0x0
 348
 349 /* NAND Flash on IFC */
 350 #define CONFIG_NAND_FSL_IFC
 351 #define CONFIG_SYS_NAND_BASE            0xff800000
 352 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 353
 354 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 355 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 356                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 357                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 358                                 | CSPR_V)
 359 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 360
 361 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 362                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 363                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 364                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 365                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 366                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 367                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 368
 369 #define CONFIG_SYS_NAND_ONFI_DETECTION
 370
 371 /* ONFI NAND Flash mode0 Timing Params */
 372 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 373                                         FTIM0_NAND_TWP(0x18)   | \
 374                                         FTIM0_NAND_TWCHT(0x07) | \
 375                                         FTIM0_NAND_TWH(0x0a))
 376 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 377                                         FTIM1_NAND_TWBE(0x39)  | \
 378                                         FTIM1_NAND_TRR(0x0e)   | \
 379                                         FTIM1_NAND_TRP(0x18))
 380 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 381                                         FTIM2_NAND_TREH(0x0a) | \
 382                                         FTIM2_NAND_TWHRE(0x1e))
 383 #define CONFIG_SYS_NAND_FTIM3           0x0
 384
 385 #define CONFIG_SYS_NAND_DDR_LAW         11
 386 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 387 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 388 #define CONFIG_CMD_NAND
 389
 390 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 391
 392 #if defined(CONFIG_NAND)
 393 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 394 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 395 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 396 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 397 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 398 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 399 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 400 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 401 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 402 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 403 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 404 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 405 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 406 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 407 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 408 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 409 #else
 410 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 411 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 412 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 413 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 414 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 415 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 416 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 417 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 418 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 419 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 420 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 421 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 422 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 423 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 424 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 425 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 426 #endif
 427
 428 #ifdef CONFIG_SPL_BUILD
 429 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 430 #else
 431 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 432 #endif
 433
 434 #if defined(CONFIG_RAMBOOT_PBL)
 435 #define CONFIG_SYS_RAMBOOT
 436 #endif
 437
 438 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 439 #if defined(CONFIG_NAND)
 440 #define CONFIG_A008044_WORKAROUND
 441 #endif
 442 #endif
 443
 444 #define CONFIG_BOARD_EARLY_INIT_R
 445 #define CONFIG_MISC_INIT_R
 446
 447 #define CONFIG_HWCONFIG
 448
 449 /* define to use L1 as initial stack */
 450 #define CONFIG_L1_INIT_RAM
 451 #define CONFIG_SYS_INIT_RAM_LOCK
 452 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 454 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 455 /* The assembler doesn't like typecast */
 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 457         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 458           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 459 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 460
 461 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 462                                         GENERATED_GBL_DATA_SIZE)
 463 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 464
 465 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 466 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 467
 468 /* Serial Port - controlled on board with jumper J8
 469  * open - index 2
 470  * shorted - index 1
 471  */
 472 #define CONFIG_CONS_INDEX       1
 473 #define CONFIG_SYS_NS16550_SERIAL
 474 #define CONFIG_SYS_NS16550_REG_SIZE     1
 475 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 476
 477 #define CONFIG_SYS_BAUDRATE_TABLE       \
 478         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 479
 480 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 481 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 482 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 483 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 484 #ifndef CONFIG_SPL_BUILD
 485 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 486 #endif
 487
 488 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 489 /* Video */
 490 #define CONFIG_FSL_DIU_FB
 491
 492 #ifdef CONFIG_FSL_DIU_FB
 493 #define CONFIG_FSL_DIU_CH7301
 494 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 495 #define CONFIG_VIDEO
 496 #define CONFIG_CMD_BMP
 497 #define CONFIG_CFB_CONSOLE
 498 #define CONFIG_CFB_CONSOLE_ANSI
 499 #define CONFIG_VIDEO_SW_CURSOR
 500 #define CONFIG_VGA_AS_SINGLE_DEVICE
 501 #define CONFIG_VIDEO_LOGO
 502 #define CONFIG_VIDEO_BMP_LOGO
 503 #endif
 504 #endif
 505
 506 /* I2C */
 507 #define CONFIG_SYS_I2C
 508 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 509 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 510 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 511 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 512 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 513 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 514 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 515 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 516 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 517 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 518 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 519 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 520 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 521
 522 /* I2C bus multiplexer */
 523 #define I2C_MUX_PCA_ADDR                0x70
 524 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 525 #define I2C_MUX_CH_DEFAULT      0x8
 526 #endif
 527
 528 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
 529 /* LDI/DVI Encoder for display */
 530 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 531 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 532
 533 /*
 534  * RTC configuration
 535  */
 536 #define RTC
 537 #define CONFIG_RTC_DS1337               1
 538 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 539
 540 /*DVI encoder*/
 541 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 542 #endif
 543
 544 /*
 545  * eSPI - Enhanced SPI
 546  */
 547 #define CONFIG_SPI_FLASH_BAR
 548 #define CONFIG_SF_DEFAULT_SPEED         10000000
 549 #define CONFIG_SF_DEFAULT_MODE          0
 550 #define CONFIG_ENV_SPI_BUS              0
 551 #define CONFIG_ENV_SPI_CS               0
 552 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 553 #define CONFIG_ENV_SPI_MODE             0
 554
 555 /*
 556  * General PCI
 557  * Memory space is mapped 1-1, but I/O space must start from 0.
 558  */
 559
 560 #ifdef CONFIG_PCI
 561 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 562 #ifdef CONFIG_PCIE1
 563 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 564 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 566 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 567 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 568 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 569 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 570 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 571 #endif
 572
 573 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 574 #ifdef CONFIG_PCIE2
 575 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 576 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 577 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 578 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 579 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 580 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 581 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 582 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 583 #endif
 584
 585 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 586 #ifdef CONFIG_PCIE3
 587 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 588 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 589 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 590 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 591 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 592 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 593 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 594 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 595 #endif
 596
 597 /* controller 4, Base address 203000 */
 598 #ifdef CONFIG_PCIE4
 599 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 600 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 601 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 602 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 603 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 604 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 605 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 606 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 607 #endif
 608
 609 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 610
 611 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 612 #define CONFIG_DOS_PARTITION
 613 #endif  /* CONFIG_PCI */
 614
 615 /* SATA */
 616 #define CONFIG_FSL_SATA_V2
 617 #ifdef CONFIG_FSL_SATA_V2
 618 #define CONFIG_LIBATA
 619 #define CONFIG_FSL_SATA
 620
 621 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 622 #define CONFIG_SATA1
 623 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 624 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 625
 626 #define CONFIG_LBA48
 627 #define CONFIG_CMD_SATA
 628 #define CONFIG_DOS_PARTITION
 629 #endif
 630
 631 /*
 632 * USB
 633 */
 634 #define CONFIG_HAS_FSL_DR_USB
 635
 636 #ifdef CONFIG_HAS_FSL_DR_USB
 637 #define CONFIG_USB_EHCI
 638
 639 #ifdef CONFIG_USB_EHCI
 640 #define CONFIG_USB_EHCI_FSL
 641 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 642 #endif
 643 #endif
 644
 645 #define CONFIG_MMC
 646
 647 #ifdef CONFIG_MMC
 648 #define CONFIG_FSL_ESDHC
 649 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 650 #define CONFIG_GENERIC_MMC
 651 #define CONFIG_DOS_PARTITION
 652 #endif
 653
 654 /* Qman/Bman */
 655 #ifndef CONFIG_NOBQFMAN
 656 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 657 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 658 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 659 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 660 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 661 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 662 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 663 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 664 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 665 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 666                                         CONFIG_SYS_BMAN_CENA_SIZE)
 667 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 668 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 669 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 670 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 671 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 672 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 673 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 674 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 675 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 676 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 677 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 678                                         CONFIG_SYS_QMAN_CENA_SIZE)
 679 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 680 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 681
 682 #define CONFIG_SYS_DPAA_FMAN
 683 #define CONFIG_SYS_DPAA_PME
 684
 685 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 686 #define CONFIG_QE
 687 #define CONFIG_U_QE
 688 #endif
 689
 690 /* Default address of microcode for the Linux Fman driver */
 691 #if defined(CONFIG_SPIFLASH)
 692 /*
 693  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 694  * env, so we got 0x110000.
 695  */
 696 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 697 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 698 #elif defined(CONFIG_SDCARD)
 699 /*
 700  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 701  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 702  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 703  */
 704 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 705 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 706 #elif defined(CONFIG_NAND)
 707 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 708 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 709 #else
 710 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 711 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 712 #endif
 713
 714 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 715 #if defined(CONFIG_SPIFLASH)
 716 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 717 #elif defined(CONFIG_SDCARD)
 718 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 719 #elif defined(CONFIG_NAND)
 720 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 721 #else
 722 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 723 #endif
 724 #endif
 725
 726 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 727 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 728 #endif /* CONFIG_NOBQFMAN */
 729
 730 #ifdef CONFIG_SYS_DPAA_FMAN
 731 #define CONFIG_FMAN_ENET
 732 #define CONFIG_PHY_VITESSE
 733 #define CONFIG_PHY_REALTEK
 734 #endif
 735
 736 #ifdef CONFIG_FMAN_ENET
 737 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 738 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 739 #elif defined(CONFIG_T1040D4RDB)
 740 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 741 #elif defined(CONFIG_T1042D4RDB)
 742 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 743 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 744 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 745 #endif
 746
 747 #ifdef CONFIG_T104XD4RDB
 748 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 749 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 750 #else
 751 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 752 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 753 #endif
 754
 755 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 756 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 757 #define CONFIG_VSC9953
 758 #define CONFIG_CMD_ETHSW
 759 #ifdef CONFIG_T1040RDB
 760 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 761 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 762 #else
 763 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 764 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 765 #endif
 766 #endif
 767
 768 #define CONFIG_MII              /* MII PHY management */
 769 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 770 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 771 #endif
 772
 773 /*
 774  * Environment
 775  */
 776 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 777 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 778
 779 /*
 780  * Command line configuration.
 781  */
 782 #ifdef CONFIG_T1042RDB_PI
 783 #define CONFIG_CMD_DATE
 784 #endif
 785 #define CONFIG_CMD_ERRATA
 786 #define CONFIG_CMD_IRQ
 787 #define CONFIG_CMD_REGINFO
 788
 789 #ifdef CONFIG_PCI
 790 #define CONFIG_CMD_PCI
 791 #endif
 792
 793 /* Hash command with SHA acceleration supported in hardware */
 794 #ifdef CONFIG_FSL_CAAM
 795 #define CONFIG_CMD_HASH
 796 #define CONFIG_SHA_HW_ACCEL
 797 #endif
 798
 799 /*
 800  * Miscellaneous configurable options
 801  */
 802 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 803 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 804 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 805 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 806 #ifdef CONFIG_CMD_KGDB
 807 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 808 #else
 809 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 810 #endif
 811 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 812 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 813 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 814
 815 /*
 816  * For booting Linux, the board info and command line data
 817  * have to be in the first 64 MB of memory, since this is
 818  * the maximum mapped by the Linux kernel during initialization.
 819  */
 820 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 821 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 822
 823 #ifdef CONFIG_CMD_KGDB
 824 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 825 #endif
 826
 827 /*
 828  * Dynamic MTD Partition support with mtdparts
 829  */
 830 #ifndef CONFIG_SYS_NO_FLASH
 831 #define CONFIG_MTD_DEVICE
 832 #define CONFIG_MTD_PARTITIONS
 833 #define CONFIG_CMD_MTDPARTS
 834 #define CONFIG_FLASH_CFI_MTD
 835 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 836                         "spi0=spife110000.0"
 837 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 838                                 "128k(dtb),96m(fs),-(user);"\
 839                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 840                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 841                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 842 #endif
 843
 844 /*
 845  * Environment Configuration
 846  */
 847 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 848 #define CONFIG_BOOTFILE         "uImage"
 849 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 850
 851 /* default location for tftp and bootm */
 852 #define CONFIG_LOADADDR         1000000
 853
 854
 855 #define CONFIG_BAUDRATE 115200
 856
 857 #define __USB_PHY_TYPE  utmi
 858 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 859
 860 #ifdef CONFIG_T1040RDB
 861 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 862 #elif defined(CONFIG_T1042RDB_PI)
 863 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 864 #elif defined(CONFIG_T1042RDB)
 865 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 866 #elif defined(CONFIG_T1040D4RDB)
 867 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 868 #elif defined(CONFIG_T1042D4RDB)
 869 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 870 #endif
 871
 872 #ifdef CONFIG_FSL_DIU_FB
 873 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 874 #else
 875 #define DIU_ENVIRONMENT
 876 #endif
 877
 878 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 879         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 880         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 881         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 882         "netdev=eth0\0"                                         \
 883         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 884         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 885         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 886         "tftpflash=tftpboot $loadaddr $uboot && "               \
 887         "protect off $ubootaddr +$filesize && "                 \
 888         "erase $ubootaddr +$filesize && "                       \
 889         "cp.b $loadaddr $ubootaddr $filesize && "               \
 890         "protect on $ubootaddr +$filesize && "                  \
 891         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 892         "consoledev=ttyS0\0"                                    \
 893         "ramdiskaddr=2000000\0"                                 \
 894         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 895         "fdtaddr=1e00000\0"                                     \
 896         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 897         "bdev=sda3\0"
 898
 899 #define CONFIG_LINUX                       \
 900         "setenv bootargs root=/dev/ram rw "            \
 901         "console=$consoledev,$baudrate $othbootargs;"  \
 902         "setenv ramdiskaddr 0x02000000;"               \
 903         "setenv fdtaddr 0x00c00000;"                   \
 904         "setenv loadaddr 0x1000000;"                   \
 905         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 906
 907 #define CONFIG_HDBOOT                                   \
 908         "setenv bootargs root=/dev/$bdev rw "           \
 909         "console=$consoledev,$baudrate $othbootargs;"   \
 910         "tftp $loadaddr $bootfile;"                     \
 911         "tftp $fdtaddr $fdtfile;"                       \
 912         "bootm $loadaddr - $fdtaddr"
 913
 914 #define CONFIG_NFSBOOTCOMMAND                   \
 915         "setenv bootargs root=/dev/nfs rw "     \
 916         "nfsroot=$serverip:$rootpath "          \
 917         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 918         "console=$consoledev,$baudrate $othbootargs;"   \
 919         "tftp $loadaddr $bootfile;"             \
 920         "tftp $fdtaddr $fdtfile;"               \
 921         "bootm $loadaddr - $fdtaddr"
 922
 923 #define CONFIG_RAMBOOTCOMMAND                           \
 924         "setenv bootargs root=/dev/ram rw "             \
 925         "console=$consoledev,$baudrate $othbootargs;"   \
 926         "tftp $ramdiskaddr $ramdiskfile;"               \
 927         "tftp $loadaddr $bootfile;"                     \
 928         "tftp $fdtaddr $fdtfile;"                       \
 929         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 930
 931 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 932
 933 #include <asm/fsl_secure_boot.h>
 934
 935 #endif  /* __CONFIG_H */