include/configs/cgtqmx6eval.h

   1 /*
   2  *
   3  * Congatec Conga-QEVAl board configuration file.
   4  *
   5  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   6  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   7  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   8  * Leo Sartre, <lsartre@adeneo-embedded.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_CGTQMX6EVAL_H
  14 #define __CONFIG_CGTQMX6EVAL_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4122
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_MISC_INIT_R
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE           UART2_BASE
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 /* Miscellaneous commands */
  33 #define CONFIG_CMD_BMODE
  34
  35 /* Thermal support */
  36 #define CONFIG_IMX6_THERMAL
  37
  38 #define CONFIG_CMD_FUSE
  39 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  40 #define CONFIG_MXC_OCOTP
  41 #endif
  42
  43 /* I2C Configs */
  44 #define CONFIG_CMD_I2C
  45 #define CONFIG_SYS_I2C
  46 #define CONFIG_SYS_I2C_MXC
  47 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  48 #define CONFIG_SYS_I2C_SPEED              100000
  49
  50 /* PMIC */
  51 #define CONFIG_POWER
  52 #define CONFIG_POWER_I2C
  53 #define CONFIG_POWER_PFUZE100
  54 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  55
  56 /* USB Configs */
  57 #define CONFIG_CMD_USB
  58 #define CONFIG_CMD_FAT
  59 #define CONFIG_USB_EHCI
  60 #define CONFIG_USB_EHCI_MX6
  61 #define CONFIG_USB_STORAGE
  62 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  63 #define CONFIG_USB_HOST_ETHER
  64 #define CONFIG_USB_ETHER_ASIX
  65 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  66 #define CONFIG_MXC_USB_FLAGS    0
  67 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
  68 #define CONFIG_USB_KEYBOARD
  69 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  70
  71 /* Framebuffer */
  72 #define CONFIG_VIDEO
  73 #define CONFIG_VIDEO_IPUV3
  74 #define CONFIG_CFB_CONSOLE
  75 #define CONFIG_VGA_AS_SINGLE_DEVICE
  76 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  77 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  78 #define CONFIG_VIDEO_BMP_RLE8
  79 #define CONFIG_SPLASH_SCREEN
  80 #define CONFIG_SPLASH_SCREEN_ALIGN
  81 #define CONFIG_BMP_16BPP
  82 #define CONFIG_VIDEO_LOGO
  83 #define CONFIG_VIDEO_BMP_LOGO
  84 #ifdef CONFIG_MX6DL
  85 #define CONFIG_IPUV3_CLK 198000000
  86 #else
  87 #define CONFIG_IPUV3_CLK 264000000
  88 #endif
  89 #define CONFIG_IMX_HDMI
  90
  91 #define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb"
  92
  93 #define CONFIG_EXTRA_ENV_SETTINGS \
  94         "script=boot.scr\0" \
  95         "image=zImage\0" \
  96         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  97         "boot_dir=/boot\0" \
  98         "console=ttymxc1\0" \
  99         "fdt_high=0xffffffff\0" \
 100         "initrd_high=0xffffffff\0" \
 101         "fdt_addr=0x18000000\0" \
 102         "boot_fdt=try\0" \
 103         "mmcdev=1\0" \
 104         "mmcpart=1\0" \
 105         "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
 106         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 107                 "root=${mmcroot}\0" \
 108         "loadbootscript=" \
 109                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 110         "bootscript=echo Running bootscript from mmc ...; " \
 111                 "source\0" \
 112         "loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 113                 "${boot_dir}/${image}\0" \
 114         "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
 115                 "${boot_dir}/${fdt_file}\0" \
 116         "mmcboot=echo Booting from mmc ...; " \
 117                 "run mmcargs; " \
 118                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 119                         "if run loadfdt; then " \
 120                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 121                         "else " \
 122                                 "if test ${boot_fdt} = try; then " \
 123                                         "bootz; " \
 124                                 "else " \
 125                                         "echo WARN: Cannot load the DT; " \
 126                                 "fi; " \
 127                         "fi; " \
 128                 "else " \
 129                         "bootz; " \
 130                 "fi;\0"
 131
 132 #define CONFIG_BOOTCOMMAND \
 133            "mmc dev ${mmcdev};" \
 134            "mmc dev ${mmcdev}; if mmc rescan; then " \
 135                    "if run loadbootscript; then " \
 136                            "run bootscript; " \
 137                    "else " \
 138                            "if run loadimage; then " \
 139                                    "run mmcboot; " \
 140                            "else "\
 141                                    "echo ERR: Fail to boot from mmc; " \
 142                            "fi; " \
 143                    "fi; " \
 144            "else echo ERR: Fail to boot from mmc; fi"
 145
 146 #define CONFIG_SYS_MEMTEST_START       0x10000000
 147 #define CONFIG_SYS_MEMTEST_END         0x10010000
 148 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 149
 150 /* Physical Memory Map */
 151 #define CONFIG_NR_DRAM_BANKS           1
 152 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 153 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 154
 155 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 156 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 157 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 158
 159 #define CONFIG_SYS_INIT_SP_OFFSET \
 160         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 161 #define CONFIG_SYS_INIT_SP_ADDR \
 162         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 163
 164 /* Environment organization */
 165 #define CONFIG_ENV_SIZE                 (8 * 1024)
 166
 167 #define CONFIG_ENV_IS_IN_MMC
 168
 169 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 170 #define CONFIG_SYS_MMC_ENV_DEV          0
 171
 172 #endif                         /* __CONFIG_CGTQMX6EVAL_H */