]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - include/configs/charon.h
karo: tx53: enable 'gpio' command
[karo-tx-uboot.git] / include / configs / charon.h
1 /*
2  * (C) Copyright 2003-2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * (C) Copyright 2004-2006
6  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
7  *
8  * (C) Copyright 2010
9  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_CHARON_H
15 #define __CONFIG_CHARON_H
16
17 #define CONFIG_CHARON
18 #define CONFIG_HOSTNAME         charon
19
20 #define CONFIG_SYS_GPS_PORT_CONFIG      0x81550414
21
22 /* include common defines/options for TQM52xx boards */
23 #include "TQM5200.h"
24
25 /* defines special on charon board */
26 #undef CONFIG_RTC_MPC5200
27 #undef CONFIG_CMD_DATE
28
29 #undef CUSTOM_ENV_SETTINGS
30 #define CUSTOM_ENV_SETTINGS                                     \
31         "bootfile=/tftpboot/charon/uImage\0"                    \
32         "fdt_file=/tftpboot/charon/charon.dtb\0"                \
33         "u-boot=/tftpboot/charon/u-boot.bin\0"                  \
34         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
35         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"
36
37
38 /* additional features on charon board */
39 #define CONFIG_RESET_PHY_R
40
41 /*
42  * I2C configuration
43  */
44 #define CONFIG_I2C_MULTI_BUS
45
46 #define CONFIG_SYS_TFP410_ADDR  0x38
47 #define CONFIG_SYS_TFP410_BUS   0
48
49 /*
50  * FPGA configuration
51  */
52 #define CONFIG_SYS_CS3_START            0xE8000000
53 #define CONFIG_SYS_CS3_SIZE             0x80000 /* 512 KByte */
54
55 /*
56  * CS3 Config Register Init:
57  *      CS3 Enabled
58  *      AddrBus: 8bits
59  *      DataBus: 4bytes
60  *      Multiplexed: Yes
61  *      MuxBank: 00
62  */
63 #define CONFIG_SYS_CS3_CFG              0x00009310
64
65 #endif /* __CONFIG_CHARON_H */