include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13 #define CONFIG_SPL_FAT_SUPPORT
  14 /*
  15 #define CONFIG_SPL_SATA_SUPPORT
  16 */
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  23 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  24
  25 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  26
  27 #include <asm/arch/imx-regs.h>
  28 #include <asm/imx-common/gpio.h>
  29
  30 /* ATAGs */
  31 #define CONFIG_CMDLINE_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34 #define CONFIG_SERIAL_TAG
  35 #define CONFIG_REVISION_TAG
  36
  37 #define CONFIG_SYS_GENERIC_BOARD
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  41
  42 /* Init Functions */
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_MISC_INIT_R
  45
  46 /* GPIO */
  47 #define CONFIG_MXC_GPIO
  48
  49 /* Serial */
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE           UART2_BASE
  52
  53 #ifdef CONFIG_SPI_FLASH
  54
  55 /* SPI */
  56 #define CONFIG_CMD_SF
  57 #ifdef CONFIG_CMD_SF
  58   #define CONFIG_MXC_SPI
  59   #define CONFIG_SPI_FLASH_MTD
  60   #define CONFIG_SPI_FLASH_BAR
  61   #define CONFIG_SPI_FLASH_WINBOND
  62   #define CONFIG_SF_DEFAULT_BUS              0
  63   #define CONFIG_SF_DEFAULT_CS               0
  64                                              /* GPIO 3-19 (21248) */
  65   #define CONFIG_SF_DEFAULT_SPEED            30000000
  66   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  67 #endif
  68
  69 #else
  70 /* Enable NAND support */
  71 #define CONFIG_CMD_TIME
  72 #define CONFIG_CMD_NAND
  73 #define CONFIG_CMD_NAND_TRIMFFS
  74 #ifdef CONFIG_CMD_NAND
  75   #define CONFIG_NAND_MXS
  76   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  77   #define CONFIG_SYS_NAND_BASE          0x40000000
  78   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  79   #define CONFIG_SYS_NAND_ONFI_DETECTION
  80
  81   /* DMA stuff, needed for GPMI/MXS NAND support */
  82   #define CONFIG_APBH_DMA
  83   #define CONFIG_APBH_DMA_BURST
  84   #define CONFIG_APBH_DMA_BURST8
  85 #endif
  86
  87 #endif /* CONFIG_SPI_FLASH */
  88
  89 /* Flattened Image Tree Suport */
  90 #define CONFIG_FIT
  91 #define CONFIG_FIT_VERBOSE
  92
  93 /* I2C Configs */
  94 #define CONFIG_CMD_I2C
  95 #define CONFIG_SYS_I2C
  96 #define CONFIG_SYS_I2C_MXC
  97 #define CONFIG_SYS_I2C_SPEED            100000
  98 #define CONFIG_I2C_GSC                  0
  99 #define CONFIG_I2C_PMIC                 1
 100
 101 /* MMC Configs */
 102 #define CONFIG_FSL_ESDHC
 103 #define CONFIG_FSL_USDHC
 104 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 105 #define CONFIG_SYS_FSL_USDHC_NUM       1
 106 #define CONFIG_MMC
 107 #define CONFIG_CMD_MMC
 108 #define CONFIG_GENERIC_MMC
 109 #define CONFIG_BOUNCE_BUFFER
 110
 111 /* Filesystem support */
 112 #define CONFIG_CMD_EXT2
 113 #define CONFIG_CMD_FAT
 114 #define CONFIG_CMD_UBIFS
 115 #define CONFIG_DOS_PARTITION
 116
 117 /*
 118  * SATA Configs
 119  */
 120 #define CONFIG_CMD_SATA
 121 #ifdef CONFIG_CMD_SATA
 122   #define CONFIG_DWC_AHSATA
 123   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 124   #define CONFIG_DWC_AHSATA_PORT_ID     0
 125   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 126   #define CONFIG_LBA48
 127   #define CONFIG_LIBATA
 128 #endif
 129
 130 /*
 131  * PCI express
 132  */
 133 #define CONFIG_CMD_PCI
 134 #ifdef CONFIG_CMD_PCI
 135 #define CONFIG_PCI
 136 #define CONFIG_PCI_PNP
 137 #define CONFIG_PCI_SCAN_SHOW
 138 #define CONFIG_PCI_FIXUP_DEV
 139 #define CONFIG_PCIE_IMX
 140 #endif
 141
 142 /*
 143  * PMIC
 144  */
 145 #define CONFIG_POWER
 146 #define CONFIG_POWER_I2C
 147 #define CONFIG_POWER_PFUZE100
 148 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 149 #define CONFIG_POWER_LTC3676
 150 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 151
 152 /* Various command support */
 153 #include <config_cmd_default.h>
 154 #undef CONFIG_CMD_IMLS
 155 #define CONFIG_CMD_PING
 156 #define CONFIG_CMD_DHCP
 157 #define CONFIG_CMD_MII
 158 #define CONFIG_CMD_NET
 159 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 160 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 161 #define CONFIG_CMD_SETEXPR
 162 #define CONFIG_CMD_BOOTZ
 163 #define CONFIG_CMD_GSC
 164 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 165 #define CONFIG_CMD_UBI
 166 #define CONFIG_RBTREE
 167 #define CONFIG_LZO
 168 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 169 #ifdef CONFIG_CMD_FUSE
 170 #define CONFIG_MXC_OCOTP
 171 #endif
 172
 173
 174 /* Ethernet support */
 175 #define CONFIG_FEC_MXC
 176 #define CONFIG_E1000
 177 #define CONFIG_MII
 178 #define IMX_FEC_BASE             ENET_BASE_ADDR
 179 #define CONFIG_FEC_XCV_TYPE      RGMII
 180 #define CONFIG_FEC_MXC_PHYADDR   0
 181 #define CONFIG_PHYLIB
 182 #define CONFIG_ARP_TIMEOUT       200UL
 183
 184 /* USB Configs */
 185 #define CONFIG_CMD_USB
 186 #define CONFIG_USB_EHCI
 187 #define CONFIG_USB_EHCI_MX6
 188 #define CONFIG_USB_STORAGE
 189 #define CONFIG_USB_HOST_ETHER
 190 #define CONFIG_USB_ETHER_ASIX
 191 #define CONFIG_USB_ETHER_SMSC95XX
 192 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 193 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 194 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 195 #define CONFIG_MXC_USB_FLAGS      0
 196 #define CONFIG_USB_KEYBOARD
 197 #define CONFIG_CI_UDC
 198 #define CONFIG_USBD_HS
 199 #define CONFIG_USB_GADGET_DUALSPEED
 200 #define CONFIG_USB_ETHER
 201 #define CONFIG_USB_ETH_CDC
 202 #define CONFIG_NETCONSOLE
 203 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 204
 205 /* Framebuffer and LCD */
 206 #define CONFIG_VIDEO
 207 #define CONFIG_VIDEO_IPUV3
 208 #define CONFIG_CFB_CONSOLE
 209 #define CONFIG_VGA_AS_SINGLE_DEVICE
 210 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 211 #define CONFIG_VIDEO_BMP_RLE8
 212 #define CONFIG_SPLASH_SCREEN
 213 #define CONFIG_BMP_16BPP
 214 #define CONFIG_VIDEO_LOGO
 215 #define CONFIG_IPUV3_CLK          260000000
 216 #define CONFIG_CMD_HDMIDETECT
 217 #define CONFIG_CONSOLE_MUX
 218 #define CONFIG_IMX_HDMI
 219 #define CONFIG_IMX_VIDEO_SKIP
 220
 221 /* serial console (ttymxc1,115200) */
 222 #define CONFIG_CONS_INDEX              1
 223 #define CONFIG_BAUDRATE                115200
 224
 225 /* Miscellaneous configurable options */
 226 #define CONFIG_SYS_LONGHELP
 227 #define CONFIG_SYS_HUSH_PARSER
 228 #define CONFIG_SYS_PROMPT                    "Ventana > "
 229 #define CONFIG_SYS_CBSIZE                    1024
 230 #define CONFIG_AUTO_COMPLETE
 231 #define CONFIG_CMDLINE_EDITING
 232 #define CONFIG_HWCONFIG
 233
 234 /* Print Buffer Size */
 235 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 236 #define CONFIG_SYS_MAXARGS                 16
 237 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 238
 239 /* Memory configuration */
 240 #define CONFIG_SYS_MEMTEST_START       0x10000000
 241 #define CONFIG_SYS_MEMTEST_END         0x10010000
 242 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 243 #define CONFIG_SYS_TEXT_BASE             0x17800000
 244 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 245
 246 /* Physical Memory Map */
 247 #define CONFIG_NR_DRAM_BANKS           1
 248 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 249 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 250 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 251 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 252
 253 #define CONFIG_SYS_INIT_SP_OFFSET \
 254         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 255 #define CONFIG_SYS_INIT_SP_ADDR \
 256         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 257
 258 /* FLASH and environment organization */
 259 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 260
 261 /*
 262  * MTD Command for mtdparts
 263  */
 264 #define CONFIG_CMD_MTDPARTS
 265 #define CONFIG_MTD_DEVICE
 266 #define CONFIG_MTD_PARTITIONS
 267 #ifdef CONFIG_SPI_FLASH
 268 #define MTDIDS_DEFAULT    "nor0=nor"
 269 #define MTDPARTS_DEFAULT  \
 270         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 271 #else
 272 #define MTDIDS_DEFAULT    "nand0=nand"
 273 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 274 #endif
 275
 276 /* Persistent Environment Config */
 277 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 278 #ifdef CONFIG_SPI_FLASH
 279 #define CONFIG_ENV_IS_IN_SPI_FLASH
 280 #else
 281 #define CONFIG_ENV_IS_IN_NAND
 282 #endif
 283 #if defined(CONFIG_ENV_IS_IN_MMC)
 284   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 285   #define CONFIG_ENV_SIZE                (8 * 1024)
 286   #define CONFIG_SYS_MMC_ENV_DEV         0
 287 #elif defined(CONFIG_ENV_IS_IN_NAND)
 288   #define CONFIG_ENV_OFFSET              (16 << 20)
 289   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 290   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 291   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 292   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 293 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 294   #define CONFIG_ENV_OFFSET              (512 * 1024)
 295   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 296   #define CONFIG_ENV_SIZE                (8 * 1024)
 297   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 298   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 299   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 300   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 301 #endif
 302
 303 /* Environment */
 304 #define CONFIG_BOOTDELAY          3
 305 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 306 #define CONFIG_IPADDR             192.168.1.1
 307 #define CONFIG_SERVERIP           192.168.1.146
 308 #define HWCONFIG_DEFAULT \
 309         "hwconfig=rs232;" \
 310         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 311
 312 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 313         "console=ttymxc1\0" \
 314         "bootdevs=usb mmc sata flash\0" \
 315         HWCONFIG_DEFAULT \
 316         "video=\0" \
 317         \
 318         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 319         "mtdids=" MTDIDS_DEFAULT "\0" \
 320         \
 321         "fdt_high=0xffffffff\0" \
 322         "fdt_addr=0x18000000\0" \
 323         "loadfdt=" \
 324                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 325                         "echo Loaded DTB from boot/${fdt_file}; " \
 326                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 327                         "echo Loaded DTB from boot/${fdt_file1}; " \
 328                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 329                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 330                 "fi\0" \
 331         \
 332         "script=boot/6x_bootscript-ventana\0" \
 333         "loadscript=" \
 334                 "if ${fsload} ${loadaddr} ${script}; then " \
 335                         "source; " \
 336                 "fi\0" \
 337         \
 338         "uimage=boot/uImage\0" \
 339         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 340         "mmc_boot=" \
 341                 "setenv fsload 'ext2load mmc 0:1'; " \
 342                 "mmc dev 0 && mmc rescan && " \
 343                 "run loadscript; " \
 344                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 345                         "setenv bootargs console=${console},${baudrate} " \
 346                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 347                                 "rootwait rw ${video} ${extra}; " \
 348                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 349                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 350                         "else " \
 351                                 "bootm; " \
 352                         "fi; " \
 353                 "fi\0" \
 354         \
 355         "sata_boot=" \
 356                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 357                 "run loadscript; " \
 358                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 359                         "setenv bootargs console=${console},${baudrate} " \
 360                                 "root=/dev/sda1 rootfstype=ext4 " \
 361                                 "rootwait rw ${video} ${extra}; " \
 362                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 363                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 364                         "else " \
 365                                 "bootm; " \
 366                         "fi; " \
 367                 "fi\0" \
 368         "usb_boot=" \
 369                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 370                 "run loadscript; " \
 371                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 372                         "setenv bootargs console=${console},${baudrate} " \
 373                                 "root=/dev/sda1 rootfstype=ext4 " \
 374                                 "rootwait rw ${video} ${extra}; " \
 375                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 376                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 377                         "else " \
 378                                 "bootm; " \
 379                         "fi; " \
 380                 "fi\0"
 381
 382 #ifdef CONFIG_SPI_FLASH
 383         #define CONFIG_EXTRA_ENV_SETTINGS \
 384         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 385         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 386         "image_uboot=ventana/u-boot_spi.imx\0" \
 387         \
 388         "spi_koffset=0x90000\0" \
 389         "spi_klen=0x200000\0" \
 390         \
 391         "spi_updateuboot=echo Updating uboot from " \
 392                 "${serverip}:${image_uboot}...; " \
 393                 "tftpboot ${loadaddr} ${image_uboot} && " \
 394                 "sf probe && sf erase 0 80000 && " \
 395                         "sf write ${loadaddr} 400 ${filesize}\0" \
 396         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 397                 "to ${spi_koffset} ...; " \
 398                 "tftp ${loadaddr} ${image_os} && " \
 399                 "sf probe && " \
 400                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 401         \
 402         "flash_boot=" \
 403                 "if sf probe && " \
 404                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 405                         "setenv bootargs console=${console},${baudrate} " \
 406                                 "root=/dev/mtdblock3 " \
 407                                 "rootfstype=squashfs,jffs2 " \
 408                                 "${video} ${extra}; " \
 409                         "bootm; " \
 410                 "fi\0"
 411 #else
 412         #define CONFIG_EXTRA_ENV_SETTINGS \
 413         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 414         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 415         \
 416         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 417                 "tftp ${loadaddr} ${image_rootfs} && " \
 418                 "nand erase.part rootfs && " \
 419                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 420         \
 421         "flash_boot=" \
 422                 "setenv fsload 'ubifsload'; " \
 423                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 424                 "run loadscript; " \
 425                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 426                         "setenv bootargs console=${console},${baudrate} " \
 427                                 "root=ubi0:rootfs ubi.mtd=2 " \
 428                                 "rootfstype=ubifs ${video} ${extra}; " \
 429                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 430                                 "ubifsumount; " \
 431                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 432                         "else " \
 433                                 "ubifsumount; bootm; " \
 434                         "fi; " \
 435                 "fi\0"
 436 #endif
 437
 438 #define CONFIG_BOOTCOMMAND \
 439         "for btype in ${bootdevs}; do " \
 440                 "echo; echo Attempting ${btype} boot...; " \
 441                 "if run ${btype}_boot; then; fi; " \
 442         "done"
 443
 444 /* Device Tree Support */
 445 #define CONFIG_OF_BOARD_SETUP
 446 #define CONFIG_OF_LIBFDT
 447 #define CONFIG_FDT_FIXUP_PARTITIONS
 448
 449 #ifndef CONFIG_SYS_DCACHE_OFF
 450   #define CONFIG_CMD_CACHE
 451 #endif
 452
 453 #endif                         /* __CONFIG_H */