include/configs/ipam390.h

   1 /*
   2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   3  * Based on:
   4  * U-Boot:include/configs/da850evm.h
   5  *
   6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   7  *
   8  * Based on davinci_dvevm.h. Original Copyrights follow:
   9  *
  10  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * Board
  20  */
  21 #define CONFIG_DRIVER_TI_EMAC
  22 #define CONFIG_BARIX_IPAM390
  23
  24 /*
  25  * SoC Configuration
  26  */
  27 #define CONFIG_MACH_DAVINCI_DA850_EVM
  28 #define CONFIG_ARM926EJS                /* arm926ejs CPU core */
  29 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  30 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  31 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  32 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  33 #define CONFIG_SYS_OSCIN_FREQ           24000000
  34 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  35 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  36 #define CONFIG_SYS_DA850_PLL_INIT
  37 #define CONFIG_SYS_DA850_DDR_INIT
  38 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  39
  40 /*
  41  * Memory Info
  42  */
  43 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  44 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  45 #define PHYS_SDRAM_1_SIZE       (128 << 20) /* SDRAM size 128MB */
  46 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  47
  48 /* memtest start addr */
  49 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  50
  51 /* memtest will be run on 16MB */
  52 #define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
  53
  54 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  55
  56 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  57         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  58         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  59         DAVINCI_SYSCFG_SUSPSRC_UART0 |          \
  60         DAVINCI_SYSCFG_SUSPSRC_EMAC)
  61
  62 /*
  63  * PLL configuration
  64  */
  65 #define CONFIG_SYS_DV_CLKMODE          0
  66 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  67 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  68 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  69 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  70 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  71 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  72 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  73 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  74
  75 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  76 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  77 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  78 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  79
  80 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  81 #define CONFIG_SYS_DA850_PLL1_PLLM     24
  82
  83 /*
  84  * DDR2 memory configuration
  85  */
  86 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  87                                         DV_DDR_PHY_EXT_STRBEN | \
  88                                         (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  89 #define CONFIG_SYS_DA850_DDR2_SDRCR     0x00000498
  90
  91 #define CONFIG_SYS_DA850_DDR2_SDBCR2    0x00000004
  92 #define CONFIG_SYS_DA850_DDR2_PBBPR     0x00000020
  93
  94
  95 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
  96         (13 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
  97         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
  98         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
  99         (2 << DV_DDR_SDTMR1_WR_SHIFT) |         \
 100         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
 101         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
 102         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
 103         (1 << DV_DDR_SDTMR1_WTR_SHIFT))
 104
 105 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
 106         (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 107         (2 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 108         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 109         (14 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 110         (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |    \
 111         (1 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 112         (2 << DV_DDR_SDTMR2_CKE_SHIFT))
 113
 114 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 115         (1 << DV_DDR_SDCR_DDR2EN_SHIFT) |       \
 116         (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |    \
 117         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 118         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 119         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 120         (2 << DV_DDR_SDCR_CL_SHIFT) |   \
 121         (3 << DV_DDR_SDCR_IBANK_SHIFT) |        \
 122         (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 123
 124 #define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(2) | \
 125                                 DAVINCI_ABCR_WSTROBE(2) | \
 126                                 DAVINCI_ABCR_WHOLD(1)   | \
 127                                 DAVINCI_ABCR_RSETUP(1)  | \
 128                                 DAVINCI_ABCR_RSTROBE(4) | \
 129                                 DAVINCI_ABCR_RHOLD(0)   | \
 130                                 DAVINCI_ABCR_TA(1)      | \
 131                                 DAVINCI_ABCR_ASIZE_8BIT)
 132
 133
 134 /*
 135  * Serial Driver info
 136  */
 137 #define CONFIG_SYS_NS16550
 138 #define CONFIG_SYS_NS16550_SERIAL
 139 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 140 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
 141 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 142 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 143 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
 144
 145 /*
 146  * Flash & Environment
 147  */
 148 #define CONFIG_NAND_DAVINCI
 149 #define CONFIG_SYS_NO_FLASH
 150 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 151 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 152 #define CONFIG_ENV_SIZE                 (128 << 10)
 153 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 154 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 155 #define CONFIG_SYS_NAND_PAGE_2K
 156 #define CONFIG_SYS_NAND_CS              3
 157 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 158 #define CONFIG_SYS_NAND_MASK_CLE                0x10
 159 #define CONFIG_SYS_NAND_MASK_ALE                0x8
 160 #undef CONFIG_SYS_NAND_HW_ECC
 161 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 162 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 163 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 164 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 165 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 166 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 167 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x120000
 168 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 169 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 170 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 171                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 172                                         CONFIG_SYS_MALLOC_LEN -       \
 173                                         GENERATED_GBL_DATA_SIZE)
 174 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 175                                 24, 25, 26, 27, 28, \
 176                                 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
 177                                 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
 178                                 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
 179                                 59, 60, 61, 62, 63 }
 180 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 181 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 182 #define CONFIG_SYS_NAND_ECCSIZE         512
 183 #define CONFIG_SYS_NAND_ECCBYTES        10
 184 #define CONFIG_SYS_NAND_OOBSIZE         64
 185 #define CONFIG_SPL_NAND_SUPPORT
 186 #define CONFIG_SPL_NAND_BASE
 187 #define CONFIG_SPL_NAND_DRIVERS
 188 #define CONFIG_SPL_NAND_ECC
 189 #define CONFIG_SPL_NAND_SIMPLE
 190 #define CONFIG_SPL_NAND_LOAD
 191
 192 /*
 193  * Network & Ethernet Configuration
 194  */
 195 #ifdef CONFIG_DRIVER_TI_EMAC
 196 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 197 #define CONFIG_BOOTP_DEFAULT
 198 #define CONFIG_BOOTP_DNS
 199 #define CONFIG_BOOTP_DNS2
 200 #define CONFIG_BOOTP_SEND_HOSTNAME
 201 #define CONFIG_NET_RETRY_COUNT  10
 202 #endif
 203
 204 /*
 205  * U-Boot general configuration
 206  */
 207 #define CONFIG_MISC_INIT_R
 208 #define CONFIG_BOARD_EARLY_INIT_F
 209 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 210 #define CONFIG_SYS_PROMPT       "U-Boot > " /* Command Prompt */
 211 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 212 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 213 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 214 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 215 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 216 #define CONFIG_VERSION_VARIABLE
 217 #define CONFIG_AUTO_COMPLETE
 218 #define CONFIG_SYS_HUSH_PARSER
 219 #define CONFIG_CMDLINE_EDITING
 220 #define CONFIG_SYS_LONGHELP
 221 #define CONFIG_CRC32_VERIFY
 222 #define CONFIG_MX_CYCLIC
 223
 224 /*
 225  * Linux Information
 226  */
 227 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 228 #define CONFIG_HWCONFIG         /* enable hwconfig */
 229 #define CONFIG_CMDLINE_TAG
 230 #define CONFIG_REVISION_TAG
 231 #define CONFIG_SETUP_MEMORY_TAGS
 232 #define CONFIG_BOOTARGS         \
 233         "mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp"
 234 #define CONFIG_BOOTDELAY        3
 235 #define CONFIG_EXTRA_ENV_SETTINGS \
 236         "hwconfig=dsp:wake=yes\0" \
 237         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"      \
 238         "mtdids=" MTDIDS_DEFAULT "\0"                           \
 239         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
 240         "setbootparms=nand read c0100000 200000 400000;"        \
 241                 "spl export atags c0100000;"                    \
 242                 "nand erase.part bootparms;"                    \
 243                 "nand write c0000100 180000 20000\0"            \
 244         "\0"
 245
 246 /*
 247  * U-Boot commands
 248  */
 249 #include <config_cmd_default.h>
 250 #define CONFIG_CMD_ENV
 251 #define CONFIG_CMD_ASKENV
 252 #define CONFIG_CMD_DHCP
 253 #define CONFIG_CMD_DIAG
 254 #define CONFIG_CMD_MII
 255 #define CONFIG_CMD_PING
 256 #define CONFIG_CMD_SAVES
 257 #define CONFIG_CMD_MEMORY
 258
 259 #ifdef CONFIG_CMD_BDI
 260 #define CONFIG_CLOCKS
 261 #endif
 262
 263 #ifndef CONFIG_DRIVER_TI_EMAC
 264 #undef CONFIG_CMD_NET
 265 #undef CONFIG_CMD_DHCP
 266 #undef CONFIG_CMD_MII
 267 #undef CONFIG_CMD_PING
 268 #endif
 269
 270 #define CONFIG_CMD_NAND
 271 #define CONFIG_CMD_NAND_TRIMFFS
 272
 273 #define CONFIG_CMD_MTDPARTS
 274 #define CONFIG_MTD_DEVICE
 275 #define CONFIG_MTD_PARTITIONS
 276 #define CONFIG_LZO
 277 #define CONFIG_RBTREE
 278 #define CONFIG_CMD_UBI
 279 #define CONFIG_CMD_UBIFS
 280
 281 #define MTDIDS_NAME_STR         "davinci_nand.0"
 282 #define MTDIDS_DEFAULT          "nand0=" MTDIDS_NAME_STR
 283 #define MTDPARTS_DEFAULT        "mtdparts=" MTDIDS_NAME_STR ":" \
 284                                         "128k(u-boot-env),"     \
 285                                         "1408k(u-boot),"        \
 286                                         "128k(bootparms),"      \
 287                                         "384k(factory-info),"   \
 288                                         "4M(kernel),"   \
 289                                         "-(rootfs)"
 290
 291 /* defines for SPL */
 292 #define CONFIG_SPL
 293 #define CONFIG_SPL_FRAMEWORK
 294 #define CONFIG_SPL_BOARD_INIT
 295 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 296                                                 CONFIG_SYS_MALLOC_LEN)
 297 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 298 #define CONFIG_SPL_SERIAL_SUPPORT
 299 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 300 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 301 #define CONFIG_SPL_LDSCRIPT     "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 302 #define CONFIG_SPL_STACK        0x8001ff00
 303 #define CONFIG_SPL_TEXT_BASE    0x80000000
 304 #define CONFIG_SPL_MAX_SIZE     0x20000
 305 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 306
 307 /* additions for new relocation code, must added to all boards */
 308 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 309
 310 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 311                                         GENERATED_GBL_DATA_SIZE)
 312
 313 /* add FALCON boot mode */
 314 #define CONFIG_CMD_SPL
 315 #define CONFIG_SPL_OS_BOOT
 316 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
 317 #define CONFIG_SYS_SPL_ARGS_ADDR        LINUX_BOOT_PARAM_ADDR
 318 #define CONFIG_CMD_SPL_NAND_OFS         0x00180000
 319 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400
 320
 321 /* GPIO support */
 322 #define CONFIG_SPL_GPIO_SUPPORT
 323 #define CONFIG_DA8XX_GPIO
 324 #define CONFIG_IPAM390_GPIO_BOOTMODE    ((16 * 7) + 14)
 325
 326 #define CONFIG_SHOW_BOOT_PROGRESS
 327 #define CONFIG_IPAM390_GPIO_LED_RED     ((16 * 7) + 11)
 328 #define CONFIG_IPAM390_GPIO_LED_GREEN   ((16 * 7) + 12)
 329
 330 #endif /* __CONFIG_H */