]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - include/configs/kmeter1.h
mpc832x: add support for the mpc8321 based suvd3 board
[karo-tx-uboot.git] / include / configs / kmeter1.h
1 /*
2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
3  *                    Dave Liu <daveliu@freescale.com>
4  *
5  * Copyright (C) 2007 Logic Product Development, Inc.
6  *                    Peter Barada <peterb@logicpd.com>
7  *
8  * Copyright (C) 2007 MontaVista Software, Inc.
9  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
10  *
11  * (C) Copyright 2008-2011
12  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
13  *
14  * This program is free software; you can redistribute it and/or
15  * modify it under the terms of the GNU General Public License as
16  * published by the Free Software Foundation; either version 2 of
17  * the License, or (at your option) any later version.
18  */
19
20 #ifndef __CONFIG_H
21 #define __CONFIG_H
22
23 /*
24  * High Level Configuration Options
25  */
26 #define CONFIG_QE               /* Has QE */
27 #define CONFIG_MPC8360          /* MPC8360 CPU specific */
28 #define CONFIG_KMETER1          /* KMETER1 board specific */
29 #define CONFIG_HOSTNAME         kmeter1
30 #define CONFIG_KM_BOARD_NAME   "kmeter1"
31
32 #define CONFIG_SYS_TEXT_BASE    0xF0000000
33 #define CONFIG_KM_DEF_NETDEV    \
34         "netdev=eth2\0"         \
35
36 /* include common defines/options for all 83xx Keymile boards */
37 #include "km83xx-common.h"
38
39 #define CONFIG_MISC_INIT_R
40 /*
41  * System IO Setup
42  */
43 #define CONFIG_SYS_SICRH                (SICRH_UC1EOBI | SICRH_UC2E1OBI)
44
45 /*
46  * Hardware Reset Configuration Word
47  */
48 #define CONFIG_SYS_HRCW_LOW (\
49         HRCWL_CSB_TO_CLKIN_4X1 | \
50         HRCWL_CORE_TO_CSB_2X1 | \
51         HRCWL_CE_PLL_VCO_DIV_2 | \
52         HRCWL_CE_TO_PLL_1X6 )
53
54 #define CONFIG_SYS_HRCW_HIGH (\
55         HRCWH_CORE_ENABLE | \
56         HRCWH_FROM_0X00000100 | \
57         HRCWH_BOOTSEQ_DISABLE | \
58         HRCWH_SW_WATCHDOG_DISABLE | \
59         HRCWH_ROM_LOC_LOCAL_16BIT | \
60         HRCWH_BIG_ENDIAN | \
61         HRCWH_LALE_EARLY | \
62         HRCWH_LDP_CLEAR )
63
64 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000007f
65 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
66                                          SDRAM_CFG_SREN)
67 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
68 #define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
69 #define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
70                                  (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT))
71
72 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
73                                          CSCONFIG_ROW_BIT_13 | \
74                                          CSCONFIG_COL_BIT_10 | \
75                                          CSCONFIG_ODT_WR_ACS)
76
77 #define CONFIG_SYS_DDRCDR               0x40000001
78 #define CONFIG_SYS_DDR_MODE             0x47860452
79 #define CONFIG_SYS_DDR_MODE2            0x8080c000
80
81 #define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
82                                  (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
83                                  (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
84                                  (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
85                                  (0 << TIMING_CFG0_WWT_SHIFT) | \
86                                  (0 << TIMING_CFG0_RRT_SHIFT) | \
87                                  (0 << TIMING_CFG0_WRT_SHIFT) | \
88                                  (0 << TIMING_CFG0_RWT_SHIFT))
89
90 #define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
91                                  (2 << TIMING_CFG1_WRTORD_SHIFT) | \
92                                  (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
93                                  (3 << TIMING_CFG1_WRREC_SHIFT) | \
94                                  (7 << TIMING_CFG1_REFREC_SHIFT) | \
95                                  (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
96                                  (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
97                                  (3 << TIMING_CFG1_PRETOACT_SHIFT))
98
99 #define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
100                                  (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
101                                  (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
102                                  (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
103                                  (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
104                                  (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
105                                  (5 << TIMING_CFG2_CPO_SHIFT))
106
107 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
108
109 #define CONFIG_SYS_PIGGY_BASE           0xE8000000
110 #define CONFIG_SYS_PIGGY_SIZE           128
111 #define CONFIG_SYS_PAXE_BASE            0xA0000000
112 #define CONFIG_SYS_PAXE_SIZE            512
113
114 /* EEprom support */
115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
116
117 /*
118  * Local Bus Configuration & Clock Setup
119  */
120 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
121 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_2
122 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
123
124 /*
125  * Init Local Bus Memory Controller:
126  *
127  * Bank Bus     Machine PortSz  Size  Device
128  * ---- ---     ------- ------  -----  ------
129  *  3   Local   GPCM     8 bit  512MB PAXE
130  *
131  */
132
133 /*
134  * PAXE on the local bus CS3
135  */
136 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE
137 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
138
139 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_PAXE_BASE | \
140                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
141                                 BR_V)
142 #define CONFIG_SYS_OR3_PRELIM   (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
143                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
144                                 OR_GPCM_SCY_2 | \
145                                 OR_GPCM_TRLX | OR_GPCM_EAD)
146
147 /*
148  * MMU Setup
149  */
150
151 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
152 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
153                                  BATL_MEMCOHERENCE)
154 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \
155                                  BATU_VS | BATU_VP)
156 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
157                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
158 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
159
160 #ifdef CONFIG_PCI
161 /* PCI MEM space: cacheable */
162 #define CFG_IBAT6L      (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
163 #define CFG_IBAT6U      (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
164 #define CFG_DBAT6L      CFG_IBAT6L
165 #define CFG_DBAT6U      CFG_IBAT6U
166 /* PCI MMIO space: cache-inhibit and guarded */
167 #define CFG_IBAT7L      (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
168                          BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
169 #define CFG_IBAT7U      (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
170 #define CFG_DBAT7L      CFG_IBAT7L
171 #define CFG_DBAT7U      CFG_IBAT7U
172 #else /* CONFIG_PCI */
173 #define CONFIG_SYS_IBAT6L       (0)
174 #define CONFIG_SYS_IBAT6U       (0)
175 #define CONFIG_SYS_IBAT7L       (0)
176 #define CONFIG_SYS_IBAT7U       (0)
177 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
178 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
179 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
180 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
181 #endif /* CONFIG_PCI */
182
183 #endif /* __CONFIG_H */