3 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
4 * This work has been supported by: QTechnology http://qtec.com/
5 * This program is free software: you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation, either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program. If not, see <http://www.gnu.org/licenses/>.
25 #define CONFIG_XILINX_ML507 1
26 #define CONFIG_XILINX_440 1
29 #include "../board/xilinx/ml507/xparameters.h"
32 #define CFG_SDRAM_BASE 0x0
33 #define CFG_SDRAM_SIZE_MB 256
34 #define CFG_MONITOR_BASE 0x04000000
35 #define CFG_MONITOR_LEN ( 192 * 1024 )
36 #define CFG_MALLOC_LEN ( 128 * 1024 )
37 #define CFG_ISRAM_BASE XPAR_XPS_BRAM_IF_CNTLR_1_BASEADDR
40 #define CONFIG_XILINX_UARTLITE
41 #define CONFIG_BAUDRATE 9600
42 #define CFG_BAUDRATE_TABLE {9600}
43 #define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR
46 #include <config_cmd_default.h>
47 #define CONFIG_CMD_ASKENV
48 #define CONFIG_CMD_CACHE
49 #define CONFIG_CMD_DIAG
50 #define CONFIG_CMD_ELF
51 #define CONFIG_CMD_IRQ
52 #define CONFIG_CMD_REGINFO
56 #undef CONFIG_CMD_PING
57 #undef CONFIG_CMD_DHCP
58 #undef CONFIG_CMD_EEPROM
59 #undef CONFIG_CMD_IMLS
62 #define CFG_ENV_IS_NOWHERE
63 #define CFG_ENV_SIZE 0x200
64 #define CFG_ENV_OFFSET 0x100
67 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
68 #define CFG_LONGHELP /* undef to save memory */
69 #define CFG_PROMPT "board:/# " /* Monitor Command Prompt */
70 #if defined(CONFIG_CMD_KGDB)
71 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
73 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
75 #define CFG_PBSIZE ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
76 #define CFG_MAXARGS 16 /* max number of command args */
77 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
78 #define CFG_MEMTEST_START 0x0400000 /* memtest works on */
79 #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
80 #define CFG_LOAD_ADDR 0x400000 /* default load address */
81 #define CFG_EXTBDINFO 1 /* Extended board_into (bd_t) */
82 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
83 #define CONFIG_CMDLINE_EDITING /* add command line history */
84 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
85 #define CONFIG_LOOPW /* enable loopw command */
86 #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
87 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
88 #define CONFIG_VERSION_VARIABLE /* include version env variable */
89 #define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup */
90 #define CFG_HUSH_PARSER /* Use the HUSH parser */
91 #define CFG_PROMPT_HUSH_PS2 "> "
92 #define CONFIG_LOADS_ECHO /* echo on for serial download */
93 #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
94 #define CFG_BOOTMAPSZ ( 8 << 20 ) /* Initial Memory map for Linux */
95 #define CONFIG_PREBOOT "echo U-Boot is up and runnining;"
98 #define CFG_INIT_RAM_ADDR 0x800000 /* Initial RAM address */
99 #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
100 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
101 #define CFG_GBL_DATA_OFFSET ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
102 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
104 #define CONFIG_SYS_CLK_FREQ 400000000
107 #define CFG_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
108 #define CFG_FLASH_SIZE (32*1024*1024)
109 #define CFG_FLASH_CFI 1
110 #define CFG_FLASH_CFI_DRIVER 1
111 #define CFG_FLASH_EMPTY_INFO 1
112 #define CFG_MAX_FLASH_BANKS 1
113 #define CFG_MAX_FLASH_SECT ( CFG_FLASH_SIZE / ( 64 * 1024 ) )
114 #define CFG_FLASH_PROTECTION
116 #endif /* __CONFIG_H */