include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 #define CONFIG_CMD_FUSE
  25 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  26 #define CONFIG_MXC_OCOTP
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 #define CONFIG_CMD_PING
  33 #define CONFIG_CMD_DHCP
  34 #define CONFIG_CMD_MII
  35 #define CONFIG_CMD_NET
  36 #define CONFIG_FEC_MXC
  37 #define CONFIG_MII
  38 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  39 #define CONFIG_FEC_XCV_TYPE             RGMII
  40 #define CONFIG_ETHPRIME                 "FEC"
  41 #define CONFIG_FEC_MXC_PHYADDR          1
  42
  43 #define CONFIG_PHYLIB
  44 #define CONFIG_PHY_ATHEROS
  45
  46 #define CONFIG_CMD_SF
  47 #ifdef CONFIG_CMD_SF
  48 #define CONFIG_SPI_FLASH
  49 #define CONFIG_SPI_FLASH_STMICRO
  50 #define CONFIG_MXC_SPI
  51 #define CONFIG_SF_DEFAULT_BUS           0
  52 #define CONFIG_SF_DEFAULT_CS            0
  53 #define CONFIG_SF_DEFAULT_SPEED         20000000
  54 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  55 #endif
  56
  57 /* Command definition */
  58 #define CONFIG_CMD_BMODE
  59 #define CONFIG_CMD_SETEXPR
  60
  61 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  62 #define EMMC_ENV \
  63         "emmcdev=2\0" \
  64         "update_emmc_firmware=" \
  65                 "if test ${ip_dyn} = yes; then " \
  66                         "setenv get_cmd dhcp; " \
  67                 "else " \
  68                         "setenv get_cmd tftp; " \
  69                 "fi; " \
  70                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  71                         "if mmc dev ${emmcdev} 1; then "        \
  72                                 "setexpr fw_sz ${filesize} / 0x200; " \
  73                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  74                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  75                         "fi; "  \
  76                 "fi\0"
  77 #else
  78 #define EMMC_ENV ""
  79 #endif
  80
  81 #ifndef VIDEO_ARGS
  82 #define VIDEO_ARGS ""
  83 #endif
  84
  85 #ifndef VIDEO_ARGS_SCRIPT
  86 #define VIDEO_ARGS_SCRIPT ""
  87 #endif
  88
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         "script=boot.scr\0" \
  91         "image=zImage\0" \
  92         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  93         "fdt_addr=0x18000000\0" \
  94         "boot_fdt=try\0" \
  95         "ip_dyn=yes\0" \
  96         "console=" CONFIG_CONSOLE_DEV "\0" \
  97         "fdt_high=0xffffffff\0"   \
  98         "initrd_high=0xffffffff\0" \
  99         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 100         "mmcpart=1\0" \
 101         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 102         "update_sd_firmware=" \
 103                 "if test ${ip_dyn} = yes; then " \
 104                         "setenv get_cmd dhcp; " \
 105                 "else " \
 106                         "setenv get_cmd tftp; " \
 107                 "fi; " \
 108                 "if mmc dev ${mmcdev}; then "   \
 109                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 110                                 "setexpr fw_sz ${filesize} / 0x200; " \
 111                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 112                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 113                         "fi; "  \
 114                 "fi\0" \
 115         EMMC_ENV          \
 116         "video_args_hdmi=setenv video_args $video_args " \
 117                 "video=mxcfb${fb}:dev=hdmi,1280x720M@60,if=RGB24\0" \
 118         "video_args_lvds=setenv video_args $video_args " \
 119                 "video=mxcfb${fb}:dev=ldb,LDB-XGA,if=RGB666\0" \
 120         "video_args_lcd=setenv video_args $video_args " \
 121                 "video=mxcfb${fb}:dev=lcd,CLAA-WVGA,if=RGB666\0" \
 122         "fb=0\0" \
 123         "video_interfaces=hdmi lvds lcd\0" \
 124         "video_args_script=" \
 125                 "for v in ${video_interfaces}; do " \
 126                         "run video_args_${v}; " \
 127                         "setexpr fb $fb + 1; " \
 128                 "done\0" \
 129         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 130                 "root=${mmcroot} " \
 131                 VIDEO_ARGS "\0" \
 132         "loadbootscript=" \
 133                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 134         "bootscript=echo Running bootscript from mmc ...; " \
 135                 "source\0" \
 136         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 137         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 138         "mmcboot=echo Booting from mmc ...; " \
 139                 VIDEO_ARGS_SCRIPT \
 140                 "run mmcargs; " \
 141                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 142                         "if run loadfdt; then " \
 143                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 144                         "else " \
 145                                 "if test ${boot_fdt} = try; then " \
 146                                         "bootz; " \
 147                                 "else " \
 148                                         "echo WARN: Cannot load the DT; " \
 149                                 "fi; " \
 150                         "fi; " \
 151                 "else " \
 152                         "bootz; " \
 153                 "fi;\0" \
 154         "netargs=setenv bootargs console=${console},${baudrate} " \
 155                 "root=/dev/nfs " \
 156                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 157         "netboot=echo Booting from net ...; " \
 158                 "run netargs; " \
 159                 "if test ${ip_dyn} = yes; then " \
 160                         "setenv get_cmd dhcp; " \
 161                 "else " \
 162                         "setenv get_cmd tftp; " \
 163                 "fi; " \
 164                 "${get_cmd} ${image}; " \
 165                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 166                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 167                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 168                         "else " \
 169                                 "if test ${boot_fdt} = try; then " \
 170                                         "bootz; " \
 171                                 "else " \
 172                                         "echo WARN: Cannot load the DT; " \
 173                                 "fi; " \
 174                         "fi; " \
 175                 "else " \
 176                         "bootz; " \
 177                 "fi;\0"
 178
 179 #define CONFIG_BOOTCOMMAND \
 180         "mmc dev ${mmcdev};" \
 181         "if mmc rescan; then " \
 182                 "if run loadbootscript; then " \
 183                 "run bootscript; " \
 184                 "else " \
 185                         "if run loadimage; then " \
 186                                 "run mmcboot; " \
 187                         "else run netboot; " \
 188                         "fi; " \
 189                 "fi; " \
 190         "else run netboot; fi"
 191
 192 #define CONFIG_ARP_TIMEOUT     200UL
 193
 194 #define CONFIG_SYS_MEMTEST_START       0x10000000
 195 #define CONFIG_SYS_MEMTEST_END         0x10010000
 196 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 197
 198 #define CONFIG_STACKSIZE               (128 * 1024)
 199
 200 /* Physical Memory Map */
 201 #define CONFIG_NR_DRAM_BANKS           1
 202 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 203
 204 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 205 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 206 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 207
 208 #define CONFIG_SYS_INIT_SP_OFFSET \
 209         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 210 #define CONFIG_SYS_INIT_SP_ADDR \
 211         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 212
 213 /* Environment organization */
 214 #define CONFIG_ENV_SIZE                 (8 * 1024)
 215
 216 #define CONFIG_ENV_IS_IN_MMC
 217
 218 #if defined(CONFIG_ENV_IS_IN_MMC)
 219 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 220 #endif
 221
 222 /* Framebuffer */
 223 #define CONFIG_VIDEO
 224 #define CONFIG_VIDEO_IPUV3
 225 #define CONFIG_CFB_CONSOLE
 226 #define CONFIG_VGA_AS_SINGLE_DEVICE
 227 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 228 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 229 #define CONFIG_VIDEO_BMP_RLE8
 230 #define CONFIG_SPLASH_SCREEN
 231 #define CONFIG_SPLASH_SCREEN_ALIGN
 232 #define CONFIG_BMP_16BPP
 233 #define CONFIG_VIDEO_LOGO
 234 #define CONFIG_VIDEO_BMP_LOGO
 235 #define CONFIG_IPUV3_CLK 260000000
 236 #define CONFIG_IMX_HDMI
 237 #define CONFIG_IMX_VIDEO_SKIP
 238
 239 #ifndef CONFIG_SPL
 240 #define CONFIG_CI_UDC
 241 #define CONFIG_USBD_HS
 242 #define CONFIG_USB_GADGET_DUALSPEED
 243
 244 #define CONFIG_USB_GADGET
 245 #define CONFIG_CMD_USB_MASS_STORAGE
 246 #define CONFIG_USB_GADGET_MASS_STORAGE
 247 #define CONFIG_USBDOWNLOAD_GADGET
 248 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 249
 250 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 251 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 252 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 253 #endif
 254
 255 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */