include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 #define CONFIG_CMD_FUSE
  25 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  26 #define CONFIG_MXC_OCOTP
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_FSL_ESDHC
  31 #define CONFIG_FSL_USDHC
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  33
  34 #define CONFIG_MMC
  35 #define CONFIG_CMD_MMC
  36 #define CONFIG_GENERIC_MMC
  37 #define CONFIG_BOUNCE_BUFFER
  38 #define CONFIG_CMD_EXT2
  39 #define CONFIG_CMD_EXT4
  40 #define CONFIG_CMD_EXT4_WRITE
  41 #define CONFIG_CMD_FAT
  42 #define CONFIG_DOS_PARTITION
  43
  44 #define CONFIG_CMD_PING
  45 #define CONFIG_CMD_DHCP
  46 #define CONFIG_CMD_MII
  47 #define CONFIG_CMD_NET
  48 #define CONFIG_FEC_MXC
  49 #define CONFIG_MII
  50 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  51 #define CONFIG_FEC_XCV_TYPE             RGMII
  52 #define CONFIG_ETHPRIME                 "FEC"
  53 #define CONFIG_FEC_MXC_PHYADDR          1
  54
  55 #define CONFIG_PHYLIB
  56 #define CONFIG_PHY_ATHEROS
  57
  58 #define CONFIG_CMD_SF
  59 #ifdef CONFIG_CMD_SF
  60 #define CONFIG_SPI_FLASH
  61 #define CONFIG_SPI_FLASH_STMICRO
  62 #define CONFIG_MXC_SPI
  63 #define CONFIG_SF_DEFAULT_BUS           0
  64 #define CONFIG_SF_DEFAULT_CS            0
  65 #define CONFIG_SF_DEFAULT_SPEED         20000000
  66 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  67 #endif
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_CONS_INDEX              1
  72 #define CONFIG_BAUDRATE                        115200
  73
  74 /* Command definition */
  75 #define CONFIG_CMD_BMODE
  76 #define CONFIG_CMD_BOOTZ
  77 #define CONFIG_CMD_SETEXPR
  78
  79 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  80 #define EMMC_ENV \
  81         "emmcdev=2\0" \
  82         "update_emmc_firmware=" \
  83                 "if test ${ip_dyn} = yes; then " \
  84                         "setenv get_cmd dhcp; " \
  85                 "else " \
  86                         "setenv get_cmd tftp; " \
  87                 "fi; " \
  88                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  89                         "if mmc dev ${emmcdev} 1; then "        \
  90                                 "setexpr fw_sz ${filesize} / 0x200; " \
  91                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  92                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  93                         "fi; "  \
  94                 "fi\0"
  95 #else
  96 #define EMMC_ENV ""
  97 #endif
  98
  99 #ifndef VIDEO_ARGS
 100 #define VIDEO_ARGS ""
 101 #endif
 102
 103 #ifndef VIDEO_ARGS_SCRIPT
 104 #define VIDEO_ARGS_SCRIPT ""
 105 #endif
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         "script=boot.scr\0" \
 109         "image=zImage\0" \
 110         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 111         "fdt_addr=0x18000000\0" \
 112         "boot_fdt=try\0" \
 113         "ip_dyn=yes\0" \
 114         "console=" CONFIG_CONSOLE_DEV "\0" \
 115         "fdt_high=0xffffffff\0"   \
 116         "initrd_high=0xffffffff\0" \
 117         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 118         "mmcpart=1\0" \
 119         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 120         "update_sd_firmware=" \
 121                 "if test ${ip_dyn} = yes; then " \
 122                         "setenv get_cmd dhcp; " \
 123                 "else " \
 124                         "setenv get_cmd tftp; " \
 125                 "fi; " \
 126                 "if mmc dev ${mmcdev}; then "   \
 127                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 128                                 "setexpr fw_sz ${filesize} / 0x200; " \
 129                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 130                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 131                         "fi; "  \
 132                 "fi\0" \
 133         EMMC_ENV          \
 134         "video_args_hdmi=setenv video_args $video_args " \
 135                 "video=mxcfb${fb}:dev=hdmi,1280x720M@60,if=RGB24\0" \
 136         "video_args_lvds=setenv video_args $video_args " \
 137                 "video=mxcfb${fb}:dev=ldb,LDB-XGA,if=RGB666\0" \
 138         "video_args_lcd=setenv video_args $video_args " \
 139                 "video=mxcfb${fb}:dev=lcd,CLAA-WVGA,if=RGB666\0" \
 140         "fb=0\0" \
 141         "video_interfaces=hdmi lvds lcd\0" \
 142         "video_args_script=" \
 143                 "for v in ${video_interfaces}; do " \
 144                         "run video_args_${v}; " \
 145                         "setexpr fb $fb + 1; " \
 146                 "done\0" \
 147         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 148                 "root=${mmcroot} " \
 149                 VIDEO_ARGS "\0" \
 150         "loadbootscript=" \
 151                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 152         "bootscript=echo Running bootscript from mmc ...; " \
 153                 "source\0" \
 154         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 155         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 156         "mmcboot=echo Booting from mmc ...; " \
 157                 VIDEO_ARGS_SCRIPT \
 158                 "run mmcargs; " \
 159                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 160                         "if run loadfdt; then " \
 161                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 162                         "else " \
 163                                 "if test ${boot_fdt} = try; then " \
 164                                         "bootz; " \
 165                                 "else " \
 166                                         "echo WARN: Cannot load the DT; " \
 167                                 "fi; " \
 168                         "fi; " \
 169                 "else " \
 170                         "bootz; " \
 171                 "fi;\0" \
 172         "netargs=setenv bootargs console=${console},${baudrate} " \
 173                 "root=/dev/nfs " \
 174                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 175         "netboot=echo Booting from net ...; " \
 176                 "run netargs; " \
 177                 "if test ${ip_dyn} = yes; then " \
 178                         "setenv get_cmd dhcp; " \
 179                 "else " \
 180                         "setenv get_cmd tftp; " \
 181                 "fi; " \
 182                 "${get_cmd} ${image}; " \
 183                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 184                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 185                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 186                         "else " \
 187                                 "if test ${boot_fdt} = try; then " \
 188                                         "bootz; " \
 189                                 "else " \
 190                                         "echo WARN: Cannot load the DT; " \
 191                                 "fi; " \
 192                         "fi; " \
 193                 "else " \
 194                         "bootz; " \
 195                 "fi;\0"
 196
 197 #define CONFIG_BOOTCOMMAND \
 198         "mmc dev ${mmcdev};" \
 199         "if mmc rescan; then " \
 200                 "if run loadbootscript; then " \
 201                 "run bootscript; " \
 202                 "else " \
 203                         "if run loadimage; then " \
 204                                 "run mmcboot; " \
 205                         "else run netboot; " \
 206                         "fi; " \
 207                 "fi; " \
 208         "else run netboot; fi"
 209
 210 #define CONFIG_ARP_TIMEOUT     200UL
 211
 212 /* Miscellaneous configurable options */
 213 #define CONFIG_SYS_LONGHELP
 214 #define CONFIG_SYS_HUSH_PARSER
 215 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 216 #define CONFIG_AUTO_COMPLETE
 217 #define CONFIG_SYS_CBSIZE              256
 218 #define CONFIG_SYS_MAXARGS             16
 219 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 220
 221 #define CONFIG_SYS_MEMTEST_START       0x10000000
 222 #define CONFIG_SYS_MEMTEST_END         0x10010000
 223 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 224
 225 #define CONFIG_CMDLINE_EDITING
 226 #define CONFIG_STACKSIZE               (128 * 1024)
 227
 228 /* Physical Memory Map */
 229 #define CONFIG_NR_DRAM_BANKS           1
 230 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 231
 232 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 233 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 234 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 235
 236 #define CONFIG_SYS_INIT_SP_OFFSET \
 237         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 238 #define CONFIG_SYS_INIT_SP_ADDR \
 239         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 240
 241 /* Environment organization */
 242 #define CONFIG_ENV_SIZE                 (8 * 1024)
 243
 244 #define CONFIG_ENV_IS_IN_MMC
 245
 246 #if defined(CONFIG_ENV_IS_IN_MMC)
 247 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 248 #endif
 249
 250 #define CONFIG_OF_LIBFDT
 251
 252 #ifndef CONFIG_SYS_DCACHE_OFF
 253 #define CONFIG_CMD_CACHE
 254 #endif
 255
 256 /* Framebuffer */
 257 #define CONFIG_VIDEO
 258 #define CONFIG_VIDEO_IPUV3
 259 #define CONFIG_CFB_CONSOLE
 260 #define CONFIG_VGA_AS_SINGLE_DEVICE
 261 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 262 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 263 #define CONFIG_VIDEO_BMP_RLE8
 264 #define CONFIG_SPLASH_SCREEN
 265 #define CONFIG_SPLASH_SCREEN_ALIGN
 266 #define CONFIG_BMP_16BPP
 267 #define CONFIG_VIDEO_LOGO
 268 #define CONFIG_VIDEO_BMP_LOGO
 269 #define CONFIG_IPUV3_CLK 260000000
 270 #define CONFIG_IMX_HDMI
 271 #define CONFIG_IMX_VIDEO_SKIP
 272
 273 #ifndef CONFIG_SPL
 274 #define CONFIG_CI_UDC
 275 #define CONFIG_USBD_HS
 276 #define CONFIG_USB_GADGET_DUALSPEED
 277
 278 #define CONFIG_USB_GADGET
 279 #define CONFIG_CMD_USB_MASS_STORAGE
 280 #define CONFIG_USB_GADGET_MASS_STORAGE
 281 #define CONFIG_USBDOWNLOAD_GADGET
 282 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 283
 284 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 285 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 286 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 287 #endif
 288
 289 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */