include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12
  13 #include "mx6_common.h"
  14
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define CONFIG_CMDLINE_TAG
  19 #define CONFIG_SETUP_MEMORY_TAGS
  20 #define CONFIG_INITRD_TAG
  21 #define CONFIG_REVISION_TAG
  22
  23 #define CONFIG_IMX6_THERMAL
  24
  25 #define CONFIG_SYS_GENERIC_BOARD
  26
  27 /* Size of malloc() pool */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  29
  30 #define CONFIG_BOARD_EARLY_INIT_F
  31 #define CONFIG_BOARD_LATE_INIT
  32 #define CONFIG_MXC_GPIO
  33
  34 #define CONFIG_MXC_UART
  35
  36 #define CONFIG_CMD_FUSE
  37 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  38 #define CONFIG_MXC_OCOTP
  39 #endif
  40
  41 /* MMC Configs */
  42 #define CONFIG_FSL_ESDHC
  43 #define CONFIG_FSL_USDHC
  44 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  45
  46 #define CONFIG_MMC
  47 #define CONFIG_CMD_MMC
  48 #define CONFIG_GENERIC_MMC
  49 #define CONFIG_BOUNCE_BUFFER
  50 #define CONFIG_CMD_EXT2
  51 #define CONFIG_CMD_EXT4
  52 #define CONFIG_CMD_EXT4_WRITE
  53 #define CONFIG_CMD_FAT
  54 #define CONFIG_DOS_PARTITION
  55
  56 #define CONFIG_CMD_PING
  57 #define CONFIG_CMD_DHCP
  58 #define CONFIG_CMD_MII
  59 #define CONFIG_CMD_NET
  60 #define CONFIG_FEC_MXC
  61 #define CONFIG_MII
  62 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  63 #define CONFIG_FEC_XCV_TYPE             RGMII
  64 #define CONFIG_ETHPRIME                 "FEC"
  65 #define CONFIG_FEC_MXC_PHYADDR          1
  66
  67 #define CONFIG_PHYLIB
  68 #define CONFIG_PHY_ATHEROS
  69
  70 #define CONFIG_CMD_SF
  71 #ifdef CONFIG_CMD_SF
  72 #define CONFIG_SPI_FLASH
  73 #define CONFIG_SPI_FLASH_STMICRO
  74 #define CONFIG_MXC_SPI
  75 #define CONFIG_SF_DEFAULT_BUS           0
  76 #define CONFIG_SF_DEFAULT_CS            0
  77 #define CONFIG_SF_DEFAULT_SPEED         20000000
  78 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  79 #endif
  80
  81 /* allow to overwrite serial and ethaddr */
  82 #define CONFIG_ENV_OVERWRITE
  83 #define CONFIG_CONS_INDEX              1
  84 #define CONFIG_BAUDRATE                        115200
  85
  86 /* Command definition */
  87 #define CONFIG_CMD_BMODE
  88 #define CONFIG_CMD_BOOTZ
  89 #define CONFIG_CMD_SETEXPR
  90
  91 #define CONFIG_BOOTDELAY               1
  92
  93 #define CONFIG_LOADADDR                        0x12000000
  94 #define CONFIG_SYS_TEXT_BASE           0x17800000
  95
  96 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  97 #define EMMC_ENV \
  98         "emmcdev=2\0" \
  99         "update_emmc_firmware=" \
 100                 "if test ${ip_dyn} = yes; then " \
 101                         "setenv get_cmd dhcp; " \
 102                 "else " \
 103                         "setenv get_cmd tftp; " \
 104                 "fi; " \
 105                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 106                         "if mmc dev ${emmcdev} 1; then "        \
 107                                 "setexpr fw_sz ${filesize} / 0x200; " \
 108                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 109                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 110                         "fi; "  \
 111                 "fi\0"
 112 #else
 113 #define EMMC_ENV ""
 114 #endif
 115
 116 #ifndef VIDEO_ARGS
 117 #define VIDEO_ARGS ""
 118 #endif
 119
 120 #ifndef VIDEO_ARGS_SCRIPT
 121 #define VIDEO_ARGS_SCRIPT ""
 122 #endif
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS \
 125         "script=boot.scr\0" \
 126         "image=zImage\0" \
 127         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 128         "fdt_addr=0x18000000\0" \
 129         "boot_fdt=try\0" \
 130         "ip_dyn=yes\0" \
 131         "console=" CONFIG_CONSOLE_DEV "\0" \
 132         "fdt_high=0xffffffff\0"   \
 133         "initrd_high=0xffffffff\0" \
 134         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 135         "mmcpart=1\0" \
 136         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 137         "update_sd_firmware=" \
 138                 "if test ${ip_dyn} = yes; then " \
 139                         "setenv get_cmd dhcp; " \
 140                 "else " \
 141                         "setenv get_cmd tftp; " \
 142                 "fi; " \
 143                 "if mmc dev ${mmcdev}; then "   \
 144                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 145                                 "setexpr fw_sz ${filesize} / 0x200; " \
 146                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 147                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 148                         "fi; "  \
 149                 "fi\0" \
 150         EMMC_ENV          \
 151         "video_args_hdmi=setenv video_args $video_args " \
 152                 "video=mxcfb${fb}:dev=hdmi,1280x720M@60,if=RGB24\0" \
 153         "video_args_lvds=setenv video_args $video_args " \
 154                 "video=mxcfb${fb}:dev=ldb,LDB-XGA,if=RGB666\0" \
 155         "video_args_lcd=setenv video_args $video_args " \
 156                 "video=mxcfb${fb}:dev=lcd,CLAA-WVGA,if=RGB666\0" \
 157         "fb=0\0" \
 158         "video_interfaces=hdmi lvds lcd\0" \
 159         "video_args_script=" \
 160                 "for v in ${video_interfaces}; do " \
 161                         "run video_args_${v}; " \
 162                         "setexpr fb $fb + 1; " \
 163                 "done\0" \
 164         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 165                 "root=${mmcroot} " \
 166                 VIDEO_ARGS "\0" \
 167         "loadbootscript=" \
 168                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 169         "bootscript=echo Running bootscript from mmc ...; " \
 170                 "source\0" \
 171         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 172         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 173         "mmcboot=echo Booting from mmc ...; " \
 174                 VIDEO_ARGS_SCRIPT \
 175                 "run mmcargs; " \
 176                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 177                         "if run loadfdt; then " \
 178                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 179                         "else " \
 180                                 "if test ${boot_fdt} = try; then " \
 181                                         "bootz; " \
 182                                 "else " \
 183                                         "echo WARN: Cannot load the DT; " \
 184                                 "fi; " \
 185                         "fi; " \
 186                 "else " \
 187                         "bootz; " \
 188                 "fi;\0" \
 189         "netargs=setenv bootargs console=${console},${baudrate} " \
 190                 "root=/dev/nfs " \
 191                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 192         "netboot=echo Booting from net ...; " \
 193                 "run netargs; " \
 194                 "if test ${ip_dyn} = yes; then " \
 195                         "setenv get_cmd dhcp; " \
 196                 "else " \
 197                         "setenv get_cmd tftp; " \
 198                 "fi; " \
 199                 "${get_cmd} ${image}; " \
 200                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 201                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 202                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 203                         "else " \
 204                                 "if test ${boot_fdt} = try; then " \
 205                                         "bootz; " \
 206                                 "else " \
 207                                         "echo WARN: Cannot load the DT; " \
 208                                 "fi; " \
 209                         "fi; " \
 210                 "else " \
 211                         "bootz; " \
 212                 "fi;\0"
 213
 214 #define CONFIG_BOOTCOMMAND \
 215         "mmc dev ${mmcdev};" \
 216         "if mmc rescan; then " \
 217                 "if run loadbootscript; then " \
 218                 "run bootscript; " \
 219                 "else " \
 220                         "if run loadimage; then " \
 221                                 "run mmcboot; " \
 222                         "else run netboot; " \
 223                         "fi; " \
 224                 "fi; " \
 225         "else run netboot; fi"
 226
 227 #define CONFIG_ARP_TIMEOUT     200UL
 228
 229 /* Miscellaneous configurable options */
 230 #define CONFIG_SYS_LONGHELP
 231 #define CONFIG_SYS_HUSH_PARSER
 232 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 233 #define CONFIG_AUTO_COMPLETE
 234 #define CONFIG_SYS_CBSIZE              256
 235 #define CONFIG_SYS_MAXARGS             16
 236 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 237
 238 #define CONFIG_SYS_MEMTEST_START       0x10000000
 239 #define CONFIG_SYS_MEMTEST_END         0x10010000
 240 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 241
 242 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 243
 244 #define CONFIG_CMDLINE_EDITING
 245 #define CONFIG_STACKSIZE               (128 * 1024)
 246
 247 /* Physical Memory Map */
 248 #define CONFIG_NR_DRAM_BANKS           1
 249 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 250
 251 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 252 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 253 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 254
 255 #define CONFIG_SYS_INIT_SP_OFFSET \
 256         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257 #define CONFIG_SYS_INIT_SP_ADDR \
 258         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 259
 260 /* Environment organization */
 261 #define CONFIG_ENV_SIZE                 (8 * 1024)
 262
 263 #define CONFIG_ENV_IS_IN_MMC
 264
 265 #if defined(CONFIG_ENV_IS_IN_MMC)
 266 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 267 #endif
 268
 269 #define CONFIG_OF_LIBFDT
 270
 271 #ifndef CONFIG_SYS_DCACHE_OFF
 272 #define CONFIG_CMD_CACHE
 273 #endif
 274
 275 /* Framebuffer */
 276 #define CONFIG_VIDEO
 277 #define CONFIG_VIDEO_IPUV3
 278 #define CONFIG_CFB_CONSOLE
 279 #define CONFIG_VGA_AS_SINGLE_DEVICE
 280 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 281 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 282 #define CONFIG_VIDEO_BMP_RLE8
 283 #define CONFIG_SPLASH_SCREEN
 284 #define CONFIG_SPLASH_SCREEN_ALIGN
 285 #define CONFIG_BMP_16BPP
 286 #define CONFIG_VIDEO_LOGO
 287 #define CONFIG_VIDEO_BMP_LOGO
 288 #define CONFIG_IPUV3_CLK 260000000
 289 #define CONFIG_IMX_HDMI
 290 #define CONFIG_IMX_VIDEO_SKIP
 291
 292 #ifndef CONFIG_SPL
 293 #define CONFIG_CI_UDC
 294 #define CONFIG_USBD_HS
 295 #define CONFIG_USB_GADGET_DUALSPEED
 296
 297 #define CONFIG_USB_GADGET
 298 #define CONFIG_CMD_USB_MASS_STORAGE
 299 #define CONFIG_USB_GADGET_MASS_STORAGE
 300 #define CONFIG_USBDOWNLOAD_GADGET
 301 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 302
 303 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 304 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 305 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 306 #endif
 307
 308 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */