3 * Net Insight <www.netinsight.net>
4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
6 * Based on sheevaplug.h:
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11 * SPDX-License-Identifier: GPL-2.0+
14 #ifndef _CONFIG_OPENRD_H
15 #define _CONFIG_OPENRD_H
18 * Version number information
20 #ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
21 # define CONFIG_IDENT_STRING "\nOpenRD-Ultimate"
23 # ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
24 # define CONFIG_IDENT_STRING "\nOpenRD-Client"
26 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
27 # define CONFIG_IDENT_STRING "\nOpenRD-Base"
29 # error Unknown OpenRD board specified
35 * High Level Configuration Options (easy to change)
37 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
38 #define CONFIG_KW88F6281 1 /* SOC Name */
39 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
40 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
41 #define CONFIG_SYS_THUMB_BUILD
44 * Commands configuration
46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
47 #define CONFIG_SYS_MVFS
48 #define CONFIG_CMD_ENV
49 #define CONFIG_CMD_MII
50 #define CONFIG_CMD_MMC
51 #define CONFIG_CMD_NAND
52 #define CONFIG_CMD_IDE
55 * mv-common.h should be defined after CMD configs since it used them
56 * to enable certain macros
58 #include "mv-common.h"
61 * Environment variables configurations
63 #ifdef CONFIG_CMD_NAND
64 #define CONFIG_ENV_IS_IN_NAND 1
65 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
67 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
70 * max 4k env size is enough, but in case of nand
71 * it has to be rounded to sector size
73 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
74 #define CONFIG_ENV_ADDR 0x60000
75 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
77 * Environment is right behind U-Boot in flash. Make sure U-Boot
78 * doesn't grow into the environment area.
80 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
83 * Default environment variables
85 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
86 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
87 "${x_bootcmd_usb}; bootm 0x6400000;"
89 #define MTDIDS_DEFAULT "nand0=nand_mtd"
90 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
91 "0x400000@0x100000(uImage),"\
92 "0x1fb00000@0x500000(rootfs)"
94 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
95 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
96 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
97 "x_bootcmd_usb=usb start\0" \
98 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
99 "mtdids="MTDIDS_DEFAULT"\0" \
100 "mtdparts="MTDPARTS_DEFAULT"\0"
103 * Ethernet Driver configuration
105 #ifdef CONFIG_CMD_NET
106 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
107 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
109 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
111 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
112 # define CONFIG_PHY_BASE_ADR 0x0
113 # define PHY_NO "88E1121"
115 # define CONFIG_PHY_BASE_ADR 0x8
116 # define PHY_NO "88E1116"
118 #endif /* CONFIG_CMD_NET */
121 * SATA Driver configuration
123 #ifdef CONFIG_MVSATA_IDE
124 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
125 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
126 #endif /*CONFIG_MVSATA_IDE*/
128 #ifdef CONFIG_CMD_MMC
130 #define CONFIG_GENERIC_MMC
131 #define CONFIG_MVEBU_MMC
132 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
133 #endif /* CONFIG_CMD_MMC */
135 #endif /* _CONFIG_OPENRD_BASE_H */