3 * Stefano Babic, DENX Gmbh, sbabic@denx.de
6 * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
9 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
12 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
13 * Marius Groeger <mgroeger@sysgo.de>
15 * Configuation settings for the LUBBOCK board.
17 * See file CREDITS for list of people who contributed to this
20 * This program is free software; you can redistribute it and/or
21 * modify it under the terms of the GNU General Public License as
22 * published by the Free Software Foundation; either version 2 of
23 * the License, or (at your option) any later version.
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
30 * You should have received a copy of the GNU General Public License
31 * along with this program; if not, write to the Free Software
32 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
40 * High Level Configuration Options
43 #define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
46 #define BOARD_LATE_INIT 1
48 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
50 /* we will never enable dcache, because we have to setup MMU first */
51 #define CONFIG_SYS_NO_DCACHE
56 * Size of malloc() pool
58 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
59 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
66 * select serial console configuration
68 #define CONFIG_SERIAL_MULTI
69 #define CONFIG_FFUART 1 /* we use FFUART on Conxs */
70 #define CONFIG_BTUART 1 /* we use BTUART on Conxs */
71 #define CONFIG_STUART 1 /* we use STUART on Conxs */
73 /* allow to overwrite serial and ethaddr */
74 #define CONFIG_ENV_OVERWRITE
76 #define CONFIG_BAUDRATE 38400
78 #define CONFIG_DOS_PARTITION 1
81 * Command line configuration.
83 #include <config_cmd_default.h>
85 #define CONFIG_CMD_FAT
86 #define CONFIG_CMD_IMLS
87 #define CONFIG_CMD_PING
88 #define CONFIG_CMD_USB
90 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
92 #undef CONFIG_SHOW_BOOT_PROGRESS
94 #define CONFIG_BOOTDELAY 3
95 #define CONFIG_SERVERIP 192.168.1.99
96 #define CONFIG_BOOTCOMMAND "run boot_flash"
97 #define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\
98 " rw root=/dev/ram initrd=0xa0800000,5m"
100 #define CONFIG_EXTRA_ENV_SETTINGS \
101 "program_boot_mmc=" \
102 "mw.b 0xa0010000 0xff 0x20000; " \
104 "fatload mmc 0 0xa0010000 u-boot.bin; " \
106 "protect off 0x0 0x1ffff; " \
107 "erase 0x0 0x1ffff; " \
108 "cp.b 0xa0010000 0x0 0x20000; " \
110 "program_uzImage_mmc=" \
111 "mw.b 0xa0010000 0xff 0x180000; " \
113 "fatload mmc 0 0xa0010000 uzImage; " \
115 "protect off 0x40000 0x1bffff; " \
116 "erase 0x40000 0x1bffff; " \
117 "cp.b 0xa0010000 0x40000 0x180000; " \
119 "program_ramdisk_mmc=" \
120 "mw.b 0xa0010000 0xff 0x500000; " \
122 "fatload mmc 0 0xa0010000 ramdisk.gz; " \
124 "protect off 0x1c0000 0x6bffff; " \
125 "erase 0x1c0000 0x6bffff; " \
126 "cp.b 0xa0010000 0x1c0000 0x500000; " \
130 "fatload mmc 0 0xa0030000 uzImage && " \
131 "fatload mmc 0 0xa0800000 ramdisk.gz; " \
133 "bootm 0xa0030000; " \
136 "cp.b 0x1c0000 0xa0800000 0x500000; " \
139 #define CONFIG_SETUP_MEMORY_TAGS 1
140 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
141 /* #define CONFIG_INITRD_TAG 1 */
143 #if defined(CONFIG_CMD_KGDB)
144 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
145 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
149 * Miscellaneous configurable options
151 #define CONFIG_SYS_HUSH_PARSER 1
152 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
154 #define CONFIG_SYS_LONGHELP /* undef to save memory */
155 #ifdef CONFIG_SYS_HUSH_PARSER
156 #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
158 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
160 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
161 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
162 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
163 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
164 #define CONFIG_SYS_DEVICE_NULLDEV 1
166 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
167 #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
169 #define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
171 #define CONFIG_SYS_HZ 1000
172 #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
174 /* valid baudrates */
175 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
178 #define CONFIG_PXA_MMC
179 #define CONFIG_CMD_MMC
180 #define CONFIG_SYS_MMC_BASE 0xF0000000
186 * The stack sizes are set up in start.S using the settings below
188 #define CONFIG_STACKSIZE (128*1024) /* regular stack */
189 #ifdef CONFIG_USE_IRQ
190 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
191 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
195 * Physical Memory Map
197 #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
198 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
199 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
200 #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
201 #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
202 #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
203 #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
204 #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
205 #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
207 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
209 #define CONFIG_SYS_DRAM_BASE 0xa0000000
210 #define CONFIG_SYS_DRAM_SIZE 0x04000000
212 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
217 #define CONFIG_SYS_GPSR0_VAL 0x00018000
218 #define CONFIG_SYS_GPSR1_VAL 0x00000000
219 #define CONFIG_SYS_GPSR2_VAL 0x400dc000
220 #define CONFIG_SYS_GPSR3_VAL 0x00000000
221 #define CONFIG_SYS_GPCR0_VAL 0x00000000
222 #define CONFIG_SYS_GPCR1_VAL 0x00000000
223 #define CONFIG_SYS_GPCR2_VAL 0x00000000
224 #define CONFIG_SYS_GPCR3_VAL 0x00000000
225 #define CONFIG_SYS_GPDR0_VAL 0x00018000
226 #define CONFIG_SYS_GPDR1_VAL 0x00028801
227 #define CONFIG_SYS_GPDR2_VAL 0x520dc000
228 #define CONFIG_SYS_GPDR3_VAL 0x0001E000
229 #define CONFIG_SYS_GAFR0_L_VAL 0x801c0000
230 #define CONFIG_SYS_GAFR0_U_VAL 0x00000013
231 #define CONFIG_SYS_GAFR1_L_VAL 0x6990100A
232 #define CONFIG_SYS_GAFR1_U_VAL 0x00000008
233 #define CONFIG_SYS_GAFR2_L_VAL 0xA0000000
234 #define CONFIG_SYS_GAFR2_U_VAL 0x010900F2
235 #define CONFIG_SYS_GAFR3_L_VAL 0x54000003
236 #define CONFIG_SYS_GAFR3_U_VAL 0x00002401
237 #define CONFIG_SYS_GRER0_VAL 0x00000000
238 #define CONFIG_SYS_GRER1_VAL 0x00000000
239 #define CONFIG_SYS_GRER2_VAL 0x00000000
240 #define CONFIG_SYS_GRER3_VAL 0x00000000
241 #define CONFIG_SYS_GFER0_VAL 0x00000000
242 #define CONFIG_SYS_GFER1_VAL 0x00000000
243 #define CONFIG_SYS_GFER2_VAL 0x00000000
244 #define CONFIG_SYS_GFER3_VAL 0x00000020
247 #define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */
252 #define CONFIG_SYS_CKEN 0x01FFFFFF /* CHECK */
253 #define CONFIG_SYS_CCCR 0x02000290 /* 520Mhz */
259 #define CONFIG_SYS_MSC0_VAL 0x4df84df0
260 #define CONFIG_SYS_MSC1_VAL 0x7ff87ff4
261 #define CONFIG_SYS_MSC2_VAL 0xa26936d4
262 #define CONFIG_SYS_MDCNFG_VAL 0x880009C9
263 #define CONFIG_SYS_MDREFR_VAL 0x20ca201e
264 #define CONFIG_SYS_MDMRS_VAL 0x00220022
266 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000
267 #define CONFIG_SYS_SXCNFG_VAL 0x40044004
270 * PCMCIA and CF Interfaces
272 #define CONFIG_SYS_MECR_VAL 0x00000001
273 #define CONFIG_SYS_MCMEM0_VAL 0x00004204
274 #define CONFIG_SYS_MCMEM1_VAL 0x00010204
275 #define CONFIG_SYS_MCATT0_VAL 0x00010504
276 #define CONFIG_SYS_MCATT1_VAL 0x00010504
277 #define CONFIG_SYS_MCIO0_VAL 0x00008407
278 #define CONFIG_SYS_MCIO1_VAL 0x0000c108
280 #define CONFIG_DRIVER_DM9000 1
281 #define CONFIG_DM9000_BASE 0x08000000
282 #define DM9000_IO CONFIG_DM9000_BASE
283 #define DM9000_DATA (CONFIG_DM9000_BASE+0x8004)
285 #define CONFIG_USB_OHCI_NEW 1
286 #define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
287 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
288 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
289 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "trizepsiv"
290 #define CONFIG_USB_STORAGE 1
291 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1
294 * FLASH and environment organization
297 #define CONFIG_SYS_FLASH_CFI
298 #define CONFIG_FLASH_CFI_DRIVER 1
300 #define CONFIG_SYS_MONITOR_BASE 0
301 #define CONFIG_SYS_MONITOR_LEN 0x40000
303 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
304 #define CONFIG_SYS_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
306 /* timeout values are in ticks */
307 #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
308 #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
310 /* write flash less slowly */
311 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
313 /* Flash environment locations */
314 #define CONFIG_ENV_IS_IN_FLASH 1
315 #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector */
316 #define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment */
317 #define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
319 /* Address and size of Redundant Environment Sector */
320 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
321 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
323 #endif /* __CONFIG_H */