2 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Configuration settings for the Freescale Vybrid vf610twr board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/imx-regs.h>
13 #include <config_cmd_default.h>
16 #define CONFIG_SYS_GENERIC_BOARD
17 #define CONFIG_DISPLAY_CPUINFO
18 #define CONFIG_DISPLAY_BOARDINFO
20 #define CONFIG_MACH_TYPE 4146
22 #define CONFIG_SKIP_LOWLEVEL_INIT
24 /* Enable passing of ATAGs */
25 #define CONFIG_CMDLINE_TAG
27 #define CONFIG_CMD_FUSE
28 #ifdef CONFIG_CMD_FUSE
29 #define CONFIG_MXC_OCOTP
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
35 #define CONFIG_BOARD_EARLY_INIT_F
37 #define CONFIG_FSL_LPUART
38 #define LPUART_BASE UART1_BASE
40 /* Allow to overwrite serial and ethaddr */
41 #define CONFIG_ENV_OVERWRITE
42 #define CONFIG_SYS_UART_PORT (1)
43 #define CONFIG_BAUDRATE 115200
45 #undef CONFIG_CMD_IMLS
48 #define CONFIG_CMD_NAND
49 #define CONFIG_CMD_NAND_TRIMFFS
51 #ifdef CONFIG_CMD_NAND
52 #define CONFIG_NAND_VF610_NFC
53 #define CONFIG_SYS_NAND_SELF_INIT
54 #define CONFIG_USE_ARCH_MEMCPY
55 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
56 #define CONFIG_SYS_MAX_NAND_DEVICE 1
57 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
60 #define CONFIG_CMD_UBI
61 #define CONFIG_CMD_UBIFS
65 /* Dynamic MTD partition support */
66 #define CONFIG_CMD_MTDPARTS
67 #define CONFIG_MTD_PARTITIONS
68 #define CONFIG_MTD_DEVICE
69 #define MTDIDS_DEFAULT "nand0=fsl_nfc"
70 #define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
80 #define CONFIG_FSL_ESDHC
81 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
82 #define CONFIG_SYS_FSL_ESDHC_NUM 1
84 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
86 #define CONFIG_CMD_MMC
87 #define CONFIG_GENERIC_MMC
88 #define CONFIG_CMD_FAT
89 #define CONFIG_DOS_PARTITION
91 #define CONFIG_CMD_PING
92 #define CONFIG_CMD_DHCP
93 #define CONFIG_CMD_MII
94 #define CONFIG_CMD_NET
95 #define CONFIG_FEC_MXC
97 #define IMX_FEC_BASE ENET_BASE_ADDR
98 #define CONFIG_FEC_XCV_TYPE RMII
99 #define CONFIG_FEC_MXC_PHYADDR 0
100 #define CONFIG_PHYLIB
101 #define CONFIG_PHY_MICREL
104 #define CONFIG_FSL_QSPI
106 #ifdef CONFIG_FSL_QSPI
107 #define CONFIG_CMD_SF
108 #define CONFIG_SPI_FLASH
109 #define CONFIG_SPI_FLASH_SPANSION
110 #define FSL_QSPI_FLASH_SIZE (1 << 24)
111 #define FSL_QSPI_FLASH_NUM 2
112 #define CONFIG_SYS_FSL_QSPI_LE
116 #define CONFIG_CMD_I2C
117 #define CONFIG_SYS_I2C
118 #define CONFIG_SYS_I2C_MXC
119 #define CONFIG_SYS_SPD_BUS_NUM 0
121 #define CONFIG_BOOTDELAY 3
123 #define CONFIG_LOADADDR 0x82000000
125 /* We boot from the gfxRAM area of the OCRAM. */
126 #define CONFIG_SYS_TEXT_BASE 0x3f408000
127 #define CONFIG_BOARD_SIZE_LIMIT 524288
129 #define CONFIG_EXTRA_ENV_SETTINGS \
130 "script=boot.scr\0" \
133 "fdt_high=0xffffffff\0" \
134 "initrd_high=0xffffffff\0" \
135 "fdt_file=vf610-twr.dtb\0" \
136 "fdt_addr=0x81000000\0" \
139 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
141 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
142 "update_sd_firmware_filename=u-boot.imx\0" \
143 "update_sd_firmware=" \
144 "if test ${ip_dyn} = yes; then " \
145 "setenv get_cmd dhcp; " \
147 "setenv get_cmd tftp; " \
149 "if mmc dev ${mmcdev}; then " \
150 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
151 "setexpr fw_sz ${filesize} / 0x200; " \
152 "setexpr fw_sz ${fw_sz} + 1; " \
153 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
156 "mmcargs=setenv bootargs console=${console},${baudrate} " \
157 "root=${mmcroot}\0" \
159 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
160 "bootscript=echo Running bootscript from mmc ...; " \
162 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
163 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
164 "mmcboot=echo Booting from mmc ...; " \
166 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
167 "if run loadfdt; then " \
168 "bootz ${loadaddr} - ${fdt_addr}; " \
170 "if test ${boot_fdt} = try; then " \
173 "echo WARN: Cannot load the DT; " \
179 "netargs=setenv bootargs console=${console},${baudrate} " \
181 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
182 "netboot=echo Booting from net ...; " \
184 "if test ${ip_dyn} = yes; then " \
185 "setenv get_cmd dhcp; " \
187 "setenv get_cmd tftp; " \
189 "${get_cmd} ${image}; " \
190 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
191 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
192 "bootz ${loadaddr} - ${fdt_addr}; " \
194 "if test ${boot_fdt} = try; then " \
197 "echo WARN: Cannot load the DT; " \
204 #define CONFIG_BOOTCOMMAND \
205 "mmc dev ${mmcdev}; if mmc rescan; then " \
206 "if run loadbootscript; then " \
209 "if run loadimage; then " \
211 "else run netboot; " \
214 "else run netboot; fi"
216 /* Miscellaneous configurable options */
217 #define CONFIG_SYS_LONGHELP /* undef to save memory */
218 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
219 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
220 #undef CONFIG_AUTO_COMPLETE
221 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
222 #define CONFIG_SYS_PBSIZE \
223 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
224 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
225 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
227 #define CONFIG_CMD_MEMTEST
228 #define CONFIG_SYS_MEMTEST_START 0x80010000
229 #define CONFIG_SYS_MEMTEST_END 0x87C00000
231 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
235 * The stack sizes are set up in start.S using the settings below
237 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
239 /* Physical memory map */
240 #define CONFIG_NR_DRAM_BANKS 1
241 #define PHYS_SDRAM (0x80000000)
242 #define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
244 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
245 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
246 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
248 #define CONFIG_SYS_INIT_SP_OFFSET \
249 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
250 #define CONFIG_SYS_INIT_SP_ADDR \
251 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
253 /* FLASH and environment organization */
254 #define CONFIG_SYS_NO_FLASH
256 #ifdef CONFIG_ENV_IS_IN_MMC
257 #define CONFIG_ENV_SIZE (8 * 1024)
259 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
260 #define CONFIG_SYS_MMC_ENV_DEV 0
263 #ifdef CONFIG_ENV_IS_IN_NAND
264 #define CONFIG_ENV_SIZE (64 * 2048)
265 #define CONFIG_ENV_SECT_SIZE (64 * 2048)
266 #define CONFIG_ENV_RANGE (512 * 1024)
267 #define CONFIG_ENV_OFFSET 0x180000
270 #define CONFIG_OF_LIBFDT
271 #define CONFIG_CMD_BOOTZ