include/configs/vpac270.h

   1 /*
   2  * Voipac PXA270 configuration file
   3  *
   4  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Board Configuration Options
  14  */
  15 #define CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
  16 #define CONFIG_VPAC270          1       /* Voipac PXA270 board */
  17 #define CONFIG_SYS_TEXT_BASE    0xa0000000
  18
  19 #ifdef  CONFIG_ONENAND
  20 #define CONFIG_SPL
  21 #define CONFIG_SPL_ONENAND_SUPPORT
  22 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x2000
  23 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
  24         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
  25 #define CONFIG_SPL_TEXT_BASE    0x5c000000
  26 #define CONFIG_SPL_LDSCRIPT     "board/vpac270/u-boot-spl.lds"
  27 #endif
  28
  29 /*
  30  * Environment settings
  31  */
  32 #define CONFIG_ENV_OVERWRITE
  33 #define CONFIG_SYS_MALLOC_LEN           (128*1024)
  34 #define CONFIG_ARCH_CPU_INIT
  35 #define CONFIG_BOOTCOMMAND                                              \
  36         "if mmc init && fatload mmc 0 0xa4000000 uImage; then "         \
  37                 "bootm 0xa4000000; "                                    \
  38         "fi; "                                                          \
  39         "if usb reset && fatload usb 0 0xa4000000 uImage; then "        \
  40                 "bootm 0xa4000000; "                                    \
  41         "fi; "                                                          \
  42         "if ide reset && fatload ide 0 0xa4000000 uImage; then "        \
  43                 "bootm 0xa4000000; "                                    \
  44         "fi; "                                                          \
  45         "bootm 0x60000;"
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  48         "update_onenand="                                               \
  49                 "onenand erase 0x0 0x80000 ; "                          \
  50                 "onenand write 0xa0000000 0x0 0x80000"
  51
  52 #define CONFIG_BOOTARGS                 "console=tty0 console=ttyS0,115200"
  53 #define CONFIG_TIMESTAMP
  54 #define CONFIG_BOOTDELAY                2       /* Autoboot delay */
  55 #define CONFIG_CMDLINE_TAG
  56 #define CONFIG_SETUP_MEMORY_TAGS
  57 #define CONFIG_LZMA                     /* LZMA compression support */
  58 #define CONFIG_OF_LIBFDT
  59
  60 /*
  61  * Serial Console Configuration
  62  */
  63 #define CONFIG_PXA_SERIAL
  64 #define CONFIG_FFUART                   1
  65 #define CONFIG_CONS_INDEX               3
  66 #define CONFIG_BAUDRATE                 115200
  67
  68 /*
  69  * Bootloader Components Configuration
  70  */
  71 #include <config_cmd_default.h>
  72
  73 #define CONFIG_CMD_NET
  74 #define CONFIG_CMD_ENV
  75 #undef  CONFIG_CMD_IMLS
  76 #define CONFIG_CMD_MMC
  77 #define CONFIG_CMD_USB
  78 #undef  CONFIG_LCD
  79 #define CONFIG_CMD_IDE
  80
  81 #ifdef  CONFIG_ONENAND
  82 #undef  CONFIG_CMD_FLASH
  83 #define CONFIG_CMD_ONENAND
  84 #else
  85 #define CONFIG_CMD_FLASH
  86 #undef  CONFIG_CMD_ONENAND
  87 #endif
  88
  89 /*
  90  * Networking Configuration
  91  *  chip on the Voipac PXA270 board
  92  */
  93 #ifdef  CONFIG_CMD_NET
  94 #define CONFIG_CMD_PING
  95 #define CONFIG_CMD_DHCP
  96
  97 #define CONFIG_DRIVER_DM9000            1
  98 #define CONFIG_DM9000_BASE              0x08000300      /* CS2 */
  99 #define DM9000_IO                       (CONFIG_DM9000_BASE)
 100 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 101 #define CONFIG_NET_RETRY_COUNT          10
 102
 103 #define CONFIG_BOOTP_BOOTFILESIZE
 104 #define CONFIG_BOOTP_BOOTPATH
 105 #define CONFIG_BOOTP_GATEWAY
 106 #define CONFIG_BOOTP_HOSTNAME
 107 #endif
 108
 109 /*
 110  * MMC Card Configuration
 111  */
 112 #ifdef  CONFIG_CMD_MMC
 113 #define CONFIG_MMC
 114 #define CONFIG_GENERIC_MMC
 115 #define CONFIG_PXA_MMC_GENERIC
 116 #define CONFIG_SYS_MMC_BASE             0xF0000000
 117 #define CONFIG_CMD_FAT
 118 #define CONFIG_CMD_EXT2
 119 #define CONFIG_DOS_PARTITION
 120 #endif
 121
 122 /*
 123  * KGDB
 124  */
 125 #ifdef  CONFIG_CMD_KGDB
 126 #define CONFIG_KGDB_BAUDRATE            230400  /* kgdb serial port speed */
 127 #define CONFIG_KGDB_SER_INDEX           2       /* which serial port to use */
 128 #endif
 129
 130 /*
 131  * HUSH Shell Configuration
 132  */
 133 #define CONFIG_SYS_HUSH_PARSER          1
 134
 135 #define CONFIG_SYS_LONGHELP
 136 #ifdef  CONFIG_SYS_HUSH_PARSER
 137 #define CONFIG_SYS_PROMPT               "$ "
 138 #else
 139 #endif
 140 #define CONFIG_SYS_CBSIZE               256
 141 #define CONFIG_SYS_PBSIZE               \
 142         (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 143 #define CONFIG_SYS_MAXARGS              16
 144 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 145 #define CONFIG_SYS_DEVICE_NULLDEV       1
 146 #define CONFIG_CMDLINE_EDITING          1
 147 #define CONFIG_AUTO_COMPLETE            1
 148
 149 /*
 150  * Clock Configuration
 151  */
 152 #define CONFIG_SYS_HZ                   1000            /* Timer @ 3250000 Hz */
 153 #define CONFIG_SYS_CPUSPEED             0x190           /* 312MHz */
 154
 155
 156 /*
 157  * DRAM Map
 158  */
 159 #define CONFIG_NR_DRAM_BANKS            2               /* 2 banks of DRAM */
 160 #define PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
 161 #define PHYS_SDRAM_1_SIZE               0x08000000      /* 128 MB */
 162
 163 #ifdef  CONFIG_RAM_256M
 164 #define PHYS_SDRAM_2                    0x80000000      /* SDRAM Bank #2 */
 165 #define PHYS_SDRAM_2_SIZE               0x08000000      /* 128 MB */
 166 #endif
 167
 168 #define CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
 169 #ifdef  CONFIG_RAM_256M
 170 #define CONFIG_SYS_DRAM_SIZE            0x10000000      /* 256 MB DRAM */
 171 #else
 172 #define CONFIG_SYS_DRAM_SIZE            0x08000000      /* 128 MB DRAM */
 173 #endif
 174
 175 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on */
 176 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM */
 177
 178 #define CONFIG_SYS_LOAD_ADDR            PHYS_SDRAM_1
 179 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 180 #define CONFIG_SYS_INIT_SP_ADDR         0x5c010000
 181
 182 /*
 183  * NOR FLASH
 184  */
 185 #define CONFIG_SYS_MONITOR_BASE         0x0
 186 #define CONFIG_SYS_MONITOR_LEN          0x80000
 187 #define CONFIG_ENV_ADDR                 \
 188                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 189 #define CONFIG_ENV_SIZE                 0x20000
 190 #define CONFIG_ENV_SECT_SIZE            0x20000
 191
 192 #if     defined(CONFIG_CMD_FLASH)       /* NOR */
 193 #define PHYS_FLASH_1                    0x00000000      /* Flash Bank #1 */
 194
 195 #ifdef  CONFIG_RAM_256M
 196 #define PHYS_FLASH_2                    0x02000000      /* Flash Bank #2 */
 197 #endif
 198
 199 #define CONFIG_SYS_FLASH_CFI
 200 #define CONFIG_FLASH_CFI_DRIVER         1
 201
 202 #define CONFIG_SYS_MAX_FLASH_SECT       (4 + 255)
 203 #ifdef  CONFIG_RAM_256M
 204 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 205 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, PHYS_FLASH_2 }
 206 #else
 207 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 208 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 209 #endif
 210
 211 #define CONFIG_SYS_FLASH_ERASE_TOUT     (25*CONFIG_SYS_HZ)
 212 #define CONFIG_SYS_FLASH_WRITE_TOUT     (25*CONFIG_SYS_HZ)
 213
 214 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 215 #define CONFIG_SYS_FLASH_PROTECTION             1
 216
 217 #define CONFIG_ENV_IS_IN_FLASH          1
 218
 219 #elif   defined(CONFIG_CMD_ONENAND)     /* OneNAND */
 220 #define CONFIG_SYS_NO_FLASH
 221 #define CONFIG_SYS_ONENAND_BASE         0x00000000
 222
 223 #define CONFIG_ENV_IS_IN_ONENAND        1
 224
 225 #else   /* No flash */
 226 #define CONFIG_SYS_NO_FLASH
 227 #define CONFIG_SYS_ENV_IS_NOWHERE
 228 #endif
 229
 230 /*
 231  * IDE
 232  */
 233 #ifdef  CONFIG_CMD_IDE
 234 #define CONFIG_LBA48
 235 #undef  CONFIG_IDE_LED
 236 #undef  CONFIG_IDE_RESET
 237
 238 #define __io
 239
 240 #define CONFIG_SYS_IDE_MAXBUS           1
 241 #define CONFIG_SYS_IDE_MAXDEVICE        1
 242
 243 #define CONFIG_SYS_ATA_BASE_ADDR        0x0c000000
 244 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0
 245
 246 #define CONFIG_SYS_ATA_DATA_OFFSET      0x120
 247 #define CONFIG_SYS_ATA_REG_OFFSET       0x120
 248 #define CONFIG_SYS_ATA_ALT_OFFSET       0x120
 249
 250 #define CONFIG_SYS_ATA_STRIDE           2
 251 #endif
 252
 253 /*
 254  * GPIO settings
 255  */
 256 #define CONFIG_SYS_GPSR0_VAL    0x01308800
 257 #define CONFIG_SYS_GPSR1_VAL    0x00cf0000
 258 #define CONFIG_SYS_GPSR2_VAL    0x922ac000
 259 #define CONFIG_SYS_GPSR3_VAL    0x0161e800
 260
 261 #define CONFIG_SYS_GPCR0_VAL    0x00010000
 262 #define CONFIG_SYS_GPCR1_VAL    0x0
 263 #define CONFIG_SYS_GPCR2_VAL    0x0
 264 #define CONFIG_SYS_GPCR3_VAL    0x0
 265
 266 #define CONFIG_SYS_GPDR0_VAL    0xcbb18800
 267 #define CONFIG_SYS_GPDR1_VAL    0xfccfa981
 268 #define CONFIG_SYS_GPDR2_VAL    0x922affff
 269 #define CONFIG_SYS_GPDR3_VAL    0x0161e904
 270
 271 #define CONFIG_SYS_GAFR0_L_VAL  0x00100000
 272 #define CONFIG_SYS_GAFR0_U_VAL  0xa5da8510
 273 #define CONFIG_SYS_GAFR1_L_VAL  0x6992901a
 274 #define CONFIG_SYS_GAFR1_U_VAL  0xaaa5a0aa
 275 #define CONFIG_SYS_GAFR2_L_VAL  0xaaaaaaaa
 276 #define CONFIG_SYS_GAFR2_U_VAL  0x4109a401
 277 #define CONFIG_SYS_GAFR3_L_VAL  0x54010310
 278 #define CONFIG_SYS_GAFR3_U_VAL  0x00025401
 279
 280 #define CONFIG_SYS_PSSR_VAL     0x30
 281
 282 /*
 283  * Clock settings
 284  */
 285 #define CONFIG_SYS_CKEN         0x00500240
 286 #define CONFIG_SYS_CCCR         0x02000290
 287
 288 /*
 289  * Memory settings
 290  */
 291 #define CONFIG_SYS_MSC0_VAL     0x3ffc95fa
 292 #define CONFIG_SYS_MSC1_VAL     0x02ccf974
 293 #define CONFIG_SYS_MSC2_VAL     0x00000000
 294 #ifdef  CONFIG_RAM_256M
 295 #define CONFIG_SYS_MDCNFG_VAL   0x8ad30ad3
 296 #else
 297 #define CONFIG_SYS_MDCNFG_VAL   0x88000ad3
 298 #endif
 299 #define CONFIG_SYS_MDREFR_VAL   0x201fe01e
 300 #define CONFIG_SYS_MDMRS_VAL    0x00000000
 301 #define CONFIG_SYS_FLYCNFG_VAL  0x00000000
 302 #define CONFIG_SYS_SXCNFG_VAL   0x40044004
 303 #define CONFIG_SYS_MEM_BUF_IMP  0x0f
 304
 305 /*
 306  * PCMCIA and CF Interfaces
 307  */
 308 #define CONFIG_SYS_MECR_VAL     0x00000001
 309 #define CONFIG_SYS_MCMEM0_VAL   0x00014307
 310 #define CONFIG_SYS_MCMEM1_VAL   0x00014307
 311 #define CONFIG_SYS_MCATT0_VAL   0x0001c787
 312 #define CONFIG_SYS_MCATT1_VAL   0x0001c787
 313 #define CONFIG_SYS_MCIO0_VAL    0x0001430f
 314 #define CONFIG_SYS_MCIO1_VAL    0x0001430f
 315
 316 /*
 317  * LCD
 318  */
 319 #ifdef  CONFIG_LCD
 320 #define CONFIG_VOIPAC_LCD
 321 #endif
 322
 323 /*
 324  * USB
 325  */
 326 #ifdef  CONFIG_CMD_USB
 327 #define CONFIG_USB_OHCI_NEW
 328 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 329 #define CONFIG_SYS_USB_OHCI_BOARD_INIT
 330 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 331 #define CONFIG_SYS_USB_OHCI_REGS_BASE   0x4C000000
 332 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "vpac270"
 333 #define CONFIG_USB_STORAGE
 334 #endif
 335
 336 #endif  /* __CONFIG_H */