Linux 4.11-rc4

[karo-tx-linux.git] / include / drm / drm_connector.h

/*
 * Copyright (c) 2016 Intel Corporation
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 */

#ifndef __DRM_CONNECTOR_H__
#define __DRM_CONNECTOR_H__

#include <linux/list.h>
#include <linux/ctype.h>
#include <drm/drm_mode_object.h>

#include <uapi/drm/drm_mode.h>

struct drm_device;

struct drm_connector_helper_funcs;
struct drm_device;
struct drm_crtc;
struct drm_encoder;
struct drm_property;
struct drm_property_blob;
struct drm_printer;
struct edid;

enum drm_connector_force {
        DRM_FORCE_UNSPECIFIED,
        DRM_FORCE_OFF,
        DRM_FORCE_ON,         /* force on analog part normally */
        DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
};

/**
 * enum drm_connector_status - status for a &drm_connector
 *
 * This enum is used to track the connector status. There are no separate
 * #defines for the uapi!
 */
enum drm_connector_status {
        /**
         * @connector_status_connected: The connector is definitely connected to
         * a sink device, and can be enabled.
         */
        connector_status_connected = 1,
        /**
         * @connector_status_disconnected: The connector isn't connected to a
         * sink device which can be autodetect. For digital outputs like DP or
         * HDMI (which can be realiable probed) this means there's really
         * nothing there. It is driver-dependent whether a connector with this
         * status can be lit up or not.
         */
        connector_status_disconnected = 2,
        /**
         * @connector_status_unknown: The connector's status could not be
         * reliably detected. This happens when probing would either cause
         * flicker (like load-detection when the connector is in use), or when a
         * hardware resource isn't available (like when load-detection needs a
         * free CRTC). It should be possible to light up the connector with one
         * of the listed fallback modes. For default configuration userspace
         * should only try to light up connectors with unknown status when
         * there's not connector with @connector_status_connected.
         */
        connector_status_unknown = 3,
};

enum subpixel_order {
        SubPixelUnknown = 0,
        SubPixelHorizontalRGB,
        SubPixelHorizontalBGR,
        SubPixelVerticalRGB,
        SubPixelVerticalBGR,
        SubPixelNone,
};

/**
 * struct drm_display_info - runtime data about the connected sink
 *
 * Describes a given display (e.g. CRT or flat panel) and its limitations. For
 * fixed display sinks like built-in panels there's not much difference between
 * this and &struct drm_connector. But for sinks with a real cable this
 * structure is meant to describe all the things at the other end of the cable.
 *
 * For sinks which provide an EDID this can be filled out by calling
 * drm_add_edid_modes().
 */
struct drm_display_info {
        /**
         * @name: Name of the display.
         */
        char name[DRM_DISPLAY_INFO_LEN];

        /**
         * @width_mm: Physical width in mm.
         */
        unsigned int width_mm;
        /**
         * @height_mm: Physical height in mm.
         */
        unsigned int height_mm;

        /**
         * @pixel_clock: Maximum pixel clock supported by the sink, in units of
         * 100Hz. This mismatches the clock in &drm_display_mode (which is in
         * kHZ), because that's what the EDID uses as base unit.
         */
        unsigned int pixel_clock;
        /**
         * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
         */
        unsigned int bpc;

        /**
         * @subpixel_order: Subpixel order of LCD panels.
         */
        enum subpixel_order subpixel_order;

#define DRM_COLOR_FORMAT_RGB444         (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444       (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422       (1<<2)

        /**
         * @color_formats: HDMI Color formats, selects between RGB and YCrCb
         * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
         * as used to describe the pixel format in framebuffers, and also don't
         * match the formats in @bus_formats which are shared with v4l.
         */
        u32 color_formats;

        /**
         * @bus_formats: Pixel data format on the wire, somewhat redundant with
         * @color_formats. Array of size @num_bus_formats encoded using
         * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
         */
        const u32 *bus_formats;
        /**
         * @num_bus_formats: Size of @bus_formats array.
         */
        unsigned int num_bus_formats;

#define DRM_BUS_FLAG_DE_LOW             (1<<0)
#define DRM_BUS_FLAG_DE_HIGH            (1<<1)
/* drive data on pos. edge */
#define DRM_BUS_FLAG_PIXDATA_POSEDGE    (1<<2)
/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE    (1<<3)

        /**
         * @bus_flags: Additional information (like pixel signal polarity) for
         * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
         */
        u32 bus_flags;

        /**
         * @max_tmds_clock: Maximum TMDS clock rate supported by the
         * sink in kHz. 0 means undefined.
         */
        int max_tmds_clock;

        /**
         * @dvi_dual: Dual-link DVI sink?
         */
        bool dvi_dual;

        /**
         * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even
         * more stuff redundant with @bus_formats.
         */
        u8 edid_hdmi_dc_modes;

        /**
         * @cea_rev: CEA revision of the HDMI sink.
         */
        u8 cea_rev;
};

int drm_display_info_set_bus_formats(struct drm_display_info *info,
                                     const u32 *formats,
                                     unsigned int num_formats);

/**
 * struct drm_tv_connector_state - TV connector related states
 * @subconnector: selected subconnector
 * @margins: left/right/top/bottom margins
 * @mode: TV mode
 * @brightness: brightness in percent
 * @contrast: contrast in percent
 * @flicker_reduction: flicker reduction in percent
 * @overscan: overscan in percent
 * @saturation: saturation in percent
 * @hue: hue in percent
 */
struct drm_tv_connector_state {
        enum drm_mode_subconnector subconnector;
        struct {
                unsigned int left;
                unsigned int right;
                unsigned int top;
                unsigned int bottom;
        } margins;
        unsigned int mode;
        unsigned int brightness;
        unsigned int contrast;
        unsigned int flicker_reduction;
        unsigned int overscan;
        unsigned int saturation;
        unsigned int hue;
};

/**
 * struct drm_connector_state - mutable connector state
 * @connector: backpointer to the connector
 * @best_encoder: can be used by helpers and drivers to select the encoder
 * @state: backpointer to global drm_atomic_state
 * @tv: TV connector state
 */
struct drm_connector_state {
        struct drm_connector *connector;

        /**
         * @crtc: CRTC to connect connector to, NULL if disabled.
         *
         * Do not change this directly, use drm_atomic_set_crtc_for_connector()
         * instead.
         */
        struct drm_crtc *crtc;

        struct drm_encoder *best_encoder;

        struct drm_atomic_state *state;

        struct drm_tv_connector_state tv;
};

/**
 * struct drm_connector_funcs - control connectors on a given device
 *
 * Each CRTC may have one or more connectors attached to it.  The functions
 * below allow the core DRM code to control connectors, enumerate available modes,
 * etc.
 */
struct drm_connector_funcs {
        /**
         * @dpms:
         *
         * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
         * is exposed as a standard property on the connector, but diverted to
         * this callback in the drm core. Note that atomic drivers don't
         * implement the 4 level DPMS support on the connector any more, but
         * instead only have an on/off "ACTIVE" property on the CRTC object.
         *
         * Drivers implementing atomic modeset should use
         * drm_atomic_helper_connector_dpms() to implement this hook.
         *
         * RETURNS:
         *
         * 0 on success or a negative error code on failure.
         */
        int (*dpms)(struct drm_connector *connector, int mode);

        /**
         * @reset:
         *
         * Reset connector hardware and software state to off. This function isn't
         * called by the core directly, only through drm_mode_config_reset().
         * It's not a helper hook only for historical reasons.
         *
         * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
         * atomic state using this hook.
         */
        void (*reset)(struct drm_connector *connector);

        /**
         * @detect:
         *
         * Check to see if anything is attached to the connector. The parameter
         * force is set to false whilst polling, true when checking the
         * connector due to a user request. force can be used by the driver to
         * avoid expensive, destructive operations during automated probing.
         *
         * This callback is optional, if not implemented the connector will be
         * considered as always being attached.
         *
         * FIXME:
         *
         * Note that this hook is only called by the probe helper. It's not in
         * the helper library vtable purely for historical reasons. The only DRM
         * core entry point to probe connector state is @fill_modes.
         *
         * RETURNS:
         *
         * drm_connector_status indicating the connector's status.
         */
        enum drm_connector_status (*detect)(struct drm_connector *connector,
                                            bool force);

        /**
         * @force:
         *
         * This function is called to update internal encoder state when the
         * connector is forced to a certain state by userspace, either through
         * the sysfs interfaces or on the kernel cmdline. In that case the
         * @detect callback isn't called.
         *
         * FIXME:
         *
         * Note that this hook is only called by the probe helper. It's not in
         * the helper library vtable purely for historical reasons. The only DRM
         * core entry point to probe connector state is @fill_modes.
         */
        void (*force)(struct drm_connector *connector);

        /**
         * @fill_modes:
         *
         * Entry point for output detection and basic mode validation. The
         * driver should reprobe the output if needed (e.g. when hotplug
         * handling is unreliable), add all detected modes to &drm_connector.modes
         * and filter out any the device can't support in any configuration. It
         * also needs to filter out any modes wider or higher than the
         * parameters max_width and max_height indicate.
         *
         * The drivers must also prune any modes no longer valid from
         * &drm_connector.modes. Furthermore it must update
         * &drm_connector.status and &drm_connector.edid.  If no EDID has been
         * received for this output connector->edid must be NULL.
         *
         * Drivers using the probe helpers should use
         * drm_helper_probe_single_connector_modes() or
         * drm_helper_probe_single_connector_modes_nomerge() to implement this
         * function.
         *
         * RETURNS:
         *
         * The number of modes detected and filled into &drm_connector.modes.
         */
        int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);

        /**
         * @set_property:
         *
         * This is the legacy entry point to update a property attached to the
         * connector.
         *
         * Drivers implementing atomic modeset should use
         * drm_atomic_helper_connector_set_property() to implement this hook.
         *
         * This callback is optional if the driver does not support any legacy
         * driver-private properties.
         *
         * RETURNS:
         *
         * 0 on success or a negative error code on failure.
         */
        int (*set_property)(struct drm_connector *connector, struct drm_property *property,
                             uint64_t val);

        /**
         * @late_register:
         *
         * This optional hook can be used to register additional userspace
         * interfaces attached to the connector, light backlight control, i2c,
         * DP aux or similar interfaces. It is called late in the driver load
         * sequence from drm_connector_register() when registering all the
         * core drm connector interfaces. Everything added from this callback
         * should be unregistered in the early_unregister callback.
         *
         * This is called while holding &drm_connector.mutex.
         *
         * Returns:
         *
         * 0 on success, or a negative error code on failure.
         */
        int (*late_register)(struct drm_connector *connector);

        /**
         * @early_unregister:
         *
         * This optional hook should be used to unregister the additional
         * userspace interfaces attached to the connector from
         * late_register(). It is called from drm_connector_unregister(),
         * early in the driver unload sequence to disable userspace access
         * before data structures are torndown.
         *
         * This is called while holding &drm_connector.mutex.
         */
        void (*early_unregister)(struct drm_connector *connector);

        /**
         * @destroy:
         *
         * Clean up connector resources. This is called at driver unload time
         * through drm_mode_config_cleanup(). It can also be called at runtime
         * when a connector is being hot-unplugged for drivers that support
         * connector hotplugging (e.g. DisplayPort MST).
         */
        void (*destroy)(struct drm_connector *connector);

        /**
         * @atomic_duplicate_state:
         *
         * Duplicate the current atomic state for this connector and return it.
         * The core and helpers guarantee that any atomic state duplicated with
         * this hook and still owned by the caller (i.e. not transferred to the
         * driver by calling &drm_mode_config_funcs.atomic_commit) will be
         * cleaned up by calling the @atomic_destroy_state hook in this
         * structure.
         *
         * Atomic drivers which don't subclass &struct drm_connector_state should use
         * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
         * state structure to extend it with driver-private state should use
         * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
         * duplicated in a consistent fashion across drivers.
         *
         * It is an error to call this hook before &drm_connector.state has been
         * initialized correctly.
         *
         * NOTE:
         *
         * If the duplicate state references refcounted resources this hook must
         * acquire a reference for each of them. The driver must release these
         * references again in @atomic_destroy_state.
         *
         * RETURNS:
         *
         * Duplicated atomic state or NULL when the allocation failed.
         */
        struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);

        /**
         * @atomic_destroy_state:
         *
         * Destroy a state duplicated with @atomic_duplicate_state and release
         * or unreference all resources it references
         */
        void (*atomic_destroy_state)(struct drm_connector *connector,
                                     struct drm_connector_state *state);

        /**
         * @atomic_set_property:
         *
         * Decode a driver-private property value and store the decoded value
         * into the passed-in state structure. Since the atomic core decodes all
         * standardized properties (even for extensions beyond the core set of
         * properties which might not be implemented by all drivers) this
         * requires drivers to subclass the state structure.
         *
         * Such driver-private properties should really only be implemented for
         * truly hardware/vendor specific state. Instead it is preferred to
         * standardize atomic extension and decode the properties used to expose
         * such an extension in the core.
         *
         * Do not call this function directly, use
         * drm_atomic_connector_set_property() instead.
         *
         * This callback is optional if the driver does not support any
         * driver-private atomic properties.
         *
         * NOTE:
         *
         * This function is called in the state assembly phase of atomic
         * modesets, which can be aborted for any reason (including on
         * userspace's request to just check whether a configuration would be
         * possible). Drivers MUST NOT touch any persistent state (hardware or
         * software) or data structures except the passed in @state parameter.
         *
         * Also since userspace controls in which order properties are set this
         * function must not do any input validation (since the state update is
         * incomplete and hence likely inconsistent). Instead any such input
         * validation must be done in the various atomic_check callbacks.
         *
         * RETURNS:
         *
         * 0 if the property has been found, -EINVAL if the property isn't
         * implemented by the driver (which shouldn't ever happen, the core only
         * asks for properties attached to this connector). No other validation
         * is allowed by the driver. The core already checks that the property
         * value is within the range (integer, valid enum value, ...) the driver
         * set when registering the property.
         */
        int (*atomic_set_property)(struct drm_connector *connector,
                                   struct drm_connector_state *state,
                                   struct drm_property *property,
                                   uint64_t val);

        /**
         * @atomic_get_property:
         *
         * Reads out the decoded driver-private property. This is used to
         * implement the GETCONNECTOR IOCTL.
         *
         * Do not call this function directly, use
         * drm_atomic_connector_get_property() instead.
         *
         * This callback is optional if the driver does not support any
         * driver-private atomic properties.
         *
         * RETURNS:
         *
         * 0 on success, -EINVAL if the property isn't implemented by the
         * driver (which shouldn't ever happen, the core only asks for
         * properties attached to this connector).
         */
        int (*atomic_get_property)(struct drm_connector *connector,
                                   const struct drm_connector_state *state,
                                   struct drm_property *property,
                                   uint64_t *val);

        /**
         * @atomic_print_state:
         *
         * If driver subclasses &struct drm_connector_state, it should implement
         * this optional hook for printing additional driver specific state.
         *
         * Do not call this directly, use drm_atomic_connector_print_state()
         * instead.
         */
        void (*atomic_print_state)(struct drm_printer *p,
                                   const struct drm_connector_state *state);
};

/* mode specified on the command line */
struct drm_cmdline_mode {
        bool specified;
        bool refresh_specified;
        bool bpp_specified;
        int xres, yres;
        int bpp;
        int refresh;
        bool rb;
        bool interlace;
        bool cvt;
        bool margins;
        enum drm_connector_force force;
};

/**
 * struct drm_connector - central DRM connector control structure
 * @dev: parent DRM device
 * @kdev: kernel device for sysfs attributes
 * @attr: sysfs attributes
 * @head: list management
 * @base: base KMS object
 * @name: human readable name, can be overwritten by the driver
 * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
 * @connector_type_id: index into connector type enum
 * @interlace_allowed: can this connector handle interlaced modes?
 * @doublescan_allowed: can this connector handle doublescan?
 * @stereo_allowed: can this connector handle stereo modes?
 * @funcs: connector control functions
 * @edid_blob_ptr: DRM property containing EDID if present
 * @properties: property tracking for this connector
 * @dpms: current dpms state
 * @helper_private: mid-layer private data
 * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
 * @force: a DRM_FORCE_<foo> state for forced mode sets
 * @override_edid: has the EDID been overwritten through debugfs for testing?
 * @encoder_ids: valid encoders for this connector
 * @encoder: encoder driving this connector, if any
 * @eld: EDID-like data, if present
 * @latency_present: AV delay info from ELD, if found
 * @video_latency: video latency info from ELD, if found
 * @audio_latency: audio latency info from ELD, if found
 * @null_edid_counter: track sinks that give us all zeros for the EDID
 * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
 * @edid_corrupt: indicates whether the last read EDID was corrupt
 * @debugfs_entry: debugfs directory for this connector
 * @state: current atomic state for this connector
 * @has_tile: is this connector connected to a tiled monitor
 * @tile_group: tile group for the connected monitor
 * @tile_is_single_monitor: whether the tile is one monitor housing
 * @num_h_tile: number of horizontal tiles in the tile group
 * @num_v_tile: number of vertical tiles in the tile group
 * @tile_h_loc: horizontal location of this tile
 * @tile_v_loc: vertical location of this tile
 * @tile_h_size: horizontal size of this tile.
 * @tile_v_size: vertical size of this tile.
 *
 * Each connector may be connected to one or more CRTCs, or may be clonable by
 * another connector if they can share a CRTC.  Each connector also has a specific
 * position in the broader display (referred to as a 'screen' though it could
 * span multiple monitors).
 */
struct drm_connector {
        struct drm_device *dev;
        struct device *kdev;
        struct device_attribute *attr;
        struct list_head head;

        struct drm_mode_object base;

        char *name;

        /**
         * @mutex: Lock for general connector state, but currently only protects
         * @registered. Most of the connector state is still protected by
         * &drm_mode_config.mutex.
         */
        struct mutex mutex;

        /**
         * @index: Compacted connector index, which matches the position inside
         * the mode_config.list for drivers not supporting hot-add/removing. Can
         * be used as an array index. It is invariant over the lifetime of the
         * connector.
         */
        unsigned index;

        int connector_type;
        int connector_type_id;
        bool interlace_allowed;
        bool doublescan_allowed;
        bool stereo_allowed;
        /**
         * @registered: Is this connector exposed (registered) with userspace?
         * Protected by @mutex.
         */
        bool registered;

        /**
         * @modes:
         * Modes available on this connector (from fill_modes() + user).
         * Protected by &drm_mode_config.mutex.
         */
        struct list_head modes;

        /**
         * @status:
         * One of the drm_connector_status enums (connected, not, or unknown).
         * Protected by &drm_mode_config.mutex.
         */
        enum drm_connector_status status;

        /**
         * @probed_modes:
         * These are modes added by probing with DDC or the BIOS, before
         * filtering is applied. Used by the probe helpers. Protected by
         * &drm_mode_config.mutex.
         */
        struct list_head probed_modes;

        /**
         * @display_info: Display information is filled from EDID information
         * when a display is detected. For non hot-pluggable displays such as
         * flat panels in embedded systems, the driver should initialize the
         * &drm_display_info.width_mm and &drm_display_info.height_mm fields
         * with the physical size of the display.
         *
         * Protected by &drm_mode_config.mutex.
         */
        struct drm_display_info display_info;
        const struct drm_connector_funcs *funcs;

        struct drm_property_blob *edid_blob_ptr;
        struct drm_object_properties properties;

        /**
         * @path_blob_ptr:
         *
         * DRM blob property data for the DP MST path property.
         */
        struct drm_property_blob *path_blob_ptr;

        /**
         * @tile_blob_ptr:
         *
         * DRM blob property data for the tile property (used mostly by DP MST).
         * This is meant for screens which are driven through separate display
         * pipelines represented by &drm_crtc, which might not be running with
         * genlocked clocks. For tiled panels which are genlocked, like
         * dual-link LVDS or dual-link DSI, the driver should try to not expose
         * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
         */
        struct drm_property_blob *tile_blob_ptr;

/* should we poll this connector for connects and disconnects */
/* hot plug detectable */
#define DRM_CONNECTOR_POLL_HPD (1 << 0)
/* poll for connections */
#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
/* can cleanly poll for disconnections without flickering the screen */
/* DACs should rarely do this without a lot of testing */
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)

        /**
         * @polled:
         *
         * Connector polling mode, a combination of
         *
         * DRM_CONNECTOR_POLL_HPD
         *     The connector generates hotplug events and doesn't need to be
         *     periodically polled. The CONNECT and DISCONNECT flags must not
         *     be set together with the HPD flag.
         *
         * DRM_CONNECTOR_POLL_CONNECT
         *     Periodically poll the connector for connection.
         *
         * DRM_CONNECTOR_POLL_DISCONNECT
         *     Periodically poll the connector for disconnection.
         *
         * Set to 0 for connectors that don't support connection status
         * discovery.
         */
        uint8_t polled;

        /* requested DPMS state */
        int dpms;

        const struct drm_connector_helper_funcs *helper_private;

        /* forced on connector */
        struct drm_cmdline_mode cmdline_mode;
        enum drm_connector_force force;
        bool override_edid;

#define DRM_CONNECTOR_MAX_ENCODER 3
        uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
        struct drm_encoder *encoder; /* currently active encoder */

#define MAX_ELD_BYTES   128
        /* EDID bits */
        uint8_t eld[MAX_ELD_BYTES];
        bool latency_present[2];
        int video_latency[2];   /* [0]: progressive, [1]: interlaced */
        int audio_latency[2];
        int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
        unsigned bad_edid_counter;

        /* Flag for raw EDID header corruption - used in Displayport
         * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
         */
        bool edid_corrupt;

        struct dentry *debugfs_entry;

        struct drm_connector_state *state;

        /* DisplayID bits */
        bool has_tile;
        struct drm_tile_group *tile_group;
        bool tile_is_single_monitor;

        uint8_t num_h_tile, num_v_tile;
        uint8_t tile_h_loc, tile_v_loc;
        uint16_t tile_h_size, tile_v_size;
};

#define obj_to_connector(x) container_of(x, struct drm_connector, base)

int drm_connector_init(struct drm_device *dev,
                       struct drm_connector *connector,
                       const struct drm_connector_funcs *funcs,
                       int connector_type);
int drm_connector_register(struct drm_connector *connector);
void drm_connector_unregister(struct drm_connector *connector);
int drm_mode_connector_attach_encoder(struct drm_connector *connector,
                                      struct drm_encoder *encoder);

void drm_connector_cleanup(struct drm_connector *connector);
static inline unsigned drm_connector_index(struct drm_connector *connector)
{
        return connector->index;
}

/**
 * drm_connector_lookup - lookup connector object
 * @dev: DRM device
 * @id: connector object id
 *
 * This function looks up the connector object specified by id
 * add takes a reference to it.
 */
static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
                uint32_t id)
{
        struct drm_mode_object *mo;
        mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
        return mo ? obj_to_connector(mo) : NULL;
}

/**
 * drm_connector_reference - incr the connector refcnt
 * @connector: connector
 *
 * This function increments the connector's refcount.
 */
static inline void drm_connector_reference(struct drm_connector *connector)
{
        drm_mode_object_reference(&connector->base);
}

/**
 * drm_connector_unreference - unref a connector
 * @connector: connector to unref
 *
 * This function decrements the connector's refcount and frees it if it drops to zero.
 */
static inline void drm_connector_unreference(struct drm_connector *connector)
{
        drm_mode_object_unreference(&connector->base);
}

const char *drm_get_connector_status_name(enum drm_connector_status status);
const char *drm_get_subpixel_order_name(enum subpixel_order order);
const char *drm_get_dpms_name(int val);
const char *drm_get_dvi_i_subconnector_name(int val);
const char *drm_get_dvi_i_select_name(int val);
const char *drm_get_tv_subconnector_name(int val);
const char *drm_get_tv_select_name(int val);

int drm_mode_create_dvi_i_properties(struct drm_device *dev);
int drm_mode_create_tv_properties(struct drm_device *dev,
                                  unsigned int num_modes,
                                  const char * const modes[]);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
int drm_mode_create_suggested_offset_properties(struct drm_device *dev);

int drm_mode_connector_set_path_property(struct drm_connector *connector,
                                         const char *path);
int drm_mode_connector_set_tile_property(struct drm_connector *connector);
int drm_mode_connector_update_edid_property(struct drm_connector *connector,
                                            const struct edid *edid);

/**
 * struct drm_tile_group - Tile group metadata
 * @refcount: reference count
 * @dev: DRM device
 * @id: tile group id exposed to userspace
 * @group_data: Sink-private data identifying this group
 *
 * @group_data corresponds to displayid vend/prod/serial for external screens
 * with an EDID.
 */
struct drm_tile_group {
        struct kref refcount;
        struct drm_device *dev;
        int id;
        u8 group_data[8];
};

struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
                                                  char topology[8]);
struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
                                               char topology[8]);
void drm_mode_put_tile_group(struct drm_device *dev,
                             struct drm_tile_group *tg);

/**
 * drm_for_each_connector - iterate over all connectors
 * @connector: the loop cursor
 * @dev: the DRM device
 *
 * Iterate over all connectors of @dev.
 *
 * WARNING:
 *
 * This iterator is not safe against hotadd/removal of connectors and is
 * deprecated. Use drm_for_each_connector_iter() instead.
 */
#define drm_for_each_connector(connector, dev) \
        list_for_each_entry(connector, &(dev)->mode_config.connector_list, head)

/**
 * struct drm_connector_list_iter - connector_list iterator
 *
 * This iterator tracks state needed to be able to walk the connector_list
 * within struct drm_mode_config. Only use together with
 * drm_connector_list_iter_get(), drm_connector_list_iter_put() and
 * drm_connector_list_iter_next() respectively the convenience macro
 * drm_for_each_connector_iter().
 */
struct drm_connector_list_iter {
/* private: */
        struct drm_device *dev;
        struct drm_connector *conn;
};

void drm_connector_list_iter_get(struct drm_device *dev,
                                 struct drm_connector_list_iter *iter);
struct drm_connector *
drm_connector_list_iter_next(struct drm_connector_list_iter *iter);
void drm_connector_list_iter_put(struct drm_connector_list_iter *iter);

/**
 * drm_for_each_connector_iter - connector_list iterator macro
 * @connector: &struct drm_connector pointer used as cursor
 * @iter: &struct drm_connector_list_iter
 *
 * Note that @connector is only valid within the list body, if you want to use
 * @connector after calling drm_connector_list_iter_put() then you need to grab
 * your own reference first using drm_connector_reference().
 */
#define drm_for_each_connector_iter(connector, iter) \
        while ((connector = drm_connector_list_iter_next(iter)))

#endif