2 * Ftrace header. For implementation details beyond the random comments
3 * scattered below, see: Documentation/trace/ftrace-design.txt
6 #ifndef _LINUX_FTRACE_H
7 #define _LINUX_FTRACE_H
9 #include <linux/trace_clock.h>
10 #include <linux/kallsyms.h>
11 #include <linux/linkage.h>
12 #include <linux/bitops.h>
13 #include <linux/ptrace.h>
14 #include <linux/ktime.h>
15 #include <linux/sched.h>
16 #include <linux/types.h>
17 #include <linux/init.h>
20 #include <asm/ftrace.h>
23 * If the arch supports passing the variable contents of
24 * function_trace_op as the third parameter back from the
25 * mcount call, then the arch should define this as 1.
27 #ifndef ARCH_SUPPORTS_FTRACE_OPS
28 #define ARCH_SUPPORTS_FTRACE_OPS 0
32 * If the arch's mcount caller does not support all of ftrace's
33 * features, then it must call an indirect function that
34 * does. Or at least does enough to prevent any unwelcomed side effects.
36 #if !ARCH_SUPPORTS_FTRACE_OPS
37 # define FTRACE_FORCE_LIST_FUNC 1
39 # define FTRACE_FORCE_LIST_FUNC 0
42 /* Main tracing buffer and events set up */
44 void trace_init(void);
46 static inline void trace_init(void) { }
52 #ifdef CONFIG_FUNCTION_TRACER
54 extern int ftrace_enabled;
56 ftrace_enable_sysctl(struct ctl_table *table, int write,
57 void __user *buffer, size_t *lenp,
62 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
63 struct ftrace_ops *op, struct pt_regs *regs);
65 ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);
68 * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
69 * set in the flags member.
70 * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
71 * IPMODIFY are a kind of attribute flags which can be set only before
72 * registering the ftrace_ops, and can not be modified while registered.
73 * Changing those attribute flags after regsitering ftrace_ops will
74 * cause unexpected results.
76 * ENABLED - set/unset when ftrace_ops is registered/unregistered
77 * DYNAMIC - set when ftrace_ops is registered to denote dynamically
78 * allocated ftrace_ops which need special care
79 * PER_CPU - set manualy by ftrace_ops user to denote the ftrace_ops
80 * could be controlled by following calls:
81 * ftrace_function_local_enable
82 * ftrace_function_local_disable
83 * SAVE_REGS - The ftrace_ops wants regs saved at each function called
84 * and passed to the callback. If this flag is set, but the
85 * architecture does not support passing regs
86 * (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
87 * ftrace_ops will fail to register, unless the next flag
89 * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
90 * handler can handle an arch that does not save regs
91 * (the handler tests if regs == NULL), then it can set
92 * this flag instead. It will not fail registering the ftrace_ops
93 * but, the regs field will be NULL if the arch does not support
94 * passing regs to the handler.
95 * Note, if this flag is set, the SAVE_REGS flag will automatically
96 * get set upon registering the ftrace_ops, if the arch supports it.
97 * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
98 * that the call back has its own recursion protection. If it does
99 * not set this, then the ftrace infrastructure will add recursion
100 * protection for the caller.
101 * STUB - The ftrace_ops is just a place holder.
102 * INITIALIZED - The ftrace_ops has already been initialized (first use time
103 * register_ftrace_function() is called, it will initialized the ops)
104 * DELETED - The ops are being deleted, do not let them be registered again.
105 * ADDING - The ops is in the process of being added.
106 * REMOVING - The ops is in the process of being removed.
107 * MODIFYING - The ops is in the process of changing its filter functions.
108 * ALLOC_TRAMP - A dynamic trampoline was allocated by the core code.
109 * The arch specific code sets this flag when it allocated a
110 * trampoline. This lets the arch know that it can update the
111 * trampoline in case the callback function changes.
112 * The ftrace_ops trampoline can be set by the ftrace users, and
113 * in such cases the arch must not modify it. Only the arch ftrace
114 * core code should set this flag.
115 * IPMODIFY - The ops can modify the IP register. This can only be set with
116 * SAVE_REGS. If another ops with this flag set is already registered
117 * for any of the functions that this ops will be registered for, then
118 * this ops will fail to register or set_filter_ip.
119 * PID - Is affected by set_ftrace_pid (allows filtering on those pids)
122 FTRACE_OPS_FL_ENABLED = 1 << 0,
123 FTRACE_OPS_FL_DYNAMIC = 1 << 1,
124 FTRACE_OPS_FL_PER_CPU = 1 << 2,
125 FTRACE_OPS_FL_SAVE_REGS = 1 << 3,
126 FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 4,
127 FTRACE_OPS_FL_RECURSION_SAFE = 1 << 5,
128 FTRACE_OPS_FL_STUB = 1 << 6,
129 FTRACE_OPS_FL_INITIALIZED = 1 << 7,
130 FTRACE_OPS_FL_DELETED = 1 << 8,
131 FTRACE_OPS_FL_ADDING = 1 << 9,
132 FTRACE_OPS_FL_REMOVING = 1 << 10,
133 FTRACE_OPS_FL_MODIFYING = 1 << 11,
134 FTRACE_OPS_FL_ALLOC_TRAMP = 1 << 12,
135 FTRACE_OPS_FL_IPMODIFY = 1 << 13,
136 FTRACE_OPS_FL_PID = 1 << 14,
137 FTRACE_OPS_FL_RCU = 1 << 15,
140 #ifdef CONFIG_DYNAMIC_FTRACE
141 /* The hash used to know what functions callbacks trace */
142 struct ftrace_ops_hash {
143 struct ftrace_hash *notrace_hash;
144 struct ftrace_hash *filter_hash;
145 struct mutex regex_lock;
150 * Note, ftrace_ops can be referenced outside of RCU protection, unless
151 * the RCU flag is set. If ftrace_ops is allocated and not part of kernel
152 * core data, the unregistering of it will perform a scheduling on all CPUs
153 * to make sure that there are no more users. Depending on the load of the
154 * system that may take a bit of time.
156 * Any private data added must also take care not to be freed and if private
157 * data is added to a ftrace_ops that is in core code, the user of the
158 * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
162 struct ftrace_ops *next;
165 ftrace_func_t saved_func;
166 int __percpu *disabled;
167 #ifdef CONFIG_DYNAMIC_FTRACE
168 struct ftrace_ops_hash local_hash;
169 struct ftrace_ops_hash *func_hash;
170 struct ftrace_ops_hash old_hash;
171 unsigned long trampoline;
172 unsigned long trampoline_size;
177 * Type of the current tracing.
179 enum ftrace_tracing_type_t {
180 FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
181 FTRACE_TYPE_RETURN, /* Hook the return of the function */
184 /* Current tracing type, default is FTRACE_TYPE_ENTER */
185 extern enum ftrace_tracing_type_t ftrace_tracing_type;
188 * The ftrace_ops must be a static and should also
189 * be read_mostly. These functions do modify read_mostly variables
190 * so use them sparely. Never free an ftrace_op or modify the
191 * next pointer after it has been registered. Even after unregistering
192 * it, the next pointer may still be used internally.
194 int register_ftrace_function(struct ftrace_ops *ops);
195 int unregister_ftrace_function(struct ftrace_ops *ops);
196 void clear_ftrace_function(void);
199 * ftrace_function_local_enable - enable ftrace_ops on current cpu
201 * This function enables tracing on current cpu by decreasing
202 * the per cpu control variable.
203 * It must be called with preemption disabled and only on ftrace_ops
204 * registered with FTRACE_OPS_FL_PER_CPU. If called without preemption
205 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
207 static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
209 if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_PER_CPU)))
212 (*this_cpu_ptr(ops->disabled))--;
216 * ftrace_function_local_disable - disable ftrace_ops on current cpu
218 * This function disables tracing on current cpu by increasing
219 * the per cpu control variable.
220 * It must be called with preemption disabled and only on ftrace_ops
221 * registered with FTRACE_OPS_FL_PER_CPU. If called without preemption
222 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
224 static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
226 if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_PER_CPU)))
229 (*this_cpu_ptr(ops->disabled))++;
233 * ftrace_function_local_disabled - returns ftrace_ops disabled value
236 * This function returns value of ftrace_ops::disabled on current cpu.
237 * It must be called with preemption disabled and only on ftrace_ops
238 * registered with FTRACE_OPS_FL_PER_CPU. If called without preemption
239 * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
241 static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
243 WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_PER_CPU));
244 return *this_cpu_ptr(ops->disabled);
247 extern void ftrace_stub(unsigned long a0, unsigned long a1,
248 struct ftrace_ops *op, struct pt_regs *regs);
250 #else /* !CONFIG_FUNCTION_TRACER */
252 * (un)register_ftrace_function must be a macro since the ops parameter
253 * must not be evaluated.
255 #define register_ftrace_function(ops) ({ 0; })
256 #define unregister_ftrace_function(ops) ({ 0; })
257 static inline int ftrace_nr_registered_ops(void)
261 static inline void clear_ftrace_function(void) { }
262 static inline void ftrace_kill(void) { }
263 #endif /* CONFIG_FUNCTION_TRACER */
265 #ifdef CONFIG_STACK_TRACER
267 #define STACK_TRACE_ENTRIES 500
271 extern unsigned stack_trace_index[];
272 extern struct stack_trace stack_trace_max;
273 extern unsigned long stack_trace_max_size;
274 extern arch_spinlock_t stack_trace_max_lock;
276 extern int stack_tracer_enabled;
277 void stack_trace_print(void);
279 stack_trace_sysctl(struct ctl_table *table, int write,
280 void __user *buffer, size_t *lenp,
284 struct ftrace_func_command {
285 struct list_head list;
287 int (*func)(struct ftrace_hash *hash,
288 char *func, char *cmd,
289 char *params, int enable);
292 #ifdef CONFIG_DYNAMIC_FTRACE
294 int ftrace_arch_code_modify_prepare(void);
295 int ftrace_arch_code_modify_post_process(void);
299 enum ftrace_bug_type {
306 extern enum ftrace_bug_type ftrace_bug_type;
309 * Archs can set this to point to a variable that holds the value that was
310 * expected at the call site before calling ftrace_bug().
312 extern const void *ftrace_expected;
314 void ftrace_bug(int err, struct dyn_ftrace *rec);
318 struct ftrace_probe_ops {
319 void (*func)(unsigned long ip,
320 unsigned long parent_ip,
322 int (*init)(struct ftrace_probe_ops *ops,
323 unsigned long ip, void **data);
324 void (*free)(struct ftrace_probe_ops *ops,
325 unsigned long ip, void **data);
326 int (*print)(struct seq_file *m,
328 struct ftrace_probe_ops *ops,
333 register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
336 unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
339 unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
340 extern void unregister_ftrace_function_probe_all(char *glob);
342 extern int ftrace_text_reserved(const void *start, const void *end);
344 extern int ftrace_nr_registered_ops(void);
346 bool is_ftrace_trampoline(unsigned long addr);
349 * The dyn_ftrace record's flags field is split into two parts.
350 * the first part which is '0-FTRACE_REF_MAX' is a counter of
351 * the number of callbacks that have registered the function that
352 * the dyn_ftrace descriptor represents.
354 * The second part is a mask:
355 * ENABLED - the function is being traced
356 * REGS - the record wants the function to save regs
357 * REGS_EN - the function is set up to save regs.
358 * IPMODIFY - the record allows for the IP address to be changed.
359 * DISABLED - the record is not ready to be touched yet
361 * When a new ftrace_ops is registered and wants a function to save
362 * pt_regs, the rec->flag REGS is set. When the function has been
363 * set up to save regs, the REG_EN flag is set. Once a function
364 * starts saving regs it will do so until all ftrace_ops are removed
365 * from tracing that function.
368 FTRACE_FL_ENABLED = (1UL << 31),
369 FTRACE_FL_REGS = (1UL << 30),
370 FTRACE_FL_REGS_EN = (1UL << 29),
371 FTRACE_FL_TRAMP = (1UL << 28),
372 FTRACE_FL_TRAMP_EN = (1UL << 27),
373 FTRACE_FL_IPMODIFY = (1UL << 26),
374 FTRACE_FL_DISABLED = (1UL << 25),
377 #define FTRACE_REF_MAX_SHIFT 25
378 #define FTRACE_FL_BITS 7
379 #define FTRACE_FL_MASKED_BITS ((1UL << FTRACE_FL_BITS) - 1)
380 #define FTRACE_FL_MASK (FTRACE_FL_MASKED_BITS << FTRACE_REF_MAX_SHIFT)
381 #define FTRACE_REF_MAX ((1UL << FTRACE_REF_MAX_SHIFT) - 1)
383 #define ftrace_rec_count(rec) ((rec)->flags & ~FTRACE_FL_MASK)
386 unsigned long ip; /* address of mcount call-site */
388 struct dyn_arch_ftrace arch;
391 int ftrace_force_update(void);
392 int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
393 int remove, int reset);
394 int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
396 int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
398 void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
399 void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
400 void ftrace_free_filter(struct ftrace_ops *ops);
401 void ftrace_ops_set_global_filter(struct ftrace_ops *ops);
403 int register_ftrace_command(struct ftrace_func_command *cmd);
404 int unregister_ftrace_command(struct ftrace_func_command *cmd);
407 FTRACE_UPDATE_CALLS = (1 << 0),
408 FTRACE_DISABLE_CALLS = (1 << 1),
409 FTRACE_UPDATE_TRACE_FUNC = (1 << 2),
410 FTRACE_START_FUNC_RET = (1 << 3),
411 FTRACE_STOP_FUNC_RET = (1 << 4),
415 * The FTRACE_UPDATE_* enum is used to pass information back
416 * from the ftrace_update_record() and ftrace_test_record()
417 * functions. These are called by the code update routines
418 * to find out what is to be done for a given function.
420 * IGNORE - The function is already what we want it to be
421 * MAKE_CALL - Start tracing the function
422 * MODIFY_CALL - Stop saving regs for the function
423 * MAKE_NOP - Stop tracing the function
426 FTRACE_UPDATE_IGNORE,
427 FTRACE_UPDATE_MAKE_CALL,
428 FTRACE_UPDATE_MODIFY_CALL,
429 FTRACE_UPDATE_MAKE_NOP,
433 FTRACE_ITER_FILTER = (1 << 0),
434 FTRACE_ITER_NOTRACE = (1 << 1),
435 FTRACE_ITER_PRINTALL = (1 << 2),
436 FTRACE_ITER_DO_HASH = (1 << 3),
437 FTRACE_ITER_HASH = (1 << 4),
438 FTRACE_ITER_ENABLED = (1 << 5),
441 void arch_ftrace_update_code(int command);
443 struct ftrace_rec_iter;
445 struct ftrace_rec_iter *ftrace_rec_iter_start(void);
446 struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
447 struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
449 #define for_ftrace_rec_iter(iter) \
450 for (iter = ftrace_rec_iter_start(); \
452 iter = ftrace_rec_iter_next(iter))
455 int ftrace_update_record(struct dyn_ftrace *rec, int enable);
456 int ftrace_test_record(struct dyn_ftrace *rec, int enable);
457 void ftrace_run_stop_machine(int command);
458 unsigned long ftrace_location(unsigned long ip);
459 unsigned long ftrace_location_range(unsigned long start, unsigned long end);
460 unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
461 unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);
463 extern ftrace_func_t ftrace_trace_function;
465 int ftrace_regex_open(struct ftrace_ops *ops, int flag,
466 struct inode *inode, struct file *file);
467 ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
468 size_t cnt, loff_t *ppos);
469 ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
470 size_t cnt, loff_t *ppos);
471 int ftrace_regex_release(struct inode *inode, struct file *file);
474 ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
476 /* defined in arch */
477 extern int ftrace_ip_converted(unsigned long ip);
478 extern int ftrace_dyn_arch_init(void);
479 extern void ftrace_replace_code(int enable);
480 extern int ftrace_update_ftrace_func(ftrace_func_t func);
481 extern void ftrace_caller(void);
482 extern void ftrace_regs_caller(void);
483 extern void ftrace_call(void);
484 extern void ftrace_regs_call(void);
485 extern void mcount_call(void);
487 void ftrace_modify_all_code(int command);
490 #define FTRACE_ADDR ((unsigned long)ftrace_caller)
493 #ifndef FTRACE_GRAPH_ADDR
494 #define FTRACE_GRAPH_ADDR ((unsigned long)ftrace_graph_caller)
497 #ifndef FTRACE_REGS_ADDR
498 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
499 # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
501 # define FTRACE_REGS_ADDR FTRACE_ADDR
506 * If an arch would like functions that are only traced
507 * by the function graph tracer to jump directly to its own
508 * trampoline, then they can define FTRACE_GRAPH_TRAMP_ADDR
509 * to be that address to jump to.
511 #ifndef FTRACE_GRAPH_TRAMP_ADDR
512 #define FTRACE_GRAPH_TRAMP_ADDR ((unsigned long) 0)
515 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
516 extern void ftrace_graph_caller(void);
517 extern int ftrace_enable_ftrace_graph_caller(void);
518 extern int ftrace_disable_ftrace_graph_caller(void);
520 static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
521 static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
525 * ftrace_make_nop - convert code into nop
526 * @mod: module structure if called by module load initialization
527 * @rec: the mcount call site record
528 * @addr: the address that the call site should be calling
530 * This is a very sensitive operation and great care needs
531 * to be taken by the arch. The operation should carefully
532 * read the location, check to see if what is read is indeed
533 * what we expect it to be, and then on success of the compare,
534 * it should write to the location.
536 * The code segment at @rec->ip should be a caller to @addr
540 * -EFAULT on error reading the location
541 * -EINVAL on a failed compare of the contents
542 * -EPERM on error writing to the location
543 * Any other value will be considered a failure.
545 extern int ftrace_make_nop(struct module *mod,
546 struct dyn_ftrace *rec, unsigned long addr);
549 * ftrace_make_call - convert a nop call site into a call to addr
550 * @rec: the mcount call site record
551 * @addr: the address that the call site should call
553 * This is a very sensitive operation and great care needs
554 * to be taken by the arch. The operation should carefully
555 * read the location, check to see if what is read is indeed
556 * what we expect it to be, and then on success of the compare,
557 * it should write to the location.
559 * The code segment at @rec->ip should be a nop
563 * -EFAULT on error reading the location
564 * -EINVAL on a failed compare of the contents
565 * -EPERM on error writing to the location
566 * Any other value will be considered a failure.
568 extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
570 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
572 * ftrace_modify_call - convert from one addr to another (no nop)
573 * @rec: the mcount call site record
574 * @old_addr: the address expected to be currently called to
575 * @addr: the address to change to
577 * This is a very sensitive operation and great care needs
578 * to be taken by the arch. The operation should carefully
579 * read the location, check to see if what is read is indeed
580 * what we expect it to be, and then on success of the compare,
581 * it should write to the location.
583 * The code segment at @rec->ip should be a caller to @old_addr
587 * -EFAULT on error reading the location
588 * -EINVAL on a failed compare of the contents
589 * -EPERM on error writing to the location
590 * Any other value will be considered a failure.
592 extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
595 /* Should never be called */
596 static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
603 /* May be defined in arch */
604 extern int ftrace_arch_read_dyn_info(char *buf, int size);
606 extern int skip_trace(unsigned long ip);
607 extern void ftrace_module_init(struct module *mod);
608 extern void ftrace_module_enable(struct module *mod);
609 extern void ftrace_release_mod(struct module *mod);
611 extern void ftrace_disable_daemon(void);
612 extern void ftrace_enable_daemon(void);
613 #else /* CONFIG_DYNAMIC_FTRACE */
614 static inline int skip_trace(unsigned long ip) { return 0; }
615 static inline int ftrace_force_update(void) { return 0; }
616 static inline void ftrace_disable_daemon(void) { }
617 static inline void ftrace_enable_daemon(void) { }
618 static inline void ftrace_module_init(struct module *mod) { }
619 static inline void ftrace_module_enable(struct module *mod) { }
620 static inline void ftrace_release_mod(struct module *mod) { }
621 static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
625 static inline __init int unregister_ftrace_command(char *cmd_name)
629 static inline int ftrace_text_reserved(const void *start, const void *end)
633 static inline unsigned long ftrace_location(unsigned long ip)
639 * Again users of functions that have ftrace_ops may not
640 * have them defined when ftrace is not enabled, but these
641 * functions may still be called. Use a macro instead of inline.
643 #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
644 #define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
645 #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
646 #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
647 #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
648 #define ftrace_free_filter(ops) do { } while (0)
649 #define ftrace_ops_set_global_filter(ops) do { } while (0)
651 static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
652 size_t cnt, loff_t *ppos) { return -ENODEV; }
653 static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
654 size_t cnt, loff_t *ppos) { return -ENODEV; }
656 ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
658 static inline bool is_ftrace_trampoline(unsigned long addr)
662 #endif /* CONFIG_DYNAMIC_FTRACE */
664 /* totally disable ftrace - can not re-enable after this */
665 void ftrace_kill(void);
667 static inline void tracer_disable(void)
669 #ifdef CONFIG_FUNCTION_TRACER
675 * Ftrace disable/restore without lock. Some synchronization mechanism
676 * must be used to prevent ftrace_enabled to be changed between
679 static inline int __ftrace_enabled_save(void)
681 #ifdef CONFIG_FUNCTION_TRACER
682 int saved_ftrace_enabled = ftrace_enabled;
684 return saved_ftrace_enabled;
690 static inline void __ftrace_enabled_restore(int enabled)
692 #ifdef CONFIG_FUNCTION_TRACER
693 ftrace_enabled = enabled;
697 /* All archs should have this, but we define it for consistency */
698 #ifndef ftrace_return_address0
699 # define ftrace_return_address0 __builtin_return_address(0)
702 /* Archs may use other ways for ADDR1 and beyond */
703 #ifndef ftrace_return_address
704 # ifdef CONFIG_FRAME_POINTER
705 # define ftrace_return_address(n) __builtin_return_address(n)
707 # define ftrace_return_address(n) 0UL
711 #define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
712 #define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
713 #define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
714 #define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
715 #define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
716 #define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
717 #define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
719 static inline unsigned long get_lock_parent_ip(void)
721 unsigned long addr = CALLER_ADDR0;
723 if (!in_lock_functions(addr))
726 if (!in_lock_functions(addr))
731 #ifdef CONFIG_IRQSOFF_TRACER
732 extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
733 extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
735 static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
736 static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
739 #ifdef CONFIG_PREEMPT_TRACER
740 extern void trace_preempt_on(unsigned long a0, unsigned long a1);
741 extern void trace_preempt_off(unsigned long a0, unsigned long a1);
744 * Use defines instead of static inlines because some arches will make code out
745 * of the CALLER_ADDR, when we really want these to be a real nop.
747 # define trace_preempt_on(a0, a1) do { } while (0)
748 # define trace_preempt_off(a0, a1) do { } while (0)
751 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
752 extern void ftrace_init(void);
754 static inline void ftrace_init(void) { }
758 * Structure that defines an entry function trace.
759 * It's already packed but the attribute "packed" is needed
760 * to remove extra padding at the end.
762 struct ftrace_graph_ent {
763 unsigned long func; /* Current function */
768 * Structure that defines a return function trace.
769 * It's already packed but the attribute "packed" is needed
770 * to remove extra padding at the end.
772 struct ftrace_graph_ret {
773 unsigned long func; /* Current function */
774 /* Number of functions that overran the depth limit for current task */
775 unsigned long overrun;
776 unsigned long long calltime;
777 unsigned long long rettime;
781 /* Type of the callback handlers for tracing function graph*/
782 typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
783 typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
785 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
788 #define INIT_FTRACE_GRAPH .ret_stack = NULL,
791 * Stack of return addresses for functions
793 * Used in struct thread_info
795 struct ftrace_ret_stack {
798 unsigned long long calltime;
799 #ifdef CONFIG_FUNCTION_PROFILER
800 unsigned long long subtime;
802 #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
805 #ifdef HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
811 * Primary handler of a function return.
812 * It relays on ftrace_return_to_handler.
813 * Defined in entry_32/64.S
815 extern void return_to_handler(void);
818 ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
819 unsigned long frame_pointer, unsigned long *retp);
821 unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
822 unsigned long ret, unsigned long *retp);
825 * Sometimes we don't want to trace a function with the function
826 * graph tracer but we want them to keep traced by the usual function
827 * tracer if the function graph tracer is not configured.
829 #define __notrace_funcgraph notrace
831 #define FTRACE_NOTRACE_DEPTH 65536
832 #define FTRACE_RETFUNC_DEPTH 50
833 #define FTRACE_RETSTACK_ALLOC_SIZE 32
834 extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
835 trace_func_graph_ent_t entryfunc);
837 extern bool ftrace_graph_is_dead(void);
838 extern void ftrace_graph_stop(void);
840 /* The current handlers in use */
841 extern trace_func_graph_ret_t ftrace_graph_return;
842 extern trace_func_graph_ent_t ftrace_graph_entry;
844 extern void unregister_ftrace_graph(void);
846 extern void ftrace_graph_init_task(struct task_struct *t);
847 extern void ftrace_graph_exit_task(struct task_struct *t);
848 extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
850 static inline int task_curr_ret_stack(struct task_struct *t)
852 return t->curr_ret_stack;
855 static inline void pause_graph_tracing(void)
857 atomic_inc(¤t->tracing_graph_pause);
860 static inline void unpause_graph_tracing(void)
862 atomic_dec(¤t->tracing_graph_pause);
864 #else /* !CONFIG_FUNCTION_GRAPH_TRACER */
866 #define __notrace_funcgraph
867 #define INIT_FTRACE_GRAPH
869 static inline void ftrace_graph_init_task(struct task_struct *t) { }
870 static inline void ftrace_graph_exit_task(struct task_struct *t) { }
871 static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
873 static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
874 trace_func_graph_ent_t entryfunc)
878 static inline void unregister_ftrace_graph(void) { }
880 static inline int task_curr_ret_stack(struct task_struct *tsk)
885 static inline unsigned long
886 ftrace_graph_ret_addr(struct task_struct *task, int *idx, unsigned long ret,
892 static inline void pause_graph_tracing(void) { }
893 static inline void unpause_graph_tracing(void) { }
894 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
896 #ifdef CONFIG_TRACING
898 /* flags for current->trace */
900 TSK_TRACE_FL_TRACE_BIT = 0,
901 TSK_TRACE_FL_GRAPH_BIT = 1,
904 TSK_TRACE_FL_TRACE = 1 << TSK_TRACE_FL_TRACE_BIT,
905 TSK_TRACE_FL_GRAPH = 1 << TSK_TRACE_FL_GRAPH_BIT,
908 static inline void set_tsk_trace_trace(struct task_struct *tsk)
910 set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
913 static inline void clear_tsk_trace_trace(struct task_struct *tsk)
915 clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
918 static inline int test_tsk_trace_trace(struct task_struct *tsk)
920 return tsk->trace & TSK_TRACE_FL_TRACE;
923 static inline void set_tsk_trace_graph(struct task_struct *tsk)
925 set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
928 static inline void clear_tsk_trace_graph(struct task_struct *tsk)
930 clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
933 static inline int test_tsk_trace_graph(struct task_struct *tsk)
935 return tsk->trace & TSK_TRACE_FL_GRAPH;
938 enum ftrace_dump_mode;
940 extern enum ftrace_dump_mode ftrace_dump_on_oops;
941 extern int tracepoint_printk;
943 extern void disable_trace_on_warning(void);
944 extern int __disable_trace_on_warning;
946 #ifdef CONFIG_PREEMPT
947 #define INIT_TRACE_RECURSION .trace_recursion = 0,
950 int tracepoint_printk_sysctl(struct ctl_table *table, int write,
951 void __user *buffer, size_t *lenp,
954 #else /* CONFIG_TRACING */
955 static inline void disable_trace_on_warning(void) { }
956 #endif /* CONFIG_TRACING */
958 #ifndef INIT_TRACE_RECURSION
959 #define INIT_TRACE_RECURSION
962 #ifdef CONFIG_FTRACE_SYSCALLS
964 unsigned long arch_syscall_addr(int nr);
966 #endif /* CONFIG_FTRACE_SYSCALLS */
968 #endif /* _LINUX_FTRACE_H */