]> git.karo-electronics.de Git - mv-sheeva.git/blob - include/linux/interrupt.h
Merge branch 'linus' into irq/threaded
[mv-sheeva.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/irqnr.h>
12 #include <linux/hardirq.h>
13 #include <linux/sched.h>
14 #include <linux/irqflags.h>
15 #include <linux/smp.h>
16 #include <linux/percpu.h>
17
18 #include <asm/atomic.h>
19 #include <asm/ptrace.h>
20 #include <asm/system.h>
21
22 /*
23  * These correspond to the IORESOURCE_IRQ_* defines in
24  * linux/ioport.h to select the interrupt line behaviour.  When
25  * requesting an interrupt without specifying a IRQF_TRIGGER, the
26  * setting should be assumed to be "as already configured", which
27  * may be as per machine or firmware initialisation.
28  */
29 #define IRQF_TRIGGER_NONE       0x00000000
30 #define IRQF_TRIGGER_RISING     0x00000001
31 #define IRQF_TRIGGER_FALLING    0x00000002
32 #define IRQF_TRIGGER_HIGH       0x00000004
33 #define IRQF_TRIGGER_LOW        0x00000008
34 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
35                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
36 #define IRQF_TRIGGER_PROBE      0x00000010
37
38 /*
39  * These flags used only by the kernel as part of the
40  * irq handling routines.
41  *
42  * IRQF_DISABLED - keep irqs disabled when calling the action handler
43  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
44  * IRQF_SHARED - allow sharing the irq among several devices
45  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
46  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
47  * IRQF_PERCPU - Interrupt is per cpu
48  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
49  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
50  *                registered first in an shared interrupt is considered for
51  *                performance reasons)
52  */
53 #define IRQF_DISABLED           0x00000020
54 #define IRQF_SAMPLE_RANDOM      0x00000040
55 #define IRQF_SHARED             0x00000080
56 #define IRQF_PROBE_SHARED       0x00000100
57 #define IRQF_TIMER              0x00000200
58 #define IRQF_PERCPU             0x00000400
59 #define IRQF_NOBALANCING        0x00000800
60 #define IRQF_IRQPOLL            0x00001000
61
62 /*
63  * Bits used by threaded handlers:
64  * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
65  * IRQTF_DIED      - handler thread died
66  * IRQTF_WARNED    - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
67  */
68 enum {
69         IRQTF_RUNTHREAD,
70         IRQTF_DIED,
71         IRQTF_WARNED,
72 };
73
74 typedef irqreturn_t (*irq_handler_t)(int, void *);
75
76 /**
77  * struct irqaction - per interrupt action descriptor
78  * @handler:    interrupt handler function
79  * @flags:      flags (see IRQF_* above)
80  * @mask:       no comment as it is useless and about to be removed
81  * @name:       name of the device
82  * @dev_id:     cookie to identify the device
83  * @next:       pointer to the next irqaction for shared interrupts
84  * @irq:        interrupt number
85  * @dir:        pointer to the proc/irq/NN/name entry
86  * @thread_fn:  interupt handler function for threaded interrupts
87  * @thread:     thread pointer for threaded interrupts
88  * @thread_flags:       flags related to @thread
89  */
90 struct irqaction {
91         irq_handler_t handler;
92         unsigned long flags;
93         cpumask_t mask;
94         const char *name;
95         void *dev_id;
96         struct irqaction *next;
97         int irq;
98         struct proc_dir_entry *dir;
99         irq_handler_t thread_fn;
100         struct task_struct *thread;
101         unsigned long thread_flags;
102 };
103
104 extern irqreturn_t no_action(int cpl, void *dev_id);
105
106 #ifdef CONFIG_GENERIC_HARDIRQS
107 extern int __must_check
108 request_threaded_irq(unsigned int irq, irq_handler_t handler,
109                      irq_handler_t thread_fn,
110                      unsigned long flags, const char *name, void *dev);
111
112 static inline int __must_check
113 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
114             const char *name, void *dev)
115 {
116         return request_threaded_irq(irq, handler, NULL, flags, name, dev);
117 }
118
119 extern void exit_irq_thread(void);
120 #else
121
122 extern int __must_check
123 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
124             const char *name, void *dev);
125
126 /*
127  * Special function to avoid ifdeffery in kernel/irq/devres.c which
128  * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
129  * m68k). I really love these $@%#!* obvious Makefile references:
130  * ../../../kernel/irq/devres.o
131  */
132 static inline int __must_check
133 request_threaded_irq(unsigned int irq, irq_handler_t handler,
134                      irq_handler_t thread_fn,
135                      unsigned long flags, const char *name, void *dev)
136 {
137         return request_irq(irq, handler, flags, name, dev);
138 }
139
140 static inline void exit_irq_thread(void) { }
141 #endif
142
143 extern void free_irq(unsigned int, void *);
144
145 struct device;
146
147 extern int __must_check
148 devm_request_threaded_irq(struct device *dev, unsigned int irq,
149                           irq_handler_t handler, irq_handler_t thread_fn,
150                           unsigned long irqflags, const char *devname,
151                           void *dev_id);
152
153 static inline int __must_check
154 devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
155                  unsigned long irqflags, const char *devname, void *dev_id)
156 {
157         return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
158                                          devname, dev_id);
159 }
160
161 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
162
163 /*
164  * On lockdep we dont want to enable hardirqs in hardirq
165  * context. Use local_irq_enable_in_hardirq() to annotate
166  * kernel code that has to do this nevertheless (pretty much
167  * the only valid case is for old/broken hardware that is
168  * insanely slow).
169  *
170  * NOTE: in theory this might break fragile code that relies
171  * on hardirq delivery - in practice we dont seem to have such
172  * places left. So the only effect should be slightly increased
173  * irqs-off latencies.
174  */
175 #ifdef CONFIG_LOCKDEP
176 # define local_irq_enable_in_hardirq()  do { } while (0)
177 #else
178 # define local_irq_enable_in_hardirq()  local_irq_enable()
179 #endif
180
181 extern void disable_irq_nosync(unsigned int irq);
182 extern void disable_irq(unsigned int irq);
183 extern void enable_irq(unsigned int irq);
184
185 /* The following three functions are for the core kernel use only. */
186 extern void suspend_device_irqs(void);
187 extern void resume_device_irqs(void);
188 #ifdef CONFIG_PM_SLEEP
189 extern int check_wakeup_irqs(void);
190 #else
191 static inline int check_wakeup_irqs(void) { return 0; }
192 #endif
193
194 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
195
196 extern cpumask_var_t irq_default_affinity;
197
198 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
199 extern int irq_can_set_affinity(unsigned int irq);
200 extern int irq_select_affinity(unsigned int irq);
201
202 #else /* CONFIG_SMP */
203
204 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
205 {
206         return -EINVAL;
207 }
208
209 static inline int irq_can_set_affinity(unsigned int irq)
210 {
211         return 0;
212 }
213
214 static inline int irq_select_affinity(unsigned int irq)  { return 0; }
215
216 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
217
218 #ifdef CONFIG_GENERIC_HARDIRQS
219 /*
220  * Special lockdep variants of irq disabling/enabling.
221  * These should be used for locking constructs that
222  * know that a particular irq context which is disabled,
223  * and which is the only irq-context user of a lock,
224  * that it's safe to take the lock in the irq-disabled
225  * section without disabling hardirqs.
226  *
227  * On !CONFIG_LOCKDEP they are equivalent to the normal
228  * irq disable/enable methods.
229  */
230 static inline void disable_irq_nosync_lockdep(unsigned int irq)
231 {
232         disable_irq_nosync(irq);
233 #ifdef CONFIG_LOCKDEP
234         local_irq_disable();
235 #endif
236 }
237
238 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
239 {
240         disable_irq_nosync(irq);
241 #ifdef CONFIG_LOCKDEP
242         local_irq_save(*flags);
243 #endif
244 }
245
246 static inline void disable_irq_lockdep(unsigned int irq)
247 {
248         disable_irq(irq);
249 #ifdef CONFIG_LOCKDEP
250         local_irq_disable();
251 #endif
252 }
253
254 static inline void enable_irq_lockdep(unsigned int irq)
255 {
256 #ifdef CONFIG_LOCKDEP
257         local_irq_enable();
258 #endif
259         enable_irq(irq);
260 }
261
262 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
263 {
264 #ifdef CONFIG_LOCKDEP
265         local_irq_restore(*flags);
266 #endif
267         enable_irq(irq);
268 }
269
270 /* IRQ wakeup (PM) control: */
271 extern int set_irq_wake(unsigned int irq, unsigned int on);
272
273 static inline int enable_irq_wake(unsigned int irq)
274 {
275         return set_irq_wake(irq, 1);
276 }
277
278 static inline int disable_irq_wake(unsigned int irq)
279 {
280         return set_irq_wake(irq, 0);
281 }
282
283 #else /* !CONFIG_GENERIC_HARDIRQS */
284 /*
285  * NOTE: non-genirq architectures, if they want to support the lock
286  * validator need to define the methods below in their asm/irq.h
287  * files, under an #ifdef CONFIG_LOCKDEP section.
288  */
289 #ifndef CONFIG_LOCKDEP
290 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
291 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
292                                                 disable_irq_nosync(irq)
293 #  define disable_irq_lockdep(irq)              disable_irq(irq)
294 #  define enable_irq_lockdep(irq)               enable_irq(irq)
295 #  define enable_irq_lockdep_irqrestore(irq, flags) \
296                                                 enable_irq(irq)
297 # endif
298
299 static inline int enable_irq_wake(unsigned int irq)
300 {
301         return 0;
302 }
303
304 static inline int disable_irq_wake(unsigned int irq)
305 {
306         return 0;
307 }
308 #endif /* CONFIG_GENERIC_HARDIRQS */
309
310 #ifndef __ARCH_SET_SOFTIRQ_PENDING
311 #define set_softirq_pending(x) (local_softirq_pending() = (x))
312 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
313 #endif
314
315 /* Some architectures might implement lazy enabling/disabling of
316  * interrupts. In some cases, such as stop_machine, we might want
317  * to ensure that after a local_irq_disable(), interrupts have
318  * really been disabled in hardware. Such architectures need to
319  * implement the following hook.
320  */
321 #ifndef hard_irq_disable
322 #define hard_irq_disable()      do { } while(0)
323 #endif
324
325 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
326    frequency threaded job scheduling. For almost all the purposes
327    tasklets are more than enough. F.e. all serial device BHs et
328    al. should be converted to tasklets, not to softirqs.
329  */
330
331 enum
332 {
333         HI_SOFTIRQ=0,
334         TIMER_SOFTIRQ,
335         NET_TX_SOFTIRQ,
336         NET_RX_SOFTIRQ,
337         BLOCK_SOFTIRQ,
338         TASKLET_SOFTIRQ,
339         SCHED_SOFTIRQ,
340         HRTIMER_SOFTIRQ,
341         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
342
343         NR_SOFTIRQS
344 };
345
346 /* map softirq index to softirq name. update 'softirq_to_name' in
347  * kernel/softirq.c when adding a new softirq.
348  */
349 extern char *softirq_to_name[NR_SOFTIRQS];
350
351 /* softirq mask and active fields moved to irq_cpustat_t in
352  * asm/hardirq.h to get better cache usage.  KAO
353  */
354
355 struct softirq_action
356 {
357         void    (*action)(struct softirq_action *);
358 };
359
360 asmlinkage void do_softirq(void);
361 asmlinkage void __do_softirq(void);
362 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
363 extern void softirq_init(void);
364 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
365 extern void raise_softirq_irqoff(unsigned int nr);
366 extern void raise_softirq(unsigned int nr);
367
368 /* This is the worklist that queues up per-cpu softirq work.
369  *
370  * send_remote_sendirq() adds work to these lists, and
371  * the softirq handler itself dequeues from them.  The queues
372  * are protected by disabling local cpu interrupts and they must
373  * only be accessed by the local cpu that they are for.
374  */
375 DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
376
377 /* Try to send a softirq to a remote cpu.  If this cannot be done, the
378  * work will be queued to the local cpu.
379  */
380 extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
381
382 /* Like send_remote_softirq(), but the caller must disable local cpu interrupts
383  * and compute the current cpu, passed in as 'this_cpu'.
384  */
385 extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
386                                   int this_cpu, int softirq);
387
388 /* Tasklets --- multithreaded analogue of BHs.
389
390    Main feature differing them of generic softirqs: tasklet
391    is running only on one CPU simultaneously.
392
393    Main feature differing them of BHs: different tasklets
394    may be run simultaneously on different CPUs.
395
396    Properties:
397    * If tasklet_schedule() is called, then tasklet is guaranteed
398      to be executed on some cpu at least once after this.
399    * If the tasklet is already scheduled, but its excecution is still not
400      started, it will be executed only once.
401    * If this tasklet is already running on another CPU (or schedule is called
402      from tasklet itself), it is rescheduled for later.
403    * Tasklet is strictly serialized wrt itself, but not
404      wrt another tasklets. If client needs some intertask synchronization,
405      he makes it with spinlocks.
406  */
407
408 struct tasklet_struct
409 {
410         struct tasklet_struct *next;
411         unsigned long state;
412         atomic_t count;
413         void (*func)(unsigned long);
414         unsigned long data;
415 };
416
417 #define DECLARE_TASKLET(name, func, data) \
418 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
419
420 #define DECLARE_TASKLET_DISABLED(name, func, data) \
421 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
422
423
424 enum
425 {
426         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
427         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
428 };
429
430 #ifdef CONFIG_SMP
431 static inline int tasklet_trylock(struct tasklet_struct *t)
432 {
433         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
434 }
435
436 static inline void tasklet_unlock(struct tasklet_struct *t)
437 {
438         smp_mb__before_clear_bit(); 
439         clear_bit(TASKLET_STATE_RUN, &(t)->state);
440 }
441
442 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
443 {
444         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
445 }
446 #else
447 #define tasklet_trylock(t) 1
448 #define tasklet_unlock_wait(t) do { } while (0)
449 #define tasklet_unlock(t) do { } while (0)
450 #endif
451
452 extern void __tasklet_schedule(struct tasklet_struct *t);
453
454 static inline void tasklet_schedule(struct tasklet_struct *t)
455 {
456         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
457                 __tasklet_schedule(t);
458 }
459
460 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
461
462 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
463 {
464         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
465                 __tasklet_hi_schedule(t);
466 }
467
468
469 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
470 {
471         atomic_inc(&t->count);
472         smp_mb__after_atomic_inc();
473 }
474
475 static inline void tasklet_disable(struct tasklet_struct *t)
476 {
477         tasklet_disable_nosync(t);
478         tasklet_unlock_wait(t);
479         smp_mb();
480 }
481
482 static inline void tasklet_enable(struct tasklet_struct *t)
483 {
484         smp_mb__before_atomic_dec();
485         atomic_dec(&t->count);
486 }
487
488 static inline void tasklet_hi_enable(struct tasklet_struct *t)
489 {
490         smp_mb__before_atomic_dec();
491         atomic_dec(&t->count);
492 }
493
494 extern void tasklet_kill(struct tasklet_struct *t);
495 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
496 extern void tasklet_init(struct tasklet_struct *t,
497                          void (*func)(unsigned long), unsigned long data);
498
499 /*
500  * Autoprobing for irqs:
501  *
502  * probe_irq_on() and probe_irq_off() provide robust primitives
503  * for accurate IRQ probing during kernel initialization.  They are
504  * reasonably simple to use, are not "fooled" by spurious interrupts,
505  * and, unlike other attempts at IRQ probing, they do not get hung on
506  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
507  *
508  * For reasonably foolproof probing, use them as follows:
509  *
510  * 1. clear and/or mask the device's internal interrupt.
511  * 2. sti();
512  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
513  * 4. enable the device and cause it to trigger an interrupt.
514  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
515  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
516  * 7. service the device to clear its pending interrupt.
517  * 8. loop again if paranoia is required.
518  *
519  * probe_irq_on() returns a mask of allocated irq's.
520  *
521  * probe_irq_off() takes the mask as a parameter,
522  * and returns the irq number which occurred,
523  * or zero if none occurred, or a negative irq number
524  * if more than one irq occurred.
525  */
526
527 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
528 static inline unsigned long probe_irq_on(void)
529 {
530         return 0;
531 }
532 static inline int probe_irq_off(unsigned long val)
533 {
534         return 0;
535 }
536 static inline unsigned int probe_irq_mask(unsigned long val)
537 {
538         return 0;
539 }
540 #else
541 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
542 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
543 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
544 #endif
545
546 #ifdef CONFIG_PROC_FS
547 /* Initialize /proc/irq/ */
548 extern void init_irq_proc(void);
549 #else
550 static inline void init_irq_proc(void)
551 {
552 }
553 #endif
554
555 #if defined(CONFIG_GENERIC_HARDIRQS) && defined(CONFIG_DEBUG_SHIRQ)
556 extern void debug_poll_all_shared_irqs(void);
557 #else
558 static inline void debug_poll_all_shared_irqs(void) { }
559 #endif
560
561 int show_interrupts(struct seq_file *p, void *v);
562
563 struct irq_desc;
564
565 extern int early_irq_init(void);
566 extern int arch_probe_nr_irqs(void);
567 extern int arch_early_irq_init(void);
568 extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
569
570 #endif