]> git.karo-electronics.de Git - mv-sheeva.git/blob - include/linux/lis3lv02d.h
hwmon: lis3: New parameters to platform data
[mv-sheeva.git] / include / linux / lis3lv02d.h
1 #ifndef __LIS3LV02D_H_
2 #define __LIS3LV02D_H_
3
4 struct lis3lv02d_platform_data {
5         /* please note: the 'click' feature is only supported for
6          * LIS[32]02DL variants of the chip and will be ignored for
7          * others */
8 #define LIS3_CLICK_SINGLE_X     (1 << 0)
9 #define LIS3_CLICK_DOUBLE_X     (1 << 1)
10 #define LIS3_CLICK_SINGLE_Y     (1 << 2)
11 #define LIS3_CLICK_DOUBLE_Y     (1 << 3)
12 #define LIS3_CLICK_SINGLE_Z     (1 << 4)
13 #define LIS3_CLICK_DOUBLE_Z     (1 << 5)
14         unsigned char click_flags;
15         unsigned char click_thresh_x;
16         unsigned char click_thresh_y;
17         unsigned char click_thresh_z;
18         unsigned char click_time_limit;
19         unsigned char click_latency;
20         unsigned char click_window;
21
22 #define LIS3_IRQ1_DISABLE       (0 << 0)
23 #define LIS3_IRQ1_FF_WU_1       (1 << 0)
24 #define LIS3_IRQ1_FF_WU_2       (2 << 0)
25 #define LIS3_IRQ1_FF_WU_12      (3 << 0)
26 #define LIS3_IRQ1_DATA_READY    (4 << 0)
27 #define LIS3_IRQ1_CLICK         (7 << 0)
28 #define LIS3_IRQ1_MASK          (7 << 0)
29 #define LIS3_IRQ2_DISABLE       (0 << 3)
30 #define LIS3_IRQ2_FF_WU_1       (1 << 3)
31 #define LIS3_IRQ2_FF_WU_2       (2 << 3)
32 #define LIS3_IRQ2_FF_WU_12      (3 << 3)
33 #define LIS3_IRQ2_DATA_READY    (4 << 3)
34 #define LIS3_IRQ2_CLICK         (7 << 3)
35 #define LIS3_IRQ2_MASK          (7 << 3)
36 #define LIS3_IRQ_OPEN_DRAIN     (1 << 6)
37 #define LIS3_IRQ_ACTIVE_LOW     (1 << 7)
38         unsigned char irq_cfg;
39         unsigned char irq_flags1; /* Additional irq edge / level flags */
40         unsigned char irq_flags2; /* Additional irq edge / level flags */
41         unsigned char duration1;
42         unsigned char duration2;
43 #define LIS3_WAKEUP_X_LO        (1 << 0)
44 #define LIS3_WAKEUP_X_HI        (1 << 1)
45 #define LIS3_WAKEUP_Y_LO        (1 << 2)
46 #define LIS3_WAKEUP_Y_HI        (1 << 3)
47 #define LIS3_WAKEUP_Z_LO        (1 << 4)
48 #define LIS3_WAKEUP_Z_HI        (1 << 5)
49         unsigned char wakeup_flags;
50         unsigned char wakeup_thresh;
51         unsigned char wakeup_flags2;
52         unsigned char wakeup_thresh2;
53 #define LIS3_HIPASS_CUTFF_8HZ   0
54 #define LIS3_HIPASS_CUTFF_4HZ   1
55 #define LIS3_HIPASS_CUTFF_2HZ   2
56 #define LIS3_HIPASS_CUTFF_1HZ   3
57 #define LIS3_HIPASS1_DISABLE    (1 << 2)
58 #define LIS3_HIPASS2_DISABLE    (1 << 3)
59         unsigned char hipass_ctrl;
60 #define LIS3_NO_MAP             0
61 #define LIS3_DEV_X              1
62 #define LIS3_DEV_Y              2
63 #define LIS3_DEV_Z              3
64 #define LIS3_INV_DEV_X         -1
65 #define LIS3_INV_DEV_Y         -2
66 #define LIS3_INV_DEV_Z         -3
67         s8 axis_x;
68         s8 axis_y;
69         s8 axis_z;
70 #define LIS3_USE_REGULATOR_CTRL 0x01
71         u16 driver_features;
72         int default_rate;
73         int (*setup_resources)(void);
74         int (*release_resources)(void);
75         /* Limits for selftest are specified in chip data sheet */
76         s16 st_min_limits[3]; /* min pass limit x, y, z */
77         s16 st_max_limits[3]; /* max pass limit x, y, z */
78         int irq2;
79 };
80
81 #endif /* __LIS3LV02D_H_ */