]> git.karo-electronics.de Git - karo-tx-linux.git/blob - include/linux/mdio.h
55a80d73cfc18b0bac7820e8d4fe071aee4d07e8
[karo-tx-linux.git] / include / linux / mdio.h
1 /*
2  * linux/mdio.h: definitions for MDIO (clause 45) transceivers
3  * Copyright 2006-2009 Solarflare Communications Inc.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License version 2 as published
7  * by the Free Software Foundation, incorporated herein by reference.
8  */
9 #ifndef __LINUX_MDIO_H__
10 #define __LINUX_MDIO_H__
11
12 #include <uapi/linux/mdio.h>
13
14 struct mii_bus;
15
16 /* Multiple levels of nesting are possible. However typically this is
17  * limited to nested DSA like layer, a MUX layer, and the normal
18  * user. Instead of trying to handle the general case, just define
19  * these cases.
20  */
21 enum mdio_mutex_lock_class {
22         MDIO_MUTEX_NORMAL,
23         MDIO_MUTEX_MUX,
24         MDIO_MUTEX_NESTED,
25 };
26
27 struct mdio_device {
28         struct device dev;
29
30         const struct dev_pm_ops *pm_ops;
31         struct mii_bus *bus;
32
33         int (*bus_match)(struct device *dev, struct device_driver *drv);
34         void (*device_free)(struct mdio_device *mdiodev);
35         void (*device_remove)(struct mdio_device *mdiodev);
36
37         /* Bus address of the MDIO device (0-31) */
38         int addr;
39         int flags;
40 };
41 #define to_mdio_device(d) container_of(d, struct mdio_device, dev)
42
43 /* struct mdio_driver_common: Common to all MDIO drivers */
44 struct mdio_driver_common {
45         struct device_driver driver;
46         int flags;
47 };
48 #define MDIO_DEVICE_FLAG_PHY            1
49 #define to_mdio_common_driver(d) \
50         container_of(d, struct mdio_driver_common, driver)
51
52 /* struct mdio_driver: Generic MDIO driver */
53 struct mdio_driver {
54         struct mdio_driver_common mdiodrv;
55
56         /*
57          * Called during discovery.  Used to set
58          * up device-specific structures, if any
59          */
60         int (*probe)(struct mdio_device *mdiodev);
61
62         /* Clears up any memory if needed */
63         void (*remove)(struct mdio_device *mdiodev);
64 };
65 #define to_mdio_driver(d)                                               \
66         container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)
67
68 void mdio_device_free(struct mdio_device *mdiodev);
69 struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
70 int mdio_device_register(struct mdio_device *mdiodev);
71 void mdio_device_remove(struct mdio_device *mdiodev);
72 int mdio_driver_register(struct mdio_driver *drv);
73 void mdio_driver_unregister(struct mdio_driver *drv);
74
75 static inline bool mdio_phy_id_is_c45(int phy_id)
76 {
77         return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
78 }
79
80 static inline __u16 mdio_phy_id_prtad(int phy_id)
81 {
82         return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
83 }
84
85 static inline __u16 mdio_phy_id_devad(int phy_id)
86 {
87         return phy_id & MDIO_PHY_ID_DEVAD;
88 }
89
90 /**
91  * struct mdio_if_info - Ethernet controller MDIO interface
92  * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
93  * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
94  *      non-zero unless @prtad = %MDIO_PRTAD_NONE.
95  * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
96  *      MII register access will be passed through with @devad =
97  *      %MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
98  *      commonly used clause 22 registers will be translated into
99  *      clause 45 registers.
100  * @dev: Net device structure
101  * @mdio_read: Register read function; returns value or negative error code
102  * @mdio_write: Register write function; returns 0 or negative error code
103  */
104 struct mdio_if_info {
105         int prtad;
106         u32 mmds;
107         unsigned mode_support;
108
109         struct net_device *dev;
110         int (*mdio_read)(struct net_device *dev, int prtad, int devad,
111                          u16 addr);
112         int (*mdio_write)(struct net_device *dev, int prtad, int devad,
113                           u16 addr, u16 val);
114 };
115
116 #define MDIO_PRTAD_NONE                 (-1)
117 #define MDIO_DEVAD_NONE                 (-1)
118 #define MDIO_SUPPORTS_C22               1
119 #define MDIO_SUPPORTS_C45               2
120 #define MDIO_EMULATE_C22                4
121
122 struct ethtool_cmd;
123 struct ethtool_pauseparam;
124 extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
125 extern int mdio_set_flag(const struct mdio_if_info *mdio,
126                          int prtad, int devad, u16 addr, int mask,
127                          bool sense);
128 extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
129 extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
130 extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
131                                       struct ethtool_cmd *ecmd,
132                                       u32 npage_adv, u32 npage_lpa);
133 extern void
134 mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
135                                    struct ethtool_link_ksettings *cmd,
136                                    u32 npage_adv, u32 npage_lpa);
137
138 /**
139  * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
140  * @mdio: MDIO interface
141  * @ecmd: Ethtool request structure
142  *
143  * Since the CSRs for auto-negotiation using next pages are not fully
144  * standardised, this function does not attempt to decode them.  Use
145  * mdio45_ethtool_gset_npage() to specify advertisement bits from next
146  * pages.
147  */
148 static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
149                                        struct ethtool_cmd *ecmd)
150 {
151         mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
152 }
153
154 /**
155  * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
156  * @mdio: MDIO interface
157  * @cmd: Ethtool request structure
158  *
159  * Since the CSRs for auto-negotiation using next pages are not fully
160  * standardised, this function does not attempt to decode them.  Use
161  * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
162  * from next pages.
163  */
164 static inline void
165 mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
166                              struct ethtool_link_ksettings *cmd)
167 {
168         mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
169 }
170
171 extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
172                           struct mii_ioctl_data *mii_data, int cmd);
173
174 /**
175  * mmd_eee_cap_to_ethtool_sup_t
176  * @eee_cap: value of the MMD EEE Capability register
177  *
178  * A small helper function that translates MMD EEE Capability (3.20) bits
179  * to ethtool supported settings.
180  */
181 static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)
182 {
183         u32 supported = 0;
184
185         if (eee_cap & MDIO_EEE_100TX)
186                 supported |= SUPPORTED_100baseT_Full;
187         if (eee_cap & MDIO_EEE_1000T)
188                 supported |= SUPPORTED_1000baseT_Full;
189         if (eee_cap & MDIO_EEE_10GT)
190                 supported |= SUPPORTED_10000baseT_Full;
191         if (eee_cap & MDIO_EEE_1000KX)
192                 supported |= SUPPORTED_1000baseKX_Full;
193         if (eee_cap & MDIO_EEE_10GKX4)
194                 supported |= SUPPORTED_10000baseKX4_Full;
195         if (eee_cap & MDIO_EEE_10GKR)
196                 supported |= SUPPORTED_10000baseKR_Full;
197
198         return supported;
199 }
200
201 /**
202  * mmd_eee_adv_to_ethtool_adv_t
203  * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers
204  *
205  * A small helper function that translates the MMD EEE Advertisment (7.60)
206  * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement
207  * settings.
208  */
209 static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)
210 {
211         u32 adv = 0;
212
213         if (eee_adv & MDIO_EEE_100TX)
214                 adv |= ADVERTISED_100baseT_Full;
215         if (eee_adv & MDIO_EEE_1000T)
216                 adv |= ADVERTISED_1000baseT_Full;
217         if (eee_adv & MDIO_EEE_10GT)
218                 adv |= ADVERTISED_10000baseT_Full;
219         if (eee_adv & MDIO_EEE_1000KX)
220                 adv |= ADVERTISED_1000baseKX_Full;
221         if (eee_adv & MDIO_EEE_10GKX4)
222                 adv |= ADVERTISED_10000baseKX4_Full;
223         if (eee_adv & MDIO_EEE_10GKR)
224                 adv |= ADVERTISED_10000baseKR_Full;
225
226         return adv;
227 }
228
229 /**
230  * ethtool_adv_to_mmd_eee_adv_t
231  * @adv: the ethtool advertisement settings
232  *
233  * A small helper function that translates ethtool advertisement settings
234  * to EEE advertisements for the MMD EEE Advertisement (7.60) and
235  * MMD EEE Link Partner Ability (7.61) registers.
236  */
237 static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
238 {
239         u16 reg = 0;
240
241         if (adv & ADVERTISED_100baseT_Full)
242                 reg |= MDIO_EEE_100TX;
243         if (adv & ADVERTISED_1000baseT_Full)
244                 reg |= MDIO_EEE_1000T;
245         if (adv & ADVERTISED_10000baseT_Full)
246                 reg |= MDIO_EEE_10GT;
247         if (adv & ADVERTISED_1000baseKX_Full)
248                 reg |= MDIO_EEE_1000KX;
249         if (adv & ADVERTISED_10000baseKX4_Full)
250                 reg |= MDIO_EEE_10GKX4;
251         if (adv & ADVERTISED_10000baseKR_Full)
252                 reg |= MDIO_EEE_10GKR;
253
254         return reg;
255 }
256
257 int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
258 int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
259 int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
260 int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);
261
262 int mdiobus_register_device(struct mdio_device *mdiodev);
263 int mdiobus_unregister_device(struct mdio_device *mdiodev);
264 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
265 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
266
267 /**
268  * mdio_module_driver() - Helper macro for registering mdio drivers
269  *
270  * Helper macro for MDIO drivers which do not do anything special in module
271  * init/exit. Each module may only use this macro once, and calling it
272  * replaces module_init() and module_exit().
273  */
274 #define mdio_module_driver(_mdio_driver)                                \
275 static int __init mdio_module_init(void)                                \
276 {                                                                       \
277         return mdio_driver_register(&_mdio_driver);                     \
278 }                                                                       \
279 module_init(mdio_module_init);                                          \
280 static void __exit mdio_module_exit(void)                               \
281 {                                                                       \
282         mdio_driver_unregister(&_mdio_driver);                          \
283 }                                                                       \
284 module_exit(mdio_module_exit)
285
286 #endif /* __LINUX_MDIO_H__ */