2 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23 #include <linux/types.h>
24 #include <linux/uio.h>
25 #include <linux/notifier.h>
26 #include <linux/device.h>
29 #include <mtd/mtd-abi.h>
31 #include <asm/div64.h>
33 #define MTD_ERASE_PENDING 0x01
34 #define MTD_ERASING 0x02
35 #define MTD_ERASE_SUSPEND 0x04
36 #define MTD_ERASE_DONE 0x08
37 #define MTD_ERASE_FAILED 0x10
39 #define MTD_FAIL_ADDR_UNKNOWN -1LL
42 * If the erase fails, fail_addr might indicate exactly which block failed. If
43 * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
44 * or was not specific to any particular block.
55 void (*callback) (struct erase_info *self);
58 struct erase_info *next;
61 struct mtd_erase_region_info {
62 uint64_t offset; /* At which this region starts, from the beginning of the MTD */
63 uint32_t erasesize; /* For this region */
64 uint32_t numblocks; /* Number of blocks of erasesize in this region */
65 unsigned long *lockmap; /* If keeping bitmap of locks */
69 * struct mtd_oob_ops - oob operation operands
70 * @mode: operation mode
72 * @len: number of data bytes to write/read
74 * @retlen: number of data bytes written/read
76 * @ooblen: number of oob bytes to write/read
77 * @oobretlen: number of oob bytes written/read
78 * @ooboffs: offset of oob data in the oob area (only relevant when
79 * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
80 * @datbuf: data buffer - if NULL only oob data are read/written
81 * @oobbuf: oob data buffer
83 * Note, it is allowed to read more than one OOB area at one go, but not write.
84 * The interface assumes that the OOB write requests program only one page's
98 #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
99 #define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
101 * struct mtd_oob_region - oob region definition
102 * @offset: region offset
103 * @length: region length
105 * This structure describes a region of the OOB area, and is used
106 * to retrieve ECC or free bytes sections.
107 * Each section is defined by an offset within the OOB area and a
110 struct mtd_oob_region {
116 * struct mtd_ooblayout_ops - NAND OOB layout operations
117 * @ecc: function returning an ECC region in the OOB area.
118 * Should return -ERANGE if %section exceeds the total number of
120 * @free: function returning a free region in the OOB area.
121 * Should return -ERANGE if %section exceeds the total number of
124 struct mtd_ooblayout_ops {
125 int (*ecc)(struct mtd_info *mtd, int section,
126 struct mtd_oob_region *oobecc);
127 int (*free)(struct mtd_info *mtd, int section,
128 struct mtd_oob_region *oobfree);
132 * struct mtd_pairing_info - page pairing information
137 * The term "pair" is used here, even though TLC NANDs might group pages by 3
138 * (3 bits in a single cell). A pair should regroup all pages that are sharing
139 * the same cell. Pairs are then indexed in ascending order.
141 * @group is defining the position of a page in a given pair. It can also be
142 * seen as the bit position in the cell: page attached to bit 0 belongs to
143 * group 0, page attached to bit 1 belongs to group 1, etc.
146 * The H27UCG8T2BTR-BC datasheet describes the following pairing scheme:
150 * pair-0 page-0 page-4
151 * pair-1 page-1 page-5
152 * pair-2 page-2 page-8
154 * pair-127 page-251 page-255
157 * Note that the "group" and "pair" terms were extracted from Samsung and
158 * Hynix datasheets, and might be referenced under other names in other
159 * datasheets (Micron is describing this concept as "shared pages").
161 struct mtd_pairing_info {
167 * struct mtd_pairing_scheme - page pairing scheme description
169 * @ngroups: number of groups. Should be related to the number of bits
171 * @get_info: converts a write-unit (page number within an erase block) into
172 * mtd_pairing information (pair + group). This function should
173 * fill the info parameter based on the wunit index or return
174 * -EINVAL if the wunit parameter is invalid.
175 * @get_wunit: converts pairing information into a write-unit (page) number.
176 * This function should return the wunit index pointed by the
177 * pairing information described in the info argument. It should
178 * return -EINVAL, if there's no wunit corresponding to the
179 * passed pairing information.
181 * See mtd_pairing_info documentation for a detailed explanation of the
182 * pair and group concepts.
184 * The mtd_pairing_scheme structure provides a generic solution to represent
185 * NAND page pairing scheme. Instead of exposing two big tables to do the
186 * write-unit <-> (pair + group) conversions, we ask the MTD drivers to
187 * implement the ->get_info() and ->get_wunit() functions.
189 * MTD users will then be able to query these information by using the
190 * mtd_pairing_info_to_wunit() and mtd_wunit_to_pairing_info() helpers.
192 * @ngroups is here to help MTD users iterating over all the pages in a
193 * given pair. This value can be retrieved by MTD users using the
194 * mtd_pairing_groups() helper.
196 * Examples are given in the mtd_pairing_info_to_wunit() and
197 * mtd_wunit_to_pairing_info() documentation.
199 struct mtd_pairing_scheme {
201 int (*get_info)(struct mtd_info *mtd, int wunit,
202 struct mtd_pairing_info *info);
203 int (*get_wunit)(struct mtd_info *mtd,
204 const struct mtd_pairing_info *info);
207 struct module; /* only needed for owner field in mtd_info */
212 uint64_t size; // Total size of the MTD
214 /* "Major" erase size for the device. Naïve users may take this
215 * to be the only erase size available, or may use the more detailed
216 * information below if they desire
219 /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
220 * though individual bits can be cleared), in case of NAND flash it is
221 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
222 * it is of ECC block size, etc. It is illegal to have writesize = 0.
223 * Any driver registering a struct mtd_info must ensure a writesize of
229 * Size of the write buffer used by the MTD. MTD devices having a write
230 * buffer can write multiple writesize chunks at a time. E.g. while
231 * writing 4 * writesize bytes to a device with 2 * writesize bytes
232 * buffer the MTD driver can (but doesn't have to) do 2 writesize
233 * operations, but not 4. Currently, all NANDs have writebufsize
234 * equivalent to writesize (NAND page size). Some NOR flashes do have
235 * writebufsize greater than writesize.
237 uint32_t writebufsize;
239 uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
240 uint32_t oobavail; // Available OOB bytes per block
243 * If erasesize is a power of 2 then the shift is stored in
244 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
246 unsigned int erasesize_shift;
247 unsigned int writesize_shift;
248 /* Masks based on erasesize_shift and writesize_shift */
249 unsigned int erasesize_mask;
250 unsigned int writesize_mask;
253 * read ops return -EUCLEAN if max number of bitflips corrected on any
254 * one region comprising an ecc step equals or exceeds this value.
255 * Settable by driver, else defaults to ecc_strength. User can override
256 * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed;
257 * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
259 unsigned int bitflip_threshold;
261 // Kernel-only stuff starts here.
265 /* OOB layout description */
266 const struct mtd_ooblayout_ops *ooblayout;
268 /* NAND pairing scheme, only provided for MLC/TLC NANDs */
269 const struct mtd_pairing_scheme *pairing;
271 /* the ecc step size. */
272 unsigned int ecc_step_size;
274 /* max number of correctible bit errors per ecc step */
275 unsigned int ecc_strength;
277 /* Data for variable erase regions. If numeraseregions is zero,
278 * it means that the whole device has erasesize as given above.
281 struct mtd_erase_region_info *eraseregions;
284 * Do not call via these pointers, use corresponding mtd_*()
287 int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
288 int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
289 size_t *retlen, void **virt, resource_size_t *phys);
290 int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
291 unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
293 unsigned long offset,
294 unsigned long flags);
295 int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
296 size_t *retlen, u_char *buf);
297 int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
298 size_t *retlen, const u_char *buf);
299 int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
300 size_t *retlen, const u_char *buf);
301 int (*_read_oob) (struct mtd_info *mtd, loff_t from,
302 struct mtd_oob_ops *ops);
303 int (*_write_oob) (struct mtd_info *mtd, loff_t to,
304 struct mtd_oob_ops *ops);
305 int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
306 size_t *retlen, struct otp_info *buf);
307 int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
308 size_t len, size_t *retlen, u_char *buf);
309 int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
310 size_t *retlen, struct otp_info *buf);
311 int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
312 size_t len, size_t *retlen, u_char *buf);
313 int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
314 size_t len, size_t *retlen, u_char *buf);
315 int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
317 int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
318 unsigned long count, loff_t to, size_t *retlen);
319 void (*_sync) (struct mtd_info *mtd);
320 int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
321 int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
322 int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
323 int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
324 int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
325 int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
326 int (*_max_bad_blocks) (struct mtd_info *mtd, loff_t ofs, size_t len);
327 int (*_suspend) (struct mtd_info *mtd);
328 void (*_resume) (struct mtd_info *mtd);
329 void (*_reboot) (struct mtd_info *mtd);
331 * If the driver is something smart, like UBI, it may need to maintain
332 * its own reference counting. The below functions are only for driver.
334 int (*_get_device) (struct mtd_info *mtd);
335 void (*_put_device) (struct mtd_info *mtd);
337 struct notifier_block reboot_notifier; /* default mode before reboot */
339 /* ECC status information */
340 struct mtd_ecc_stats ecc_stats;
341 /* Subpage shift (NAND) */
346 struct module *owner;
351 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
352 struct mtd_oob_region *oobecc);
353 int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
355 struct mtd_oob_region *oobregion);
356 int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
357 const u8 *oobbuf, int start, int nbytes);
358 int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
359 u8 *oobbuf, int start, int nbytes);
360 int mtd_ooblayout_free(struct mtd_info *mtd, int section,
361 struct mtd_oob_region *oobfree);
362 int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
363 const u8 *oobbuf, int start, int nbytes);
364 int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
365 u8 *oobbuf, int start, int nbytes);
366 int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
367 int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);
369 static inline void mtd_set_ooblayout(struct mtd_info *mtd,
370 const struct mtd_ooblayout_ops *ooblayout)
372 mtd->ooblayout = ooblayout;
375 static inline void mtd_set_pairing_scheme(struct mtd_info *mtd,
376 const struct mtd_pairing_scheme *pairing)
378 mtd->pairing = pairing;
381 static inline void mtd_set_of_node(struct mtd_info *mtd,
382 struct device_node *np)
384 mtd->dev.of_node = np;
386 of_property_read_string(np, "label", &mtd->name);
389 static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
391 return mtd->dev.of_node;
394 static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
396 return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
399 static inline int mtd_max_bad_blocks(struct mtd_info *mtd,
400 loff_t ofs, size_t len)
402 if (!mtd->_max_bad_blocks)
405 if (mtd->size < (len + ofs) || ofs < 0)
408 return mtd->_max_bad_blocks(mtd, ofs, len);
411 int mtd_wunit_to_pairing_info(struct mtd_info *mtd, int wunit,
412 struct mtd_pairing_info *info);
413 int mtd_pairing_info_to_wunit(struct mtd_info *mtd,
414 const struct mtd_pairing_info *info);
415 int mtd_pairing_groups(struct mtd_info *mtd);
416 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
417 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
418 void **virt, resource_size_t *phys);
419 int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
420 unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
421 unsigned long offset, unsigned long flags);
422 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
424 int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
426 int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
429 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
430 int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);
432 int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
433 struct otp_info *buf);
434 int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
435 size_t *retlen, u_char *buf);
436 int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
437 struct otp_info *buf);
438 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
439 size_t *retlen, u_char *buf);
440 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
441 size_t *retlen, u_char *buf);
442 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
444 int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
445 unsigned long count, loff_t to, size_t *retlen);
447 static inline void mtd_sync(struct mtd_info *mtd)
453 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
454 int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
455 int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
456 int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs);
457 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
458 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
460 static inline int mtd_suspend(struct mtd_info *mtd)
462 return mtd->_suspend ? mtd->_suspend(mtd) : 0;
465 static inline void mtd_resume(struct mtd_info *mtd)
471 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
473 if (mtd->erasesize_shift)
474 return sz >> mtd->erasesize_shift;
475 do_div(sz, mtd->erasesize);
479 static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
481 if (mtd->erasesize_shift)
482 return sz & mtd->erasesize_mask;
483 return do_div(sz, mtd->erasesize);
486 static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
488 if (mtd->writesize_shift)
489 return sz >> mtd->writesize_shift;
490 do_div(sz, mtd->writesize);
494 static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
496 if (mtd->writesize_shift)
497 return sz & mtd->writesize_mask;
498 return do_div(sz, mtd->writesize);
501 static inline int mtd_wunit_per_eb(struct mtd_info *mtd)
503 return mtd->erasesize / mtd->writesize;
506 static inline int mtd_offset_to_wunit(struct mtd_info *mtd, loff_t offs)
508 return mtd_div_by_ws(mtd_mod_by_eb(offs, mtd), mtd);
511 static inline loff_t mtd_wunit_to_offset(struct mtd_info *mtd, loff_t base,
514 return base + (wunit * mtd->writesize);
518 static inline int mtd_has_oob(const struct mtd_info *mtd)
520 return mtd->_read_oob && mtd->_write_oob;
523 static inline int mtd_type_is_nand(const struct mtd_info *mtd)
525 return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
528 static inline int mtd_can_have_bb(const struct mtd_info *mtd)
530 return !!mtd->_block_isbad;
533 /* Kernel-side ioctl definitions */
535 struct mtd_partition;
536 struct mtd_part_parser_data;
538 extern int mtd_device_parse_register(struct mtd_info *mtd,
539 const char * const *part_probe_types,
540 struct mtd_part_parser_data *parser_data,
541 const struct mtd_partition *defparts,
543 #define mtd_device_register(master, parts, nr_parts) \
544 mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
545 extern int mtd_device_unregister(struct mtd_info *master);
546 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
547 extern int __get_mtd_device(struct mtd_info *mtd);
548 extern void __put_mtd_device(struct mtd_info *mtd);
549 extern struct mtd_info *get_mtd_device_nm(const char *name);
550 extern void put_mtd_device(struct mtd_info *mtd);
553 struct mtd_notifier {
554 void (*add)(struct mtd_info *mtd);
555 void (*remove)(struct mtd_info *mtd);
556 struct list_head list;
560 extern void register_mtd_user (struct mtd_notifier *new);
561 extern int unregister_mtd_user (struct mtd_notifier *old);
562 void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
564 void mtd_erase_callback(struct erase_info *instr);
566 static inline int mtd_is_bitflip(int err) {
567 return err == -EUCLEAN;
570 static inline int mtd_is_eccerr(int err) {
571 return err == -EBADMSG;
574 static inline int mtd_is_bitflip_or_eccerr(int err) {
575 return mtd_is_bitflip(err) || mtd_is_eccerr(err);
578 unsigned mtd_mmap_capabilities(struct mtd_info *mtd);
580 #endif /* __MTD_MTD_H__ */