2 * linux/drivers/char/serial_core.h
4 * Copyright (C) 2000 Deep Blue Solutions Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #ifndef LINUX_SERIAL_CORE_H
21 #define LINUX_SERIAL_CORE_H
23 #include <linux/serial.h>
26 * The type definitions. These are from Ted Ts'o's serial.h
28 #define PORT_UNKNOWN 0
35 #define PORT_16650V2 7
37 #define PORT_STARTECH 9
38 #define PORT_16C950 10
42 #define PORT_NS16550A 14
43 #define PORT_XSCALE 15
44 #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
45 #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
46 #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
47 #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
48 #define PORT_MAX_8250 19 /* max port ID */
51 * ARM specific type numbers. These are not currently guaranteed
52 * to be implemented, and will change in the future. These are
53 * separate so any additions to the old serial.c that occur before
54 * we are merged can be easily merged here.
58 #define PORT_CLPS711X 33
59 #define PORT_SA1100 34
60 #define PORT_UART00 35
63 /* Sparc type numbers. */
64 #define PORT_SUNZILOG 38
65 #define PORT_SUNSAB 39
71 /* Parisc type numbers. */
74 /* Atmel AT91 / AT32 SoC */
77 /* Macintosh Zilog type numbers */
78 #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
79 #define PORT_PMAC_ZILOG 51
86 /* Samsung S3C2410 SoC and derivatives thereof */
87 #define PORT_S3C2410 55
89 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */
90 #define PORT_IP22ZILOG 56
92 /* Sharp LH7a40x -- an ARM9 SoC series */
93 #define PORT_LH7A40X 57
95 /* PPC CPM type number */
98 /* MPC52xx (and MPC512x) type numbers */
99 #define PORT_MPC52xx 59
104 /* Samsung S3C2440 SoC */
105 #define PORT_S3C2440 61
107 /* Motorola i.MX SoC */
113 /* TXX9 type number */
116 /* NEC VR4100 series SIU/DSIU */
117 #define PORT_VR41XX_SIU 65
118 #define PORT_VR41XX_DSIU 66
120 /* Samsung S3C2400 SoC */
121 #define PORT_S3C2400 67
124 #define PORT_M32R_SIO 68
129 #define PORT_PNX8XXX 70
134 /* SUN4V Hypervisor Console */
135 #define PORT_SUNHV 72
137 #define PORT_S3C2412 73
139 /* Xilinx uartlite */
140 #define PORT_UARTLITE 74
146 #define PORT_KS8695 76
148 /* Broadcom SB1250, etc. SOC */
149 #define PORT_SB1250_DUART 77
151 /* Freescale ColdFire */
155 #define PORT_BFIN_SPORT 79
157 /* MN10300 on-chip UART numbers */
158 #define PORT_MN10300 80
159 #define PORT_MN10300_CTS 81
161 #define PORT_SC26XX 82
164 #define PORT_SCIFA 83
166 #define PORT_S3C6400 84
169 #define PORT_NWPSERIAL 85
172 #define PORT_MAX3100 86
174 /* Timberdale UART */
175 #define PORT_TIMBUART 87
177 /* Qualcomm MSM SoCs */
180 /* BCM63xx family SoCs */
181 #define PORT_BCM63XX 89
183 /* Aeroflex Gaisler GRLIB APBUART */
184 #define PORT_APBUART 90
187 #define PORT_ALTERA_JTAGUART 91
188 #define PORT_ALTERA_UART 92
191 #define PORT_SCIFB 93
194 #define PORT_MAX3107 94
196 /* High Speed UART for Medfield */
203 #define PORT_VT8500 97
207 #include <linux/compiler.h>
208 #include <linux/interrupt.h>
209 #include <linux/circ_buf.h>
210 #include <linux/spinlock.h>
211 #include <linux/sched.h>
212 #include <linux/tty.h>
213 #include <linux/mutex.h>
214 #include <linux/sysrq.h>
215 #include <linux/pps_kernel.h>
218 struct serial_struct;
222 * This structure describes all the operations that can be
223 * done on the physical hardware.
226 unsigned int (*tx_empty)(struct uart_port *);
227 void (*set_mctrl)(struct uart_port *, unsigned int mctrl);
228 unsigned int (*get_mctrl)(struct uart_port *);
229 void (*stop_tx)(struct uart_port *);
230 void (*start_tx)(struct uart_port *);
231 void (*send_xchar)(struct uart_port *, char ch);
232 void (*stop_rx)(struct uart_port *);
233 void (*enable_ms)(struct uart_port *);
234 void (*break_ctl)(struct uart_port *, int ctl);
235 int (*startup)(struct uart_port *);
236 void (*shutdown)(struct uart_port *);
237 void (*flush_buffer)(struct uart_port *);
238 void (*set_termios)(struct uart_port *, struct ktermios *new,
239 struct ktermios *old);
240 void (*set_ldisc)(struct uart_port *, int new);
241 void (*pm)(struct uart_port *, unsigned int state,
242 unsigned int oldstate);
243 int (*set_wake)(struct uart_port *, unsigned int state);
246 * Return a string describing the type of the port
248 const char *(*type)(struct uart_port *);
251 * Release IO and memory resources used by the port.
252 * This includes iounmap if necessary.
254 void (*release_port)(struct uart_port *);
257 * Request IO and memory resources used by the port.
258 * This includes iomapping the port if necessary.
260 int (*request_port)(struct uart_port *);
261 void (*config_port)(struct uart_port *, int);
262 int (*verify_port)(struct uart_port *, struct serial_struct *);
263 int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
264 #ifdef CONFIG_CONSOLE_POLL
265 void (*poll_put_char)(struct uart_port *, unsigned char);
266 int (*poll_get_char)(struct uart_port *);
270 #define NO_POLL_CHAR 0x00ff0000
271 #define UART_CONFIG_TYPE (1 << 0)
272 #define UART_CONFIG_IRQ (1 << 1)
288 typedef unsigned int __bitwise__ upf_t;
291 spinlock_t lock; /* port lock */
292 unsigned long iobase; /* in/out[bwl] */
293 unsigned char __iomem *membase; /* read/write[bwl] */
294 unsigned int (*serial_in)(struct uart_port *, int);
295 void (*serial_out)(struct uart_port *, int, int);
296 void (*set_termios)(struct uart_port *,
297 struct ktermios *new,
298 struct ktermios *old);
299 void (*pm)(struct uart_port *, unsigned int state,
301 unsigned int irq; /* irq number */
302 unsigned long irqflags; /* irq flags */
303 unsigned int uartclk; /* base uart clock */
304 unsigned int fifosize; /* tx fifo size */
305 unsigned char x_char; /* xon/xoff char */
306 unsigned char regshift; /* reg offset shift */
307 unsigned char iotype; /* io access style */
308 unsigned char unused1;
310 #define UPIO_PORT (0)
311 #define UPIO_HUB6 (1)
313 #define UPIO_MEM32 (3)
314 #define UPIO_AU (4) /* Au1x00 type IO */
315 #define UPIO_TSI (5) /* Tsi108/109 type IO */
316 #define UPIO_DWAPB (6) /* DesignWare APB UART */
317 #define UPIO_RM9000 (7) /* RM9000 type IO */
318 #define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */
320 unsigned int read_status_mask; /* driver specific */
321 unsigned int ignore_status_mask; /* driver specific */
322 struct uart_state *state; /* pointer to parent state */
323 struct uart_icount icount; /* statistics */
325 struct console *cons; /* struct console, if any */
326 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
327 unsigned long sysrq; /* sysrq timeout */
332 #define UPF_FOURPORT ((__force upf_t) (1 << 1))
333 #define UPF_SAK ((__force upf_t) (1 << 2))
334 #define UPF_SPD_MASK ((__force upf_t) (0x1030))
335 #define UPF_SPD_HI ((__force upf_t) (0x0010))
336 #define UPF_SPD_VHI ((__force upf_t) (0x0020))
337 #define UPF_SPD_CUST ((__force upf_t) (0x0030))
338 #define UPF_SPD_SHI ((__force upf_t) (0x1000))
339 #define UPF_SPD_WARP ((__force upf_t) (0x1010))
340 #define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
341 #define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
342 #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
343 #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
344 #define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
345 #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
346 #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
347 #define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
348 #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
349 /* The exact UART type is known and should not be probed. */
350 #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
351 #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
352 #define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
353 #define UPF_DEAD ((__force upf_t) (1 << 30))
354 #define UPF_IOREMAP ((__force upf_t) (1 << 31))
356 #define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
357 #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
359 unsigned int mctrl; /* current modem ctrl settings */
360 unsigned int timeout; /* character-based timeout */
361 unsigned int type; /* port type */
362 const struct uart_ops *ops;
363 unsigned int custom_divisor;
364 unsigned int line; /* port index */
365 resource_size_t mapbase; /* for ioremap */
366 struct device *dev; /* parent device */
367 unsigned char hub6; /* this should be in the 8250 driver */
368 unsigned char suspended;
369 unsigned char irq_wake;
370 unsigned char unused[2];
371 void *private_data; /* generic platform data pointer */
375 * This is the state information which is persistent across opens.
378 struct tty_port port;
381 struct circ_buf xmit;
383 struct tasklet_struct tlet;
384 struct uart_port *uart_port;
387 #define UART_XMIT_SIZE PAGE_SIZE
390 /* number of characters left in xmit buffer before we ask for more */
391 #define WAKEUP_CHARS 256
397 struct module *owner;
398 const char *driver_name;
399 const char *dev_name;
403 struct console *cons;
406 * these are private; the low level driver should not
407 * touch these; they should be initialised to NULL
409 struct uart_state *state;
410 struct tty_driver *tty_driver;
413 void uart_write_wakeup(struct uart_port *port);
418 void uart_update_timeout(struct uart_port *port, unsigned int cflag,
420 unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
421 struct ktermios *old, unsigned int min,
423 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
425 /* Base timer interval for polling */
426 static inline int uart_poll_timeout(struct uart_port *port)
428 int timeout = port->timeout;
430 return timeout > 6 ? (timeout / 2 - 2) : 1;
436 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
438 void uart_parse_options(char *options, int *baud, int *parity, int *bits,
440 int uart_set_options(struct uart_port *port, struct console *co, int baud,
441 int parity, int bits, int flow);
442 struct tty_driver *uart_console_device(struct console *co, int *index);
443 void uart_console_write(struct uart_port *port, const char *s,
445 void (*putchar)(struct uart_port *, int));
448 * Port/driver registration/removal
450 int uart_register_driver(struct uart_driver *uart);
451 void uart_unregister_driver(struct uart_driver *uart);
452 int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
453 int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
454 int uart_match_port(struct uart_port *port1, struct uart_port *port2);
459 int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
460 int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
462 #define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
463 #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
465 #define uart_circ_chars_pending(circ) \
466 (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
468 #define uart_circ_chars_free(circ) \
469 (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
471 static inline int uart_tx_stopped(struct uart_port *port)
473 struct tty_struct *tty = port->state->port.tty;
474 if(tty->stopped || tty->hw_stopped)
480 * The following are helper functions for the low level drivers.
483 uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
487 if (ch && time_before(jiffies, port->sysrq)) {
497 #ifndef SUPPORT_SYSRQ
498 #define uart_handle_sysrq_char(port,ch) uart_handle_sysrq_char(port, 0)
502 * We do the SysRQ and SAK checking like this...
504 static inline int uart_handle_break(struct uart_port *port)
506 struct uart_state *state = port->state;
508 if (port->cons && port->cons->index == port->line) {
510 port->sysrq = jiffies + HZ*5;
516 if (port->flags & UPF_SAK)
517 do_SAK(state->port.tty);
522 * uart_handle_dcd_change - handle a change of carrier detect state
523 * @uport: uart_port structure for the open port
524 * @status: new carrier detect status, nonzero if active
527 uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
529 struct uart_state *state = uport->state;
530 struct tty_port *port = &state->port;
531 struct tty_ldisc *ld = tty_ldisc_ref(port->tty);
532 struct pps_event_time ts;
534 if (ld && ld->ops->dcd_change)
538 #ifdef CONFIG_HARD_PPS
539 if ((uport->flags & UPF_HARDPPS_CD) && status)
543 if (port->flags & ASYNC_CHECK_CD) {
545 wake_up_interruptible(&port->open_wait);
547 tty_hangup(port->tty);
550 if (ld && ld->ops->dcd_change)
551 ld->ops->dcd_change(port->tty, status, &ts);
557 * uart_handle_cts_change - handle a change of clear-to-send state
558 * @uport: uart_port structure for the open port
559 * @status: new clear to send status, nonzero if active
562 uart_handle_cts_change(struct uart_port *uport, unsigned int status)
564 struct tty_port *port = &uport->state->port;
565 struct tty_struct *tty = port->tty;
569 if (port->flags & ASYNC_CTS_FLOW) {
570 if (tty->hw_stopped) {
573 uport->ops->start_tx(uport);
574 uart_write_wakeup(uport);
579 uport->ops->stop_tx(uport);
585 #include <linux/tty_flip.h>
588 uart_insert_char(struct uart_port *port, unsigned int status,
589 unsigned int overrun, unsigned int ch, unsigned int flag)
591 struct tty_struct *tty = port->state->port.tty;
593 if ((status & port->ignore_status_mask & ~overrun) == 0)
594 tty_insert_flip_char(tty, ch, flag);
597 * Overrun is special. Since it's reported immediately,
598 * it doesn't affect the current character.
600 if (status & ~port->ignore_status_mask & overrun)
601 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
605 * UART_ENABLE_MS - determine if port should enable modem status irqs
607 #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
608 (cflag) & CRTSCTS || \
613 #endif /* LINUX_SERIAL_CORE_H */