]> git.karo-electronics.de Git - mv-sheeva.git/blob - include/media/ir-core.h
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
[mv-sheeva.git] / include / media / ir-core.h
1 /*
2  * Remote Controller core header
3  *
4  * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation version 2 of the License.
9  *
10  *  This program is distributed in the hope that it will be useful,
11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  *  GNU General Public License for more details.
14  */
15
16 #ifndef _IR_CORE
17 #define _IR_CORE
18
19 #include <linux/spinlock.h>
20 #include <linux/kfifo.h>
21 #include <linux/time.h>
22 #include <linux/timer.h>
23 #include <media/rc-map.h>
24
25 extern int ir_core_debug;
26 #define IR_dprintk(level, fmt, arg...)  if (ir_core_debug >= level) \
27         printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
28
29 enum rc_driver_type {
30         RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */
31         RC_DRIVER_IR_RAW,       /* Needs a Infra-Red pulse/space decoder */
32 };
33
34 /**
35  * struct ir_dev_props - Allow caller drivers to set special properties
36  * @driver_type: specifies if the driver or hardware have already a decoder,
37  *      or if it needs to use the IR raw event decoders to produce a scancode
38  * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
39  * @scanmask: some hardware decoders are not capable of providing the full
40  *      scancode to the application. As this is a hardware limit, we can't do
41  *      anything with it. Yet, as the same keycode table can be used with other
42  *      devices, a mask is provided to allow its usage. Drivers should generally
43  *      leave this field in blank
44  * @priv: driver-specific data, to be used on the callbacks
45  * @change_protocol: allow changing the protocol used on hardware decoders
46  * @open: callback to allow drivers to enable polling/irq when IR input device
47  *      is opened.
48  * @close: callback to allow drivers to disable polling/irq when IR input device
49  *      is opened.
50  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
51  * @s_tx_carrier: set transmit carrier frequency
52  * @tx_ir: transmit IR
53  */
54 struct ir_dev_props {
55         enum rc_driver_type     driver_type;
56         unsigned long           allowed_protos;
57         u32                     scanmask;
58         void                    *priv;
59         int                     (*change_protocol)(void *priv, u64 ir_type);
60         int                     (*open)(void *priv);
61         void                    (*close)(void *priv);
62         int                     (*s_tx_mask)(void *priv, u32 mask);
63         int                     (*s_tx_carrier)(void *priv, u32 carrier);
64         int                     (*tx_ir)(void *priv, int *txbuf, u32 n);
65 };
66
67 struct ir_input_dev {
68         struct device                   dev;            /* device */
69         char                            *driver_name;   /* Name of the driver module */
70         struct ir_scancode_table        rc_tab;         /* scan/key table */
71         unsigned long                   devno;          /* device number */
72         const struct ir_dev_props       *props;         /* Device properties */
73         struct ir_raw_event_ctrl        *raw;           /* for raw pulse/space events */
74         struct input_dev                *input_dev;     /* the input device associated with this device */
75
76         /* key info - needed by IR keycode handlers */
77         spinlock_t                      keylock;        /* protects the below members */
78         bool                            keypressed;     /* current state */
79         unsigned long                   keyup_jiffies;  /* when should the current keypress be released? */
80         struct timer_list               timer_keyup;    /* timer for releasing a keypress */
81         u32                             last_keycode;   /* keycode of last command */
82         u32                             last_scancode;  /* scancode of last command */
83         u8                              last_toggle;    /* toggle of last command */
84 };
85
86 enum raw_event_type {
87         IR_SPACE        = (1 << 0),
88         IR_PULSE        = (1 << 1),
89         IR_START_EVENT  = (1 << 2),
90         IR_STOP_EVENT   = (1 << 3),
91 };
92
93 #define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
94
95 /* From ir-keytable.c */
96 int __ir_input_register(struct input_dev *dev,
97                       const struct ir_scancode_table *ir_codes,
98                       const struct ir_dev_props *props,
99                       const char *driver_name);
100
101 static inline int ir_input_register(struct input_dev *dev,
102                       const char *map_name,
103                       const struct ir_dev_props *props,
104                       const char *driver_name) {
105         struct ir_scancode_table *ir_codes;
106         struct ir_input_dev *ir_dev;
107         int rc;
108
109         if (!map_name)
110                 return -EINVAL;
111
112         ir_codes = get_rc_map(map_name);
113         if (!ir_codes)
114                 return -EINVAL;
115
116         rc = __ir_input_register(dev, ir_codes, props, driver_name);
117         if (rc < 0)
118                 return -EINVAL;
119
120         ir_dev = input_get_drvdata(dev);
121
122         if (!rc && ir_dev->props && ir_dev->props->change_protocol)
123                 rc = ir_dev->props->change_protocol(ir_dev->props->priv,
124                                                     ir_codes->ir_type);
125
126         return rc;
127 }
128
129 void ir_input_unregister(struct input_dev *input_dev);
130
131 void ir_repeat(struct input_dev *dev);
132 void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
133 u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
134
135 /* From ir-raw-event.c */
136
137 struct ir_raw_event {
138         unsigned                        pulse:1;
139         unsigned                        duration:31;
140 };
141
142 #define IR_MAX_DURATION                 0x7FFFFFFF      /* a bit more than 2 seconds */
143
144 void ir_raw_event_handle(struct input_dev *input_dev);
145 int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
146 int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
147 static inline void ir_raw_event_reset(struct input_dev *input_dev)
148 {
149         struct ir_raw_event ev = { .pulse = false, .duration = 0 };
150         ir_raw_event_store(input_dev, &ev);
151         ir_raw_event_handle(input_dev);
152 }
153
154 #endif /* _IR_CORE */