]> git.karo-electronics.de Git - karo-tx-linux.git/blob - net/ipv4/arp.c
Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git...
[karo-tx-linux.git] / net / ipv4 / arp.c
1 /* linux/net/ipv4/arp.c
2  *
3  * Copyright (C) 1994 by Florian  La Roche
4  *
5  * This module implements the Address Resolution Protocol ARP (RFC 826),
6  * which is used to convert IP addresses (or in the future maybe other
7  * high-level addresses) into a low-level hardware address (like an Ethernet
8  * address).
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version
13  * 2 of the License, or (at your option) any later version.
14  *
15  * Fixes:
16  *              Alan Cox        :       Removed the Ethernet assumptions in
17  *                                      Florian's code
18  *              Alan Cox        :       Fixed some small errors in the ARP
19  *                                      logic
20  *              Alan Cox        :       Allow >4K in /proc
21  *              Alan Cox        :       Make ARP add its own protocol entry
22  *              Ross Martin     :       Rewrote arp_rcv() and arp_get_info()
23  *              Stephen Henson  :       Add AX25 support to arp_get_info()
24  *              Alan Cox        :       Drop data when a device is downed.
25  *              Alan Cox        :       Use init_timer().
26  *              Alan Cox        :       Double lock fixes.
27  *              Martin Seine    :       Move the arphdr structure
28  *                                      to if_arp.h for compatibility.
29  *                                      with BSD based programs.
30  *              Andrew Tridgell :       Added ARP netmask code and
31  *                                      re-arranged proxy handling.
32  *              Alan Cox        :       Changed to use notifiers.
33  *              Niibe Yutaka    :       Reply for this device or proxies only.
34  *              Alan Cox        :       Don't proxy across hardware types!
35  *              Jonathan Naylor :       Added support for NET/ROM.
36  *              Mike Shaver     :       RFC1122 checks.
37  *              Jonathan Naylor :       Only lookup the hardware address for
38  *                                      the correct hardware type.
39  *              Germano Caronni :       Assorted subtle races.
40  *              Craig Schlenter :       Don't modify permanent entry
41  *                                      during arp_rcv.
42  *              Russ Nelson     :       Tidied up a few bits.
43  *              Alexey Kuznetsov:       Major changes to caching and behaviour,
44  *                                      eg intelligent arp probing and
45  *                                      generation
46  *                                      of host down events.
47  *              Alan Cox        :       Missing unlock in device events.
48  *              Eckes           :       ARP ioctl control errors.
49  *              Alexey Kuznetsov:       Arp free fix.
50  *              Manuel Rodriguez:       Gratuitous ARP.
51  *              Jonathan Layes  :       Added arpd support through kerneld
52  *                                      message queue (960314)
53  *              Mike Shaver     :       /proc/sys/net/ipv4/arp_* support
54  *              Mike McLagan    :       Routing by source
55  *              Stuart Cheshire :       Metricom and grat arp fixes
56  *                                      *** FOR 2.1 clean this up ***
57  *              Lawrence V. Stefani: (08/12/96) Added FDDI support.
58  *              Alan Cox        :       Took the AP1000 nasty FDDI hack and
59  *                                      folded into the mainstream FDDI code.
60  *                                      Ack spit, Linus how did you allow that
61  *                                      one in...
62  *              Jes Sorensen    :       Make FDDI work again in 2.1.x and
63  *                                      clean up the APFDDI & gen. FDDI bits.
64  *              Alexey Kuznetsov:       new arp state machine;
65  *                                      now it is in net/core/neighbour.c.
66  *              Krzysztof Halasa:       Added Frame Relay ARP support.
67  *              Arnaldo C. Melo :       convert /proc/net/arp to seq_file
68  *              Shmulik Hen:            Split arp_send to arp_create and
69  *                                      arp_xmit so intermediate drivers like
70  *                                      bonding can change the skb before
71  *                                      sending (e.g. insert 8021q tag).
72  *              Harald Welte    :       convert to make use of jenkins hash
73  *              Jesper D. Brouer:       Proxy ARP PVLAN RFC 3069 support.
74  */
75
76 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
77
78 #include <linux/module.h>
79 #include <linux/types.h>
80 #include <linux/string.h>
81 #include <linux/kernel.h>
82 #include <linux/capability.h>
83 #include <linux/socket.h>
84 #include <linux/sockios.h>
85 #include <linux/errno.h>
86 #include <linux/in.h>
87 #include <linux/mm.h>
88 #include <linux/inet.h>
89 #include <linux/inetdevice.h>
90 #include <linux/netdevice.h>
91 #include <linux/etherdevice.h>
92 #include <linux/fddidevice.h>
93 #include <linux/if_arp.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/slab.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
105
106 #include <net/net_namespace.h>
107 #include <net/ip.h>
108 #include <net/icmp.h>
109 #include <net/route.h>
110 #include <net/protocol.h>
111 #include <net/tcp.h>
112 #include <net/sock.h>
113 #include <net/arp.h>
114 #include <net/ax25.h>
115 #include <net/netrom.h>
116 #include <net/dst_metadata.h>
117 #include <net/ip_tunnels.h>
118
119 #include <linux/uaccess.h>
120
121 #include <linux/netfilter_arp.h>
122
123 /*
124  *      Interface to generic neighbour cache.
125  */
126 static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd);
127 static bool arp_key_eq(const struct neighbour *n, const void *pkey);
128 static int arp_constructor(struct neighbour *neigh);
129 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
130 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
131 static void parp_redo(struct sk_buff *skb);
132
133 static const struct neigh_ops arp_generic_ops = {
134         .family =               AF_INET,
135         .solicit =              arp_solicit,
136         .error_report =         arp_error_report,
137         .output =               neigh_resolve_output,
138         .connected_output =     neigh_connected_output,
139 };
140
141 static const struct neigh_ops arp_hh_ops = {
142         .family =               AF_INET,
143         .solicit =              arp_solicit,
144         .error_report =         arp_error_report,
145         .output =               neigh_resolve_output,
146         .connected_output =     neigh_resolve_output,
147 };
148
149 static const struct neigh_ops arp_direct_ops = {
150         .family =               AF_INET,
151         .output =               neigh_direct_output,
152         .connected_output =     neigh_direct_output,
153 };
154
155 struct neigh_table arp_tbl = {
156         .family         = AF_INET,
157         .key_len        = 4,
158         .protocol       = cpu_to_be16(ETH_P_IP),
159         .hash           = arp_hash,
160         .key_eq         = arp_key_eq,
161         .constructor    = arp_constructor,
162         .proxy_redo     = parp_redo,
163         .id             = "arp_cache",
164         .parms          = {
165                 .tbl                    = &arp_tbl,
166                 .reachable_time         = 30 * HZ,
167                 .data   = {
168                         [NEIGH_VAR_MCAST_PROBES] = 3,
169                         [NEIGH_VAR_UCAST_PROBES] = 3,
170                         [NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
171                         [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
172                         [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
173                         [NEIGH_VAR_GC_STALETIME] = 60 * HZ,
174                         [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024,
175                         [NEIGH_VAR_PROXY_QLEN] = 64,
176                         [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ,
177                         [NEIGH_VAR_PROXY_DELAY] = (8 * HZ) / 10,
178                         [NEIGH_VAR_LOCKTIME] = 1 * HZ,
179                 },
180         },
181         .gc_interval    = 30 * HZ,
182         .gc_thresh1     = 128,
183         .gc_thresh2     = 512,
184         .gc_thresh3     = 1024,
185 };
186 EXPORT_SYMBOL(arp_tbl);
187
188 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
189 {
190         switch (dev->type) {
191         case ARPHRD_ETHER:
192         case ARPHRD_FDDI:
193         case ARPHRD_IEEE802:
194                 ip_eth_mc_map(addr, haddr);
195                 return 0;
196         case ARPHRD_INFINIBAND:
197                 ip_ib_mc_map(addr, dev->broadcast, haddr);
198                 return 0;
199         case ARPHRD_IPGRE:
200                 ip_ipgre_mc_map(addr, dev->broadcast, haddr);
201                 return 0;
202         default:
203                 if (dir) {
204                         memcpy(haddr, dev->broadcast, dev->addr_len);
205                         return 0;
206                 }
207         }
208         return -EINVAL;
209 }
210
211
212 static u32 arp_hash(const void *pkey,
213                     const struct net_device *dev,
214                     __u32 *hash_rnd)
215 {
216         return arp_hashfn(pkey, dev, hash_rnd);
217 }
218
219 static bool arp_key_eq(const struct neighbour *neigh, const void *pkey)
220 {
221         return neigh_key_eq32(neigh, pkey);
222 }
223
224 static int arp_constructor(struct neighbour *neigh)
225 {
226         __be32 addr = *(__be32 *)neigh->primary_key;
227         struct net_device *dev = neigh->dev;
228         struct in_device *in_dev;
229         struct neigh_parms *parms;
230
231         rcu_read_lock();
232         in_dev = __in_dev_get_rcu(dev);
233         if (!in_dev) {
234                 rcu_read_unlock();
235                 return -EINVAL;
236         }
237
238         neigh->type = inet_addr_type_dev_table(dev_net(dev), dev, addr);
239
240         parms = in_dev->arp_parms;
241         __neigh_parms_put(neigh->parms);
242         neigh->parms = neigh_parms_clone(parms);
243         rcu_read_unlock();
244
245         if (!dev->header_ops) {
246                 neigh->nud_state = NUD_NOARP;
247                 neigh->ops = &arp_direct_ops;
248                 neigh->output = neigh_direct_output;
249         } else {
250                 /* Good devices (checked by reading texts, but only Ethernet is
251                    tested)
252
253                    ARPHRD_ETHER: (ethernet, apfddi)
254                    ARPHRD_FDDI: (fddi)
255                    ARPHRD_IEEE802: (tr)
256                    ARPHRD_METRICOM: (strip)
257                    ARPHRD_ARCNET:
258                    etc. etc. etc.
259
260                    ARPHRD_IPDDP will also work, if author repairs it.
261                    I did not it, because this driver does not work even
262                    in old paradigm.
263                  */
264
265                 if (neigh->type == RTN_MULTICAST) {
266                         neigh->nud_state = NUD_NOARP;
267                         arp_mc_map(addr, neigh->ha, dev, 1);
268                 } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
269                         neigh->nud_state = NUD_NOARP;
270                         memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
271                 } else if (neigh->type == RTN_BROADCAST ||
272                            (dev->flags & IFF_POINTOPOINT)) {
273                         neigh->nud_state = NUD_NOARP;
274                         memcpy(neigh->ha, dev->broadcast, dev->addr_len);
275                 }
276
277                 if (dev->header_ops->cache)
278                         neigh->ops = &arp_hh_ops;
279                 else
280                         neigh->ops = &arp_generic_ops;
281
282                 if (neigh->nud_state & NUD_VALID)
283                         neigh->output = neigh->ops->connected_output;
284                 else
285                         neigh->output = neigh->ops->output;
286         }
287         return 0;
288 }
289
290 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
291 {
292         dst_link_failure(skb);
293         kfree_skb(skb);
294 }
295
296 /* Create and send an arp packet. */
297 static void arp_send_dst(int type, int ptype, __be32 dest_ip,
298                          struct net_device *dev, __be32 src_ip,
299                          const unsigned char *dest_hw,
300                          const unsigned char *src_hw,
301                          const unsigned char *target_hw,
302                          struct dst_entry *dst)
303 {
304         struct sk_buff *skb;
305
306         /* arp on this interface. */
307         if (dev->flags & IFF_NOARP)
308                 return;
309
310         skb = arp_create(type, ptype, dest_ip, dev, src_ip,
311                          dest_hw, src_hw, target_hw);
312         if (!skb)
313                 return;
314
315         skb_dst_set(skb, dst_clone(dst));
316         arp_xmit(skb);
317 }
318
319 void arp_send(int type, int ptype, __be32 dest_ip,
320               struct net_device *dev, __be32 src_ip,
321               const unsigned char *dest_hw, const unsigned char *src_hw,
322               const unsigned char *target_hw)
323 {
324         arp_send_dst(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw,
325                      target_hw, NULL);
326 }
327 EXPORT_SYMBOL(arp_send);
328
329 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
330 {
331         __be32 saddr = 0;
332         u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL;
333         struct net_device *dev = neigh->dev;
334         __be32 target = *(__be32 *)neigh->primary_key;
335         int probes = atomic_read(&neigh->probes);
336         struct in_device *in_dev;
337         struct dst_entry *dst = NULL;
338
339         rcu_read_lock();
340         in_dev = __in_dev_get_rcu(dev);
341         if (!in_dev) {
342                 rcu_read_unlock();
343                 return;
344         }
345         switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
346         default:
347         case 0:         /* By default announce any local IP */
348                 if (skb && inet_addr_type_dev_table(dev_net(dev), dev,
349                                           ip_hdr(skb)->saddr) == RTN_LOCAL)
350                         saddr = ip_hdr(skb)->saddr;
351                 break;
352         case 1:         /* Restrict announcements of saddr in same subnet */
353                 if (!skb)
354                         break;
355                 saddr = ip_hdr(skb)->saddr;
356                 if (inet_addr_type_dev_table(dev_net(dev), dev,
357                                              saddr) == RTN_LOCAL) {
358                         /* saddr should be known to target */
359                         if (inet_addr_onlink(in_dev, target, saddr))
360                                 break;
361                 }
362                 saddr = 0;
363                 break;
364         case 2:         /* Avoid secondary IPs, get a primary/preferred one */
365                 break;
366         }
367         rcu_read_unlock();
368
369         if (!saddr)
370                 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
371
372         probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES);
373         if (probes < 0) {
374                 if (!(neigh->nud_state & NUD_VALID))
375                         pr_debug("trying to ucast probe in NUD_INVALID\n");
376                 neigh_ha_snapshot(dst_ha, neigh, dev);
377                 dst_hw = dst_ha;
378         } else {
379                 probes -= NEIGH_VAR(neigh->parms, APP_PROBES);
380                 if (probes < 0) {
381                         neigh_app_ns(neigh);
382                         return;
383                 }
384         }
385
386         if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE))
387                 dst = skb_dst(skb);
388         arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
389                      dst_hw, dev->dev_addr, NULL, dst);
390 }
391
392 static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
393 {
394         struct net *net = dev_net(in_dev->dev);
395         int scope;
396
397         switch (IN_DEV_ARP_IGNORE(in_dev)) {
398         case 0: /* Reply, the tip is already validated */
399                 return 0;
400         case 1: /* Reply only if tip is configured on the incoming interface */
401                 sip = 0;
402                 scope = RT_SCOPE_HOST;
403                 break;
404         case 2: /*
405                  * Reply only if tip is configured on the incoming interface
406                  * and is in same subnet as sip
407                  */
408                 scope = RT_SCOPE_HOST;
409                 break;
410         case 3: /* Do not reply for scope host addresses */
411                 sip = 0;
412                 scope = RT_SCOPE_LINK;
413                 in_dev = NULL;
414                 break;
415         case 4: /* Reserved */
416         case 5:
417         case 6:
418         case 7:
419                 return 0;
420         case 8: /* Do not reply */
421                 return 1;
422         default:
423                 return 0;
424         }
425         return !inet_confirm_addr(net, in_dev, sip, tip, scope);
426 }
427
428 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
429 {
430         struct rtable *rt;
431         int flag = 0;
432         /*unsigned long now; */
433         struct net *net = dev_net(dev);
434
435         rt = ip_route_output(net, sip, tip, 0, 0);
436         if (IS_ERR(rt))
437                 return 1;
438         if (rt->dst.dev != dev) {
439                 __NET_INC_STATS(net, LINUX_MIB_ARPFILTER);
440                 flag = 1;
441         }
442         ip_rt_put(rt);
443         return flag;
444 }
445
446 /*
447  * Check if we can use proxy ARP for this path
448  */
449 static inline int arp_fwd_proxy(struct in_device *in_dev,
450                                 struct net_device *dev, struct rtable *rt)
451 {
452         struct in_device *out_dev;
453         int imi, omi = -1;
454
455         if (rt->dst.dev == dev)
456                 return 0;
457
458         if (!IN_DEV_PROXY_ARP(in_dev))
459                 return 0;
460         imi = IN_DEV_MEDIUM_ID(in_dev);
461         if (imi == 0)
462                 return 1;
463         if (imi == -1)
464                 return 0;
465
466         /* place to check for proxy_arp for routes */
467
468         out_dev = __in_dev_get_rcu(rt->dst.dev);
469         if (out_dev)
470                 omi = IN_DEV_MEDIUM_ID(out_dev);
471
472         return omi != imi && omi != -1;
473 }
474
475 /*
476  * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev)
477  *
478  * RFC3069 supports proxy arp replies back to the same interface.  This
479  * is done to support (ethernet) switch features, like RFC 3069, where
480  * the individual ports are not allowed to communicate with each
481  * other, BUT they are allowed to talk to the upstream router.  As
482  * described in RFC 3069, it is possible to allow these hosts to
483  * communicate through the upstream router, by proxy_arp'ing.
484  *
485  * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation"
486  *
487  *  This technology is known by different names:
488  *    In RFC 3069 it is called VLAN Aggregation.
489  *    Cisco and Allied Telesyn call it Private VLAN.
490  *    Hewlett-Packard call it Source-Port filtering or port-isolation.
491  *    Ericsson call it MAC-Forced Forwarding (RFC Draft).
492  *
493  */
494 static inline int arp_fwd_pvlan(struct in_device *in_dev,
495                                 struct net_device *dev, struct rtable *rt,
496                                 __be32 sip, __be32 tip)
497 {
498         /* Private VLAN is only concerned about the same ethernet segment */
499         if (rt->dst.dev != dev)
500                 return 0;
501
502         /* Don't reply on self probes (often done by windowz boxes)*/
503         if (sip == tip)
504                 return 0;
505
506         if (IN_DEV_PROXY_ARP_PVLAN(in_dev))
507                 return 1;
508         else
509                 return 0;
510 }
511
512 /*
513  *      Interface to link layer: send routine and receive handler.
514  */
515
516 /*
517  *      Create an arp packet. If dest_hw is not set, we create a broadcast
518  *      message.
519  */
520 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
521                            struct net_device *dev, __be32 src_ip,
522                            const unsigned char *dest_hw,
523                            const unsigned char *src_hw,
524                            const unsigned char *target_hw)
525 {
526         struct sk_buff *skb;
527         struct arphdr *arp;
528         unsigned char *arp_ptr;
529         int hlen = LL_RESERVED_SPACE(dev);
530         int tlen = dev->needed_tailroom;
531
532         /*
533          *      Allocate a buffer
534          */
535
536         skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC);
537         if (!skb)
538                 return NULL;
539
540         skb_reserve(skb, hlen);
541         skb_reset_network_header(skb);
542         arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
543         skb->dev = dev;
544         skb->protocol = htons(ETH_P_ARP);
545         if (!src_hw)
546                 src_hw = dev->dev_addr;
547         if (!dest_hw)
548                 dest_hw = dev->broadcast;
549
550         /*
551          *      Fill the device header for the ARP frame
552          */
553         if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
554                 goto out;
555
556         /*
557          * Fill out the arp protocol part.
558          *
559          * The arp hardware type should match the device type, except for FDDI,
560          * which (according to RFC 1390) should always equal 1 (Ethernet).
561          */
562         /*
563          *      Exceptions everywhere. AX.25 uses the AX.25 PID value not the
564          *      DIX code for the protocol. Make these device structure fields.
565          */
566         switch (dev->type) {
567         default:
568                 arp->ar_hrd = htons(dev->type);
569                 arp->ar_pro = htons(ETH_P_IP);
570                 break;
571
572 #if IS_ENABLED(CONFIG_AX25)
573         case ARPHRD_AX25:
574                 arp->ar_hrd = htons(ARPHRD_AX25);
575                 arp->ar_pro = htons(AX25_P_IP);
576                 break;
577
578 #if IS_ENABLED(CONFIG_NETROM)
579         case ARPHRD_NETROM:
580                 arp->ar_hrd = htons(ARPHRD_NETROM);
581                 arp->ar_pro = htons(AX25_P_IP);
582                 break;
583 #endif
584 #endif
585
586 #if IS_ENABLED(CONFIG_FDDI)
587         case ARPHRD_FDDI:
588                 arp->ar_hrd = htons(ARPHRD_ETHER);
589                 arp->ar_pro = htons(ETH_P_IP);
590                 break;
591 #endif
592         }
593
594         arp->ar_hln = dev->addr_len;
595         arp->ar_pln = 4;
596         arp->ar_op = htons(type);
597
598         arp_ptr = (unsigned char *)(arp + 1);
599
600         memcpy(arp_ptr, src_hw, dev->addr_len);
601         arp_ptr += dev->addr_len;
602         memcpy(arp_ptr, &src_ip, 4);
603         arp_ptr += 4;
604
605         switch (dev->type) {
606 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
607         case ARPHRD_IEEE1394:
608                 break;
609 #endif
610         default:
611                 if (target_hw)
612                         memcpy(arp_ptr, target_hw, dev->addr_len);
613                 else
614                         memset(arp_ptr, 0, dev->addr_len);
615                 arp_ptr += dev->addr_len;
616         }
617         memcpy(arp_ptr, &dest_ip, 4);
618
619         return skb;
620
621 out:
622         kfree_skb(skb);
623         return NULL;
624 }
625 EXPORT_SYMBOL(arp_create);
626
627 static int arp_xmit_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
628 {
629         return dev_queue_xmit(skb);
630 }
631
632 /*
633  *      Send an arp packet.
634  */
635 void arp_xmit(struct sk_buff *skb)
636 {
637         /* Send it off, maybe filter it using firewalling first.  */
638         NF_HOOK(NFPROTO_ARP, NF_ARP_OUT,
639                 dev_net(skb->dev), NULL, skb, NULL, skb->dev,
640                 arp_xmit_finish);
641 }
642 EXPORT_SYMBOL(arp_xmit);
643
644 /*
645  *      Process an arp request.
646  */
647
648 static int arp_process(struct net *net, struct sock *sk, struct sk_buff *skb)
649 {
650         struct net_device *dev = skb->dev;
651         struct in_device *in_dev = __in_dev_get_rcu(dev);
652         struct arphdr *arp;
653         unsigned char *arp_ptr;
654         struct rtable *rt;
655         unsigned char *sha;
656         unsigned char *tha = NULL;
657         __be32 sip, tip;
658         u16 dev_type = dev->type;
659         int addr_type;
660         struct neighbour *n;
661         struct dst_entry *reply_dst = NULL;
662         bool is_garp = false;
663
664         /* arp_rcv below verifies the ARP header and verifies the device
665          * is ARP'able.
666          */
667
668         if (!in_dev)
669                 goto out_free_skb;
670
671         arp = arp_hdr(skb);
672
673         switch (dev_type) {
674         default:
675                 if (arp->ar_pro != htons(ETH_P_IP) ||
676                     htons(dev_type) != arp->ar_hrd)
677                         goto out_free_skb;
678                 break;
679         case ARPHRD_ETHER:
680         case ARPHRD_FDDI:
681         case ARPHRD_IEEE802:
682                 /*
683                  * ETHERNET, and Fibre Channel (which are IEEE 802
684                  * devices, according to RFC 2625) devices will accept ARP
685                  * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
686                  * This is the case also of FDDI, where the RFC 1390 says that
687                  * FDDI devices should accept ARP hardware of (1) Ethernet,
688                  * however, to be more robust, we'll accept both 1 (Ethernet)
689                  * or 6 (IEEE 802.2)
690                  */
691                 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
692                      arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
693                     arp->ar_pro != htons(ETH_P_IP))
694                         goto out_free_skb;
695                 break;
696         case ARPHRD_AX25:
697                 if (arp->ar_pro != htons(AX25_P_IP) ||
698                     arp->ar_hrd != htons(ARPHRD_AX25))
699                         goto out_free_skb;
700                 break;
701         case ARPHRD_NETROM:
702                 if (arp->ar_pro != htons(AX25_P_IP) ||
703                     arp->ar_hrd != htons(ARPHRD_NETROM))
704                         goto out_free_skb;
705                 break;
706         }
707
708         /* Understand only these message types */
709
710         if (arp->ar_op != htons(ARPOP_REPLY) &&
711             arp->ar_op != htons(ARPOP_REQUEST))
712                 goto out_free_skb;
713
714 /*
715  *      Extract fields
716  */
717         arp_ptr = (unsigned char *)(arp + 1);
718         sha     = arp_ptr;
719         arp_ptr += dev->addr_len;
720         memcpy(&sip, arp_ptr, 4);
721         arp_ptr += 4;
722         switch (dev_type) {
723 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
724         case ARPHRD_IEEE1394:
725                 break;
726 #endif
727         default:
728                 tha = arp_ptr;
729                 arp_ptr += dev->addr_len;
730         }
731         memcpy(&tip, arp_ptr, 4);
732 /*
733  *      Check for bad requests for 127.x.x.x and requests for multicast
734  *      addresses.  If this is one such, delete it.
735  */
736         if (ipv4_is_multicast(tip) ||
737             (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip)))
738                 goto out_free_skb;
739
740  /*
741   *     For some 802.11 wireless deployments (and possibly other networks),
742   *     there will be an ARP proxy and gratuitous ARP frames are attacks
743   *     and thus should not be accepted.
744   */
745         if (sip == tip && IN_DEV_ORCONF(in_dev, DROP_GRATUITOUS_ARP))
746                 goto out_free_skb;
747
748 /*
749  *     Special case: We must set Frame Relay source Q.922 address
750  */
751         if (dev_type == ARPHRD_DLCI)
752                 sha = dev->broadcast;
753
754 /*
755  *  Process entry.  The idea here is we want to send a reply if it is a
756  *  request for us or if it is a request for someone else that we hold
757  *  a proxy for.  We want to add an entry to our cache if it is a reply
758  *  to us or if it is a request for our address.
759  *  (The assumption for this last is that if someone is requesting our
760  *  address, they are probably intending to talk to us, so it saves time
761  *  if we cache their address.  Their address is also probably not in
762  *  our cache, since ours is not in their cache.)
763  *
764  *  Putting this another way, we only care about replies if they are to
765  *  us, in which case we add them to the cache.  For requests, we care
766  *  about those for us and those for our proxies.  We reply to both,
767  *  and in the case of requests for us we add the requester to the arp
768  *  cache.
769  */
770
771         if (arp->ar_op == htons(ARPOP_REQUEST) && skb_metadata_dst(skb))
772                 reply_dst = (struct dst_entry *)
773                             iptunnel_metadata_reply(skb_metadata_dst(skb),
774                                                     GFP_ATOMIC);
775
776         /* Special case: IPv4 duplicate address detection packet (RFC2131) */
777         if (sip == 0) {
778                 if (arp->ar_op == htons(ARPOP_REQUEST) &&
779                     inet_addr_type_dev_table(net, dev, tip) == RTN_LOCAL &&
780                     !arp_ignore(in_dev, sip, tip))
781                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip,
782                                      sha, dev->dev_addr, sha, reply_dst);
783                 goto out_consume_skb;
784         }
785
786         if (arp->ar_op == htons(ARPOP_REQUEST) &&
787             ip_route_input_noref(skb, tip, sip, 0, dev) == 0) {
788
789                 rt = skb_rtable(skb);
790                 addr_type = rt->rt_type;
791
792                 if (addr_type == RTN_LOCAL) {
793                         int dont_send;
794
795                         dont_send = arp_ignore(in_dev, sip, tip);
796                         if (!dont_send && IN_DEV_ARPFILTER(in_dev))
797                                 dont_send = arp_filter(sip, tip, dev);
798                         if (!dont_send) {
799                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
800                                 if (n) {
801                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
802                                                      sip, dev, tip, sha,
803                                                      dev->dev_addr, sha,
804                                                      reply_dst);
805                                         neigh_release(n);
806                                 }
807                         }
808                         goto out_consume_skb;
809                 } else if (IN_DEV_FORWARD(in_dev)) {
810                         if (addr_type == RTN_UNICAST  &&
811                             (arp_fwd_proxy(in_dev, dev, rt) ||
812                              arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
813                              (rt->dst.dev != dev &&
814                               pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
815                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
816                                 if (n)
817                                         neigh_release(n);
818
819                                 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
820                                     skb->pkt_type == PACKET_HOST ||
821                                     NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) {
822                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
823                                                      sip, dev, tip, sha,
824                                                      dev->dev_addr, sha,
825                                                      reply_dst);
826                                 } else {
827                                         pneigh_enqueue(&arp_tbl,
828                                                        in_dev->arp_parms, skb);
829                                         goto out_free_dst;
830                                 }
831                                 goto out_consume_skb;
832                         }
833                 }
834         }
835
836         /* Update our ARP tables */
837
838         n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
839
840         if (IN_DEV_ARP_ACCEPT(in_dev)) {
841                 unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
842
843                 /* Unsolicited ARP is not accepted by default.
844                    It is possible, that this option should be enabled for some
845                    devices (strip is candidate)
846                  */
847                 is_garp = tip == sip && addr_type == RTN_UNICAST;
848
849                 /* Unsolicited ARP _replies_ also require target hwaddr to be
850                  * the same as source.
851                  */
852                 if (is_garp && arp->ar_op == htons(ARPOP_REPLY))
853                         is_garp =
854                                 /* IPv4 over IEEE 1394 doesn't provide target
855                                  * hardware address field in its ARP payload.
856                                  */
857                                 tha &&
858                                 !memcmp(tha, sha, dev->addr_len);
859
860                 if (!n &&
861                     ((arp->ar_op == htons(ARPOP_REPLY)  &&
862                                 addr_type == RTN_UNICAST) || is_garp))
863                         n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
864         }
865
866         if (n) {
867                 int state = NUD_REACHABLE;
868                 int override;
869
870                 /* If several different ARP replies follows back-to-back,
871                    use the FIRST one. It is possible, if several proxy
872                    agents are active. Taking the first reply prevents
873                    arp trashing and chooses the fastest router.
874                  */
875                 override = time_after(jiffies,
876                                       n->updated +
877                                       NEIGH_VAR(n->parms, LOCKTIME)) ||
878                            is_garp;
879
880                 /* Broadcast replies and request packets
881                    do not assert neighbour reachability.
882                  */
883                 if (arp->ar_op != htons(ARPOP_REPLY) ||
884                     skb->pkt_type != PACKET_HOST)
885                         state = NUD_STALE;
886                 neigh_update(n, sha, state,
887                              override ? NEIGH_UPDATE_F_OVERRIDE : 0, 0);
888                 neigh_release(n);
889         }
890
891 out_consume_skb:
892         consume_skb(skb);
893
894 out_free_dst:
895         dst_release(reply_dst);
896         return NET_RX_SUCCESS;
897
898 out_free_skb:
899         kfree_skb(skb);
900         return NET_RX_DROP;
901 }
902
903 static void parp_redo(struct sk_buff *skb)
904 {
905         arp_process(dev_net(skb->dev), NULL, skb);
906 }
907
908
909 /*
910  *      Receive an arp request from the device layer.
911  */
912
913 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
914                    struct packet_type *pt, struct net_device *orig_dev)
915 {
916         const struct arphdr *arp;
917
918         /* do not tweak dropwatch on an ARP we will ignore */
919         if (dev->flags & IFF_NOARP ||
920             skb->pkt_type == PACKET_OTHERHOST ||
921             skb->pkt_type == PACKET_LOOPBACK)
922                 goto consumeskb;
923
924         skb = skb_share_check(skb, GFP_ATOMIC);
925         if (!skb)
926                 goto out_of_mem;
927
928         /* ARP header, plus 2 device addresses, plus 2 IP addresses.  */
929         if (!pskb_may_pull(skb, arp_hdr_len(dev)))
930                 goto freeskb;
931
932         arp = arp_hdr(skb);
933         if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4)
934                 goto freeskb;
935
936         memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
937
938         return NF_HOOK(NFPROTO_ARP, NF_ARP_IN,
939                        dev_net(dev), NULL, skb, dev, NULL,
940                        arp_process);
941
942 consumeskb:
943         consume_skb(skb);
944         return NET_RX_SUCCESS;
945 freeskb:
946         kfree_skb(skb);
947 out_of_mem:
948         return NET_RX_DROP;
949 }
950
951 /*
952  *      User level interface (ioctl)
953  */
954
955 /*
956  *      Set (create) an ARP cache entry.
957  */
958
959 static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
960 {
961         if (!dev) {
962                 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
963                 return 0;
964         }
965         if (__in_dev_get_rtnl(dev)) {
966                 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
967                 return 0;
968         }
969         return -ENXIO;
970 }
971
972 static int arp_req_set_public(struct net *net, struct arpreq *r,
973                 struct net_device *dev)
974 {
975         __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
976         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
977
978         if (mask && mask != htonl(0xFFFFFFFF))
979                 return -EINVAL;
980         if (!dev && (r->arp_flags & ATF_COM)) {
981                 dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
982                                       r->arp_ha.sa_data);
983                 if (!dev)
984                         return -ENODEV;
985         }
986         if (mask) {
987                 if (!pneigh_lookup(&arp_tbl, net, &ip, dev, 1))
988                         return -ENOBUFS;
989                 return 0;
990         }
991
992         return arp_req_set_proxy(net, dev, 1);
993 }
994
995 static int arp_req_set(struct net *net, struct arpreq *r,
996                        struct net_device *dev)
997 {
998         __be32 ip;
999         struct neighbour *neigh;
1000         int err;
1001
1002         if (r->arp_flags & ATF_PUBL)
1003                 return arp_req_set_public(net, r, dev);
1004
1005         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1006         if (r->arp_flags & ATF_PERM)
1007                 r->arp_flags |= ATF_COM;
1008         if (!dev) {
1009                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1010
1011                 if (IS_ERR(rt))
1012                         return PTR_ERR(rt);
1013                 dev = rt->dst.dev;
1014                 ip_rt_put(rt);
1015                 if (!dev)
1016                         return -EINVAL;
1017         }
1018         switch (dev->type) {
1019 #if IS_ENABLED(CONFIG_FDDI)
1020         case ARPHRD_FDDI:
1021                 /*
1022                  * According to RFC 1390, FDDI devices should accept ARP
1023                  * hardware types of 1 (Ethernet).  However, to be more
1024                  * robust, we'll accept hardware types of either 1 (Ethernet)
1025                  * or 6 (IEEE 802.2).
1026                  */
1027                 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1028                     r->arp_ha.sa_family != ARPHRD_ETHER &&
1029                     r->arp_ha.sa_family != ARPHRD_IEEE802)
1030                         return -EINVAL;
1031                 break;
1032 #endif
1033         default:
1034                 if (r->arp_ha.sa_family != dev->type)
1035                         return -EINVAL;
1036                 break;
1037         }
1038
1039         neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1040         err = PTR_ERR(neigh);
1041         if (!IS_ERR(neigh)) {
1042                 unsigned int state = NUD_STALE;
1043                 if (r->arp_flags & ATF_PERM)
1044                         state = NUD_PERMANENT;
1045                 err = neigh_update(neigh, (r->arp_flags & ATF_COM) ?
1046                                    r->arp_ha.sa_data : NULL, state,
1047                                    NEIGH_UPDATE_F_OVERRIDE |
1048                                    NEIGH_UPDATE_F_ADMIN, 0);
1049                 neigh_release(neigh);
1050         }
1051         return err;
1052 }
1053
1054 static unsigned int arp_state_to_flags(struct neighbour *neigh)
1055 {
1056         if (neigh->nud_state&NUD_PERMANENT)
1057                 return ATF_PERM | ATF_COM;
1058         else if (neigh->nud_state&NUD_VALID)
1059                 return ATF_COM;
1060         else
1061                 return 0;
1062 }
1063
1064 /*
1065  *      Get an ARP cache entry.
1066  */
1067
1068 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1069 {
1070         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1071         struct neighbour *neigh;
1072         int err = -ENXIO;
1073
1074         neigh = neigh_lookup(&arp_tbl, &ip, dev);
1075         if (neigh) {
1076                 if (!(neigh->nud_state & NUD_NOARP)) {
1077                         read_lock_bh(&neigh->lock);
1078                         memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1079                         r->arp_flags = arp_state_to_flags(neigh);
1080                         read_unlock_bh(&neigh->lock);
1081                         r->arp_ha.sa_family = dev->type;
1082                         strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1083                         err = 0;
1084                 }
1085                 neigh_release(neigh);
1086         }
1087         return err;
1088 }
1089
1090 static int arp_invalidate(struct net_device *dev, __be32 ip)
1091 {
1092         struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
1093         int err = -ENXIO;
1094
1095         if (neigh) {
1096                 if (neigh->nud_state & ~NUD_NOARP)
1097                         err = neigh_update(neigh, NULL, NUD_FAILED,
1098                                            NEIGH_UPDATE_F_OVERRIDE|
1099                                            NEIGH_UPDATE_F_ADMIN, 0);
1100                 neigh_release(neigh);
1101         }
1102
1103         return err;
1104 }
1105
1106 static int arp_req_delete_public(struct net *net, struct arpreq *r,
1107                 struct net_device *dev)
1108 {
1109         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1110         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1111
1112         if (mask == htonl(0xFFFFFFFF))
1113                 return pneigh_delete(&arp_tbl, net, &ip, dev);
1114
1115         if (mask)
1116                 return -EINVAL;
1117
1118         return arp_req_set_proxy(net, dev, 0);
1119 }
1120
1121 static int arp_req_delete(struct net *net, struct arpreq *r,
1122                           struct net_device *dev)
1123 {
1124         __be32 ip;
1125
1126         if (r->arp_flags & ATF_PUBL)
1127                 return arp_req_delete_public(net, r, dev);
1128
1129         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1130         if (!dev) {
1131                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1132                 if (IS_ERR(rt))
1133                         return PTR_ERR(rt);
1134                 dev = rt->dst.dev;
1135                 ip_rt_put(rt);
1136                 if (!dev)
1137                         return -EINVAL;
1138         }
1139         return arp_invalidate(dev, ip);
1140 }
1141
1142 /*
1143  *      Handle an ARP layer I/O control request.
1144  */
1145
1146 int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1147 {
1148         int err;
1149         struct arpreq r;
1150         struct net_device *dev = NULL;
1151
1152         switch (cmd) {
1153         case SIOCDARP:
1154         case SIOCSARP:
1155                 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
1156                         return -EPERM;
1157         case SIOCGARP:
1158                 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1159                 if (err)
1160                         return -EFAULT;
1161                 break;
1162         default:
1163                 return -EINVAL;
1164         }
1165
1166         if (r.arp_pa.sa_family != AF_INET)
1167                 return -EPFNOSUPPORT;
1168
1169         if (!(r.arp_flags & ATF_PUBL) &&
1170             (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB)))
1171                 return -EINVAL;
1172         if (!(r.arp_flags & ATF_NETMASK))
1173                 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1174                                                            htonl(0xFFFFFFFFUL);
1175         rtnl_lock();
1176         if (r.arp_dev[0]) {
1177                 err = -ENODEV;
1178                 dev = __dev_get_by_name(net, r.arp_dev);
1179                 if (!dev)
1180                         goto out;
1181
1182                 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1183                 if (!r.arp_ha.sa_family)
1184                         r.arp_ha.sa_family = dev->type;
1185                 err = -EINVAL;
1186                 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1187                         goto out;
1188         } else if (cmd == SIOCGARP) {
1189                 err = -ENODEV;
1190                 goto out;
1191         }
1192
1193         switch (cmd) {
1194         case SIOCDARP:
1195                 err = arp_req_delete(net, &r, dev);
1196                 break;
1197         case SIOCSARP:
1198                 err = arp_req_set(net, &r, dev);
1199                 break;
1200         case SIOCGARP:
1201                 err = arp_req_get(&r, dev);
1202                 break;
1203         }
1204 out:
1205         rtnl_unlock();
1206         if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
1207                 err = -EFAULT;
1208         return err;
1209 }
1210
1211 static int arp_netdev_event(struct notifier_block *this, unsigned long event,
1212                             void *ptr)
1213 {
1214         struct net_device *dev = netdev_notifier_info_to_dev(ptr);
1215         struct netdev_notifier_change_info *change_info;
1216
1217         switch (event) {
1218         case NETDEV_CHANGEADDR:
1219                 neigh_changeaddr(&arp_tbl, dev);
1220                 rt_cache_flush(dev_net(dev));
1221                 break;
1222         case NETDEV_CHANGE:
1223                 change_info = ptr;
1224                 if (change_info->flags_changed & IFF_NOARP)
1225                         neigh_changeaddr(&arp_tbl, dev);
1226                 break;
1227         default:
1228                 break;
1229         }
1230
1231         return NOTIFY_DONE;
1232 }
1233
1234 static struct notifier_block arp_netdev_notifier = {
1235         .notifier_call = arp_netdev_event,
1236 };
1237
1238 /* Note, that it is not on notifier chain.
1239    It is necessary, that this routine was called after route cache will be
1240    flushed.
1241  */
1242 void arp_ifdown(struct net_device *dev)
1243 {
1244         neigh_ifdown(&arp_tbl, dev);
1245 }
1246
1247
1248 /*
1249  *      Called once on startup.
1250  */
1251
1252 static struct packet_type arp_packet_type __read_mostly = {
1253         .type = cpu_to_be16(ETH_P_ARP),
1254         .func = arp_rcv,
1255 };
1256
1257 static int arp_proc_init(void);
1258
1259 void __init arp_init(void)
1260 {
1261         neigh_table_init(NEIGH_ARP_TABLE, &arp_tbl);
1262
1263         dev_add_pack(&arp_packet_type);
1264         arp_proc_init();
1265 #ifdef CONFIG_SYSCTL
1266         neigh_sysctl_register(NULL, &arp_tbl.parms, NULL);
1267 #endif
1268         register_netdevice_notifier(&arp_netdev_notifier);
1269 }
1270
1271 #ifdef CONFIG_PROC_FS
1272 #if IS_ENABLED(CONFIG_AX25)
1273
1274 /* ------------------------------------------------------------------------ */
1275 /*
1276  *      ax25 -> ASCII conversion
1277  */
1278 static void ax2asc2(ax25_address *a, char *buf)
1279 {
1280         char c, *s;
1281         int n;
1282
1283         for (n = 0, s = buf; n < 6; n++) {
1284                 c = (a->ax25_call[n] >> 1) & 0x7F;
1285
1286                 if (c != ' ')
1287                         *s++ = c;
1288         }
1289
1290         *s++ = '-';
1291         n = (a->ax25_call[6] >> 1) & 0x0F;
1292         if (n > 9) {
1293                 *s++ = '1';
1294                 n -= 10;
1295         }
1296
1297         *s++ = n + '0';
1298         *s++ = '\0';
1299
1300         if (*buf == '\0' || *buf == '-') {
1301                 buf[0] = '*';
1302                 buf[1] = '\0';
1303         }
1304 }
1305 #endif /* CONFIG_AX25 */
1306
1307 #define HBUFFERLEN 30
1308
1309 static void arp_format_neigh_entry(struct seq_file *seq,
1310                                    struct neighbour *n)
1311 {
1312         char hbuffer[HBUFFERLEN];
1313         int k, j;
1314         char tbuf[16];
1315         struct net_device *dev = n->dev;
1316         int hatype = dev->type;
1317
1318         read_lock(&n->lock);
1319         /* Convert hardware address to XX:XX:XX:XX ... form. */
1320 #if IS_ENABLED(CONFIG_AX25)
1321         if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1322                 ax2asc2((ax25_address *)n->ha, hbuffer);
1323         else {
1324 #endif
1325         for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1326                 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1327                 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1328                 hbuffer[k++] = ':';
1329         }
1330         if (k != 0)
1331                 --k;
1332         hbuffer[k] = 0;
1333 #if IS_ENABLED(CONFIG_AX25)
1334         }
1335 #endif
1336         sprintf(tbuf, "%pI4", n->primary_key);
1337         seq_printf(seq, "%-16s 0x%-10x0x%-10x%-17s     *        %s\n",
1338                    tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1339         read_unlock(&n->lock);
1340 }
1341
1342 static void arp_format_pneigh_entry(struct seq_file *seq,
1343                                     struct pneigh_entry *n)
1344 {
1345         struct net_device *dev = n->dev;
1346         int hatype = dev ? dev->type : 0;
1347         char tbuf[16];
1348
1349         sprintf(tbuf, "%pI4", n->key);
1350         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1351                    tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1352                    dev ? dev->name : "*");
1353 }
1354
1355 static int arp_seq_show(struct seq_file *seq, void *v)
1356 {
1357         if (v == SEQ_START_TOKEN) {
1358                 seq_puts(seq, "IP address       HW type     Flags       "
1359                               "HW address            Mask     Device\n");
1360         } else {
1361                 struct neigh_seq_state *state = seq->private;
1362
1363                 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1364                         arp_format_pneigh_entry(seq, v);
1365                 else
1366                         arp_format_neigh_entry(seq, v);
1367         }
1368
1369         return 0;
1370 }
1371
1372 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1373 {
1374         /* Don't want to confuse "arp -a" w/ magic entries,
1375          * so we tell the generic iterator to skip NUD_NOARP.
1376          */
1377         return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1378 }
1379
1380 /* ------------------------------------------------------------------------ */
1381
1382 static const struct seq_operations arp_seq_ops = {
1383         .start  = arp_seq_start,
1384         .next   = neigh_seq_next,
1385         .stop   = neigh_seq_stop,
1386         .show   = arp_seq_show,
1387 };
1388
1389 static int arp_seq_open(struct inode *inode, struct file *file)
1390 {
1391         return seq_open_net(inode, file, &arp_seq_ops,
1392                             sizeof(struct neigh_seq_state));
1393 }
1394
1395 static const struct file_operations arp_seq_fops = {
1396         .owner          = THIS_MODULE,
1397         .open           = arp_seq_open,
1398         .read           = seq_read,
1399         .llseek         = seq_lseek,
1400         .release        = seq_release_net,
1401 };
1402
1403
1404 static int __net_init arp_net_init(struct net *net)
1405 {
1406         if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops))
1407                 return -ENOMEM;
1408         return 0;
1409 }
1410
1411 static void __net_exit arp_net_exit(struct net *net)
1412 {
1413         remove_proc_entry("arp", net->proc_net);
1414 }
1415
1416 static struct pernet_operations arp_net_ops = {
1417         .init = arp_net_init,
1418         .exit = arp_net_exit,
1419 };
1420
1421 static int __init arp_proc_init(void)
1422 {
1423         return register_pernet_subsys(&arp_net_ops);
1424 }
1425
1426 #else /* CONFIG_PROC_FS */
1427
1428 static int __init arp_proc_init(void)
1429 {
1430         return 0;
1431 }
1432
1433 #endif /* CONFIG_PROC_FS */