2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright (C) 2015 Intel Deutschland GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/delay.h>
17 #include <linux/if_ether.h>
18 #include <linux/skbuff.h>
19 #include <linux/if_arp.h>
20 #include <linux/etherdevice.h>
21 #include <linux/moduleparam.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_MAX_TRIES 3
38 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
39 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
40 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
41 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
42 #define IEEE80211_ASSOC_MAX_TRIES 3
44 static int max_nullfunc_tries = 2;
45 module_param(max_nullfunc_tries, int, 0644);
46 MODULE_PARM_DESC(max_nullfunc_tries,
47 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 static int max_probe_tries = 5;
50 module_param(max_probe_tries, int, 0644);
51 MODULE_PARM_DESC(max_probe_tries,
52 "Maximum probe tries before disconnecting (reason 4).");
55 * Beacon loss timeout is calculated as N frames times the
56 * advertised beacon interval. This may need to be somewhat
57 * higher than what hardware might detect to account for
58 * delays in the host processing frames. But since we also
59 * probe on beacon miss before declaring the connection lost
60 * default to what we want.
62 static int beacon_loss_count = 7;
63 module_param(beacon_loss_count, int, 0644);
64 MODULE_PARM_DESC(beacon_loss_count,
65 "Number of beacon intervals before we decide beacon was lost.");
68 * Time the connection can be idle before we probe
69 * it to see if we can still talk to the AP.
71 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
73 * Time we wait for a probe response after sending
74 * a probe request because of beacon loss or for
75 * checking the connection still works.
77 static int probe_wait_ms = 500;
78 module_param(probe_wait_ms, int, 0644);
79 MODULE_PARM_DESC(probe_wait_ms,
80 "Maximum time(ms) to wait for probe response"
81 " before disconnecting (reason 4).");
84 * How many Beacon frames need to have been used in average signal strength
85 * before starting to indicate signal change events.
87 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
90 * We can have multiple work items (and connection probing)
91 * scheduling this timer, but we need to take care to only
92 * reschedule it when it should fire _earlier_ than it was
93 * asked for before, or if it's not pending right now. This
94 * function ensures that. Note that it then is required to
95 * run this function for all timeouts after the first one
96 * has happened -- the work that runs from this timer will
99 static void run_again(struct ieee80211_sub_if_data *sdata,
100 unsigned long timeout)
102 sdata_assert_lock(sdata);
104 if (!timer_pending(&sdata->u.mgd.timer) ||
105 time_before(timeout, sdata->u.mgd.timer.expires))
106 mod_timer(&sdata->u.mgd.timer, timeout);
109 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
111 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
114 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
117 mod_timer(&sdata->u.mgd.bcn_mon_timer,
118 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
121 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
123 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
125 if (unlikely(!sdata->u.mgd.associated))
128 ifmgd->probe_send_count = 0;
130 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
133 mod_timer(&sdata->u.mgd.conn_mon_timer,
134 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
137 static int ecw2cw(int ecw)
139 return (1 << ecw) - 1;
143 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
144 struct ieee80211_supported_band *sband,
145 struct ieee80211_channel *channel,
146 const struct ieee80211_ht_cap *ht_cap,
147 const struct ieee80211_ht_operation *ht_oper,
148 const struct ieee80211_vht_operation *vht_oper,
149 struct cfg80211_chan_def *chandef, bool tracking)
151 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
152 struct cfg80211_chan_def vht_chandef;
153 struct ieee80211_sta_ht_cap sta_ht_cap;
156 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
157 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
159 chandef->chan = channel;
160 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
161 chandef->center_freq1 = channel->center_freq;
162 chandef->center_freq2 = 0;
164 if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) {
165 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
169 chandef->width = NL80211_CHAN_WIDTH_20;
171 if (!(ht_cap->cap_info &
172 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
173 ret = IEEE80211_STA_DISABLE_40MHZ;
174 vht_chandef = *chandef;
178 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
180 /* check that channel matches the right operating channel */
181 if (!tracking && channel->center_freq != ht_cfreq) {
183 * It's possible that some APs are confused here;
184 * Netgear WNDR3700 sometimes reports 4 higher than
185 * the actual channel in association responses, but
186 * since we look at probe response/beacon data here
190 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
191 channel->center_freq, ht_cfreq,
192 ht_oper->primary_chan, channel->band);
193 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
197 /* check 40 MHz support, if we have it */
198 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
199 ieee80211_chandef_ht_oper(ht_oper, chandef);
201 /* 40 MHz (and 80 MHz) must be supported for VHT */
202 ret = IEEE80211_STA_DISABLE_VHT;
203 /* also mark 40 MHz disabled */
204 ret |= IEEE80211_STA_DISABLE_40MHZ;
208 if (!vht_oper || !sband->vht_cap.vht_supported) {
209 ret = IEEE80211_STA_DISABLE_VHT;
213 vht_chandef = *chandef;
214 if (!ieee80211_chandef_vht_oper(vht_oper, &vht_chandef)) {
215 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
217 "AP VHT information is invalid, disable VHT\n");
218 ret = IEEE80211_STA_DISABLE_VHT;
222 if (!cfg80211_chandef_valid(&vht_chandef)) {
223 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
225 "AP VHT information is invalid, disable VHT\n");
226 ret = IEEE80211_STA_DISABLE_VHT;
230 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
235 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
236 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
238 "AP VHT information doesn't match HT, disable VHT\n");
239 ret = IEEE80211_STA_DISABLE_VHT;
243 *chandef = vht_chandef;
249 * When tracking the current AP, don't do any further checks if the
250 * new chandef is identical to the one we're currently using for the
251 * connection. This keeps us from playing ping-pong with regulatory,
252 * without it the following can happen (for example):
253 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
254 * - AP advertises regdom US
255 * - CRDA loads regdom US with 80 MHz prohibited (old database)
256 * - the code below detects an unsupported channel, downgrades, and
257 * we disconnect from the AP in the caller
258 * - disconnect causes CRDA to reload world regdomain and the game
260 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
262 * It seems possible that there are still scenarios with CSA or real
263 * bandwidth changes where a this could happen, but those cases are
264 * less common and wouldn't completely prevent using the AP.
267 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
270 /* don't print the message below for VHT mismatch if VHT is disabled */
271 if (ret & IEEE80211_STA_DISABLE_VHT)
272 vht_chandef = *chandef;
275 * Ignore the DISABLED flag when we're already connected and only
276 * tracking the APs beacon for bandwidth changes - otherwise we
277 * might get disconnected here if we connect to an AP, update our
278 * regulatory information based on the AP's country IE and the
279 * information we have is wrong/outdated and disables the channel
280 * that we're actually using for the connection to the AP.
282 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
284 IEEE80211_CHAN_DISABLED)) {
285 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
286 ret = IEEE80211_STA_DISABLE_HT |
287 IEEE80211_STA_DISABLE_VHT;
291 ret |= ieee80211_chandef_downgrade(chandef);
294 if (chandef->width != vht_chandef.width && !tracking)
296 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
298 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
302 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
303 struct sta_info *sta,
304 const struct ieee80211_ht_cap *ht_cap,
305 const struct ieee80211_ht_operation *ht_oper,
306 const struct ieee80211_vht_operation *vht_oper,
307 const u8 *bssid, u32 *changed)
309 struct ieee80211_local *local = sdata->local;
310 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
311 struct ieee80211_supported_band *sband;
312 struct ieee80211_channel *chan;
313 struct cfg80211_chan_def chandef;
316 enum ieee80211_sta_rx_bandwidth new_sta_bw;
319 /* if HT was/is disabled, don't track any bandwidth changes */
320 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
323 /* don't check VHT if we associated as non-VHT station */
324 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
327 if (WARN_ON_ONCE(!sta))
331 * if bss configuration changed store the new one -
332 * this may be applicable even if channel is identical
334 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
335 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
336 *changed |= BSS_CHANGED_HT;
337 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
340 chan = sdata->vif.bss_conf.chandef.chan;
341 sband = local->hw.wiphy->bands[chan->band];
343 /* calculate new channel (type) based on HT/VHT operation IEs */
344 flags = ieee80211_determine_chantype(sdata, sband, chan,
345 ht_cap, ht_oper, vht_oper,
349 * Downgrade the new channel if we associated with restricted
350 * capabilities. For example, if we associated as a 20 MHz STA
351 * to a 40 MHz AP (due to regulatory, capabilities or config
352 * reasons) then switching to a 40 MHz channel now won't do us
353 * any good -- we couldn't use it with the AP.
355 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
356 chandef.width == NL80211_CHAN_WIDTH_80P80)
357 flags |= ieee80211_chandef_downgrade(&chandef);
358 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
359 chandef.width == NL80211_CHAN_WIDTH_160)
360 flags |= ieee80211_chandef_downgrade(&chandef);
361 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
362 chandef.width > NL80211_CHAN_WIDTH_20)
363 flags |= ieee80211_chandef_downgrade(&chandef);
365 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
369 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
370 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
371 chandef.center_freq1, chandef.center_freq2);
373 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
374 IEEE80211_STA_DISABLE_VHT |
375 IEEE80211_STA_DISABLE_40MHZ |
376 IEEE80211_STA_DISABLE_80P80MHZ |
377 IEEE80211_STA_DISABLE_160MHZ)) ||
378 !cfg80211_chandef_valid(&chandef)) {
380 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
385 switch (chandef.width) {
386 case NL80211_CHAN_WIDTH_20_NOHT:
387 case NL80211_CHAN_WIDTH_20:
388 new_sta_bw = IEEE80211_STA_RX_BW_20;
390 case NL80211_CHAN_WIDTH_40:
391 new_sta_bw = IEEE80211_STA_RX_BW_40;
393 case NL80211_CHAN_WIDTH_80:
394 new_sta_bw = IEEE80211_STA_RX_BW_80;
396 case NL80211_CHAN_WIDTH_80P80:
397 case NL80211_CHAN_WIDTH_160:
398 new_sta_bw = IEEE80211_STA_RX_BW_160;
404 if (new_sta_bw > sta->cur_max_bandwidth)
405 new_sta_bw = sta->cur_max_bandwidth;
407 if (new_sta_bw < sta->sta.bandwidth) {
408 sta->sta.bandwidth = new_sta_bw;
409 rate_control_rate_update(local, sband, sta,
410 IEEE80211_RC_BW_CHANGED);
413 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
416 "AP %pM changed bandwidth to incompatible one - disconnect\n",
421 if (new_sta_bw > sta->sta.bandwidth) {
422 sta->sta.bandwidth = new_sta_bw;
423 rate_control_rate_update(local, sband, sta,
424 IEEE80211_RC_BW_CHANGED);
430 /* frame sending functions */
432 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
433 struct sk_buff *skb, u8 ap_ht_param,
434 struct ieee80211_supported_band *sband,
435 struct ieee80211_channel *channel,
436 enum ieee80211_smps_mode smps)
439 u32 flags = channel->flags;
441 struct ieee80211_sta_ht_cap ht_cap;
443 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
445 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
446 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
448 /* determine capability flags */
451 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
452 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
453 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
454 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
455 cap &= ~IEEE80211_HT_CAP_SGI_40;
458 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
459 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
460 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
461 cap &= ~IEEE80211_HT_CAP_SGI_40;
467 * If 40 MHz was disabled associate as though we weren't
468 * capable of 40 MHz -- some broken APs will never fall
469 * back to trying to transmit in 20 MHz.
471 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
472 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
473 cap &= ~IEEE80211_HT_CAP_SGI_40;
476 /* set SM PS mode properly */
477 cap &= ~IEEE80211_HT_CAP_SM_PS;
479 case IEEE80211_SMPS_AUTOMATIC:
480 case IEEE80211_SMPS_NUM_MODES:
482 case IEEE80211_SMPS_OFF:
483 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
484 IEEE80211_HT_CAP_SM_PS_SHIFT;
486 case IEEE80211_SMPS_STATIC:
487 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
488 IEEE80211_HT_CAP_SM_PS_SHIFT;
490 case IEEE80211_SMPS_DYNAMIC:
491 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
492 IEEE80211_HT_CAP_SM_PS_SHIFT;
496 /* reserve and fill IE */
497 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
498 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
501 /* This function determines vht capability flags for the association
503 * Note - the function may set the owner of the MU-MIMO capability
505 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
507 struct ieee80211_supported_band *sband,
508 struct ieee80211_vht_cap *ap_vht_cap)
510 struct ieee80211_local *local = sdata->local;
513 struct ieee80211_sta_vht_cap vht_cap;
514 u32 mask, ap_bf_sts, our_bf_sts;
516 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
518 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
519 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
521 /* determine capability flags */
524 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
525 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
527 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
528 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
529 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
530 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
533 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
534 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
535 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
539 * Some APs apparently get confused if our capabilities are better
540 * than theirs, so restrict what we advertise in the assoc request.
542 if (!(ap_vht_cap->vht_cap_info &
543 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
544 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
545 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
546 else if (!(ap_vht_cap->vht_cap_info &
547 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
548 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
551 * If some other vif is using the MU-MIMO capablity we cannot associate
552 * using MU-MIMO - this will lead to contradictions in the group-id
554 * Ownership is defined since association request, in order to avoid
555 * simultaneous associations with MU-MIMO.
557 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
558 bool disable_mu_mimo = false;
559 struct ieee80211_sub_if_data *other;
561 list_for_each_entry_rcu(other, &local->interfaces, list) {
562 if (other->flags & IEEE80211_SDATA_MU_MIMO_OWNER) {
563 disable_mu_mimo = true;
568 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
570 sdata->flags |= IEEE80211_SDATA_MU_MIMO_OWNER;
573 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
575 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
576 our_bf_sts = cap & mask;
578 if (ap_bf_sts < our_bf_sts) {
583 /* reserve and fill IE */
584 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
585 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
588 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
590 struct ieee80211_local *local = sdata->local;
591 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
592 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
594 struct ieee80211_mgmt *mgmt;
596 size_t offset = 0, noffset;
597 int i, count, rates_len, supp_rates_len, shift;
599 struct ieee80211_supported_band *sband;
600 struct ieee80211_chanctx_conf *chanctx_conf;
601 struct ieee80211_channel *chan;
602 u32 rate_flags, rates = 0;
604 sdata_assert_lock(sdata);
607 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
608 if (WARN_ON(!chanctx_conf)) {
612 chan = chanctx_conf->def.chan;
613 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
615 sband = local->hw.wiphy->bands[chan->band];
616 shift = ieee80211_vif_get_shift(&sdata->vif);
618 if (assoc_data->supp_rates_len) {
620 * Get all rates supported by the device and the AP as
621 * some APs don't like getting a superset of their rates
622 * in the association request (e.g. D-Link DAP 1353 in
625 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
626 assoc_data->supp_rates,
627 assoc_data->supp_rates_len,
631 * In case AP not provide any supported rates information
632 * before association, we send information element(s) with
633 * all rates that we support.
636 for (i = 0; i < sband->n_bitrates; i++) {
637 if ((rate_flags & sband->bitrates[i].flags)
645 skb = alloc_skb(local->hw.extra_tx_headroom +
646 sizeof(*mgmt) + /* bit too much but doesn't matter */
647 2 + assoc_data->ssid_len + /* SSID */
648 4 + rates_len + /* (extended) rates */
649 4 + /* power capability */
650 2 + 2 * sband->n_channels + /* supported channels */
651 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
652 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
653 assoc_data->ie_len + /* extra IEs */
659 skb_reserve(skb, local->hw.extra_tx_headroom);
661 capab = WLAN_CAPABILITY_ESS;
663 if (sband->band == IEEE80211_BAND_2GHZ) {
664 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
665 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
668 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
669 capab |= WLAN_CAPABILITY_PRIVACY;
671 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
672 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
673 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
675 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
676 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
678 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
680 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
681 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
682 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
684 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
686 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
687 IEEE80211_STYPE_REASSOC_REQ);
688 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
689 mgmt->u.reassoc_req.listen_interval =
690 cpu_to_le16(local->hw.conf.listen_interval);
691 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
695 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
696 IEEE80211_STYPE_ASSOC_REQ);
697 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
698 mgmt->u.assoc_req.listen_interval =
699 cpu_to_le16(local->hw.conf.listen_interval);
703 pos = skb_put(skb, 2 + assoc_data->ssid_len);
704 *pos++ = WLAN_EID_SSID;
705 *pos++ = assoc_data->ssid_len;
706 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
708 /* add all rates which were marked to be used above */
709 supp_rates_len = rates_len;
710 if (supp_rates_len > 8)
713 pos = skb_put(skb, supp_rates_len + 2);
714 *pos++ = WLAN_EID_SUPP_RATES;
715 *pos++ = supp_rates_len;
718 for (i = 0; i < sband->n_bitrates; i++) {
719 if (BIT(i) & rates) {
720 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
728 if (rates_len > count) {
729 pos = skb_put(skb, rates_len - count + 2);
730 *pos++ = WLAN_EID_EXT_SUPP_RATES;
731 *pos++ = rates_len - count;
733 for (i++; i < sband->n_bitrates; i++) {
734 if (BIT(i) & rates) {
736 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
743 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
744 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
745 pos = skb_put(skb, 4);
746 *pos++ = WLAN_EID_PWR_CAPABILITY;
748 *pos++ = 0; /* min tx power */
750 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
753 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
754 /* TODO: get this in reg domain format */
755 pos = skb_put(skb, 2 * sband->n_channels + 2);
756 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
757 *pos++ = 2 * sband->n_channels;
758 for (i = 0; i < sband->n_channels; i++) {
759 *pos++ = ieee80211_frequency_to_channel(
760 sband->channels[i].center_freq);
761 *pos++ = 1; /* one channel in the subband*/
765 /* if present, add any custom IEs that go before HT */
766 if (assoc_data->ie_len) {
767 static const u8 before_ht[] = {
770 WLAN_EID_EXT_SUPP_RATES,
771 WLAN_EID_PWR_CAPABILITY,
772 WLAN_EID_SUPPORTED_CHANNELS,
775 WLAN_EID_RRM_ENABLED_CAPABILITIES,
776 WLAN_EID_MOBILITY_DOMAIN,
777 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
778 WLAN_EID_RIC_DATA, /* reassoc only */
779 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
781 static const u8 after_ric[] = {
782 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
783 WLAN_EID_HT_CAPABILITY,
784 WLAN_EID_BSS_COEX_2040,
785 WLAN_EID_EXT_CAPABILITY,
786 WLAN_EID_QOS_TRAFFIC_CAPA,
787 WLAN_EID_TIM_BCAST_REQ,
788 WLAN_EID_INTERWORKING,
789 /* 60GHz doesn't happen right now */
790 WLAN_EID_VHT_CAPABILITY,
791 WLAN_EID_OPMODE_NOTIF,
794 noffset = ieee80211_ie_split_ric(assoc_data->ie,
797 ARRAY_SIZE(before_ht),
799 ARRAY_SIZE(after_ric),
801 pos = skb_put(skb, noffset - offset);
802 memcpy(pos, assoc_data->ie + offset, noffset - offset);
806 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
807 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
808 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
810 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
811 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
812 sband, chan, sdata->smps_mode);
814 /* if present, add any custom IEs that go before VHT */
815 if (assoc_data->ie_len) {
816 static const u8 before_vht[] = {
819 WLAN_EID_EXT_SUPP_RATES,
820 WLAN_EID_PWR_CAPABILITY,
821 WLAN_EID_SUPPORTED_CHANNELS,
824 WLAN_EID_RRM_ENABLED_CAPABILITIES,
825 WLAN_EID_MOBILITY_DOMAIN,
826 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
827 WLAN_EID_HT_CAPABILITY,
828 WLAN_EID_BSS_COEX_2040,
829 WLAN_EID_EXT_CAPABILITY,
830 WLAN_EID_QOS_TRAFFIC_CAPA,
831 WLAN_EID_TIM_BCAST_REQ,
832 WLAN_EID_INTERWORKING,
835 /* RIC already taken above, so no need to handle here anymore */
836 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
837 before_vht, ARRAY_SIZE(before_vht),
839 pos = skb_put(skb, noffset - offset);
840 memcpy(pos, assoc_data->ie + offset, noffset - offset);
844 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
845 ieee80211_add_vht_ie(sdata, skb, sband,
846 &assoc_data->ap_vht_cap);
848 /* if present, add any custom non-vendor IEs that go after HT */
849 if (assoc_data->ie_len) {
850 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
853 pos = skb_put(skb, noffset - offset);
854 memcpy(pos, assoc_data->ie + offset, noffset - offset);
858 if (assoc_data->wmm) {
859 if (assoc_data->uapsd) {
860 qos_info = ifmgd->uapsd_queues;
861 qos_info |= (ifmgd->uapsd_max_sp_len <<
862 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
867 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
870 /* add any remaining custom (i.e. vendor specific here) IEs */
871 if (assoc_data->ie_len) {
872 noffset = assoc_data->ie_len;
873 pos = skb_put(skb, noffset - offset);
874 memcpy(pos, assoc_data->ie + offset, noffset - offset);
877 drv_mgd_prepare_tx(local, sdata);
879 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
880 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
881 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
882 IEEE80211_TX_INTFL_MLME_CONN_TX;
883 ieee80211_tx_skb(sdata, skb);
886 void ieee80211_send_pspoll(struct ieee80211_local *local,
887 struct ieee80211_sub_if_data *sdata)
889 struct ieee80211_pspoll *pspoll;
892 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
896 pspoll = (struct ieee80211_pspoll *) skb->data;
897 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
899 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
900 ieee80211_tx_skb(sdata, skb);
903 void ieee80211_send_nullfunc(struct ieee80211_local *local,
904 struct ieee80211_sub_if_data *sdata,
908 struct ieee80211_hdr_3addr *nullfunc;
909 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
911 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
915 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
917 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
919 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
920 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
922 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
923 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
925 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
926 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
928 ieee80211_tx_skb(sdata, skb);
931 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
932 struct ieee80211_sub_if_data *sdata)
935 struct ieee80211_hdr *nullfunc;
938 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
941 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
945 skb_reserve(skb, local->hw.extra_tx_headroom);
947 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
948 memset(nullfunc, 0, 30);
949 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
950 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
951 nullfunc->frame_control = fc;
952 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
953 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
954 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
955 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
957 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
958 ieee80211_tx_skb(sdata, skb);
961 /* spectrum management related things */
962 static void ieee80211_chswitch_work(struct work_struct *work)
964 struct ieee80211_sub_if_data *sdata =
965 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
966 struct ieee80211_local *local = sdata->local;
967 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
970 if (!ieee80211_sdata_running(sdata))
974 mutex_lock(&local->mtx);
975 mutex_lock(&local->chanctx_mtx);
977 if (!ifmgd->associated)
980 if (!sdata->vif.csa_active)
984 * using reservation isn't immediate as it may be deferred until later
985 * with multi-vif. once reservation is complete it will re-schedule the
986 * work with no reserved_chanctx so verify chandef to check if it
987 * completed successfully
990 if (sdata->reserved_chanctx) {
992 * with multi-vif csa driver may call ieee80211_csa_finish()
993 * many times while waiting for other interfaces to use their
996 if (sdata->reserved_ready)
999 ret = ieee80211_vif_use_reserved_context(sdata);
1002 "failed to use reserved channel context, disconnecting (err=%d)\n",
1004 ieee80211_queue_work(&sdata->local->hw,
1005 &ifmgd->csa_connection_drop_work);
1012 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1013 &sdata->csa_chandef)) {
1015 "failed to finalize channel switch, disconnecting\n");
1016 ieee80211_queue_work(&sdata->local->hw,
1017 &ifmgd->csa_connection_drop_work);
1021 /* XXX: shouldn't really modify cfg80211-owned data! */
1022 ifmgd->associated->channel = sdata->csa_chandef.chan;
1024 ifmgd->csa_waiting_bcn = true;
1026 ieee80211_sta_reset_beacon_monitor(sdata);
1027 ieee80211_sta_reset_conn_monitor(sdata);
1030 mutex_unlock(&local->chanctx_mtx);
1031 mutex_unlock(&local->mtx);
1032 sdata_unlock(sdata);
1035 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1037 struct ieee80211_local *local = sdata->local;
1038 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1041 sdata_assert_lock(sdata);
1043 WARN_ON(!sdata->vif.csa_active);
1045 if (sdata->csa_block_tx) {
1046 ieee80211_wake_vif_queues(local, sdata,
1047 IEEE80211_QUEUE_STOP_REASON_CSA);
1048 sdata->csa_block_tx = false;
1051 sdata->vif.csa_active = false;
1052 ifmgd->csa_waiting_bcn = false;
1054 ret = drv_post_channel_switch(sdata);
1057 "driver post channel switch failed, disconnecting\n");
1058 ieee80211_queue_work(&local->hw,
1059 &ifmgd->csa_connection_drop_work);
1063 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1066 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1068 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1069 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1071 trace_api_chswitch_done(sdata, success);
1074 "driver channel switch failed, disconnecting\n");
1075 ieee80211_queue_work(&sdata->local->hw,
1076 &ifmgd->csa_connection_drop_work);
1078 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1081 EXPORT_SYMBOL(ieee80211_chswitch_done);
1083 static void ieee80211_chswitch_timer(unsigned long data)
1085 struct ieee80211_sub_if_data *sdata =
1086 (struct ieee80211_sub_if_data *) data;
1088 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1092 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1093 u64 timestamp, u32 device_timestamp,
1094 struct ieee802_11_elems *elems,
1097 struct ieee80211_local *local = sdata->local;
1098 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1099 struct cfg80211_bss *cbss = ifmgd->associated;
1100 struct ieee80211_chanctx_conf *conf;
1101 struct ieee80211_chanctx *chanctx;
1102 enum ieee80211_band current_band;
1103 struct ieee80211_csa_ie csa_ie;
1104 struct ieee80211_channel_switch ch_switch;
1107 sdata_assert_lock(sdata);
1112 if (local->scanning)
1115 /* disregard subsequent announcements if we are already processing */
1116 if (sdata->vif.csa_active)
1119 current_band = cbss->channel->band;
1120 memset(&csa_ie, 0, sizeof(csa_ie));
1121 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1123 ifmgd->associated->bssid, &csa_ie);
1125 ieee80211_queue_work(&local->hw,
1126 &ifmgd->csa_connection_drop_work);
1130 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1131 IEEE80211_CHAN_DISABLED)) {
1133 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1134 ifmgd->associated->bssid,
1135 csa_ie.chandef.chan->center_freq,
1136 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1137 csa_ie.chandef.center_freq2);
1138 ieee80211_queue_work(&local->hw,
1139 &ifmgd->csa_connection_drop_work);
1143 if (cfg80211_chandef_identical(&csa_ie.chandef,
1144 &sdata->vif.bss_conf.chandef)) {
1145 if (ifmgd->csa_ignored_same_chan)
1148 "AP %pM tries to chanswitch to same channel, ignore\n",
1149 ifmgd->associated->bssid);
1150 ifmgd->csa_ignored_same_chan = true;
1155 * Drop all TDLS peers - either we disconnect or move to a different
1156 * channel from this point on. There's no telling what our peer will do.
1157 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1158 * have an incompatible wider chandef.
1160 ieee80211_teardown_tdls_peers(sdata);
1162 mutex_lock(&local->mtx);
1163 mutex_lock(&local->chanctx_mtx);
1164 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1165 lockdep_is_held(&local->chanctx_mtx));
1168 "no channel context assigned to vif?, disconnecting\n");
1169 goto drop_connection;
1172 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1174 if (local->use_chanctx &&
1175 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1177 "driver doesn't support chan-switch with channel contexts\n");
1178 goto drop_connection;
1181 ch_switch.timestamp = timestamp;
1182 ch_switch.device_timestamp = device_timestamp;
1183 ch_switch.block_tx = csa_ie.mode;
1184 ch_switch.chandef = csa_ie.chandef;
1185 ch_switch.count = csa_ie.count;
1187 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1189 "preparing for channel switch failed, disconnecting\n");
1190 goto drop_connection;
1193 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1194 chanctx->mode, false);
1197 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1199 goto drop_connection;
1201 mutex_unlock(&local->chanctx_mtx);
1203 sdata->vif.csa_active = true;
1204 sdata->csa_chandef = csa_ie.chandef;
1205 sdata->csa_block_tx = csa_ie.mode;
1206 ifmgd->csa_ignored_same_chan = false;
1208 if (sdata->csa_block_tx)
1209 ieee80211_stop_vif_queues(local, sdata,
1210 IEEE80211_QUEUE_STOP_REASON_CSA);
1211 mutex_unlock(&local->mtx);
1213 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1216 if (local->ops->channel_switch) {
1217 /* use driver's channel switch callback */
1218 drv_channel_switch(local, sdata, &ch_switch);
1222 /* channel switch handled in software */
1223 if (csa_ie.count <= 1)
1224 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1226 mod_timer(&ifmgd->chswitch_timer,
1227 TU_TO_EXP_TIME((csa_ie.count - 1) *
1228 cbss->beacon_interval));
1231 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1232 mutex_unlock(&local->chanctx_mtx);
1233 mutex_unlock(&local->mtx);
1237 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1238 struct ieee80211_channel *channel,
1239 const u8 *country_ie, u8 country_ie_len,
1240 const u8 *pwr_constr_elem,
1241 int *chan_pwr, int *pwr_reduction)
1243 struct ieee80211_country_ie_triplet *triplet;
1244 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1245 int i, chan_increment;
1246 bool have_chan_pwr = false;
1249 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1252 triplet = (void *)(country_ie + 3);
1253 country_ie_len -= 3;
1255 switch (channel->band) {
1259 case IEEE80211_BAND_2GHZ:
1260 case IEEE80211_BAND_60GHZ:
1263 case IEEE80211_BAND_5GHZ:
1269 while (country_ie_len >= 3) {
1270 u8 first_channel = triplet->chans.first_channel;
1272 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1275 for (i = 0; i < triplet->chans.num_channels; i++) {
1276 if (first_channel + i * chan_increment == chan) {
1277 have_chan_pwr = true;
1278 *chan_pwr = triplet->chans.max_power;
1287 country_ie_len -= 3;
1290 if (have_chan_pwr && pwr_constr_elem)
1291 *pwr_reduction = *pwr_constr_elem;
1295 return have_chan_pwr;
1298 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1299 struct ieee80211_channel *channel,
1300 const u8 *cisco_dtpc_ie,
1303 /* From practical testing, the first data byte of the DTPC element
1304 * seems to contain the requested dBm level, and the CLI on Cisco
1305 * APs clearly state the range is -127 to 127 dBm, which indicates
1306 * a signed byte, although it seemingly never actually goes negative.
1307 * The other byte seems to always be zero.
1309 *pwr_level = (__s8)cisco_dtpc_ie[4];
1312 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1313 struct ieee80211_channel *channel,
1314 struct ieee80211_mgmt *mgmt,
1315 const u8 *country_ie, u8 country_ie_len,
1316 const u8 *pwr_constr_ie,
1317 const u8 *cisco_dtpc_ie)
1319 bool has_80211h_pwr = false, has_cisco_pwr = false;
1320 int chan_pwr = 0, pwr_reduction_80211h = 0;
1321 int pwr_level_cisco, pwr_level_80211h;
1323 __le16 capab = mgmt->u.probe_resp.capab_info;
1326 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1327 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1328 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1329 sdata, channel, country_ie, country_ie_len,
1330 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1332 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1335 if (cisco_dtpc_ie) {
1336 ieee80211_find_cisco_dtpc(
1337 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1338 has_cisco_pwr = true;
1341 if (!has_80211h_pwr && !has_cisco_pwr)
1344 /* If we have both 802.11h and Cisco DTPC, apply both limits
1345 * by picking the smallest of the two power levels advertised.
1347 if (has_80211h_pwr &&
1348 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1349 new_ap_level = pwr_level_80211h;
1351 if (sdata->ap_power_level == new_ap_level)
1355 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1356 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1357 sdata->u.mgd.bssid);
1358 } else { /* has_cisco_pwr is always true here. */
1359 new_ap_level = pwr_level_cisco;
1361 if (sdata->ap_power_level == new_ap_level)
1365 "Limiting TX power to %d dBm as advertised by %pM\n",
1366 pwr_level_cisco, sdata->u.mgd.bssid);
1369 sdata->ap_power_level = new_ap_level;
1370 if (__ieee80211_recalc_txpower(sdata))
1371 return BSS_CHANGED_TXPOWER;
1376 static void ieee80211_enable_ps(struct ieee80211_local *local,
1377 struct ieee80211_sub_if_data *sdata)
1379 struct ieee80211_conf *conf = &local->hw.conf;
1382 * If we are scanning right now then the parameters will
1383 * take effect when scan finishes.
1385 if (local->scanning)
1388 if (conf->dynamic_ps_timeout > 0 &&
1389 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1390 mod_timer(&local->dynamic_ps_timer, jiffies +
1391 msecs_to_jiffies(conf->dynamic_ps_timeout));
1393 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1394 ieee80211_send_nullfunc(local, sdata, true);
1396 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1397 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1400 conf->flags |= IEEE80211_CONF_PS;
1401 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1405 static void ieee80211_change_ps(struct ieee80211_local *local)
1407 struct ieee80211_conf *conf = &local->hw.conf;
1409 if (local->ps_sdata) {
1410 ieee80211_enable_ps(local, local->ps_sdata);
1411 } else if (conf->flags & IEEE80211_CONF_PS) {
1412 conf->flags &= ~IEEE80211_CONF_PS;
1413 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1414 del_timer_sync(&local->dynamic_ps_timer);
1415 cancel_work_sync(&local->dynamic_ps_enable_work);
1419 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1421 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1422 struct sta_info *sta = NULL;
1423 bool authorized = false;
1425 if (!mgd->powersave)
1431 if (!mgd->associated)
1434 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1437 if (!mgd->have_beacon)
1441 sta = sta_info_get(sdata, mgd->bssid);
1443 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1449 /* need to hold RTNL or interface lock */
1450 void ieee80211_recalc_ps(struct ieee80211_local *local)
1452 struct ieee80211_sub_if_data *sdata, *found = NULL;
1456 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1457 local->ps_sdata = NULL;
1461 list_for_each_entry(sdata, &local->interfaces, list) {
1462 if (!ieee80211_sdata_running(sdata))
1464 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1465 /* If an AP vif is found, then disable PS
1466 * by setting the count to zero thereby setting
1472 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1478 if (count == 1 && ieee80211_powersave_allowed(found)) {
1479 u8 dtimper = found->u.mgd.dtim_period;
1482 beaconint_us = ieee80211_tu_to_usec(
1483 found->vif.bss_conf.beacon_int);
1485 timeout = local->dynamic_ps_forced_timeout;
1488 local->hw.conf.dynamic_ps_timeout = timeout;
1490 /* If the TIM IE is invalid, pretend the value is 1 */
1494 local->hw.conf.ps_dtim_period = dtimper;
1495 local->ps_sdata = found;
1497 local->ps_sdata = NULL;
1500 ieee80211_change_ps(local);
1503 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1505 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1507 if (sdata->vif.bss_conf.ps != ps_allowed) {
1508 sdata->vif.bss_conf.ps = ps_allowed;
1509 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1513 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1515 struct ieee80211_local *local =
1516 container_of(work, struct ieee80211_local,
1517 dynamic_ps_disable_work);
1519 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1520 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1521 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1524 ieee80211_wake_queues_by_reason(&local->hw,
1525 IEEE80211_MAX_QUEUE_MAP,
1526 IEEE80211_QUEUE_STOP_REASON_PS,
1530 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1532 struct ieee80211_local *local =
1533 container_of(work, struct ieee80211_local,
1534 dynamic_ps_enable_work);
1535 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1536 struct ieee80211_if_managed *ifmgd;
1537 unsigned long flags;
1540 /* can only happen when PS was just disabled anyway */
1544 ifmgd = &sdata->u.mgd;
1546 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1549 if (local->hw.conf.dynamic_ps_timeout > 0) {
1550 /* don't enter PS if TX frames are pending */
1551 if (drv_tx_frames_pending(local)) {
1552 mod_timer(&local->dynamic_ps_timer, jiffies +
1554 local->hw.conf.dynamic_ps_timeout));
1559 * transmission can be stopped by others which leads to
1560 * dynamic_ps_timer expiry. Postpone the ps timer if it
1561 * is not the actual idle state.
1563 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1564 for (q = 0; q < local->hw.queues; q++) {
1565 if (local->queue_stop_reasons[q]) {
1566 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1568 mod_timer(&local->dynamic_ps_timer, jiffies +
1570 local->hw.conf.dynamic_ps_timeout));
1574 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1577 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1578 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1579 if (drv_tx_frames_pending(local)) {
1580 mod_timer(&local->dynamic_ps_timer, jiffies +
1582 local->hw.conf.dynamic_ps_timeout));
1584 ieee80211_send_nullfunc(local, sdata, true);
1585 /* Flush to get the tx status of nullfunc frame */
1586 ieee80211_flush_queues(local, sdata, false);
1590 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1591 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1592 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1593 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1594 local->hw.conf.flags |= IEEE80211_CONF_PS;
1595 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1599 void ieee80211_dynamic_ps_timer(unsigned long data)
1601 struct ieee80211_local *local = (void *) data;
1603 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1606 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1608 struct delayed_work *delayed_work = to_delayed_work(work);
1609 struct ieee80211_sub_if_data *sdata =
1610 container_of(delayed_work, struct ieee80211_sub_if_data,
1611 dfs_cac_timer_work);
1612 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1614 mutex_lock(&sdata->local->mtx);
1615 if (sdata->wdev.cac_started) {
1616 ieee80211_vif_release_channel(sdata);
1617 cfg80211_cac_event(sdata->dev, &chandef,
1618 NL80211_RADAR_CAC_FINISHED,
1621 mutex_unlock(&sdata->local->mtx);
1625 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1627 struct ieee80211_local *local = sdata->local;
1628 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1632 if (local->hw.queues < IEEE80211_NUM_ACS)
1635 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1636 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1638 unsigned long now = jiffies;
1640 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1641 tx_tspec->admitted_time &&
1642 time_after(now, tx_tspec->time_slice_start + HZ)) {
1643 tx_tspec->consumed_tx_time = 0;
1644 tx_tspec->time_slice_start = now;
1646 if (tx_tspec->downgraded)
1648 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1651 switch (tx_tspec->action) {
1652 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1653 /* take the original parameters */
1654 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1656 "failed to set TX queue parameters for queue %d\n",
1658 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1659 tx_tspec->downgraded = false;
1662 case TX_TSPEC_ACTION_DOWNGRADE:
1663 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1664 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1668 /* downgrade next lower non-ACM AC */
1669 for (non_acm_ac = ac + 1;
1670 non_acm_ac < IEEE80211_NUM_ACS;
1672 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1674 /* The loop will result in using BK even if it requires
1675 * admission control, such configuration makes no sense
1676 * and we have to transmit somehow - the AC selection
1677 * does the same thing.
1679 if (drv_conf_tx(local, sdata, ac,
1680 &sdata->tx_conf[non_acm_ac]))
1682 "failed to set TX queue parameters for queue %d\n",
1684 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1686 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1687 tx_tspec->time_slice_start + HZ - now + 1);
1689 case TX_TSPEC_ACTION_NONE:
1698 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1700 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1701 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1704 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1706 struct ieee80211_sub_if_data *sdata;
1708 sdata = container_of(work, struct ieee80211_sub_if_data,
1709 u.mgd.tx_tspec_wk.work);
1710 ieee80211_sta_handle_tspec_ac_params(sdata);
1714 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1715 struct ieee80211_sub_if_data *sdata,
1716 const u8 *wmm_param, size_t wmm_param_len)
1718 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1719 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1723 u8 uapsd_queues = 0;
1725 if (!local->ops->conf_tx)
1728 if (local->hw.queues < IEEE80211_NUM_ACS)
1734 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1737 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1738 uapsd_queues = ifmgd->uapsd_queues;
1740 count = wmm_param[6] & 0x0f;
1741 if (count == ifmgd->wmm_last_param_set)
1743 ifmgd->wmm_last_param_set = count;
1745 pos = wmm_param + 8;
1746 left = wmm_param_len - 8;
1748 memset(¶ms, 0, sizeof(params));
1751 for (; left >= 4; left -= 4, pos += 4) {
1752 int aci = (pos[0] >> 5) & 0x03;
1753 int acm = (pos[0] >> 4) & 0x01;
1758 ac = IEEE80211_AC_BK;
1760 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1761 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1765 ac = IEEE80211_AC_VI;
1767 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1768 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1772 ac = IEEE80211_AC_VO;
1774 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1775 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1780 ac = IEEE80211_AC_BE;
1782 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1783 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1788 params[ac].aifs = pos[0] & 0x0f;
1790 if (params[ac].aifs < 2) {
1792 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
1793 params[ac].aifs, aci);
1794 params[ac].aifs = 2;
1796 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1797 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
1798 params[ac].txop = get_unaligned_le16(pos + 2);
1799 params[ac].acm = acm;
1800 params[ac].uapsd = uapsd;
1802 if (params[ac].cw_min > params[ac].cw_max) {
1804 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
1805 params[ac].cw_min, params[ac].cw_max, aci);
1810 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1812 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1814 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
1815 params[ac].txop, params[ac].uapsd,
1816 ifmgd->tx_tspec[ac].downgraded);
1817 sdata->tx_conf[ac] = params[ac];
1818 if (!ifmgd->tx_tspec[ac].downgraded &&
1819 drv_conf_tx(local, sdata, ac, ¶ms[ac]))
1821 "failed to set TX queue parameters for AC %d\n",
1825 /* enable WMM or activate new settings */
1826 sdata->vif.bss_conf.qos = true;
1830 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1832 lockdep_assert_held(&sdata->local->mtx);
1834 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1835 ieee80211_run_deferred_scan(sdata->local);
1838 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1840 mutex_lock(&sdata->local->mtx);
1841 __ieee80211_stop_poll(sdata);
1842 mutex_unlock(&sdata->local->mtx);
1845 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1846 u16 capab, bool erp_valid, u8 erp)
1848 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1850 bool use_protection;
1851 bool use_short_preamble;
1852 bool use_short_slot;
1855 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1856 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1858 use_protection = false;
1859 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1862 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1863 if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
1864 use_short_slot = true;
1866 if (use_protection != bss_conf->use_cts_prot) {
1867 bss_conf->use_cts_prot = use_protection;
1868 changed |= BSS_CHANGED_ERP_CTS_PROT;
1871 if (use_short_preamble != bss_conf->use_short_preamble) {
1872 bss_conf->use_short_preamble = use_short_preamble;
1873 changed |= BSS_CHANGED_ERP_PREAMBLE;
1876 if (use_short_slot != bss_conf->use_short_slot) {
1877 bss_conf->use_short_slot = use_short_slot;
1878 changed |= BSS_CHANGED_ERP_SLOT;
1884 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1885 struct cfg80211_bss *cbss,
1886 u32 bss_info_changed)
1888 struct ieee80211_bss *bss = (void *)cbss->priv;
1889 struct ieee80211_local *local = sdata->local;
1890 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1892 bss_info_changed |= BSS_CHANGED_ASSOC;
1893 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1894 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1896 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1897 beacon_loss_count * bss_conf->beacon_int));
1899 sdata->u.mgd.associated = cbss;
1900 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1902 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1904 if (sdata->vif.p2p ||
1905 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
1906 const struct cfg80211_bss_ies *ies;
1909 ies = rcu_dereference(cbss->ies);
1913 ret = cfg80211_get_p2p_attr(
1914 ies->data, ies->len,
1915 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1916 (u8 *) &bss_conf->p2p_noa_attr,
1917 sizeof(bss_conf->p2p_noa_attr));
1919 sdata->u.mgd.p2p_noa_index =
1920 bss_conf->p2p_noa_attr.index;
1921 bss_info_changed |= BSS_CHANGED_P2P_PS;
1927 /* just to be sure */
1928 ieee80211_stop_poll(sdata);
1930 ieee80211_led_assoc(local, 1);
1932 if (sdata->u.mgd.have_beacon) {
1934 * If the AP is buggy we may get here with no DTIM period
1935 * known, so assume it's 1 which is the only safe assumption
1936 * in that case, although if the TIM IE is broken powersave
1937 * probably just won't work at all.
1939 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1940 bss_conf->beacon_rate = bss->beacon_rate;
1941 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1943 bss_conf->beacon_rate = NULL;
1944 bss_conf->dtim_period = 0;
1947 bss_conf->assoc = 1;
1949 /* Tell the driver to monitor connection quality (if supported) */
1950 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1951 bss_conf->cqm_rssi_thold)
1952 bss_info_changed |= BSS_CHANGED_CQM;
1954 /* Enable ARP filtering */
1955 if (bss_conf->arp_addr_cnt)
1956 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1958 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1960 mutex_lock(&local->iflist_mtx);
1961 ieee80211_recalc_ps(local);
1962 mutex_unlock(&local->iflist_mtx);
1964 ieee80211_recalc_smps(sdata);
1965 ieee80211_recalc_ps_vif(sdata);
1967 netif_carrier_on(sdata->dev);
1970 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1971 u16 stype, u16 reason, bool tx,
1974 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1975 struct ieee80211_local *local = sdata->local;
1978 sdata_assert_lock(sdata);
1980 if (WARN_ON_ONCE(tx && !frame_buf))
1983 if (WARN_ON(!ifmgd->associated))
1986 ieee80211_stop_poll(sdata);
1988 ifmgd->associated = NULL;
1989 netif_carrier_off(sdata->dev);
1992 * if we want to get out of ps before disassoc (why?) we have
1993 * to do it before sending disassoc, as otherwise the null-packet
1996 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1997 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1998 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2000 local->ps_sdata = NULL;
2002 /* disable per-vif ps */
2003 ieee80211_recalc_ps_vif(sdata);
2005 /* make sure ongoing transmission finishes */
2009 * drop any frame before deauth/disassoc, this can be data or
2010 * management frame. Since we are disconnecting, we should not
2011 * insist sending these frames which can take time and delay
2012 * the disconnection and possible the roaming.
2015 ieee80211_flush_queues(local, sdata, true);
2017 /* deauthenticate/disassociate now */
2018 if (tx || frame_buf)
2019 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2020 reason, tx, frame_buf);
2022 /* flush out frame - make sure the deauth was actually sent */
2024 ieee80211_flush_queues(local, sdata, false);
2026 /* clear bssid only after building the needed mgmt frames */
2027 eth_zero_addr(ifmgd->bssid);
2029 /* remove AP and TDLS peers */
2030 sta_info_flush(sdata);
2032 /* finally reset all BSS / config parameters */
2033 changed |= ieee80211_reset_erp_info(sdata);
2035 ieee80211_led_assoc(local, 0);
2036 changed |= BSS_CHANGED_ASSOC;
2037 sdata->vif.bss_conf.assoc = false;
2039 ifmgd->p2p_noa_index = -1;
2040 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2041 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2043 /* on the next assoc, re-program HT/VHT parameters */
2044 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2045 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2046 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2047 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2049 /* reset MU-MIMO ownership and group data */
2050 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2051 sizeof(sdata->vif.bss_conf.mu_group.membership));
2052 memset(sdata->vif.bss_conf.mu_group.position, 0,
2053 sizeof(sdata->vif.bss_conf.mu_group.position));
2054 changed |= BSS_CHANGED_MU_GROUPS;
2055 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2057 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2059 del_timer_sync(&local->dynamic_ps_timer);
2060 cancel_work_sync(&local->dynamic_ps_enable_work);
2062 /* Disable ARP filtering */
2063 if (sdata->vif.bss_conf.arp_addr_cnt)
2064 changed |= BSS_CHANGED_ARP_FILTER;
2066 sdata->vif.bss_conf.qos = false;
2067 changed |= BSS_CHANGED_QOS;
2069 /* The BSSID (not really interesting) and HT changed */
2070 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2071 ieee80211_bss_info_change_notify(sdata, changed);
2073 /* disassociated - set to defaults now */
2074 ieee80211_set_wmm_default(sdata, false, false);
2076 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2077 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2078 del_timer_sync(&sdata->u.mgd.timer);
2079 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2081 sdata->vif.bss_conf.dtim_period = 0;
2082 sdata->vif.bss_conf.beacon_rate = NULL;
2084 ifmgd->have_beacon = false;
2087 mutex_lock(&local->mtx);
2088 ieee80211_vif_release_channel(sdata);
2090 sdata->vif.csa_active = false;
2091 ifmgd->csa_waiting_bcn = false;
2092 ifmgd->csa_ignored_same_chan = false;
2093 if (sdata->csa_block_tx) {
2094 ieee80211_wake_vif_queues(local, sdata,
2095 IEEE80211_QUEUE_STOP_REASON_CSA);
2096 sdata->csa_block_tx = false;
2098 mutex_unlock(&local->mtx);
2100 /* existing TX TSPEC sessions no longer exist */
2101 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2102 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2104 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2107 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2108 struct ieee80211_hdr *hdr)
2111 * We can postpone the mgd.timer whenever receiving unicast frames
2112 * from AP because we know that the connection is working both ways
2113 * at that time. But multicast frames (and hence also beacons) must
2114 * be ignored here, because we need to trigger the timer during
2115 * data idle periods for sending the periodic probe request to the
2116 * AP we're connected to.
2118 if (is_multicast_ether_addr(hdr->addr1))
2121 ieee80211_sta_reset_conn_monitor(sdata);
2124 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2126 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2127 struct ieee80211_local *local = sdata->local;
2129 mutex_lock(&local->mtx);
2130 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2133 __ieee80211_stop_poll(sdata);
2135 mutex_lock(&local->iflist_mtx);
2136 ieee80211_recalc_ps(local);
2137 mutex_unlock(&local->iflist_mtx);
2139 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2143 * We've received a probe response, but are not sure whether
2144 * we have or will be receiving any beacons or data, so let's
2145 * schedule the timers again, just in case.
2147 ieee80211_sta_reset_beacon_monitor(sdata);
2149 mod_timer(&ifmgd->conn_mon_timer,
2150 round_jiffies_up(jiffies +
2151 IEEE80211_CONNECTION_IDLE_TIME));
2153 mutex_unlock(&local->mtx);
2156 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2157 struct ieee80211_hdr *hdr,
2160 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2161 u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2162 int ac = ieee80211_ac_from_tid(tid);
2163 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2164 unsigned long now = jiffies;
2166 if (likely(!tx_tspec->admitted_time))
2169 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2170 tx_tspec->consumed_tx_time = 0;
2171 tx_tspec->time_slice_start = now;
2173 if (tx_tspec->downgraded) {
2174 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2175 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2179 if (tx_tspec->downgraded)
2182 tx_tspec->consumed_tx_time += tx_time;
2184 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2185 tx_tspec->downgraded = true;
2186 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2187 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2191 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2192 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2194 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2196 if (!ieee80211_is_data(hdr->frame_control))
2199 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2200 sdata->u.mgd.probe_send_count > 0) {
2202 ieee80211_sta_reset_conn_monitor(sdata);
2204 sdata->u.mgd.nullfunc_failed = true;
2205 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2210 ieee80211_sta_reset_conn_monitor(sdata);
2213 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2215 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2217 u8 *dst = ifmgd->associated->bssid;
2218 u8 unicast_limit = max(1, max_probe_tries - 3);
2221 * Try sending broadcast probe requests for the last three
2222 * probe requests after the first ones failed since some
2223 * buggy APs only support broadcast probe requests.
2225 if (ifmgd->probe_send_count >= unicast_limit)
2229 * When the hardware reports an accurate Tx ACK status, it's
2230 * better to send a nullfunc frame instead of a probe request,
2231 * as it will kick us off the AP quickly if we aren't associated
2232 * anymore. The timeout will be reset if the frame is ACKed by
2235 ifmgd->probe_send_count++;
2237 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2238 ifmgd->nullfunc_failed = false;
2239 ieee80211_send_nullfunc(sdata->local, sdata, false);
2244 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2245 if (WARN_ON_ONCE(ssid == NULL))
2250 ieee80211_send_probe_req(sdata, sdata->vif.addr, dst,
2251 ssid + 2, ssid_len, NULL,
2252 0, (u32) -1, true, 0,
2253 ifmgd->associated->channel, false);
2257 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2258 run_again(sdata, ifmgd->probe_timeout);
2261 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2264 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2265 bool already = false;
2267 if (!ieee80211_sdata_running(sdata))
2272 if (!ifmgd->associated)
2275 mutex_lock(&sdata->local->mtx);
2277 if (sdata->local->tmp_channel || sdata->local->scanning) {
2278 mutex_unlock(&sdata->local->mtx);
2283 mlme_dbg_ratelimited(sdata,
2284 "detected beacon loss from AP (missed %d beacons) - probing\n",
2287 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2291 * The driver/our work has already reported this event or the
2292 * connection monitoring has kicked in and we have already sent
2293 * a probe request. Or maybe the AP died and the driver keeps
2294 * reporting until we disassociate...
2296 * In either case we have to ignore the current call to this
2297 * function (except for setting the correct probe reason bit)
2298 * because otherwise we would reset the timer every time and
2299 * never check whether we received a probe response!
2301 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2304 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2306 mutex_unlock(&sdata->local->mtx);
2311 mutex_lock(&sdata->local->iflist_mtx);
2312 ieee80211_recalc_ps(sdata->local);
2313 mutex_unlock(&sdata->local->iflist_mtx);
2315 ifmgd->probe_send_count = 0;
2316 ieee80211_mgd_probe_ap_send(sdata);
2318 sdata_unlock(sdata);
2321 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2322 struct ieee80211_vif *vif)
2324 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2325 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2326 struct cfg80211_bss *cbss;
2327 struct sk_buff *skb;
2331 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2334 sdata_assert_lock(sdata);
2336 if (ifmgd->associated)
2337 cbss = ifmgd->associated;
2338 else if (ifmgd->auth_data)
2339 cbss = ifmgd->auth_data->bss;
2340 else if (ifmgd->assoc_data)
2341 cbss = ifmgd->assoc_data->bss;
2346 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2347 if (WARN_ON_ONCE(ssid == NULL))
2352 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2353 (u32) -1, cbss->channel,
2360 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2362 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2363 const u8 *buf, size_t len, bool tx,
2366 struct ieee80211_event event = {
2368 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2369 .u.mlme.reason = reason,
2373 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2375 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2377 drv_event_callback(sdata->local, sdata, &event);
2380 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2382 struct ieee80211_local *local = sdata->local;
2383 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2384 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2387 if (!ifmgd->associated) {
2388 sdata_unlock(sdata);
2392 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2393 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2395 mutex_lock(&local->mtx);
2396 sdata->vif.csa_active = false;
2397 ifmgd->csa_waiting_bcn = false;
2398 if (sdata->csa_block_tx) {
2399 ieee80211_wake_vif_queues(local, sdata,
2400 IEEE80211_QUEUE_STOP_REASON_CSA);
2401 sdata->csa_block_tx = false;
2403 mutex_unlock(&local->mtx);
2405 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
2406 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2408 sdata_unlock(sdata);
2411 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2413 struct ieee80211_sub_if_data *sdata =
2414 container_of(work, struct ieee80211_sub_if_data,
2415 u.mgd.beacon_connection_loss_work);
2416 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2418 if (ifmgd->associated)
2419 ifmgd->beacon_loss_count++;
2421 if (ifmgd->connection_loss) {
2422 sdata_info(sdata, "Connection to AP %pM lost\n",
2424 __ieee80211_disconnect(sdata);
2426 ieee80211_mgd_probe_ap(sdata, true);
2430 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2432 struct ieee80211_sub_if_data *sdata =
2433 container_of(work, struct ieee80211_sub_if_data,
2434 u.mgd.csa_connection_drop_work);
2436 __ieee80211_disconnect(sdata);
2439 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2441 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2442 struct ieee80211_hw *hw = &sdata->local->hw;
2444 trace_api_beacon_loss(sdata);
2446 sdata->u.mgd.connection_loss = false;
2447 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2449 EXPORT_SYMBOL(ieee80211_beacon_loss);
2451 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2453 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2454 struct ieee80211_hw *hw = &sdata->local->hw;
2456 trace_api_connection_loss(sdata);
2458 sdata->u.mgd.connection_loss = true;
2459 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2461 EXPORT_SYMBOL(ieee80211_connection_loss);
2464 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2467 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2469 sdata_assert_lock(sdata);
2473 * we are not authenticated yet, the only timer that could be
2474 * running is the timeout for the authentication response which
2475 * which is not relevant anymore.
2477 del_timer_sync(&sdata->u.mgd.timer);
2478 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2480 eth_zero_addr(sdata->u.mgd.bssid);
2481 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2482 sdata->u.mgd.flags = 0;
2483 mutex_lock(&sdata->local->mtx);
2484 ieee80211_vif_release_channel(sdata);
2485 mutex_unlock(&sdata->local->mtx);
2488 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2490 sdata->u.mgd.auth_data = NULL;
2493 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2496 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2498 sdata_assert_lock(sdata);
2502 * we are not associated yet, the only timer that could be
2503 * running is the timeout for the association response which
2504 * which is not relevant anymore.
2506 del_timer_sync(&sdata->u.mgd.timer);
2507 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2509 eth_zero_addr(sdata->u.mgd.bssid);
2510 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2511 sdata->u.mgd.flags = 0;
2512 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2513 mutex_lock(&sdata->local->mtx);
2514 ieee80211_vif_release_channel(sdata);
2515 mutex_unlock(&sdata->local->mtx);
2519 sdata->u.mgd.assoc_data = NULL;
2522 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2523 struct ieee80211_mgmt *mgmt, size_t len)
2525 struct ieee80211_local *local = sdata->local;
2526 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2528 struct ieee802_11_elems elems;
2531 pos = mgmt->u.auth.variable;
2532 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2533 if (!elems.challenge)
2535 auth_data->expected_transaction = 4;
2536 drv_mgd_prepare_tx(sdata->local, sdata);
2537 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2538 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2539 IEEE80211_TX_INTFL_MLME_CONN_TX;
2540 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2541 elems.challenge - 2, elems.challenge_len + 2,
2542 auth_data->bss->bssid, auth_data->bss->bssid,
2543 auth_data->key, auth_data->key_len,
2544 auth_data->key_idx, tx_flags);
2547 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2548 struct ieee80211_mgmt *mgmt, size_t len)
2550 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2552 u16 auth_alg, auth_transaction, status_code;
2553 struct sta_info *sta;
2554 struct ieee80211_event event = {
2556 .u.mlme.data = AUTH_EVENT,
2559 sdata_assert_lock(sdata);
2564 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2567 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2569 if (!ether_addr_equal(bssid, mgmt->bssid))
2572 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2573 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2574 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2576 if (auth_alg != ifmgd->auth_data->algorithm ||
2577 auth_transaction != ifmgd->auth_data->expected_transaction) {
2578 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2579 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2581 ifmgd->auth_data->expected_transaction);
2585 if (status_code != WLAN_STATUS_SUCCESS) {
2586 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2587 mgmt->sa, status_code);
2588 ieee80211_destroy_auth_data(sdata, false);
2589 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2590 event.u.mlme.status = MLME_DENIED;
2591 event.u.mlme.reason = status_code;
2592 drv_event_callback(sdata->local, sdata, &event);
2596 switch (ifmgd->auth_data->algorithm) {
2597 case WLAN_AUTH_OPEN:
2598 case WLAN_AUTH_LEAP:
2602 case WLAN_AUTH_SHARED_KEY:
2603 if (ifmgd->auth_data->expected_transaction != 4) {
2604 ieee80211_auth_challenge(sdata, mgmt, len);
2605 /* need another frame */
2610 WARN_ONCE(1, "invalid auth alg %d",
2611 ifmgd->auth_data->algorithm);
2615 event.u.mlme.status = MLME_SUCCESS;
2616 drv_event_callback(sdata->local, sdata, &event);
2617 sdata_info(sdata, "authenticated\n");
2618 ifmgd->auth_data->done = true;
2619 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2620 ifmgd->auth_data->timeout_started = true;
2621 run_again(sdata, ifmgd->auth_data->timeout);
2623 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2624 ifmgd->auth_data->expected_transaction != 2) {
2626 * Report auth frame to user space for processing since another
2627 * round of Authentication frames is still needed.
2629 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2633 /* move station state to auth */
2634 mutex_lock(&sdata->local->sta_mtx);
2635 sta = sta_info_get(sdata, bssid);
2637 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2640 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2641 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2644 mutex_unlock(&sdata->local->sta_mtx);
2646 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2649 mutex_unlock(&sdata->local->sta_mtx);
2650 /* ignore frame -- wait for timeout */
2653 #define case_WLAN(type) \
2654 case WLAN_REASON_##type: return #type
2656 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2658 switch (reason_code) {
2659 case_WLAN(UNSPECIFIED);
2660 case_WLAN(PREV_AUTH_NOT_VALID);
2661 case_WLAN(DEAUTH_LEAVING);
2662 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2663 case_WLAN(DISASSOC_AP_BUSY);
2664 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2665 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2666 case_WLAN(DISASSOC_STA_HAS_LEFT);
2667 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2668 case_WLAN(DISASSOC_BAD_POWER);
2669 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2670 case_WLAN(INVALID_IE);
2671 case_WLAN(MIC_FAILURE);
2672 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2673 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2674 case_WLAN(IE_DIFFERENT);
2675 case_WLAN(INVALID_GROUP_CIPHER);
2676 case_WLAN(INVALID_PAIRWISE_CIPHER);
2677 case_WLAN(INVALID_AKMP);
2678 case_WLAN(UNSUPP_RSN_VERSION);
2679 case_WLAN(INVALID_RSN_IE_CAP);
2680 case_WLAN(IEEE8021X_FAILED);
2681 case_WLAN(CIPHER_SUITE_REJECTED);
2682 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2683 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2684 case_WLAN(DISASSOC_LOW_ACK);
2685 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2686 case_WLAN(QSTA_LEAVE_QBSS);
2687 case_WLAN(QSTA_NOT_USE);
2688 case_WLAN(QSTA_REQUIRE_SETUP);
2689 case_WLAN(QSTA_TIMEOUT);
2690 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2691 case_WLAN(MESH_PEER_CANCELED);
2692 case_WLAN(MESH_MAX_PEERS);
2693 case_WLAN(MESH_CONFIG);
2694 case_WLAN(MESH_CLOSE);
2695 case_WLAN(MESH_MAX_RETRIES);
2696 case_WLAN(MESH_CONFIRM_TIMEOUT);
2697 case_WLAN(MESH_INVALID_GTK);
2698 case_WLAN(MESH_INCONSISTENT_PARAM);
2699 case_WLAN(MESH_INVALID_SECURITY);
2700 case_WLAN(MESH_PATH_ERROR);
2701 case_WLAN(MESH_PATH_NOFORWARD);
2702 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2703 case_WLAN(MAC_EXISTS_IN_MBSS);
2704 case_WLAN(MESH_CHAN_REGULATORY);
2705 case_WLAN(MESH_CHAN);
2706 default: return "<unknown>";
2710 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2711 struct ieee80211_mgmt *mgmt, size_t len)
2713 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2714 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2716 sdata_assert_lock(sdata);
2721 if (ifmgd->associated &&
2722 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2723 const u8 *bssid = ifmgd->associated->bssid;
2725 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2727 ieee80211_get_reason_code_string(reason_code));
2729 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2731 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2736 if (ifmgd->assoc_data &&
2737 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2738 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2741 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2743 ieee80211_get_reason_code_string(reason_code));
2745 ieee80211_destroy_assoc_data(sdata, false);
2747 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2753 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2754 struct ieee80211_mgmt *mgmt, size_t len)
2756 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2759 sdata_assert_lock(sdata);
2764 if (!ifmgd->associated ||
2765 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2768 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2770 sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
2771 mgmt->sa, reason_code);
2773 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2775 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
2778 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2779 u8 *supp_rates, unsigned int supp_rates_len,
2780 u32 *rates, u32 *basic_rates,
2781 bool *have_higher_than_11mbit,
2782 int *min_rate, int *min_rate_index,
2783 int shift, u32 rate_flags)
2787 for (i = 0; i < supp_rates_len; i++) {
2788 int rate = supp_rates[i] & 0x7f;
2789 bool is_basic = !!(supp_rates[i] & 0x80);
2791 if ((rate * 5 * (1 << shift)) > 110)
2792 *have_higher_than_11mbit = true;
2795 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2796 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2798 * Note: Even through the membership selector and the basic
2799 * rate flag share the same bit, they are not exactly
2802 if (!!(supp_rates[i] & 0x80) &&
2803 (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
2806 for (j = 0; j < sband->n_bitrates; j++) {
2807 struct ieee80211_rate *br;
2810 br = &sband->bitrates[j];
2811 if ((rate_flags & br->flags) != rate_flags)
2814 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2815 if (brate == rate) {
2818 *basic_rates |= BIT(j);
2819 if ((rate * 5) < *min_rate) {
2820 *min_rate = rate * 5;
2821 *min_rate_index = j;
2829 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2830 struct cfg80211_bss *cbss,
2831 struct ieee80211_mgmt *mgmt, size_t len)
2833 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2834 struct ieee80211_local *local = sdata->local;
2835 struct ieee80211_supported_band *sband;
2836 struct sta_info *sta;
2838 u16 capab_info, aid;
2839 struct ieee802_11_elems elems;
2840 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2841 const struct cfg80211_bss_ies *bss_ies = NULL;
2842 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2847 /* AssocResp and ReassocResp have identical structure */
2849 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2850 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2852 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2853 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2855 aid &= ~(BIT(15) | BIT(14));
2857 ifmgd->broken_ap = false;
2859 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2860 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2863 ifmgd->broken_ap = true;
2866 pos = mgmt->u.assoc_resp.variable;
2867 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2869 if (!elems.supp_rates) {
2870 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2875 ifmgd->tdls_chan_switch_prohibited =
2876 elems.ext_capab && elems.ext_capab_len >= 5 &&
2877 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2880 * Some APs are erroneously not including some information in their
2881 * (re)association response frames. Try to recover by using the data
2882 * from the beacon or probe response. This seems to afflict mobile
2883 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2884 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2886 if ((assoc_data->wmm && !elems.wmm_param) ||
2887 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2888 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2889 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2890 (!elems.vht_cap_elem || !elems.vht_operation))) {
2891 const struct cfg80211_bss_ies *ies;
2892 struct ieee802_11_elems bss_elems;
2895 ies = rcu_dereference(cbss->ies);
2897 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2903 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2905 if (assoc_data->wmm &&
2906 !elems.wmm_param && bss_elems.wmm_param) {
2907 elems.wmm_param = bss_elems.wmm_param;
2909 "AP bug: WMM param missing from AssocResp\n");
2913 * Also check if we requested HT/VHT, otherwise the AP doesn't
2914 * have to include the IEs in the (re)association response.
2916 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2917 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2918 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2920 "AP bug: HT capability missing from AssocResp\n");
2922 if (!elems.ht_operation && bss_elems.ht_operation &&
2923 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2924 elems.ht_operation = bss_elems.ht_operation;
2926 "AP bug: HT operation missing from AssocResp\n");
2928 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2929 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2930 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2932 "AP bug: VHT capa missing from AssocResp\n");
2934 if (!elems.vht_operation && bss_elems.vht_operation &&
2935 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2936 elems.vht_operation = bss_elems.vht_operation;
2938 "AP bug: VHT operation missing from AssocResp\n");
2943 * We previously checked these in the beacon/probe response, so
2944 * they should be present here. This is just a safety net.
2946 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2947 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2949 "HT AP is missing WMM params or HT capability/operation\n");
2954 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2955 (!elems.vht_cap_elem || !elems.vht_operation)) {
2957 "VHT AP is missing VHT capability/operation\n");
2962 mutex_lock(&sdata->local->sta_mtx);
2964 * station info was already allocated and inserted before
2965 * the association and should be available to us
2967 sta = sta_info_get(sdata, cbss->bssid);
2968 if (WARN_ON(!sta)) {
2969 mutex_unlock(&sdata->local->sta_mtx);
2974 sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
2976 /* Set up internal HT/VHT capabilities */
2977 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
2978 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
2979 elems.ht_cap_elem, sta);
2981 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
2982 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
2983 elems.vht_cap_elem, sta);
2986 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2987 * in their association response, so ignore that data for our own
2988 * configuration. If it changed since the last beacon, we'll get the
2989 * next beacon and update then.
2993 * If an operating mode notification IE is present, override the
2994 * NSS calculation (that would be done in rate_control_rate_init())
2995 * and use the # of streams from that element.
2997 if (elems.opmode_notif &&
2998 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3001 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3002 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3004 sta->sta.rx_nss = nss;
3007 rate_control_rate_init(sta);
3009 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3010 set_sta_flag(sta, WLAN_STA_MFP);
3011 sta->sta.mfp = true;
3013 sta->sta.mfp = false;
3016 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3018 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3019 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3020 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3023 "failed to move station %pM to desired state\n",
3025 WARN_ON(__sta_info_destroy(sta));
3026 mutex_unlock(&sdata->local->sta_mtx);
3031 mutex_unlock(&sdata->local->sta_mtx);
3034 * Always handle WMM once after association regardless
3035 * of the first value the AP uses. Setting -1 here has
3036 * that effect because the AP values is an unsigned
3039 ifmgd->wmm_last_param_set = -1;
3041 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3042 ieee80211_set_wmm_default(sdata, false, false);
3043 } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3044 elems.wmm_param_len)) {
3045 /* still enable QoS since we might have HT/VHT */
3046 ieee80211_set_wmm_default(sdata, false, true);
3047 /* set the disable-WMM flag in this case to disable
3048 * tracking WMM parameter changes in the beacon if
3049 * the parameters weren't actually valid. Doing so
3050 * avoids changing parameters very strangely when
3051 * the AP is going back and forth between valid and
3052 * invalid parameters.
3054 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3056 changed |= BSS_CHANGED_QOS;
3058 /* set AID and assoc capability,
3059 * ieee80211_set_associated() will tell the driver */
3060 bss_conf->aid = aid;
3061 bss_conf->assoc_capability = capab_info;
3062 ieee80211_set_associated(sdata, cbss, changed);
3065 * If we're using 4-addr mode, let the AP know that we're
3066 * doing so, so that it can create the STA VLAN on its side
3068 if (ifmgd->use_4addr)
3069 ieee80211_send_4addr_nullfunc(local, sdata);
3072 * Start timer to probe the connection to the AP now.
3073 * Also start the timer that will detect beacon loss.
3075 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3076 ieee80211_sta_reset_beacon_monitor(sdata);
3084 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3085 struct ieee80211_mgmt *mgmt,
3088 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3089 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3090 u16 capab_info, status_code, aid;
3091 struct ieee802_11_elems elems;
3092 int ac, uapsd_queues = -1;
3095 struct cfg80211_bss *bss;
3096 struct ieee80211_event event = {
3098 .u.mlme.data = ASSOC_EVENT,
3101 sdata_assert_lock(sdata);
3105 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3109 * AssocResp and ReassocResp have identical structure, so process both
3110 * of them in this function.
3116 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
3117 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3118 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3119 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3122 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3123 reassoc ? "Rea" : "A", mgmt->sa,
3124 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3126 pos = mgmt->u.assoc_resp.variable;
3127 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3129 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3130 elems.timeout_int &&
3131 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3133 tu = le32_to_cpu(elems.timeout_int->value);
3134 ms = tu * 1024 / 1000;
3136 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3138 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3139 assoc_data->timeout_started = true;
3140 if (ms > IEEE80211_ASSOC_TIMEOUT)
3141 run_again(sdata, assoc_data->timeout);
3145 bss = assoc_data->bss;
3147 if (status_code != WLAN_STATUS_SUCCESS) {
3148 sdata_info(sdata, "%pM denied association (code=%d)\n",
3149 mgmt->sa, status_code);
3150 ieee80211_destroy_assoc_data(sdata, false);
3151 event.u.mlme.status = MLME_DENIED;
3152 event.u.mlme.reason = status_code;
3153 drv_event_callback(sdata->local, sdata, &event);
3155 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3156 /* oops -- internal error -- send timeout for now */
3157 ieee80211_destroy_assoc_data(sdata, false);
3158 cfg80211_assoc_timeout(sdata->dev, bss);
3161 event.u.mlme.status = MLME_SUCCESS;
3162 drv_event_callback(sdata->local, sdata, &event);
3163 sdata_info(sdata, "associated\n");
3166 * destroy assoc_data afterwards, as otherwise an idle
3167 * recalc after assoc_data is NULL but before associated
3168 * is set can cause the interface to go idle
3170 ieee80211_destroy_assoc_data(sdata, true);
3172 /* get uapsd queues configuration */
3174 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3175 if (sdata->tx_conf[ac].uapsd)
3176 uapsd_queues |= BIT(ac);
3179 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3182 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3183 struct ieee80211_mgmt *mgmt, size_t len,
3184 struct ieee80211_rx_status *rx_status,
3185 struct ieee802_11_elems *elems)
3187 struct ieee80211_local *local = sdata->local;
3188 struct ieee80211_bss *bss;
3189 struct ieee80211_channel *channel;
3191 sdata_assert_lock(sdata);
3193 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3197 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3200 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3201 ieee80211_rx_bss_put(local, bss);
3206 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3207 struct sk_buff *skb)
3209 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3210 struct ieee80211_if_managed *ifmgd;
3211 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3212 size_t baselen, len = skb->len;
3213 struct ieee802_11_elems elems;
3215 ifmgd = &sdata->u.mgd;
3217 sdata_assert_lock(sdata);
3219 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3220 return; /* ignore ProbeResp to foreign address */
3222 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3226 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3229 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3231 if (ifmgd->associated &&
3232 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3233 ieee80211_reset_ap_probe(sdata);
3237 * This is the canonical list of information elements we care about,
3238 * the filter code also gives us all changes to the Microsoft OUI
3239 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3240 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3241 * changes to requested client power.
3243 * We implement beacon filtering in software since that means we can
3244 * avoid processing the frame here and in cfg80211, and userspace
3245 * will not be able to tell whether the hardware supports it or not.
3247 * XXX: This list needs to be dynamic -- userspace needs to be able to
3248 * add items it requires. It also needs to be able to tell us to
3249 * look out for other vendor IEs.
3251 static const u64 care_about_ies =
3252 (1ULL << WLAN_EID_COUNTRY) |
3253 (1ULL << WLAN_EID_ERP_INFO) |
3254 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3255 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3256 (1ULL << WLAN_EID_HT_CAPABILITY) |
3257 (1ULL << WLAN_EID_HT_OPERATION) |
3258 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3260 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3261 struct ieee80211_mgmt *mgmt, size_t len,
3262 struct ieee80211_rx_status *rx_status)
3264 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3265 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3267 struct ieee802_11_elems elems;
3268 struct ieee80211_local *local = sdata->local;
3269 struct ieee80211_chanctx_conf *chanctx_conf;
3270 struct ieee80211_channel *chan;
3271 struct sta_info *sta;
3277 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3279 sdata_assert_lock(sdata);
3281 /* Process beacon from the current BSS */
3282 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3287 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3288 if (!chanctx_conf) {
3293 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3297 chan = chanctx_conf->def.chan;
3300 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3301 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3302 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3303 len - baselen, false, &elems);
3305 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3306 if (elems.tim && !elems.parse_error) {
3307 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3308 ifmgd->dtim_period = tim_ie->dtim_period;
3310 ifmgd->have_beacon = true;
3311 ifmgd->assoc_data->need_beacon = false;
3312 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3313 sdata->vif.bss_conf.sync_tsf =
3314 le64_to_cpu(mgmt->u.beacon.timestamp);
3315 sdata->vif.bss_conf.sync_device_ts =
3316 rx_status->device_timestamp;
3318 sdata->vif.bss_conf.sync_dtim_count =
3319 elems.tim->dtim_count;
3321 sdata->vif.bss_conf.sync_dtim_count = 0;
3323 /* continue assoc process */
3324 ifmgd->assoc_data->timeout = jiffies;
3325 ifmgd->assoc_data->timeout_started = true;
3326 run_again(sdata, ifmgd->assoc_data->timeout);
3330 if (!ifmgd->associated ||
3331 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3333 bssid = ifmgd->associated->bssid;
3335 /* Track average RSSI from the Beacon frames of the current AP */
3336 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3337 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3338 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3339 ifmgd->last_cqm_event_signal = 0;
3340 ifmgd->count_beacon_signal = 1;
3341 ifmgd->last_ave_beacon_signal = 0;
3343 ifmgd->count_beacon_signal++;
3346 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3348 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3349 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3350 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3351 int last_sig = ifmgd->last_ave_beacon_signal;
3352 struct ieee80211_event event = {
3357 * if signal crosses either of the boundaries, invoke callback
3358 * with appropriate parameters
3360 if (sig > ifmgd->rssi_max_thold &&
3361 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3362 ifmgd->last_ave_beacon_signal = sig;
3363 event.u.rssi.data = RSSI_EVENT_HIGH;
3364 drv_event_callback(local, sdata, &event);
3365 } else if (sig < ifmgd->rssi_min_thold &&
3366 (last_sig >= ifmgd->rssi_max_thold ||
3368 ifmgd->last_ave_beacon_signal = sig;
3369 event.u.rssi.data = RSSI_EVENT_LOW;
3370 drv_event_callback(local, sdata, &event);
3374 if (bss_conf->cqm_rssi_thold &&
3375 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3376 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3377 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3378 int last_event = ifmgd->last_cqm_event_signal;
3379 int thold = bss_conf->cqm_rssi_thold;
3380 int hyst = bss_conf->cqm_rssi_hyst;
3383 (last_event == 0 || sig < last_event - hyst)) {
3384 ifmgd->last_cqm_event_signal = sig;
3385 ieee80211_cqm_rssi_notify(
3387 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3389 } else if (sig > thold &&
3390 (last_event == 0 || sig > last_event + hyst)) {
3391 ifmgd->last_cqm_event_signal = sig;
3392 ieee80211_cqm_rssi_notify(
3394 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3399 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3400 mlme_dbg_ratelimited(sdata,
3401 "cancelling AP probe due to a received beacon\n");
3402 ieee80211_reset_ap_probe(sdata);
3406 * Push the beacon loss detection into the future since
3407 * we are processing a beacon from the AP just now.
3409 ieee80211_sta_reset_beacon_monitor(sdata);
3411 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3412 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3413 len - baselen, false, &elems,
3414 care_about_ies, ncrc);
3416 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
3417 ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
3418 if (local->hw.conf.dynamic_ps_timeout > 0) {
3419 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3420 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3421 ieee80211_hw_config(local,
3422 IEEE80211_CONF_CHANGE_PS);
3424 ieee80211_send_nullfunc(local, sdata, false);
3425 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3426 local->pspolling = true;
3429 * Here is assumed that the driver will be
3430 * able to send ps-poll frame and receive a
3431 * response even though power save mode is
3432 * enabled, but some drivers might require
3433 * to disable power save here. This needs
3434 * to be investigated.
3436 ieee80211_send_pspoll(local, sdata);
3440 if (sdata->vif.p2p ||
3441 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
3442 struct ieee80211_p2p_noa_attr noa = {};
3445 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3447 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3448 (u8 *) &noa, sizeof(noa));
3450 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3451 /* valid noa_attr and index changed */
3452 sdata->u.mgd.p2p_noa_index = noa.index;
3453 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3454 changed |= BSS_CHANGED_P2P_PS;
3456 * make sure we update all information, the CRC
3457 * mechanism doesn't look at P2P attributes.
3459 ifmgd->beacon_crc_valid = false;
3461 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3462 /* noa_attr not found and we had valid noa_attr before */
3463 sdata->u.mgd.p2p_noa_index = -1;
3464 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3465 changed |= BSS_CHANGED_P2P_PS;
3466 ifmgd->beacon_crc_valid = false;
3470 if (ifmgd->csa_waiting_bcn)
3471 ieee80211_chswitch_post_beacon(sdata);
3474 * Update beacon timing and dtim count on every beacon appearance. This
3475 * will allow the driver to use the most updated values. Do it before
3476 * comparing this one with last received beacon.
3477 * IMPORTANT: These parameters would possibly be out of sync by the time
3478 * the driver will use them. The synchronized view is currently
3479 * guaranteed only in certain callbacks.
3481 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3482 sdata->vif.bss_conf.sync_tsf =
3483 le64_to_cpu(mgmt->u.beacon.timestamp);
3484 sdata->vif.bss_conf.sync_device_ts =
3485 rx_status->device_timestamp;
3487 sdata->vif.bss_conf.sync_dtim_count =
3488 elems.tim->dtim_count;
3490 sdata->vif.bss_conf.sync_dtim_count = 0;
3493 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3495 ifmgd->beacon_crc = ncrc;
3496 ifmgd->beacon_crc_valid = true;
3498 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3500 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3501 rx_status->device_timestamp,
3504 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3505 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3506 elems.wmm_param_len))
3507 changed |= BSS_CHANGED_QOS;
3510 * If we haven't had a beacon before, tell the driver about the
3511 * DTIM period (and beacon timing if desired) now.
3513 if (!ifmgd->have_beacon) {
3514 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3516 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3518 bss_conf->dtim_period = 1;
3520 changed |= BSS_CHANGED_BEACON_INFO;
3521 ifmgd->have_beacon = true;
3523 mutex_lock(&local->iflist_mtx);
3524 ieee80211_recalc_ps(local);
3525 mutex_unlock(&local->iflist_mtx);
3527 ieee80211_recalc_ps_vif(sdata);
3530 if (elems.erp_info) {
3532 erp_value = elems.erp_info[0];
3536 changed |= ieee80211_handle_bss_capability(sdata,
3537 le16_to_cpu(mgmt->u.beacon.capab_info),
3538 erp_valid, erp_value);
3540 mutex_lock(&local->sta_mtx);
3541 sta = sta_info_get(sdata, bssid);
3543 if (ieee80211_config_bw(sdata, sta,
3544 elems.ht_cap_elem, elems.ht_operation,
3545 elems.vht_operation, bssid, &changed)) {
3546 mutex_unlock(&local->sta_mtx);
3547 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3548 WLAN_REASON_DEAUTH_LEAVING,
3550 ieee80211_report_disconnect(sdata, deauth_buf,
3551 sizeof(deauth_buf), true,
3552 WLAN_REASON_DEAUTH_LEAVING);
3556 if (sta && elems.opmode_notif)
3557 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3559 mutex_unlock(&local->sta_mtx);
3561 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3563 elems.country_elem_len,
3564 elems.pwr_constr_elem,
3565 elems.cisco_dtpc_elem);
3567 ieee80211_bss_info_change_notify(sdata, changed);
3570 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3571 struct sk_buff *skb)
3573 struct ieee80211_rx_status *rx_status;
3574 struct ieee80211_mgmt *mgmt;
3576 struct ieee802_11_elems elems;
3579 rx_status = (struct ieee80211_rx_status *) skb->cb;
3580 mgmt = (struct ieee80211_mgmt *) skb->data;
3581 fc = le16_to_cpu(mgmt->frame_control);
3585 switch (fc & IEEE80211_FCTL_STYPE) {
3586 case IEEE80211_STYPE_BEACON:
3587 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3589 case IEEE80211_STYPE_PROBE_RESP:
3590 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3592 case IEEE80211_STYPE_AUTH:
3593 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3595 case IEEE80211_STYPE_DEAUTH:
3596 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3598 case IEEE80211_STYPE_DISASSOC:
3599 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3601 case IEEE80211_STYPE_ASSOC_RESP:
3602 case IEEE80211_STYPE_REASSOC_RESP:
3603 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3605 case IEEE80211_STYPE_ACTION:
3606 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3607 ies_len = skb->len -
3608 offsetof(struct ieee80211_mgmt,
3609 u.action.u.chan_switch.variable);
3614 ieee802_11_parse_elems(
3615 mgmt->u.action.u.chan_switch.variable,
3616 ies_len, true, &elems);
3618 if (elems.parse_error)
3621 ieee80211_sta_process_chanswitch(sdata,
3623 rx_status->device_timestamp,
3625 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3626 ies_len = skb->len -
3627 offsetof(struct ieee80211_mgmt,
3628 u.action.u.ext_chan_switch.variable);
3633 ieee802_11_parse_elems(
3634 mgmt->u.action.u.ext_chan_switch.variable,
3635 ies_len, true, &elems);
3637 if (elems.parse_error)
3640 /* for the handling code pretend this was also an IE */
3641 elems.ext_chansw_ie =
3642 &mgmt->u.action.u.ext_chan_switch.data;
3644 ieee80211_sta_process_chanswitch(sdata,
3646 rx_status->device_timestamp,
3651 sdata_unlock(sdata);
3654 static void ieee80211_sta_timer(unsigned long data)
3656 struct ieee80211_sub_if_data *sdata =
3657 (struct ieee80211_sub_if_data *) data;
3659 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3662 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3663 u8 *bssid, u8 reason, bool tx)
3665 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3667 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3670 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
3674 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
3676 struct ieee80211_local *local = sdata->local;
3677 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3678 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3683 sdata_assert_lock(sdata);
3685 if (WARN_ON_ONCE(!auth_data))
3690 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3691 sdata_info(sdata, "authentication with %pM timed out\n",
3692 auth_data->bss->bssid);
3695 * Most likely AP is not in the range so remove the
3696 * bss struct for that AP.
3698 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3703 drv_mgd_prepare_tx(local, sdata);
3705 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3706 auth_data->bss->bssid, auth_data->tries,
3707 IEEE80211_AUTH_MAX_TRIES);
3709 auth_data->expected_transaction = 2;
3711 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3712 trans = auth_data->sae_trans;
3713 status = auth_data->sae_status;
3714 auth_data->expected_transaction = trans;
3717 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3718 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3719 IEEE80211_TX_INTFL_MLME_CONN_TX;
3721 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3722 auth_data->data, auth_data->data_len,
3723 auth_data->bss->bssid,
3724 auth_data->bss->bssid, NULL, 0, 0,
3727 if (tx_flags == 0) {
3728 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3729 auth_data->timeout_started = true;
3730 run_again(sdata, auth_data->timeout);
3732 auth_data->timeout =
3733 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3734 auth_data->timeout_started = true;
3735 run_again(sdata, auth_data->timeout);
3741 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3743 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3744 struct ieee80211_local *local = sdata->local;
3746 sdata_assert_lock(sdata);
3748 assoc_data->tries++;
3749 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3750 sdata_info(sdata, "association with %pM timed out\n",
3751 assoc_data->bss->bssid);
3754 * Most likely AP is not in the range so remove the
3755 * bss struct for that AP.
3757 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3762 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3763 assoc_data->bss->bssid, assoc_data->tries,
3764 IEEE80211_ASSOC_MAX_TRIES);
3765 ieee80211_send_assoc(sdata);
3767 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3768 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3769 assoc_data->timeout_started = true;
3770 run_again(sdata, assoc_data->timeout);
3772 assoc_data->timeout =
3773 round_jiffies_up(jiffies +
3774 IEEE80211_ASSOC_TIMEOUT_LONG);
3775 assoc_data->timeout_started = true;
3776 run_again(sdata, assoc_data->timeout);
3782 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3783 __le16 fc, bool acked)
3785 struct ieee80211_local *local = sdata->local;
3787 sdata->u.mgd.status_fc = fc;
3788 sdata->u.mgd.status_acked = acked;
3789 sdata->u.mgd.status_received = true;
3791 ieee80211_queue_work(&local->hw, &sdata->work);
3794 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3796 struct ieee80211_local *local = sdata->local;
3797 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3801 if (ifmgd->status_received) {
3802 __le16 fc = ifmgd->status_fc;
3803 bool status_acked = ifmgd->status_acked;
3805 ifmgd->status_received = false;
3806 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
3808 ifmgd->auth_data->timeout =
3809 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3810 run_again(sdata, ifmgd->auth_data->timeout);
3812 ifmgd->auth_data->timeout = jiffies - 1;
3814 ifmgd->auth_data->timeout_started = true;
3815 } else if (ifmgd->assoc_data &&
3816 (ieee80211_is_assoc_req(fc) ||
3817 ieee80211_is_reassoc_req(fc))) {
3819 ifmgd->assoc_data->timeout =
3820 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3821 run_again(sdata, ifmgd->assoc_data->timeout);
3823 ifmgd->assoc_data->timeout = jiffies - 1;
3825 ifmgd->assoc_data->timeout_started = true;
3829 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3830 time_after(jiffies, ifmgd->auth_data->timeout)) {
3831 if (ifmgd->auth_data->done) {
3833 * ok ... we waited for assoc but userspace didn't,
3834 * so let's just kill the auth data
3836 ieee80211_destroy_auth_data(sdata, false);
3837 } else if (ieee80211_auth(sdata)) {
3839 struct ieee80211_event event = {
3841 .u.mlme.data = AUTH_EVENT,
3842 .u.mlme.status = MLME_TIMEOUT,
3845 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3847 ieee80211_destroy_auth_data(sdata, false);
3849 cfg80211_auth_timeout(sdata->dev, bssid);
3850 drv_event_callback(sdata->local, sdata, &event);
3852 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3853 run_again(sdata, ifmgd->auth_data->timeout);
3855 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3856 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3857 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3858 ieee80211_do_assoc(sdata)) {
3859 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3860 struct ieee80211_event event = {
3862 .u.mlme.data = ASSOC_EVENT,
3863 .u.mlme.status = MLME_TIMEOUT,
3866 ieee80211_destroy_assoc_data(sdata, false);
3867 cfg80211_assoc_timeout(sdata->dev, bss);
3868 drv_event_callback(sdata->local, sdata, &event);
3870 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3871 run_again(sdata, ifmgd->assoc_data->timeout);
3873 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3874 ifmgd->associated) {
3878 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3880 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3881 max_tries = max_nullfunc_tries;
3883 max_tries = max_probe_tries;
3885 /* ACK received for nullfunc probing frame */
3886 if (!ifmgd->probe_send_count)
3887 ieee80211_reset_ap_probe(sdata);
3888 else if (ifmgd->nullfunc_failed) {
3889 if (ifmgd->probe_send_count < max_tries) {
3891 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3892 bssid, ifmgd->probe_send_count,
3894 ieee80211_mgd_probe_ap_send(sdata);
3897 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3899 ieee80211_sta_connection_lost(sdata, bssid,
3900 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3903 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3904 run_again(sdata, ifmgd->probe_timeout);
3905 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3907 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3908 bssid, probe_wait_ms);
3909 ieee80211_sta_connection_lost(sdata, bssid,
3910 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3911 } else if (ifmgd->probe_send_count < max_tries) {
3913 "No probe response from AP %pM after %dms, try %d/%i\n",
3914 bssid, probe_wait_ms,
3915 ifmgd->probe_send_count, max_tries);
3916 ieee80211_mgd_probe_ap_send(sdata);
3919 * We actually lost the connection ... or did we?
3922 wiphy_debug(local->hw.wiphy,
3923 "%s: No probe response from AP %pM"
3924 " after %dms, disconnecting.\n",
3926 bssid, probe_wait_ms);
3928 ieee80211_sta_connection_lost(sdata, bssid,
3929 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3933 sdata_unlock(sdata);
3936 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
3938 struct ieee80211_sub_if_data *sdata =
3939 (struct ieee80211_sub_if_data *) data;
3940 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3942 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3945 sdata->u.mgd.connection_loss = false;
3946 ieee80211_queue_work(&sdata->local->hw,
3947 &sdata->u.mgd.beacon_connection_loss_work);
3950 static void ieee80211_sta_conn_mon_timer(unsigned long data)
3952 struct ieee80211_sub_if_data *sdata =
3953 (struct ieee80211_sub_if_data *) data;
3954 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3955 struct ieee80211_local *local = sdata->local;
3957 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3960 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
3963 static void ieee80211_sta_monitor_work(struct work_struct *work)
3965 struct ieee80211_sub_if_data *sdata =
3966 container_of(work, struct ieee80211_sub_if_data,
3967 u.mgd.monitor_work);
3969 ieee80211_mgd_probe_ap(sdata, false);
3972 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
3974 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
3975 __ieee80211_stop_poll(sdata);
3977 /* let's probe the connection once */
3978 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
3979 ieee80211_queue_work(&sdata->local->hw,
3980 &sdata->u.mgd.monitor_work);
3981 /* and do all the other regular work too */
3982 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3987 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
3989 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3990 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3994 if (ifmgd->auth_data || ifmgd->assoc_data) {
3995 const u8 *bssid = ifmgd->auth_data ?
3996 ifmgd->auth_data->bss->bssid :
3997 ifmgd->assoc_data->bss->bssid;
4000 * If we are trying to authenticate / associate while suspending,
4001 * cfg80211 won't know and won't actually abort those attempts,
4002 * thus we need to do that ourselves.
4004 ieee80211_send_deauth_disassoc(sdata, bssid,
4005 IEEE80211_STYPE_DEAUTH,
4006 WLAN_REASON_DEAUTH_LEAVING,
4008 if (ifmgd->assoc_data)
4009 ieee80211_destroy_assoc_data(sdata, false);
4010 if (ifmgd->auth_data)
4011 ieee80211_destroy_auth_data(sdata, false);
4012 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4013 IEEE80211_DEAUTH_FRAME_LEN);
4016 /* This is a bit of a hack - we should find a better and more generic
4017 * solution to this. Normally when suspending, cfg80211 will in fact
4018 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4019 * auth (not so important) or assoc (this is the problem) process.
4021 * As a consequence, it can happen that we are in the process of both
4022 * associating and suspending, and receive an association response
4023 * after cfg80211 has checked if it needs to disconnect, but before
4024 * we actually set the flag to drop incoming frames. This will then
4025 * cause the workqueue flush to process the association response in
4026 * the suspend, resulting in a successful association just before it
4027 * tries to remove the interface from the driver, which now though
4028 * has a channel context assigned ... this results in issues.
4030 * To work around this (for now) simply deauth here again if we're
4033 if (ifmgd->associated && !sdata->local->wowlan) {
4035 struct cfg80211_deauth_request req = {
4036 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4040 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4041 ieee80211_mgd_deauth(sdata, &req);
4044 sdata_unlock(sdata);
4047 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4049 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4052 if (!ifmgd->associated) {
4053 sdata_unlock(sdata);
4057 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4058 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4059 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4060 ieee80211_sta_connection_lost(sdata,
4061 ifmgd->associated->bssid,
4062 WLAN_REASON_UNSPECIFIED,
4064 sdata_unlock(sdata);
4067 sdata_unlock(sdata);
4071 /* interface setup */
4072 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4074 struct ieee80211_if_managed *ifmgd;
4076 ifmgd = &sdata->u.mgd;
4077 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4078 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4079 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4080 ieee80211_beacon_connection_loss_work);
4081 INIT_WORK(&ifmgd->csa_connection_drop_work,
4082 ieee80211_csa_connection_drop_work);
4083 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4084 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4085 ieee80211_tdls_peer_del_work);
4086 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
4087 (unsigned long) sdata);
4088 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
4089 (unsigned long) sdata);
4090 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
4091 (unsigned long) sdata);
4092 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
4093 (unsigned long) sdata);
4094 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4095 ieee80211_sta_handle_tspec_ac_params_wk);
4098 ifmgd->powersave = sdata->wdev.ps;
4099 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4100 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4101 ifmgd->p2p_noa_index = -1;
4103 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4104 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4106 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4108 /* Setup TDLS data */
4109 spin_lock_init(&ifmgd->teardown_lock);
4110 ifmgd->teardown_skb = NULL;
4111 ifmgd->orig_teardown_skb = NULL;
4114 /* scan finished notification */
4115 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4117 struct ieee80211_sub_if_data *sdata;
4119 /* Restart STA timers */
4121 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4122 if (ieee80211_sdata_running(sdata))
4123 ieee80211_restart_sta_timer(sdata);
4128 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4129 struct cfg80211_bss *cbss)
4131 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4132 const u8 *ht_cap_ie, *vht_cap_ie;
4133 const struct ieee80211_ht_cap *ht_cap;
4134 const struct ieee80211_vht_cap *vht_cap;
4137 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4140 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4141 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4142 ht_cap = (void *)(ht_cap_ie + 2);
4143 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4145 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4146 * "Tx Unequal Modulation Supported" fields.
4150 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4153 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4154 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4158 vht_cap = (void *)(vht_cap_ie + 2);
4159 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4160 for (nss = 8; nss > 0; nss--) {
4161 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4162 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4165 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4166 chains = max(chains, nss);
4172 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4173 struct cfg80211_bss *cbss)
4175 struct ieee80211_local *local = sdata->local;
4176 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4177 const struct ieee80211_ht_cap *ht_cap = NULL;
4178 const struct ieee80211_ht_operation *ht_oper = NULL;
4179 const struct ieee80211_vht_operation *vht_oper = NULL;
4180 struct ieee80211_supported_band *sband;
4181 struct cfg80211_chan_def chandef;
4186 sband = local->hw.wiphy->bands[cbss->channel->band];
4188 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4189 IEEE80211_STA_DISABLE_80P80MHZ |
4190 IEEE80211_STA_DISABLE_160MHZ);
4194 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4195 sband->ht_cap.ht_supported) {
4196 const u8 *ht_oper_ie, *ht_cap_ie;
4198 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4199 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4200 ht_oper = (void *)(ht_oper_ie + 2);
4202 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4203 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4204 ht_cap = (void *)(ht_cap_ie + 2);
4207 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4212 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4213 sband->vht_cap.vht_supported) {
4214 const u8 *vht_oper_ie, *vht_cap;
4216 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4217 WLAN_EID_VHT_OPERATION);
4218 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4219 vht_oper = (void *)(vht_oper_ie + 2);
4220 if (vht_oper && !ht_oper) {
4223 "AP advertised VHT without HT, disabling both\n");
4224 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4225 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4228 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4229 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4230 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4235 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4237 for (i = 0; i < sband->n_channels; i++) {
4238 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4239 IEEE80211_CHAN_NO_80MHZ))
4247 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4249 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4251 ht_cap, ht_oper, vht_oper,
4254 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4259 /* will change later if needed */
4260 sdata->smps_mode = IEEE80211_SMPS_OFF;
4262 mutex_lock(&local->mtx);
4264 * If this fails (possibly due to channel context sharing
4265 * on incompatible channels, e.g. 80+80 and 160 sharing the
4266 * same control channel) try to use a smaller bandwidth.
4268 ret = ieee80211_vif_use_channel(sdata, &chandef,
4269 IEEE80211_CHANCTX_SHARED);
4271 /* don't downgrade for 5 and 10 MHz channels, though. */
4272 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4273 chandef.width == NL80211_CHAN_WIDTH_10)
4276 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4277 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4278 ret = ieee80211_vif_use_channel(sdata, &chandef,
4279 IEEE80211_CHANCTX_SHARED);
4282 mutex_unlock(&local->mtx);
4286 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4287 struct cfg80211_bss *cbss, bool assoc,
4290 struct ieee80211_local *local = sdata->local;
4291 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4292 struct ieee80211_bss *bss = (void *)cbss->priv;
4293 struct sta_info *new_sta = NULL;
4294 struct ieee80211_supported_band *sband;
4295 bool have_sta = false;
4298 sband = local->hw.wiphy->bands[cbss->channel->band];
4300 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4305 have_sta = sta_info_get(sdata, cbss->bssid);
4310 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4315 if (new_sta || override) {
4316 err = ieee80211_prep_channel(sdata, cbss);
4319 sta_info_free(local, new_sta);
4325 u32 rates = 0, basic_rates = 0;
4326 bool have_higher_than_11mbit;
4327 int min_rate = INT_MAX, min_rate_index = -1;
4328 struct ieee80211_chanctx_conf *chanctx_conf;
4329 const struct cfg80211_bss_ies *ies;
4330 int shift = ieee80211_vif_get_shift(&sdata->vif);
4334 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4335 if (WARN_ON(!chanctx_conf)) {
4337 sta_info_free(local, new_sta);
4340 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4343 ieee80211_get_rates(sband, bss->supp_rates,
4344 bss->supp_rates_len,
4345 &rates, &basic_rates,
4346 &have_higher_than_11mbit,
4347 &min_rate, &min_rate_index,
4351 * This used to be a workaround for basic rates missing
4352 * in the association response frame. Now that we no
4353 * longer use the basic rates from there, it probably
4354 * doesn't happen any more, but keep the workaround so
4355 * in case some *other* APs are buggy in different ways
4356 * we can connect -- with a warning.
4358 if (!basic_rates && min_rate_index >= 0) {
4360 "No basic rates, using min rate instead\n");
4361 basic_rates = BIT(min_rate_index);
4364 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4365 sdata->vif.bss_conf.basic_rates = basic_rates;
4367 /* cf. IEEE 802.11 9.2.12 */
4368 if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
4369 have_higher_than_11mbit)
4370 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4372 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4374 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4376 /* set timing information */
4377 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4379 ies = rcu_dereference(cbss->beacon_ies);
4383 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4384 sdata->vif.bss_conf.sync_device_ts =
4385 bss->device_ts_beacon;
4386 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4387 ies->data, ies->len);
4388 if (tim_ie && tim_ie[1] >= 2)
4389 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4391 sdata->vif.bss_conf.sync_dtim_count = 0;
4392 } else if (!ieee80211_hw_check(&sdata->local->hw,
4393 TIMING_BEACON_ONLY)) {
4394 ies = rcu_dereference(cbss->proberesp_ies);
4395 /* must be non-NULL since beacon IEs were NULL */
4396 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4397 sdata->vif.bss_conf.sync_device_ts =
4398 bss->device_ts_presp;
4399 sdata->vif.bss_conf.sync_dtim_count = 0;
4401 sdata->vif.bss_conf.sync_tsf = 0;
4402 sdata->vif.bss_conf.sync_device_ts = 0;
4403 sdata->vif.bss_conf.sync_dtim_count = 0;
4407 /* tell driver about BSSID, basic rates and timing */
4408 ieee80211_bss_info_change_notify(sdata,
4409 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4410 BSS_CHANGED_BEACON_INT);
4413 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4415 err = sta_info_insert(new_sta);
4419 "failed to insert STA entry for the AP (error %d)\n",
4424 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4426 /* Cancel scan to ensure that nothing interferes with connection */
4427 if (local->scanning)
4428 ieee80211_scan_cancel(local);
4434 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4435 struct cfg80211_auth_request *req)
4437 struct ieee80211_local *local = sdata->local;
4438 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4439 struct ieee80211_mgd_auth_data *auth_data;
4443 /* prepare auth data structure */
4445 switch (req->auth_type) {
4446 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4447 auth_alg = WLAN_AUTH_OPEN;
4449 case NL80211_AUTHTYPE_SHARED_KEY:
4450 if (IS_ERR(local->wep_tx_tfm))
4452 auth_alg = WLAN_AUTH_SHARED_KEY;
4454 case NL80211_AUTHTYPE_FT:
4455 auth_alg = WLAN_AUTH_FT;
4457 case NL80211_AUTHTYPE_NETWORK_EAP:
4458 auth_alg = WLAN_AUTH_LEAP;
4460 case NL80211_AUTHTYPE_SAE:
4461 auth_alg = WLAN_AUTH_SAE;
4467 auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
4468 req->ie_len, GFP_KERNEL);
4472 auth_data->bss = req->bss;
4474 if (req->sae_data_len >= 4) {
4475 __le16 *pos = (__le16 *) req->sae_data;
4476 auth_data->sae_trans = le16_to_cpu(pos[0]);
4477 auth_data->sae_status = le16_to_cpu(pos[1]);
4478 memcpy(auth_data->data, req->sae_data + 4,
4479 req->sae_data_len - 4);
4480 auth_data->data_len += req->sae_data_len - 4;
4483 if (req->ie && req->ie_len) {
4484 memcpy(&auth_data->data[auth_data->data_len],
4485 req->ie, req->ie_len);
4486 auth_data->data_len += req->ie_len;
4489 if (req->key && req->key_len) {
4490 auth_data->key_len = req->key_len;
4491 auth_data->key_idx = req->key_idx;
4492 memcpy(auth_data->key, req->key, req->key_len);
4495 auth_data->algorithm = auth_alg;
4497 /* try to authenticate/probe */
4499 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4500 ifmgd->assoc_data) {
4505 if (ifmgd->auth_data)
4506 ieee80211_destroy_auth_data(sdata, false);
4508 /* prep auth_data so we don't go into idle on disassoc */
4509 ifmgd->auth_data = auth_data;
4511 if (ifmgd->associated) {
4512 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4514 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4515 WLAN_REASON_UNSPECIFIED,
4518 ieee80211_report_disconnect(sdata, frame_buf,
4519 sizeof(frame_buf), true,
4520 WLAN_REASON_UNSPECIFIED);
4523 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4525 err = ieee80211_prep_connection(sdata, req->bss, false, false);
4529 err = ieee80211_auth(sdata);
4531 sta_info_destroy_addr(sdata, req->bss->bssid);
4535 /* hold our own reference */
4536 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4540 eth_zero_addr(ifmgd->bssid);
4541 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4542 ifmgd->auth_data = NULL;
4543 mutex_lock(&sdata->local->mtx);
4544 ieee80211_vif_release_channel(sdata);
4545 mutex_unlock(&sdata->local->mtx);
4551 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4552 struct cfg80211_assoc_request *req)
4554 struct ieee80211_local *local = sdata->local;
4555 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4556 struct ieee80211_bss *bss = (void *)req->bss->priv;
4557 struct ieee80211_mgd_assoc_data *assoc_data;
4558 const struct cfg80211_bss_ies *beacon_ies;
4559 struct ieee80211_supported_band *sband;
4560 const u8 *ssidie, *ht_ie, *vht_ie;
4562 bool override = false;
4564 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4569 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4575 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4576 assoc_data->ssid_len = ssidie[1];
4579 if (ifmgd->associated) {
4580 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4582 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4583 WLAN_REASON_UNSPECIFIED,
4586 ieee80211_report_disconnect(sdata, frame_buf,
4587 sizeof(frame_buf), true,
4588 WLAN_REASON_UNSPECIFIED);
4591 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4596 if (ifmgd->assoc_data) {
4601 if (ifmgd->auth_data) {
4604 /* keep sta info, bssid if matching */
4605 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4606 ieee80211_destroy_auth_data(sdata, match);
4609 /* prepare assoc data */
4611 ifmgd->beacon_crc_valid = false;
4613 assoc_data->wmm = bss->wmm_used &&
4614 (local->hw.queues >= IEEE80211_NUM_ACS);
4617 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4618 * We still associate in non-HT mode (11a/b/g) if any one of these
4619 * ciphers is configured as pairwise.
4620 * We can set this to true for non-11n hardware, that'll be checked
4621 * separately along with the peer capabilities.
4623 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4624 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4625 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4626 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4627 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4628 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4629 netdev_info(sdata->dev,
4630 "disabling HT/VHT due to WEP/TKIP use\n");
4634 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4635 sband = local->hw.wiphy->bands[req->bss->channel->band];
4636 if (!sband->ht_cap.ht_supported ||
4637 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4638 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4639 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4640 if (!bss->wmm_used &&
4641 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4642 netdev_info(sdata->dev,
4643 "disabling HT as WMM/QoS is not supported by the AP\n");
4646 /* disable VHT if we don't support it or the AP doesn't use WMM */
4647 if (!sband->vht_cap.vht_supported ||
4648 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4649 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4650 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4651 if (!bss->wmm_used &&
4652 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4653 netdev_info(sdata->dev,
4654 "disabling VHT as WMM/QoS is not supported by the AP\n");
4657 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4658 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4659 sizeof(ifmgd->ht_capa_mask));
4661 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4662 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4663 sizeof(ifmgd->vht_capa_mask));
4665 if (req->ie && req->ie_len) {
4666 memcpy(assoc_data->ie, req->ie, req->ie_len);
4667 assoc_data->ie_len = req->ie_len;
4670 assoc_data->bss = req->bss;
4672 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4673 if (ifmgd->powersave)
4674 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4676 sdata->smps_mode = IEEE80211_SMPS_OFF;
4678 sdata->smps_mode = ifmgd->req_smps;
4680 assoc_data->capability = req->bss->capability;
4681 assoc_data->supp_rates = bss->supp_rates;
4682 assoc_data->supp_rates_len = bss->supp_rates_len;
4685 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4686 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4687 assoc_data->ap_ht_param =
4688 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4690 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4691 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4692 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4693 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4694 sizeof(struct ieee80211_vht_cap));
4696 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4699 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4700 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
4701 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4702 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4704 if (bss->wmm_used && bss->uapsd_supported &&
4705 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4706 assoc_data->uapsd = true;
4707 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4709 assoc_data->uapsd = false;
4710 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4713 if (req->prev_bssid)
4714 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4717 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4718 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4720 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4721 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4724 if (req->flags & ASSOC_REQ_USE_RRM)
4725 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4727 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4729 if (req->crypto.control_port)
4730 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4732 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4734 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4735 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4736 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4739 /* kick off associate process */
4741 ifmgd->assoc_data = assoc_data;
4742 ifmgd->dtim_period = 0;
4743 ifmgd->have_beacon = false;
4745 /* override HT/VHT configuration only if the AP and we support it */
4746 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
4747 struct ieee80211_sta_ht_cap sta_ht_cap;
4749 if (req->flags & ASSOC_REQ_DISABLE_HT)
4752 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4753 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4755 /* check for 40 MHz disable override */
4756 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
4757 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
4758 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
4761 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4762 req->flags & ASSOC_REQ_DISABLE_VHT)
4766 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4767 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4768 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4771 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4772 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4774 err = ieee80211_prep_connection(sdata, req->bss, true, override);
4779 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4781 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
4784 * Wait up to one beacon interval ...
4785 * should this be more if we miss one?
4787 sdata_info(sdata, "waiting for beacon from %pM\n",
4789 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4790 assoc_data->timeout_started = true;
4791 assoc_data->need_beacon = true;
4792 } else if (beacon_ies) {
4793 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4798 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4799 const struct ieee80211_tim_ie *tim;
4800 tim = (void *)(tim_ie + 2);
4801 ifmgd->dtim_period = tim->dtim_period;
4802 dtim_count = tim->dtim_count;
4804 ifmgd->have_beacon = true;
4805 assoc_data->timeout = jiffies;
4806 assoc_data->timeout_started = true;
4808 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4809 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4810 sdata->vif.bss_conf.sync_device_ts =
4811 bss->device_ts_beacon;
4812 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4815 assoc_data->timeout = jiffies;
4816 assoc_data->timeout_started = true;
4820 run_again(sdata, assoc_data->timeout);
4822 if (bss->corrupt_data) {
4823 char *corrupt_type = "data";
4824 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4825 if (bss->corrupt_data &
4826 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4827 corrupt_type = "beacon and probe response";
4829 corrupt_type = "beacon";
4830 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4831 corrupt_type = "probe response";
4832 sdata_info(sdata, "associating with AP with corrupt %s\n",
4838 eth_zero_addr(ifmgd->bssid);
4839 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4840 ifmgd->assoc_data = NULL;
4846 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4847 struct cfg80211_deauth_request *req)
4849 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4850 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4851 bool tx = !req->local_state_change;
4853 if (ifmgd->auth_data &&
4854 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4856 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4857 req->bssid, req->reason_code,
4858 ieee80211_get_reason_code_string(req->reason_code));
4860 drv_mgd_prepare_tx(sdata->local, sdata);
4861 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4862 IEEE80211_STYPE_DEAUTH,
4863 req->reason_code, tx,
4865 ieee80211_destroy_auth_data(sdata, false);
4866 ieee80211_report_disconnect(sdata, frame_buf,
4867 sizeof(frame_buf), true,
4873 if (ifmgd->assoc_data &&
4874 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
4876 "aborting association with %pM by local choice (Reason: %u=%s)\n",
4877 req->bssid, req->reason_code,
4878 ieee80211_get_reason_code_string(req->reason_code));
4880 drv_mgd_prepare_tx(sdata->local, sdata);
4881 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4882 IEEE80211_STYPE_DEAUTH,
4883 req->reason_code, tx,
4885 ieee80211_destroy_assoc_data(sdata, false);
4886 ieee80211_report_disconnect(sdata, frame_buf,
4887 sizeof(frame_buf), true,
4892 if (ifmgd->associated &&
4893 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4895 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4896 req->bssid, req->reason_code,
4897 ieee80211_get_reason_code_string(req->reason_code));
4899 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4900 req->reason_code, tx, frame_buf);
4901 ieee80211_report_disconnect(sdata, frame_buf,
4902 sizeof(frame_buf), true,
4910 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
4911 struct cfg80211_disassoc_request *req)
4913 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4915 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4918 * cfg80211 should catch this ... but it's racy since
4919 * we can receive a disassoc frame, process it, hand it
4920 * to cfg80211 while that's in a locked section already
4921 * trying to tell us that the user wants to disconnect.
4923 if (ifmgd->associated != req->bss)
4927 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4928 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
4930 memcpy(bssid, req->bss->bssid, ETH_ALEN);
4931 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
4932 req->reason_code, !req->local_state_change,
4935 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
4941 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
4943 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4946 * Make sure some work items will not run after this,
4947 * they will not do anything but might not have been
4948 * cancelled when disconnecting.
4950 cancel_work_sync(&ifmgd->monitor_work);
4951 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
4952 cancel_work_sync(&ifmgd->request_smps_work);
4953 cancel_work_sync(&ifmgd->csa_connection_drop_work);
4954 cancel_work_sync(&ifmgd->chswitch_work);
4955 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
4958 if (ifmgd->assoc_data) {
4959 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4960 ieee80211_destroy_assoc_data(sdata, false);
4961 cfg80211_assoc_timeout(sdata->dev, bss);
4963 if (ifmgd->auth_data)
4964 ieee80211_destroy_auth_data(sdata, false);
4965 spin_lock_bh(&ifmgd->teardown_lock);
4966 if (ifmgd->teardown_skb) {
4967 kfree_skb(ifmgd->teardown_skb);
4968 ifmgd->teardown_skb = NULL;
4969 ifmgd->orig_teardown_skb = NULL;
4971 spin_unlock_bh(&ifmgd->teardown_lock);
4972 del_timer_sync(&ifmgd->timer);
4973 sdata_unlock(sdata);
4976 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
4977 enum nl80211_cqm_rssi_threshold_event rssi_event,
4980 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
4982 trace_api_cqm_rssi_notify(sdata, rssi_event);
4984 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
4986 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
4988 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
4990 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
4992 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
4994 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
4996 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);