2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/delay.h>
17 #include <linux/if_ether.h>
18 #include <linux/skbuff.h>
19 #include <linux/if_arp.h>
20 #include <linux/etherdevice.h>
21 #include <linux/moduleparam.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
33 #include "fils_aead.h"
35 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
36 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
37 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
38 #define IEEE80211_AUTH_MAX_TRIES 3
39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
40 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
41 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
42 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
43 #define IEEE80211_ASSOC_MAX_TRIES 3
45 static int max_nullfunc_tries = 2;
46 module_param(max_nullfunc_tries, int, 0644);
47 MODULE_PARM_DESC(max_nullfunc_tries,
48 "Maximum nullfunc tx tries before disconnecting (reason 4).");
50 static int max_probe_tries = 5;
51 module_param(max_probe_tries, int, 0644);
52 MODULE_PARM_DESC(max_probe_tries,
53 "Maximum probe tries before disconnecting (reason 4).");
56 * Beacon loss timeout is calculated as N frames times the
57 * advertised beacon interval. This may need to be somewhat
58 * higher than what hardware might detect to account for
59 * delays in the host processing frames. But since we also
60 * probe on beacon miss before declaring the connection lost
61 * default to what we want.
63 static int beacon_loss_count = 7;
64 module_param(beacon_loss_count, int, 0644);
65 MODULE_PARM_DESC(beacon_loss_count,
66 "Number of beacon intervals before we decide beacon was lost.");
69 * Time the connection can be idle before we probe
70 * it to see if we can still talk to the AP.
72 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
74 * Time we wait for a probe response after sending
75 * a probe request because of beacon loss or for
76 * checking the connection still works.
78 static int probe_wait_ms = 500;
79 module_param(probe_wait_ms, int, 0644);
80 MODULE_PARM_DESC(probe_wait_ms,
81 "Maximum time(ms) to wait for probe response"
82 " before disconnecting (reason 4).");
85 * How many Beacon frames need to have been used in average signal strength
86 * before starting to indicate signal change events.
88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
91 * We can have multiple work items (and connection probing)
92 * scheduling this timer, but we need to take care to only
93 * reschedule it when it should fire _earlier_ than it was
94 * asked for before, or if it's not pending right now. This
95 * function ensures that. Note that it then is required to
96 * run this function for all timeouts after the first one
97 * has happened -- the work that runs from this timer will
100 static void run_again(struct ieee80211_sub_if_data *sdata,
101 unsigned long timeout)
103 sdata_assert_lock(sdata);
105 if (!timer_pending(&sdata->u.mgd.timer) ||
106 time_before(timeout, sdata->u.mgd.timer.expires))
107 mod_timer(&sdata->u.mgd.timer, timeout);
110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
112 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
115 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
118 mod_timer(&sdata->u.mgd.bcn_mon_timer,
119 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
124 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
126 if (unlikely(!ifmgd->associated))
129 if (ifmgd->probe_send_count)
130 ifmgd->probe_send_count = 0;
132 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
135 mod_timer(&ifmgd->conn_mon_timer,
136 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
139 static int ecw2cw(int ecw)
141 return (1 << ecw) - 1;
145 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
146 struct ieee80211_supported_band *sband,
147 struct ieee80211_channel *channel,
148 const struct ieee80211_ht_cap *ht_cap,
149 const struct ieee80211_ht_operation *ht_oper,
150 const struct ieee80211_vht_operation *vht_oper,
151 struct cfg80211_chan_def *chandef, bool tracking)
153 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
154 struct cfg80211_chan_def vht_chandef;
155 struct ieee80211_sta_ht_cap sta_ht_cap;
158 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
159 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
161 chandef->chan = channel;
162 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
163 chandef->center_freq1 = channel->center_freq;
164 chandef->center_freq2 = 0;
166 if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) {
167 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
171 chandef->width = NL80211_CHAN_WIDTH_20;
173 if (!(ht_cap->cap_info &
174 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
175 ret = IEEE80211_STA_DISABLE_40MHZ;
176 vht_chandef = *chandef;
180 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
182 /* check that channel matches the right operating channel */
183 if (!tracking && channel->center_freq != ht_cfreq) {
185 * It's possible that some APs are confused here;
186 * Netgear WNDR3700 sometimes reports 4 higher than
187 * the actual channel in association responses, but
188 * since we look at probe response/beacon data here
192 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
193 channel->center_freq, ht_cfreq,
194 ht_oper->primary_chan, channel->band);
195 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
199 /* check 40 MHz support, if we have it */
200 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
201 ieee80211_chandef_ht_oper(ht_oper, chandef);
203 /* 40 MHz (and 80 MHz) must be supported for VHT */
204 ret = IEEE80211_STA_DISABLE_VHT;
205 /* also mark 40 MHz disabled */
206 ret |= IEEE80211_STA_DISABLE_40MHZ;
210 if (!vht_oper || !sband->vht_cap.vht_supported) {
211 ret = IEEE80211_STA_DISABLE_VHT;
215 vht_chandef = *chandef;
216 if (!ieee80211_chandef_vht_oper(vht_oper, &vht_chandef)) {
217 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
219 "AP VHT information is invalid, disable VHT\n");
220 ret = IEEE80211_STA_DISABLE_VHT;
224 if (!cfg80211_chandef_valid(&vht_chandef)) {
225 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
227 "AP VHT information is invalid, disable VHT\n");
228 ret = IEEE80211_STA_DISABLE_VHT;
232 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
237 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
238 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
240 "AP VHT information doesn't match HT, disable VHT\n");
241 ret = IEEE80211_STA_DISABLE_VHT;
245 *chandef = vht_chandef;
251 * When tracking the current AP, don't do any further checks if the
252 * new chandef is identical to the one we're currently using for the
253 * connection. This keeps us from playing ping-pong with regulatory,
254 * without it the following can happen (for example):
255 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
256 * - AP advertises regdom US
257 * - CRDA loads regdom US with 80 MHz prohibited (old database)
258 * - the code below detects an unsupported channel, downgrades, and
259 * we disconnect from the AP in the caller
260 * - disconnect causes CRDA to reload world regdomain and the game
262 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
264 * It seems possible that there are still scenarios with CSA or real
265 * bandwidth changes where a this could happen, but those cases are
266 * less common and wouldn't completely prevent using the AP.
269 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
272 /* don't print the message below for VHT mismatch if VHT is disabled */
273 if (ret & IEEE80211_STA_DISABLE_VHT)
274 vht_chandef = *chandef;
277 * Ignore the DISABLED flag when we're already connected and only
278 * tracking the APs beacon for bandwidth changes - otherwise we
279 * might get disconnected here if we connect to an AP, update our
280 * regulatory information based on the AP's country IE and the
281 * information we have is wrong/outdated and disables the channel
282 * that we're actually using for the connection to the AP.
284 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
286 IEEE80211_CHAN_DISABLED)) {
287 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
288 ret = IEEE80211_STA_DISABLE_HT |
289 IEEE80211_STA_DISABLE_VHT;
293 ret |= ieee80211_chandef_downgrade(chandef);
296 if (chandef->width != vht_chandef.width && !tracking)
298 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
300 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
304 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
305 struct sta_info *sta,
306 const struct ieee80211_ht_cap *ht_cap,
307 const struct ieee80211_ht_operation *ht_oper,
308 const struct ieee80211_vht_operation *vht_oper,
309 const u8 *bssid, u32 *changed)
311 struct ieee80211_local *local = sdata->local;
312 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
313 struct ieee80211_supported_band *sband;
314 struct ieee80211_channel *chan;
315 struct cfg80211_chan_def chandef;
318 enum ieee80211_sta_rx_bandwidth new_sta_bw;
321 /* if HT was/is disabled, don't track any bandwidth changes */
322 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
325 /* don't check VHT if we associated as non-VHT station */
326 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
329 if (WARN_ON_ONCE(!sta))
333 * if bss configuration changed store the new one -
334 * this may be applicable even if channel is identical
336 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
337 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
338 *changed |= BSS_CHANGED_HT;
339 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
342 chan = sdata->vif.bss_conf.chandef.chan;
343 sband = local->hw.wiphy->bands[chan->band];
345 /* calculate new channel (type) based on HT/VHT operation IEs */
346 flags = ieee80211_determine_chantype(sdata, sband, chan,
347 ht_cap, ht_oper, vht_oper,
351 * Downgrade the new channel if we associated with restricted
352 * capabilities. For example, if we associated as a 20 MHz STA
353 * to a 40 MHz AP (due to regulatory, capabilities or config
354 * reasons) then switching to a 40 MHz channel now won't do us
355 * any good -- we couldn't use it with the AP.
357 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
358 chandef.width == NL80211_CHAN_WIDTH_80P80)
359 flags |= ieee80211_chandef_downgrade(&chandef);
360 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
361 chandef.width == NL80211_CHAN_WIDTH_160)
362 flags |= ieee80211_chandef_downgrade(&chandef);
363 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
364 chandef.width > NL80211_CHAN_WIDTH_20)
365 flags |= ieee80211_chandef_downgrade(&chandef);
367 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
371 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
372 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
373 chandef.center_freq1, chandef.center_freq2);
375 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
376 IEEE80211_STA_DISABLE_VHT |
377 IEEE80211_STA_DISABLE_40MHZ |
378 IEEE80211_STA_DISABLE_80P80MHZ |
379 IEEE80211_STA_DISABLE_160MHZ)) ||
380 !cfg80211_chandef_valid(&chandef)) {
382 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
387 switch (chandef.width) {
388 case NL80211_CHAN_WIDTH_20_NOHT:
389 case NL80211_CHAN_WIDTH_20:
390 new_sta_bw = IEEE80211_STA_RX_BW_20;
392 case NL80211_CHAN_WIDTH_40:
393 new_sta_bw = IEEE80211_STA_RX_BW_40;
395 case NL80211_CHAN_WIDTH_80:
396 new_sta_bw = IEEE80211_STA_RX_BW_80;
398 case NL80211_CHAN_WIDTH_80P80:
399 case NL80211_CHAN_WIDTH_160:
400 new_sta_bw = IEEE80211_STA_RX_BW_160;
406 if (new_sta_bw > sta->cur_max_bandwidth)
407 new_sta_bw = sta->cur_max_bandwidth;
409 if (new_sta_bw < sta->sta.bandwidth) {
410 sta->sta.bandwidth = new_sta_bw;
411 rate_control_rate_update(local, sband, sta,
412 IEEE80211_RC_BW_CHANGED);
415 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
418 "AP %pM changed bandwidth to incompatible one - disconnect\n",
423 if (new_sta_bw > sta->sta.bandwidth) {
424 sta->sta.bandwidth = new_sta_bw;
425 rate_control_rate_update(local, sband, sta,
426 IEEE80211_RC_BW_CHANGED);
432 /* frame sending functions */
434 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
435 struct sk_buff *skb, u8 ap_ht_param,
436 struct ieee80211_supported_band *sband,
437 struct ieee80211_channel *channel,
438 enum ieee80211_smps_mode smps)
441 u32 flags = channel->flags;
443 struct ieee80211_sta_ht_cap ht_cap;
445 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
447 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
448 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
450 /* determine capability flags */
453 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
454 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
455 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
456 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
457 cap &= ~IEEE80211_HT_CAP_SGI_40;
460 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
461 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
462 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
463 cap &= ~IEEE80211_HT_CAP_SGI_40;
469 * If 40 MHz was disabled associate as though we weren't
470 * capable of 40 MHz -- some broken APs will never fall
471 * back to trying to transmit in 20 MHz.
473 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
474 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
475 cap &= ~IEEE80211_HT_CAP_SGI_40;
478 /* set SM PS mode properly */
479 cap &= ~IEEE80211_HT_CAP_SM_PS;
481 case IEEE80211_SMPS_AUTOMATIC:
482 case IEEE80211_SMPS_NUM_MODES:
484 case IEEE80211_SMPS_OFF:
485 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
486 IEEE80211_HT_CAP_SM_PS_SHIFT;
488 case IEEE80211_SMPS_STATIC:
489 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
490 IEEE80211_HT_CAP_SM_PS_SHIFT;
492 case IEEE80211_SMPS_DYNAMIC:
493 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
494 IEEE80211_HT_CAP_SM_PS_SHIFT;
498 /* reserve and fill IE */
499 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
500 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
503 /* This function determines vht capability flags for the association
505 * Note - the function may set the owner of the MU-MIMO capability
507 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
509 struct ieee80211_supported_band *sband,
510 struct ieee80211_vht_cap *ap_vht_cap)
512 struct ieee80211_local *local = sdata->local;
515 struct ieee80211_sta_vht_cap vht_cap;
516 u32 mask, ap_bf_sts, our_bf_sts;
518 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
520 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
521 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
523 /* determine capability flags */
526 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
527 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
529 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
530 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
531 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
532 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
535 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
536 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
537 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
541 * Some APs apparently get confused if our capabilities are better
542 * than theirs, so restrict what we advertise in the assoc request.
544 if (!(ap_vht_cap->vht_cap_info &
545 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
546 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
547 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
548 else if (!(ap_vht_cap->vht_cap_info &
549 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
550 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
553 * If some other vif is using the MU-MIMO capablity we cannot associate
554 * using MU-MIMO - this will lead to contradictions in the group-id
556 * Ownership is defined since association request, in order to avoid
557 * simultaneous associations with MU-MIMO.
559 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
560 bool disable_mu_mimo = false;
561 struct ieee80211_sub_if_data *other;
563 list_for_each_entry_rcu(other, &local->interfaces, list) {
564 if (other->vif.mu_mimo_owner) {
565 disable_mu_mimo = true;
570 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
572 sdata->vif.mu_mimo_owner = true;
575 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
577 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
578 our_bf_sts = cap & mask;
580 if (ap_bf_sts < our_bf_sts) {
585 /* reserve and fill IE */
586 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
587 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
590 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
592 struct ieee80211_local *local = sdata->local;
593 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
594 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
596 struct ieee80211_mgmt *mgmt;
598 size_t offset = 0, noffset;
599 int i, count, rates_len, supp_rates_len, shift;
601 struct ieee80211_supported_band *sband;
602 struct ieee80211_chanctx_conf *chanctx_conf;
603 struct ieee80211_channel *chan;
604 u32 rate_flags, rates = 0;
606 sdata_assert_lock(sdata);
609 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
610 if (WARN_ON(!chanctx_conf)) {
614 chan = chanctx_conf->def.chan;
615 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
617 sband = local->hw.wiphy->bands[chan->band];
618 shift = ieee80211_vif_get_shift(&sdata->vif);
620 if (assoc_data->supp_rates_len) {
622 * Get all rates supported by the device and the AP as
623 * some APs don't like getting a superset of their rates
624 * in the association request (e.g. D-Link DAP 1353 in
627 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
628 assoc_data->supp_rates,
629 assoc_data->supp_rates_len,
633 * In case AP not provide any supported rates information
634 * before association, we send information element(s) with
635 * all rates that we support.
638 for (i = 0; i < sband->n_bitrates; i++) {
639 if ((rate_flags & sband->bitrates[i].flags)
647 skb = alloc_skb(local->hw.extra_tx_headroom +
648 sizeof(*mgmt) + /* bit too much but doesn't matter */
649 2 + assoc_data->ssid_len + /* SSID */
650 4 + rates_len + /* (extended) rates */
651 4 + /* power capability */
652 2 + 2 * sband->n_channels + /* supported channels */
653 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
654 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
655 assoc_data->ie_len + /* extra IEs */
656 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
662 skb_reserve(skb, local->hw.extra_tx_headroom);
664 capab = WLAN_CAPABILITY_ESS;
666 if (sband->band == NL80211_BAND_2GHZ) {
667 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
668 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
671 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
672 capab |= WLAN_CAPABILITY_PRIVACY;
674 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
675 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
676 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
678 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
679 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
681 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
683 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
684 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
685 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
687 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
689 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
690 IEEE80211_STYPE_REASSOC_REQ);
691 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
692 mgmt->u.reassoc_req.listen_interval =
693 cpu_to_le16(local->hw.conf.listen_interval);
694 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
698 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
699 IEEE80211_STYPE_ASSOC_REQ);
700 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
701 mgmt->u.assoc_req.listen_interval =
702 cpu_to_le16(local->hw.conf.listen_interval);
706 pos = skb_put(skb, 2 + assoc_data->ssid_len);
707 *pos++ = WLAN_EID_SSID;
708 *pos++ = assoc_data->ssid_len;
709 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
711 /* add all rates which were marked to be used above */
712 supp_rates_len = rates_len;
713 if (supp_rates_len > 8)
716 pos = skb_put(skb, supp_rates_len + 2);
717 *pos++ = WLAN_EID_SUPP_RATES;
718 *pos++ = supp_rates_len;
721 for (i = 0; i < sband->n_bitrates; i++) {
722 if (BIT(i) & rates) {
723 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
731 if (rates_len > count) {
732 pos = skb_put(skb, rates_len - count + 2);
733 *pos++ = WLAN_EID_EXT_SUPP_RATES;
734 *pos++ = rates_len - count;
736 for (i++; i < sband->n_bitrates; i++) {
737 if (BIT(i) & rates) {
739 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
746 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
747 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
748 pos = skb_put(skb, 4);
749 *pos++ = WLAN_EID_PWR_CAPABILITY;
751 *pos++ = 0; /* min tx power */
753 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
756 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
757 /* TODO: get this in reg domain format */
758 pos = skb_put(skb, 2 * sband->n_channels + 2);
759 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
760 *pos++ = 2 * sband->n_channels;
761 for (i = 0; i < sband->n_channels; i++) {
762 *pos++ = ieee80211_frequency_to_channel(
763 sband->channels[i].center_freq);
764 *pos++ = 1; /* one channel in the subband*/
768 /* if present, add any custom IEs that go before HT */
769 if (assoc_data->ie_len) {
770 static const u8 before_ht[] = {
773 WLAN_EID_EXT_SUPP_RATES,
774 WLAN_EID_PWR_CAPABILITY,
775 WLAN_EID_SUPPORTED_CHANNELS,
778 WLAN_EID_RRM_ENABLED_CAPABILITIES,
779 WLAN_EID_MOBILITY_DOMAIN,
780 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
781 WLAN_EID_RIC_DATA, /* reassoc only */
782 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
784 static const u8 after_ric[] = {
785 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
786 WLAN_EID_HT_CAPABILITY,
787 WLAN_EID_BSS_COEX_2040,
788 WLAN_EID_EXT_CAPABILITY,
789 WLAN_EID_QOS_TRAFFIC_CAPA,
790 WLAN_EID_TIM_BCAST_REQ,
791 WLAN_EID_INTERWORKING,
792 /* 60GHz doesn't happen right now */
793 WLAN_EID_VHT_CAPABILITY,
794 WLAN_EID_OPMODE_NOTIF,
797 noffset = ieee80211_ie_split_ric(assoc_data->ie,
800 ARRAY_SIZE(before_ht),
802 ARRAY_SIZE(after_ric),
804 pos = skb_put(skb, noffset - offset);
805 memcpy(pos, assoc_data->ie + offset, noffset - offset);
809 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
810 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
811 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
813 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
814 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
815 sband, chan, sdata->smps_mode);
817 /* if present, add any custom IEs that go before VHT */
818 if (assoc_data->ie_len) {
819 static const u8 before_vht[] = {
822 WLAN_EID_EXT_SUPP_RATES,
823 WLAN_EID_PWR_CAPABILITY,
824 WLAN_EID_SUPPORTED_CHANNELS,
827 WLAN_EID_RRM_ENABLED_CAPABILITIES,
828 WLAN_EID_MOBILITY_DOMAIN,
829 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
830 WLAN_EID_HT_CAPABILITY,
831 WLAN_EID_BSS_COEX_2040,
832 WLAN_EID_EXT_CAPABILITY,
833 WLAN_EID_QOS_TRAFFIC_CAPA,
834 WLAN_EID_TIM_BCAST_REQ,
835 WLAN_EID_INTERWORKING,
838 /* RIC already taken above, so no need to handle here anymore */
839 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
840 before_vht, ARRAY_SIZE(before_vht),
842 pos = skb_put(skb, noffset - offset);
843 memcpy(pos, assoc_data->ie + offset, noffset - offset);
847 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
848 ieee80211_add_vht_ie(sdata, skb, sband,
849 &assoc_data->ap_vht_cap);
851 /* if present, add any custom non-vendor IEs that go after HT */
852 if (assoc_data->ie_len) {
853 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
856 pos = skb_put(skb, noffset - offset);
857 memcpy(pos, assoc_data->ie + offset, noffset - offset);
861 if (assoc_data->wmm) {
862 if (assoc_data->uapsd) {
863 qos_info = ifmgd->uapsd_queues;
864 qos_info |= (ifmgd->uapsd_max_sp_len <<
865 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
870 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
873 /* add any remaining custom (i.e. vendor specific here) IEs */
874 if (assoc_data->ie_len) {
875 noffset = assoc_data->ie_len;
876 pos = skb_put(skb, noffset - offset);
877 memcpy(pos, assoc_data->ie + offset, noffset - offset);
880 if (assoc_data->fils_kek_len &&
881 fils_encrypt_assoc_req(skb, assoc_data) < 0) {
886 drv_mgd_prepare_tx(local, sdata);
888 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
889 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
890 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
891 IEEE80211_TX_INTFL_MLME_CONN_TX;
892 ieee80211_tx_skb(sdata, skb);
895 void ieee80211_send_pspoll(struct ieee80211_local *local,
896 struct ieee80211_sub_if_data *sdata)
898 struct ieee80211_pspoll *pspoll;
901 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
905 pspoll = (struct ieee80211_pspoll *) skb->data;
906 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
908 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
909 ieee80211_tx_skb(sdata, skb);
912 void ieee80211_send_nullfunc(struct ieee80211_local *local,
913 struct ieee80211_sub_if_data *sdata,
917 struct ieee80211_hdr_3addr *nullfunc;
918 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
920 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
924 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
926 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
928 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
929 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
931 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
932 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
934 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
935 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
937 ieee80211_tx_skb(sdata, skb);
940 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
941 struct ieee80211_sub_if_data *sdata)
944 struct ieee80211_hdr *nullfunc;
947 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
950 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
954 skb_reserve(skb, local->hw.extra_tx_headroom);
956 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
957 memset(nullfunc, 0, 30);
958 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
959 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
960 nullfunc->frame_control = fc;
961 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
962 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
963 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
964 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
966 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
967 ieee80211_tx_skb(sdata, skb);
970 /* spectrum management related things */
971 static void ieee80211_chswitch_work(struct work_struct *work)
973 struct ieee80211_sub_if_data *sdata =
974 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
975 struct ieee80211_local *local = sdata->local;
976 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
979 if (!ieee80211_sdata_running(sdata))
983 mutex_lock(&local->mtx);
984 mutex_lock(&local->chanctx_mtx);
986 if (!ifmgd->associated)
989 if (!sdata->vif.csa_active)
993 * using reservation isn't immediate as it may be deferred until later
994 * with multi-vif. once reservation is complete it will re-schedule the
995 * work with no reserved_chanctx so verify chandef to check if it
996 * completed successfully
999 if (sdata->reserved_chanctx) {
1001 * with multi-vif csa driver may call ieee80211_csa_finish()
1002 * many times while waiting for other interfaces to use their
1005 if (sdata->reserved_ready)
1008 ret = ieee80211_vif_use_reserved_context(sdata);
1011 "failed to use reserved channel context, disconnecting (err=%d)\n",
1013 ieee80211_queue_work(&sdata->local->hw,
1014 &ifmgd->csa_connection_drop_work);
1021 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1022 &sdata->csa_chandef)) {
1024 "failed to finalize channel switch, disconnecting\n");
1025 ieee80211_queue_work(&sdata->local->hw,
1026 &ifmgd->csa_connection_drop_work);
1030 /* XXX: shouldn't really modify cfg80211-owned data! */
1031 ifmgd->associated->channel = sdata->csa_chandef.chan;
1033 ifmgd->csa_waiting_bcn = true;
1035 ieee80211_sta_reset_beacon_monitor(sdata);
1036 ieee80211_sta_reset_conn_monitor(sdata);
1039 mutex_unlock(&local->chanctx_mtx);
1040 mutex_unlock(&local->mtx);
1041 sdata_unlock(sdata);
1044 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1046 struct ieee80211_local *local = sdata->local;
1047 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1050 sdata_assert_lock(sdata);
1052 WARN_ON(!sdata->vif.csa_active);
1054 if (sdata->csa_block_tx) {
1055 ieee80211_wake_vif_queues(local, sdata,
1056 IEEE80211_QUEUE_STOP_REASON_CSA);
1057 sdata->csa_block_tx = false;
1060 sdata->vif.csa_active = false;
1061 ifmgd->csa_waiting_bcn = false;
1063 ret = drv_post_channel_switch(sdata);
1066 "driver post channel switch failed, disconnecting\n");
1067 ieee80211_queue_work(&local->hw,
1068 &ifmgd->csa_connection_drop_work);
1072 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1075 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1077 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1078 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1080 trace_api_chswitch_done(sdata, success);
1083 "driver channel switch failed, disconnecting\n");
1084 ieee80211_queue_work(&sdata->local->hw,
1085 &ifmgd->csa_connection_drop_work);
1087 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1090 EXPORT_SYMBOL(ieee80211_chswitch_done);
1092 static void ieee80211_chswitch_timer(unsigned long data)
1094 struct ieee80211_sub_if_data *sdata =
1095 (struct ieee80211_sub_if_data *) data;
1097 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1101 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1102 u64 timestamp, u32 device_timestamp,
1103 struct ieee802_11_elems *elems,
1106 struct ieee80211_local *local = sdata->local;
1107 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1108 struct cfg80211_bss *cbss = ifmgd->associated;
1109 struct ieee80211_chanctx_conf *conf;
1110 struct ieee80211_chanctx *chanctx;
1111 enum nl80211_band current_band;
1112 struct ieee80211_csa_ie csa_ie;
1113 struct ieee80211_channel_switch ch_switch;
1116 sdata_assert_lock(sdata);
1121 if (local->scanning)
1124 /* disregard subsequent announcements if we are already processing */
1125 if (sdata->vif.csa_active)
1128 current_band = cbss->channel->band;
1129 memset(&csa_ie, 0, sizeof(csa_ie));
1130 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1132 ifmgd->associated->bssid, &csa_ie);
1134 ieee80211_queue_work(&local->hw,
1135 &ifmgd->csa_connection_drop_work);
1139 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1140 IEEE80211_CHAN_DISABLED)) {
1142 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1143 ifmgd->associated->bssid,
1144 csa_ie.chandef.chan->center_freq,
1145 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1146 csa_ie.chandef.center_freq2);
1147 ieee80211_queue_work(&local->hw,
1148 &ifmgd->csa_connection_drop_work);
1152 if (cfg80211_chandef_identical(&csa_ie.chandef,
1153 &sdata->vif.bss_conf.chandef)) {
1154 if (ifmgd->csa_ignored_same_chan)
1157 "AP %pM tries to chanswitch to same channel, ignore\n",
1158 ifmgd->associated->bssid);
1159 ifmgd->csa_ignored_same_chan = true;
1164 * Drop all TDLS peers - either we disconnect or move to a different
1165 * channel from this point on. There's no telling what our peer will do.
1166 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1167 * have an incompatible wider chandef.
1169 ieee80211_teardown_tdls_peers(sdata);
1171 mutex_lock(&local->mtx);
1172 mutex_lock(&local->chanctx_mtx);
1173 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1174 lockdep_is_held(&local->chanctx_mtx));
1177 "no channel context assigned to vif?, disconnecting\n");
1178 goto drop_connection;
1181 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1183 if (local->use_chanctx &&
1184 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1186 "driver doesn't support chan-switch with channel contexts\n");
1187 goto drop_connection;
1190 ch_switch.timestamp = timestamp;
1191 ch_switch.device_timestamp = device_timestamp;
1192 ch_switch.block_tx = csa_ie.mode;
1193 ch_switch.chandef = csa_ie.chandef;
1194 ch_switch.count = csa_ie.count;
1196 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1198 "preparing for channel switch failed, disconnecting\n");
1199 goto drop_connection;
1202 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1203 chanctx->mode, false);
1206 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1208 goto drop_connection;
1210 mutex_unlock(&local->chanctx_mtx);
1212 sdata->vif.csa_active = true;
1213 sdata->csa_chandef = csa_ie.chandef;
1214 sdata->csa_block_tx = csa_ie.mode;
1215 ifmgd->csa_ignored_same_chan = false;
1217 if (sdata->csa_block_tx)
1218 ieee80211_stop_vif_queues(local, sdata,
1219 IEEE80211_QUEUE_STOP_REASON_CSA);
1220 mutex_unlock(&local->mtx);
1222 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1225 if (local->ops->channel_switch) {
1226 /* use driver's channel switch callback */
1227 drv_channel_switch(local, sdata, &ch_switch);
1231 /* channel switch handled in software */
1232 if (csa_ie.count <= 1)
1233 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1235 mod_timer(&ifmgd->chswitch_timer,
1236 TU_TO_EXP_TIME((csa_ie.count - 1) *
1237 cbss->beacon_interval));
1240 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1241 mutex_unlock(&local->chanctx_mtx);
1242 mutex_unlock(&local->mtx);
1246 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1247 struct ieee80211_channel *channel,
1248 const u8 *country_ie, u8 country_ie_len,
1249 const u8 *pwr_constr_elem,
1250 int *chan_pwr, int *pwr_reduction)
1252 struct ieee80211_country_ie_triplet *triplet;
1253 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1254 int i, chan_increment;
1255 bool have_chan_pwr = false;
1258 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1261 triplet = (void *)(country_ie + 3);
1262 country_ie_len -= 3;
1264 switch (channel->band) {
1268 case NL80211_BAND_2GHZ:
1269 case NL80211_BAND_60GHZ:
1272 case NL80211_BAND_5GHZ:
1278 while (country_ie_len >= 3) {
1279 u8 first_channel = triplet->chans.first_channel;
1281 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1284 for (i = 0; i < triplet->chans.num_channels; i++) {
1285 if (first_channel + i * chan_increment == chan) {
1286 have_chan_pwr = true;
1287 *chan_pwr = triplet->chans.max_power;
1296 country_ie_len -= 3;
1299 if (have_chan_pwr && pwr_constr_elem)
1300 *pwr_reduction = *pwr_constr_elem;
1304 return have_chan_pwr;
1307 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1308 struct ieee80211_channel *channel,
1309 const u8 *cisco_dtpc_ie,
1312 /* From practical testing, the first data byte of the DTPC element
1313 * seems to contain the requested dBm level, and the CLI on Cisco
1314 * APs clearly state the range is -127 to 127 dBm, which indicates
1315 * a signed byte, although it seemingly never actually goes negative.
1316 * The other byte seems to always be zero.
1318 *pwr_level = (__s8)cisco_dtpc_ie[4];
1321 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1322 struct ieee80211_channel *channel,
1323 struct ieee80211_mgmt *mgmt,
1324 const u8 *country_ie, u8 country_ie_len,
1325 const u8 *pwr_constr_ie,
1326 const u8 *cisco_dtpc_ie)
1328 bool has_80211h_pwr = false, has_cisco_pwr = false;
1329 int chan_pwr = 0, pwr_reduction_80211h = 0;
1330 int pwr_level_cisco, pwr_level_80211h;
1332 __le16 capab = mgmt->u.probe_resp.capab_info;
1335 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1336 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1337 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1338 sdata, channel, country_ie, country_ie_len,
1339 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1341 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1344 if (cisco_dtpc_ie) {
1345 ieee80211_find_cisco_dtpc(
1346 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1347 has_cisco_pwr = true;
1350 if (!has_80211h_pwr && !has_cisco_pwr)
1353 /* If we have both 802.11h and Cisco DTPC, apply both limits
1354 * by picking the smallest of the two power levels advertised.
1356 if (has_80211h_pwr &&
1357 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1358 new_ap_level = pwr_level_80211h;
1360 if (sdata->ap_power_level == new_ap_level)
1364 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1365 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1366 sdata->u.mgd.bssid);
1367 } else { /* has_cisco_pwr is always true here. */
1368 new_ap_level = pwr_level_cisco;
1370 if (sdata->ap_power_level == new_ap_level)
1374 "Limiting TX power to %d dBm as advertised by %pM\n",
1375 pwr_level_cisco, sdata->u.mgd.bssid);
1378 sdata->ap_power_level = new_ap_level;
1379 if (__ieee80211_recalc_txpower(sdata))
1380 return BSS_CHANGED_TXPOWER;
1385 static void ieee80211_enable_ps(struct ieee80211_local *local,
1386 struct ieee80211_sub_if_data *sdata)
1388 struct ieee80211_conf *conf = &local->hw.conf;
1391 * If we are scanning right now then the parameters will
1392 * take effect when scan finishes.
1394 if (local->scanning)
1397 if (conf->dynamic_ps_timeout > 0 &&
1398 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1399 mod_timer(&local->dynamic_ps_timer, jiffies +
1400 msecs_to_jiffies(conf->dynamic_ps_timeout));
1402 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1403 ieee80211_send_nullfunc(local, sdata, true);
1405 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1406 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1409 conf->flags |= IEEE80211_CONF_PS;
1410 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1414 static void ieee80211_change_ps(struct ieee80211_local *local)
1416 struct ieee80211_conf *conf = &local->hw.conf;
1418 if (local->ps_sdata) {
1419 ieee80211_enable_ps(local, local->ps_sdata);
1420 } else if (conf->flags & IEEE80211_CONF_PS) {
1421 conf->flags &= ~IEEE80211_CONF_PS;
1422 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1423 del_timer_sync(&local->dynamic_ps_timer);
1424 cancel_work_sync(&local->dynamic_ps_enable_work);
1428 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1430 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1431 struct sta_info *sta = NULL;
1432 bool authorized = false;
1434 if (!mgd->powersave)
1440 if (!mgd->associated)
1443 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1446 if (!mgd->have_beacon)
1450 sta = sta_info_get(sdata, mgd->bssid);
1452 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1458 /* need to hold RTNL or interface lock */
1459 void ieee80211_recalc_ps(struct ieee80211_local *local)
1461 struct ieee80211_sub_if_data *sdata, *found = NULL;
1465 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1466 local->ps_sdata = NULL;
1470 list_for_each_entry(sdata, &local->interfaces, list) {
1471 if (!ieee80211_sdata_running(sdata))
1473 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1474 /* If an AP vif is found, then disable PS
1475 * by setting the count to zero thereby setting
1481 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1487 if (count == 1 && ieee80211_powersave_allowed(found)) {
1488 u8 dtimper = found->u.mgd.dtim_period;
1490 timeout = local->dynamic_ps_forced_timeout;
1493 local->hw.conf.dynamic_ps_timeout = timeout;
1495 /* If the TIM IE is invalid, pretend the value is 1 */
1499 local->hw.conf.ps_dtim_period = dtimper;
1500 local->ps_sdata = found;
1502 local->ps_sdata = NULL;
1505 ieee80211_change_ps(local);
1508 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1510 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1512 if (sdata->vif.bss_conf.ps != ps_allowed) {
1513 sdata->vif.bss_conf.ps = ps_allowed;
1514 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1518 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1520 struct ieee80211_local *local =
1521 container_of(work, struct ieee80211_local,
1522 dynamic_ps_disable_work);
1524 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1525 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1526 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1529 ieee80211_wake_queues_by_reason(&local->hw,
1530 IEEE80211_MAX_QUEUE_MAP,
1531 IEEE80211_QUEUE_STOP_REASON_PS,
1535 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1537 struct ieee80211_local *local =
1538 container_of(work, struct ieee80211_local,
1539 dynamic_ps_enable_work);
1540 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1541 struct ieee80211_if_managed *ifmgd;
1542 unsigned long flags;
1545 /* can only happen when PS was just disabled anyway */
1549 ifmgd = &sdata->u.mgd;
1551 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1554 if (local->hw.conf.dynamic_ps_timeout > 0) {
1555 /* don't enter PS if TX frames are pending */
1556 if (drv_tx_frames_pending(local)) {
1557 mod_timer(&local->dynamic_ps_timer, jiffies +
1559 local->hw.conf.dynamic_ps_timeout));
1564 * transmission can be stopped by others which leads to
1565 * dynamic_ps_timer expiry. Postpone the ps timer if it
1566 * is not the actual idle state.
1568 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1569 for (q = 0; q < local->hw.queues; q++) {
1570 if (local->queue_stop_reasons[q]) {
1571 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1573 mod_timer(&local->dynamic_ps_timer, jiffies +
1575 local->hw.conf.dynamic_ps_timeout));
1579 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1582 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1583 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1584 if (drv_tx_frames_pending(local)) {
1585 mod_timer(&local->dynamic_ps_timer, jiffies +
1587 local->hw.conf.dynamic_ps_timeout));
1589 ieee80211_send_nullfunc(local, sdata, true);
1590 /* Flush to get the tx status of nullfunc frame */
1591 ieee80211_flush_queues(local, sdata, false);
1595 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1596 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1597 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1598 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1599 local->hw.conf.flags |= IEEE80211_CONF_PS;
1600 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1604 void ieee80211_dynamic_ps_timer(unsigned long data)
1606 struct ieee80211_local *local = (void *) data;
1608 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1611 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1613 struct delayed_work *delayed_work = to_delayed_work(work);
1614 struct ieee80211_sub_if_data *sdata =
1615 container_of(delayed_work, struct ieee80211_sub_if_data,
1616 dfs_cac_timer_work);
1617 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1619 mutex_lock(&sdata->local->mtx);
1620 if (sdata->wdev.cac_started) {
1621 ieee80211_vif_release_channel(sdata);
1622 cfg80211_cac_event(sdata->dev, &chandef,
1623 NL80211_RADAR_CAC_FINISHED,
1626 mutex_unlock(&sdata->local->mtx);
1630 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1632 struct ieee80211_local *local = sdata->local;
1633 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1637 if (local->hw.queues < IEEE80211_NUM_ACS)
1640 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1641 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1643 unsigned long now = jiffies;
1645 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1646 tx_tspec->admitted_time &&
1647 time_after(now, tx_tspec->time_slice_start + HZ)) {
1648 tx_tspec->consumed_tx_time = 0;
1649 tx_tspec->time_slice_start = now;
1651 if (tx_tspec->downgraded)
1653 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1656 switch (tx_tspec->action) {
1657 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1658 /* take the original parameters */
1659 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1661 "failed to set TX queue parameters for queue %d\n",
1663 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1664 tx_tspec->downgraded = false;
1667 case TX_TSPEC_ACTION_DOWNGRADE:
1668 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1669 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1673 /* downgrade next lower non-ACM AC */
1674 for (non_acm_ac = ac + 1;
1675 non_acm_ac < IEEE80211_NUM_ACS;
1677 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1679 /* Usually the loop will result in using BK even if it
1680 * requires admission control, but such a configuration
1681 * makes no sense and we have to transmit somehow - the
1682 * AC selection does the same thing.
1683 * If we started out trying to downgrade from BK, then
1684 * the extra condition here might be needed.
1686 if (non_acm_ac >= IEEE80211_NUM_ACS)
1687 non_acm_ac = IEEE80211_AC_BK;
1688 if (drv_conf_tx(local, sdata, ac,
1689 &sdata->tx_conf[non_acm_ac]))
1691 "failed to set TX queue parameters for queue %d\n",
1693 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1695 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1696 tx_tspec->time_slice_start + HZ - now + 1);
1698 case TX_TSPEC_ACTION_NONE:
1707 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1709 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1710 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1713 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1715 struct ieee80211_sub_if_data *sdata;
1717 sdata = container_of(work, struct ieee80211_sub_if_data,
1718 u.mgd.tx_tspec_wk.work);
1719 ieee80211_sta_handle_tspec_ac_params(sdata);
1723 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1724 struct ieee80211_sub_if_data *sdata,
1725 const u8 *wmm_param, size_t wmm_param_len)
1727 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1728 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1732 u8 uapsd_queues = 0;
1734 if (!local->ops->conf_tx)
1737 if (local->hw.queues < IEEE80211_NUM_ACS)
1743 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1746 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1747 uapsd_queues = ifmgd->uapsd_queues;
1749 count = wmm_param[6] & 0x0f;
1750 if (count == ifmgd->wmm_last_param_set)
1752 ifmgd->wmm_last_param_set = count;
1754 pos = wmm_param + 8;
1755 left = wmm_param_len - 8;
1757 memset(¶ms, 0, sizeof(params));
1760 for (; left >= 4; left -= 4, pos += 4) {
1761 int aci = (pos[0] >> 5) & 0x03;
1762 int acm = (pos[0] >> 4) & 0x01;
1767 ac = IEEE80211_AC_BK;
1769 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1770 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1774 ac = IEEE80211_AC_VI;
1776 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1777 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1781 ac = IEEE80211_AC_VO;
1783 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1784 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1789 ac = IEEE80211_AC_BE;
1791 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1792 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1797 params[ac].aifs = pos[0] & 0x0f;
1799 if (params[ac].aifs < 2) {
1801 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
1802 params[ac].aifs, aci);
1803 params[ac].aifs = 2;
1805 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1806 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
1807 params[ac].txop = get_unaligned_le16(pos + 2);
1808 params[ac].acm = acm;
1809 params[ac].uapsd = uapsd;
1811 if (params[ac].cw_min > params[ac].cw_max) {
1813 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
1814 params[ac].cw_min, params[ac].cw_max, aci);
1819 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1821 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1823 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
1824 params[ac].txop, params[ac].uapsd,
1825 ifmgd->tx_tspec[ac].downgraded);
1826 sdata->tx_conf[ac] = params[ac];
1827 if (!ifmgd->tx_tspec[ac].downgraded &&
1828 drv_conf_tx(local, sdata, ac, ¶ms[ac]))
1830 "failed to set TX queue parameters for AC %d\n",
1834 /* enable WMM or activate new settings */
1835 sdata->vif.bss_conf.qos = true;
1839 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1841 lockdep_assert_held(&sdata->local->mtx);
1843 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1844 ieee80211_run_deferred_scan(sdata->local);
1847 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1849 mutex_lock(&sdata->local->mtx);
1850 __ieee80211_stop_poll(sdata);
1851 mutex_unlock(&sdata->local->mtx);
1854 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1855 u16 capab, bool erp_valid, u8 erp)
1857 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1858 struct ieee80211_supported_band *sband;
1860 bool use_protection;
1861 bool use_short_preamble;
1862 bool use_short_slot;
1864 sband = ieee80211_get_sband(sdata);
1869 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1870 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1872 use_protection = false;
1873 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1876 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1877 if (sband->band == NL80211_BAND_5GHZ)
1878 use_short_slot = true;
1880 if (use_protection != bss_conf->use_cts_prot) {
1881 bss_conf->use_cts_prot = use_protection;
1882 changed |= BSS_CHANGED_ERP_CTS_PROT;
1885 if (use_short_preamble != bss_conf->use_short_preamble) {
1886 bss_conf->use_short_preamble = use_short_preamble;
1887 changed |= BSS_CHANGED_ERP_PREAMBLE;
1890 if (use_short_slot != bss_conf->use_short_slot) {
1891 bss_conf->use_short_slot = use_short_slot;
1892 changed |= BSS_CHANGED_ERP_SLOT;
1898 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1899 struct cfg80211_bss *cbss,
1900 u32 bss_info_changed)
1902 struct ieee80211_bss *bss = (void *)cbss->priv;
1903 struct ieee80211_local *local = sdata->local;
1904 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1906 bss_info_changed |= BSS_CHANGED_ASSOC;
1907 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1908 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1910 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1911 beacon_loss_count * bss_conf->beacon_int));
1913 sdata->u.mgd.associated = cbss;
1914 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1916 ieee80211_check_rate_mask(sdata);
1918 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1920 if (sdata->vif.p2p ||
1921 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
1922 const struct cfg80211_bss_ies *ies;
1925 ies = rcu_dereference(cbss->ies);
1929 ret = cfg80211_get_p2p_attr(
1930 ies->data, ies->len,
1931 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1932 (u8 *) &bss_conf->p2p_noa_attr,
1933 sizeof(bss_conf->p2p_noa_attr));
1935 sdata->u.mgd.p2p_noa_index =
1936 bss_conf->p2p_noa_attr.index;
1937 bss_info_changed |= BSS_CHANGED_P2P_PS;
1943 /* just to be sure */
1944 ieee80211_stop_poll(sdata);
1946 ieee80211_led_assoc(local, 1);
1948 if (sdata->u.mgd.have_beacon) {
1950 * If the AP is buggy we may get here with no DTIM period
1951 * known, so assume it's 1 which is the only safe assumption
1952 * in that case, although if the TIM IE is broken powersave
1953 * probably just won't work at all.
1955 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1956 bss_conf->beacon_rate = bss->beacon_rate;
1957 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1959 bss_conf->beacon_rate = NULL;
1960 bss_conf->dtim_period = 0;
1963 bss_conf->assoc = 1;
1965 /* Tell the driver to monitor connection quality (if supported) */
1966 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1967 bss_conf->cqm_rssi_thold)
1968 bss_info_changed |= BSS_CHANGED_CQM;
1970 /* Enable ARP filtering */
1971 if (bss_conf->arp_addr_cnt)
1972 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1974 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1976 mutex_lock(&local->iflist_mtx);
1977 ieee80211_recalc_ps(local);
1978 mutex_unlock(&local->iflist_mtx);
1980 ieee80211_recalc_smps(sdata);
1981 ieee80211_recalc_ps_vif(sdata);
1983 netif_carrier_on(sdata->dev);
1986 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1987 u16 stype, u16 reason, bool tx,
1990 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1991 struct ieee80211_local *local = sdata->local;
1994 sdata_assert_lock(sdata);
1996 if (WARN_ON_ONCE(tx && !frame_buf))
1999 if (WARN_ON(!ifmgd->associated))
2002 ieee80211_stop_poll(sdata);
2004 ifmgd->associated = NULL;
2005 netif_carrier_off(sdata->dev);
2008 * if we want to get out of ps before disassoc (why?) we have
2009 * to do it before sending disassoc, as otherwise the null-packet
2012 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2013 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2014 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2016 local->ps_sdata = NULL;
2018 /* disable per-vif ps */
2019 ieee80211_recalc_ps_vif(sdata);
2021 /* make sure ongoing transmission finishes */
2025 * drop any frame before deauth/disassoc, this can be data or
2026 * management frame. Since we are disconnecting, we should not
2027 * insist sending these frames which can take time and delay
2028 * the disconnection and possible the roaming.
2031 ieee80211_flush_queues(local, sdata, true);
2033 /* deauthenticate/disassociate now */
2034 if (tx || frame_buf)
2035 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2036 reason, tx, frame_buf);
2038 /* flush out frame - make sure the deauth was actually sent */
2040 ieee80211_flush_queues(local, sdata, false);
2042 /* clear bssid only after building the needed mgmt frames */
2043 eth_zero_addr(ifmgd->bssid);
2045 /* remove AP and TDLS peers */
2046 sta_info_flush(sdata);
2048 /* finally reset all BSS / config parameters */
2049 changed |= ieee80211_reset_erp_info(sdata);
2051 ieee80211_led_assoc(local, 0);
2052 changed |= BSS_CHANGED_ASSOC;
2053 sdata->vif.bss_conf.assoc = false;
2055 ifmgd->p2p_noa_index = -1;
2056 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2057 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2059 /* on the next assoc, re-program HT/VHT parameters */
2060 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2061 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2062 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2063 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2065 /* reset MU-MIMO ownership and group data */
2066 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2067 sizeof(sdata->vif.bss_conf.mu_group.membership));
2068 memset(sdata->vif.bss_conf.mu_group.position, 0,
2069 sizeof(sdata->vif.bss_conf.mu_group.position));
2070 changed |= BSS_CHANGED_MU_GROUPS;
2071 sdata->vif.mu_mimo_owner = false;
2073 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2075 del_timer_sync(&local->dynamic_ps_timer);
2076 cancel_work_sync(&local->dynamic_ps_enable_work);
2078 /* Disable ARP filtering */
2079 if (sdata->vif.bss_conf.arp_addr_cnt)
2080 changed |= BSS_CHANGED_ARP_FILTER;
2082 sdata->vif.bss_conf.qos = false;
2083 changed |= BSS_CHANGED_QOS;
2085 /* The BSSID (not really interesting) and HT changed */
2086 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2087 ieee80211_bss_info_change_notify(sdata, changed);
2089 /* disassociated - set to defaults now */
2090 ieee80211_set_wmm_default(sdata, false, false);
2092 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2093 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2094 del_timer_sync(&sdata->u.mgd.timer);
2095 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2097 sdata->vif.bss_conf.dtim_period = 0;
2098 sdata->vif.bss_conf.beacon_rate = NULL;
2100 ifmgd->have_beacon = false;
2103 mutex_lock(&local->mtx);
2104 ieee80211_vif_release_channel(sdata);
2106 sdata->vif.csa_active = false;
2107 ifmgd->csa_waiting_bcn = false;
2108 ifmgd->csa_ignored_same_chan = false;
2109 if (sdata->csa_block_tx) {
2110 ieee80211_wake_vif_queues(local, sdata,
2111 IEEE80211_QUEUE_STOP_REASON_CSA);
2112 sdata->csa_block_tx = false;
2114 mutex_unlock(&local->mtx);
2116 /* existing TX TSPEC sessions no longer exist */
2117 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2118 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2120 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2123 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2124 struct ieee80211_hdr *hdr)
2127 * We can postpone the mgd.timer whenever receiving unicast frames
2128 * from AP because we know that the connection is working both ways
2129 * at that time. But multicast frames (and hence also beacons) must
2130 * be ignored here, because we need to trigger the timer during
2131 * data idle periods for sending the periodic probe request to the
2132 * AP we're connected to.
2134 if (is_multicast_ether_addr(hdr->addr1))
2137 ieee80211_sta_reset_conn_monitor(sdata);
2140 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2142 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2143 struct ieee80211_local *local = sdata->local;
2145 mutex_lock(&local->mtx);
2146 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2149 __ieee80211_stop_poll(sdata);
2151 mutex_lock(&local->iflist_mtx);
2152 ieee80211_recalc_ps(local);
2153 mutex_unlock(&local->iflist_mtx);
2155 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2159 * We've received a probe response, but are not sure whether
2160 * we have or will be receiving any beacons or data, so let's
2161 * schedule the timers again, just in case.
2163 ieee80211_sta_reset_beacon_monitor(sdata);
2165 mod_timer(&ifmgd->conn_mon_timer,
2166 round_jiffies_up(jiffies +
2167 IEEE80211_CONNECTION_IDLE_TIME));
2169 mutex_unlock(&local->mtx);
2172 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2173 struct ieee80211_hdr *hdr,
2176 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2177 u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2178 int ac = ieee80211_ac_from_tid(tid);
2179 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2180 unsigned long now = jiffies;
2182 if (likely(!tx_tspec->admitted_time))
2185 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2186 tx_tspec->consumed_tx_time = 0;
2187 tx_tspec->time_slice_start = now;
2189 if (tx_tspec->downgraded) {
2190 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2191 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2195 if (tx_tspec->downgraded)
2198 tx_tspec->consumed_tx_time += tx_time;
2200 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2201 tx_tspec->downgraded = true;
2202 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2203 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2207 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2208 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2210 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2212 if (!ieee80211_is_data(hdr->frame_control))
2215 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2216 sdata->u.mgd.probe_send_count > 0) {
2218 ieee80211_sta_reset_conn_monitor(sdata);
2220 sdata->u.mgd.nullfunc_failed = true;
2221 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2226 ieee80211_sta_reset_conn_monitor(sdata);
2229 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2231 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2233 u8 *dst = ifmgd->associated->bssid;
2234 u8 unicast_limit = max(1, max_probe_tries - 3);
2235 struct sta_info *sta;
2238 * Try sending broadcast probe requests for the last three
2239 * probe requests after the first ones failed since some
2240 * buggy APs only support broadcast probe requests.
2242 if (ifmgd->probe_send_count >= unicast_limit)
2246 * When the hardware reports an accurate Tx ACK status, it's
2247 * better to send a nullfunc frame instead of a probe request,
2248 * as it will kick us off the AP quickly if we aren't associated
2249 * anymore. The timeout will be reset if the frame is ACKed by
2252 ifmgd->probe_send_count++;
2255 mutex_lock(&sdata->local->sta_mtx);
2256 sta = sta_info_get(sdata, dst);
2258 ieee80211_check_fast_rx(sta);
2259 mutex_unlock(&sdata->local->sta_mtx);
2262 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2263 ifmgd->nullfunc_failed = false;
2264 ieee80211_send_nullfunc(sdata->local, sdata, false);
2269 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2270 if (WARN_ON_ONCE(ssid == NULL))
2275 ieee80211_send_probe_req(sdata, sdata->vif.addr, dst,
2276 ssid + 2, ssid_len, NULL,
2277 0, (u32) -1, true, 0,
2278 ifmgd->associated->channel, false);
2282 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2283 run_again(sdata, ifmgd->probe_timeout);
2286 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2289 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2290 bool already = false;
2292 if (!ieee80211_sdata_running(sdata))
2297 if (!ifmgd->associated)
2300 mutex_lock(&sdata->local->mtx);
2302 if (sdata->local->tmp_channel || sdata->local->scanning) {
2303 mutex_unlock(&sdata->local->mtx);
2308 mlme_dbg_ratelimited(sdata,
2309 "detected beacon loss from AP (missed %d beacons) - probing\n",
2312 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2316 * The driver/our work has already reported this event or the
2317 * connection monitoring has kicked in and we have already sent
2318 * a probe request. Or maybe the AP died and the driver keeps
2319 * reporting until we disassociate...
2321 * In either case we have to ignore the current call to this
2322 * function (except for setting the correct probe reason bit)
2323 * because otherwise we would reset the timer every time and
2324 * never check whether we received a probe response!
2326 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2329 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2331 mutex_unlock(&sdata->local->mtx);
2336 mutex_lock(&sdata->local->iflist_mtx);
2337 ieee80211_recalc_ps(sdata->local);
2338 mutex_unlock(&sdata->local->iflist_mtx);
2340 ifmgd->probe_send_count = 0;
2341 ieee80211_mgd_probe_ap_send(sdata);
2343 sdata_unlock(sdata);
2346 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2347 struct ieee80211_vif *vif)
2349 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2350 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2351 struct cfg80211_bss *cbss;
2352 struct sk_buff *skb;
2356 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2359 sdata_assert_lock(sdata);
2361 if (ifmgd->associated)
2362 cbss = ifmgd->associated;
2363 else if (ifmgd->auth_data)
2364 cbss = ifmgd->auth_data->bss;
2365 else if (ifmgd->assoc_data)
2366 cbss = ifmgd->assoc_data->bss;
2371 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2372 if (WARN_ON_ONCE(ssid == NULL))
2377 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2378 (u32) -1, cbss->channel,
2385 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2387 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2388 const u8 *buf, size_t len, bool tx,
2391 struct ieee80211_event event = {
2393 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2394 .u.mlme.reason = reason,
2398 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2400 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2402 drv_event_callback(sdata->local, sdata, &event);
2405 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2407 struct ieee80211_local *local = sdata->local;
2408 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2409 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2412 if (!ifmgd->associated) {
2413 sdata_unlock(sdata);
2417 /* AP is probably out of range (or not reachable for another reason) so
2418 * remove the bss struct for that AP.
2420 cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated);
2422 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2423 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2425 mutex_lock(&local->mtx);
2426 sdata->vif.csa_active = false;
2427 ifmgd->csa_waiting_bcn = false;
2428 if (sdata->csa_block_tx) {
2429 ieee80211_wake_vif_queues(local, sdata,
2430 IEEE80211_QUEUE_STOP_REASON_CSA);
2431 sdata->csa_block_tx = false;
2433 mutex_unlock(&local->mtx);
2435 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
2436 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2438 sdata_unlock(sdata);
2441 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2443 struct ieee80211_sub_if_data *sdata =
2444 container_of(work, struct ieee80211_sub_if_data,
2445 u.mgd.beacon_connection_loss_work);
2446 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2448 if (ifmgd->associated)
2449 ifmgd->beacon_loss_count++;
2451 if (ifmgd->connection_loss) {
2452 sdata_info(sdata, "Connection to AP %pM lost\n",
2454 __ieee80211_disconnect(sdata);
2456 ieee80211_mgd_probe_ap(sdata, true);
2460 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2462 struct ieee80211_sub_if_data *sdata =
2463 container_of(work, struct ieee80211_sub_if_data,
2464 u.mgd.csa_connection_drop_work);
2466 __ieee80211_disconnect(sdata);
2469 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2471 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2472 struct ieee80211_hw *hw = &sdata->local->hw;
2474 trace_api_beacon_loss(sdata);
2476 sdata->u.mgd.connection_loss = false;
2477 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2479 EXPORT_SYMBOL(ieee80211_beacon_loss);
2481 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2483 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2484 struct ieee80211_hw *hw = &sdata->local->hw;
2486 trace_api_connection_loss(sdata);
2488 sdata->u.mgd.connection_loss = true;
2489 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2491 EXPORT_SYMBOL(ieee80211_connection_loss);
2494 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2497 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2499 sdata_assert_lock(sdata);
2503 * we are not authenticated yet, the only timer that could be
2504 * running is the timeout for the authentication response which
2505 * which is not relevant anymore.
2507 del_timer_sync(&sdata->u.mgd.timer);
2508 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2510 eth_zero_addr(sdata->u.mgd.bssid);
2511 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2512 sdata->u.mgd.flags = 0;
2513 mutex_lock(&sdata->local->mtx);
2514 ieee80211_vif_release_channel(sdata);
2515 mutex_unlock(&sdata->local->mtx);
2518 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2520 sdata->u.mgd.auth_data = NULL;
2523 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2524 bool assoc, bool abandon)
2526 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2528 sdata_assert_lock(sdata);
2532 * we are not associated yet, the only timer that could be
2533 * running is the timeout for the association response which
2534 * which is not relevant anymore.
2536 del_timer_sync(&sdata->u.mgd.timer);
2537 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2539 eth_zero_addr(sdata->u.mgd.bssid);
2540 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2541 sdata->u.mgd.flags = 0;
2542 sdata->vif.mu_mimo_owner = false;
2544 mutex_lock(&sdata->local->mtx);
2545 ieee80211_vif_release_channel(sdata);
2546 mutex_unlock(&sdata->local->mtx);
2549 cfg80211_abandon_assoc(sdata->dev, assoc_data->bss);
2553 sdata->u.mgd.assoc_data = NULL;
2556 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2557 struct ieee80211_mgmt *mgmt, size_t len)
2559 struct ieee80211_local *local = sdata->local;
2560 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2562 struct ieee802_11_elems elems;
2565 pos = mgmt->u.auth.variable;
2566 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2567 if (!elems.challenge)
2569 auth_data->expected_transaction = 4;
2570 drv_mgd_prepare_tx(sdata->local, sdata);
2571 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2572 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2573 IEEE80211_TX_INTFL_MLME_CONN_TX;
2574 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2575 elems.challenge - 2, elems.challenge_len + 2,
2576 auth_data->bss->bssid, auth_data->bss->bssid,
2577 auth_data->key, auth_data->key_len,
2578 auth_data->key_idx, tx_flags);
2581 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2582 struct ieee80211_mgmt *mgmt, size_t len)
2584 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2586 u16 auth_alg, auth_transaction, status_code;
2587 struct sta_info *sta;
2588 struct ieee80211_event event = {
2590 .u.mlme.data = AUTH_EVENT,
2593 sdata_assert_lock(sdata);
2598 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2601 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2603 if (!ether_addr_equal(bssid, mgmt->bssid))
2606 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2607 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2608 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2610 if (auth_alg != ifmgd->auth_data->algorithm ||
2611 auth_transaction != ifmgd->auth_data->expected_transaction) {
2612 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2613 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2615 ifmgd->auth_data->expected_transaction);
2619 if (status_code != WLAN_STATUS_SUCCESS) {
2620 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2621 mgmt->sa, status_code);
2622 ieee80211_destroy_auth_data(sdata, false);
2623 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2624 event.u.mlme.status = MLME_DENIED;
2625 event.u.mlme.reason = status_code;
2626 drv_event_callback(sdata->local, sdata, &event);
2630 switch (ifmgd->auth_data->algorithm) {
2631 case WLAN_AUTH_OPEN:
2632 case WLAN_AUTH_LEAP:
2635 case WLAN_AUTH_FILS_SK:
2636 case WLAN_AUTH_FILS_SK_PFS:
2637 case WLAN_AUTH_FILS_PK:
2639 case WLAN_AUTH_SHARED_KEY:
2640 if (ifmgd->auth_data->expected_transaction != 4) {
2641 ieee80211_auth_challenge(sdata, mgmt, len);
2642 /* need another frame */
2647 WARN_ONCE(1, "invalid auth alg %d",
2648 ifmgd->auth_data->algorithm);
2652 event.u.mlme.status = MLME_SUCCESS;
2653 drv_event_callback(sdata->local, sdata, &event);
2654 sdata_info(sdata, "authenticated\n");
2655 ifmgd->auth_data->done = true;
2656 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2657 ifmgd->auth_data->timeout_started = true;
2658 run_again(sdata, ifmgd->auth_data->timeout);
2660 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2661 ifmgd->auth_data->expected_transaction != 2) {
2663 * Report auth frame to user space for processing since another
2664 * round of Authentication frames is still needed.
2666 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2670 /* move station state to auth */
2671 mutex_lock(&sdata->local->sta_mtx);
2672 sta = sta_info_get(sdata, bssid);
2674 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2677 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2678 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2681 mutex_unlock(&sdata->local->sta_mtx);
2683 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2686 mutex_unlock(&sdata->local->sta_mtx);
2687 /* ignore frame -- wait for timeout */
2690 #define case_WLAN(type) \
2691 case WLAN_REASON_##type: return #type
2693 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2695 switch (reason_code) {
2696 case_WLAN(UNSPECIFIED);
2697 case_WLAN(PREV_AUTH_NOT_VALID);
2698 case_WLAN(DEAUTH_LEAVING);
2699 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2700 case_WLAN(DISASSOC_AP_BUSY);
2701 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2702 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2703 case_WLAN(DISASSOC_STA_HAS_LEFT);
2704 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2705 case_WLAN(DISASSOC_BAD_POWER);
2706 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2707 case_WLAN(INVALID_IE);
2708 case_WLAN(MIC_FAILURE);
2709 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2710 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2711 case_WLAN(IE_DIFFERENT);
2712 case_WLAN(INVALID_GROUP_CIPHER);
2713 case_WLAN(INVALID_PAIRWISE_CIPHER);
2714 case_WLAN(INVALID_AKMP);
2715 case_WLAN(UNSUPP_RSN_VERSION);
2716 case_WLAN(INVALID_RSN_IE_CAP);
2717 case_WLAN(IEEE8021X_FAILED);
2718 case_WLAN(CIPHER_SUITE_REJECTED);
2719 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2720 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2721 case_WLAN(DISASSOC_LOW_ACK);
2722 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2723 case_WLAN(QSTA_LEAVE_QBSS);
2724 case_WLAN(QSTA_NOT_USE);
2725 case_WLAN(QSTA_REQUIRE_SETUP);
2726 case_WLAN(QSTA_TIMEOUT);
2727 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2728 case_WLAN(MESH_PEER_CANCELED);
2729 case_WLAN(MESH_MAX_PEERS);
2730 case_WLAN(MESH_CONFIG);
2731 case_WLAN(MESH_CLOSE);
2732 case_WLAN(MESH_MAX_RETRIES);
2733 case_WLAN(MESH_CONFIRM_TIMEOUT);
2734 case_WLAN(MESH_INVALID_GTK);
2735 case_WLAN(MESH_INCONSISTENT_PARAM);
2736 case_WLAN(MESH_INVALID_SECURITY);
2737 case_WLAN(MESH_PATH_ERROR);
2738 case_WLAN(MESH_PATH_NOFORWARD);
2739 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2740 case_WLAN(MAC_EXISTS_IN_MBSS);
2741 case_WLAN(MESH_CHAN_REGULATORY);
2742 case_WLAN(MESH_CHAN);
2743 default: return "<unknown>";
2747 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2748 struct ieee80211_mgmt *mgmt, size_t len)
2750 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2751 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2753 sdata_assert_lock(sdata);
2758 if (ifmgd->associated &&
2759 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2760 const u8 *bssid = ifmgd->associated->bssid;
2762 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2764 ieee80211_get_reason_code_string(reason_code));
2766 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2768 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2773 if (ifmgd->assoc_data &&
2774 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2775 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2778 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2780 ieee80211_get_reason_code_string(reason_code));
2782 ieee80211_destroy_assoc_data(sdata, false, true);
2784 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2790 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2791 struct ieee80211_mgmt *mgmt, size_t len)
2793 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2796 sdata_assert_lock(sdata);
2801 if (!ifmgd->associated ||
2802 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2805 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2807 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
2808 mgmt->sa, reason_code,
2809 ieee80211_get_reason_code_string(reason_code));
2811 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2813 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
2816 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2817 u8 *supp_rates, unsigned int supp_rates_len,
2818 u32 *rates, u32 *basic_rates,
2819 bool *have_higher_than_11mbit,
2820 int *min_rate, int *min_rate_index,
2821 int shift, u32 rate_flags)
2825 for (i = 0; i < supp_rates_len; i++) {
2826 int rate = supp_rates[i] & 0x7f;
2827 bool is_basic = !!(supp_rates[i] & 0x80);
2829 if ((rate * 5 * (1 << shift)) > 110)
2830 *have_higher_than_11mbit = true;
2833 * Skip HT and VHT BSS membership selectors since they're not
2836 * Note: Even though the membership selector and the basic
2837 * rate flag share the same bit, they are not exactly
2840 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
2841 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY))
2844 for (j = 0; j < sband->n_bitrates; j++) {
2845 struct ieee80211_rate *br;
2848 br = &sband->bitrates[j];
2849 if ((rate_flags & br->flags) != rate_flags)
2852 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2853 if (brate == rate) {
2856 *basic_rates |= BIT(j);
2857 if ((rate * 5) < *min_rate) {
2858 *min_rate = rate * 5;
2859 *min_rate_index = j;
2867 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2868 struct cfg80211_bss *cbss,
2869 struct ieee80211_mgmt *mgmt, size_t len)
2871 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2872 struct ieee80211_local *local = sdata->local;
2873 struct ieee80211_supported_band *sband;
2874 struct sta_info *sta;
2876 u16 capab_info, aid;
2877 struct ieee802_11_elems elems;
2878 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2879 const struct cfg80211_bss_ies *bss_ies = NULL;
2880 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2885 /* AssocResp and ReassocResp have identical structure */
2887 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2888 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2890 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2891 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2893 aid &= ~(BIT(15) | BIT(14));
2895 ifmgd->broken_ap = false;
2897 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2898 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2901 ifmgd->broken_ap = true;
2904 pos = mgmt->u.assoc_resp.variable;
2905 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2907 if (!elems.supp_rates) {
2908 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2913 ifmgd->tdls_chan_switch_prohibited =
2914 elems.ext_capab && elems.ext_capab_len >= 5 &&
2915 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2918 * Some APs are erroneously not including some information in their
2919 * (re)association response frames. Try to recover by using the data
2920 * from the beacon or probe response. This seems to afflict mobile
2921 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2922 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2924 if ((assoc_data->wmm && !elems.wmm_param) ||
2925 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2926 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2927 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2928 (!elems.vht_cap_elem || !elems.vht_operation))) {
2929 const struct cfg80211_bss_ies *ies;
2930 struct ieee802_11_elems bss_elems;
2933 ies = rcu_dereference(cbss->ies);
2935 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2941 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2943 if (assoc_data->wmm &&
2944 !elems.wmm_param && bss_elems.wmm_param) {
2945 elems.wmm_param = bss_elems.wmm_param;
2947 "AP bug: WMM param missing from AssocResp\n");
2951 * Also check if we requested HT/VHT, otherwise the AP doesn't
2952 * have to include the IEs in the (re)association response.
2954 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2955 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2956 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2958 "AP bug: HT capability missing from AssocResp\n");
2960 if (!elems.ht_operation && bss_elems.ht_operation &&
2961 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2962 elems.ht_operation = bss_elems.ht_operation;
2964 "AP bug: HT operation missing from AssocResp\n");
2966 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2967 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2968 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2970 "AP bug: VHT capa missing from AssocResp\n");
2972 if (!elems.vht_operation && bss_elems.vht_operation &&
2973 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2974 elems.vht_operation = bss_elems.vht_operation;
2976 "AP bug: VHT operation missing from AssocResp\n");
2981 * We previously checked these in the beacon/probe response, so
2982 * they should be present here. This is just a safety net.
2984 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2985 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2987 "HT AP is missing WMM params or HT capability/operation\n");
2992 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2993 (!elems.vht_cap_elem || !elems.vht_operation)) {
2995 "VHT AP is missing VHT capability/operation\n");
3000 mutex_lock(&sdata->local->sta_mtx);
3002 * station info was already allocated and inserted before
3003 * the association and should be available to us
3005 sta = sta_info_get(sdata, cbss->bssid);
3006 if (WARN_ON(!sta)) {
3007 mutex_unlock(&sdata->local->sta_mtx);
3012 sband = ieee80211_get_sband(sdata);
3014 mutex_unlock(&sdata->local->sta_mtx);
3019 /* Set up internal HT/VHT capabilities */
3020 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3021 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3022 elems.ht_cap_elem, sta);
3024 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3025 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3026 elems.vht_cap_elem, sta);
3029 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3030 * in their association response, so ignore that data for our own
3031 * configuration. If it changed since the last beacon, we'll get the
3032 * next beacon and update then.
3036 * If an operating mode notification IE is present, override the
3037 * NSS calculation (that would be done in rate_control_rate_init())
3038 * and use the # of streams from that element.
3040 if (elems.opmode_notif &&
3041 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3044 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3045 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3047 sta->sta.rx_nss = nss;
3050 rate_control_rate_init(sta);
3052 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3053 set_sta_flag(sta, WLAN_STA_MFP);
3054 sta->sta.mfp = true;
3056 sta->sta.mfp = false;
3059 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3061 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3062 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3063 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3066 "failed to move station %pM to desired state\n",
3068 WARN_ON(__sta_info_destroy(sta));
3069 mutex_unlock(&sdata->local->sta_mtx);
3074 mutex_unlock(&sdata->local->sta_mtx);
3077 * Always handle WMM once after association regardless
3078 * of the first value the AP uses. Setting -1 here has
3079 * that effect because the AP values is an unsigned
3082 ifmgd->wmm_last_param_set = -1;
3084 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3085 ieee80211_set_wmm_default(sdata, false, false);
3086 } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3087 elems.wmm_param_len)) {
3088 /* still enable QoS since we might have HT/VHT */
3089 ieee80211_set_wmm_default(sdata, false, true);
3090 /* set the disable-WMM flag in this case to disable
3091 * tracking WMM parameter changes in the beacon if
3092 * the parameters weren't actually valid. Doing so
3093 * avoids changing parameters very strangely when
3094 * the AP is going back and forth between valid and
3095 * invalid parameters.
3097 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3099 changed |= BSS_CHANGED_QOS;
3101 if (elems.max_idle_period_ie) {
3102 bss_conf->max_idle_period =
3103 le16_to_cpu(elems.max_idle_period_ie->max_idle_period);
3104 bss_conf->protected_keep_alive =
3105 !!(elems.max_idle_period_ie->idle_options &
3106 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
3107 changed |= BSS_CHANGED_KEEP_ALIVE;
3109 bss_conf->max_idle_period = 0;
3110 bss_conf->protected_keep_alive = false;
3113 /* set AID and assoc capability,
3114 * ieee80211_set_associated() will tell the driver */
3115 bss_conf->aid = aid;
3116 bss_conf->assoc_capability = capab_info;
3117 ieee80211_set_associated(sdata, cbss, changed);
3120 * If we're using 4-addr mode, let the AP know that we're
3121 * doing so, so that it can create the STA VLAN on its side
3123 if (ifmgd->use_4addr)
3124 ieee80211_send_4addr_nullfunc(local, sdata);
3127 * Start timer to probe the connection to the AP now.
3128 * Also start the timer that will detect beacon loss.
3130 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3131 ieee80211_sta_reset_beacon_monitor(sdata);
3139 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3140 struct ieee80211_mgmt *mgmt,
3143 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3144 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3145 u16 capab_info, status_code, aid;
3146 struct ieee802_11_elems elems;
3147 int ac, uapsd_queues = -1;
3150 struct cfg80211_bss *bss;
3151 struct ieee80211_event event = {
3153 .u.mlme.data = ASSOC_EVENT,
3156 sdata_assert_lock(sdata);
3160 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3164 * AssocResp and ReassocResp have identical structure, so process both
3165 * of them in this function.
3171 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
3172 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3173 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3174 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3177 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3178 reassoc ? "Rea" : "A", mgmt->sa,
3179 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3181 if (assoc_data->fils_kek_len &&
3182 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
3185 pos = mgmt->u.assoc_resp.variable;
3186 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3188 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3189 elems.timeout_int &&
3190 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3192 tu = le32_to_cpu(elems.timeout_int->value);
3193 ms = tu * 1024 / 1000;
3195 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3197 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3198 assoc_data->timeout_started = true;
3199 if (ms > IEEE80211_ASSOC_TIMEOUT)
3200 run_again(sdata, assoc_data->timeout);
3204 bss = assoc_data->bss;
3206 if (status_code != WLAN_STATUS_SUCCESS) {
3207 sdata_info(sdata, "%pM denied association (code=%d)\n",
3208 mgmt->sa, status_code);
3209 ieee80211_destroy_assoc_data(sdata, false, false);
3210 event.u.mlme.status = MLME_DENIED;
3211 event.u.mlme.reason = status_code;
3212 drv_event_callback(sdata->local, sdata, &event);
3214 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3215 /* oops -- internal error -- send timeout for now */
3216 ieee80211_destroy_assoc_data(sdata, false, false);
3217 cfg80211_assoc_timeout(sdata->dev, bss);
3220 event.u.mlme.status = MLME_SUCCESS;
3221 drv_event_callback(sdata->local, sdata, &event);
3222 sdata_info(sdata, "associated\n");
3225 * destroy assoc_data afterwards, as otherwise an idle
3226 * recalc after assoc_data is NULL but before associated
3227 * is set can cause the interface to go idle
3229 ieee80211_destroy_assoc_data(sdata, true, false);
3231 /* get uapsd queues configuration */
3233 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3234 if (sdata->tx_conf[ac].uapsd)
3235 uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
3238 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3241 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3242 struct ieee80211_mgmt *mgmt, size_t len,
3243 struct ieee80211_rx_status *rx_status,
3244 struct ieee802_11_elems *elems)
3246 struct ieee80211_local *local = sdata->local;
3247 struct ieee80211_bss *bss;
3248 struct ieee80211_channel *channel;
3250 sdata_assert_lock(sdata);
3252 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3256 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3259 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3260 ieee80211_rx_bss_put(local, bss);
3265 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3266 struct sk_buff *skb)
3268 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3269 struct ieee80211_if_managed *ifmgd;
3270 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3271 size_t baselen, len = skb->len;
3272 struct ieee802_11_elems elems;
3274 ifmgd = &sdata->u.mgd;
3276 sdata_assert_lock(sdata);
3278 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3279 return; /* ignore ProbeResp to foreign address */
3281 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3285 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3288 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3290 if (ifmgd->associated &&
3291 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3292 ieee80211_reset_ap_probe(sdata);
3296 * This is the canonical list of information elements we care about,
3297 * the filter code also gives us all changes to the Microsoft OUI
3298 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3299 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3300 * changes to requested client power.
3302 * We implement beacon filtering in software since that means we can
3303 * avoid processing the frame here and in cfg80211, and userspace
3304 * will not be able to tell whether the hardware supports it or not.
3306 * XXX: This list needs to be dynamic -- userspace needs to be able to
3307 * add items it requires. It also needs to be able to tell us to
3308 * look out for other vendor IEs.
3310 static const u64 care_about_ies =
3311 (1ULL << WLAN_EID_COUNTRY) |
3312 (1ULL << WLAN_EID_ERP_INFO) |
3313 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3314 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3315 (1ULL << WLAN_EID_HT_CAPABILITY) |
3316 (1ULL << WLAN_EID_HT_OPERATION) |
3317 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3319 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3320 struct ieee80211_mgmt *mgmt, size_t len,
3321 struct ieee80211_rx_status *rx_status)
3323 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3324 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3326 struct ieee802_11_elems elems;
3327 struct ieee80211_local *local = sdata->local;
3328 struct ieee80211_chanctx_conf *chanctx_conf;
3329 struct ieee80211_channel *chan;
3330 struct sta_info *sta;
3336 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3338 sdata_assert_lock(sdata);
3340 /* Process beacon from the current BSS */
3341 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3346 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3347 if (!chanctx_conf) {
3352 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3356 chan = chanctx_conf->def.chan;
3359 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3360 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3361 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3362 len - baselen, false, &elems);
3364 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3365 if (elems.tim && !elems.parse_error) {
3366 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3367 ifmgd->dtim_period = tim_ie->dtim_period;
3369 ifmgd->have_beacon = true;
3370 ifmgd->assoc_data->need_beacon = false;
3371 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3372 sdata->vif.bss_conf.sync_tsf =
3373 le64_to_cpu(mgmt->u.beacon.timestamp);
3374 sdata->vif.bss_conf.sync_device_ts =
3375 rx_status->device_timestamp;
3377 sdata->vif.bss_conf.sync_dtim_count =
3378 elems.tim->dtim_count;
3380 sdata->vif.bss_conf.sync_dtim_count = 0;
3382 /* continue assoc process */
3383 ifmgd->assoc_data->timeout = jiffies;
3384 ifmgd->assoc_data->timeout_started = true;
3385 run_again(sdata, ifmgd->assoc_data->timeout);
3389 if (!ifmgd->associated ||
3390 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3392 bssid = ifmgd->associated->bssid;
3394 /* Track average RSSI from the Beacon frames of the current AP */
3395 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3396 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3397 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3398 ifmgd->last_cqm_event_signal = 0;
3399 ifmgd->count_beacon_signal = 1;
3400 ifmgd->last_ave_beacon_signal = 0;
3402 ifmgd->count_beacon_signal++;
3405 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3407 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3408 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3409 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3410 int last_sig = ifmgd->last_ave_beacon_signal;
3411 struct ieee80211_event event = {
3416 * if signal crosses either of the boundaries, invoke callback
3417 * with appropriate parameters
3419 if (sig > ifmgd->rssi_max_thold &&
3420 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3421 ifmgd->last_ave_beacon_signal = sig;
3422 event.u.rssi.data = RSSI_EVENT_HIGH;
3423 drv_event_callback(local, sdata, &event);
3424 } else if (sig < ifmgd->rssi_min_thold &&
3425 (last_sig >= ifmgd->rssi_max_thold ||
3427 ifmgd->last_ave_beacon_signal = sig;
3428 event.u.rssi.data = RSSI_EVENT_LOW;
3429 drv_event_callback(local, sdata, &event);
3433 if (bss_conf->cqm_rssi_thold &&
3434 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3435 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3436 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3437 int last_event = ifmgd->last_cqm_event_signal;
3438 int thold = bss_conf->cqm_rssi_thold;
3439 int hyst = bss_conf->cqm_rssi_hyst;
3442 (last_event == 0 || sig < last_event - hyst)) {
3443 ifmgd->last_cqm_event_signal = sig;
3444 ieee80211_cqm_rssi_notify(
3446 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3448 } else if (sig > thold &&
3449 (last_event == 0 || sig > last_event + hyst)) {
3450 ifmgd->last_cqm_event_signal = sig;
3451 ieee80211_cqm_rssi_notify(
3453 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3458 if (bss_conf->cqm_rssi_low &&
3459 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3460 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3461 int last_event = ifmgd->last_cqm_event_signal;
3462 int low = bss_conf->cqm_rssi_low;
3463 int high = bss_conf->cqm_rssi_high;
3466 (last_event == 0 || last_event >= low)) {
3467 ifmgd->last_cqm_event_signal = sig;
3468 ieee80211_cqm_rssi_notify(
3470 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3472 } else if (sig > high &&
3473 (last_event == 0 || last_event <= high)) {
3474 ifmgd->last_cqm_event_signal = sig;
3475 ieee80211_cqm_rssi_notify(
3477 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3482 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3483 mlme_dbg_ratelimited(sdata,
3484 "cancelling AP probe due to a received beacon\n");
3485 ieee80211_reset_ap_probe(sdata);
3489 * Push the beacon loss detection into the future since
3490 * we are processing a beacon from the AP just now.
3492 ieee80211_sta_reset_beacon_monitor(sdata);
3494 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3495 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3496 len - baselen, false, &elems,
3497 care_about_ies, ncrc);
3499 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
3500 ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
3501 if (local->hw.conf.dynamic_ps_timeout > 0) {
3502 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3503 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3504 ieee80211_hw_config(local,
3505 IEEE80211_CONF_CHANGE_PS);
3507 ieee80211_send_nullfunc(local, sdata, false);
3508 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3509 local->pspolling = true;
3512 * Here is assumed that the driver will be
3513 * able to send ps-poll frame and receive a
3514 * response even though power save mode is
3515 * enabled, but some drivers might require
3516 * to disable power save here. This needs
3517 * to be investigated.
3519 ieee80211_send_pspoll(local, sdata);
3523 if (sdata->vif.p2p ||
3524 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
3525 struct ieee80211_p2p_noa_attr noa = {};
3528 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3530 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3531 (u8 *) &noa, sizeof(noa));
3533 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3534 /* valid noa_attr and index changed */
3535 sdata->u.mgd.p2p_noa_index = noa.index;
3536 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3537 changed |= BSS_CHANGED_P2P_PS;
3539 * make sure we update all information, the CRC
3540 * mechanism doesn't look at P2P attributes.
3542 ifmgd->beacon_crc_valid = false;
3544 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3545 /* noa_attr not found and we had valid noa_attr before */
3546 sdata->u.mgd.p2p_noa_index = -1;
3547 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3548 changed |= BSS_CHANGED_P2P_PS;
3549 ifmgd->beacon_crc_valid = false;
3553 if (ifmgd->csa_waiting_bcn)
3554 ieee80211_chswitch_post_beacon(sdata);
3557 * Update beacon timing and dtim count on every beacon appearance. This
3558 * will allow the driver to use the most updated values. Do it before
3559 * comparing this one with last received beacon.
3560 * IMPORTANT: These parameters would possibly be out of sync by the time
3561 * the driver will use them. The synchronized view is currently
3562 * guaranteed only in certain callbacks.
3564 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3565 sdata->vif.bss_conf.sync_tsf =
3566 le64_to_cpu(mgmt->u.beacon.timestamp);
3567 sdata->vif.bss_conf.sync_device_ts =
3568 rx_status->device_timestamp;
3570 sdata->vif.bss_conf.sync_dtim_count =
3571 elems.tim->dtim_count;
3573 sdata->vif.bss_conf.sync_dtim_count = 0;
3576 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3578 ifmgd->beacon_crc = ncrc;
3579 ifmgd->beacon_crc_valid = true;
3581 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3583 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3584 rx_status->device_timestamp,
3587 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3588 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3589 elems.wmm_param_len))
3590 changed |= BSS_CHANGED_QOS;
3593 * If we haven't had a beacon before, tell the driver about the
3594 * DTIM period (and beacon timing if desired) now.
3596 if (!ifmgd->have_beacon) {
3597 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3599 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3601 bss_conf->dtim_period = 1;
3603 changed |= BSS_CHANGED_BEACON_INFO;
3604 ifmgd->have_beacon = true;
3606 mutex_lock(&local->iflist_mtx);
3607 ieee80211_recalc_ps(local);
3608 mutex_unlock(&local->iflist_mtx);
3610 ieee80211_recalc_ps_vif(sdata);
3613 if (elems.erp_info) {
3615 erp_value = elems.erp_info[0];
3619 changed |= ieee80211_handle_bss_capability(sdata,
3620 le16_to_cpu(mgmt->u.beacon.capab_info),
3621 erp_valid, erp_value);
3623 mutex_lock(&local->sta_mtx);
3624 sta = sta_info_get(sdata, bssid);
3626 if (ieee80211_config_bw(sdata, sta,
3627 elems.ht_cap_elem, elems.ht_operation,
3628 elems.vht_operation, bssid, &changed)) {
3629 mutex_unlock(&local->sta_mtx);
3631 "failed to follow AP %pM bandwidth change, disconnect\n",
3633 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3634 WLAN_REASON_DEAUTH_LEAVING,
3636 ieee80211_report_disconnect(sdata, deauth_buf,
3637 sizeof(deauth_buf), true,
3638 WLAN_REASON_DEAUTH_LEAVING);
3642 if (sta && elems.opmode_notif)
3643 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3645 mutex_unlock(&local->sta_mtx);
3647 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3649 elems.country_elem_len,
3650 elems.pwr_constr_elem,
3651 elems.cisco_dtpc_elem);
3653 ieee80211_bss_info_change_notify(sdata, changed);
3656 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3657 struct sk_buff *skb)
3659 struct ieee80211_rx_status *rx_status;
3660 struct ieee80211_mgmt *mgmt;
3662 struct ieee802_11_elems elems;
3665 rx_status = (struct ieee80211_rx_status *) skb->cb;
3666 mgmt = (struct ieee80211_mgmt *) skb->data;
3667 fc = le16_to_cpu(mgmt->frame_control);
3671 switch (fc & IEEE80211_FCTL_STYPE) {
3672 case IEEE80211_STYPE_BEACON:
3673 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3675 case IEEE80211_STYPE_PROBE_RESP:
3676 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3678 case IEEE80211_STYPE_AUTH:
3679 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3681 case IEEE80211_STYPE_DEAUTH:
3682 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3684 case IEEE80211_STYPE_DISASSOC:
3685 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3687 case IEEE80211_STYPE_ASSOC_RESP:
3688 case IEEE80211_STYPE_REASSOC_RESP:
3689 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3691 case IEEE80211_STYPE_ACTION:
3692 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3693 ies_len = skb->len -
3694 offsetof(struct ieee80211_mgmt,
3695 u.action.u.chan_switch.variable);
3700 ieee802_11_parse_elems(
3701 mgmt->u.action.u.chan_switch.variable,
3702 ies_len, true, &elems);
3704 if (elems.parse_error)
3707 ieee80211_sta_process_chanswitch(sdata,
3709 rx_status->device_timestamp,
3711 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3712 ies_len = skb->len -
3713 offsetof(struct ieee80211_mgmt,
3714 u.action.u.ext_chan_switch.variable);
3719 ieee802_11_parse_elems(
3720 mgmt->u.action.u.ext_chan_switch.variable,
3721 ies_len, true, &elems);
3723 if (elems.parse_error)
3726 /* for the handling code pretend this was also an IE */
3727 elems.ext_chansw_ie =
3728 &mgmt->u.action.u.ext_chan_switch.data;
3730 ieee80211_sta_process_chanswitch(sdata,
3732 rx_status->device_timestamp,
3737 sdata_unlock(sdata);
3740 static void ieee80211_sta_timer(unsigned long data)
3742 struct ieee80211_sub_if_data *sdata =
3743 (struct ieee80211_sub_if_data *) data;
3745 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3748 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3749 u8 *bssid, u8 reason, bool tx)
3751 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3753 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3756 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
3760 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
3762 struct ieee80211_local *local = sdata->local;
3763 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3764 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3769 sdata_assert_lock(sdata);
3771 if (WARN_ON_ONCE(!auth_data))
3776 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3777 sdata_info(sdata, "authentication with %pM timed out\n",
3778 auth_data->bss->bssid);
3781 * Most likely AP is not in the range so remove the
3782 * bss struct for that AP.
3784 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3789 drv_mgd_prepare_tx(local, sdata);
3791 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3792 auth_data->bss->bssid, auth_data->tries,
3793 IEEE80211_AUTH_MAX_TRIES);
3795 auth_data->expected_transaction = 2;
3797 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3798 trans = auth_data->sae_trans;
3799 status = auth_data->sae_status;
3800 auth_data->expected_transaction = trans;
3803 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3804 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3805 IEEE80211_TX_INTFL_MLME_CONN_TX;
3807 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3808 auth_data->data, auth_data->data_len,
3809 auth_data->bss->bssid,
3810 auth_data->bss->bssid, NULL, 0, 0,
3813 if (tx_flags == 0) {
3814 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3815 auth_data->timeout_started = true;
3816 run_again(sdata, auth_data->timeout);
3818 auth_data->timeout =
3819 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3820 auth_data->timeout_started = true;
3821 run_again(sdata, auth_data->timeout);
3827 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3829 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3830 struct ieee80211_local *local = sdata->local;
3832 sdata_assert_lock(sdata);
3834 assoc_data->tries++;
3835 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3836 sdata_info(sdata, "association with %pM timed out\n",
3837 assoc_data->bss->bssid);
3840 * Most likely AP is not in the range so remove the
3841 * bss struct for that AP.
3843 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3848 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3849 assoc_data->bss->bssid, assoc_data->tries,
3850 IEEE80211_ASSOC_MAX_TRIES);
3851 ieee80211_send_assoc(sdata);
3853 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3854 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3855 assoc_data->timeout_started = true;
3856 run_again(sdata, assoc_data->timeout);
3858 assoc_data->timeout =
3859 round_jiffies_up(jiffies +
3860 IEEE80211_ASSOC_TIMEOUT_LONG);
3861 assoc_data->timeout_started = true;
3862 run_again(sdata, assoc_data->timeout);
3868 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3869 __le16 fc, bool acked)
3871 struct ieee80211_local *local = sdata->local;
3873 sdata->u.mgd.status_fc = fc;
3874 sdata->u.mgd.status_acked = acked;
3875 sdata->u.mgd.status_received = true;
3877 ieee80211_queue_work(&local->hw, &sdata->work);
3880 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3882 struct ieee80211_local *local = sdata->local;
3883 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3887 if (ifmgd->status_received) {
3888 __le16 fc = ifmgd->status_fc;
3889 bool status_acked = ifmgd->status_acked;
3891 ifmgd->status_received = false;
3892 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
3894 ifmgd->auth_data->timeout =
3895 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3896 run_again(sdata, ifmgd->auth_data->timeout);
3898 ifmgd->auth_data->timeout = jiffies - 1;
3900 ifmgd->auth_data->timeout_started = true;
3901 } else if (ifmgd->assoc_data &&
3902 (ieee80211_is_assoc_req(fc) ||
3903 ieee80211_is_reassoc_req(fc))) {
3905 ifmgd->assoc_data->timeout =
3906 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3907 run_again(sdata, ifmgd->assoc_data->timeout);
3909 ifmgd->assoc_data->timeout = jiffies - 1;
3911 ifmgd->assoc_data->timeout_started = true;
3915 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3916 time_after(jiffies, ifmgd->auth_data->timeout)) {
3917 if (ifmgd->auth_data->done) {
3919 * ok ... we waited for assoc but userspace didn't,
3920 * so let's just kill the auth data
3922 ieee80211_destroy_auth_data(sdata, false);
3923 } else if (ieee80211_auth(sdata)) {
3925 struct ieee80211_event event = {
3927 .u.mlme.data = AUTH_EVENT,
3928 .u.mlme.status = MLME_TIMEOUT,
3931 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3933 ieee80211_destroy_auth_data(sdata, false);
3935 cfg80211_auth_timeout(sdata->dev, bssid);
3936 drv_event_callback(sdata->local, sdata, &event);
3938 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3939 run_again(sdata, ifmgd->auth_data->timeout);
3941 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3942 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3943 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3944 ieee80211_do_assoc(sdata)) {
3945 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3946 struct ieee80211_event event = {
3948 .u.mlme.data = ASSOC_EVENT,
3949 .u.mlme.status = MLME_TIMEOUT,
3952 ieee80211_destroy_assoc_data(sdata, false, false);
3953 cfg80211_assoc_timeout(sdata->dev, bss);
3954 drv_event_callback(sdata->local, sdata, &event);
3956 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3957 run_again(sdata, ifmgd->assoc_data->timeout);
3959 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3960 ifmgd->associated) {
3964 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3966 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3967 max_tries = max_nullfunc_tries;
3969 max_tries = max_probe_tries;
3971 /* ACK received for nullfunc probing frame */
3972 if (!ifmgd->probe_send_count)
3973 ieee80211_reset_ap_probe(sdata);
3974 else if (ifmgd->nullfunc_failed) {
3975 if (ifmgd->probe_send_count < max_tries) {
3977 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3978 bssid, ifmgd->probe_send_count,
3980 ieee80211_mgd_probe_ap_send(sdata);
3983 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3985 ieee80211_sta_connection_lost(sdata, bssid,
3986 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3989 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3990 run_again(sdata, ifmgd->probe_timeout);
3991 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3993 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3994 bssid, probe_wait_ms);
3995 ieee80211_sta_connection_lost(sdata, bssid,
3996 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3997 } else if (ifmgd->probe_send_count < max_tries) {
3999 "No probe response from AP %pM after %dms, try %d/%i\n",
4000 bssid, probe_wait_ms,
4001 ifmgd->probe_send_count, max_tries);
4002 ieee80211_mgd_probe_ap_send(sdata);
4005 * We actually lost the connection ... or did we?
4009 "No probe response from AP %pM after %dms, disconnecting.\n",
4010 bssid, probe_wait_ms);
4012 ieee80211_sta_connection_lost(sdata, bssid,
4013 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4017 sdata_unlock(sdata);
4020 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
4022 struct ieee80211_sub_if_data *sdata =
4023 (struct ieee80211_sub_if_data *) data;
4024 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4026 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4029 sdata->u.mgd.connection_loss = false;
4030 ieee80211_queue_work(&sdata->local->hw,
4031 &sdata->u.mgd.beacon_connection_loss_work);
4034 static void ieee80211_sta_conn_mon_timer(unsigned long data)
4036 struct ieee80211_sub_if_data *sdata =
4037 (struct ieee80211_sub_if_data *) data;
4038 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4039 struct ieee80211_local *local = sdata->local;
4041 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4044 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
4047 static void ieee80211_sta_monitor_work(struct work_struct *work)
4049 struct ieee80211_sub_if_data *sdata =
4050 container_of(work, struct ieee80211_sub_if_data,
4051 u.mgd.monitor_work);
4053 ieee80211_mgd_probe_ap(sdata, false);
4056 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4058 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4059 __ieee80211_stop_poll(sdata);
4061 /* let's probe the connection once */
4062 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4063 ieee80211_queue_work(&sdata->local->hw,
4064 &sdata->u.mgd.monitor_work);
4069 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4071 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4072 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4076 if (ifmgd->auth_data || ifmgd->assoc_data) {
4077 const u8 *bssid = ifmgd->auth_data ?
4078 ifmgd->auth_data->bss->bssid :
4079 ifmgd->assoc_data->bss->bssid;
4082 * If we are trying to authenticate / associate while suspending,
4083 * cfg80211 won't know and won't actually abort those attempts,
4084 * thus we need to do that ourselves.
4086 ieee80211_send_deauth_disassoc(sdata, bssid,
4087 IEEE80211_STYPE_DEAUTH,
4088 WLAN_REASON_DEAUTH_LEAVING,
4090 if (ifmgd->assoc_data)
4091 ieee80211_destroy_assoc_data(sdata, false, true);
4092 if (ifmgd->auth_data)
4093 ieee80211_destroy_auth_data(sdata, false);
4094 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4095 IEEE80211_DEAUTH_FRAME_LEN);
4098 /* This is a bit of a hack - we should find a better and more generic
4099 * solution to this. Normally when suspending, cfg80211 will in fact
4100 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4101 * auth (not so important) or assoc (this is the problem) process.
4103 * As a consequence, it can happen that we are in the process of both
4104 * associating and suspending, and receive an association response
4105 * after cfg80211 has checked if it needs to disconnect, but before
4106 * we actually set the flag to drop incoming frames. This will then
4107 * cause the workqueue flush to process the association response in
4108 * the suspend, resulting in a successful association just before it
4109 * tries to remove the interface from the driver, which now though
4110 * has a channel context assigned ... this results in issues.
4112 * To work around this (for now) simply deauth here again if we're
4115 if (ifmgd->associated && !sdata->local->wowlan) {
4117 struct cfg80211_deauth_request req = {
4118 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4122 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4123 ieee80211_mgd_deauth(sdata, &req);
4126 sdata_unlock(sdata);
4129 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4131 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4134 if (!ifmgd->associated) {
4135 sdata_unlock(sdata);
4139 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4140 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4141 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4142 ieee80211_sta_connection_lost(sdata,
4143 ifmgd->associated->bssid,
4144 WLAN_REASON_UNSPECIFIED,
4146 sdata_unlock(sdata);
4149 sdata_unlock(sdata);
4153 /* interface setup */
4154 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4156 struct ieee80211_if_managed *ifmgd;
4158 ifmgd = &sdata->u.mgd;
4159 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4160 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4161 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4162 ieee80211_beacon_connection_loss_work);
4163 INIT_WORK(&ifmgd->csa_connection_drop_work,
4164 ieee80211_csa_connection_drop_work);
4165 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4166 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4167 ieee80211_tdls_peer_del_work);
4168 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
4169 (unsigned long) sdata);
4170 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
4171 (unsigned long) sdata);
4172 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
4173 (unsigned long) sdata);
4174 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
4175 (unsigned long) sdata);
4176 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4177 ieee80211_sta_handle_tspec_ac_params_wk);
4180 ifmgd->powersave = sdata->wdev.ps;
4181 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4182 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4183 ifmgd->p2p_noa_index = -1;
4185 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4186 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4188 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4190 /* Setup TDLS data */
4191 spin_lock_init(&ifmgd->teardown_lock);
4192 ifmgd->teardown_skb = NULL;
4193 ifmgd->orig_teardown_skb = NULL;
4196 /* scan finished notification */
4197 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4199 struct ieee80211_sub_if_data *sdata;
4201 /* Restart STA timers */
4203 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4204 if (ieee80211_sdata_running(sdata))
4205 ieee80211_restart_sta_timer(sdata);
4210 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4211 struct cfg80211_bss *cbss)
4213 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4214 const u8 *ht_cap_ie, *vht_cap_ie;
4215 const struct ieee80211_ht_cap *ht_cap;
4216 const struct ieee80211_vht_cap *vht_cap;
4219 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4222 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4223 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4224 ht_cap = (void *)(ht_cap_ie + 2);
4225 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4227 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4228 * "Tx Unequal Modulation Supported" fields.
4232 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4235 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4236 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4240 vht_cap = (void *)(vht_cap_ie + 2);
4241 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4242 for (nss = 8; nss > 0; nss--) {
4243 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4244 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4247 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4248 chains = max(chains, nss);
4254 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4255 struct cfg80211_bss *cbss)
4257 struct ieee80211_local *local = sdata->local;
4258 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4259 const struct ieee80211_ht_cap *ht_cap = NULL;
4260 const struct ieee80211_ht_operation *ht_oper = NULL;
4261 const struct ieee80211_vht_operation *vht_oper = NULL;
4262 struct ieee80211_supported_band *sband;
4263 struct cfg80211_chan_def chandef;
4268 sband = local->hw.wiphy->bands[cbss->channel->band];
4270 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4271 IEEE80211_STA_DISABLE_80P80MHZ |
4272 IEEE80211_STA_DISABLE_160MHZ);
4276 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4277 sband->ht_cap.ht_supported) {
4278 const u8 *ht_oper_ie, *ht_cap_ie;
4280 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4281 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4282 ht_oper = (void *)(ht_oper_ie + 2);
4284 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4285 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4286 ht_cap = (void *)(ht_cap_ie + 2);
4289 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4294 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4295 sband->vht_cap.vht_supported) {
4296 const u8 *vht_oper_ie, *vht_cap;
4298 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4299 WLAN_EID_VHT_OPERATION);
4300 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4301 vht_oper = (void *)(vht_oper_ie + 2);
4302 if (vht_oper && !ht_oper) {
4305 "AP advertised VHT without HT, disabling both\n");
4306 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4307 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4310 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4311 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4312 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4317 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4319 for (i = 0; i < sband->n_channels; i++) {
4320 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4321 IEEE80211_CHAN_NO_80MHZ))
4329 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4331 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4333 ht_cap, ht_oper, vht_oper,
4336 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4341 /* will change later if needed */
4342 sdata->smps_mode = IEEE80211_SMPS_OFF;
4344 mutex_lock(&local->mtx);
4346 * If this fails (possibly due to channel context sharing
4347 * on incompatible channels, e.g. 80+80 and 160 sharing the
4348 * same control channel) try to use a smaller bandwidth.
4350 ret = ieee80211_vif_use_channel(sdata, &chandef,
4351 IEEE80211_CHANCTX_SHARED);
4353 /* don't downgrade for 5 and 10 MHz channels, though. */
4354 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4355 chandef.width == NL80211_CHAN_WIDTH_10)
4358 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4359 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4360 ret = ieee80211_vif_use_channel(sdata, &chandef,
4361 IEEE80211_CHANCTX_SHARED);
4364 mutex_unlock(&local->mtx);
4368 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4369 struct cfg80211_bss *cbss, bool assoc,
4372 struct ieee80211_local *local = sdata->local;
4373 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4374 struct ieee80211_bss *bss = (void *)cbss->priv;
4375 struct sta_info *new_sta = NULL;
4376 struct ieee80211_supported_band *sband;
4377 bool have_sta = false;
4380 sband = local->hw.wiphy->bands[cbss->channel->band];
4382 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4385 /* If a reconfig is happening, bail out */
4386 if (local->in_reconfig)
4391 have_sta = sta_info_get(sdata, cbss->bssid);
4396 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4401 if (new_sta || override) {
4402 err = ieee80211_prep_channel(sdata, cbss);
4405 sta_info_free(local, new_sta);
4411 u32 rates = 0, basic_rates = 0;
4412 bool have_higher_than_11mbit;
4413 int min_rate = INT_MAX, min_rate_index = -1;
4414 struct ieee80211_chanctx_conf *chanctx_conf;
4415 const struct cfg80211_bss_ies *ies;
4416 int shift = ieee80211_vif_get_shift(&sdata->vif);
4420 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4421 if (WARN_ON(!chanctx_conf)) {
4423 sta_info_free(local, new_sta);
4426 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4429 ieee80211_get_rates(sband, bss->supp_rates,
4430 bss->supp_rates_len,
4431 &rates, &basic_rates,
4432 &have_higher_than_11mbit,
4433 &min_rate, &min_rate_index,
4437 * This used to be a workaround for basic rates missing
4438 * in the association response frame. Now that we no
4439 * longer use the basic rates from there, it probably
4440 * doesn't happen any more, but keep the workaround so
4441 * in case some *other* APs are buggy in different ways
4442 * we can connect -- with a warning.
4444 if (!basic_rates && min_rate_index >= 0) {
4446 "No basic rates, using min rate instead\n");
4447 basic_rates = BIT(min_rate_index);
4450 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4451 sdata->vif.bss_conf.basic_rates = basic_rates;
4453 /* cf. IEEE 802.11 9.2.12 */
4454 if (cbss->channel->band == NL80211_BAND_2GHZ &&
4455 have_higher_than_11mbit)
4456 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4458 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4460 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4462 /* set timing information */
4463 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4465 ies = rcu_dereference(cbss->beacon_ies);
4469 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4470 sdata->vif.bss_conf.sync_device_ts =
4471 bss->device_ts_beacon;
4472 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4473 ies->data, ies->len);
4474 if (tim_ie && tim_ie[1] >= 2)
4475 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4477 sdata->vif.bss_conf.sync_dtim_count = 0;
4478 } else if (!ieee80211_hw_check(&sdata->local->hw,
4479 TIMING_BEACON_ONLY)) {
4480 ies = rcu_dereference(cbss->proberesp_ies);
4481 /* must be non-NULL since beacon IEs were NULL */
4482 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4483 sdata->vif.bss_conf.sync_device_ts =
4484 bss->device_ts_presp;
4485 sdata->vif.bss_conf.sync_dtim_count = 0;
4487 sdata->vif.bss_conf.sync_tsf = 0;
4488 sdata->vif.bss_conf.sync_device_ts = 0;
4489 sdata->vif.bss_conf.sync_dtim_count = 0;
4493 /* tell driver about BSSID, basic rates and timing */
4494 ieee80211_bss_info_change_notify(sdata,
4495 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4496 BSS_CHANGED_BEACON_INT);
4499 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4501 err = sta_info_insert(new_sta);
4505 "failed to insert STA entry for the AP (error %d)\n",
4510 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4512 /* Cancel scan to ensure that nothing interferes with connection */
4513 if (local->scanning)
4514 ieee80211_scan_cancel(local);
4520 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4521 struct cfg80211_auth_request *req)
4523 struct ieee80211_local *local = sdata->local;
4524 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4525 struct ieee80211_mgd_auth_data *auth_data;
4529 /* prepare auth data structure */
4531 switch (req->auth_type) {
4532 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4533 auth_alg = WLAN_AUTH_OPEN;
4535 case NL80211_AUTHTYPE_SHARED_KEY:
4536 if (IS_ERR(local->wep_tx_tfm))
4538 auth_alg = WLAN_AUTH_SHARED_KEY;
4540 case NL80211_AUTHTYPE_FT:
4541 auth_alg = WLAN_AUTH_FT;
4543 case NL80211_AUTHTYPE_NETWORK_EAP:
4544 auth_alg = WLAN_AUTH_LEAP;
4546 case NL80211_AUTHTYPE_SAE:
4547 auth_alg = WLAN_AUTH_SAE;
4549 case NL80211_AUTHTYPE_FILS_SK:
4550 auth_alg = WLAN_AUTH_FILS_SK;
4552 case NL80211_AUTHTYPE_FILS_SK_PFS:
4553 auth_alg = WLAN_AUTH_FILS_SK_PFS;
4555 case NL80211_AUTHTYPE_FILS_PK:
4556 auth_alg = WLAN_AUTH_FILS_PK;
4562 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
4563 req->ie_len, GFP_KERNEL);
4567 auth_data->bss = req->bss;
4569 if (req->auth_data_len >= 4) {
4570 if (req->auth_type == NL80211_AUTHTYPE_SAE) {
4571 __le16 *pos = (__le16 *) req->auth_data;
4573 auth_data->sae_trans = le16_to_cpu(pos[0]);
4574 auth_data->sae_status = le16_to_cpu(pos[1]);
4576 memcpy(auth_data->data, req->auth_data + 4,
4577 req->auth_data_len - 4);
4578 auth_data->data_len += req->auth_data_len - 4;
4581 if (req->ie && req->ie_len) {
4582 memcpy(&auth_data->data[auth_data->data_len],
4583 req->ie, req->ie_len);
4584 auth_data->data_len += req->ie_len;
4587 if (req->key && req->key_len) {
4588 auth_data->key_len = req->key_len;
4589 auth_data->key_idx = req->key_idx;
4590 memcpy(auth_data->key, req->key, req->key_len);
4593 auth_data->algorithm = auth_alg;
4595 /* try to authenticate/probe */
4597 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4598 ifmgd->assoc_data) {
4603 if (ifmgd->auth_data)
4604 ieee80211_destroy_auth_data(sdata, false);
4606 /* prep auth_data so we don't go into idle on disassoc */
4607 ifmgd->auth_data = auth_data;
4609 if (ifmgd->associated) {
4610 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4613 "disconnect from AP %pM for new auth to %pM\n",
4614 ifmgd->associated->bssid, req->bss->bssid);
4615 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4616 WLAN_REASON_UNSPECIFIED,
4619 ieee80211_report_disconnect(sdata, frame_buf,
4620 sizeof(frame_buf), true,
4621 WLAN_REASON_UNSPECIFIED);
4624 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4626 err = ieee80211_prep_connection(sdata, req->bss, false, false);
4630 err = ieee80211_auth(sdata);
4632 sta_info_destroy_addr(sdata, req->bss->bssid);
4636 /* hold our own reference */
4637 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4641 eth_zero_addr(ifmgd->bssid);
4642 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4643 ifmgd->auth_data = NULL;
4644 mutex_lock(&sdata->local->mtx);
4645 ieee80211_vif_release_channel(sdata);
4646 mutex_unlock(&sdata->local->mtx);
4652 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4653 struct cfg80211_assoc_request *req)
4655 struct ieee80211_local *local = sdata->local;
4656 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4657 struct ieee80211_bss *bss = (void *)req->bss->priv;
4658 struct ieee80211_mgd_assoc_data *assoc_data;
4659 const struct cfg80211_bss_ies *beacon_ies;
4660 struct ieee80211_supported_band *sband;
4661 const u8 *ssidie, *ht_ie, *vht_ie;
4663 bool override = false;
4665 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4670 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4676 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4677 assoc_data->ssid_len = ssidie[1];
4680 if (ifmgd->associated) {
4681 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4684 "disconnect from AP %pM for new assoc to %pM\n",
4685 ifmgd->associated->bssid, req->bss->bssid);
4686 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4687 WLAN_REASON_UNSPECIFIED,
4690 ieee80211_report_disconnect(sdata, frame_buf,
4691 sizeof(frame_buf), true,
4692 WLAN_REASON_UNSPECIFIED);
4695 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4700 if (ifmgd->assoc_data) {
4705 if (ifmgd->auth_data) {
4708 /* keep sta info, bssid if matching */
4709 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4710 ieee80211_destroy_auth_data(sdata, match);
4713 /* prepare assoc data */
4715 ifmgd->beacon_crc_valid = false;
4717 assoc_data->wmm = bss->wmm_used &&
4718 (local->hw.queues >= IEEE80211_NUM_ACS);
4721 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4722 * We still associate in non-HT mode (11a/b/g) if any one of these
4723 * ciphers is configured as pairwise.
4724 * We can set this to true for non-11n hardware, that'll be checked
4725 * separately along with the peer capabilities.
4727 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4728 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4729 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4730 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4731 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4732 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4733 netdev_info(sdata->dev,
4734 "disabling HT/VHT due to WEP/TKIP use\n");
4738 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4739 sband = local->hw.wiphy->bands[req->bss->channel->band];
4740 if (!sband->ht_cap.ht_supported ||
4741 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4742 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4743 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4744 if (!bss->wmm_used &&
4745 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4746 netdev_info(sdata->dev,
4747 "disabling HT as WMM/QoS is not supported by the AP\n");
4750 /* disable VHT if we don't support it or the AP doesn't use WMM */
4751 if (!sband->vht_cap.vht_supported ||
4752 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4753 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4754 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4755 if (!bss->wmm_used &&
4756 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4757 netdev_info(sdata->dev,
4758 "disabling VHT as WMM/QoS is not supported by the AP\n");
4761 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4762 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4763 sizeof(ifmgd->ht_capa_mask));
4765 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4766 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4767 sizeof(ifmgd->vht_capa_mask));
4769 if (req->ie && req->ie_len) {
4770 memcpy(assoc_data->ie, req->ie, req->ie_len);
4771 assoc_data->ie_len = req->ie_len;
4774 if (req->fils_kek) {
4775 /* should already be checked in cfg80211 - so warn */
4776 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
4780 memcpy(assoc_data->fils_kek, req->fils_kek,
4782 assoc_data->fils_kek_len = req->fils_kek_len;
4785 if (req->fils_nonces)
4786 memcpy(assoc_data->fils_nonces, req->fils_nonces,
4787 2 * FILS_NONCE_LEN);
4789 assoc_data->bss = req->bss;
4791 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4792 if (ifmgd->powersave)
4793 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4795 sdata->smps_mode = IEEE80211_SMPS_OFF;
4797 sdata->smps_mode = ifmgd->req_smps;
4799 assoc_data->capability = req->bss->capability;
4800 assoc_data->supp_rates = bss->supp_rates;
4801 assoc_data->supp_rates_len = bss->supp_rates_len;
4804 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4805 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4806 assoc_data->ap_ht_param =
4807 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4809 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4810 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4811 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4812 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4813 sizeof(struct ieee80211_vht_cap));
4815 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4818 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4819 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
4820 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4821 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4823 if (bss->wmm_used && bss->uapsd_supported &&
4824 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4825 assoc_data->uapsd = true;
4826 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4828 assoc_data->uapsd = false;
4829 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4832 if (req->prev_bssid)
4833 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4836 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4837 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4839 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4840 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4843 if (req->flags & ASSOC_REQ_USE_RRM)
4844 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4846 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4848 if (req->crypto.control_port)
4849 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4851 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4853 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4854 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4855 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4858 /* kick off associate process */
4860 ifmgd->assoc_data = assoc_data;
4861 ifmgd->dtim_period = 0;
4862 ifmgd->have_beacon = false;
4864 /* override HT/VHT configuration only if the AP and we support it */
4865 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
4866 struct ieee80211_sta_ht_cap sta_ht_cap;
4868 if (req->flags & ASSOC_REQ_DISABLE_HT)
4871 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4872 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4874 /* check for 40 MHz disable override */
4875 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
4876 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
4877 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
4880 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4881 req->flags & ASSOC_REQ_DISABLE_VHT)
4885 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4886 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4887 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4890 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4891 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4893 err = ieee80211_prep_connection(sdata, req->bss, true, override);
4898 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4900 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
4903 * Wait up to one beacon interval ...
4904 * should this be more if we miss one?
4906 sdata_info(sdata, "waiting for beacon from %pM\n",
4908 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4909 assoc_data->timeout_started = true;
4910 assoc_data->need_beacon = true;
4911 } else if (beacon_ies) {
4912 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4917 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4918 const struct ieee80211_tim_ie *tim;
4919 tim = (void *)(tim_ie + 2);
4920 ifmgd->dtim_period = tim->dtim_period;
4921 dtim_count = tim->dtim_count;
4923 ifmgd->have_beacon = true;
4924 assoc_data->timeout = jiffies;
4925 assoc_data->timeout_started = true;
4927 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4928 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4929 sdata->vif.bss_conf.sync_device_ts =
4930 bss->device_ts_beacon;
4931 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4934 assoc_data->timeout = jiffies;
4935 assoc_data->timeout_started = true;
4939 run_again(sdata, assoc_data->timeout);
4941 if (bss->corrupt_data) {
4942 char *corrupt_type = "data";
4943 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4944 if (bss->corrupt_data &
4945 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4946 corrupt_type = "beacon and probe response";
4948 corrupt_type = "beacon";
4949 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4950 corrupt_type = "probe response";
4951 sdata_info(sdata, "associating with AP with corrupt %s\n",
4957 eth_zero_addr(ifmgd->bssid);
4958 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4959 ifmgd->assoc_data = NULL;
4965 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4966 struct cfg80211_deauth_request *req)
4968 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4969 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4970 bool tx = !req->local_state_change;
4972 if (ifmgd->auth_data &&
4973 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4975 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4976 req->bssid, req->reason_code,
4977 ieee80211_get_reason_code_string(req->reason_code));
4979 drv_mgd_prepare_tx(sdata->local, sdata);
4980 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4981 IEEE80211_STYPE_DEAUTH,
4982 req->reason_code, tx,
4984 ieee80211_destroy_auth_data(sdata, false);
4985 ieee80211_report_disconnect(sdata, frame_buf,
4986 sizeof(frame_buf), true,
4992 if (ifmgd->assoc_data &&
4993 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
4995 "aborting association with %pM by local choice (Reason: %u=%s)\n",
4996 req->bssid, req->reason_code,
4997 ieee80211_get_reason_code_string(req->reason_code));
4999 drv_mgd_prepare_tx(sdata->local, sdata);
5000 ieee80211_send_deauth_disassoc(sdata, req->bssid,
5001 IEEE80211_STYPE_DEAUTH,
5002 req->reason_code, tx,
5004 ieee80211_destroy_assoc_data(sdata, false, true);
5005 ieee80211_report_disconnect(sdata, frame_buf,
5006 sizeof(frame_buf), true,
5011 if (ifmgd->associated &&
5012 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
5014 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
5015 req->bssid, req->reason_code,
5016 ieee80211_get_reason_code_string(req->reason_code));
5018 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5019 req->reason_code, tx, frame_buf);
5020 ieee80211_report_disconnect(sdata, frame_buf,
5021 sizeof(frame_buf), true,
5029 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
5030 struct cfg80211_disassoc_request *req)
5032 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5034 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5037 * cfg80211 should catch this ... but it's racy since
5038 * we can receive a disassoc frame, process it, hand it
5039 * to cfg80211 while that's in a locked section already
5040 * trying to tell us that the user wants to disconnect.
5042 if (ifmgd->associated != req->bss)
5046 "disassociating from %pM by local choice (Reason: %u=%s)\n",
5047 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5049 memcpy(bssid, req->bss->bssid, ETH_ALEN);
5050 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5051 req->reason_code, !req->local_state_change,
5054 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5060 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5062 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5065 * Make sure some work items will not run after this,
5066 * they will not do anything but might not have been
5067 * cancelled when disconnecting.
5069 cancel_work_sync(&ifmgd->monitor_work);
5070 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5071 cancel_work_sync(&ifmgd->request_smps_work);
5072 cancel_work_sync(&ifmgd->csa_connection_drop_work);
5073 cancel_work_sync(&ifmgd->chswitch_work);
5074 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5077 if (ifmgd->assoc_data) {
5078 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5079 ieee80211_destroy_assoc_data(sdata, false, false);
5080 cfg80211_assoc_timeout(sdata->dev, bss);
5082 if (ifmgd->auth_data)
5083 ieee80211_destroy_auth_data(sdata, false);
5084 spin_lock_bh(&ifmgd->teardown_lock);
5085 if (ifmgd->teardown_skb) {
5086 kfree_skb(ifmgd->teardown_skb);
5087 ifmgd->teardown_skb = NULL;
5088 ifmgd->orig_teardown_skb = NULL;
5090 spin_unlock_bh(&ifmgd->teardown_lock);
5091 del_timer_sync(&ifmgd->timer);
5092 sdata_unlock(sdata);
5095 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5096 enum nl80211_cqm_rssi_threshold_event rssi_event,
5100 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5102 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
5104 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
5106 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5108 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5110 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5112 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5114 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5116 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);