]> git.karo-electronics.de Git - karo-tx-linux.git/blob - net/tipc/bearer.h
tipc: move bcast_addr from struct tipc_media to struct tipc_bearer
[karo-tx-linux.git] / net / tipc / bearer.h
1 /*
2  * net/tipc/bearer.h: Include file for TIPC bearer code
3  *
4  * Copyright (c) 1996-2006, Ericsson AB
5  * Copyright (c) 2005, 2010-2011, Wind River Systems
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the names of the copyright holders nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * Alternatively, this software may be distributed under the terms of the
21  * GNU General Public License ("GPL") version 2 as published by the Free
22  * Software Foundation.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36
37 #ifndef _TIPC_BEARER_H
38 #define _TIPC_BEARER_H
39
40 #include "bcast.h"
41
42 #define MAX_BEARERS     2
43 #define MAX_MEDIA       2
44
45 /*
46  * Identifiers associated with TIPC message header media address info
47  *
48  * - address info field is 20 bytes long
49  * - media type identifier located at offset 3
50  * - remaining bytes vary according to media type
51  */
52 #define TIPC_MEDIA_ADDR_SIZE    20
53 #define TIPC_MEDIA_TYPE_OFFSET  3
54
55 /*
56  * Identifiers of supported TIPC media types
57  */
58 #define TIPC_MEDIA_TYPE_ETH     1
59
60 /**
61  * struct tipc_media_addr - destination address used by TIPC bearers
62  * @value: address info (format defined by media)
63  * @media_id: TIPC media type identifier
64  * @broadcast: non-zero if address is a broadcast address
65  */
66 struct tipc_media_addr {
67         u8 value[TIPC_MEDIA_ADDR_SIZE];
68         u8 media_id;
69         u8 broadcast;
70 };
71
72 struct tipc_bearer;
73
74 /**
75  * struct tipc_media - TIPC media information available to internal users
76  * @send_msg: routine which handles buffer transmission
77  * @enable_bearer: routine which enables a bearer
78  * @disable_bearer: routine which disables a bearer
79  * @addr2str: routine which converts media address to string
80  * @addr2msg: routine which converts media address to protocol message area
81  * @msg2addr: routine which converts media address from protocol message area
82  * @bcast_addr: media address used in broadcasting
83  * @priority: default link (and bearer) priority
84  * @tolerance: default time (in ms) before declaring link failure
85  * @window: default window (in packets) before declaring link congestion
86  * @type_id: TIPC media identifier
87  * @name: media name
88  */
89 struct tipc_media {
90         int (*send_msg)(struct sk_buff *buf,
91                         struct tipc_bearer *b_ptr,
92                         struct tipc_media_addr *dest);
93         int (*enable_bearer)(struct tipc_bearer *b_ptr);
94         void (*disable_bearer)(struct tipc_bearer *b_ptr);
95         int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
96         int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
97         int (*msg2addr)(const struct tipc_bearer *b_ptr,
98                         struct tipc_media_addr *a, char *msg_area);
99         u32 priority;
100         u32 tolerance;
101         u32 window;
102         u32 type_id;
103         char name[TIPC_MAX_MEDIA_NAME];
104 };
105
106 /**
107  * struct tipc_bearer - TIPC bearer structure
108  * @usr_handle: pointer to additional media-specific information about bearer
109  * @mtu: max packet size bearer can support
110  * @blocked: non-zero if bearer is blocked
111  * @lock: spinlock for controlling access to bearer
112  * @addr: media-specific address associated with bearer
113  * @name: bearer name (format = media:interface)
114  * @media: ptr to media structure associated with bearer
115  * @priority: default link priority for bearer
116  * @window: default window size for bearer
117  * @tolerance: default link tolerance for bearer
118  * @identity: array index of this bearer within TIPC bearer array
119  * @link_req: ptr to (optional) structure making periodic link setup requests
120  * @links: list of non-congested links associated with bearer
121  * @active: non-zero if bearer structure is represents a bearer
122  * @net_plane: network plane ('A' through 'H') currently associated with bearer
123  * @nodes: indicates which nodes in cluster can be reached through bearer
124  *
125  * Note: media-specific code is responsible for initialization of the fields
126  * indicated below when a bearer is enabled; TIPC's generic bearer code takes
127  * care of initializing all other fields.
128  */
129 struct tipc_bearer {
130         void *usr_handle;                       /* initalized by media */
131         u32 mtu;                                /* initalized by media */
132         int blocked;                            /* initalized by media */
133         struct tipc_media_addr addr;            /* initalized by media */
134         char name[TIPC_MAX_BEARER_NAME];
135         spinlock_t lock;
136         struct tipc_media *media;
137         struct tipc_media_addr bcast_addr;
138         u32 priority;
139         u32 window;
140         u32 tolerance;
141         u32 identity;
142         struct tipc_link_req *link_req;
143         struct list_head links;
144         int active;
145         char net_plane;
146         struct tipc_node_map nodes;
147 };
148
149 struct tipc_bearer_names {
150         char media_name[TIPC_MAX_MEDIA_NAME];
151         char if_name[TIPC_MAX_IF_NAME];
152 };
153
154 struct tipc_link;
155
156 extern struct tipc_bearer tipc_bearers[];
157
158 /*
159  * TIPC routines available to supported media types
160  */
161 int tipc_register_media(struct tipc_media *m_ptr);
162
163 void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
164
165 int  tipc_block_bearer(const char *name);
166 void tipc_continue(struct tipc_bearer *tb_ptr);
167
168 int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
169 int tipc_disable_bearer(const char *name);
170
171 /*
172  * Routines made available to TIPC by supported media types
173  */
174 int  tipc_eth_media_start(void);
175 void tipc_eth_media_stop(void);
176
177 int tipc_media_set_priority(const char *name, u32 new_value);
178 int tipc_media_set_window(const char *name, u32 new_value);
179 void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
180 struct sk_buff *tipc_media_get_names(void);
181
182 struct sk_buff *tipc_bearer_get_names(void);
183 void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
184 void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
185 struct tipc_bearer *tipc_bearer_find(const char *name);
186 struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
187 struct tipc_media *tipc_media_find(const char *name);
188 int tipc_bearer_blocked(struct tipc_bearer *b_ptr);
189 void tipc_bearer_stop(void);
190
191 /**
192  * tipc_bearer_send- sends buffer to destination over bearer
193  *
194  * IMPORTANT:
195  * The media send routine must not alter the buffer being passed in
196  * as it may be needed for later retransmission!
197  */
198 static inline void tipc_bearer_send(struct tipc_bearer *b, struct sk_buff *buf,
199                                    struct tipc_media_addr *dest)
200 {
201         b->media->send_msg(buf, b, dest);
202 }
203
204 #endif  /* _TIPC_BEARER_H */