2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
5 * Copyright 2008-2011 Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
6 * Copyright 2013-2014 Intel Mobile Communications GmbH
8 * Permission to use, copy, modify, and/or distribute this software for any
9 * purpose with or without fee is hereby granted, provided that the above
10 * copyright notice and this permission notice appear in all copies.
12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
23 * DOC: Wireless regulatory infrastructure
25 * The usual implementation is for a driver to read a device EEPROM to
26 * determine which regulatory domain it should be operating under, then
27 * looking up the allowable channels in a driver-local table and finally
28 * registering those channels in the wiphy structure.
30 * Another set of compliance enforcement is for drivers to use their
31 * own compliance limits which can be stored on the EEPROM. The host
32 * driver or firmware may ensure these are used.
34 * In addition to all this we provide an extra layer of regulatory
35 * conformance. For drivers which do not have any regulatory
36 * information CRDA provides the complete regulatory solution.
37 * For others it provides a community effort on further restrictions
38 * to enhance compliance.
40 * Note: When number of rules --> infinity we will not be able to
41 * index on alpha2 any more, instead we'll probably have to
42 * rely on some SHA1 checksum of the regdomain for example.
46 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
48 #include <linux/kernel.h>
49 #include <linux/export.h>
50 #include <linux/slab.h>
51 #include <linux/list.h>
52 #include <linux/ctype.h>
53 #include <linux/nl80211.h>
54 #include <linux/platform_device.h>
55 #include <linux/moduleparam.h>
56 #include <net/cfg80211.h>
63 #ifdef CONFIG_CFG80211_REG_DEBUG
64 #define REG_DBG_PRINT(format, args...) \
65 printk(KERN_DEBUG pr_fmt(format), ##args)
67 #define REG_DBG_PRINT(args...)
71 * Grace period we give before making sure all current interfaces reside on
72 * channels allowed by the current regulatory domain.
74 #define REG_ENFORCE_GRACE_MS 60000
77 * enum reg_request_treatment - regulatory request treatment
79 * @REG_REQ_OK: continue processing the regulatory request
80 * @REG_REQ_IGNORE: ignore the regulatory request
81 * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should
82 * be intersected with the current one.
83 * @REG_REQ_ALREADY_SET: the regulatory request will not change the current
84 * regulatory settings, and no further processing is required.
85 * @REG_REQ_USER_HINT_HANDLED: a non alpha2 user hint was handled and no
86 * further processing is required, i.e., not need to update last_request
87 * etc. This should be used for user hints that do not provide an alpha2
88 * but some other type of regulatory hint, i.e., indoor operation.
90 enum reg_request_treatment {
95 REG_REQ_USER_HINT_HANDLED,
98 static struct regulatory_request core_request_world = {
99 .initiator = NL80211_REGDOM_SET_BY_CORE,
104 .country_ie_env = ENVIRON_ANY,
108 * Receipt of information from last regulatory request,
109 * protected by RTNL (and can be accessed with RCU protection)
111 static struct regulatory_request __rcu *last_request =
112 (void __rcu *)&core_request_world;
114 /* To trigger userspace events */
115 static struct platform_device *reg_pdev;
118 * Central wireless core regulatory domains, we only need two,
119 * the current one and a world regulatory domain in case we have no
120 * information to give us an alpha2.
121 * (protected by RTNL, can be read under RCU)
123 const struct ieee80211_regdomain __rcu *cfg80211_regdomain;
126 * Number of devices that registered to the core
127 * that support cellular base station regulatory hints
128 * (protected by RTNL)
130 static int reg_num_devs_support_basehint;
133 * State variable indicating if the platform on which the devices
134 * are attached is operating in an indoor environment. The state variable
135 * is relevant for all registered devices.
136 * (protected by RTNL)
138 static bool reg_is_indoor;
140 static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
142 return rtnl_dereference(cfg80211_regdomain);
145 static const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy)
147 return rtnl_dereference(wiphy->regd);
150 static const char *reg_dfs_region_str(enum nl80211_dfs_regions dfs_region)
152 switch (dfs_region) {
153 case NL80211_DFS_UNSET:
155 case NL80211_DFS_FCC:
157 case NL80211_DFS_ETSI:
165 enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy)
167 const struct ieee80211_regdomain *regd = NULL;
168 const struct ieee80211_regdomain *wiphy_regd = NULL;
170 regd = get_cfg80211_regdom();
174 wiphy_regd = get_wiphy_regdom(wiphy);
178 if (wiphy_regd->dfs_region == regd->dfs_region)
181 REG_DBG_PRINT("%s: device specific dfs_region "
182 "(%s) disagrees with cfg80211's "
183 "central dfs_region (%s)\n",
184 dev_name(&wiphy->dev),
185 reg_dfs_region_str(wiphy_regd->dfs_region),
186 reg_dfs_region_str(regd->dfs_region));
189 return regd->dfs_region;
192 static void rcu_free_regdom(const struct ieee80211_regdomain *r)
196 kfree_rcu((struct ieee80211_regdomain *)r, rcu_head);
199 static struct regulatory_request *get_last_request(void)
201 return rcu_dereference_rtnl(last_request);
204 /* Used to queue up regulatory hints */
205 static LIST_HEAD(reg_requests_list);
206 static spinlock_t reg_requests_lock;
208 /* Used to queue up beacon hints for review */
209 static LIST_HEAD(reg_pending_beacons);
210 static spinlock_t reg_pending_beacons_lock;
212 /* Used to keep track of processed beacon hints */
213 static LIST_HEAD(reg_beacon_list);
216 struct list_head list;
217 struct ieee80211_channel chan;
220 static void reg_check_chans_work(struct work_struct *work);
221 static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work);
223 static void reg_todo(struct work_struct *work);
224 static DECLARE_WORK(reg_work, reg_todo);
226 static void reg_timeout_work(struct work_struct *work);
227 static DECLARE_DELAYED_WORK(reg_timeout, reg_timeout_work);
229 /* We keep a static world regulatory domain in case of the absence of CRDA */
230 static const struct ieee80211_regdomain world_regdom = {
234 /* IEEE 802.11b/g, channels 1..11 */
235 REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
236 /* IEEE 802.11b/g, channels 12..13. */
237 REG_RULE(2467-10, 2472+10, 40, 6, 20,
239 /* IEEE 802.11 channel 14 - Only JP enables
240 * this and for 802.11b only */
241 REG_RULE(2484-10, 2484+10, 20, 6, 20,
243 NL80211_RRF_NO_OFDM),
244 /* IEEE 802.11a, channel 36..48 */
245 REG_RULE(5180-10, 5240+10, 160, 6, 20,
248 /* IEEE 802.11a, channel 52..64 - DFS required */
249 REG_RULE(5260-10, 5320+10, 160, 6, 20,
253 /* IEEE 802.11a, channel 100..144 - DFS required */
254 REG_RULE(5500-10, 5720+10, 160, 6, 20,
258 /* IEEE 802.11a, channel 149..165 */
259 REG_RULE(5745-10, 5825+10, 80, 6, 20,
262 /* IEEE 802.11ad (60gHz), channels 1..3 */
263 REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0),
267 /* protected by RTNL */
268 static const struct ieee80211_regdomain *cfg80211_world_regdom =
271 static char *ieee80211_regdom = "00";
272 static char user_alpha2[2];
274 module_param(ieee80211_regdom, charp, 0444);
275 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
277 static void reg_free_request(struct regulatory_request *request)
279 if (request != get_last_request())
283 static void reg_free_last_request(void)
285 struct regulatory_request *lr = get_last_request();
287 if (lr != &core_request_world && lr)
288 kfree_rcu(lr, rcu_head);
291 static void reg_update_last_request(struct regulatory_request *request)
293 struct regulatory_request *lr;
295 lr = get_last_request();
299 reg_free_last_request();
300 rcu_assign_pointer(last_request, request);
303 static void reset_regdomains(bool full_reset,
304 const struct ieee80211_regdomain *new_regdom)
306 const struct ieee80211_regdomain *r;
310 r = get_cfg80211_regdom();
312 /* avoid freeing static information or freeing something twice */
313 if (r == cfg80211_world_regdom)
315 if (cfg80211_world_regdom == &world_regdom)
316 cfg80211_world_regdom = NULL;
317 if (r == &world_regdom)
321 rcu_free_regdom(cfg80211_world_regdom);
323 cfg80211_world_regdom = &world_regdom;
324 rcu_assign_pointer(cfg80211_regdomain, new_regdom);
329 reg_update_last_request(&core_request_world);
333 * Dynamic world regulatory domain requested by the wireless
334 * core upon initialization
336 static void update_world_regdomain(const struct ieee80211_regdomain *rd)
338 struct regulatory_request *lr;
340 lr = get_last_request();
344 reset_regdomains(false, rd);
346 cfg80211_world_regdom = rd;
349 bool is_world_regdom(const char *alpha2)
353 return alpha2[0] == '0' && alpha2[1] == '0';
356 static bool is_alpha2_set(const char *alpha2)
360 return alpha2[0] && alpha2[1];
363 static bool is_unknown_alpha2(const char *alpha2)
368 * Special case where regulatory domain was built by driver
369 * but a specific alpha2 cannot be determined
371 return alpha2[0] == '9' && alpha2[1] == '9';
374 static bool is_intersected_alpha2(const char *alpha2)
379 * Special case where regulatory domain is the
380 * result of an intersection between two regulatory domain
383 return alpha2[0] == '9' && alpha2[1] == '8';
386 static bool is_an_alpha2(const char *alpha2)
390 return isalpha(alpha2[0]) && isalpha(alpha2[1]);
393 static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y)
395 if (!alpha2_x || !alpha2_y)
397 return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1];
400 static bool regdom_changes(const char *alpha2)
402 const struct ieee80211_regdomain *r = get_cfg80211_regdom();
406 return !alpha2_equal(r->alpha2, alpha2);
410 * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets
411 * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER
412 * has ever been issued.
414 static bool is_user_regdom_saved(void)
416 if (user_alpha2[0] == '9' && user_alpha2[1] == '7')
419 /* This would indicate a mistake on the design */
420 if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2),
421 "Unexpected user alpha2: %c%c\n",
422 user_alpha2[0], user_alpha2[1]))
428 static const struct ieee80211_regdomain *
429 reg_copy_regd(const struct ieee80211_regdomain *src_regd)
431 struct ieee80211_regdomain *regd;
436 sizeof(struct ieee80211_regdomain) +
437 src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule);
439 regd = kzalloc(size_of_regd, GFP_KERNEL);
441 return ERR_PTR(-ENOMEM);
443 memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain));
445 for (i = 0; i < src_regd->n_reg_rules; i++)
446 memcpy(®d->reg_rules[i], &src_regd->reg_rules[i],
447 sizeof(struct ieee80211_reg_rule));
452 #ifdef CONFIG_CFG80211_INTERNAL_REGDB
453 struct reg_regdb_search_request {
455 struct list_head list;
458 static LIST_HEAD(reg_regdb_search_list);
459 static DEFINE_MUTEX(reg_regdb_search_mutex);
461 static void reg_regdb_search(struct work_struct *work)
463 struct reg_regdb_search_request *request;
464 const struct ieee80211_regdomain *curdom, *regdom = NULL;
469 mutex_lock(®_regdb_search_mutex);
470 while (!list_empty(®_regdb_search_list)) {
471 request = list_first_entry(®_regdb_search_list,
472 struct reg_regdb_search_request,
474 list_del(&request->list);
476 for (i = 0; i < reg_regdb_size; i++) {
477 curdom = reg_regdb[i];
479 if (alpha2_equal(request->alpha2, curdom->alpha2)) {
480 regdom = reg_copy_regd(curdom);
487 mutex_unlock(®_regdb_search_mutex);
489 if (!IS_ERR_OR_NULL(regdom))
495 static DECLARE_WORK(reg_regdb_work, reg_regdb_search);
497 static void reg_regdb_query(const char *alpha2)
499 struct reg_regdb_search_request *request;
504 request = kzalloc(sizeof(struct reg_regdb_search_request), GFP_KERNEL);
508 memcpy(request->alpha2, alpha2, 2);
510 mutex_lock(®_regdb_search_mutex);
511 list_add_tail(&request->list, ®_regdb_search_list);
512 mutex_unlock(®_regdb_search_mutex);
514 schedule_work(®_regdb_work);
517 /* Feel free to add any other sanity checks here */
518 static void reg_regdb_size_check(void)
520 /* We should ideally BUILD_BUG_ON() but then random builds would fail */
521 WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it...");
524 static inline void reg_regdb_size_check(void) {}
525 static inline void reg_regdb_query(const char *alpha2) {}
526 #endif /* CONFIG_CFG80211_INTERNAL_REGDB */
529 * This lets us keep regulatory code which is updated on a regulatory
530 * basis in userspace.
532 static int call_crda(const char *alpha2)
535 char *env[] = { country, NULL };
537 snprintf(country, sizeof(country), "COUNTRY=%c%c",
538 alpha2[0], alpha2[1]);
540 if (!is_world_regdom((char *) alpha2))
541 pr_info("Calling CRDA for country: %c%c\n",
542 alpha2[0], alpha2[1]);
544 pr_info("Calling CRDA to update world regulatory domain\n");
546 /* query internal regulatory database (if it exists) */
547 reg_regdb_query(alpha2);
549 return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, env);
552 static enum reg_request_treatment
553 reg_call_crda(struct regulatory_request *request)
555 if (call_crda(request->alpha2))
556 return REG_REQ_IGNORE;
560 bool reg_is_valid_request(const char *alpha2)
562 struct regulatory_request *lr = get_last_request();
564 if (!lr || lr->processed)
567 return alpha2_equal(lr->alpha2, alpha2);
570 static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy)
572 struct regulatory_request *lr = get_last_request();
575 * Follow the driver's regulatory domain, if present, unless a country
576 * IE has been processed or a user wants to help complaince further
578 if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
579 lr->initiator != NL80211_REGDOM_SET_BY_USER &&
581 return get_wiphy_regdom(wiphy);
583 return get_cfg80211_regdom();
587 reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd,
588 const struct ieee80211_reg_rule *rule)
590 const struct ieee80211_freq_range *freq_range = &rule->freq_range;
591 const struct ieee80211_freq_range *freq_range_tmp;
592 const struct ieee80211_reg_rule *tmp;
593 u32 start_freq, end_freq, idx, no;
595 for (idx = 0; idx < rd->n_reg_rules; idx++)
596 if (rule == &rd->reg_rules[idx])
599 if (idx == rd->n_reg_rules)
606 tmp = &rd->reg_rules[--no];
607 freq_range_tmp = &tmp->freq_range;
609 if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz)
612 freq_range = freq_range_tmp;
615 start_freq = freq_range->start_freq_khz;
618 freq_range = &rule->freq_range;
621 while (no < rd->n_reg_rules - 1) {
622 tmp = &rd->reg_rules[++no];
623 freq_range_tmp = &tmp->freq_range;
625 if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz)
628 freq_range = freq_range_tmp;
631 end_freq = freq_range->end_freq_khz;
633 return end_freq - start_freq;
636 unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
637 const struct ieee80211_reg_rule *rule)
639 unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule);
641 if (rule->flags & NL80211_RRF_NO_160MHZ)
642 bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80));
643 if (rule->flags & NL80211_RRF_NO_80MHZ)
644 bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40));
647 * HT40+/HT40- limits are handled per-channel. Only limit BW if both
650 if (rule->flags & NL80211_RRF_NO_HT40MINUS &&
651 rule->flags & NL80211_RRF_NO_HT40PLUS)
652 bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20));
657 /* Sanity check on a regulatory rule */
658 static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
660 const struct ieee80211_freq_range *freq_range = &rule->freq_range;
663 if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0)
666 if (freq_range->start_freq_khz > freq_range->end_freq_khz)
669 freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
671 if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
672 freq_range->max_bandwidth_khz > freq_diff)
678 static bool is_valid_rd(const struct ieee80211_regdomain *rd)
680 const struct ieee80211_reg_rule *reg_rule = NULL;
683 if (!rd->n_reg_rules)
686 if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES))
689 for (i = 0; i < rd->n_reg_rules; i++) {
690 reg_rule = &rd->reg_rules[i];
691 if (!is_valid_reg_rule(reg_rule))
698 static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
699 u32 center_freq_khz, u32 bw_khz)
701 u32 start_freq_khz, end_freq_khz;
703 start_freq_khz = center_freq_khz - (bw_khz/2);
704 end_freq_khz = center_freq_khz + (bw_khz/2);
706 if (start_freq_khz >= freq_range->start_freq_khz &&
707 end_freq_khz <= freq_range->end_freq_khz)
714 * freq_in_rule_band - tells us if a frequency is in a frequency band
715 * @freq_range: frequency rule we want to query
716 * @freq_khz: frequency we are inquiring about
718 * This lets us know if a specific frequency rule is or is not relevant to
719 * a specific frequency's band. Bands are device specific and artificial
720 * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
721 * however it is safe for now to assume that a frequency rule should not be
722 * part of a frequency's band if the start freq or end freq are off by more
723 * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
725 * This resolution can be lowered and should be considered as we add
726 * regulatory rule support for other "bands".
728 static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
731 #define ONE_GHZ_IN_KHZ 1000000
733 * From 802.11ad: directional multi-gigabit (DMG):
734 * Pertaining to operation in a frequency band containing a channel
735 * with the Channel starting frequency above 45 GHz.
737 u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
738 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
739 if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
741 if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
744 #undef ONE_GHZ_IN_KHZ
748 * Later on we can perhaps use the more restrictive DFS
749 * region but we don't have information for that yet so
750 * for now simply disallow conflicts.
752 static enum nl80211_dfs_regions
753 reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1,
754 const enum nl80211_dfs_regions dfs_region2)
756 if (dfs_region1 != dfs_region2)
757 return NL80211_DFS_UNSET;
762 * Helper for regdom_intersect(), this does the real
763 * mathematical intersection fun
765 static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
766 const struct ieee80211_regdomain *rd2,
767 const struct ieee80211_reg_rule *rule1,
768 const struct ieee80211_reg_rule *rule2,
769 struct ieee80211_reg_rule *intersected_rule)
771 const struct ieee80211_freq_range *freq_range1, *freq_range2;
772 struct ieee80211_freq_range *freq_range;
773 const struct ieee80211_power_rule *power_rule1, *power_rule2;
774 struct ieee80211_power_rule *power_rule;
775 u32 freq_diff, max_bandwidth1, max_bandwidth2;
777 freq_range1 = &rule1->freq_range;
778 freq_range2 = &rule2->freq_range;
779 freq_range = &intersected_rule->freq_range;
781 power_rule1 = &rule1->power_rule;
782 power_rule2 = &rule2->power_rule;
783 power_rule = &intersected_rule->power_rule;
785 freq_range->start_freq_khz = max(freq_range1->start_freq_khz,
786 freq_range2->start_freq_khz);
787 freq_range->end_freq_khz = min(freq_range1->end_freq_khz,
788 freq_range2->end_freq_khz);
790 max_bandwidth1 = freq_range1->max_bandwidth_khz;
791 max_bandwidth2 = freq_range2->max_bandwidth_khz;
793 if (rule1->flags & NL80211_RRF_AUTO_BW)
794 max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
795 if (rule2->flags & NL80211_RRF_AUTO_BW)
796 max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
798 freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2);
800 intersected_rule->flags = rule1->flags | rule2->flags;
803 * In case NL80211_RRF_AUTO_BW requested for both rules
804 * set AUTO_BW in intersected rule also. Next we will
805 * calculate BW correctly in handle_channel function.
806 * In other case remove AUTO_BW flag while we calculate
807 * maximum bandwidth correctly and auto calculation is
810 if ((rule1->flags & NL80211_RRF_AUTO_BW) &&
811 (rule2->flags & NL80211_RRF_AUTO_BW))
812 intersected_rule->flags |= NL80211_RRF_AUTO_BW;
814 intersected_rule->flags &= ~NL80211_RRF_AUTO_BW;
816 freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
817 if (freq_range->max_bandwidth_khz > freq_diff)
818 freq_range->max_bandwidth_khz = freq_diff;
820 power_rule->max_eirp = min(power_rule1->max_eirp,
821 power_rule2->max_eirp);
822 power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
823 power_rule2->max_antenna_gain);
825 intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms,
828 if (!is_valid_reg_rule(intersected_rule))
834 /* check whether old rule contains new rule */
835 static bool rule_contains(struct ieee80211_reg_rule *r1,
836 struct ieee80211_reg_rule *r2)
838 /* for simplicity, currently consider only same flags */
839 if (r1->flags != r2->flags)
842 /* verify r1 is more restrictive */
843 if ((r1->power_rule.max_antenna_gain >
844 r2->power_rule.max_antenna_gain) ||
845 r1->power_rule.max_eirp > r2->power_rule.max_eirp)
848 /* make sure r2's range is contained within r1 */
849 if (r1->freq_range.start_freq_khz > r2->freq_range.start_freq_khz ||
850 r1->freq_range.end_freq_khz < r2->freq_range.end_freq_khz)
853 /* and finally verify that r1.max_bw >= r2.max_bw */
854 if (r1->freq_range.max_bandwidth_khz <
855 r2->freq_range.max_bandwidth_khz)
861 /* add or extend current rules. do nothing if rule is already contained */
862 static void add_rule(struct ieee80211_reg_rule *rule,
863 struct ieee80211_reg_rule *reg_rules, u32 *n_rules)
865 struct ieee80211_reg_rule *tmp_rule;
868 for (i = 0; i < *n_rules; i++) {
869 tmp_rule = ®_rules[i];
870 /* rule is already contained - do nothing */
871 if (rule_contains(tmp_rule, rule))
874 /* extend rule if possible */
875 if (rule_contains(rule, tmp_rule)) {
876 memcpy(tmp_rule, rule, sizeof(*rule));
881 memcpy(®_rules[*n_rules], rule, sizeof(*rule));
886 * regdom_intersect - do the intersection between two regulatory domains
887 * @rd1: first regulatory domain
888 * @rd2: second regulatory domain
890 * Use this function to get the intersection between two regulatory domains.
891 * Once completed we will mark the alpha2 for the rd as intersected, "98",
892 * as no one single alpha2 can represent this regulatory domain.
894 * Returns a pointer to the regulatory domain structure which will hold the
895 * resulting intersection of rules between rd1 and rd2. We will
896 * kzalloc() this structure for you.
898 static struct ieee80211_regdomain *
899 regdom_intersect(const struct ieee80211_regdomain *rd1,
900 const struct ieee80211_regdomain *rd2)
904 unsigned int num_rules = 0;
905 const struct ieee80211_reg_rule *rule1, *rule2;
906 struct ieee80211_reg_rule intersected_rule;
907 struct ieee80211_regdomain *rd;
913 * First we get a count of the rules we'll need, then we actually
914 * build them. This is to so we can malloc() and free() a
915 * regdomain once. The reason we use reg_rules_intersect() here
916 * is it will return -EINVAL if the rule computed makes no sense.
917 * All rules that do check out OK are valid.
920 for (x = 0; x < rd1->n_reg_rules; x++) {
921 rule1 = &rd1->reg_rules[x];
922 for (y = 0; y < rd2->n_reg_rules; y++) {
923 rule2 = &rd2->reg_rules[y];
924 if (!reg_rules_intersect(rd1, rd2, rule1, rule2,
933 size_of_regd = sizeof(struct ieee80211_regdomain) +
934 num_rules * sizeof(struct ieee80211_reg_rule);
936 rd = kzalloc(size_of_regd, GFP_KERNEL);
940 for (x = 0; x < rd1->n_reg_rules; x++) {
941 rule1 = &rd1->reg_rules[x];
942 for (y = 0; y < rd2->n_reg_rules; y++) {
943 rule2 = &rd2->reg_rules[y];
944 r = reg_rules_intersect(rd1, rd2, rule1, rule2,
947 * No need to memset here the intersected rule here as
948 * we're not using the stack anymore
953 add_rule(&intersected_rule, rd->reg_rules,
960 rd->dfs_region = reg_intersect_dfs_region(rd1->dfs_region,
967 * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may
968 * want to just have the channel structure use these
970 static u32 map_regdom_flags(u32 rd_flags)
972 u32 channel_flags = 0;
973 if (rd_flags & NL80211_RRF_NO_IR_ALL)
974 channel_flags |= IEEE80211_CHAN_NO_IR;
975 if (rd_flags & NL80211_RRF_DFS)
976 channel_flags |= IEEE80211_CHAN_RADAR;
977 if (rd_flags & NL80211_RRF_NO_OFDM)
978 channel_flags |= IEEE80211_CHAN_NO_OFDM;
979 if (rd_flags & NL80211_RRF_NO_OUTDOOR)
980 channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
981 if (rd_flags & NL80211_RRF_GO_CONCURRENT)
982 channel_flags |= IEEE80211_CHAN_GO_CONCURRENT;
983 if (rd_flags & NL80211_RRF_NO_HT40MINUS)
984 channel_flags |= IEEE80211_CHAN_NO_HT40MINUS;
985 if (rd_flags & NL80211_RRF_NO_HT40PLUS)
986 channel_flags |= IEEE80211_CHAN_NO_HT40PLUS;
987 if (rd_flags & NL80211_RRF_NO_80MHZ)
988 channel_flags |= IEEE80211_CHAN_NO_80MHZ;
989 if (rd_flags & NL80211_RRF_NO_160MHZ)
990 channel_flags |= IEEE80211_CHAN_NO_160MHZ;
991 return channel_flags;
994 static const struct ieee80211_reg_rule *
995 freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
996 const struct ieee80211_regdomain *regd)
999 bool band_rule_found = false;
1000 bool bw_fits = false;
1003 return ERR_PTR(-EINVAL);
1005 for (i = 0; i < regd->n_reg_rules; i++) {
1006 const struct ieee80211_reg_rule *rr;
1007 const struct ieee80211_freq_range *fr = NULL;
1009 rr = ®d->reg_rules[i];
1010 fr = &rr->freq_range;
1013 * We only need to know if one frequency rule was
1014 * was in center_freq's band, that's enough, so lets
1015 * not overwrite it once found
1017 if (!band_rule_found)
1018 band_rule_found = freq_in_rule_band(fr, center_freq);
1020 bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
1022 if (band_rule_found && bw_fits)
1026 if (!band_rule_found)
1027 return ERR_PTR(-ERANGE);
1029 return ERR_PTR(-EINVAL);
1032 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
1035 const struct ieee80211_regdomain *regd;
1037 regd = reg_get_regdomain(wiphy);
1039 return freq_reg_info_regd(wiphy, center_freq, regd);
1041 EXPORT_SYMBOL(freq_reg_info);
1043 const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
1045 switch (initiator) {
1046 case NL80211_REGDOM_SET_BY_CORE:
1048 case NL80211_REGDOM_SET_BY_USER:
1050 case NL80211_REGDOM_SET_BY_DRIVER:
1052 case NL80211_REGDOM_SET_BY_COUNTRY_IE:
1053 return "country IE";
1059 EXPORT_SYMBOL(reg_initiator_name);
1061 #ifdef CONFIG_CFG80211_REG_DEBUG
1062 static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
1063 struct ieee80211_channel *chan,
1064 const struct ieee80211_reg_rule *reg_rule)
1066 const struct ieee80211_power_rule *power_rule;
1067 const struct ieee80211_freq_range *freq_range;
1068 char max_antenna_gain[32], bw[32];
1070 power_rule = ®_rule->power_rule;
1071 freq_range = ®_rule->freq_range;
1073 if (!power_rule->max_antenna_gain)
1074 snprintf(max_antenna_gain, sizeof(max_antenna_gain), "N/A");
1076 snprintf(max_antenna_gain, sizeof(max_antenna_gain), "%d",
1077 power_rule->max_antenna_gain);
1079 if (reg_rule->flags & NL80211_RRF_AUTO_BW)
1080 snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
1081 freq_range->max_bandwidth_khz,
1082 reg_get_max_bandwidth(regd, reg_rule));
1084 snprintf(bw, sizeof(bw), "%d KHz",
1085 freq_range->max_bandwidth_khz);
1087 REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n",
1090 REG_DBG_PRINT("%d KHz - %d KHz @ %s), (%s mBi, %d mBm)\n",
1091 freq_range->start_freq_khz, freq_range->end_freq_khz,
1092 bw, max_antenna_gain,
1093 power_rule->max_eirp);
1096 static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
1097 struct ieee80211_channel *chan,
1098 const struct ieee80211_reg_rule *reg_rule)
1105 * Note that right now we assume the desired channel bandwidth
1106 * is always 20 MHz for each individual channel (HT40 uses 20 MHz
1107 * per channel, the primary and the extension channel).
1109 static void handle_channel(struct wiphy *wiphy,
1110 enum nl80211_reg_initiator initiator,
1111 struct ieee80211_channel *chan)
1113 u32 flags, bw_flags = 0;
1114 const struct ieee80211_reg_rule *reg_rule = NULL;
1115 const struct ieee80211_power_rule *power_rule = NULL;
1116 const struct ieee80211_freq_range *freq_range = NULL;
1117 struct wiphy *request_wiphy = NULL;
1118 struct regulatory_request *lr = get_last_request();
1119 const struct ieee80211_regdomain *regd;
1120 u32 max_bandwidth_khz;
1122 request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
1124 flags = chan->orig_flags;
1126 reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq));
1127 if (IS_ERR(reg_rule)) {
1129 * We will disable all channels that do not match our
1130 * received regulatory rule unless the hint is coming
1131 * from a Country IE and the Country IE had no information
1132 * about a band. The IEEE 802.11 spec allows for an AP
1133 * to send only a subset of the regulatory rules allowed,
1134 * so an AP in the US that only supports 2.4 GHz may only send
1135 * a country IE with information for the 2.4 GHz band
1136 * while 5 GHz is still supported.
1138 if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
1139 PTR_ERR(reg_rule) == -ERANGE)
1142 if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
1143 request_wiphy && request_wiphy == wiphy &&
1144 request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
1145 REG_DBG_PRINT("Disabling freq %d MHz for good\n",
1147 chan->orig_flags |= IEEE80211_CHAN_DISABLED;
1148 chan->flags = chan->orig_flags;
1150 REG_DBG_PRINT("Disabling freq %d MHz\n",
1152 chan->flags |= IEEE80211_CHAN_DISABLED;
1157 regd = reg_get_regdomain(wiphy);
1158 chan_reg_rule_print_dbg(regd, chan, reg_rule);
1160 power_rule = ®_rule->power_rule;
1161 freq_range = ®_rule->freq_range;
1163 max_bandwidth_khz = freq_range->max_bandwidth_khz;
1164 /* Check if auto calculation requested */
1165 if (reg_rule->flags & NL80211_RRF_AUTO_BW)
1166 max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
1168 if (max_bandwidth_khz < MHZ_TO_KHZ(40))
1169 bw_flags = IEEE80211_CHAN_NO_HT40;
1170 if (max_bandwidth_khz < MHZ_TO_KHZ(80))
1171 bw_flags |= IEEE80211_CHAN_NO_80MHZ;
1172 if (max_bandwidth_khz < MHZ_TO_KHZ(160))
1173 bw_flags |= IEEE80211_CHAN_NO_160MHZ;
1175 if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
1176 request_wiphy && request_wiphy == wiphy &&
1177 request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
1179 * This guarantees the driver's requested regulatory domain
1180 * will always be used as a base for further regulatory
1183 chan->flags = chan->orig_flags =
1184 map_regdom_flags(reg_rule->flags) | bw_flags;
1185 chan->max_antenna_gain = chan->orig_mag =
1186 (int) MBI_TO_DBI(power_rule->max_antenna_gain);
1187 chan->max_reg_power = chan->max_power = chan->orig_mpwr =
1188 (int) MBM_TO_DBM(power_rule->max_eirp);
1190 if (chan->flags & IEEE80211_CHAN_RADAR) {
1191 chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
1192 if (reg_rule->dfs_cac_ms)
1193 chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
1199 chan->dfs_state = NL80211_DFS_USABLE;
1200 chan->dfs_state_entered = jiffies;
1202 chan->beacon_found = false;
1203 chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
1204 chan->max_antenna_gain =
1205 min_t(int, chan->orig_mag,
1206 MBI_TO_DBI(power_rule->max_antenna_gain));
1207 chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp);
1209 if (chan->flags & IEEE80211_CHAN_RADAR) {
1210 if (reg_rule->dfs_cac_ms)
1211 chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
1213 chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
1216 if (chan->orig_mpwr) {
1218 * Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER
1219 * will always follow the passed country IE power settings.
1221 if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
1222 wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER)
1223 chan->max_power = chan->max_reg_power;
1225 chan->max_power = min(chan->orig_mpwr,
1226 chan->max_reg_power);
1228 chan->max_power = chan->max_reg_power;
1231 static void handle_band(struct wiphy *wiphy,
1232 enum nl80211_reg_initiator initiator,
1233 struct ieee80211_supported_band *sband)
1240 for (i = 0; i < sband->n_channels; i++)
1241 handle_channel(wiphy, initiator, &sband->channels[i]);
1244 static bool reg_request_cell_base(struct regulatory_request *request)
1246 if (request->initiator != NL80211_REGDOM_SET_BY_USER)
1248 return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE;
1251 static bool reg_request_indoor(struct regulatory_request *request)
1253 if (request->initiator != NL80211_REGDOM_SET_BY_USER)
1255 return request->user_reg_hint_type == NL80211_USER_REG_HINT_INDOOR;
1258 bool reg_last_request_cell_base(void)
1260 return reg_request_cell_base(get_last_request());
1263 #ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS
1264 /* Core specific check */
1265 static enum reg_request_treatment
1266 reg_ignore_cell_hint(struct regulatory_request *pending_request)
1268 struct regulatory_request *lr = get_last_request();
1270 if (!reg_num_devs_support_basehint)
1271 return REG_REQ_IGNORE;
1273 if (reg_request_cell_base(lr) &&
1274 !regdom_changes(pending_request->alpha2))
1275 return REG_REQ_ALREADY_SET;
1280 /* Device specific check */
1281 static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy)
1283 return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS);
1286 static int reg_ignore_cell_hint(struct regulatory_request *pending_request)
1288 return REG_REQ_IGNORE;
1291 static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy)
1297 static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy)
1299 if (wiphy->regulatory_flags & REGULATORY_STRICT_REG &&
1300 !(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG))
1305 static bool ignore_reg_update(struct wiphy *wiphy,
1306 enum nl80211_reg_initiator initiator)
1308 struct regulatory_request *lr = get_last_request();
1311 REG_DBG_PRINT("Ignoring regulatory request set by %s "
1312 "since last_request is not set\n",
1313 reg_initiator_name(initiator));
1317 if (initiator == NL80211_REGDOM_SET_BY_CORE &&
1318 wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
1319 REG_DBG_PRINT("Ignoring regulatory request set by %s "
1320 "since the driver uses its own custom "
1321 "regulatory domain\n",
1322 reg_initiator_name(initiator));
1327 * wiphy->regd will be set once the device has its own
1328 * desired regulatory domain set
1330 if (wiphy_strict_alpha2_regd(wiphy) && !wiphy->regd &&
1331 initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
1332 !is_world_regdom(lr->alpha2)) {
1333 REG_DBG_PRINT("Ignoring regulatory request set by %s "
1334 "since the driver requires its own regulatory "
1335 "domain to be set first\n",
1336 reg_initiator_name(initiator));
1340 if (reg_request_cell_base(lr))
1341 return reg_dev_ignore_cell_hint(wiphy);
1346 static bool reg_is_world_roaming(struct wiphy *wiphy)
1348 const struct ieee80211_regdomain *cr = get_cfg80211_regdom();
1349 const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy);
1350 struct regulatory_request *lr = get_last_request();
1352 if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2)))
1355 if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
1356 wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
1362 static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx,
1363 struct reg_beacon *reg_beacon)
1365 struct ieee80211_supported_band *sband;
1366 struct ieee80211_channel *chan;
1367 bool channel_changed = false;
1368 struct ieee80211_channel chan_before;
1370 sband = wiphy->bands[reg_beacon->chan.band];
1371 chan = &sband->channels[chan_idx];
1373 if (likely(chan->center_freq != reg_beacon->chan.center_freq))
1376 if (chan->beacon_found)
1379 chan->beacon_found = true;
1381 if (!reg_is_world_roaming(wiphy))
1384 if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS)
1387 chan_before.center_freq = chan->center_freq;
1388 chan_before.flags = chan->flags;
1390 if (chan->flags & IEEE80211_CHAN_NO_IR) {
1391 chan->flags &= ~IEEE80211_CHAN_NO_IR;
1392 channel_changed = true;
1395 if (channel_changed)
1396 nl80211_send_beacon_hint_event(wiphy, &chan_before, chan);
1400 * Called when a scan on a wiphy finds a beacon on
1403 static void wiphy_update_new_beacon(struct wiphy *wiphy,
1404 struct reg_beacon *reg_beacon)
1407 struct ieee80211_supported_band *sband;
1409 if (!wiphy->bands[reg_beacon->chan.band])
1412 sband = wiphy->bands[reg_beacon->chan.band];
1414 for (i = 0; i < sband->n_channels; i++)
1415 handle_reg_beacon(wiphy, i, reg_beacon);
1419 * Called upon reg changes or a new wiphy is added
1421 static void wiphy_update_beacon_reg(struct wiphy *wiphy)
1424 struct ieee80211_supported_band *sband;
1425 struct reg_beacon *reg_beacon;
1427 list_for_each_entry(reg_beacon, ®_beacon_list, list) {
1428 if (!wiphy->bands[reg_beacon->chan.band])
1430 sband = wiphy->bands[reg_beacon->chan.band];
1431 for (i = 0; i < sband->n_channels; i++)
1432 handle_reg_beacon(wiphy, i, reg_beacon);
1436 /* Reap the advantages of previously found beacons */
1437 static void reg_process_beacons(struct wiphy *wiphy)
1440 * Means we are just firing up cfg80211, so no beacons would
1441 * have been processed yet.
1445 wiphy_update_beacon_reg(wiphy);
1448 static bool is_ht40_allowed(struct ieee80211_channel *chan)
1452 if (chan->flags & IEEE80211_CHAN_DISABLED)
1454 /* This would happen when regulatory rules disallow HT40 completely */
1455 if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40)
1460 static void reg_process_ht_flags_channel(struct wiphy *wiphy,
1461 struct ieee80211_channel *channel)
1463 struct ieee80211_supported_band *sband = wiphy->bands[channel->band];
1464 struct ieee80211_channel *channel_before = NULL, *channel_after = NULL;
1467 if (!is_ht40_allowed(channel)) {
1468 channel->flags |= IEEE80211_CHAN_NO_HT40;
1473 * We need to ensure the extension channels exist to
1474 * be able to use HT40- or HT40+, this finds them (or not)
1476 for (i = 0; i < sband->n_channels; i++) {
1477 struct ieee80211_channel *c = &sband->channels[i];
1479 if (c->center_freq == (channel->center_freq - 20))
1481 if (c->center_freq == (channel->center_freq + 20))
1486 * Please note that this assumes target bandwidth is 20 MHz,
1487 * if that ever changes we also need to change the below logic
1488 * to include that as well.
1490 if (!is_ht40_allowed(channel_before))
1491 channel->flags |= IEEE80211_CHAN_NO_HT40MINUS;
1493 channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
1495 if (!is_ht40_allowed(channel_after))
1496 channel->flags |= IEEE80211_CHAN_NO_HT40PLUS;
1498 channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
1501 static void reg_process_ht_flags_band(struct wiphy *wiphy,
1502 struct ieee80211_supported_band *sband)
1509 for (i = 0; i < sband->n_channels; i++)
1510 reg_process_ht_flags_channel(wiphy, &sband->channels[i]);
1513 static void reg_process_ht_flags(struct wiphy *wiphy)
1515 enum ieee80211_band band;
1520 for (band = 0; band < IEEE80211_NUM_BANDS; band++)
1521 reg_process_ht_flags_band(wiphy, wiphy->bands[band]);
1524 static void reg_call_notifier(struct wiphy *wiphy,
1525 struct regulatory_request *request)
1527 if (wiphy->reg_notifier)
1528 wiphy->reg_notifier(wiphy, request);
1531 static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
1533 struct ieee80211_channel *ch;
1534 struct cfg80211_chan_def chandef;
1535 struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1540 if (!wdev->netdev || !netif_running(wdev->netdev))
1543 switch (wdev->iftype) {
1544 case NL80211_IFTYPE_AP:
1545 case NL80211_IFTYPE_P2P_GO:
1546 if (!wdev->beacon_interval)
1549 ret = cfg80211_reg_can_beacon(wiphy,
1550 &wdev->chandef, wdev->iftype);
1552 case NL80211_IFTYPE_STATION:
1553 case NL80211_IFTYPE_P2P_CLIENT:
1554 case NL80211_IFTYPE_ADHOC:
1555 if (!wdev->current_bss ||
1556 !wdev->current_bss->pub.channel)
1559 ch = wdev->current_bss->pub.channel;
1560 if (rdev->ops->get_channel &&
1561 !rdev_get_channel(rdev, wdev, &chandef))
1562 ret = cfg80211_chandef_usable(wiphy, &chandef,
1563 IEEE80211_CHAN_DISABLED);
1565 ret = !(ch->flags & IEEE80211_CHAN_DISABLED);
1567 case NL80211_IFTYPE_MONITOR:
1568 case NL80211_IFTYPE_AP_VLAN:
1569 case NL80211_IFTYPE_P2P_DEVICE:
1570 /* no enforcement required */
1573 /* others not implemented for now */
1583 static void reg_leave_invalid_chans(struct wiphy *wiphy)
1585 struct wireless_dev *wdev;
1586 struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1590 list_for_each_entry(wdev, &rdev->wdev_list, list)
1591 if (!reg_wdev_chan_valid(wiphy, wdev))
1592 cfg80211_leave(rdev, wdev);
1595 static void reg_check_chans_work(struct work_struct *work)
1597 struct cfg80211_registered_device *rdev;
1599 REG_DBG_PRINT("Verifying active interfaces after reg change\n");
1602 list_for_each_entry(rdev, &cfg80211_rdev_list, list)
1603 if (!(rdev->wiphy.regulatory_flags &
1604 REGULATORY_IGNORE_STALE_KICKOFF))
1605 reg_leave_invalid_chans(&rdev->wiphy);
1610 static void reg_check_channels(void)
1613 * Give usermode a chance to do something nicer (move to another
1614 * channel, orderly disconnection), before forcing a disconnection.
1616 mod_delayed_work(system_power_efficient_wq,
1618 msecs_to_jiffies(REG_ENFORCE_GRACE_MS));
1621 static void wiphy_update_regulatory(struct wiphy *wiphy,
1622 enum nl80211_reg_initiator initiator)
1624 enum ieee80211_band band;
1625 struct regulatory_request *lr = get_last_request();
1627 if (ignore_reg_update(wiphy, initiator)) {
1629 * Regulatory updates set by CORE are ignored for custom
1630 * regulatory cards. Let us notify the changes to the driver,
1631 * as some drivers used this to restore its orig_* reg domain.
1633 if (initiator == NL80211_REGDOM_SET_BY_CORE &&
1634 wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
1635 reg_call_notifier(wiphy, lr);
1639 lr->dfs_region = get_cfg80211_regdom()->dfs_region;
1641 for (band = 0; band < IEEE80211_NUM_BANDS; band++)
1642 handle_band(wiphy, initiator, wiphy->bands[band]);
1644 reg_process_beacons(wiphy);
1645 reg_process_ht_flags(wiphy);
1646 reg_call_notifier(wiphy, lr);
1649 static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)
1651 struct cfg80211_registered_device *rdev;
1652 struct wiphy *wiphy;
1656 list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
1657 wiphy = &rdev->wiphy;
1658 wiphy_update_regulatory(wiphy, initiator);
1661 reg_check_channels();
1664 static void handle_channel_custom(struct wiphy *wiphy,
1665 struct ieee80211_channel *chan,
1666 const struct ieee80211_regdomain *regd)
1669 const struct ieee80211_reg_rule *reg_rule = NULL;
1670 const struct ieee80211_power_rule *power_rule = NULL;
1671 const struct ieee80211_freq_range *freq_range = NULL;
1672 u32 max_bandwidth_khz;
1674 reg_rule = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
1677 if (IS_ERR(reg_rule)) {
1678 REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n",
1680 chan->orig_flags |= IEEE80211_CHAN_DISABLED;
1681 chan->flags = chan->orig_flags;
1685 chan_reg_rule_print_dbg(regd, chan, reg_rule);
1687 power_rule = ®_rule->power_rule;
1688 freq_range = ®_rule->freq_range;
1690 max_bandwidth_khz = freq_range->max_bandwidth_khz;
1691 /* Check if auto calculation requested */
1692 if (reg_rule->flags & NL80211_RRF_AUTO_BW)
1693 max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
1695 if (max_bandwidth_khz < MHZ_TO_KHZ(40))
1696 bw_flags = IEEE80211_CHAN_NO_HT40;
1697 if (max_bandwidth_khz < MHZ_TO_KHZ(80))
1698 bw_flags |= IEEE80211_CHAN_NO_80MHZ;
1699 if (max_bandwidth_khz < MHZ_TO_KHZ(160))
1700 bw_flags |= IEEE80211_CHAN_NO_160MHZ;
1702 chan->dfs_state_entered = jiffies;
1703 chan->dfs_state = NL80211_DFS_USABLE;
1705 chan->beacon_found = false;
1706 chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
1707 chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
1708 chan->max_reg_power = chan->max_power =
1709 (int) MBM_TO_DBM(power_rule->max_eirp);
1711 if (chan->flags & IEEE80211_CHAN_RADAR) {
1712 if (reg_rule->dfs_cac_ms)
1713 chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
1715 chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
1718 chan->max_power = chan->max_reg_power;
1721 static void handle_band_custom(struct wiphy *wiphy,
1722 struct ieee80211_supported_band *sband,
1723 const struct ieee80211_regdomain *regd)
1730 for (i = 0; i < sband->n_channels; i++)
1731 handle_channel_custom(wiphy, &sband->channels[i], regd);
1734 /* Used by drivers prior to wiphy registration */
1735 void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
1736 const struct ieee80211_regdomain *regd)
1738 enum ieee80211_band band;
1739 unsigned int bands_set = 0;
1741 WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG),
1742 "wiphy should have REGULATORY_CUSTOM_REG\n");
1743 wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
1745 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1746 if (!wiphy->bands[band])
1748 handle_band_custom(wiphy, wiphy->bands[band], regd);
1753 * no point in calling this if it won't have any effect
1754 * on your device's supported bands.
1756 WARN_ON(!bands_set);
1758 EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
1760 static void reg_set_request_processed(void)
1762 bool need_more_processing = false;
1763 struct regulatory_request *lr = get_last_request();
1765 lr->processed = true;
1767 spin_lock(®_requests_lock);
1768 if (!list_empty(®_requests_list))
1769 need_more_processing = true;
1770 spin_unlock(®_requests_lock);
1772 if (lr->initiator == NL80211_REGDOM_SET_BY_USER)
1773 cancel_delayed_work(®_timeout);
1775 if (need_more_processing)
1776 schedule_work(®_work);
1780 * reg_process_hint_core - process core regulatory requests
1781 * @pending_request: a pending core regulatory request
1783 * The wireless subsystem can use this function to process
1784 * a regulatory request issued by the regulatory core.
1786 * Returns one of the different reg request treatment values.
1788 static enum reg_request_treatment
1789 reg_process_hint_core(struct regulatory_request *core_request)
1792 core_request->intersect = false;
1793 core_request->processed = false;
1795 reg_update_last_request(core_request);
1797 return reg_call_crda(core_request);
1800 static enum reg_request_treatment
1801 __reg_process_hint_user(struct regulatory_request *user_request)
1803 struct regulatory_request *lr = get_last_request();
1805 if (reg_request_indoor(user_request)) {
1806 reg_is_indoor = true;
1807 return REG_REQ_USER_HINT_HANDLED;
1810 if (reg_request_cell_base(user_request))
1811 return reg_ignore_cell_hint(user_request);
1813 if (reg_request_cell_base(lr))
1814 return REG_REQ_IGNORE;
1816 if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
1817 return REG_REQ_INTERSECT;
1819 * If the user knows better the user should set the regdom
1820 * to their country before the IE is picked up
1822 if (lr->initiator == NL80211_REGDOM_SET_BY_USER &&
1824 return REG_REQ_IGNORE;
1826 * Process user requests only after previous user/driver/core
1827 * requests have been processed
1829 if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE ||
1830 lr->initiator == NL80211_REGDOM_SET_BY_DRIVER ||
1831 lr->initiator == NL80211_REGDOM_SET_BY_USER) &&
1832 regdom_changes(lr->alpha2))
1833 return REG_REQ_IGNORE;
1835 if (!regdom_changes(user_request->alpha2))
1836 return REG_REQ_ALREADY_SET;
1842 * reg_process_hint_user - process user regulatory requests
1843 * @user_request: a pending user regulatory request
1845 * The wireless subsystem can use this function to process
1846 * a regulatory request initiated by userspace.
1848 * Returns one of the different reg request treatment values.
1850 static enum reg_request_treatment
1851 reg_process_hint_user(struct regulatory_request *user_request)
1853 enum reg_request_treatment treatment;
1855 treatment = __reg_process_hint_user(user_request);
1856 if (treatment == REG_REQ_IGNORE ||
1857 treatment == REG_REQ_ALREADY_SET ||
1858 treatment == REG_REQ_USER_HINT_HANDLED) {
1859 reg_free_request(user_request);
1863 user_request->intersect = treatment == REG_REQ_INTERSECT;
1864 user_request->processed = false;
1866 reg_update_last_request(user_request);
1868 user_alpha2[0] = user_request->alpha2[0];
1869 user_alpha2[1] = user_request->alpha2[1];
1871 return reg_call_crda(user_request);
1874 static enum reg_request_treatment
1875 __reg_process_hint_driver(struct regulatory_request *driver_request)
1877 struct regulatory_request *lr = get_last_request();
1879 if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) {
1880 if (regdom_changes(driver_request->alpha2))
1882 return REG_REQ_ALREADY_SET;
1886 * This would happen if you unplug and plug your card
1887 * back in or if you add a new device for which the previously
1888 * loaded card also agrees on the regulatory domain.
1890 if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
1891 !regdom_changes(driver_request->alpha2))
1892 return REG_REQ_ALREADY_SET;
1894 return REG_REQ_INTERSECT;
1898 * reg_process_hint_driver - process driver regulatory requests
1899 * @driver_request: a pending driver regulatory request
1901 * The wireless subsystem can use this function to process
1902 * a regulatory request issued by an 802.11 driver.
1904 * Returns one of the different reg request treatment values.
1906 static enum reg_request_treatment
1907 reg_process_hint_driver(struct wiphy *wiphy,
1908 struct regulatory_request *driver_request)
1910 const struct ieee80211_regdomain *regd, *tmp;
1911 enum reg_request_treatment treatment;
1913 treatment = __reg_process_hint_driver(driver_request);
1915 switch (treatment) {
1918 case REG_REQ_IGNORE:
1919 case REG_REQ_USER_HINT_HANDLED:
1920 reg_free_request(driver_request);
1922 case REG_REQ_INTERSECT:
1924 case REG_REQ_ALREADY_SET:
1925 regd = reg_copy_regd(get_cfg80211_regdom());
1927 reg_free_request(driver_request);
1928 return REG_REQ_IGNORE;
1931 tmp = get_wiphy_regdom(wiphy);
1932 rcu_assign_pointer(wiphy->regd, regd);
1933 rcu_free_regdom(tmp);
1937 driver_request->intersect = treatment == REG_REQ_INTERSECT;
1938 driver_request->processed = false;
1940 reg_update_last_request(driver_request);
1943 * Since CRDA will not be called in this case as we already
1944 * have applied the requested regulatory domain before we just
1945 * inform userspace we have processed the request
1947 if (treatment == REG_REQ_ALREADY_SET) {
1948 nl80211_send_reg_change_event(driver_request);
1949 reg_set_request_processed();
1953 return reg_call_crda(driver_request);
1956 static enum reg_request_treatment
1957 __reg_process_hint_country_ie(struct wiphy *wiphy,
1958 struct regulatory_request *country_ie_request)
1960 struct wiphy *last_wiphy = NULL;
1961 struct regulatory_request *lr = get_last_request();
1963 if (reg_request_cell_base(lr)) {
1964 /* Trust a Cell base station over the AP's country IE */
1965 if (regdom_changes(country_ie_request->alpha2))
1966 return REG_REQ_IGNORE;
1967 return REG_REQ_ALREADY_SET;
1969 if (wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_IGNORE)
1970 return REG_REQ_IGNORE;
1973 if (unlikely(!is_an_alpha2(country_ie_request->alpha2)))
1976 if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE)
1979 last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
1981 if (last_wiphy != wiphy) {
1983 * Two cards with two APs claiming different
1984 * Country IE alpha2s. We could
1985 * intersect them, but that seems unlikely
1986 * to be correct. Reject second one for now.
1988 if (regdom_changes(country_ie_request->alpha2))
1989 return REG_REQ_IGNORE;
1990 return REG_REQ_ALREADY_SET;
1993 * Two consecutive Country IE hints on the same wiphy.
1994 * This should be picked up early by the driver/stack
1996 if (WARN_ON(regdom_changes(country_ie_request->alpha2)))
1998 return REG_REQ_ALREADY_SET;
2002 * reg_process_hint_country_ie - process regulatory requests from country IEs
2003 * @country_ie_request: a regulatory request from a country IE
2005 * The wireless subsystem can use this function to process
2006 * a regulatory request issued by a country Information Element.
2008 * Returns one of the different reg request treatment values.
2010 static enum reg_request_treatment
2011 reg_process_hint_country_ie(struct wiphy *wiphy,
2012 struct regulatory_request *country_ie_request)
2014 enum reg_request_treatment treatment;
2016 treatment = __reg_process_hint_country_ie(wiphy, country_ie_request);
2018 switch (treatment) {
2021 case REG_REQ_IGNORE:
2022 case REG_REQ_USER_HINT_HANDLED:
2024 case REG_REQ_ALREADY_SET:
2025 reg_free_request(country_ie_request);
2027 case REG_REQ_INTERSECT:
2028 reg_free_request(country_ie_request);
2030 * This doesn't happen yet, not sure we
2031 * ever want to support it for this case.
2033 WARN_ONCE(1, "Unexpected intersection for country IEs");
2034 return REG_REQ_IGNORE;
2037 country_ie_request->intersect = false;
2038 country_ie_request->processed = false;
2040 reg_update_last_request(country_ie_request);
2042 return reg_call_crda(country_ie_request);
2045 /* This processes *all* regulatory hints */
2046 static void reg_process_hint(struct regulatory_request *reg_request)
2048 struct wiphy *wiphy = NULL;
2049 enum reg_request_treatment treatment;
2051 if (reg_request->wiphy_idx != WIPHY_IDX_INVALID)
2052 wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
2054 switch (reg_request->initiator) {
2055 case NL80211_REGDOM_SET_BY_CORE:
2056 reg_process_hint_core(reg_request);
2058 case NL80211_REGDOM_SET_BY_USER:
2059 treatment = reg_process_hint_user(reg_request);
2060 if (treatment == REG_REQ_IGNORE ||
2061 treatment == REG_REQ_ALREADY_SET ||
2062 treatment == REG_REQ_USER_HINT_HANDLED)
2064 queue_delayed_work(system_power_efficient_wq,
2065 ®_timeout, msecs_to_jiffies(3142));
2067 case NL80211_REGDOM_SET_BY_DRIVER:
2070 treatment = reg_process_hint_driver(wiphy, reg_request);
2072 case NL80211_REGDOM_SET_BY_COUNTRY_IE:
2075 treatment = reg_process_hint_country_ie(wiphy, reg_request);
2078 WARN(1, "invalid initiator %d\n", reg_request->initiator);
2082 /* This is required so that the orig_* parameters are saved */
2083 if (treatment == REG_REQ_ALREADY_SET && wiphy &&
2084 wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
2085 wiphy_update_regulatory(wiphy, reg_request->initiator);
2086 reg_check_channels();
2092 reg_free_request(reg_request);
2096 * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_*
2097 * Regulatory hints come on a first come first serve basis and we
2098 * must process each one atomically.
2100 static void reg_process_pending_hints(void)
2102 struct regulatory_request *reg_request, *lr;
2104 lr = get_last_request();
2106 /* When last_request->processed becomes true this will be rescheduled */
2107 if (lr && !lr->processed) {
2108 reg_process_hint(lr);
2112 spin_lock(®_requests_lock);
2114 if (list_empty(®_requests_list)) {
2115 spin_unlock(®_requests_lock);
2119 reg_request = list_first_entry(®_requests_list,
2120 struct regulatory_request,
2122 list_del_init(®_request->list);
2124 spin_unlock(®_requests_lock);
2126 reg_process_hint(reg_request);
2129 /* Processes beacon hints -- this has nothing to do with country IEs */
2130 static void reg_process_pending_beacon_hints(void)
2132 struct cfg80211_registered_device *rdev;
2133 struct reg_beacon *pending_beacon, *tmp;
2135 /* This goes through the _pending_ beacon list */
2136 spin_lock_bh(®_pending_beacons_lock);
2138 list_for_each_entry_safe(pending_beacon, tmp,
2139 ®_pending_beacons, list) {
2140 list_del_init(&pending_beacon->list);
2142 /* Applies the beacon hint to current wiphys */
2143 list_for_each_entry(rdev, &cfg80211_rdev_list, list)
2144 wiphy_update_new_beacon(&rdev->wiphy, pending_beacon);
2146 /* Remembers the beacon hint for new wiphys or reg changes */
2147 list_add_tail(&pending_beacon->list, ®_beacon_list);
2150 spin_unlock_bh(®_pending_beacons_lock);
2153 static void reg_todo(struct work_struct *work)
2156 reg_process_pending_hints();
2157 reg_process_pending_beacon_hints();
2161 static void queue_regulatory_request(struct regulatory_request *request)
2163 request->alpha2[0] = toupper(request->alpha2[0]);
2164 request->alpha2[1] = toupper(request->alpha2[1]);
2166 spin_lock(®_requests_lock);
2167 list_add_tail(&request->list, ®_requests_list);
2168 spin_unlock(®_requests_lock);
2170 schedule_work(®_work);
2174 * Core regulatory hint -- happens during cfg80211_init()
2175 * and when we restore regulatory settings.
2177 static int regulatory_hint_core(const char *alpha2)
2179 struct regulatory_request *request;
2181 request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
2185 request->alpha2[0] = alpha2[0];
2186 request->alpha2[1] = alpha2[1];
2187 request->initiator = NL80211_REGDOM_SET_BY_CORE;
2189 queue_regulatory_request(request);
2195 int regulatory_hint_user(const char *alpha2,
2196 enum nl80211_user_reg_hint_type user_reg_hint_type)
2198 struct regulatory_request *request;
2200 if (WARN_ON(!alpha2))
2203 request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
2207 request->wiphy_idx = WIPHY_IDX_INVALID;
2208 request->alpha2[0] = alpha2[0];
2209 request->alpha2[1] = alpha2[1];
2210 request->initiator = NL80211_REGDOM_SET_BY_USER;
2211 request->user_reg_hint_type = user_reg_hint_type;
2213 queue_regulatory_request(request);
2218 int regulatory_hint_indoor_user(void)
2220 struct regulatory_request *request;
2222 request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
2226 request->wiphy_idx = WIPHY_IDX_INVALID;
2227 request->initiator = NL80211_REGDOM_SET_BY_USER;
2228 request->user_reg_hint_type = NL80211_USER_REG_HINT_INDOOR;
2229 queue_regulatory_request(request);
2235 int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
2237 struct regulatory_request *request;
2239 if (WARN_ON(!alpha2 || !wiphy))
2242 wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
2244 request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
2248 request->wiphy_idx = get_wiphy_idx(wiphy);
2250 request->alpha2[0] = alpha2[0];
2251 request->alpha2[1] = alpha2[1];
2252 request->initiator = NL80211_REGDOM_SET_BY_DRIVER;
2254 queue_regulatory_request(request);
2258 EXPORT_SYMBOL(regulatory_hint);
2260 void regulatory_hint_country_ie(struct wiphy *wiphy, enum ieee80211_band band,
2261 const u8 *country_ie, u8 country_ie_len)
2264 enum environment_cap env = ENVIRON_ANY;
2265 struct regulatory_request *request = NULL, *lr;
2267 /* IE len must be evenly divisible by 2 */
2268 if (country_ie_len & 0x01)
2271 if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
2274 request = kzalloc(sizeof(*request), GFP_KERNEL);
2278 alpha2[0] = country_ie[0];
2279 alpha2[1] = country_ie[1];
2281 if (country_ie[2] == 'I')
2282 env = ENVIRON_INDOOR;
2283 else if (country_ie[2] == 'O')
2284 env = ENVIRON_OUTDOOR;
2287 lr = get_last_request();
2293 * We will run this only upon a successful connection on cfg80211.
2294 * We leave conflict resolution to the workqueue, where can hold
2297 if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
2298 lr->wiphy_idx != WIPHY_IDX_INVALID)
2301 request->wiphy_idx = get_wiphy_idx(wiphy);
2302 request->alpha2[0] = alpha2[0];
2303 request->alpha2[1] = alpha2[1];
2304 request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE;
2305 request->country_ie_env = env;
2307 queue_regulatory_request(request);
2314 static void restore_alpha2(char *alpha2, bool reset_user)
2316 /* indicates there is no alpha2 to consider for restoration */
2320 /* The user setting has precedence over the module parameter */
2321 if (is_user_regdom_saved()) {
2322 /* Unless we're asked to ignore it and reset it */
2324 REG_DBG_PRINT("Restoring regulatory settings including user preference\n");
2325 user_alpha2[0] = '9';
2326 user_alpha2[1] = '7';
2329 * If we're ignoring user settings, we still need to
2330 * check the module parameter to ensure we put things
2331 * back as they were for a full restore.
2333 if (!is_world_regdom(ieee80211_regdom)) {
2334 REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n",
2335 ieee80211_regdom[0], ieee80211_regdom[1]);
2336 alpha2[0] = ieee80211_regdom[0];
2337 alpha2[1] = ieee80211_regdom[1];
2340 REG_DBG_PRINT("Restoring regulatory settings while preserving user preference for: %c%c\n",
2341 user_alpha2[0], user_alpha2[1]);
2342 alpha2[0] = user_alpha2[0];
2343 alpha2[1] = user_alpha2[1];
2345 } else if (!is_world_regdom(ieee80211_regdom)) {
2346 REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n",
2347 ieee80211_regdom[0], ieee80211_regdom[1]);
2348 alpha2[0] = ieee80211_regdom[0];
2349 alpha2[1] = ieee80211_regdom[1];
2351 REG_DBG_PRINT("Restoring regulatory settings\n");
2354 static void restore_custom_reg_settings(struct wiphy *wiphy)
2356 struct ieee80211_supported_band *sband;
2357 enum ieee80211_band band;
2358 struct ieee80211_channel *chan;
2361 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
2362 sband = wiphy->bands[band];
2365 for (i = 0; i < sband->n_channels; i++) {
2366 chan = &sband->channels[i];
2367 chan->flags = chan->orig_flags;
2368 chan->max_antenna_gain = chan->orig_mag;
2369 chan->max_power = chan->orig_mpwr;
2370 chan->beacon_found = false;
2376 * Restoring regulatory settings involves ingoring any
2377 * possibly stale country IE information and user regulatory
2378 * settings if so desired, this includes any beacon hints
2379 * learned as we could have traveled outside to another country
2380 * after disconnection. To restore regulatory settings we do
2381 * exactly what we did at bootup:
2383 * - send a core regulatory hint
2384 * - send a user regulatory hint if applicable
2386 * Device drivers that send a regulatory hint for a specific country
2387 * keep their own regulatory domain on wiphy->regd so that does does
2388 * not need to be remembered.
2390 static void restore_regulatory_settings(bool reset_user)
2393 char world_alpha2[2];
2394 struct reg_beacon *reg_beacon, *btmp;
2395 struct regulatory_request *reg_request, *tmp;
2396 LIST_HEAD(tmp_reg_req_list);
2397 struct cfg80211_registered_device *rdev;
2401 reg_is_indoor = false;
2403 reset_regdomains(true, &world_regdom);
2404 restore_alpha2(alpha2, reset_user);
2407 * If there's any pending requests we simply
2408 * stash them to a temporary pending queue and
2409 * add then after we've restored regulatory
2412 spin_lock(®_requests_lock);
2413 list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) {
2414 if (reg_request->initiator != NL80211_REGDOM_SET_BY_USER)
2416 list_move_tail(®_request->list, &tmp_reg_req_list);
2418 spin_unlock(®_requests_lock);
2420 /* Clear beacon hints */
2421 spin_lock_bh(®_pending_beacons_lock);
2422 list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) {
2423 list_del(®_beacon->list);
2426 spin_unlock_bh(®_pending_beacons_lock);
2428 list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) {
2429 list_del(®_beacon->list);
2433 /* First restore to the basic regulatory settings */
2434 world_alpha2[0] = cfg80211_world_regdom->alpha2[0];
2435 world_alpha2[1] = cfg80211_world_regdom->alpha2[1];
2437 list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
2438 if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG)
2439 restore_custom_reg_settings(&rdev->wiphy);
2442 regulatory_hint_core(world_alpha2);
2445 * This restores the ieee80211_regdom module parameter
2446 * preference or the last user requested regulatory
2447 * settings, user regulatory settings takes precedence.
2449 if (is_an_alpha2(alpha2))
2450 regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER);
2452 spin_lock(®_requests_lock);
2453 list_splice_tail_init(&tmp_reg_req_list, ®_requests_list);
2454 spin_unlock(®_requests_lock);
2456 REG_DBG_PRINT("Kicking the queue\n");
2458 schedule_work(®_work);
2461 void regulatory_hint_disconnect(void)
2463 REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n");
2464 restore_regulatory_settings(false);
2467 static bool freq_is_chan_12_13_14(u16 freq)
2469 if (freq == ieee80211_channel_to_frequency(12, IEEE80211_BAND_2GHZ) ||
2470 freq == ieee80211_channel_to_frequency(13, IEEE80211_BAND_2GHZ) ||
2471 freq == ieee80211_channel_to_frequency(14, IEEE80211_BAND_2GHZ))
2476 static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan)
2478 struct reg_beacon *pending_beacon;
2480 list_for_each_entry(pending_beacon, ®_pending_beacons, list)
2481 if (beacon_chan->center_freq ==
2482 pending_beacon->chan.center_freq)
2487 int regulatory_hint_found_beacon(struct wiphy *wiphy,
2488 struct ieee80211_channel *beacon_chan,
2491 struct reg_beacon *reg_beacon;
2494 if (beacon_chan->beacon_found ||
2495 beacon_chan->flags & IEEE80211_CHAN_RADAR ||
2496 (beacon_chan->band == IEEE80211_BAND_2GHZ &&
2497 !freq_is_chan_12_13_14(beacon_chan->center_freq)))
2500 spin_lock_bh(®_pending_beacons_lock);
2501 processing = pending_reg_beacon(beacon_chan);
2502 spin_unlock_bh(®_pending_beacons_lock);
2507 reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp);
2511 REG_DBG_PRINT("Found new beacon on frequency: %d MHz (Ch %d) on %s\n",
2512 beacon_chan->center_freq,
2513 ieee80211_frequency_to_channel(beacon_chan->center_freq),
2516 memcpy(®_beacon->chan, beacon_chan,
2517 sizeof(struct ieee80211_channel));
2520 * Since we can be called from BH or and non-BH context
2521 * we must use spin_lock_bh()
2523 spin_lock_bh(®_pending_beacons_lock);
2524 list_add_tail(®_beacon->list, ®_pending_beacons);
2525 spin_unlock_bh(®_pending_beacons_lock);
2527 schedule_work(®_work);
2532 static void print_rd_rules(const struct ieee80211_regdomain *rd)
2535 const struct ieee80211_reg_rule *reg_rule = NULL;
2536 const struct ieee80211_freq_range *freq_range = NULL;
2537 const struct ieee80211_power_rule *power_rule = NULL;
2538 char bw[32], cac_time[32];
2540 pr_info(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n");
2542 for (i = 0; i < rd->n_reg_rules; i++) {
2543 reg_rule = &rd->reg_rules[i];
2544 freq_range = ®_rule->freq_range;
2545 power_rule = ®_rule->power_rule;
2547 if (reg_rule->flags & NL80211_RRF_AUTO_BW)
2548 snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
2549 freq_range->max_bandwidth_khz,
2550 reg_get_max_bandwidth(rd, reg_rule));
2552 snprintf(bw, sizeof(bw), "%d KHz",
2553 freq_range->max_bandwidth_khz);
2555 if (reg_rule->flags & NL80211_RRF_DFS)
2556 scnprintf(cac_time, sizeof(cac_time), "%u s",
2557 reg_rule->dfs_cac_ms/1000);
2559 scnprintf(cac_time, sizeof(cac_time), "N/A");
2563 * There may not be documentation for max antenna gain
2564 * in certain regions
2566 if (power_rule->max_antenna_gain)
2567 pr_info(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n",
2568 freq_range->start_freq_khz,
2569 freq_range->end_freq_khz,
2571 power_rule->max_antenna_gain,
2572 power_rule->max_eirp,
2575 pr_info(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n",
2576 freq_range->start_freq_khz,
2577 freq_range->end_freq_khz,
2579 power_rule->max_eirp,
2584 bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region)
2586 switch (dfs_region) {
2587 case NL80211_DFS_UNSET:
2588 case NL80211_DFS_FCC:
2589 case NL80211_DFS_ETSI:
2590 case NL80211_DFS_JP:
2593 REG_DBG_PRINT("Ignoring uknown DFS master region: %d\n",
2599 static void print_regdomain(const struct ieee80211_regdomain *rd)
2601 struct regulatory_request *lr = get_last_request();
2603 if (is_intersected_alpha2(rd->alpha2)) {
2604 if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
2605 struct cfg80211_registered_device *rdev;
2606 rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx);
2608 pr_info("Current regulatory domain updated by AP to: %c%c\n",
2609 rdev->country_ie_alpha2[0],
2610 rdev->country_ie_alpha2[1]);
2612 pr_info("Current regulatory domain intersected:\n");
2614 pr_info("Current regulatory domain intersected:\n");
2615 } else if (is_world_regdom(rd->alpha2)) {
2616 pr_info("World regulatory domain updated:\n");
2618 if (is_unknown_alpha2(rd->alpha2))
2619 pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n");
2621 if (reg_request_cell_base(lr))
2622 pr_info("Regulatory domain changed to country: %c%c by Cell Station\n",
2623 rd->alpha2[0], rd->alpha2[1]);
2625 pr_info("Regulatory domain changed to country: %c%c\n",
2626 rd->alpha2[0], rd->alpha2[1]);
2630 pr_info(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region));
2634 static void print_regdomain_info(const struct ieee80211_regdomain *rd)
2636 pr_info("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]);
2640 static int reg_set_rd_core(const struct ieee80211_regdomain *rd)
2642 if (!is_world_regdom(rd->alpha2))
2644 update_world_regdomain(rd);
2648 static int reg_set_rd_user(const struct ieee80211_regdomain *rd,
2649 struct regulatory_request *user_request)
2651 const struct ieee80211_regdomain *intersected_rd = NULL;
2653 if (!regdom_changes(rd->alpha2))
2656 if (!is_valid_rd(rd)) {
2657 pr_err("Invalid regulatory domain detected:\n");
2658 print_regdomain_info(rd);
2662 if (!user_request->intersect) {
2663 reset_regdomains(false, rd);
2667 intersected_rd = regdom_intersect(rd, get_cfg80211_regdom());
2668 if (!intersected_rd)
2673 reset_regdomains(false, intersected_rd);
2678 static int reg_set_rd_driver(const struct ieee80211_regdomain *rd,
2679 struct regulatory_request *driver_request)
2681 const struct ieee80211_regdomain *regd;
2682 const struct ieee80211_regdomain *intersected_rd = NULL;
2683 const struct ieee80211_regdomain *tmp;
2684 struct wiphy *request_wiphy;
2686 if (is_world_regdom(rd->alpha2))
2689 if (!regdom_changes(rd->alpha2))
2692 if (!is_valid_rd(rd)) {
2693 pr_err("Invalid regulatory domain detected:\n");
2694 print_regdomain_info(rd);
2698 request_wiphy = wiphy_idx_to_wiphy(driver_request->wiphy_idx);
2699 if (!request_wiphy) {
2700 queue_delayed_work(system_power_efficient_wq,
2705 if (!driver_request->intersect) {
2706 if (request_wiphy->regd)
2709 regd = reg_copy_regd(rd);
2711 return PTR_ERR(regd);
2713 rcu_assign_pointer(request_wiphy->regd, regd);
2714 reset_regdomains(false, rd);
2718 intersected_rd = regdom_intersect(rd, get_cfg80211_regdom());
2719 if (!intersected_rd)
2723 * We can trash what CRDA provided now.
2724 * However if a driver requested this specific regulatory
2725 * domain we keep it for its private use
2727 tmp = get_wiphy_regdom(request_wiphy);
2728 rcu_assign_pointer(request_wiphy->regd, rd);
2729 rcu_free_regdom(tmp);
2733 reset_regdomains(false, intersected_rd);
2738 static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd,
2739 struct regulatory_request *country_ie_request)
2741 struct wiphy *request_wiphy;
2743 if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) &&
2744 !is_unknown_alpha2(rd->alpha2))
2748 * Lets only bother proceeding on the same alpha2 if the current
2749 * rd is non static (it means CRDA was present and was used last)
2750 * and the pending request came in from a country IE
2753 if (!is_valid_rd(rd)) {
2754 pr_err("Invalid regulatory domain detected:\n");
2755 print_regdomain_info(rd);
2759 request_wiphy = wiphy_idx_to_wiphy(country_ie_request->wiphy_idx);
2760 if (!request_wiphy) {
2761 queue_delayed_work(system_power_efficient_wq,
2766 if (country_ie_request->intersect)
2769 reset_regdomains(false, rd);
2774 * Use this call to set the current regulatory domain. Conflicts with
2775 * multiple drivers can be ironed out later. Caller must've already
2776 * kmalloc'd the rd structure.
2778 int set_regdom(const struct ieee80211_regdomain *rd)
2780 struct regulatory_request *lr;
2781 bool user_reset = false;
2784 if (!reg_is_valid_request(rd->alpha2)) {
2789 lr = get_last_request();
2791 /* Note that this doesn't update the wiphys, this is done below */
2792 switch (lr->initiator) {
2793 case NL80211_REGDOM_SET_BY_CORE:
2794 r = reg_set_rd_core(rd);
2796 case NL80211_REGDOM_SET_BY_USER:
2797 r = reg_set_rd_user(rd, lr);
2800 case NL80211_REGDOM_SET_BY_DRIVER:
2801 r = reg_set_rd_driver(rd, lr);
2803 case NL80211_REGDOM_SET_BY_COUNTRY_IE:
2804 r = reg_set_rd_country_ie(rd, lr);
2807 WARN(1, "invalid initiator %d\n", lr->initiator);
2814 reg_set_request_processed();
2817 /* Back to world regulatory in case of errors */
2818 restore_regulatory_settings(user_reset);
2825 /* This would make this whole thing pointless */
2826 if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom()))
2829 /* update all wiphys now with the new established regulatory domain */
2830 update_all_wiphy_regulatory(lr->initiator);
2832 print_regdomain(get_cfg80211_regdom());
2834 nl80211_send_reg_change_event(lr);
2836 reg_set_request_processed();
2841 void wiphy_regulatory_register(struct wiphy *wiphy)
2843 struct regulatory_request *lr;
2845 if (!reg_dev_ignore_cell_hint(wiphy))
2846 reg_num_devs_support_basehint++;
2848 lr = get_last_request();
2849 wiphy_update_regulatory(wiphy, lr->initiator);
2852 void wiphy_regulatory_deregister(struct wiphy *wiphy)
2854 struct wiphy *request_wiphy = NULL;
2855 struct regulatory_request *lr;
2857 lr = get_last_request();
2859 if (!reg_dev_ignore_cell_hint(wiphy))
2860 reg_num_devs_support_basehint--;
2862 rcu_free_regdom(get_wiphy_regdom(wiphy));
2863 RCU_INIT_POINTER(wiphy->regd, NULL);
2866 request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
2868 if (!request_wiphy || request_wiphy != wiphy)
2871 lr->wiphy_idx = WIPHY_IDX_INVALID;
2872 lr->country_ie_env = ENVIRON_ANY;
2875 static void reg_timeout_work(struct work_struct *work)
2877 REG_DBG_PRINT("Timeout while waiting for CRDA to reply, restoring regulatory settings\n");
2879 restore_regulatory_settings(true);
2884 * See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for
2885 * UNII band definitions
2887 int cfg80211_get_unii(int freq)
2890 if (freq >= 5150 && freq <= 5250)
2894 if (freq > 5250 && freq <= 5350)
2898 if (freq > 5350 && freq <= 5470)
2902 if (freq > 5470 && freq <= 5725)
2906 if (freq > 5725 && freq <= 5825)
2912 bool regulatory_indoor_allowed(void)
2914 return reg_is_indoor;
2917 int __init regulatory_init(void)
2921 reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0);
2922 if (IS_ERR(reg_pdev))
2923 return PTR_ERR(reg_pdev);
2925 spin_lock_init(®_requests_lock);
2926 spin_lock_init(®_pending_beacons_lock);
2928 reg_regdb_size_check();
2930 rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom);
2932 user_alpha2[0] = '9';
2933 user_alpha2[1] = '7';
2935 /* We always try to get an update for the static regdomain */
2936 err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
2941 * N.B. kobject_uevent_env() can fail mainly for when we're out
2942 * memory which is handled and propagated appropriately above
2943 * but it can also fail during a netlink_broadcast() or during
2944 * early boot for call_usermodehelper(). For now treat these
2945 * errors as non-fatal.
2947 pr_err("kobject_uevent_env() was unable to call CRDA during init\n");
2951 * Finally, if the user set the module parameter treat it
2954 if (!is_world_regdom(ieee80211_regdom))
2955 regulatory_hint_user(ieee80211_regdom,
2956 NL80211_USER_REG_HINT_USER);
2961 void regulatory_exit(void)
2963 struct regulatory_request *reg_request, *tmp;
2964 struct reg_beacon *reg_beacon, *btmp;
2966 cancel_work_sync(®_work);
2967 cancel_delayed_work_sync(®_timeout);
2968 cancel_delayed_work_sync(®_check_chans);
2970 /* Lock to suppress warnings */
2972 reset_regdomains(true, NULL);
2975 dev_set_uevent_suppress(®_pdev->dev, true);
2977 platform_device_unregister(reg_pdev);
2979 list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) {
2980 list_del(®_beacon->list);
2984 list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) {
2985 list_del(®_beacon->list);
2989 list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) {
2990 list_del(®_request->list);