1 # ====================================================================
3 # innovator_eth_drivers.cdl
5 # Ethernet drivers - support for LAN91CXX ethernet controller
6 # on the BSE Innovator/SA1110 board.
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
44 # Author(s): Jordi Colomer <jco@ict.es>, Patrick Doyle <wpd@delcomsys.com>
45 # Contributors: Patrick Doyle <wpd@delcomsys.com>
48 #####DESCRIPTIONEND####
50 # ====================================================================
52 cdl_package CYGPKG_DEVS_ETH_ARM_INNOVATOR {
53 display "Innovator SMC91C96 ethernet driver"
55 parent CYGPKG_IO_ETH_DRIVERS
56 active_if CYGPKG_IO_ETH_DRIVERS
57 active_if CYGPKG_HAL_ARM_ARM9_INNOVATOR
61 description "Ethernet driver for Innovator boards."
63 # Arguably this should do in the generic package
64 # but then there is a logic loop so you can never enable it.
66 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED {
67 display "SMSC LAN91CXX driver required"
71 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
72 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_INL <cyg/io/devs_eth_innovator.inl>"
73 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_CFG <pkgconf/devs_eth_arm_innovator.h>"
74 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
77 cdl_component CYGPKG_DEVS_ETH_ARM_INNOVATOR_ETH0 {
78 display "Innovator ethernet port driver"
82 This option includes the ethernet device driver for the
85 implements CYGHWR_NET_DRIVERS
86 implements CYGHWR_NET_DRIVER_ETH0
87 implements CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED
89 cdl_option CYGDAT_DEVS_ETH_ARM_INNOVATOR_ETH0_NAME {
90 display "Device name for the ETH0 ethernet driver"
92 default_value {"\"eth0\""}
94 This option sets the name of the ethernet device."
97 cdl_component CYGSEM_DEVS_ETH_ARM_INNOVATOR_ETH0_SET_ESA {
98 display "Set the ethernet station address"
101 description "Enabling this option will allow the ethernet
102 station address to be forced to the value set by the
103 configuration. This may be required if the hardware does
104 not include a serial EEPROM for the ESA."
106 cdl_option CYGDAT_DEVS_ETH_ARM_INNOVATOR_ETH0_ESA {
107 display "The ethernet station address (MAC)"
109 default_value {"{0x12, 0x13, 0x14, 0x15, 0x16, 0x17}"}
110 description "A static ethernet station address.
111 Caution: Booting two systems with the same MAC on the same
112 network, will cause severe conflicts."