1 //==========================================================================
5 // Flash programming to support NAND flash on Freescale MXC platforms
7 //==========================================================================
8 //####ECOSGPLCOPYRIGHTBEGIN####
9 // -------------------------------------------
10 // This file is part of eCos, the Embedded Configurable Operating System.
11 // Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
13 // eCos is free software; you can redistribute it and/or modify it under
14 // the terms of the GNU General Public License as published by the Free
15 // Software Foundation; either version 2 or (at your option) any later version.
17 // eCos is distributed in the hope that it will be useful, but WITHOUT ANY
18 // WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
22 // You should have received a copy of the GNU General Public License along
23 // with eCos; if not, write to the Free Software Foundation, Inc.,
24 // 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26 // As a special exception, if other files instantiate templates or use macros
27 // or inline functions from this file, or you compile this file and link it
28 // with other works to produce a work based on this file, this file does not
29 // by itself cause the resulting work to be covered by the GNU General Public
30 // License. However the source code for this file must still be made available
31 // in accordance with section (3) of the GNU General Public License.
33 // This exception does not invalidate any other reasons why a work based on
34 // this file might be covered by the GNU General Public License.
36 // Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
37 // at http://sources.redhat.com/ecos/ecos-license/
38 // -------------------------------------------
39 //####ECOSGPLCOPYRIGHTEND####
40 //==========================================================================
41 //#####DESCRIPTIONBEGIN####
43 // Author(s): Kevin Zhang <k.zhang@freescale.com>
44 // Contributors: Kevin Zhang <k.zhang@freescale.com>
45 // Date: 2006-01-23 Initial version
46 // Date: 2007-12-20 Update to support 4K page and bbt management.
49 // -- Add bad block management according to Linux NAND MTD implementation.
50 // Reference linux/drivers/mtd/nand/nand_bbt.c by Thomas Gleixner
52 // 1. Last 4 blocks are reserved for one main BBT and one
53 // mirror BBT (2 spare ones just in case a block turns bad.)
54 // 2. The main BBT block's spare area starts with "Bbt0" followed
55 // by a version number starting from 1.
56 // 3. The mirror BBT block's spare area starts with "1tbB" followed
57 // by a version number also starting from 1.
58 // 4. The actual main area, starting from first page in the BBT block,
59 // is used to indicate if a block is bad or not through 2bit/block:
60 // * The table uses 2 bits per block
61 // * 11b: block is good
62 // * 00b: block is factory marked bad
63 // * 01b: block is marked bad due to wear
64 // * 10b: block is marked reserved (for BBT)
65 // Redboot operations: During boot, it searches for the marker for
66 // either main BBT or mirror BBT based on the marker:
67 // case 1: Neither table is found:
68 // Do the bad block scan of the whole flash with ECC off. Use
69 // manufactor marked BI field to decide if a block is bad and
70 // then build the BBT in RAM. Then write this table to both
71 // main BBT block and mirror BBT block.
72 // case 2: Only one table is found:
73 // Load the BBT from the flash and stored in the RAM.
74 // Then build the 2nd BBT in the flash.
75 // case 3: If both tables found, load the one with higher version in the
76 // RAM and then update the block with older BBT info with the
77 // newer one. If same version, just then read out the table in
80 //####DESCRIPTIONEND####
82 //==========================================================================
84 #include <pkgconf/hal.h>
85 #include <cyg/hal/hal_arch.h>
86 #include <cyg/hal/hal_cache.h>
87 #include <cyg/io/nand_bbt.h>
91 #include CYGHWR_MEMORY_LAYOUT_H
93 #include <cyg/hal/hal_io.h>
94 #define _FLASH_PRIVATE_
95 #include <cyg/io/flash.h>
97 #include CYGHWR_FLASH_NAND_BBT_HEADER
99 #include <cyg/io/imx_nfc.h>
101 #define ECC_FORCE_ON 1
102 #define ECC_FORCE_OFF 2
104 typedef u64 flash_addr_t;
114 #define diag_printf1(fmt...) CYG_MACRO_START \
115 if (g_nfc_debug_level >= NFC_DEBUG_MIN) diag_printf(fmt); \
118 #define MXC_UNLOCK_BLK_END 0xFFFF
120 extern unsigned int hal_timer_count(void);
121 int nfc_program_region(flash_addr_t addr, u8 *buf, u32 len);
122 int nfc_erase_region(flash_addr_t addr, u32 len, bool skip_bad, bool verbose);
124 static int nfc_write_pg_random(u32 pg_no, u32 pg_off, u8 *buf, u32 ecc_force);
125 static int nfc_read_pg_random(u32 pg_no, u32 pg_off, u32 ecc_force, u32 cs_line,
126 u32 num_of_nand_chips);
127 static int nfc_erase_blk(u32 ra);
128 static void print_page(u32 addr, bool spare_only);
129 static int nfc_read_page(u32 cs_line, u32 pg_no, u32 pg_off);
130 static int mxc_nfc_scan(bool lowlevel);
131 static void read_nflash_id(u32 *id, u32 cs_line);
132 static int nfc_program_blk(u32 ra, u8 *buf, u32 len);
134 static void print_pkt_16(u16 *pkt, u32 len);
137 static int nand_flash_index = -1;
138 static int g_ecc_enable = true;
139 static int g_spare_only_read_ok = true;
140 static int g_nfc_debug_level = NFC_DEBUG_NONE;
141 static bool g_nfc_debug_measure = false;
142 static bool g_is_2k_page = false;
143 static unsigned int g_block_offset;
144 static bool g_is_4k_page = false;
145 static unsigned int g_nfc_version = MXC_NFC_V1; // default to version 1.0
146 static int num_of_nand_chips = 1;
147 static int num_of_nand_chips_for_nandsize = 1;
148 static int scale_block_cnt = 1;
150 #define nfc_printf(level, args...) CYG_MACRO_START \
151 if (g_nfc_debug_level >= level) \
155 #if defined(NFC_V2_0) || defined(NFC_V2_1)
156 #include <cyg/io/mxc_nfc_v2.h>
157 #elif defined(NFC_V3_0)
158 #include <cyg/io/mxc_nfc_v3.h>
160 #include <cyg/io/mxc_nfc.h>
163 #ifndef NAND_LAUNCH_REG
164 #define NAND_LAUNCH_REG 0xDEADEEEE
165 #define NAND_CONFIGURATION1_REG 0xDEADEEEE
166 #define NFC_FLASH_CONFIG2_REG 0xDEADEEEE
167 #define NFC_FLASH_CONFIG2_ECC_EN 0xDEADEEEE
168 #define write_nfc_ip_reg(a, b)
171 #ifndef MXCFLASH_SELECT_MULTI
172 void flash_query(void *data)
174 void nandflash_query(void *data)
178 read_nflash_id(&id[0], 0);
179 nfc_printf(NFC_DEBUG_MAX, "%s(ID=0x%02x: 0x%02x, 0x%02x, 0x%02x)\n", __FUNCTION__,
180 id[0] & 0xff, (id[0] >> 8) & 0xff, (id[0] >> 16) & 0xff, id[0] >> 24);
181 memcpy(data, id, sizeof(id));
184 #ifndef MXCFLASH_SELECT_MULTI
185 int flash_program_buf(void *addr, void *data, int len)
187 int nandflash_program_buf(void *addr, void *data, int len)
190 nfc_printf(NFC_DEBUG_MAX, "%s(addr=%p, data=%p, len=0x%08x)\n",
191 __FUNCTION__, addr, data, len);
192 return nfc_program_region((u32)addr, data, len);
195 #ifndef MXCFLASH_SELECT_MULTI
196 int flash_erase_block(void *block, unsigned int size)
198 int nandflash_erase_block(void *block, unsigned int size)
201 nfc_printf(NFC_DEBUG_MAX, "%s(block=%p, size=0x%08x)\n",
202 __FUNCTION__, block, size);
203 return nfc_erase_region((u32)block, size, 1, 0);
206 #ifndef MXCFLASH_SELECT_MULTI
207 bool flash_code_overlaps(void *start, void *end)
209 bool nandflash_code_overlaps(void *start, void *end)
212 extern unsigned char _stext[], _etext[];
214 return ((((unsigned long)&_stext >= (unsigned long)start) &&
215 ((unsigned long)&_stext < (unsigned long)end)) ||
216 (((unsigned long)&_etext >= (unsigned long)start) &&
217 ((unsigned long)&_etext < (unsigned long)end)));
220 #ifndef MXCFLASH_SELECT_MULTI
221 int flash_hwr_map_error(int e)
223 int nandflash_hwr_map_error(int e)
229 #ifndef MXCFLASH_SELECT_MULTI
230 int flash_lock_block(void *block)
232 int nandflash_lock_block(void *block)
239 #ifndef MXCFLASH_SELECT_MULTI
240 int flash_unlock_block(void *block, int block_size, int blocks)
242 int nandflash_unlock_block(void *block, int block_size, int blocks)
249 //----------------------------------------------------------------------------
250 // Now that device properties are defined, include magic for defining
251 // accessor type and constants.
252 #include <cyg/io/flash_dev.h>
254 // Information about supported devices
255 typedef struct flash_dev_info {
256 cyg_uint16 device_id;
257 cyg_uint16 device_id2;
258 cyg_uint16 device_id3;
259 cyg_uint16 device_id4;
260 cyg_uint16 page_size;
261 cyg_uint16 spare_size;
262 cyg_uint32 pages_per_block;
263 cyg_uint32 block_size;
264 cyg_int32 block_count;
265 cyg_uint32 device_size;
266 cyg_uint32 port_size; // x8 or x16 IO
267 cyg_uint32 type; // SLC vs MLC
269 cyg_uint32 fis_start_addr;
271 cyg_uint32 bbt_blk_max_nr;
272 cyg_uint8 vendor_info[96];
273 cyg_uint32 col_cycle; // number of column address cycles
274 cyg_uint32 row_cycle; // number of row address cycles
275 cyg_uint32 max_bad_blk;
278 static const flash_dev_info_t *flash_dev_info;
279 static const flash_dev_info_t supported_devices[] = {
280 #include <cyg/io/mxc_nand_parts.inl>
282 #define NUM_DEVICES NUM_ELEMS(supported_devices)
284 #define COL_CYCLE flash_dev_info->col_cycle
285 #define ROW_CYCLE flash_dev_info->row_cycle
286 #define NF_PG_SZ ((flash_dev_info->page_size) * num_of_nand_chips)
287 #define NF_SPARE_SZ ((flash_dev_info->spare_size) * num_of_nand_chips)
288 #define NF_PG_PER_BLK flash_dev_info->pages_per_block
289 #define NF_DEV_SZ ((flash_dev_info->device_size) * num_of_nand_chips_for_nandsize)
290 #define NF_BLK_SZ ((flash_dev_info->block_size) * num_of_nand_chips)
291 #define NF_BLK_CNT ((flash_dev_info->block_count) / scale_block_cnt)
292 #define NF_VEND_INFO flash_dev_info->vendor_info
293 #define NF_OPTIONS flash_dev_info->options
294 #define NF_BBT_MAX_NR flash_dev_info->bbt_blk_max_nr
295 #define NF_OPTIONS flash_dev_info->options
296 #define NF_BI_OFF flash_dev_info->bi_off
298 #define MXC_NAND_ADDR_MASK (NF_DEV_SZ - 1)
299 #define BLOCK_TO_OFFSET(blk) ((blk) * NF_PG_PER_BLK * NF_PG_SZ)
300 #define BLOCK_TO_PAGE(blk) ((blk) * NF_PG_PER_BLK)
301 #define BLOCK_PAGE_TO_OFFSET(blk, pge) (((blk) * NF_PG_PER_BLK + (pge)) * NF_PG_SZ)
302 #define OFFSET_TO_BLOCK(offset) ((u32)((offset) / (NF_PG_SZ * NF_PG_PER_BLK)))
303 #define OFFSET_TO_PAGE(offset) ((u32)((offset) / NF_PG_SZ) % NF_PG_PER_BLK)
305 static u8 *g_bbt, *g_page_buf;
307 static bool mxcnfc_init_ok = false;
308 static bool mxc_nfc_scan_done;
310 // this callback allows the platform specific function to be called right
311 // after flash_dev_query()
312 nfc_setup_func_t *nfc_setup = NULL;
314 // this callback allows the platform specific iomux setup
315 nfc_iomuxsetup_func_t *nfc_iomux_setup = NULL;
317 static flash_addr_t flash_region_start;
318 static flash_addr_t flash_region_end;
319 static int flash_enable;
321 /* This assumes reading the flash with monotonically increasing flash addresses */
322 static flash_addr_t nfc_l_to_p(flash_addr_t addr)
324 if (g_block_offset == 0) {
328 u32 block = (addr & MXC_NAND_ADDR_MASK) / NF_BLK_SZ;
329 u32 offset = addr % NF_BLK_SZ;
331 ra = (block + g_block_offset) * NF_BLK_SZ + offset;
333 nfc_printf(NFC_DEBUG_MIN,
334 "Remapping block %u at addr 0x%08llx to block %u at addr 0x%08llx\n",
335 block, (u64)addr, block + g_block_offset, (u64)ra);
341 static int flash_addr_valid(flash_addr_t addr)
343 if (addr < flash_region_start || addr >= flash_region_end) {
344 diag_printf("Flash address 0x%08llx is outside valid region 0x%08llx..0x%08llx\n",
345 (u64)addr, (u64)flash_region_start, (u64)flash_region_end);
347 return addr >= flash_region_start && addr < flash_region_end;
350 /* FIXME: we should pass flash_addr_t as arguments */
351 void mxc_flash_enable(void *start, void *end)
353 flash_addr_t s = (unsigned long)start & MXC_NAND_ADDR_MASK;
354 flash_addr_t e = (unsigned long)end & MXC_NAND_ADDR_MASK;
356 if (flash_enable++ == 0) {
357 flash_region_start = s;
358 flash_region_end = e;
359 diag_printf1("Enabling flash region 0x%08llx..0x%08llx\n",
363 if (s < flash_region_start ||
364 e > flash_region_end) {
365 diag_printf("** WARNING: Enable 0x%08llx..0x%08llx outside enabled flash region 0x%08llx..0x%08llx\n",
366 (u64)s, (u64)e, (u64)flash_region_start, (u64)flash_region_end);
371 void mxc_flash_disable(void *start, void *end)
373 flash_addr_t s = (unsigned long)start & MXC_NAND_ADDR_MASK;
374 flash_addr_t e = (unsigned long)end & MXC_NAND_ADDR_MASK;
377 if (--flash_enable == 0) {
378 diag_printf1("Disabling flash region 0x%08llx..0x%08llx\n",
380 if (s != flash_region_start ||
381 e != flash_region_end) {
382 diag_printf("** Error: Disable 0x%08llx..0x%08llx not equal to enabled flash region 0x%08llx..0x%08llx\n",
383 (u64)s, (u64)e, (u64)flash_region_start, (u64)flash_region_end);
387 diag_printf("** Error: unbalanced call to flash_disable()\n");
392 #ifndef MXCFLASH_SELECT_MULTI
395 nandflash_hwr_init(void)
401 nfc_printf(NFC_DEBUG_MAX, "%s()\n", __FUNCTION__);
406 NFC_SET_NFC_ACTIVE_CS(0);
407 NFC_CMD_INPUT(FLASH_Reset);
409 // Look through table for device data
410 flash_dev_query(&id[0]);
411 flash_dev_info = supported_devices;
412 for (i = 0; i < NUM_DEVICES; i++) {
413 if ((flash_dev_info->device_id == (id[0] & 0xffff)) &&
414 (flash_dev_info->device_id2 == 0xFFFF ||
415 flash_dev_info->device_id2 == (id[0] >> 16)))
420 // Did we find the device? If not, return error.
421 if (NUM_DEVICES == i) {
422 diag_printf("Unrecognized NAND part: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
423 id[0] & 0xff, (id[0] >> 8) & 0xff, (id[0] >> 16) & 0xff, id[0] >> 24);
424 return FLASH_ERR_DRV_WRONG_PART;
427 nand_flash_index = i;
428 mxcnfc_init_ok = true;
430 if (NF_PG_SZ == 2048) {
432 g_spare_only_read_ok = false;
434 if (NF_PG_SZ == 4096) {
436 g_spare_only_read_ok = false;
439 nfc_printf(NFC_DEBUG_MED, "%s(): %d out of NUM_DEVICES=%d, id=0x%02x\n",
440 __FUNCTION__, i, NUM_DEVICES, flash_dev_info->device_id);
443 g_nfc_version = nfc_setup(NF_PG_SZ / num_of_nand_chips, flash_dev_info->port_size,
444 flash_dev_info->type, num_of_nand_chips);
446 diag_printf1("NFC version: %02x\n", g_nfc_version);
447 if (g_nfc_version == MXC_NFC_V3) {
448 for (i = 2; i <= NUM_OF_CS_LINES; i++) {
450 read_nflash_id(&id_tmp[0], i - 1);
451 if (id[0] != id_tmp[0]) {
454 /* Support interleave with 1, 2, 4, 8 chips */
455 if (i == (num_of_nand_chips * 2)) {
456 num_of_nand_chips = i;
458 NFC_CMD_INPUT(FLASH_Reset);
461 if (nfc_setup && (num_of_nand_chips > 1)) {
462 nfc_setup(NF_PG_SZ / num_of_nand_chips, flash_dev_info->port_size,
463 flash_dev_info->type, num_of_nand_chips);
469 g_bbt_sz = NF_BLK_CNT / 4;
470 g_bbt = malloc(g_bbt_sz); // two bit for each block
472 diag_printf("%s(): failed to allocate %d byte for bbt\n", __FUNCTION__, g_bbt_sz);
473 return FLASH_ERR_PROTOCOL;
476 g_page_buf = malloc(NF_PG_SZ); // for programming less than one page size buffer
477 if (g_page_buf == NULL) {
478 diag_printf("%s(): failed to allocate %d byte page buffer\n", __FUNCTION__,
480 return FLASH_ERR_PROTOCOL;
482 memset(g_bbt, 0, g_bbt_sz);
484 /* For now cap off the Device size to 2GB */
486 while ((i <= num_of_nand_chips) && ((NF_DEV_SZ * i) < 0x80000000)) {
487 num_of_nand_chips_for_nandsize = i;
491 scale_block_cnt = num_of_nand_chips / num_of_nand_chips_for_nandsize;
492 // Hard wired for now
493 flash_info.block_size = NF_BLK_SZ;
494 flash_info.blocks = NF_BLK_CNT - CYGNUM_FLASH_NAND_BBT_BLOCKS;
495 flash_info.start = (void *)MXC_NAND_BASE_DUMMY;
496 flash_info.end = (void *)(MXC_NAND_BASE_DUMMY + NF_DEV_SZ -
497 CYGNUM_FLASH_NAND_BBT_BLOCKS * NF_BLK_SZ);
499 mxc_nfc_scan(false); // look for table
501 diag_printf1("%s(): block_size=0x%08x, blocks=0x%08x, start=%p, end=%p\n",
502 __FUNCTION__, flash_info.block_size, flash_info.blocks,
503 flash_info.start, flash_info.end);
508 // used by redboot/current/src/flash.c
509 int mxc_nand_fis_start(void)
511 return flash_dev_info->fis_start_addr * num_of_nand_chips;
514 static inline u8 get_byte(cyg_uint16 *buf, int offs)
516 cyg_uint16 word = buf[offs >> 1];
523 static inline void store_byte(cyg_uint16 *buf, int offs, u8 val)
525 cyg_uint16 word = buf[offs >> 1];
528 word = (word & 0x00ff) | ((u16)val << 8);
530 word = (word & 0xff00) | val;
532 buf[offs >> 1] = word;
535 static inline bool nfc_verify_addr(unsigned long dst, unsigned long len)
537 if (dst < NAND_MAIN_BUF0 || dst + len >= NAND_SPAR_BUF3 + NFC_SPARE_BUF_SZ) {
538 diag_printf("%s: Bad NFC Buffer address 0x%08lx\n", __FUNCTION__, dst);
544 static void nfc_buf_read(void *dst, unsigned long src, u32 len)
546 u16 *s = (u16 *)(src & ~1);
552 if (src + len < src) {
553 diag_printf("%s: Bad address range 0x%08lx .. 0x%08lx\n", __FUNCTION__,
556 if ((unsigned long)dst + len < (unsigned long)dst) {
557 diag_printf("%s: Bad address range 0x%08lx .. 0x%08lx\n", __FUNCTION__,
558 (unsigned long)dst, (unsigned long)dst + len);
560 if (src < NAND_MAIN_BUF0 || src + len >= NAND_SPAR_BUF3 + NF_PG_SZ) {
561 diag_printf("%s: Bad NFC Buffer address 0x%08lx\n", __FUNCTION__, src);
564 if ((unsigned long)dst >= NAND_MAIN_BUF0 &&
565 (unsigned long)dst < NAND_SPAR_BUF3 + NF_PG_SZ) {
566 diag_printf("%s: Bad memory address 0x%08lx\n", __FUNCTION__,
571 *bp++ = get_byte(s, 1);
575 if ((unsigned long)bp & 1) {
597 static void nfc_buf_write(unsigned long dst, void *src, u32 len)
600 u16 *d = (u16 *)(dst & ~1);
605 if (!nfc_verify_addr(dst, len)) {
609 store_byte(d, 1, *bp);
614 if ((unsigned long)bp & 1) {
618 word |= (u16)(*bp++) << 8;
631 store_byte(d, 1, *bp);
637 * Starts the address input cycles for different operations as defined in ops.
639 * @param ops operations as defined in enum nfc_addr_ops
640 * @param pg_no page number offset from 0
641 * @param pg_off byte offset within the page
642 * @param is_erase don't care for earlier NFC
643 * @param cs_line don't care for earlier NFC
645 static void start_nfc_addr_ops(u32 ops, u32 pg_no, u32 pg_off, u32 is_erase,
646 u32 cs_line, u32 num_of_chips)
652 /* Only supports one NAND chip (CS0) */
657 case FLASH_Read_Mode1:
659 for (i = 0; i < COL_CYCLE; i++, pg_off >>= 8) {
660 NFC_ADDR_INPUT(pg_off & 0xFF);
662 // don't break on purpose
663 case FLASH_Block_Erase:
664 for (i = 0; i < ROW_CYCLE; i++, pg_no >>= 8) {
665 NFC_ADDR_INPUT(pg_no & 0xFF);
669 diag_printf("!!!!!! %s(): wrong ops: %d !!!!!\n", __FUNCTION__, ops);
673 #endif // #ifndef NFC_V3_0
675 static void read_nflash_id(u32 *id, u32 cs_line)
677 volatile u32 *ptr = (volatile u32*)NAND_MAIN_BUF0;
679 nfc_printf(NFC_DEBUG_MIN, "%s: read flash id from chip %d @ %p\n",
680 __FUNCTION__, cs_line, ptr);
682 NFC_PRESET(MXC_UNLOCK_BLK_END);
683 NFC_SET_NFC_ACTIVE_CS(cs_line);
684 NFC_CMD_INPUT(FLASH_Read_ID);
686 start_nfc_addr_ops(FLASH_Read_ID, 0, 0, 0, cs_line, num_of_nand_chips);
687 NFC_DATA_OUTPUT(RAM_BUF_0, FDO_FLASH_ID, g_ecc_enable);
693 static void mark_blk_bad(unsigned int block, unsigned char *buf,
694 enum blk_bad_type bad_type)
696 unsigned int off = block >> 2; // byte offset - each byte can hold status for 4 blocks
697 unsigned int sft = (block & 3) << 1; // bit shift 0, 2, 4, 6
698 unsigned char val = buf[off];
700 if (block > NF_BLK_CNT) {
701 diag_printf("%s: Block number %u out of range: 0..%u\n", __FUNCTION__,
702 block, NF_BLK_CNT - 1);
705 val = (val & ~(3 << sft)) | (bad_type << sft);
710 * Checks to see if a block is bad. If buf is not NULL, it indicates a valid
711 * BBT in the RAM. In this case, it assumes to have 2-bit to represent each
712 * block for good or bad
713 * * 11b: block is good
714 * * 00b: block is factory marked bad
715 * * 01b: block is marked bad due to wear
716 * * 10b: block is marked reserved (for BBT)
717 * If buf is NULL, then it indicates a low level scan based on the certain
718 * offset value in certain pages and certain offset to be non-0xFF. In this
719 * case, the HW ECC will be turned off.
721 * @param block 0-based block number
722 * @param buf BBT buffer. Could be NULL (see above explanation)
724 * @return 1 if bad block; 0 otherwise
726 static int nfc_is_badblock(u32 block, u8 *buf)
728 u32 off; // byte offset
729 u32 sft; // bit shift 0, 2, 4, 6
737 off = block >> 2; // byte offset
738 sft = (block & 3) << 1; // bit shift 0, 2, 4, 6
739 res = (buf[off] >> sft) & 0x3;
741 addr = BLOCK_TO_OFFSET(block);
742 diag_printf1("Block %u at %08llx is marked %s (%d) in BBT@%p[%02x] mask %02x\n",
743 block, (u64)addr, res == BLK_RESERVED ? "reserved" :
744 res == BLK_BAD_FACTORY ? "factory bad" : "runtime bad",
745 res, buf, off, 3 << sft);
750 // need to do low level scan with ECC off
751 if (NF_OPTIONS & NAND_BBT_SCANLSTPAGE) {
752 if (g_is_4k_page || g_is_2k_page) {
753 addr = (block + 1) * NF_BLK_SZ - NF_PG_SZ;
754 pg_no = addr / NF_PG_SZ;
755 for (i = 0; i < num_of_nand_chips; i++) {
756 // we don't do partial page read here. No ecc either
757 nfc_read_pg_random(pg_no, 0, ECC_FORCE_OFF, i, num_of_nand_chips);
758 temp = readw((u32)NAND_MAIN_BUF0 + NF_BI_OFF);
759 if ((temp & 0xFF) != 0xFF) {
760 return BLK_BAD_FACTORY;
764 diag_printf("only 2K/4K page is supported\n");
765 // die here -- need to fix the SW
770 addr = block * NF_BLK_SZ;
771 pg_no = addr / NF_PG_SZ;
772 for (i = 0; i < num_of_nand_chips; i++) {
773 nfc_read_pg_random(pg_no, 0, ECC_FORCE_OFF, i, num_of_nand_chips); // no ecc
774 if (g_is_2k_page || g_is_4k_page) {
775 temp = readw(NAND_MAIN_BUF0 + NF_BI_OFF);
777 temp = readw(NAND_SPAR_BUF0 + 4) >> 8; // BI is at 5th byte in spare area
779 if ((temp & 0xFF) != 0xFF) {
780 return BLK_BAD_FACTORY;
783 if (NF_OPTIONS & NAND_BBT_SCAN2NDPAGE) {
786 for (i = 0; i < num_of_nand_chips; i++) {
787 nfc_read_pg_random(pg_no, 0, ECC_FORCE_OFF, i, num_of_nand_chips); // no ecc
788 if (g_is_2k_page || g_is_4k_page) {
789 temp = readw(NAND_MAIN_BUF0 + NF_BI_OFF);
791 temp = readw(NAND_SPAR_BUF0 + 4) >> 8; // BI is at 5th byte in spare area
793 if ((temp & 0xFF) != 0xFF) {
794 return BLK_BAD_FACTORY;
802 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
803 * @buf: the buffer to search
804 * @td: search pattern descriptor
806 * Check for a pattern at the given place. Used to search bad block
807 * tables and good / bad block identifiers.
809 static int check_short_pattern(void *buf, struct nand_bbt_descr *td)
813 for (i = 0; i < td->len; i++) {
814 if (get_byte(buf, td->offs + i) != td->pattern[i]) {
821 static int nfc_write_page(u32 pg_no, u32 pg_off, u32 ecc_force);
823 * Program g_bbt into the NAND block with offset at g_main_bbt_addr.
824 * This assumes that the g_bbt has been built already.
826 * If g_main_bbt_addr is 0, search for a free block from the bottom 4 blocks (but make
827 * sure not re-using the mirror block). If g_mirror_bbt_page is 0, do the same thing.
828 * Otherwise, just use g_main_bbt_addr, g_mirror_bbt_page numbers to prgram the
829 * g_bbt into those two blocks.
830 * todo: need to do the version to see which one is newer.
832 * @return 0 if successful; -1 otherwise.
834 static int mxc_nfc_write_bbt_page(struct nand_bbt_descr *td)
837 u32 block = td->pages / NF_PG_PER_BLK;
838 flash_addr_t addr = td->pages * NF_PG_SZ;
840 ret = nfc_erase_blk(addr);
842 diag_printf("Failed to erase bbt block %u\n", block);
845 ret = nfc_write_page(td->pages, 0, 0);
847 diag_printf("Failed to write bbt block %u\n", block);
850 mark_blk_bad(block, g_bbt, BLK_RESERVED);
854 static inline void mxc_nfc_buf_clear(unsigned long buf, u8 pattern, int size)
860 fill = (fill << 8) | pattern;
861 for (i = 0; i < size >> 1; i++) {
866 static int mxc_nfc_write_bbt(struct nand_bbt_descr *td, struct nand_bbt_descr *md)
872 u16 *buf = (u16 *)NAND_MAIN_BUF0;
874 for (block = NF_BLK_CNT - 1; block >= NF_BLK_CNT - td->maxblocks - 1; block--) {
875 int pg = block * NF_PG_PER_BLK;
877 if ((nfc_is_badblock(block, g_bbt) & 1) == 0) {
878 if (md != NULL && md->pages == pg) {
888 mxc_nfc_buf_clear(NAND_SPAR_BUF0, 0xff, NF_SPARE_SZ);
889 mxc_nfc_buf_clear(NAND_MAIN_BUF0, 0xff, NF_PG_SZ);
890 diag_printf1("%s: Updating bbt %c%c%c%c version %d\n", __FUNCTION__,
891 td->pattern[0], td->pattern[1], td->pattern[2], td->pattern[3], td->version);
892 nfc_buf_write(NAND_SPAR_BUF0 + td->offs, td->pattern, td->len);
893 store_byte((u16 *)NAND_SPAR_BUF0, td->veroffs, td->version);
895 for (block = 0, pg_offs = 0; block < NF_BLK_CNT; pg_offs++) {
899 if (pg_offs << 1 >= NF_PG_SZ) {
900 ret = mxc_nfc_write_bbt_page(td);
905 mxc_nfc_buf_clear(NAND_SPAR_BUF0, 0xff, NF_SPARE_SZ);
906 mxc_nfc_buf_clear(NAND_MAIN_BUF0, 0xff, NF_PG_SZ);
909 for (i = 0; i < 16 && block < NF_BLK_CNT; i += 2, block++) {
910 u8 code = nfc_is_badblock(block, g_bbt);
911 if ((code & 1) != 0) {
913 diag_printf1("%s: bad block %u pattern[%p] 0x%04x mask 0x%04x\n", __FUNCTION__,
914 block, &buf[pg_offs], tmp, 0x03 << i);
920 diag_printf1("%s: Writing final bbt block %d page %d\n", __FUNCTION__,
921 td->pages / NF_PG_PER_BLK, page);
922 ret = mxc_nfc_write_bbt_page(td);
927 static int mxc_nfc_update_bbt(struct nand_bbt_descr *td, struct nand_bbt_descr *md)
934 if (td->pages < 0 && (md == NULL || md->pages == -1)) {
937 if (md != NULL && md->pages >= 0) {
938 if (md->version >= td->version) {
939 td->version = ++md->version;
941 md->version = ++td->version;
947 ret = mxc_nfc_write_bbt(td, md);
949 diag_printf("** Error: Failed to update main BBT\n");
952 ret = mxc_nfc_write_bbt(md, td);
954 diag_printf("** Error: Failed to update mirror BBT\n");
960 static int program_bbt_to_flash(void)
962 return mxc_nfc_update_bbt(g_mxc_nfc_bbt_main_descr, g_mxc_nfc_bbt_mirror_descr);
966 * Unconditionally erase a block without checking the BI field.
967 * Note that there is NO error checking for passed-in ra.
969 * @param ra starting address in the raw address space (offset)
970 * Must be block-aligned
971 * @return 0 if successful; -1 otherwise
973 static int nfc_erase_blk(u32 ra)
978 if (g_nfc_version == MXC_NFC_V3) {
979 // combine the two commands for erase
980 writel((FLASH_Start_Erase << 8) | FLASH_Block_Erase, NAND_CMD_REG);
981 pg_no = ra / NF_PG_SZ;
982 pg_off = ra % NF_PG_SZ;
983 for (i = 0; i < num_of_nand_chips; i++) {
984 start_nfc_addr_ops(FLASH_Block_Erase, pg_no, pg_off, 1, i, num_of_nand_chips);
986 writel(NAND_LAUNCH_AUTO_ERASE, NAND_LAUNCH_REG);
990 flash_status = NFC_STATUS_READ();
991 // check I/O bit 0 to see if it is 0 for success
992 if ((flash_status & ((0x1 << num_of_nand_chips) - 1)) != 0) {
996 NFC_CMD_INPUT(FLASH_Block_Erase);
997 start_nfc_addr_ops(FLASH_Block_Erase, ra / NF_PG_SZ, ra % NF_PG_SZ,
998 1, 0, num_of_nand_chips);
999 NFC_CMD_INPUT(FLASH_Start_Erase);
1001 flash_status = NFC_STATUS_READ();
1003 // check I/O bit 0 to see if it is 0 for success
1004 if ((flash_status & 0x1) != 0) {
1012 * Program a block of data in the flash. This function doesn't do
1013 * bad block checking. But if program fails, it return error.
1014 * Note: If "len" is less than a block it will program up to a page's
1015 * boundary. If not within a page boundary, then it fills the
1016 * rest of the page with 0xFF.
1018 * @param ra destination raw flash address
1019 * @param buf source address in the RAM
1020 * @param len len to be programmed
1022 * @return 0 if successful; -1 otherwise
1024 static int nfc_program_blk(u32 ra, u8 *buf, u32 len)
1026 u32 temp = num_of_nand_chips;
1028 /* Needed when romupdate is called */
1030 num_of_nand_chips = 1;
1032 for (; len >= NF_PG_SZ; len -= NF_PG_SZ) {
1033 if (nfc_write_pg_random(ra / NF_PG_SZ, ra % NF_PG_SZ, buf, 0) != 0) {
1040 memset(g_page_buf + len, 0xFF, NF_PG_SZ - len);
1041 memcpy(g_page_buf, buf, len);
1042 if (nfc_write_pg_random(ra / NF_PG_SZ, ra % NF_PG_SZ, g_page_buf, 0) != 0) {
1043 num_of_nand_chips = temp;
1047 num_of_nand_chips = temp;
1052 * Erase a range of NAND flash good blocks only.
1053 * It skips bad blocks and update the BBT once it sees new bad block due to erase.
1054 * @param addr raw NAND flash address. it has to be block size aligned
1055 * @param len number of bytes
1056 * @param skip_bad if 1, don't erase bad block; otherwise, always erase
1057 * @param verbose use true to print more messages
1059 * @return FLASH_ERR_OK (0) if successful; non-zero otherwise
1061 int nfc_erase_region(flash_addr_t addr, u32 len, bool skip_bad, bool verbose)
1063 u32 sz, blk, update = 0, j = 0;
1065 nfc_printf(NFC_DEBUG_MED, "%s: addr=0x%08llx len=0x%08x\n",
1066 __FUNCTION__, (u64)addr, len);
1068 if ((addr % NF_BLK_SZ) != 0) {
1069 diag_printf("Error: flash address 0x%08llx not block aligned\n", addr);
1070 return FLASH_ERR_INVALID;
1072 if ((len % NF_BLK_SZ) != 0 || len == 0) {
1073 diag_printf("Error: invalid length %u (must be > 0 and block aligned)\n", len);
1074 return FLASH_ERR_INVALID;
1076 addr = nfc_l_to_p(addr);
1077 // now addr has to be block aligned
1078 for (sz = 0; sz < len; addr += NF_BLK_SZ, j++, sz += NF_BLK_SZ) {
1079 blk = OFFSET_TO_BLOCK(addr);
1080 if (skip_bad && nfc_is_badblock(blk, g_bbt)) {
1081 diag_printf("\nSkipping bad block %u at addr 0x%08llx\n",
1085 if (nfc_erase_blk(addr) != 0) {
1086 diag_printf("\n** Error: Failed to erase block %u at addr 0x%08llx\n",
1088 mark_blk_bad(blk, g_bbt, BLK_BAD_RUNTIME);
1089 // we don't need to update the table immediately here since even
1090 // with power loss now, we should see the same erase error again.
1095 if ((j % 0x20) == 0)
1096 diag_printf("\n%s 0x%08llx: ", skip_bad ? "Erase" : "FORCE erase", (u64)addr);
1101 if (program_bbt_to_flash() != 0) {
1102 diag_printf("\nError: Failed to update bad block table\n");
1103 return FLASH_ERR_PROGRAM;
1105 diag_printf("\nnew bad blocks=%d\n", update);
1107 return FLASH_ERR_OK;
1111 * Program a range of NAND flash in blocks only.
1112 * It skips bad blocks and update the BBT once it sees new bad block due to program.
1113 * @param addr raw NAND flash address. it has to be block size aligned
1114 * @param len number of bytes
1115 * @return FLASH_ERR_OK (0) if successful; non-zero otherwise
1117 int nfc_program_region(flash_addr_t addr, u8 *buf, u32 len)
1119 u32 sz, blk, update = 0, partial_block_size;
1121 nfc_printf(NFC_DEBUG_MED, "%s: addr=0x%08llx, len=0x%08x\n",
1122 __FUNCTION__, (u64)addr, len);
1124 if ((addr % (NF_PG_SZ / num_of_nand_chips)) != 0) {
1125 diag_printf("Error: flash address 0x%08llx not page aligned\n", (u64)addr);
1126 return FLASH_ERR_INVALID;
1129 diag_printf("Error: invalid length\n");
1130 return FLASH_ERR_INVALID;
1133 partial_block_size = addr % NF_BLK_SZ;
1135 addr = nfc_l_to_p(addr);
1137 if (!flash_addr_valid(addr)) {
1138 diag_printf("\nToo many bad blocks in flash region 0x%08llx..0x%08llx\n",
1139 (u64)flash_region_start, (u64)flash_region_end);
1140 return FLASH_ERR_INVALID;
1142 blk = OFFSET_TO_BLOCK(addr);
1143 if (nfc_is_badblock(blk, g_bbt)) {
1144 diag_printf("\nSkipping bad block %u at addr 0x%08llx\n", blk, addr);
1148 sz = (len >= partial_block_size) ? partial_block_size : len;
1150 if (nfc_program_blk(addr, buf, sz) != 0) {
1152 diag_printf("\nError: Failed to program flash block %u at addr 0x%08llx\n",
1154 mark_blk_bad(blk, g_bbt, BLK_BAD_RUNTIME);
1155 // we don't need to update the table immediately here since even
1156 // with power loss now, we should see the same program error again.
1167 addr += partial_block_size;
1168 partial_block_size = NF_BLK_SZ;
1172 if (program_bbt_to_flash() != 0) {
1173 diag_printf("\nError: Failed to update bad block table\n");
1177 return FLASH_ERR_OK;
1181 * Read data from raw NAND flash address to memory. The MSB of the passed-
1182 * in flash address will be masked off inside the function.
1183 * It skips bad blocks and read good blocks of data for "len" bytes.
1185 * @param addr NAND flash address.
1186 * @param buf memory buf where data will be copied to
1187 * @param len number of bytes
1188 * @return FLASH_ERR_OK (0) if successful; non-zero otherwise
1190 int nfc_read_region(flash_addr_t addr, u8 *buf, u32 len)
1192 u32 start_point = 0, pg_no;
1193 unsigned int offset = addr % NF_PG_SZ;
1196 nfc_printf(NFC_DEBUG_MED, "%s: addr=0x%08llx, offset=%03x buf=0x%p, len=0x%08x\n",
1197 __FUNCTION__, addr, offset, buf, len);
1199 addr = nfc_l_to_p(addr);
1200 if (addr < (u32)flash_info.start || (addr + len) > (u32)flash_info.end || len == 0) {
1201 diag_printf("** Error: flash address 0x%08llx..0x%08llx outside valid range %p..%p\n",
1202 (u64)addr, (u64)addr + len - 1, flash_info.start, flash_info.end);
1203 return FLASH_ERR_INVALID;
1209 if (!flash_addr_valid(addr)) {
1210 diag_printf("Too many bad blocks in flash region 0x%08llx..0x%08llx\n",
1211 (u64)flash_region_start, (u64)flash_region_end);
1212 return FLASH_ERR_INVALID;
1215 int blk = OFFSET_TO_BLOCK(addr);
1217 if (nfc_is_badblock(blk, g_bbt)) {
1218 diag_printf("Skipping bad block %u at addr 0x%08llx\n", blk, (u64)addr);
1226 pg_no = addr / NF_PG_SZ;
1228 /* Find which interleaved NAND device */
1229 start_point = offset / (NF_PG_SZ / num_of_nand_chips);
1233 for (i = start_point; i < num_of_nand_chips; i++) {
1234 int chunk_size = (NF_PG_SZ - offset) / num_of_nand_chips;
1236 if (chunk_size > len)
1238 nfc_printf(NFC_DEBUG_MED, "Reading page %d addr 0x%08llx chip %d len 0x%03x\n",
1239 pg_no, (u64)addr, i, chunk_size);
1240 if (nfc_read_page(i, pg_no, 0) != 0) {
1241 diag_printf("** Error: Failed to read flash block %u at addr 0x%08llx\n",
1242 OFFSET_TO_BLOCK(addr), (u64)addr);
1243 return FLASH_ERR_INVALID;
1245 // now do the copying
1246 nfc_buf_read(buf, NAND_MAIN_BUF0 + offset, chunk_size);
1250 addr += NF_PG_SZ / num_of_nand_chips - offset;
1253 chk_bad = (addr % NF_BLK_SZ) == 0;
1256 return FLASH_ERR_OK;
1260 * Support only either program for main area only. Or spare-area only for 512B.
1261 * If one wants to write to the spare-area, then before calling this function,
1262 * the spare area NFC RAM buffer has to be setup already. This function doesn't touch
1263 * the spare area NFC RAM buffer.
1265 * @param pg_no page number offset from 0
1266 * @param pg_off byte offset within the page
1267 * @param buf data buffer in the RAM to be written to NAND flash
1268 * @param ecc_force can force ecc to be off. Otherwise, by default it is on
1269 * unless the page offset is non-zero
1271 * @return 0 if successful; non-zero otherwise
1273 // SP-only opearation is not supported anymore !!!
1274 static int nfc_write_pg_random(u32 pg_no, u32 pg_off, u8 *buf, u32 ecc_force)
1277 u32 ecc = NFC_FLASH_CONFIG2_ECC_EN, v, i;
1278 u32 write_count = NF_PG_SZ, start_point = 0, rba, rba_count = 0;
1280 // the 2nd condition is to test for unaligned page address -- ecc has to be off.
1281 if (ecc_force == ECC_FORCE_OFF || pg_off != 0) {
1285 diag_printf1("%s(0x%x, 0x%x, %d)\n", __FUNCTION__, pg_no, pg_off, ecc_force);
1287 switch (g_nfc_version & 0xf0) {
1289 /* Check if Page size is greater than NFC buffer */
1291 if (write_count <= NFC_BUFSIZE) {
1292 // No need to worry about the spare area
1293 nfc_buf_write(NAND_MAIN_BUF0, buf, write_count);
1296 // No need to worry about the spare area
1297 nfc_buf_write(NAND_MAIN_BUF0, buf, NFC_BUFSIZE);
1298 write_count -= NFC_BUFSIZE;
1301 // combine the two commands for program
1302 writel((FLASH_Program << 8) | FLASH_Send_Data, NAND_CMD_REG);
1304 for (i = start_point; i < num_of_nand_chips; i++) {
1305 rba = rba_count * ((NF_PG_SZ / num_of_nand_chips) / 512);
1306 /* Completely wrote out the NFC buffer, break and copy more to the NFC buffer */
1313 v = readl(NFC_FLASH_CONFIG2_REG) & ~NFC_FLASH_CONFIG2_ECC_EN;
1314 // setup config2 register for ECC enable or not
1315 write_nfc_ip_reg(v | ecc, NFC_FLASH_CONFIG2_REG);
1317 start_nfc_addr_ops(FLASH_Program, pg_no, pg_off, 0, i, num_of_nand_chips);
1319 // start auto-program
1320 writel(NAND_LAUNCH_AUTO_PROG, NAND_LAUNCH_REG);
1321 if (i < (num_of_nand_chips - i))
1322 wait_for_auto_prog_done();
1329 } while (write_count > 0);
1330 flash_status = NFC_STATUS_READ();
1331 // check I/O bit 0 to see if it is 0 for success
1332 if ((flash_status & ((0x1 << num_of_nand_chips) - 1)) != 0) {
1337 if (g_nfc_version != MXC_NFC_V1) {
1340 for (i = 1; i < NFC_SPARE_BUF_SZ / 16; i++) {
1341 memcpy((void *)(NAND_SPAR_BUF0 + i * NFC_SPARE_BUF_SZ),
1342 (void *)(NAND_SPAR_BUF0 + i * 16), 16);
1345 nfc_buf_write(NAND_MAIN_BUF0, buf, NF_PG_SZ);
1346 #ifdef BARKER_CODE_SWAP_LOC
1347 // To replace the data at offset MXC_NAND_BOOT_LOAD_BARKER with
1348 // the address of the NFC base. This is needed for certain platforms.
1350 diag_printf("\n[INFO]: copy data at 0x%x to spare area and set it to 0x%x\n",
1351 BARKER_CODE_SWAP_LOC, BARKER_CODE_VAL);
1352 writel(readl(NFC_BASE + BARKER_CODE_SWAP_LOC), NAND_SPAR_BUF0);
1353 // todo: set BARKER_CODE_VAL and BARKER_CODE_SWAP_LOC for skye, etc.
1354 writel(BARKER_CODE_VAL, NFC_BASE + BARKER_CODE_SWAP_LOC);
1357 NFC_CMD_INPUT(FLASH_Send_Data);
1358 start_nfc_addr_ops(FLASH_Program, pg_no, pg_off, 0, 0, num_of_nand_chips);
1360 NFC_DATA_INPUT(RAM_BUF_0, NFC_MAIN_ONLY, ecc);
1361 if (g_is_4k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1362 diag_printf("4K page with multi cycle write is not supported\n");
1365 if (g_is_2k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1366 NFC_DATA_INPUT_2k(RAM_BUF_1);
1367 NFC_DATA_INPUT_2k(RAM_BUF_2);
1368 NFC_DATA_INPUT_2k(RAM_BUF_3);
1370 NFC_CMD_INPUT(FLASH_Program);
1372 flash_status = NFC_STATUS_READ();
1373 // check I/O bit 0 to see if it is 0 for success
1374 if ((flash_status & 0x1) != 0) {
1375 diag_printf("** Error: failed to program page %u at 0x%08x status=0x%02x\n",
1376 pg_no, pg_no * NF_PG_SZ + pg_off, flash_status);
1384 // for version V1 and V2 of NFC
1385 static int nfc_read_pg_random(u32 pg_no, u32 pg_off, u32 ecc_force, u32 cs_line,
1386 u32 num_of_nand_chips)
1389 u8 t2 = 0, t3 = 0, t4 = 0, t5 = 0, t6 = 0, t7 = 0, t8 = 0;
1392 nfc_printf(NFC_DEBUG_MAX, "%s: reading page %u offset 0x%03x (addr 0x%08llx)\n",
1393 __FUNCTION__, pg_no, pg_off, (flash_addr_t)pg_no * NF_PG_SZ + pg_off);
1395 if (ecc_force == ECC_FORCE_OFF || pg_off != 0 )
1398 NFC_CMD_INPUT(FLASH_Read_Mode1);
1399 start_nfc_addr_ops(FLASH_Read_Mode1, pg_no, pg_off, 0, 0, num_of_nand_chips);
1401 if (g_is_2k_page || g_is_4k_page) {
1402 NFC_CMD_INPUT(FLASH_Read_Mode1_LG);
1405 NFC_DATA_OUTPUT(RAM_BUF_0, FDO_PAGE_SPARE, ecc);
1406 switch (g_nfc_version & 0xf0) {
1408 t1 = readw(ECC_STATUS_RESULT_REG);
1409 if (g_is_2k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1410 NFC_DATA_OUTPUT(RAM_BUF_1, FDO_PAGE_SPARE, ecc);
1411 t2 = readw(ECC_STATUS_RESULT_REG);
1412 NFC_DATA_OUTPUT(RAM_BUF_2, FDO_PAGE_SPARE, ecc);
1413 t3 = readw(ECC_STATUS_RESULT_REG);
1414 NFC_DATA_OUTPUT(RAM_BUF_3, FDO_PAGE_SPARE, ecc);
1415 t4 = readw(ECC_STATUS_RESULT_REG);
1418 if (ecc && ((t1 & 0xA) != 0x0 || (t2 & 0xA) != 0x0 ||
1419 (t3 & 0xA) != 0x0 || (t4 & 0xA) != 0x0)) {
1420 diag_printf("\n** Error: ECC error page %u, col %u: ECC status=0x%x:0x%x:0x%x:0x%x\n",
1421 pg_no, pg_off, t1, t2, t3, t4);
1427 if (g_is_2k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1428 NFC_DATA_OUTPUT(RAM_BUF_1, FDO_PAGE_SPARE, ecc);
1429 NFC_DATA_OUTPUT(RAM_BUF_2, FDO_PAGE_SPARE, ecc);
1430 NFC_DATA_OUTPUT(RAM_BUF_3, FDO_PAGE_SPARE, ecc);
1433 t1 = readl(ECC_STATUS_RESULT_REG);
1434 if (g_is_2k_page || g_is_4k_page) {
1435 t2 = (t1 >> 4) & 0xF;
1436 t3 = (t1 >> 8) & 0xF;
1437 t4 = (t1 >> 12) & 0xF;
1439 t5 = (t1 >> 16) & 0xF;
1440 t6 = (t1 >> 20) & 0xF;
1441 t7 = (t1 >> 24) & 0xF;
1442 t8 = (t1 >> 28) & 0xF;
1445 if ((t1 = (t1 & 0xF)) > 4 || t2 > 4 || t3 > 4 || t4 > 4 ||
1446 t5 > 4 || t6 > 4 || t7 > 4 || t8 > 4) {
1447 diag_printf("\n** Error: ECC error reading block %u page %u\n",
1448 pg_no / NF_PG_PER_BLK, pg_no % NF_PG_PER_BLK);
1449 diag_printf(" ECC status=%x:%x:%x:%x:%x:%x:%x:%x\n",
1450 t1, t2, t3, t4, t5, t6, t7, t8);
1457 diag_printf("Unknown NFC version: %d\n", g_nfc_version);
1460 if (g_nfc_version != MXC_NFC_V1) {
1463 for (i = 1; i < NFC_SPARE_BUF_SZ / 16; i++) {
1464 memcpy((void *)(NAND_SPAR_BUF0 + i * 16),
1465 (void *)(NAND_SPAR_BUF0 + i * NFC_SPARE_BUF_SZ), 16);
1468 #ifdef BARKER_CODE_SWAP_LOC
1469 // To replace the data at offset BARKER_CODE_SWAP_LOC with the address of the NFC base
1470 // This is needed for certain platforms
1472 diag_printf("\n[INFO]: copy back data from spare to 0x%x\n", BARKER_CODE_SWAP_LOC);
1473 writel(readl(NAND_SPAR_BUF0), NFC_BASE + BARKER_CODE_SWAP_LOC);
1480 #endif // ifndef NFC_V3_0
1483 * Read a page's both main and spare area from NAND flash to the internal RAM buffer.
1484 * It always reads data to the internal buffer 0.
1486 * @param cs_line which NAND device is used
1487 * @param pg_no page number of the device
1488 * @param pg_off offset within a page
1490 * @return 0 if no error or 1-bit error; -1 otherwise
1492 static int nfc_read_page(u32 cs_line, u32 pg_no, u32 pg_off)
1494 return nfc_read_pg_random(pg_no, pg_off, ECC_FORCE_ON, cs_line, num_of_nand_chips);
1497 static int nfc_write_page(u32 pg_no, u32 pg_off, u32 ecc_force)
1500 u32 ecc = NFC_FLASH_CONFIG2_ECC_EN;
1502 diag_printf1("Writing page %u addr 0x%08llx\n",
1503 pg_no, (u64)pg_no * NF_PG_SZ + pg_off);
1504 if (ecc_force == ECC_FORCE_OFF || pg_off != 0) {
1508 if (g_nfc_version == MXC_NFC_V3) {
1511 u32 start_point = 0, rba, rba_count = 0;
1513 // combine the two commands for program
1514 writel((FLASH_Program << 8) | FLASH_Send_Data, NAND_CMD_REG);
1516 for (i = start_point; i < num_of_nand_chips; i++) {
1517 rba = rba_count * ((NF_PG_SZ / num_of_nand_chips) / 512);
1518 /* Completely wrote out the NFC buffer, break and copy more to the NFC buffer */
1525 v = readl(NFC_FLASH_CONFIG2_REG) & ~NFC_FLASH_CONFIG2_ECC_EN;
1526 // setup config2 register for ECC enable or not
1527 write_nfc_ip_reg(v | ecc, NFC_FLASH_CONFIG2_REG);
1529 start_nfc_addr_ops(FLASH_Program, pg_no, pg_off, 0, i, num_of_nand_chips);
1531 // start auto-program
1532 writel(NAND_LAUNCH_AUTO_PROG, NAND_LAUNCH_REG);
1533 if (i < (num_of_nand_chips - i))
1534 wait_for_auto_prog_done();
1541 flash_status = NFC_STATUS_READ();
1543 if (g_nfc_version != MXC_NFC_V1) {
1546 for (i = NFC_SPARE_BUF_SZ / 16 - 1; i >= 0; i--) {
1547 memcpy((void *)(NAND_SPAR_BUF0 + i * NFC_SPARE_BUF_SZ),
1548 (void *)(NAND_SPAR_BUF0 + i * 16), 16);
1551 NFC_CMD_INPUT(FLASH_Send_Data);
1552 start_nfc_addr_ops(FLASH_Program, pg_no, pg_off, 0, 0, num_of_nand_chips);
1554 NFC_DATA_INPUT(RAM_BUF_0, NFC_MAIN_ONLY, ecc);
1555 if (g_is_4k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1556 diag_printf("4K page with multi cycle write is not supported\n");
1559 if (g_is_2k_page && PG_2K_DATA_OP_MULTI_CYCLES()) {
1560 NFC_DATA_INPUT_2k(RAM_BUF_1);
1561 NFC_DATA_INPUT_2k(RAM_BUF_2);
1562 NFC_DATA_INPUT_2k(RAM_BUF_3);
1564 NFC_CMD_INPUT(FLASH_Program);
1566 flash_status = NFC_STATUS_READ();
1568 if ((flash_status & 0x1) != 0) {
1569 diag_printf("** Error: failed to program page %u at addr 0x%08llx\n",
1570 pg_no, (u64)pg_no * NF_PG_SZ + pg_off);
1576 // Read data into buffer
1577 #ifndef MXCFLASH_SELECT_MULTI
1578 int flash_read_buf(void *addr, void *data, int len)
1580 int nandflash_read_buf(void *addr, void *data, int len)
1583 flash_addr_t flash_addr = (unsigned long)addr;
1584 return nfc_read_region(flash_addr, data, len);
1587 void mxc_nfc_print_info(void)
1589 diag_printf("[0x%08x bytes]: %u blocks of %u pages of %u bytes each.\n",
1590 NF_DEV_SZ, NF_BLK_CNT,
1591 NF_PG_PER_BLK, NF_PG_SZ);
1594 static int mxc_nfc_isbad_bbt(u16 *bbt, int block)
1599 res = (get_byte(bbt, block >> 3) >> (block & 0x06)) & 0x03;
1604 static int mxc_nfc_search_bbt(struct nand_bbt_descr *td)
1609 for (i = 0; i < NF_BBT_MAX_NR; i++) {
1610 u32 blk = NF_BLK_CNT - i - 1;
1611 flash_addr_t addr = blk * NF_BLK_SZ;
1613 if (nfc_read_pg_random(addr / NF_PG_SZ, addr % NF_PG_SZ,
1614 ECC_FORCE_ON, 0, num_of_nand_chips) != 0) {
1615 diag_printf("Failed to read bbt page %u at 0x%08llx\n",
1616 (u32)(addr / NF_PG_SZ), addr);
1619 if (check_short_pattern((void *)NAND_SPAR_BUF0, td) == 0) {
1620 diag_printf1("found BBT at block %u addr %08llx\n", blk, (u64)addr);
1621 td->pages = blk * NF_PG_PER_BLK;
1622 td->version = get_byte((void *)NAND_SPAR_BUF0, td->veroffs);
1623 mark_blk_bad(blk, g_bbt, BLK_RESERVED);
1624 diag_printf1("Found version %d BBT at block %d (0x%08llx)\n",
1625 td->version, td->pages / NF_PG_PER_BLK,
1626 (u64)td->pages * NF_PG_SZ);
1634 * Look for the BBT depending on the passed-in lowlevel value.
1635 * @param lowlevel If true, then it does a low level scan based on factory
1636 * marked BI(block info) field with ECC off to decide if a
1638 * If false, then it checks to see if an existing BBT in the
1639 * flash or not. If not, then it returns -1. If yes, it will
1640 * prints out the number of bad blocks.
1642 * @return number of bad blocks for the whole nand flash
1644 * Note: For a brand new flash, this function has to be called with
1649 static int mxc_nfc_scan(bool lowlevel)
1652 u32 count1 = 0, count2 = 0;
1654 struct nand_bbt_descr *td = g_mxc_nfc_bbt_main_descr;
1655 struct nand_bbt_descr *md = g_mxc_nfc_bbt_mirror_descr;
1657 nfc_printf(NFC_DEBUG_MAX, "%s()\n", __FUNCTION__);
1658 mxc_nfc_scan_done = 0;
1660 if (g_nfc_debug_measure) {
1661 count1 = hal_timer_count();
1663 // read out the last 4 blocks for marker
1664 // need to keep where is the td and md block number
1666 struct nand_bbt_descr *bd;
1668 diag_printf1("Searching for BBT in the flash ...\n");
1669 if (mxc_nfc_search_bbt(td) != 0) {
1670 diag_printf("No main BBT found in flash\n");
1672 if (md && mxc_nfc_search_bbt(md) != 0) {
1673 diag_printf("No mirror BBT found in flash\n");
1675 if (td->pages == -1 && (!md || md->pages == -1)) {
1676 diag_printf("No BBT found. Need to do \"nand scan\" first\n");
1679 if (td->pages >= 0 && (md == NULL || md->version <= td->version)) {
1681 nfc_printf(NFC_DEBUG_MIN, "Using normal bbt at page %d\n", bd->pages);
1682 } else if (md != NULL && md->pages >= 0) {
1684 nfc_printf(NFC_DEBUG_MIN, "Using mirror bbt at page %d\n", bd->pages);
1686 diag_printf("** Error: Failed to read bbt from flash\n");
1689 nfc_read_page(0, bd->pages, 0);
1690 for (i = 0; i < NF_BLK_CNT; i++) {
1691 int res = mxc_nfc_isbad_bbt((u16 *)NAND_MAIN_BUF0, i);
1693 // construct the bad block table
1694 mark_blk_bad(i, g_bbt, res);
1700 diag_printf("Doing low level scan to construct BBT\n");
1701 for (i = 0; i < NF_BLK_CNT; i++) {
1702 int res = nfc_is_badblock(i, buf);
1704 // construct the bad block table
1706 mark_blk_bad(i, g_bbt, res);
1711 diag_printf1("Total bad blocks: %d\n", bad);
1712 if (g_nfc_debug_measure) {
1713 count2 = hal_timer_count();
1714 diag_printf("counter1=0x%x, counter2=0x%x, diff=0x%x (%u usec)\n",
1715 count1, count2, count2 - count1,
1716 (count2 - count1) * 1000000 / 32768);
1718 mxc_nfc_scan_done = 1;
1722 ////////////////////////// "nand" commands support /////////////////////////
1723 // Image management functions
1724 local_cmd_entry("info",
1725 "Show nand flash info (number of good/bad blocks)",
1731 local_cmd_entry("show",
1732 "Show a page main/spare areas or spare area only (-s)",
1733 "-f <raw page address> [-s]",
1738 local_cmd_entry("read",
1739 "Read data from nand flash into RAM",
1740 "-f <raw addr> -b <mem_load_addr> -l <byte len> [-c <col>]\n"
1741 " Note -c is only for 2K-page for value <0, 2048+64-1>",
1746 local_cmd_entry("write",
1747 "Write data from RAM into nand flash",
1748 "-f <raw address> -b <memory_address> -l <image_length> [-c <col_addr>]",
1753 local_cmd_entry("erase",
1754 "Erase nand flash contents",
1755 "-f <raw address> -l <length> [-o]\n"
1756 " -o: force erase (even for bad blocks)",
1761 local_cmd_entry("scan",
1762 "Scan bad blocks and may also save bad block table into the NAND flash.",
1764 "No argument: save existing bad block table (BBT)\n"
1765 " -r: re-scan with ECC off and save BBT -- for brand NEW flash\n"
1766 " -o: force erase all, reconstruct BBT (no ECC) and save BBT -- for development.",
1771 local_cmd_entry("debug",
1772 "Various NAND debug features ",
1773 "<0> no debug messages <default>\n"
1774 " <1> min debug messages\n"
1775 " <2> med debug messages\n"
1776 " <3> max debug messages\n"
1777 " <4> enable(default)/disable h/w ECC for both r/w\n"
1778 " <5> disable(default)/enalbe spare-only read\n"
1779 " <9> enable/disable measurement\n"
1780 " no parameter - display current debug setup",
1785 local_cmd_entry("bad",
1786 "Mark bad block in BBT",
1787 "[-f <raw address>] [-b <block number>] [-c]\n"
1788 " -c: clear bad block mark\n"
1789 " -f and -b are mutually exclusive",
1794 // Define table boundaries
1795 CYG_HAL_TABLE_BEGIN( __NAND_cmds_TAB__, NAND_cmds);
1796 CYG_HAL_TABLE_END( __NAND_cmds_TAB_END__, NAND_cmds);
1798 extern struct cmd __NAND_cmds_TAB__[], __NAND_cmds_TAB_END__;
1801 static cmd_fun do_nand_cmds;
1802 RedBoot_nested_cmd("nand",
1803 "Utility function to NAND flash using raw address",
1806 __NAND_cmds_TAB__, &__NAND_cmds_TAB_END__
1809 static void nand_usage(char *why)
1811 diag_printf("*** invalid 'nand' command: %s\n", why);
1812 cmd_usage(__NAND_cmds_TAB__, &__NAND_cmds_TAB_END__, "nand ");
1815 static u32 curr_addr;
1816 static void nand_show(int argc, char *argv[])
1819 bool flash_addr_set = false;
1820 bool spar_only = false;
1821 struct option_info opts[2];
1823 init_opts(&opts[0], 'f', true, OPTION_ARG_TYPE_NUM,
1824 &ra, &flash_addr_set, "NAND FLASH memory byte address");
1825 init_opts(&opts[1], 's', false, OPTION_ARG_TYPE_FLG,
1826 &spar_only, NULL, "Spare only");
1828 if (!scan_opts(argc, argv, 2, opts, 2, 0, 0, 0)) {
1831 if (!flash_addr_set) {
1833 curr_addr += NF_PG_SZ;
1838 if (ra % NF_PG_SZ) {
1839 diag_printf("** Error: flash address must be page aligned\n");
1843 ra &= MXC_NAND_ADDR_MASK;
1844 if (nfc_is_badblock(OFFSET_TO_BLOCK(ra), g_bbt)) {
1845 diag_printf("This is a bad block\n");
1848 print_page(ra, spar_only);
1852 * For low level nand read command. It doesn't check for bad block or not
1854 static void nand_read(int argc, char *argv[])
1857 u32 mem_addr, ra, col, i, pg_no, pg_off;
1858 bool mem_addr_set = false;
1859 bool flash_addr_set = false;
1860 bool length_set = false;
1861 bool col_set = false;
1862 struct option_info opts[4];
1864 bool ecc_status = g_ecc_enable;
1866 init_opts(&opts[0], 'b', true, OPTION_ARG_TYPE_NUM,
1867 &mem_addr, &mem_addr_set, "memory base address");
1868 init_opts(&opts[1], 'f', true, OPTION_ARG_TYPE_NUM,
1869 &ra, &flash_addr_set, "FLASH memory base address");
1870 init_opts(&opts[2], 'l', true, OPTION_ARG_TYPE_NUM,
1871 &len, &length_set, "image length [in FLASH]");
1872 init_opts(&opts[3], 'c', true, OPTION_ARG_TYPE_NUM,
1873 &col, &col_set, "column addr");
1875 if (!scan_opts(argc, argv, 2, opts, 4, 0, 0, 0)) {
1876 nand_usage("invalid arguments");
1880 if (ra % NF_PG_SZ) {
1881 diag_printf("** Error: flash address must be page aligned\n");
1885 if (!mem_addr_set || !flash_addr_set || !length_set) {
1886 nand_usage("** Error: required parameter missing");
1889 if ((mem_addr < (CYG_ADDRESS)ram_start) ||
1890 ((mem_addr+len) >= (CYG_ADDRESS)ram_end)) {
1891 diag_printf("** WARNING: RAM address: 0x%08x may be invalid\n", mem_addr);
1892 diag_printf(" valid range is 0x%p-0x%p\n", ram_start, ram_end);
1896 diag_printf("Random read at page %u, column 0x%04x\n",
1897 ra / NF_PG_SZ, col);
1899 if (g_is_2k_page || g_is_4k_page) {
1900 g_ecc_enable = false;
1902 nfc_read_pg_random(ra / NF_PG_SZ, col, ECC_FORCE_OFF, 0, num_of_nand_chips);
1903 if (g_is_2k_page || g_is_4k_page) {
1904 g_ecc_enable = ecc_status;
1906 nfc_buf_read((void *)mem_addr, NAND_MAIN_BUF0, NF_PG_SZ);
1910 // ensure integer multiple of page size
1911 len = (len + NF_PG_SZ - 1) & ~(NF_PG_SZ - 1);
1912 ra &= MXC_NAND_ADDR_MASK;
1914 if (OFFSET_TO_BLOCK(ra) > (NF_BLK_CNT - 1)) {
1915 diag_printf("\n** Error: flash address: 0x%08x out of range\n", ra);
1918 pg_no = ra / NF_PG_SZ;
1919 pg_off = ra % NF_PG_SZ;
1920 for (i = 0; i < num_of_nand_chips; i++) {
1921 if (nfc_read_page(i, pg_no, pg_off) != 0) {
1922 diag_printf("\n** Error: uncorrectable ECC at addr 0x%08x\n", ra);
1923 diag_printf("use 'nand bad -b %u' to mark this block in BBT\n",
1924 pg_no / NF_PG_PER_BLK);
1926 if ((j++ % 0x20) == 0)
1927 diag_printf("\n%s 0x%08x: ", __FUNCTION__, ra);
1930 nfc_buf_read((void *)mem_addr, NAND_MAIN_BUF0, NF_PG_SZ / num_of_nand_chips);
1932 ra += NF_PG_SZ / num_of_nand_chips;
1933 mem_addr += NF_PG_SZ / num_of_nand_chips;
1934 len -= NF_PG_SZ / num_of_nand_chips;
1941 static void nand_write(int argc, char *argv[])
1943 int len, len_st, j = 0;
1944 u32 mem_addr, mem_addr_st, ra, col;
1945 bool mem_addr_set = false;
1946 bool flash_addr_set = false;
1947 bool length_set = false;
1948 bool col_set = false;
1949 struct option_info opts[4];
1950 bool ecc_status = g_ecc_enable;
1952 init_opts(&opts[0], 'b', true, OPTION_ARG_TYPE_NUM,
1953 &mem_addr, &mem_addr_set, "memory base address");
1954 init_opts(&opts[1], 'f', true, OPTION_ARG_TYPE_NUM,
1955 &ra, &flash_addr_set, "FLASH memory base address");
1956 init_opts(&opts[2], 'l', true, OPTION_ARG_TYPE_NUM,
1957 &len, &length_set, "image length [in FLASH]");
1958 init_opts(&opts[3], 'c', true, OPTION_ARG_TYPE_NUM,
1959 &col, &col_set, "column addr");
1960 if (!scan_opts(argc, argv, 2, opts, 4, 0, 0, 0)) {
1961 nand_usage("invalid arguments");
1965 if (!mem_addr_set || !flash_addr_set || !length_set) {
1966 nand_usage("required parameter missing");
1970 if ((mem_addr < (CYG_ADDRESS)ram_start) ||
1971 ((mem_addr+len) >= (CYG_ADDRESS)ram_end)) {
1972 diag_printf("** WARNING: RAM address: %p may be invalid\n", (void *)mem_addr);
1973 diag_printf(" valid range is %p-%p\n", (void *)ram_start, (void *)ram_end);
1977 diag_printf("Random write at page %u, column %u\n", ra / NF_PG_SZ, col);
1979 if (g_is_2k_page || g_is_4k_page) {
1980 g_ecc_enable = false;
1982 nfc_write_pg_random(ra / NF_PG_SZ, col, (u8 *)mem_addr, 0);
1983 if (g_is_2k_page || g_is_4k_page) {
1984 g_ecc_enable = ecc_status;
1989 if ((ra % NF_PG_SZ) != 0) {
1990 diag_printf("** Error: flash address must be page aligned\n");
1994 mem_addr_st = mem_addr;
1996 ra &= MXC_NAND_ADDR_MASK;
1998 if (OFFSET_TO_BLOCK(ra) > (NF_BLK_CNT - 1)) {
1999 diag_printf("\nOut of range: addr=0x%08x\n", ra);
2002 if (nfc_is_badblock(OFFSET_TO_BLOCK(ra), g_bbt)) {
2003 diag_printf("\nSkipping bad block %u at addr=0x%08llx\n",
2004 OFFSET_TO_BLOCK(ra), (u64)ra);
2005 ra = (OFFSET_TO_BLOCK(ra) + 1) * NF_BLK_SZ;
2009 if ((ra % NF_BLK_SZ) == 0) {
2010 mem_addr_st = mem_addr;
2013 if (nfc_write_pg_random(ra / NF_PG_SZ, ra % NF_PG_SZ, (u8 *)mem_addr, 0) != 0) {
2014 if (g_nfc_debug_level >= NFC_DEBUG_DEF) {
2015 diag_printf("\nWarning %d: program error at addr 0x%x\n", __LINE__, ra);
2017 mark_blk_bad(OFFSET_TO_BLOCK(ra), g_bbt, BLK_BAD_RUNTIME);
2018 ra = (OFFSET_TO_BLOCK(ra) + 1) * NF_BLK_SZ; //make sure block size aligned
2019 mem_addr = mem_addr_st; // rewind to blocl boundary
2023 if ((j++ % 0x20) == 0)
2024 diag_printf("\nProgramming 0x%08x: ", ra);
2029 mem_addr += NF_PG_SZ;
2034 void nand_debug_fun(int argc, char *argv[])
2037 const char *dbg_lvl_str;
2040 opt = argv[2][0] - '0';
2043 g_nfc_debug_level = NFC_DEBUG_NONE;
2046 g_nfc_debug_level = NFC_DEBUG_MIN;
2049 g_nfc_debug_level = NFC_DEBUG_MED;
2052 g_nfc_debug_level = NFC_DEBUG_MAX;
2055 g_ecc_enable = g_ecc_enable? false: true;
2058 // toggle g_spare_only_read_ok
2059 g_spare_only_read_ok = g_spare_only_read_ok? false: true;
2062 g_nfc_debug_measure = g_nfc_debug_measure? false: true;
2066 diag_printf("%s(%s) not supported\n", __FUNCTION__, argv[2]);
2069 switch (g_nfc_debug_level) {
2070 case NFC_DEBUG_NONE:
2071 dbg_lvl_str = "none";
2074 dbg_lvl_str = "min";
2077 dbg_lvl_str = "med";
2080 dbg_lvl_str = "max";
2083 dbg_lvl_str = "invalid";
2085 diag_printf("Current debug options are:\n");
2086 diag_printf(" h/w ECC: %s\n", g_ecc_enable ? "on" : "off");
2087 diag_printf(" sp-only read: %s\n", g_spare_only_read_ok ? "on" : "off");
2088 diag_printf(" measurement: %s\n", g_nfc_debug_measure ? "on" : "off");
2089 diag_printf(" message level: %s\n", dbg_lvl_str);
2092 static void nand_erase(int argc, char *argv[])
2095 bool faddr_set = false;
2096 bool force_erase_set = false;
2097 bool length_set = false;
2098 struct option_info opts[4];
2100 init_opts(&opts[0], 'f', true, OPTION_ARG_TYPE_NUM,
2101 &ra, &faddr_set, "FLASH memory base address");
2102 init_opts(&opts[1], 'l', true, OPTION_ARG_TYPE_NUM,
2103 &len, &length_set, "length in bytes");
2104 init_opts(&opts[2], 'o', false, OPTION_ARG_TYPE_FLG,
2105 &force_erase_set, &force_erase_set, "force erases block");
2107 if (!scan_opts(argc, argv, 2, opts, 4, 0, 0, 0)) {
2108 nand_usage("invalid arguments");
2112 if (!faddr_set || !length_set) {
2113 nand_usage("missing argument");
2116 if ((ra % NF_BLK_SZ) != 0 ||
2117 (len % NF_BLK_SZ) != 0 || len == 0) {
2118 diag_printf("Address or length is not block aligned or length is zero!\n");
2119 diag_printf("Block size is 0x%x\n", NF_BLK_SZ);
2123 if (!verify_action("About to erase 0x%x bytes from nand offset 0x%x\n", len, ra)) {
2124 diag_printf("** Aborted\n");
2128 // now ra is block aligned
2129 if (force_erase_set == true) {
2130 diag_printf("Force erase ...");
2131 nfc_erase_region(ra, len, 0, 1);
2134 nfc_erase_region(ra, len, 1, 1);
2139 extern void romupdate(int argc, char *argv[]);
2140 static void nand_scan(int argc, char *argv[])
2142 bool force_erase = false;
2143 bool force_rescan = false;
2144 struct option_info opts[2];
2146 init_opts(&opts[0], 'o', false, OPTION_ARG_TYPE_FLG,
2147 &force_erase, NULL, "force erases block first");
2149 init_opts(&opts[1], 'r', false, OPTION_ARG_TYPE_FLG,
2150 &force_rescan, NULL, "force low level re-scan");
2152 if (!scan_opts(argc, argv, 2, opts, 2, 0, 0, 0)) {
2153 nand_usage("invalid arguments");
2157 if (!force_erase && !force_rescan && !mxc_nfc_scan_done) {
2158 diag_printf("Need to build BBT first with \"nand scan [-o|-r]\"\n");
2164 diag_printf("Force erase first ...\n");
2166 // do force erase, skipping bad blocks. After this call, g_bbt should be re-built
2167 // for the whole NAND flash.
2168 if (nfc_erase_region(0, NF_DEV_SZ, true, false) != 0) {
2173 mxc_nfc_scan_done = 0;
2177 diag_printf("Force re-scan ...\n");
2178 memset(g_bbt, 0, g_bbt_sz);
2181 // program g_bbt into the flash
2182 diag_printf("Writing BBT to flash\n");
2183 if (program_bbt_to_flash() != 0) {
2184 diag_printf("Error: Failed to write BBT to flash\n");
2191 static void nand_info(int argc, char *argv[])
2195 if (nand_flash_index == -1) {
2196 diag_printf("Can't find valid NAND flash: %d\n", __LINE__);
2200 diag_printf("\nType:\t\t %s\n", NF_VEND_INFO);
2201 diag_printf("Total size:\t 0x%08x bytes (%d MiB)\n", NF_DEV_SZ, NF_DEV_SZ / SZ_1M);
2202 diag_printf("Total blocks:\t 0x%x (%d)\n", NF_BLK_CNT, NF_BLK_CNT);
2203 diag_printf("Block size:\t 0x%x (%d)\n", NF_BLK_SZ, NF_BLK_SZ);
2204 diag_printf("Page size:\t 0x%x (%d)\n", NF_PG_SZ, NF_PG_SZ);
2205 diag_printf("Spare size:\t 0x%x (%d)\n", NF_SPARE_SZ, NF_SPARE_SZ);
2206 diag_printf("Pages per block: 0x%x (%d)\n", NF_PG_PER_BLK, NF_PG_PER_BLK);
2208 if (mxc_nfc_scan(false) == -1) {
2212 for (i = 0; i < NF_BLK_CNT; i++) {
2213 int res = nfc_is_badblock(i, g_bbt);
2214 if (res & ~BLK_RESERVED) {
2215 diag_printf("block %d at offset 0x%08x is a %s bad block\n",
2216 i, i * NF_BLK_SZ, res == BLK_BAD_FACTORY ? "factory" : "runtime");
2220 diag_printf("==================================\n");
2221 diag_printf("Found %d bad block(s) out of %d\n", j, i);
2224 static void nand_bad(int argc, char *argv[])
2228 bool ra_set = false;
2229 bool block_set = false;
2231 struct option_info opts[3];
2234 init_opts(&opts[0], 'f', true, OPTION_ARG_TYPE_NUM,
2235 &ra, &ra_set, "FLASH memory base address");
2236 init_opts(&opts[1], 'b', true, OPTION_ARG_TYPE_NUM,
2237 &block, &block_set, "block number");
2238 init_opts(&opts[2], 'c', false, OPTION_ARG_TYPE_FLG,
2239 &clear, NULL, "clear bad block marker");
2241 if (!scan_opts(argc, argv, 2, opts, NUM_ELEMS(opts), NULL, 0, NULL)) {
2242 nand_usage("invalid arguments");
2246 if (!ra_set && !block_set) {
2247 nand_usage("missing argument");
2250 if (ra_set && block_set) {
2251 nand_usage("options -f and -b are mutually exclusive");
2253 } else if (ra_set) {
2254 block = OFFSET_TO_BLOCK(ra & MXC_NAND_ADDR_MASK);
2256 ra = BLOCK_TO_OFFSET(block) + (unsigned long)flash_info.start;
2258 if ((ra % NF_BLK_SZ) != 0) {
2259 diag_printf("Address is not block aligned!\n");
2260 diag_printf("Block size is 0x%08x\n", NF_BLK_SZ);
2264 bad = nfc_is_badblock(block, g_bbt);
2265 if ((bad && !clear) || (!bad && clear)) {
2266 diag_printf("block %5u at address 0x%08x is already %s\n",
2267 block, ra, bad ? "bad" : "good");
2270 if (clear && bad != BLK_BAD_RUNTIME) {
2271 diag_printf("Refusing to mark a factory bad block as good!\n");
2274 if (!verify_action("Mark block %u at address 0x%08x %s in BBT",
2275 block, ra, clear ? "good" : "bad")) {
2276 diag_printf("** Aborted\n");
2280 nfc_printf(NFC_DEBUG_MIN, "Marking block %5u at 0x%08x %s\n",
2281 block, ra, clear ? "good" : "bad");
2282 mark_blk_bad(block, g_bbt, clear ? 0 : BLK_BAD_RUNTIME);
2283 mxc_nfc_update_bbt(g_mxc_nfc_bbt_main_descr,
2284 g_mxc_nfc_bbt_mirror_descr);
2287 static void do_nand_cmds(int argc, char *argv[])
2291 if (!mxcnfc_init_ok) {
2292 #ifdef CYGHWR_DEVS_FLASH_MXC_MULTI
2293 diag_printf("Warning: NAND flash hasn't been initialized. Try \"factive nand\" first\n\n");
2295 diag_printf("Error: NAND flash hasn't been initialized\n");
2301 nand_usage("too few arguments");
2305 if ((cmd = cmd_search(__NAND_cmds_TAB__, &__NAND_cmds_TAB_END__,
2306 argv[1])) != NULL) {
2307 cmd->fun(argc, argv);
2310 nand_usage("unrecognized command");
2314 * Display a memory region by 16-bit words
2315 * @param pkt pointer to the starting address of the memory
2316 * @param len byte length of the buffer to be displayed
2318 static void print_pkt_16(u16 *pkt, u32 len)
2320 diag_printf("******************** %d bytes********************\n", len);
2321 u32 i = 0, tempLen = (len + 1) / 2;
2323 while (tempLen != 0) {
2325 diag_printf("[%03x-%03x] ", i * 2, (i * 2) + 14);
2326 diag_printf("%04x %04x %04x %04x %04x %04x %04x %04x\n",
2327 pkt[i], pkt[i + 1], pkt[i + 2], pkt[i + 3],
2328 pkt[i + 4], pkt[i + 5], pkt[i + 6], pkt[i + 7]);
2333 diag_printf("[%03x-%03x]", i * 2, (i + tempLen) * 2);
2334 while (tempLen-- != 0) {
2335 diag_printf(" %04x", pkt[i++]);
2339 diag_printf("*************************************************\n");
2345 // addr = starting byte address within NAND flash
2346 static void print_page(u32 addr, bool spare_only)
2348 u32 i, pg_no, pg_off;
2349 u32 blk_num = OFFSET_TO_BLOCK(addr), pg_num = OFFSET_TO_PAGE(addr);
2351 if (addr % NF_PG_SZ) {
2352 diag_printf("Non page-aligned read not supported here: 0x%x\n", addr);
2356 diag_printf("Error %d: Not supported\n", __LINE__);
2359 pg_no = addr / NF_PG_SZ;
2360 pg_off = addr % NF_PG_SZ;
2361 for (i = 0; i < num_of_nand_chips; i++) {
2362 if (nfc_read_page(i, pg_no, pg_off) != 0) {
2363 diag_printf("Error %d: uncorrectable. But still printing ...\n", __LINE__);
2366 diag_printf("\n============ Printing block(%d) page(%d) ==============\n",
2369 diag_printf("<<<<<<<<< spare area >>>>>>>>>\n");
2370 print_pkt_16((u16*)NAND_SPAR_BUF0, NF_SPARE_SZ);
2373 diag_printf("<<<<<<<<< main area >>>>>>>>>\n");
2374 print_pkt_16((u16*)NAND_MAIN_BUF0, NF_PG_SZ / num_of_nand_chips);