1 # ====================================================================
5 # eCos serial SH/SE77X9 configuration data
7 # ====================================================================
8 #####ECOSGPLCOPYRIGHTBEGIN####
9 ## -------------------------------------------
10 ## This file is part of eCos, the Embedded Configurable Operating System.
11 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
13 ## eCos is free software; you can redistribute it and/or modify it under
14 ## the terms of the GNU General Public License as published by the Free
15 ## Software Foundation; either version 2 or (at your option) any later version.
17 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
18 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
22 ## You should have received a copy of the GNU General Public License along
23 ## with eCos; if not, write to the Free Software Foundation, Inc.,
24 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26 ## As a special exception, if other files instantiate templates or use macros
27 ## or inline functions from this file, or you compile this file and link it
28 ## with other works to produce a work based on this file, this file does not
29 ## by itself cause the resulting work to be covered by the GNU General Public
30 ## License. However the source code for this file must still be made available
31 ## in accordance with section (3) of the GNU General Public License.
33 ## This exception does not invalidate any other reasons why a work based on
34 ## this file might be covered by the GNU General Public License.
36 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
37 ## at http://sources.redhat.com/ecos/ecos-license/
38 ## -------------------------------------------
39 #####ECOSGPLCOPYRIGHTEND####
40 # ====================================================================
41 ######DESCRIPTIONBEGIN####
47 #####DESCRIPTIONEND####
49 # ====================================================================
52 cdl_package CYGPKG_IO_SERIAL_SH_SE77X9 {
53 display "SH3 SE77X9 serial device drivers"
55 parent CYGPKG_IO_SERIAL_DEVICES
56 active_if CYGPKG_IO_SERIAL
57 active_if CYGPKG_HAL_SH_SH77X9_SE77X9
63 This option enables the serial device drivers for the
64 Hitachi SH3 SE77X9 board, based on the generic SH SCI driver."
67 # FIXME: This really belongs in the SH_SCIF package
68 cdl_interface CYGINT_IO_SERIAL_SH_SCIF_REQUIRED {
69 display "SH SCI driver required"
72 # FIXME: This really belongs in the GENERIC_16X5X package
73 cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
74 display "Generic 16x5x serial driver required"
78 puts $::cdl_system_header "/***** serial driver proc output start *****/"
79 puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/sh_sh3_se77x9_16x5x.inl>"
80 puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_serial_sh_se77x9.h>"
81 puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_INL <cyg/io/sh_sh3_se77x9_scif.inl>"
82 puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_CFG <pkgconf/io_serial_sh_se77x9.h>"
83 puts $::cdl_system_header "/***** serial driver proc output end *****/"
86 cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM1 {
87 display "SH SE77X9 serial 1 driver (SuperIO)"
91 This option includes the serial device driver for the COM1
92 port. FIXME: Disabled due to being broken."
94 implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED
95 implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW
96 implements CYGINT_IO_SERIAL_LINE_STATUS_HW
98 cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME {
99 display "Device name for COM1"
101 default_value {"\"/dev/ser1\""}
103 This option specifies the device name for COM1."
106 cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD {
107 display "Baud rate for COM1"
109 legal_values { 4800 9600 14400 19200 38400 57600 115200 }
112 This option specifies the default baud rate (speed)
116 cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE {
117 display "Buffer size for COM1"
119 legal_values 0 to 8192
122 This option specifies the size of the internal buffers
123 used for the COM1 port."
128 cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM2 {
129 display "SE77X9 serial, SCIF port 2 driver"
133 This option includes the serial device driver for SCIF
136 implements CYGINT_IO_SERIAL_SH_SCIF_REQUIRED
137 implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW
138 implements CYGINT_IO_SERIAL_LINE_STATUS_HW
140 cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME {
141 display "Device name"
143 default_value {"\"/dev/ser2\""}
145 This option specifies the device name for the serial
149 cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD {
152 legal_values { 4800 9600 14400 19200 38400 57600 115200 }
155 This option specifies the default baud rate (speed)
156 for the serial driver."
159 cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE {
160 display "Buffer size"
162 legal_values 0 to 8192
165 This option specifies the size of the internal buffers
166 used for the serial driver."
169 cdl_option CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA {
170 display "Enable SCIF serial driver DMA"
171 active_if CYGINT_HAL_SH_DMA_CHANNELS
172 implements CYGINT_HAL_SH_DMA_CHANNELS_USED
173 implements CYGINT_IO_SERIAL_SH_SCIF_DMA
176 Enable DMA for this port."
180 cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_TESTING {
181 display "Testing parameters"
185 active_if CYGPKG_IO_SERIAL_SH_SE77X9_COM2
188 puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"sh-se77x9\""
189 puts $::cdl_header "#define CYGPRI_SER_TEST_SER_DEV CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME"
190 puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV \"/dev/tty2\""
194 # EOF ser_sh_se77x9.cdl