2 tristate "SoC I2S Audio for the ADI Blackfin chip"
4 select SND_BF5XX_SOC_SPORT if !BF60x
5 select SND_BF6XX_SOC_SPORT if BF60x
7 Say Y or M if you want to add support for codecs attached to
8 the Blackfin SPORT (synchronous serial ports) interface in I2S
9 mode (supports single stereo In/Out).
10 You will also need to select the audio interfaces to support below.
12 config SND_BF5XX_SOC_SSM2602
13 tristate "SoC SSM2602 Audio Codec Add-On Card support"
14 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
15 select SND_BF5XX_SOC_I2S if !BF60x
16 select SND_BF6XX_SOC_I2S if BF60x
17 select SND_SOC_SSM2602_SPI if SPI_MASTER
18 select SND_SOC_SSM2602_I2C if I2C
20 Say Y if you want to add support for the Analog Devices
21 SSM2602 Audio Codec Add-On Card.
23 config SND_SOC_BFIN_EVAL_ADAU1701
24 tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
25 depends on SND_BF5XX_I2S && I2C
26 select SND_BF5XX_SOC_I2S
27 select SND_SOC_ADAU1701
29 Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
30 board connected to one of the Blackfin evaluation boards like the
31 BF5XX-STAMP or BF5XX-EZKIT.
33 config SND_SOC_BFIN_EVAL_ADAU1373
34 tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
35 depends on SND_BF5XX_I2S && I2C
36 select SND_BF5XX_SOC_I2S
37 select SND_SOC_ADAU1373
39 Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
40 board connected to one of the Blackfin evaluation boards like the
41 BF5XX-STAMP or BF5XX-EZKIT.
43 Note: This driver assumes that first ADAU1373 DAI is connected to the
44 first SPORT port on the BF5XX board.
46 config SND_SOC_BFIN_EVAL_ADAV80X
47 tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
48 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
49 select SND_BF5XX_SOC_I2S
50 select SND_SOC_ADAV801 if SPI_MASTER
51 select SND_SOC_ADAV803 if I2C
53 Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
54 EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
55 like the BF5XX-STAMP or BF5XX-EZKIT.
57 Note: This driver assumes that the ADAV80X digital record and playback
58 interfaces are connected to the first SPORT port on the BF5XX board.
60 config SND_BF5XX_SOC_AD1836
61 tristate "SoC AD1836 Audio support for BF5xx"
62 depends on SND_BF5XX_I2S && SPI_MASTER
63 select SND_BF5XX_SOC_I2S
66 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
68 config SND_BF5XX_SOC_AD193X
69 tristate "SoC AD193X Audio support for Blackfin"
70 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
71 select SND_BF5XX_SOC_I2S
72 select SND_SOC_AD193X_I2C if I2C
73 select SND_SOC_AD193X_SPI if SPI_MASTER
75 Say Y if you want to add support for AD193X codec on Blackfin.
76 This driver supports AD1936, AD1937, AD1938 and AD1939.
78 config SND_BF5XX_SOC_AD73311
79 tristate "SoC AD73311 Audio support for Blackfin"
80 depends on SND_BF5XX_I2S
81 select SND_BF5XX_SOC_I2S
82 select SND_SOC_AD73311
84 Say Y if you want to add support for AD73311 codec on Blackfin.
86 config SND_BFIN_AD73311_SE
87 int "PF pin for AD73311L Chip Select"
88 depends on SND_BF5XX_SOC_AD73311
91 Enter the GPIO used to control AD73311's SE pin. Acceptable
95 tristate "SoC AC97 Audio for the ADI BF5xx chip"
98 select SND_SOC_AC97_BUS
99 select SND_BF5XX_SOC_SPORT
100 select SND_BF5XX_SOC_AC97
102 Say Y or M if you want to add support for codecs attached to
103 the Blackfin SPORT (synchronous serial ports) interface in slot 16
104 mode (pseudo AC97 interface).
105 You will also need to select the audio interfaces to support below.
108 AC97 codecs which do not implement the slot-16 mode will not function
109 properly with this driver. This driver is known to work with the
110 Analog Devices line of AC97 codecs.
112 config SND_BF5XX_MMAP_SUPPORT
113 bool "Enable MMAP Support"
114 depends on SND_BF5XX_AC97
117 Say y if you want AC97 driver to support mmap mode.
118 We introduce an intermediate buffer to simulate mmap.
120 config SND_BF5XX_MULTICHAN_SUPPORT
121 bool "Enable Multichannel Support"
122 depends on SND_BF5XX_AC97
125 Say y if you want AC97 driver to support up to 5.1 channel audio.
126 this mode will consume much more memory for DMA.
128 config SND_BF5XX_HAVE_COLD_RESET
129 bool "BOARD has COLD Reset GPIO"
130 depends on SND_BF5XX_AC97
131 default y if BFIN548_EZKIT
132 default n if !BFIN548_EZKIT
134 config SND_BF5XX_RESET_GPIO_NUM
135 int "Set a GPIO for cold reset"
136 depends on SND_BF5XX_HAVE_COLD_RESET
138 default 19 if BFIN548_EZKIT
139 default 5 if BFIN537_STAMP
142 Set the correct GPIO for RESET the sound chip.
144 config SND_BF5XX_SOC_AD1980
145 tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
146 depends on SND_BF5XX_AC97
147 select SND_BF5XX_SOC_AC97
148 select SND_SOC_AD1980
150 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
153 Because Analog Devices Inc. discontinued the ad1980 sound chip since
154 Sep. 2009, this ad1980 driver is not maintained, tested and supported
157 config SND_BF5XX_SOC_SPORT
160 config SND_BF6XX_SOC_SPORT
163 config SND_BF5XX_SOC_I2S
166 config SND_BF6XX_SOC_I2S
169 config SND_BF5XX_SOC_AC97
172 config SND_BF5XX_SPORT_NUM
173 int "Set a SPORT for Sound chip"
174 depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
179 Set the correct SPORT for sound chip.