sound/soc/codecs/wm8993.c

   1 /*
   2  * wm8993.c -- WM8993 ALSA SoC audio driver
   3  *
   4  * Copyright 2009, 2010 Wolfson Microelectronics plc
   5  *
   6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/moduleparam.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/pm.h>
  18 #include <linux/i2c.h>
  19 #include <linux/regulator/consumer.h>
  20 #include <linux/spi/spi.h>
  21 #include <sound/core.h>
  22 #include <sound/pcm.h>
  23 #include <sound/pcm_params.h>
  24 #include <sound/tlv.h>
  25 #include <sound/soc.h>
  26 #include <sound/soc-dapm.h>
  27 #include <sound/initval.h>
  28 #include <sound/wm8993.h>
  29
  30 #include "wm8993.h"
  31 #include "wm_hubs.h"
  32
  33 #define WM8993_NUM_SUPPLIES 6
  34 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
  35         "DCVDD",
  36         "DBVDD",
  37         "AVDD1",
  38         "AVDD2",
  39         "CPVDD",
  40         "SPKVDD",
  41 };
  42
  43 static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
  44         0x8993,     /* R0   - Software Reset */
  45         0x0000,     /* R1   - Power Management (1) */
  46         0x6000,     /* R2   - Power Management (2) */
  47         0x0000,     /* R3   - Power Management (3) */
  48         0x4050,     /* R4   - Audio Interface (1) */
  49         0x4000,     /* R5   - Audio Interface (2) */
  50         0x01C8,     /* R6   - Clocking 1 */
  51         0x0000,     /* R7   - Clocking 2 */
  52         0x0000,     /* R8   - Audio Interface (3) */
  53         0x0040,     /* R9   - Audio Interface (4) */
  54         0x0004,     /* R10  - DAC CTRL */
  55         0x00C0,     /* R11  - Left DAC Digital Volume */
  56         0x00C0,     /* R12  - Right DAC Digital Volume */
  57         0x0000,     /* R13  - Digital Side Tone */
  58         0x0300,     /* R14  - ADC CTRL */
  59         0x00C0,     /* R15  - Left ADC Digital Volume */
  60         0x00C0,     /* R16  - Right ADC Digital Volume */
  61         0x0000,     /* R17 */
  62         0x0000,     /* R18  - GPIO CTRL 1 */
  63         0x0010,     /* R19  - GPIO1 */
  64         0x0000,     /* R20  - IRQ_DEBOUNCE */
  65         0x0000,     /* R21 */
  66         0x8000,     /* R22  - GPIOCTRL 2 */
  67         0x0800,     /* R23  - GPIO_POL */
  68         0x008B,     /* R24  - Left Line Input 1&2 Volume */
  69         0x008B,     /* R25  - Left Line Input 3&4 Volume */
  70         0x008B,     /* R26  - Right Line Input 1&2 Volume */
  71         0x008B,     /* R27  - Right Line Input 3&4 Volume */
  72         0x006D,     /* R28  - Left Output Volume */
  73         0x006D,     /* R29  - Right Output Volume */
  74         0x0066,     /* R30  - Line Outputs Volume */
  75         0x0020,     /* R31  - HPOUT2 Volume */
  76         0x0079,     /* R32  - Left OPGA Volume */
  77         0x0079,     /* R33  - Right OPGA Volume */
  78         0x0003,     /* R34  - SPKMIXL Attenuation */
  79         0x0003,     /* R35  - SPKMIXR Attenuation */
  80         0x0011,     /* R36  - SPKOUT Mixers */
  81         0x0100,     /* R37  - SPKOUT Boost */
  82         0x0079,     /* R38  - Speaker Volume Left */
  83         0x0079,     /* R39  - Speaker Volume Right */
  84         0x0000,     /* R40  - Input Mixer2 */
  85         0x0000,     /* R41  - Input Mixer3 */
  86         0x0000,     /* R42  - Input Mixer4 */
  87         0x0000,     /* R43  - Input Mixer5 */
  88         0x0000,     /* R44  - Input Mixer6 */
  89         0x0000,     /* R45  - Output Mixer1 */
  90         0x0000,     /* R46  - Output Mixer2 */
  91         0x0000,     /* R47  - Output Mixer3 */
  92         0x0000,     /* R48  - Output Mixer4 */
  93         0x0000,     /* R49  - Output Mixer5 */
  94         0x0000,     /* R50  - Output Mixer6 */
  95         0x0000,     /* R51  - HPOUT2 Mixer */
  96         0x0000,     /* R52  - Line Mixer1 */
  97         0x0000,     /* R53  - Line Mixer2 */
  98         0x0000,     /* R54  - Speaker Mixer */
  99         0x0000,     /* R55  - Additional Control */
 100         0x0000,     /* R56  - AntiPOP1 */
 101         0x0000,     /* R57  - AntiPOP2 */
 102         0x0000,     /* R58  - MICBIAS */
 103         0x0000,     /* R59 */
 104         0x0000,     /* R60  - FLL Control 1 */
 105         0x0000,     /* R61  - FLL Control 2 */
 106         0x0000,     /* R62  - FLL Control 3 */
 107         0x2EE0,     /* R63  - FLL Control 4 */
 108         0x0002,     /* R64  - FLL Control 5 */
 109         0x2287,     /* R65  - Clocking 3 */
 110         0x025F,     /* R66  - Clocking 4 */
 111         0x0000,     /* R67  - MW Slave Control */
 112         0x0000,     /* R68 */
 113         0x0002,     /* R69  - Bus Control 1 */
 114         0x0000,     /* R70  - Write Sequencer 0 */
 115         0x0000,     /* R71  - Write Sequencer 1 */
 116         0x0000,     /* R72  - Write Sequencer 2 */
 117         0x0000,     /* R73  - Write Sequencer 3 */
 118         0x0000,     /* R74  - Write Sequencer 4 */
 119         0x0000,     /* R75  - Write Sequencer 5 */
 120         0x1F25,     /* R76  - Charge Pump 1 */
 121         0x0000,     /* R77 */
 122         0x0000,     /* R78 */
 123         0x0000,     /* R79 */
 124         0x0000,     /* R80 */
 125         0x0000,     /* R81  - Class W 0 */
 126         0x0000,     /* R82 */
 127         0x0000,     /* R83 */
 128         0x0000,     /* R84  - DC Servo 0 */
 129         0x054A,     /* R85  - DC Servo 1 */
 130         0x0000,     /* R86 */
 131         0x0000,     /* R87  - DC Servo 3 */
 132         0x0000,     /* R88  - DC Servo Readback 0 */
 133         0x0000,     /* R89  - DC Servo Readback 1 */
 134         0x0000,     /* R90  - DC Servo Readback 2 */
 135         0x0000,     /* R91 */
 136         0x0000,     /* R92 */
 137         0x0000,     /* R93 */
 138         0x0000,     /* R94 */
 139         0x0000,     /* R95 */
 140         0x0100,     /* R96  - Analogue HP 0 */
 141         0x0000,     /* R97 */
 142         0x0000,     /* R98  - EQ1 */
 143         0x000C,     /* R99  - EQ2 */
 144         0x000C,     /* R100 - EQ3 */
 145         0x000C,     /* R101 - EQ4 */
 146         0x000C,     /* R102 - EQ5 */
 147         0x000C,     /* R103 - EQ6 */
 148         0x0FCA,     /* R104 - EQ7 */
 149         0x0400,     /* R105 - EQ8 */
 150         0x00D8,     /* R106 - EQ9 */
 151         0x1EB5,     /* R107 - EQ10 */
 152         0xF145,     /* R108 - EQ11 */
 153         0x0B75,     /* R109 - EQ12 */
 154         0x01C5,     /* R110 - EQ13 */
 155         0x1C58,     /* R111 - EQ14 */
 156         0xF373,     /* R112 - EQ15 */
 157         0x0A54,     /* R113 - EQ16 */
 158         0x0558,     /* R114 - EQ17 */
 159         0x168E,     /* R115 - EQ18 */
 160         0xF829,     /* R116 - EQ19 */
 161         0x07AD,     /* R117 - EQ20 */
 162         0x1103,     /* R118 - EQ21 */
 163         0x0564,     /* R119 - EQ22 */
 164         0x0559,     /* R120 - EQ23 */
 165         0x4000,     /* R121 - EQ24 */
 166         0x0000,     /* R122 - Digital Pulls */
 167         0x0F08,     /* R123 - DRC Control 1 */
 168         0x0000,     /* R124 - DRC Control 2 */
 169         0x0080,     /* R125 - DRC Control 3 */
 170         0x0000,     /* R126 - DRC Control 4 */
 171 };
 172
 173 static struct {
 174         int ratio;
 175         int clk_sys_rate;
 176 } clk_sys_rates[] = {
 177         { 64,   0 },
 178         { 128,  1 },
 179         { 192,  2 },
 180         { 256,  3 },
 181         { 384,  4 },
 182         { 512,  5 },
 183         { 768,  6 },
 184         { 1024, 7 },
 185         { 1408, 8 },
 186         { 1536, 9 },
 187 };
 188
 189 static struct {
 190         int rate;
 191         int sample_rate;
 192 } sample_rates[] = {
 193         { 8000,  0  },
 194         { 11025, 1  },
 195         { 12000, 1  },
 196         { 16000, 2  },
 197         { 22050, 3  },
 198         { 24000, 3  },
 199         { 32000, 4  },
 200         { 44100, 5  },
 201         { 48000, 5  },
 202 };
 203
 204 static struct {
 205         int div; /* *10 due to .5s */
 206         int bclk_div;
 207 } bclk_divs[] = {
 208         { 10,  0  },
 209         { 15,  1  },
 210         { 20,  2  },
 211         { 30,  3  },
 212         { 40,  4  },
 213         { 55,  5  },
 214         { 60,  6  },
 215         { 80,  7  },
 216         { 110, 8  },
 217         { 120, 9  },
 218         { 160, 10 },
 219         { 220, 11 },
 220         { 240, 12 },
 221         { 320, 13 },
 222         { 440, 14 },
 223         { 480, 15 },
 224 };
 225
 226 struct wm8993_priv {
 227         struct wm_hubs_data hubs_data;
 228         u16 reg_cache[WM8993_REGISTER_COUNT];
 229         struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 230         struct wm8993_platform_data pdata;
 231         struct snd_soc_codec codec;
 232         int master;
 233         int sysclk_source;
 234         int tdm_slots;
 235         int tdm_width;
 236         unsigned int mclk_rate;
 237         unsigned int sysclk_rate;
 238         unsigned int fs;
 239         unsigned int bclk;
 240         int class_w_users;
 241         unsigned int fll_fref;
 242         unsigned int fll_fout;
 243         int fll_src;
 244 };
 245
 246 static int wm8993_volatile(unsigned int reg)
 247 {
 248         switch (reg) {
 249         case WM8993_SOFTWARE_RESET:
 250         case WM8993_DC_SERVO_0:
 251         case WM8993_DC_SERVO_READBACK_0:
 252         case WM8993_DC_SERVO_READBACK_1:
 253         case WM8993_DC_SERVO_READBACK_2:
 254                 return 1;
 255         default:
 256                 return 0;
 257         }
 258 }
 259
 260 struct _fll_div {
 261         u16 fll_fratio;
 262         u16 fll_outdiv;
 263         u16 fll_clk_ref_div;
 264         u16 n;
 265         u16 k;
 266 };
 267
 268 /* The size in bits of the FLL divide multiplied by 10
 269  * to allow rounding later */
 270 #define FIXED_FLL_SIZE ((1 << 16) * 10)
 271
 272 static struct {
 273         unsigned int min;
 274         unsigned int max;
 275         u16 fll_fratio;
 276         int ratio;
 277 } fll_fratios[] = {
 278         {       0,    64000, 4, 16 },
 279         {   64000,   128000, 3,  8 },
 280         {  128000,   256000, 2,  4 },
 281         {  256000,  1000000, 1,  2 },
 282         { 1000000, 13500000, 0,  1 },
 283 };
 284
 285 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 286                        unsigned int Fout)
 287 {
 288         u64 Kpart;
 289         unsigned int K, Ndiv, Nmod, target;
 290         unsigned int div;
 291         int i;
 292
 293         /* Fref must be <=13.5MHz */
 294         div = 1;
 295         fll_div->fll_clk_ref_div = 0;
 296         while ((Fref / div) > 13500000) {
 297                 div *= 2;
 298                 fll_div->fll_clk_ref_div++;
 299
 300                 if (div > 8) {
 301                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 302                                Fref);
 303                         return -EINVAL;
 304                 }
 305         }
 306
 307         pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 308
 309         /* Apply the division for our remaining calculations */
 310         Fref /= div;
 311
 312         /* Fvco should be 90-100MHz; don't check the upper bound */
 313         div = 0;
 314         target = Fout * 2;
 315         while (target < 90000000) {
 316                 div++;
 317                 target *= 2;
 318                 if (div > 7) {
 319                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 320                                Fout);
 321                         return -EINVAL;
 322                 }
 323         }
 324         fll_div->fll_outdiv = div;
 325
 326         pr_debug("Fvco=%dHz\n", target);
 327
 328         /* Find an appropraite FLL_FRATIO and factor it out of the target */
 329         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 330                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 331                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 332                         target /= fll_fratios[i].ratio;
 333                         break;
 334                 }
 335         }
 336         if (i == ARRAY_SIZE(fll_fratios)) {
 337                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 338                 return -EINVAL;
 339         }
 340
 341         /* Now, calculate N.K */
 342         Ndiv = target / Fref;
 343
 344         fll_div->n = Ndiv;
 345         Nmod = target % Fref;
 346         pr_debug("Nmod=%d\n", Nmod);
 347
 348         /* Calculate fractional part - scale up so we can round. */
 349         Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 350
 351         do_div(Kpart, Fref);
 352
 353         K = Kpart & 0xFFFFFFFF;
 354
 355         if ((K % 10) >= 5)
 356                 K += 5;
 357
 358         /* Move down to proper range now rounding is done */
 359         fll_div->k = K / 10;
 360
 361         pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 362                  fll_div->n, fll_div->k,
 363                  fll_div->fll_fratio, fll_div->fll_outdiv,
 364                  fll_div->fll_clk_ref_div);
 365
 366         return 0;
 367 }
 368
 369 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 370                           unsigned int Fref, unsigned int Fout)
 371 {
 372         struct snd_soc_codec *codec = dai->codec;
 373         struct wm8993_priv *wm8993 = codec->private_data;
 374         u16 reg1, reg4, reg5;
 375         struct _fll_div fll_div;
 376         int ret;
 377
 378         /* Any change? */
 379         if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
 380                 return 0;
 381
 382         /* Disable the FLL */
 383         if (Fout == 0) {
 384                 dev_dbg(codec->dev, "FLL disabled\n");
 385                 wm8993->fll_fref = 0;
 386                 wm8993->fll_fout = 0;
 387
 388                 reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 389                 reg1 &= ~WM8993_FLL_ENA;
 390                 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 391
 392                 return 0;
 393         }
 394
 395         ret = fll_factors(&fll_div, Fref, Fout);
 396         if (ret != 0)
 397                 return ret;
 398
 399         reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
 400         reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
 401
 402         switch (fll_id) {
 403         case WM8993_FLL_MCLK:
 404                 break;
 405
 406         case WM8993_FLL_LRCLK:
 407                 reg5 |= 1;
 408                 break;
 409
 410         case WM8993_FLL_BCLK:
 411                 reg5 |= 2;
 412                 break;
 413
 414         default:
 415                 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
 416                 return -EINVAL;
 417         }
 418
 419         /* Any FLL configuration change requires that the FLL be
 420          * disabled first. */
 421         reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 422         reg1 &= ~WM8993_FLL_ENA;
 423         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 424
 425         /* Apply the configuration */
 426         if (fll_div.k)
 427                 reg1 |= WM8993_FLL_FRAC_MASK;
 428         else
 429                 reg1 &= ~WM8993_FLL_FRAC_MASK;
 430         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 431
 432         snd_soc_write(codec, WM8993_FLL_CONTROL_2,
 433                       (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
 434                       (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
 435         snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
 436
 437         reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
 438         reg4 &= ~WM8993_FLL_N_MASK;
 439         reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
 440         snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
 441
 442         reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
 443         reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 444         snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
 445
 446         /* Enable the FLL */
 447         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 448
 449         dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 450
 451         wm8993->fll_fref = Fref;
 452         wm8993->fll_fout = Fout;
 453         wm8993->fll_src = source;
 454
 455         return 0;
 456 }
 457
 458 static int configure_clock(struct snd_soc_codec *codec)
 459 {
 460         struct wm8993_priv *wm8993 = codec->private_data;
 461         unsigned int reg;
 462
 463         /* This should be done on init() for bypass paths */
 464         switch (wm8993->sysclk_source) {
 465         case WM8993_SYSCLK_MCLK:
 466                 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
 467
 468                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 469                 reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
 470                 if (wm8993->mclk_rate > 13500000) {
 471                         reg |= WM8993_MCLK_DIV;
 472                         wm8993->sysclk_rate = wm8993->mclk_rate / 2;
 473                 } else {
 474                         reg &= ~WM8993_MCLK_DIV;
 475                         wm8993->sysclk_rate = wm8993->mclk_rate;
 476                 }
 477                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 478                 break;
 479
 480         case WM8993_SYSCLK_FLL:
 481                 dev_dbg(codec->dev, "Using %dHz FLL clock\n",
 482                         wm8993->fll_fout);
 483
 484                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 485                 reg |= WM8993_SYSCLK_SRC;
 486                 if (wm8993->fll_fout > 13500000) {
 487                         reg |= WM8993_MCLK_DIV;
 488                         wm8993->sysclk_rate = wm8993->fll_fout / 2;
 489                 } else {
 490                         reg &= ~WM8993_MCLK_DIV;
 491                         wm8993->sysclk_rate = wm8993->fll_fout;
 492                 }
 493                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 494                 break;
 495
 496         default:
 497                 dev_err(codec->dev, "System clock not configured\n");
 498                 return -EINVAL;
 499         }
 500
 501         dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
 502
 503         return 0;
 504 }
 505
 506 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
 507 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
 508 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 509 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 510 static const unsigned int drc_max_tlv[] = {
 511         TLV_DB_RANGE_HEAD(4),
 512         0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 513         3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
 514 };
 515 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 516 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
 517 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 518 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 519 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
 520
 521 static const char *dac_deemph_text[] = {
 522         "None",
 523         "32kHz",
 524         "44.1kHz",
 525         "48kHz",
 526 };
 527
 528 static const struct soc_enum dac_deemph =
 529         SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
 530
 531 static const char *adc_hpf_text[] = {
 532         "Hi-Fi",
 533         "Voice 1",
 534         "Voice 2",
 535         "Voice 3",
 536 };
 537
 538 static const struct soc_enum adc_hpf =
 539         SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
 540
 541 static const char *drc_path_text[] = {
 542         "ADC",
 543         "DAC"
 544 };
 545
 546 static const struct soc_enum drc_path =
 547         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
 548
 549 static const char *drc_r0_text[] = {
 550         "1",
 551         "1/2",
 552         "1/4",
 553         "1/8",
 554         "1/16",
 555         "0",
 556 };
 557
 558 static const struct soc_enum drc_r0 =
 559         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
 560
 561 static const char *drc_r1_text[] = {
 562         "1",
 563         "1/2",
 564         "1/4",
 565         "1/8",
 566         "0",
 567 };
 568
 569 static const struct soc_enum drc_r1 =
 570         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
 571
 572 static const char *drc_attack_text[] = {
 573         "Reserved",
 574         "181us",
 575         "363us",
 576         "726us",
 577         "1.45ms",
 578         "2.9ms",
 579         "5.8ms",
 580         "11.6ms",
 581         "23.2ms",
 582         "46.4ms",
 583         "92.8ms",
 584         "185.6ms",
 585 };
 586
 587 static const struct soc_enum drc_attack =
 588         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
 589
 590 static const char *drc_decay_text[] = {
 591         "186ms",
 592         "372ms",
 593         "743ms",
 594         "1.49s",
 595         "2.97ms",
 596         "5.94ms",
 597         "11.89ms",
 598         "23.78ms",
 599         "47.56ms",
 600 };
 601
 602 static const struct soc_enum drc_decay =
 603         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
 604
 605 static const char *drc_ff_text[] = {
 606         "5 samples",
 607         "9 samples",
 608 };
 609
 610 static const struct soc_enum drc_ff =
 611         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
 612
 613 static const char *drc_qr_rate_text[] = {
 614         "0.725ms",
 615         "1.45ms",
 616         "5.8ms",
 617 };
 618
 619 static const struct soc_enum drc_qr_rate =
 620         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
 621
 622 static const char *drc_smooth_text[] = {
 623         "Low",
 624         "Medium",
 625         "High",
 626 };
 627
 628 static const struct soc_enum drc_smooth =
 629         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
 630
 631 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
 632 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
 633                5, 9, 12, 0, sidetone_tlv),
 634
 635 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
 636 SOC_ENUM("DRC Path", drc_path),
 637 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
 638                2, 60, 1, drc_comp_threash),
 639 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
 640                11, 30, 1, drc_comp_amp),
 641 SOC_ENUM("DRC R0", drc_r0),
 642 SOC_ENUM("DRC R1", drc_r1),
 643 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
 644                drc_min_tlv),
 645 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
 646                drc_max_tlv),
 647 SOC_ENUM("DRC Attack Rate", drc_attack),
 648 SOC_ENUM("DRC Decay Rate", drc_decay),
 649 SOC_ENUM("DRC FF Delay", drc_ff),
 650 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
 651 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
 652 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
 653                drc_qr_tlv),
 654 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
 655 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
 656 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
 657 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
 658 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
 659                drc_startup_tlv),
 660
 661 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
 662
 663 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
 664                  WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 665 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
 666 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
 667
 668 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
 669                  WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 670 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
 671                dac_boost_tlv),
 672 SOC_ENUM("DAC Deemphasis", dac_deemph),
 673
 674 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
 675                2, 1, 1, wm_hubs_spkmix_tlv),
 676
 677 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
 678                2, 1, 1, wm_hubs_spkmix_tlv),
 679 };
 680
 681 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
 682 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
 683 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
 684 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
 685 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
 686 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
 687 };
 688
 689 static int clk_sys_event(struct snd_soc_dapm_widget *w,
 690                          struct snd_kcontrol *kcontrol, int event)
 691 {
 692         struct snd_soc_codec *codec = w->codec;
 693
 694         switch (event) {
 695         case SND_SOC_DAPM_PRE_PMU:
 696                 return configure_clock(codec);
 697
 698         case SND_SOC_DAPM_POST_PMD:
 699                 break;
 700         }
 701
 702         return 0;
 703 }
 704
 705 /*
 706  * When used with DAC outputs only the WM8993 charge pump supports
 707  * operation in class W mode, providing very low power consumption
 708  * when used with digital sources.  Enable and disable this mode
 709  * automatically depending on the mixer configuration.
 710  *
 711  * Currently the only supported paths are the direct DAC->headphone
 712  * paths (which provide minimum power consumption anyway).
 713  */
 714 static int class_w_put(struct snd_kcontrol *kcontrol,
 715                        struct snd_ctl_elem_value *ucontrol)
 716 {
 717         struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
 718         struct snd_soc_codec *codec = widget->codec;
 719         struct wm8993_priv *wm8993 = codec->private_data;
 720         int ret;
 721
 722         /* Turn it off if we're using the main output mixer */
 723         if (ucontrol->value.integer.value[0] == 0) {
 724                 if (wm8993->class_w_users == 0) {
 725                         dev_dbg(codec->dev, "Disabling Class W\n");
 726                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
 727                                             WM8993_CP_DYN_FREQ |
 728                                             WM8993_CP_DYN_V,
 729                                             0);
 730                 }
 731                 wm8993->class_w_users++;
 732         }
 733
 734         /* Implement the change */
 735         ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
 736
 737         /* Enable it if we're using the direct DAC path */
 738         if (ucontrol->value.integer.value[0] == 1) {
 739                 if (wm8993->class_w_users == 1) {
 740                         dev_dbg(codec->dev, "Enabling Class W\n");
 741                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
 742                                             WM8993_CP_DYN_FREQ |
 743                                             WM8993_CP_DYN_V,
 744                                             WM8993_CP_DYN_FREQ |
 745                                             WM8993_CP_DYN_V);
 746                 }
 747                 wm8993->class_w_users--;
 748         }
 749
 750         dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
 751                 wm8993->class_w_users);
 752
 753         return ret;
 754 }
 755
 756 #define SOC_DAPM_ENUM_W(xname, xenum) \
 757 {       .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 758         .info = snd_soc_info_enum_double, \
 759         .get = snd_soc_dapm_get_enum_double, \
 760         .put = class_w_put, \
 761         .private_value = (unsigned long)&xenum }
 762
 763 static const char *hp_mux_text[] = {
 764         "Mixer",
 765         "DAC",
 766 };
 767
 768 static const struct soc_enum hpl_enum =
 769         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
 770
 771 static const struct snd_kcontrol_new hpl_mux =
 772         SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
 773
 774 static const struct soc_enum hpr_enum =
 775         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
 776
 777 static const struct snd_kcontrol_new hpr_mux =
 778         SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
 779
 780 static const struct snd_kcontrol_new left_speaker_mixer[] = {
 781 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
 782 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
 783 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
 784 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 785 };
 786
 787 static const struct snd_kcontrol_new right_speaker_mixer[] = {
 788 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 789 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
 790 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
 791 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
 792 };
 793
 794 static const char *aif_text[] = {
 795         "Left", "Right"
 796 };
 797
 798 static const struct soc_enum aifoutl_enum =
 799         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
 800
 801 static const struct snd_kcontrol_new aifoutl_mux =
 802         SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
 803
 804 static const struct soc_enum aifoutr_enum =
 805         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
 806
 807 static const struct snd_kcontrol_new aifoutr_mux =
 808         SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
 809
 810 static const struct soc_enum aifinl_enum =
 811         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
 812
 813 static const struct snd_kcontrol_new aifinl_mux =
 814         SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
 815
 816 static const struct soc_enum aifinr_enum =
 817         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
 818
 819 static const struct snd_kcontrol_new aifinr_mux =
 820         SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
 821
 822 static const char *sidetone_text[] = {
 823         "None", "Left", "Right"
 824 };
 825
 826 static const struct soc_enum sidetonel_enum =
 827         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
 828
 829 static const struct snd_kcontrol_new sidetonel_mux =
 830         SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
 831
 832 static const struct soc_enum sidetoner_enum =
 833         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
 834
 835 static const struct snd_kcontrol_new sidetoner_mux =
 836         SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
 837
 838 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
 839 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
 840                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 841 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
 842 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
 843
 844 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
 845 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
 846
 847 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
 848 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
 849
 850 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 851 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 852
 853 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 854 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
 855
 856 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
 857 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
 858
 859 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
 860 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
 861
 862 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
 863 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
 864
 865 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
 866 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
 867
 868 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
 869                    left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
 870 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
 871                    right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 872
 873 };
 874
 875 static const struct snd_soc_dapm_route routes[] = {
 876         { "ADCL", NULL, "CLK_SYS" },
 877         { "ADCL", NULL, "CLK_DSP" },
 878         { "ADCR", NULL, "CLK_SYS" },
 879         { "ADCR", NULL, "CLK_DSP" },
 880
 881         { "AIFOUTL Mux", "Left", "ADCL" },
 882         { "AIFOUTL Mux", "Right", "ADCR" },
 883         { "AIFOUTR Mux", "Left", "ADCL" },
 884         { "AIFOUTR Mux", "Right", "ADCR" },
 885
 886         { "AIFOUTL", NULL, "AIFOUTL Mux" },
 887         { "AIFOUTR", NULL, "AIFOUTR Mux" },
 888
 889         { "DACL Mux", "Left", "AIFINL" },
 890         { "DACL Mux", "Right", "AIFINR" },
 891         { "DACR Mux", "Left", "AIFINL" },
 892         { "DACR Mux", "Right", "AIFINR" },
 893
 894         { "DACL Sidetone", "Left", "ADCL" },
 895         { "DACL Sidetone", "Right", "ADCR" },
 896         { "DACR Sidetone", "Left", "ADCL" },
 897         { "DACR Sidetone", "Right", "ADCR" },
 898
 899         { "DACL", NULL, "CLK_SYS" },
 900         { "DACL", NULL, "CLK_DSP" },
 901         { "DACL", NULL, "DACL Mux" },
 902         { "DACL", NULL, "DACL Sidetone" },
 903         { "DACR", NULL, "CLK_SYS" },
 904         { "DACR", NULL, "CLK_DSP" },
 905         { "DACR", NULL, "DACR Mux" },
 906         { "DACR", NULL, "DACR Sidetone" },
 907
 908         { "Left Output Mixer", "DAC Switch", "DACL" },
 909
 910         { "Right Output Mixer", "DAC Switch", "DACR" },
 911
 912         { "Left Output PGA", NULL, "CLK_SYS" },
 913
 914         { "Right Output PGA", NULL, "CLK_SYS" },
 915
 916         { "SPKL", "DAC Switch", "DACL" },
 917         { "SPKL", NULL, "CLK_SYS" },
 918
 919         { "SPKR", "DAC Switch", "DACR" },
 920         { "SPKR", NULL, "CLK_SYS" },
 921
 922         { "Left Headphone Mux", "DAC", "DACL" },
 923         { "Right Headphone Mux", "DAC", "DACR" },
 924 };
 925
 926 static void wm8993_cache_restore(struct snd_soc_codec *codec)
 927 {
 928         u16 *cache = codec->reg_cache;
 929         int i;
 930
 931         if (!codec->cache_sync)
 932                 return;
 933
 934         /* Reenable hardware writes */
 935         codec->cache_only = 0;
 936
 937         /* Restore the register settings */
 938         for (i = 1; i < WM8993_MAX_REGISTER; i++) {
 939                 if (cache[i] == wm8993_reg_defaults[i])
 940                         continue;
 941                 snd_soc_write(codec, i, cache[i]);
 942         }
 943
 944         /* We're in sync again */
 945         codec->cache_sync = 0;
 946 }
 947
 948 static int wm8993_set_bias_level(struct snd_soc_codec *codec,
 949                                  enum snd_soc_bias_level level)
 950 {
 951         struct wm8993_priv *wm8993 = codec->private_data;
 952         int ret;
 953
 954         switch (level) {
 955         case SND_SOC_BIAS_ON:
 956         case SND_SOC_BIAS_PREPARE:
 957                 /* VMID=2*40k */
 958                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
 959                                     WM8993_VMID_SEL_MASK, 0x2);
 960                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
 961                                     WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
 962                 break;
 963
 964         case SND_SOC_BIAS_STANDBY:
 965                 if (codec->bias_level == SND_SOC_BIAS_OFF) {
 966                         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
 967                                                     wm8993->supplies);
 968                         if (ret != 0)
 969                                 return ret;
 970
 971                         wm8993_cache_restore(codec);
 972
 973                         /* Tune DC servo configuration */
 974                         snd_soc_write(codec, 0x44, 3);
 975                         snd_soc_write(codec, 0x56, 3);
 976                         snd_soc_write(codec, 0x44, 0);
 977
 978                         /* Bring up VMID with fast soft start */
 979                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
 980                                             WM8993_STARTUP_BIAS_ENA |
 981                                             WM8993_VMID_BUF_ENA |
 982                                             WM8993_VMID_RAMP_MASK |
 983                                             WM8993_BIAS_SRC,
 984                                             WM8993_STARTUP_BIAS_ENA |
 985                                             WM8993_VMID_BUF_ENA |
 986                                             WM8993_VMID_RAMP_MASK |
 987                                             WM8993_BIAS_SRC);
 988
 989                         /* If either line output is single ended we
 990                          * need the VMID buffer */
 991                         if (!wm8993->pdata.lineout1_diff ||
 992                             !wm8993->pdata.lineout2_diff)
 993                                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
 994                                                  WM8993_LINEOUT_VMID_BUF_ENA,
 995                                                  WM8993_LINEOUT_VMID_BUF_ENA);
 996
 997                         /* VMID=2*40k */
 998                         snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
 999                                             WM8993_VMID_SEL_MASK |
1000                                             WM8993_BIAS_ENA,
1001                                             WM8993_BIAS_ENA | 0x2);
1002                         msleep(32);
1003
1004                         /* Switch to normal bias */
1005                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1006                                             WM8993_BIAS_SRC |
1007                                             WM8993_STARTUP_BIAS_ENA, 0);
1008                 }
1009
1010                 /* VMID=2*240k */
1011                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1012                                     WM8993_VMID_SEL_MASK, 0x4);
1013
1014                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1015                                     WM8993_TSHUT_ENA, 0);
1016                 break;
1017
1018         case SND_SOC_BIAS_OFF:
1019                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1020                                     WM8993_LINEOUT_VMID_BUF_ENA, 0);
1021
1022                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1023                                     WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1024                                     0);
1025
1026 #ifdef CONFIG_REGULATOR
1027                /* Post 2.6.34 we will be able to get a callback when
1028                 * the regulators are disabled which we can use but
1029                 * for now just assume that the power will be cut if
1030                 * the regulator API is in use.
1031                 */
1032                 codec->cache_sync = 1;
1033 #endif
1034
1035                 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1036                                        wm8993->supplies);
1037                 break;
1038         }
1039
1040         codec->bias_level = level;
1041
1042         return 0;
1043 }
1044
1045 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1046                              int clk_id, unsigned int freq, int dir)
1047 {
1048         struct snd_soc_codec *codec = codec_dai->codec;
1049         struct wm8993_priv *wm8993 = codec->private_data;
1050
1051         switch (clk_id) {
1052         case WM8993_SYSCLK_MCLK:
1053                 wm8993->mclk_rate = freq;
1054         case WM8993_SYSCLK_FLL:
1055                 wm8993->sysclk_source = clk_id;
1056                 break;
1057
1058         default:
1059                 return -EINVAL;
1060         }
1061
1062         return 0;
1063 }
1064
1065 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1066                               unsigned int fmt)
1067 {
1068         struct snd_soc_codec *codec = dai->codec;
1069         struct wm8993_priv *wm8993 = codec->private_data;
1070         unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1071         unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1072
1073         aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1074                   WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1075         aif4 &= ~WM8993_LRCLK_DIR;
1076
1077         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1078         case SND_SOC_DAIFMT_CBS_CFS:
1079                 wm8993->master = 0;
1080                 break;
1081         case SND_SOC_DAIFMT_CBS_CFM:
1082                 aif4 |= WM8993_LRCLK_DIR;
1083                 wm8993->master = 1;
1084                 break;
1085         case SND_SOC_DAIFMT_CBM_CFS:
1086                 aif1 |= WM8993_BCLK_DIR;
1087                 wm8993->master = 1;
1088                 break;
1089         case SND_SOC_DAIFMT_CBM_CFM:
1090                 aif1 |= WM8993_BCLK_DIR;
1091                 aif4 |= WM8993_LRCLK_DIR;
1092                 wm8993->master = 1;
1093                 break;
1094         default:
1095                 return -EINVAL;
1096         }
1097
1098         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1099         case SND_SOC_DAIFMT_DSP_B:
1100                 aif1 |= WM8993_AIF_LRCLK_INV;
1101         case SND_SOC_DAIFMT_DSP_A:
1102                 aif1 |= 0x18;
1103                 break;
1104         case SND_SOC_DAIFMT_I2S:
1105                 aif1 |= 0x10;
1106                 break;
1107         case SND_SOC_DAIFMT_RIGHT_J:
1108                 break;
1109         case SND_SOC_DAIFMT_LEFT_J:
1110                 aif1 |= 0x8;
1111                 break;
1112         default:
1113                 return -EINVAL;
1114         }
1115
1116         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1117         case SND_SOC_DAIFMT_DSP_A:
1118         case SND_SOC_DAIFMT_DSP_B:
1119                 /* frame inversion not valid for DSP modes */
1120                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1121                 case SND_SOC_DAIFMT_NB_NF:
1122                         break;
1123                 case SND_SOC_DAIFMT_IB_NF:
1124                         aif1 |= WM8993_AIF_BCLK_INV;
1125                         break;
1126                 default:
1127                         return -EINVAL;
1128                 }
1129                 break;
1130
1131         case SND_SOC_DAIFMT_I2S:
1132         case SND_SOC_DAIFMT_RIGHT_J:
1133         case SND_SOC_DAIFMT_LEFT_J:
1134                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1135                 case SND_SOC_DAIFMT_NB_NF:
1136                         break;
1137                 case SND_SOC_DAIFMT_IB_IF:
1138                         aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1139                         break;
1140                 case SND_SOC_DAIFMT_IB_NF:
1141                         aif1 |= WM8993_AIF_BCLK_INV;
1142                         break;
1143                 case SND_SOC_DAIFMT_NB_IF:
1144                         aif1 |= WM8993_AIF_LRCLK_INV;
1145                         break;
1146                 default:
1147                         return -EINVAL;
1148                 }
1149                 break;
1150         default:
1151                 return -EINVAL;
1152         }
1153
1154         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1155         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1156
1157         return 0;
1158 }
1159
1160 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1161                             struct snd_pcm_hw_params *params,
1162                             struct snd_soc_dai *dai)
1163 {
1164         struct snd_soc_codec *codec = dai->codec;
1165         struct wm8993_priv *wm8993 = codec->private_data;
1166         int ret, i, best, best_val, cur_val;
1167         unsigned int clocking1, clocking3, aif1, aif4;
1168
1169         clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1170         clocking1 &= ~WM8993_BCLK_DIV_MASK;
1171
1172         clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1173         clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1174
1175         aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1176         aif1 &= ~WM8993_AIF_WL_MASK;
1177
1178         aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1179         aif4 &= ~WM8993_LRCLK_RATE_MASK;
1180
1181         /* What BCLK do we need? */
1182         wm8993->fs = params_rate(params);
1183         wm8993->bclk = 2 * wm8993->fs;
1184         if (wm8993->tdm_slots) {
1185                 dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1186                         wm8993->tdm_slots, wm8993->tdm_width);
1187                 wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1188         } else {
1189                 switch (params_format(params)) {
1190                 case SNDRV_PCM_FORMAT_S16_LE:
1191                         wm8993->bclk *= 16;
1192                         break;
1193                 case SNDRV_PCM_FORMAT_S20_3LE:
1194                         wm8993->bclk *= 20;
1195                         aif1 |= 0x8;
1196                         break;
1197                 case SNDRV_PCM_FORMAT_S24_LE:
1198                         wm8993->bclk *= 24;
1199                         aif1 |= 0x10;
1200                         break;
1201                 case SNDRV_PCM_FORMAT_S32_LE:
1202                         wm8993->bclk *= 32;
1203                         aif1 |= 0x18;
1204                         break;
1205                 default:
1206                         return -EINVAL;
1207                 }
1208         }
1209
1210         dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1211
1212         ret = configure_clock(codec);
1213         if (ret != 0)
1214                 return ret;
1215
1216         /* Select nearest CLK_SYS_RATE */
1217         best = 0;
1218         best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1219                        - wm8993->fs);
1220         for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1221                 cur_val = abs((wm8993->sysclk_rate /
1222                                clk_sys_rates[i].ratio) - wm8993->fs);;
1223                 if (cur_val < best_val) {
1224                         best = i;
1225                         best_val = cur_val;
1226                 }
1227         }
1228         dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1229                 clk_sys_rates[best].ratio);
1230         clocking3 |= (clk_sys_rates[best].clk_sys_rate
1231                       << WM8993_CLK_SYS_RATE_SHIFT);
1232
1233         /* SAMPLE_RATE */
1234         best = 0;
1235         best_val = abs(wm8993->fs - sample_rates[0].rate);
1236         for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1237                 /* Closest match */
1238                 cur_val = abs(wm8993->fs - sample_rates[i].rate);
1239                 if (cur_val < best_val) {
1240                         best = i;
1241                         best_val = cur_val;
1242                 }
1243         }
1244         dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1245                 sample_rates[best].rate);
1246         clocking3 |= (sample_rates[best].sample_rate
1247                       << WM8993_SAMPLE_RATE_SHIFT);
1248
1249         /* BCLK_DIV */
1250         best = 0;
1251         best_val = INT_MAX;
1252         for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1253                 cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1254                         - wm8993->bclk;
1255                 if (cur_val < 0) /* Table is sorted */
1256                         break;
1257                 if (cur_val < best_val) {
1258                         best = i;
1259                         best_val = cur_val;
1260                 }
1261         }
1262         wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1263         dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1264                 bclk_divs[best].div, wm8993->bclk);
1265         clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1266
1267         /* LRCLK is a simple fraction of BCLK */
1268         dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1269         aif4 |= wm8993->bclk / wm8993->fs;
1270
1271         snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1272         snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1273         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1274         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1275
1276         /* ReTune Mobile? */
1277         if (wm8993->pdata.num_retune_configs) {
1278                 u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1279                 struct wm8993_retune_mobile_setting *s;
1280
1281                 best = 0;
1282                 best_val = abs(wm8993->pdata.retune_configs[0].rate
1283                                - wm8993->fs);
1284                 for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1285                         cur_val = abs(wm8993->pdata.retune_configs[i].rate
1286                                       - wm8993->fs);
1287                         if (cur_val < best_val) {
1288                                 best_val = cur_val;
1289                                 best = i;
1290                         }
1291                 }
1292                 s = &wm8993->pdata.retune_configs[best];
1293
1294                 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1295                         s->name, s->rate);
1296
1297                 /* Disable EQ while we reconfigure */
1298                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1299
1300                 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1301                         snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1302
1303                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1304         }
1305
1306         return 0;
1307 }
1308
1309 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1310 {
1311         struct snd_soc_codec *codec = codec_dai->codec;
1312         unsigned int reg;
1313
1314         reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1315
1316         if (mute)
1317                 reg |= WM8993_DAC_MUTE;
1318         else
1319                 reg &= ~WM8993_DAC_MUTE;
1320
1321         snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1322
1323         return 0;
1324 }
1325
1326 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1327                                unsigned int rx_mask, int slots, int slot_width)
1328 {
1329         struct snd_soc_codec *codec = dai->codec;
1330         struct wm8993_priv *wm8993 = codec->private_data;
1331         int aif1 = 0;
1332         int aif2 = 0;
1333
1334         /* Don't need to validate anything if we're turning off TDM */
1335         if (slots == 0) {
1336                 wm8993->tdm_slots = 0;
1337                 goto out;
1338         }
1339
1340         /* Note that we allow configurations we can't handle ourselves -
1341          * for example, we can generate clocks for slots 2 and up even if
1342          * we can't use those slots ourselves.
1343          */
1344         aif1 |= WM8993_AIFADC_TDM;
1345         aif2 |= WM8993_AIFDAC_TDM;
1346
1347         switch (rx_mask) {
1348         case 3:
1349                 break;
1350         case 0xc:
1351                 aif1 |= WM8993_AIFADC_TDM_CHAN;
1352                 break;
1353         default:
1354                 return -EINVAL;
1355         }
1356
1357
1358         switch (tx_mask) {
1359         case 3:
1360                 break;
1361         case 0xc:
1362                 aif2 |= WM8993_AIFDAC_TDM_CHAN;
1363                 break;
1364         default:
1365                 return -EINVAL;
1366         }
1367
1368 out:
1369         wm8993->tdm_width = slot_width;
1370         wm8993->tdm_slots = slots / 2;
1371
1372         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1373                             WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1374         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1375                             WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1376
1377         return 0;
1378 }
1379
1380 static struct snd_soc_dai_ops wm8993_ops = {
1381         .set_sysclk = wm8993_set_sysclk,
1382         .set_fmt = wm8993_set_dai_fmt,
1383         .hw_params = wm8993_hw_params,
1384         .digital_mute = wm8993_digital_mute,
1385         .set_pll = wm8993_set_fll,
1386         .set_tdm_slot = wm8993_set_tdm_slot,
1387 };
1388
1389 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1390
1391 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1392                         SNDRV_PCM_FMTBIT_S20_3LE |\
1393                         SNDRV_PCM_FMTBIT_S24_LE |\
1394                         SNDRV_PCM_FMTBIT_S32_LE)
1395
1396 struct snd_soc_dai wm8993_dai = {
1397         .name = "WM8993",
1398         .playback = {
1399                 .stream_name = "Playback",
1400                 .channels_min = 1,
1401                 .channels_max = 2,
1402                 .rates = WM8993_RATES,
1403                 .formats = WM8993_FORMATS,
1404         },
1405         .capture = {
1406                  .stream_name = "Capture",
1407                  .channels_min = 1,
1408                  .channels_max = 2,
1409                  .rates = WM8993_RATES,
1410                  .formats = WM8993_FORMATS,
1411          },
1412         .ops = &wm8993_ops,
1413         .symmetric_rates = 1,
1414 };
1415 EXPORT_SYMBOL_GPL(wm8993_dai);
1416
1417 static struct snd_soc_codec *wm8993_codec;
1418
1419 static int wm8993_probe(struct platform_device *pdev)
1420 {
1421         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1422         struct snd_soc_codec *codec;
1423         struct wm8993_priv *wm8993;
1424         int ret = 0;
1425
1426         if (!wm8993_codec) {
1427                 dev_err(&pdev->dev, "I2C device not yet probed\n");
1428                 goto err;
1429         }
1430
1431         socdev->card->codec = wm8993_codec;
1432         codec = wm8993_codec;
1433         wm8993 = codec->private_data;
1434
1435         ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
1436         if (ret < 0) {
1437                 dev_err(codec->dev, "failed to create pcms\n");
1438                 goto err;
1439         }
1440
1441         snd_soc_add_controls(codec, wm8993_snd_controls,
1442                              ARRAY_SIZE(wm8993_snd_controls));
1443         if (wm8993->pdata.num_retune_configs != 0) {
1444                 dev_dbg(codec->dev, "Using ReTune Mobile\n");
1445         } else {
1446                 dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1447                 snd_soc_add_controls(codec, wm8993_eq_controls,
1448                                      ARRAY_SIZE(wm8993_eq_controls));
1449         }
1450
1451         snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
1452                                   ARRAY_SIZE(wm8993_dapm_widgets));
1453         wm_hubs_add_analogue_controls(codec);
1454
1455         snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
1456         wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1457                                     wm8993->pdata.lineout2_diff);
1458
1459         return ret;
1460
1461 err:
1462         return ret;
1463 }
1464
1465 static int wm8993_remove(struct platform_device *pdev)
1466 {
1467         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1468
1469         snd_soc_free_pcms(socdev);
1470         snd_soc_dapm_free(socdev);
1471
1472         return 0;
1473 }
1474
1475 #ifdef CONFIG_PM
1476 static int wm8993_suspend(struct platform_device *pdev, pm_message_t state)
1477 {
1478         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1479         struct snd_soc_codec *codec = socdev->card->codec;
1480         struct wm8993_priv *wm8993 = codec->private_data;
1481         int fll_fout = wm8993->fll_fout;
1482         int fll_fref  = wm8993->fll_fref;
1483         int ret;
1484
1485         /* Stop the FLL in an orderly fashion */
1486         ret = wm8993_set_fll(codec->dai, 0, 0, 0, 0);
1487         if (ret != 0) {
1488                 dev_err(&pdev->dev, "Failed to stop FLL\n");
1489                 return ret;
1490         }
1491
1492         wm8993->fll_fout = fll_fout;
1493         wm8993->fll_fref = fll_fref;
1494
1495         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1496
1497         return 0;
1498 }
1499
1500 static int wm8993_resume(struct platform_device *pdev)
1501 {
1502         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1503         struct snd_soc_codec *codec = socdev->card->codec;
1504         struct wm8993_priv *wm8993 = codec->private_data;
1505         int ret;
1506
1507         wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1508
1509         /* Restart the FLL? */
1510         if (wm8993->fll_fout) {
1511                 int fll_fout = wm8993->fll_fout;
1512                 int fll_fref  = wm8993->fll_fref;
1513
1514                 wm8993->fll_fref = 0;
1515                 wm8993->fll_fout = 0;
1516
1517                 ret = wm8993_set_fll(codec->dai, 0, wm8993->fll_src,
1518                                      fll_fref, fll_fout);
1519                 if (ret != 0)
1520                         dev_err(codec->dev, "Failed to restart FLL\n");
1521         }
1522
1523         return 0;
1524 }
1525 #else
1526 #define wm8993_suspend NULL
1527 #define wm8993_resume NULL
1528 #endif
1529
1530 struct snd_soc_codec_device soc_codec_dev_wm8993 = {
1531         .probe =        wm8993_probe,
1532         .remove =       wm8993_remove,
1533         .suspend =      wm8993_suspend,
1534         .resume =       wm8993_resume,
1535 };
1536 EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
1537
1538 static int wm8993_i2c_probe(struct i2c_client *i2c,
1539                             const struct i2c_device_id *id)
1540 {
1541         struct wm8993_priv *wm8993;
1542         struct snd_soc_codec *codec;
1543         unsigned int val;
1544         int ret;
1545         int i;
1546
1547         if (wm8993_codec) {
1548                 dev_err(&i2c->dev, "A WM8993 is already registered\n");
1549                 return -EINVAL;
1550         }
1551
1552         wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
1553         if (wm8993 == NULL)
1554                 return -ENOMEM;
1555
1556         codec = &wm8993->codec;
1557         if (i2c->dev.platform_data)
1558                 memcpy(&wm8993->pdata, i2c->dev.platform_data,
1559                        sizeof(wm8993->pdata));
1560
1561         mutex_init(&codec->mutex);
1562         INIT_LIST_HEAD(&codec->dapm_widgets);
1563         INIT_LIST_HEAD(&codec->dapm_paths);
1564
1565         codec->name = "WM8993";
1566         codec->volatile_register = wm8993_volatile;
1567         codec->reg_cache = wm8993->reg_cache;
1568         codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
1569         codec->bias_level = SND_SOC_BIAS_OFF;
1570         codec->set_bias_level = wm8993_set_bias_level;
1571         codec->dai = &wm8993_dai;
1572         codec->num_dai = 1;
1573         codec->private_data = wm8993;
1574
1575         wm8993->hubs_data.hp_startup_mode = 1;
1576         wm8993->hubs_data.dcs_codes = -2;
1577
1578         memcpy(wm8993->reg_cache, wm8993_reg_defaults,
1579                sizeof(wm8993->reg_cache));
1580
1581         ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
1582         if (ret != 0) {
1583                 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1584                 goto err;
1585         }
1586
1587         i2c_set_clientdata(i2c, wm8993);
1588         codec->control_data = i2c;
1589         wm8993_codec = codec;
1590
1591         codec->dev = &i2c->dev;
1592
1593         for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1594                 wm8993->supplies[i].supply = wm8993_supply_names[i];
1595
1596         ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
1597                                  wm8993->supplies);
1598         if (ret != 0) {
1599                 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1600                 goto err;
1601         }
1602
1603         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1604                                     wm8993->supplies);
1605         if (ret != 0) {
1606                 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
1607                 goto err_get;
1608         }
1609
1610         val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
1611         if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
1612                 dev_err(codec->dev, "Invalid ID register value %x\n", val);
1613                 ret = -EINVAL;
1614                 goto err_enable;
1615         }
1616
1617         ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
1618         if (ret != 0)
1619                 goto err_enable;
1620
1621         codec->cache_only = 1;
1622
1623         /* By default we're using the output mixers */
1624         wm8993->class_w_users = 2;
1625
1626         /* Latch volume update bits and default ZC on */
1627         snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1628                             WM8993_DAC_VU, WM8993_DAC_VU);
1629         snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1630                             WM8993_ADC_VU, WM8993_ADC_VU);
1631
1632         /* Manualy manage the HPOUT sequencing for independent stereo
1633          * control. */
1634         snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1635                             WM8993_HPOUT1_AUTO_PU, 0);
1636
1637         /* Use automatic clock configuration */
1638         snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1639
1640         wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1641                                       wm8993->pdata.lineout2_diff,
1642                                       wm8993->pdata.lineout1fb,
1643                                       wm8993->pdata.lineout2fb,
1644                                       wm8993->pdata.jd_scthr,
1645                                       wm8993->pdata.jd_thr,
1646                                       wm8993->pdata.micbias1_lvl,
1647                                       wm8993->pdata.micbias2_lvl);
1648
1649         ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1650         if (ret != 0)
1651                 goto err_enable;
1652
1653         wm8993_dai.dev = codec->dev;
1654
1655         ret = snd_soc_register_dai(&wm8993_dai);
1656         if (ret != 0)
1657                 goto err_bias;
1658
1659         ret = snd_soc_register_codec(codec);
1660
1661         return 0;
1662
1663 err_bias:
1664         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1665 err_enable:
1666         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1667 err_get:
1668         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1669 err:
1670         wm8993_codec = NULL;
1671         kfree(wm8993);
1672         return ret;
1673 }
1674
1675 static int wm8993_i2c_remove(struct i2c_client *client)
1676 {
1677         struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
1678
1679         snd_soc_unregister_codec(&wm8993->codec);
1680         snd_soc_unregister_dai(&wm8993_dai);
1681
1682         wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
1683         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1684         kfree(wm8993);
1685
1686         return 0;
1687 }
1688
1689 static const struct i2c_device_id wm8993_i2c_id[] = {
1690         { "wm8993", 0 },
1691         { }
1692 };
1693 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1694
1695 static struct i2c_driver wm8993_i2c_driver = {
1696         .driver = {
1697                 .name = "WM8993",
1698                 .owner = THIS_MODULE,
1699         },
1700         .probe = wm8993_i2c_probe,
1701         .remove = wm8993_i2c_remove,
1702         .id_table = wm8993_i2c_id,
1703 };
1704
1705
1706 static int __init wm8993_modinit(void)
1707 {
1708         int ret;
1709
1710         ret = i2c_add_driver(&wm8993_i2c_driver);
1711         if (ret != 0)
1712                 pr_err("WM8993: Unable to register I2C driver: %d\n", ret);
1713
1714         return ret;
1715 }
1716 module_init(wm8993_modinit);
1717
1718 static void __exit wm8993_exit(void)
1719 {
1720         i2c_del_driver(&wm8993_i2c_driver);
1721 }
1722 module_exit(wm8993_exit);
1723
1724
1725 MODULE_DESCRIPTION("ASoC WM8993 driver");
1726 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1727 MODULE_LICENSE("GPL");