2 * wm9081.c -- WM9081 ALSA SoC Audio driver
6 * Copyright 2009 Wolfson Microelectronics plc
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
19 #include <linux/i2c.h>
20 #include <linux/platform_device.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/soc.h>
26 #include <sound/initval.h>
27 #include <sound/tlv.h>
29 #include <sound/wm9081.h>
32 static u16 wm9081_reg_defaults[] = {
33 0x0000, /* R0 - Software Reset */
35 0x00B9, /* R2 - Analogue Lineout */
36 0x00B9, /* R3 - Analogue Speaker PGA */
37 0x0001, /* R4 - VMID Control */
38 0x0068, /* R5 - Bias Control 1 */
40 0x0000, /* R7 - Analogue Mixer */
41 0x0000, /* R8 - Anti Pop Control */
42 0x01DB, /* R9 - Analogue Speaker 1 */
43 0x0018, /* R10 - Analogue Speaker 2 */
44 0x0180, /* R11 - Power Management */
45 0x0000, /* R12 - Clock Control 1 */
46 0x0038, /* R13 - Clock Control 2 */
47 0x4000, /* R14 - Clock Control 3 */
49 0x0000, /* R16 - FLL Control 1 */
50 0x0200, /* R17 - FLL Control 2 */
51 0x0000, /* R18 - FLL Control 3 */
52 0x0204, /* R19 - FLL Control 4 */
53 0x0000, /* R20 - FLL Control 5 */
55 0x0000, /* R22 - Audio Interface 1 */
56 0x0002, /* R23 - Audio Interface 2 */
57 0x0008, /* R24 - Audio Interface 3 */
58 0x0022, /* R25 - Audio Interface 4 */
59 0x0000, /* R26 - Interrupt Status */
60 0x0006, /* R27 - Interrupt Status Mask */
61 0x0000, /* R28 - Interrupt Polarity */
62 0x0000, /* R29 - Interrupt Control */
63 0x00C0, /* R30 - DAC Digital 1 */
64 0x0008, /* R31 - DAC Digital 2 */
65 0x09AF, /* R32 - DRC 1 */
66 0x4201, /* R33 - DRC 2 */
67 0x0000, /* R34 - DRC 3 */
68 0x0000, /* R35 - DRC 4 */
71 0x0000, /* R38 - Write Sequencer 1 */
72 0x0000, /* R39 - Write Sequencer 2 */
73 0x0002, /* R40 - MW Slave 1 */
75 0x0000, /* R42 - EQ 1 */
76 0x0000, /* R43 - EQ 2 */
77 0x0FCA, /* R44 - EQ 3 */
78 0x0400, /* R45 - EQ 4 */
79 0x00B8, /* R46 - EQ 5 */
80 0x1EB5, /* R47 - EQ 6 */
81 0xF145, /* R48 - EQ 7 */
82 0x0B75, /* R49 - EQ 8 */
83 0x01C5, /* R50 - EQ 9 */
84 0x169E, /* R51 - EQ 10 */
85 0xF829, /* R52 - EQ 11 */
86 0x07AD, /* R53 - EQ 12 */
87 0x1103, /* R54 - EQ 13 */
88 0x1C58, /* R55 - EQ 14 */
89 0xF373, /* R56 - EQ 15 */
90 0x0A54, /* R57 - EQ 16 */
91 0x0558, /* R58 - EQ 17 */
92 0x0564, /* R59 - EQ 18 */
93 0x0559, /* R60 - EQ 19 */
94 0x4000, /* R61 - EQ 20 */
100 } clk_sys_rates[] = {
131 int div; /* *10 due to .5s */
158 enum snd_soc_control_type control_type;
169 struct wm9081_retune_mobile_config *retune;
172 static int wm9081_volatile_register(unsigned int reg)
175 case WM9081_SOFTWARE_RESET:
182 static int wm9081_reset(struct snd_soc_codec *codec)
184 return snd_soc_write(codec, WM9081_SOFTWARE_RESET, 0);
187 static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
188 static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
189 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
190 static unsigned int drc_max_tlv[] = {
191 TLV_DB_RANGE_HEAD(4),
192 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
193 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
194 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
195 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
197 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
198 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
200 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
202 static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
203 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
204 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
206 static const char *drc_high_text[] = {
215 static const struct soc_enum drc_high =
216 SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text);
218 static const char *drc_low_text[] = {
226 static const struct soc_enum drc_low =
227 SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text);
229 static const char *drc_atk_text[] = {
244 static const struct soc_enum drc_atk =
245 SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text);
247 static const char *drc_dcy_text[] = {
259 static const struct soc_enum drc_dcy =
260 SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text);
262 static const char *drc_qr_dcy_text[] = {
268 static const struct soc_enum drc_qr_dcy =
269 SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text);
271 static const char *dac_deemph_text[] = {
278 static const struct soc_enum dac_deemph =
279 SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text);
281 static const char *speaker_mode_text[] = {
286 static const struct soc_enum speaker_mode =
287 SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text);
289 static int speaker_mode_get(struct snd_kcontrol *kcontrol,
290 struct snd_ctl_elem_value *ucontrol)
292 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
295 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
296 if (reg & WM9081_SPK_MODE)
297 ucontrol->value.integer.value[0] = 1;
299 ucontrol->value.integer.value[0] = 0;
305 * Stop any attempts to change speaker mode while the speaker is enabled.
307 * We also have some special anti-pop controls dependant on speaker
308 * mode which must be changed along with the mode.
310 static int speaker_mode_put(struct snd_kcontrol *kcontrol,
311 struct snd_ctl_elem_value *ucontrol)
313 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
314 unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
315 unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
317 /* Are we changing anything? */
318 if (ucontrol->value.integer.value[0] ==
319 ((reg2 & WM9081_SPK_MODE) != 0))
322 /* Don't try to change modes while enabled */
323 if (reg_pwr & WM9081_SPK_ENA)
326 if (ucontrol->value.integer.value[0]) {
328 reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
329 reg2 |= WM9081_SPK_MODE;
332 reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
333 reg2 &= ~WM9081_SPK_MODE;
336 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
341 static const struct snd_kcontrol_new wm9081_snd_controls[] = {
342 SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
343 SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
345 SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
347 SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
348 SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
349 SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
351 SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
352 SOC_ENUM("DRC High Slope", drc_high),
353 SOC_ENUM("DRC Low Slope", drc_low),
354 SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
355 SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
356 SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
357 SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
358 SOC_ENUM("DRC Attack", drc_atk),
359 SOC_ENUM("DRC Decay", drc_dcy),
360 SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
361 SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
362 SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
363 SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
365 SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
367 SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
368 SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
369 SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
370 SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
371 SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
373 SOC_ENUM("DAC Deemphasis", dac_deemph),
374 SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
377 static const struct snd_kcontrol_new wm9081_eq_controls[] = {
378 SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
379 SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
380 SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
381 SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
382 SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
385 static const struct snd_kcontrol_new mixer[] = {
386 SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
387 SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
388 SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
391 static int speaker_event(struct snd_soc_dapm_widget *w,
392 struct snd_kcontrol *kcontrol, int event)
394 struct snd_soc_codec *codec = w->codec;
395 unsigned int reg = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
398 case SND_SOC_DAPM_POST_PMU:
399 reg |= WM9081_SPK_ENA;
402 case SND_SOC_DAPM_PRE_PMD:
403 reg &= ~WM9081_SPK_ENA;
407 snd_soc_write(codec, WM9081_POWER_MANAGEMENT, reg);
420 /* The size in bits of the FLL divide multiplied by 10
421 * to allow rounding later */
422 #define FIXED_FLL_SIZE ((1 << 16) * 10)
431 { 64000, 128000, 3, 8 },
432 { 128000, 256000, 2, 4 },
433 { 256000, 1000000, 1, 2 },
434 { 1000000, 13500000, 0, 1 },
437 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
441 unsigned int K, Ndiv, Nmod, target;
445 /* Fref must be <=13.5MHz */
447 while ((Fref / div) > 13500000) {
451 pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
456 fll_div->fll_clk_ref_div = div / 2;
458 pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
460 /* Apply the division for our remaining calculations */
463 /* Fvco should be 90-100MHz; don't check the upper bound */
466 while (target < 90000000) {
470 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
475 fll_div->fll_outdiv = div;
477 pr_debug("Fvco=%dHz\n", target);
479 /* Find an appropraite FLL_FRATIO and factor it out of the target */
480 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
481 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
482 fll_div->fll_fratio = fll_fratios[i].fll_fratio;
483 target /= fll_fratios[i].ratio;
487 if (i == ARRAY_SIZE(fll_fratios)) {
488 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
492 /* Now, calculate N.K */
493 Ndiv = target / Fref;
496 Nmod = target % Fref;
497 pr_debug("Nmod=%d\n", Nmod);
499 /* Calculate fractional part - scale up so we can round. */
500 Kpart = FIXED_FLL_SIZE * (long long)Nmod;
504 K = Kpart & 0xFFFFFFFF;
509 /* Move down to proper range now rounding is done */
512 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
513 fll_div->n, fll_div->k,
514 fll_div->fll_fratio, fll_div->fll_outdiv,
515 fll_div->fll_clk_ref_div);
520 static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id,
521 unsigned int Fref, unsigned int Fout)
523 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
524 u16 reg1, reg4, reg5;
525 struct _fll_div fll_div;
530 if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
533 /* Disable the FLL */
535 dev_dbg(codec->dev, "FLL disabled\n");
536 wm9081->fll_fref = 0;
537 wm9081->fll_fout = 0;
542 ret = fll_factors(&fll_div, Fref, Fout);
546 reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5);
547 reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
550 case WM9081_SYSCLK_FLL_MCLK:
555 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
559 /* Disable CLK_SYS while we reconfigure */
560 clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
561 if (clk_sys_reg & WM9081_CLK_SYS_ENA)
562 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3,
563 clk_sys_reg & ~WM9081_CLK_SYS_ENA);
565 /* Any FLL configuration change requires that the FLL be
567 reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1);
568 reg1 &= ~WM9081_FLL_ENA;
569 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
571 /* Apply the configuration */
573 reg1 |= WM9081_FLL_FRAC_MASK;
575 reg1 &= ~WM9081_FLL_FRAC_MASK;
576 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
578 snd_soc_write(codec, WM9081_FLL_CONTROL_2,
579 (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
580 (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
581 snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
583 reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4);
584 reg4 &= ~WM9081_FLL_N_MASK;
585 reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
586 snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4);
588 reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
589 reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
590 snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5);
592 /* Set gain to the recommended value */
593 snd_soc_update_bits(codec, WM9081_FLL_CONTROL_4,
594 WM9081_FLL_GAIN_MASK, 0);
597 snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
599 /* Then bring CLK_SYS up again if it was disabled */
600 if (clk_sys_reg & WM9081_CLK_SYS_ENA)
601 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
603 dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
605 wm9081->fll_fref = Fref;
606 wm9081->fll_fout = Fout;
611 static int configure_clock(struct snd_soc_codec *codec)
613 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
614 int new_sysclk, i, target;
620 switch (wm9081->sysclk_source) {
621 case WM9081_SYSCLK_MCLK:
622 if (wm9081->mclk_rate > 12225000) {
624 wm9081->sysclk_rate = wm9081->mclk_rate / 2;
626 wm9081->sysclk_rate = wm9081->mclk_rate;
628 wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0);
631 case WM9081_SYSCLK_FLL_MCLK:
632 /* If we have a sample rate calculate a CLK_SYS that
633 * gives us a suitable DAC configuration, plus BCLK.
634 * Ideally we would check to see if we can clock
635 * directly from MCLK and only use the FLL if this is
636 * not the case, though care must be taken with free
639 if (wm9081->master && wm9081->bclk) {
640 /* Make sure we can generate CLK_SYS and BCLK
641 * and that we've got 3MHz for optimal
643 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
644 target = wm9081->fs * clk_sys_rates[i].ratio;
646 if (target >= wm9081->bclk &&
651 if (i == ARRAY_SIZE(clk_sys_rates))
654 } else if (wm9081->fs) {
655 for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
656 new_sysclk = clk_sys_rates[i].ratio
658 if (new_sysclk > 3000000)
662 if (i == ARRAY_SIZE(clk_sys_rates))
666 new_sysclk = 12288000;
669 ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK,
670 wm9081->mclk_rate, new_sysclk);
672 wm9081->sysclk_rate = new_sysclk;
674 /* Switch SYSCLK over to FLL */
677 wm9081->sysclk_rate = wm9081->mclk_rate;
685 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1);
687 reg |= WM9081_MCLKDIV2;
689 reg &= ~WM9081_MCLKDIV2;
690 snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg);
692 reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
694 reg |= WM9081_CLK_SRC_SEL;
696 reg &= ~WM9081_CLK_SRC_SEL;
697 snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg);
699 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
704 static int clk_sys_event(struct snd_soc_dapm_widget *w,
705 struct snd_kcontrol *kcontrol, int event)
707 struct snd_soc_codec *codec = w->codec;
708 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
710 /* This should be done on init() for bypass paths */
711 switch (wm9081->sysclk_source) {
712 case WM9081_SYSCLK_MCLK:
713 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
715 case WM9081_SYSCLK_FLL_MCLK:
716 dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n",
720 dev_err(codec->dev, "System clock not configured\n");
725 case SND_SOC_DAPM_PRE_PMU:
726 configure_clock(codec);
729 case SND_SOC_DAPM_POST_PMD:
730 /* Disable the FLL if it's running */
731 wm9081_set_fll(codec, 0, 0, 0);
738 static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
739 SND_SOC_DAPM_INPUT("IN1"),
740 SND_SOC_DAPM_INPUT("IN2"),
742 SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0),
744 SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
745 mixer, ARRAY_SIZE(mixer)),
747 SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
749 SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0,
751 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
753 SND_SOC_DAPM_OUTPUT("LINEOUT"),
754 SND_SOC_DAPM_OUTPUT("SPKN"),
755 SND_SOC_DAPM_OUTPUT("SPKP"),
757 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
758 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
759 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
760 SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
764 static const struct snd_soc_dapm_route audio_paths[] = {
765 { "DAC", NULL, "CLK_SYS" },
766 { "DAC", NULL, "CLK_DSP" },
768 { "Mixer", "IN1 Switch", "IN1" },
769 { "Mixer", "IN2 Switch", "IN2" },
770 { "Mixer", "Playback Switch", "DAC" },
772 { "LINEOUT PGA", NULL, "Mixer" },
773 { "LINEOUT PGA", NULL, "TOCLK" },
774 { "LINEOUT PGA", NULL, "CLK_SYS" },
776 { "LINEOUT", NULL, "LINEOUT PGA" },
778 { "Speaker PGA", NULL, "Mixer" },
779 { "Speaker PGA", NULL, "TOCLK" },
780 { "Speaker PGA", NULL, "CLK_SYS" },
782 { "SPKN", NULL, "Speaker PGA" },
783 { "SPKP", NULL, "Speaker PGA" },
786 static int wm9081_set_bias_level(struct snd_soc_codec *codec,
787 enum snd_soc_bias_level level)
792 case SND_SOC_BIAS_ON:
795 case SND_SOC_BIAS_PREPARE:
797 reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
798 reg &= ~WM9081_VMID_SEL_MASK;
800 snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
802 /* Normal bias current */
803 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
804 reg &= ~WM9081_STBY_BIAS_ENA;
805 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
808 case SND_SOC_BIAS_STANDBY:
809 /* Initial cold start */
810 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
811 /* Disable LINEOUT discharge */
812 reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
813 reg &= ~WM9081_LINEOUT_DISCH;
814 snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
816 /* Select startup bias source */
817 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
818 reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
819 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
821 /* VMID 2*4k; Soft VMID ramp enable */
822 reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
823 reg |= WM9081_VMID_RAMP | 0x6;
824 snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
828 /* Normal bias enable & soft start off */
829 reg |= WM9081_BIAS_ENA;
830 reg &= ~WM9081_VMID_RAMP;
831 snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
833 /* Standard bias source */
834 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
835 reg &= ~WM9081_BIAS_SRC;
836 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
840 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
841 reg &= ~WM9081_VMID_SEL_MASK;
843 snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
845 /* Standby bias current on */
846 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
847 reg |= WM9081_STBY_BIAS_ENA;
848 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
851 case SND_SOC_BIAS_OFF:
852 /* Startup bias source */
853 reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
854 reg |= WM9081_BIAS_SRC;
855 snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
857 /* Disable VMID and biases with soft ramping */
858 reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
859 reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
860 reg |= WM9081_VMID_RAMP;
861 snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
863 /* Actively discharge LINEOUT */
864 reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
865 reg |= WM9081_LINEOUT_DISCH;
866 snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
870 codec->dapm.bias_level = level;
875 static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
878 struct snd_soc_codec *codec = dai->codec;
879 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
880 unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
882 aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
883 WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
885 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
886 case SND_SOC_DAIFMT_CBS_CFS:
889 case SND_SOC_DAIFMT_CBS_CFM:
890 aif2 |= WM9081_LRCLK_DIR;
893 case SND_SOC_DAIFMT_CBM_CFS:
894 aif2 |= WM9081_BCLK_DIR;
897 case SND_SOC_DAIFMT_CBM_CFM:
898 aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
905 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
906 case SND_SOC_DAIFMT_DSP_B:
907 aif2 |= WM9081_AIF_LRCLK_INV;
908 case SND_SOC_DAIFMT_DSP_A:
911 case SND_SOC_DAIFMT_I2S:
914 case SND_SOC_DAIFMT_RIGHT_J:
916 case SND_SOC_DAIFMT_LEFT_J:
923 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
924 case SND_SOC_DAIFMT_DSP_A:
925 case SND_SOC_DAIFMT_DSP_B:
926 /* frame inversion not valid for DSP modes */
927 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
928 case SND_SOC_DAIFMT_NB_NF:
930 case SND_SOC_DAIFMT_IB_NF:
931 aif2 |= WM9081_AIF_BCLK_INV;
938 case SND_SOC_DAIFMT_I2S:
939 case SND_SOC_DAIFMT_RIGHT_J:
940 case SND_SOC_DAIFMT_LEFT_J:
941 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
942 case SND_SOC_DAIFMT_NB_NF:
944 case SND_SOC_DAIFMT_IB_IF:
945 aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
947 case SND_SOC_DAIFMT_IB_NF:
948 aif2 |= WM9081_AIF_BCLK_INV;
950 case SND_SOC_DAIFMT_NB_IF:
951 aif2 |= WM9081_AIF_LRCLK_INV;
961 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
966 static int wm9081_hw_params(struct snd_pcm_substream *substream,
967 struct snd_pcm_hw_params *params,
968 struct snd_soc_dai *dai)
970 struct snd_soc_codec *codec = dai->codec;
971 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
972 int ret, i, best, best_val, cur_val;
973 unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
975 clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2);
976 clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
978 aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
980 aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
981 aif2 &= ~WM9081_AIF_WL_MASK;
983 aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3);
984 aif3 &= ~WM9081_BCLK_DIV_MASK;
986 aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4);
987 aif4 &= ~WM9081_LRCLK_RATE_MASK;
989 wm9081->fs = params_rate(params);
991 if (wm9081->tdm_width) {
992 /* If TDM is set up then that fixes our BCLK. */
993 int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
994 WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
996 wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots;
998 /* Otherwise work out a BCLK from the sample size */
999 wm9081->bclk = 2 * wm9081->fs;
1001 switch (params_format(params)) {
1002 case SNDRV_PCM_FORMAT_S16_LE:
1005 case SNDRV_PCM_FORMAT_S20_3LE:
1009 case SNDRV_PCM_FORMAT_S24_LE:
1013 case SNDRV_PCM_FORMAT_S32_LE:
1022 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
1024 ret = configure_clock(codec);
1028 /* Select nearest CLK_SYS_RATE */
1030 best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
1032 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1033 cur_val = abs((wm9081->sysclk_rate /
1034 clk_sys_rates[i].ratio) - wm9081->fs);
1035 if (cur_val < best_val) {
1040 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1041 clk_sys_rates[best].ratio);
1042 clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
1043 << WM9081_CLK_SYS_RATE_SHIFT);
1047 best_val = abs(wm9081->fs - sample_rates[0].rate);
1048 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1050 cur_val = abs(wm9081->fs - sample_rates[i].rate);
1051 if (cur_val < best_val) {
1056 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1057 sample_rates[best].rate);
1058 clk_ctrl2 |= (sample_rates[best].sample_rate
1059 << WM9081_SAMPLE_RATE_SHIFT);
1064 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1065 cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
1067 if (cur_val < 0) /* Table is sorted */
1069 if (cur_val < best_val) {
1074 wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
1075 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1076 bclk_divs[best].div, wm9081->bclk);
1077 aif3 |= bclk_divs[best].bclk_div;
1079 /* LRCLK is a simple fraction of BCLK */
1080 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
1081 aif4 |= wm9081->bclk / wm9081->fs;
1083 /* Apply a ReTune Mobile configuration if it's in use */
1084 if (wm9081->retune) {
1085 struct wm9081_retune_mobile_config *retune = wm9081->retune;
1086 struct wm9081_retune_mobile_setting *s;
1090 best_val = abs(retune->configs[0].rate - wm9081->fs);
1091 for (i = 0; i < retune->num_configs; i++) {
1092 cur_val = abs(retune->configs[i].rate - wm9081->fs);
1093 if (cur_val < best_val) {
1098 s = &retune->configs[best];
1100 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1103 /* If the EQ is enabled then disable it while we write out */
1104 eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
1105 if (eq1 & WM9081_EQ_ENA)
1106 snd_soc_write(codec, WM9081_EQ_1, 0);
1108 /* Write out the other values */
1109 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1110 snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]);
1112 eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
1113 snd_soc_write(codec, WM9081_EQ_1, eq1);
1116 snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
1117 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
1118 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
1119 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
1124 static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1126 struct snd_soc_codec *codec = codec_dai->codec;
1129 reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2);
1132 reg |= WM9081_DAC_MUTE;
1134 reg &= ~WM9081_DAC_MUTE;
1136 snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg);
1141 static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai,
1142 int clk_id, unsigned int freq, int dir)
1144 struct snd_soc_codec *codec = codec_dai->codec;
1145 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
1148 case WM9081_SYSCLK_MCLK:
1149 case WM9081_SYSCLK_FLL_MCLK:
1150 wm9081->sysclk_source = clk_id;
1151 wm9081->mclk_rate = freq;
1161 static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
1162 unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
1164 struct snd_soc_codec *codec = dai->codec;
1165 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
1166 unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
1168 aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
1170 if (slots < 0 || slots > 4)
1173 wm9081->tdm_width = slot_width;
1178 aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
1196 snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
1201 #define WM9081_RATES SNDRV_PCM_RATE_8000_96000
1203 #define WM9081_FORMATS \
1204 (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
1205 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
1207 static struct snd_soc_dai_ops wm9081_dai_ops = {
1208 .hw_params = wm9081_hw_params,
1209 .set_sysclk = wm9081_set_sysclk,
1210 .set_fmt = wm9081_set_dai_fmt,
1211 .digital_mute = wm9081_digital_mute,
1212 .set_tdm_slot = wm9081_set_tdm_slot,
1215 /* We report two channels because the CODEC processes a stereo signal, even
1216 * though it is only capable of handling a mono output.
1218 static struct snd_soc_dai_driver wm9081_dai = {
1219 .name = "wm9081-hifi",
1221 .stream_name = "HiFi Playback",
1224 .rates = WM9081_RATES,
1225 .formats = WM9081_FORMATS,
1227 .ops = &wm9081_dai_ops,
1230 static int wm9081_probe(struct snd_soc_codec *codec)
1232 struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
1233 struct snd_soc_dapm_context *dapm = &codec->dapm;
1237 codec->control_data = wm9081->control_data;
1238 ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm9081->control_type);
1240 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1244 reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET);
1245 if (reg != 0x9081) {
1246 dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
1251 ret = wm9081_reset(codec);
1253 dev_err(codec->dev, "Failed to issue reset\n");
1257 wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1259 /* Enable zero cross by default */
1260 reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
1261 snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
1262 reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
1263 snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
1264 reg | WM9081_SPKPGAZC);
1266 snd_soc_add_controls(codec, wm9081_snd_controls,
1267 ARRAY_SIZE(wm9081_snd_controls));
1268 if (!wm9081->retune) {
1270 "No ReTune Mobile data, using normal EQ\n");
1271 snd_soc_add_controls(codec, wm9081_eq_controls,
1272 ARRAY_SIZE(wm9081_eq_controls));
1275 snd_soc_dapm_new_controls(dapm, wm9081_dapm_widgets,
1276 ARRAY_SIZE(wm9081_dapm_widgets));
1277 snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
1282 static int wm9081_remove(struct snd_soc_codec *codec)
1284 wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
1289 static int wm9081_suspend(struct snd_soc_codec *codec, pm_message_t state)
1291 wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
1296 static int wm9081_resume(struct snd_soc_codec *codec)
1298 u16 *reg_cache = codec->reg_cache;
1301 for (i = 0; i < codec->driver->reg_cache_size; i++) {
1302 if (i == WM9081_SOFTWARE_RESET)
1305 snd_soc_write(codec, i, reg_cache[i]);
1308 wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1313 #define wm9081_suspend NULL
1314 #define wm9081_resume NULL
1317 static struct snd_soc_codec_driver soc_codec_dev_wm9081 = {
1318 .probe = wm9081_probe,
1319 .remove = wm9081_remove,
1320 .suspend = wm9081_suspend,
1321 .resume = wm9081_resume,
1322 .set_bias_level = wm9081_set_bias_level,
1323 .reg_cache_size = ARRAY_SIZE(wm9081_reg_defaults),
1324 .reg_word_size = sizeof(u16),
1325 .reg_cache_default = wm9081_reg_defaults,
1326 .volatile_register = wm9081_volatile_register,
1329 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1330 static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
1331 const struct i2c_device_id *id)
1333 struct wm9081_priv *wm9081;
1336 wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL);
1340 i2c_set_clientdata(i2c, wm9081);
1341 wm9081->control_type = SND_SOC_I2C;
1342 wm9081->control_data = i2c;
1344 ret = snd_soc_register_codec(&i2c->dev,
1345 &soc_codec_dev_wm9081, &wm9081_dai, 1);
1351 static __devexit int wm9081_i2c_remove(struct i2c_client *client)
1353 snd_soc_unregister_codec(&client->dev);
1354 kfree(i2c_get_clientdata(client));
1358 static const struct i2c_device_id wm9081_i2c_id[] = {
1362 MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
1364 static struct i2c_driver wm9081_i2c_driver = {
1366 .name = "wm9081-codec",
1367 .owner = THIS_MODULE,
1369 .probe = wm9081_i2c_probe,
1370 .remove = __devexit_p(wm9081_i2c_remove),
1371 .id_table = wm9081_i2c_id,
1375 static int __init wm9081_modinit(void)
1378 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1379 ret = i2c_add_driver(&wm9081_i2c_driver);
1381 printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
1387 module_init(wm9081_modinit);
1389 static void __exit wm9081_exit(void)
1391 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1392 i2c_del_driver(&wm9081_i2c_driver);
1395 module_exit(wm9081_exit);
1398 MODULE_DESCRIPTION("ASoC WM9081 driver");
1399 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1400 MODULE_LICENSE("GPL");