#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {

	pm8916_0: pm8916@0 {
		compatible = "qcom,pm8916", "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		rtc@6000 {
			compatible = "qcom,pm8941-rtc";
			reg = <0x6000 0x6100>;
			reg-names = "rtc", "alarm";
			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		spmi_pon: pwrkey@800 {
			compatible = "qcom,pm8941-pwrkey";
			reg = <0x800>;
			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
			debounce = <15625>;
			bias-pull-up;
			resin-pull-up;
			linux,code = <KEY_RESTART>;
		};

		pm8916_gpios: gpios@c000 {
			compatible = "qcom,pm8916-gpio";
			reg = <0xc000 0x400>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
				     <0 0xc1 0 IRQ_TYPE_NONE>,
				     <0 0xc2 0 IRQ_TYPE_NONE>,
				     <0 0xc3 0 IRQ_TYPE_NONE>;
		};

		pm8916_mpps: mpps@a000 {
			compatible = "qcom,pm8916-mpp";
			reg = <0xa000 0x400>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
				     <0 0xa1 0 IRQ_TYPE_NONE>,
				     <0 0xa2 0 IRQ_TYPE_NONE>,
				     <0 0xa3 0 IRQ_TYPE_NONE>;
		};

		pm8916_temp: temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400 0x100>;
			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
			io-channel-names = "thermal";
			#thermal-sensor-cells = <0>;
		};

		pm8916_vadc: vadc@3100 {
			compatible = "qcom,spmi-vadc";
			reg = <0x3100 0x100>;
			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			#address-cells = <1>;
			#size-cells = <0>;
			#io-channel-cells = <1>;

			usb_in {
				reg = <VADC_USBIN>;
				qcom,pre-scaling = <1 10>;
			};
			vph_pwr {
				reg = <VADC_VSYS>;
				qcom,pre-scaling = <1 3>;
			};
			die_temp {
				reg = <VADC_DIE_TEMP>;
			};
			ref_625mv {
				reg = <VADC_REF_625MV>;
			};
			ref_1250v {
				reg = <VADC_REF_1250MV>;
			};
			ref_gnd {
				reg = <VADC_GND_REF>;
			};
			ref_vdd {
				reg = <VADC_VDD_VADC>;
			};
		};
	};

	pm8916_1: pm8916@1 {
		compatible = "qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		regulators {
			compatible = "qcom,pm8916-regulators";
			#address-cells = <1>;
			#size-cells = <1>;

			s1@1400 {
				reg = <0x1400 0x300>;
				status = "disabled";
			};

			pm8916_spmi_s2: s2@1700 {
				reg = <0x1700 0x300>;
				status = "ok";
				regulator-min-microvolt = <1050000>;
				regulator-max-microvolt = <1350000>;
			};

			s3@1a00 {
				reg = <0x1a00 0x300>;
				status = "disabled";
			};

			s4@1d00 {
				reg = <0x1d00 0x300>;
				status = "disabled";
			};

			l1@4000 {
				reg = <0x4000 0x100>;
				status = "disabled";
			};

			l2@4100 {
				reg = <0x4100 0x100>;
				status = "disabled";
			};

			l3@4200 {
				reg = <0x4200 0x100>;
				status = "disabled";
			};

			l4@4300 {
				reg = <0x4300 0x100>;
				status = "disabled";
			};

			l5@4400 {
				reg = <0x4400 0x100>;
				status = "disabled";
			};

			l6@4500 {
				reg = <0x4500 0x100>;
				status = "disabled";
			};

			l7@4600 {
				reg = <0x4600 0x100>;
				status = "disabled";
			};

			l8@4700 {
				reg = <0x4700 0x100>;
				status = "disabled";
			};

			l9@4800 {
				reg = <0x4800 0x100>;
				status = "disabled";
			};

			l10@4900 {
				reg = <0x4900 0x100>;
				status = "disabled";
			};

			l11@4a00 {
				reg = <0x4a00 0x100>;
				status = "disabled";
			};

			l12@4b00 {
				reg = <0x4b00 0x100>;
				status = "disabled";
			};

			l13@4c00 {
				reg = <0x4c00 0x100>;
				status = "disabled";
			};

			l14@4d00 {
				reg = <0x4d00 0x100>;
				status = "disabled";
			};

			l15@4e00 {
				reg = <0x4e00 0x100>;
				status = "disabled";
			};

			l16@4f00 {
				reg = <0x4f00 0x100>;
				status = "disabled";
			};

			l17@5000 {
				reg = <0x5000 0x100>;
				status = "disabled";
			};

			l18@5100 {
				reg = <0x5100 0x100>;
				status = "disabled";
			};
		};

		wcd_codec: codec@f000 {
			compatible = "qcom,msm8916-wcd-codec";
			reg = <0xf000 0x200>;
			reg-names = "pmic-codec-core";
			interrupt-parent = <&spmi_bus>;
			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
				     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
				     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
			interrupt-names = "spk_cnp_int",
					  "spk_clip_int",
					  "spk_ocp_int",
					  "ins_rem_det1",
					  "but_rel_det",
					  "but_press_det",
					  "ins_rem_det",
					  "mbhc_int",
					  "ear_ocp_int",
					  "hphr_ocp_int",
					  "hphl_ocp_det",
					  "ear_cnp_int",
					  "hphr_cnp_int",
					  "hphl_cnp_int";

			vddio-supply = <&pm8916_l5>;
			vdd-tx-rx-supply = <&pm8916_l5>;
			vdd-micbias-supply = <&pm8916_l13>;
			#sound-dai-cells = <1>;
		};
	};
};