JFS: diAlloc() should return -EIO rather than EIO

[mv-sheeva.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 3ce193f8656514519d9d9f1db03f24a5722c3011..cdd5b934f43ea89865f1f605ecc5f295b03192d3 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -496,6 +496,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        switching to the matching ttyS device later.  The
                        options are the same as for ttyS, above.
 
                        switching to the matching ttyS device later.  The
                        options are the same as for ttyS, above.
 

+                If the device connected to the port is not a TTY but a braille
+                device, prepend "brl," before the device type, for instance
+                       console=brl,ttyS0
+               For now, only VisioBraille is supported.
+

        earlycon=       [KNL] Output early console device and options.
                uart[8250],io,<addr>[,options]
                uart[8250],mmio,<addr>[,options]
        earlycon=       [KNL] Output early console device and options.
                uart[8250],io,<addr>[,options]
                uart[8250],mmio,<addr>[,options]


@@ -556,6 +561,8 @@ and is between 256 and 4096 characters. It is defined in the file
                        1 will print _a lot_ more information - normally
                        only useful to kernel developers.
 
                        1 will print _a lot_ more information - normally
                        only useful to kernel developers.
 

+       debug_objects   [KNL] Enable object debugging
+

        decnet.addr=    [HW,NET]
                        Format: <area>[,<node>]
                        See also Documentation/networking/decnet.txt.
        decnet.addr=    [HW,NET]
                        Format: <area>[,<node>]
                        See also Documentation/networking/decnet.txt.


@@ -1087,9 +1094,6 @@ and is between 256 and 4096 characters. It is defined in the file
        mac5380=        [HW,SCSI] Format:
                        <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
        mac5380=        [HW,SCSI] Format:
                        <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 

-       mac53c9x=       [HW,SCSI] Format:
-                       <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-

        machvec=        [IA64] Force the use of a particular machine-vector
                        (machvec) in a generic kernel.
                        Example: machvec=hpzx1_swiotlb
        machvec=        [IA64] Force the use of a particular machine-vector
                        (machvec) in a generic kernel.
                        Example: machvec=hpzx1_swiotlb


@@ -1518,6 +1522,8 @@ and is between 256 and 4096 characters. It is defined in the file
                                This is normally done in pci_enable_device(),
                                so this option is a temporary workaround
                                for broken drivers that don't call it.
                                This is normally done in pci_enable_device(),
                                so this option is a temporary workaround
                                for broken drivers that don't call it.

+               skip_isa_align  [X86] do not align io start addr, so can
+                               handle more pci cards

                firmware        [ARM] Do not re-enumerate the bus but instead
                                just use the configuration from the
                                bootloader. This is currently used on
                firmware        [ARM] Do not re-enumerate the bus but instead
                                just use the configuration from the
                                bootloader. This is currently used on