autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2

[karo-tx-uboot.git] / doc / README.imximage

diff --git a/doc/README.imximage b/doc/README.imximage
index 073e3fcb3c6ecc9a7dfa8af468c76f96b16bd4d5..27d335456997a702ff072f870e7e97fc5d91c74a 100644 (file)
--- a/doc/README.imximage
+++ b/doc/README.imximage
@@ -15,9 +15,6 @@ Booting from NOR flash does not require to use this image type.
 For more details refer Chapter 2 - System Boot and section 2.14
 (flash header description) of the processor's manual.
 
 For more details refer Chapter 2 - System Boot and section 2.14
 (flash header description) of the processor's manual.
 

-This implementation does not use at the moment the secure boot feature
-of the processor. The image is generated disabling all security fields.
-

 Command syntax:
 --------------
 ./tools/mkimage -l <mx u-boot_file>
 Command syntax:
 --------------
 ./tools/mkimage -l <mx u-boot_file>


@@ -65,9 +62,54 @@ Configuration command line syntax:
                                This command need appear the fist before
                                other valid commands in configuration file.
 
                                This command need appear the fist before
                                other valid commands in configuration file.
 

+       BOOT_OFFSET             value
+
+                               This command is parallel to BOOT_FROM and
+                               is preferred over BOOT_FROM.
+
+                               value:  Offset of the image header, this
+                                       value shall be set to one of the
+                                       values found in the file:
+                                               arch/arm/include/asm/\
+                                               imx-common/imximage.cfg
+                               Example:
+                               BOOT_OFFSET FLASH_OFFSET_STANDARD
+

        BOOT_FROM               nand/spi/sd/onenand/nor/sata
        BOOT_FROM               nand/spi/sd/onenand/nor/sata

+
+                               This command is parallel to BOOT_OFFSET and
+                               is to be deprecated in favor of BOOT_OFFSET.
+

                                Example:
                                BOOT_FROM spi
                                Example:
                                BOOT_FROM spi

+
+       CSF                     value
+
+                               Total size of CSF (Command Sequence File)
+                               used for Secure Boot/ High Assurance Boot
+                               (HAB).
+
+                               Using this command will populate the IVT
+                               (Initial Vector Table) CSF pointer and adjust
+                               the length fields only. The CSF itself needs
+                               to be generated with Freescale tools and
+                               'manually' appended to the u-boot.imx file.
+
+                               The CSF is then simply concatenated
+                               to the u-boot image, making a signed bootloader,
+                               that the processor can verify
+                               if the fuses for the keys are burned.
+
+                               Further infos how to configure the SOC to verify
+                               the bootloader can be found in the "High
+                               Assurance Boot Version Application Programming
+                               Interface Reference Manual" as part of the
+                               Freescale Code Signing Tool, available on the
+                               manufacturer's website.
+
+                               Example:
+                               CSF 0x2000
+

        DATA                    type address value
 
                                type: word=4, halfword=2, byte=1
        DATA                    type address value
 
                                type: word=4, halfword=2, byte=1


@@ -78,7 +120,7 @@ Configuration command line syntax:
                                DATA 4 0x73FA88a0 0x200
 
 The processor support up to 60 register programming commands for IMXIMAGE_VERSION 1
                                DATA 4 0x73FA88a0 0x200
 
 The processor support up to 60 register programming commands for IMXIMAGE_VERSION 1

-and 121 register programming commands for IMXIMAGE_VERSION 2.
+and 220 register programming commands for IMXIMAGE_VERSION 2.

 An error is generated if more commands are found in the configuration file.
 
 3. All commands are optional to program.
 An error is generated if more commands are found in the configuration file.
 
 3. All commands are optional to program.