-/*
- *------------------------------------------------------------------------
- * bnx2x_override_led_value -
- *
- * Override the led value of the requested led
- *
- *------------------------------------------------------------------------
- */
-u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port,
- u32 led_idx, u32 value)
-{
- u32 reg_val;
-
- /* If port 0 then use EMAC0, else use EMAC1*/
- u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- DP(NETIF_MSG_LINK,
- "bnx2x_override_led_value() port %x led_idx %d value %d\n",
- port, led_idx, value);
-
- switch (led_idx) {
- case 0: /* 10MB led */
- /* Read the current value of the LED register in
- the EMAC block */
- reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
- /* Set the OVERRIDE bit to 1 */
- reg_val |= EMAC_LED_OVERRIDE;
- /* If value is 1, set the 10M_OVERRIDE bit,
- otherwise reset it.*/
- reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) :
- (reg_val & ~EMAC_LED_10MB_OVERRIDE);
- REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
- break;
- case 1: /*100MB led */
- /*Read the current value of the LED register in
- the EMAC block */
- reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
- /* Set the OVERRIDE bit to 1 */
- reg_val |= EMAC_LED_OVERRIDE;
- /* If value is 1, set the 100M_OVERRIDE bit,
- otherwise reset it.*/
- reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) :
- (reg_val & ~EMAC_LED_100MB_OVERRIDE);
- REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
- break;
- case 2: /* 1000MB led */
- /* Read the current value of the LED register in the
- EMAC block */
- reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
- /* Set the OVERRIDE bit to 1 */
- reg_val |= EMAC_LED_OVERRIDE;
- /* If value is 1, set the 1000M_OVERRIDE bit, otherwise
- reset it. */
- reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) :
- (reg_val & ~EMAC_LED_1000MB_OVERRIDE);
- REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
- break;
- case 3: /* 2500MB led */
- /* Read the current value of the LED register in the
- EMAC block*/
- reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
- /* Set the OVERRIDE bit to 1 */
- reg_val |= EMAC_LED_OVERRIDE;
- /* If value is 1, set the 2500M_OVERRIDE bit, otherwise
- reset it.*/
- reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) :
- (reg_val & ~EMAC_LED_2500MB_OVERRIDE);
- REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
- break;
- case 4: /*10G led */
- if (port == 0) {
- REG_WR(bp, NIG_REG_LED_10G_P0,
- value);
- } else {
- REG_WR(bp, NIG_REG_LED_10G_P1,
- value);
- }
- break;
- case 5: /* TRAFFIC led */
- /* Find if the traffic control is via BMAC or EMAC */
- if (port == 0)
- reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN);
- else
- reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN);
-
- /* Override the traffic led in the EMAC:*/
- if (reg_val == 1) {
- /* Read the current value of the LED register in
- the EMAC block */
- reg_val = REG_RD(bp, emac_base +
- EMAC_REG_EMAC_LED);
- /* Set the TRAFFIC_OVERRIDE bit to 1 */
- reg_val |= EMAC_LED_OVERRIDE;
- /* If value is 1, set the TRAFFIC bit, otherwise
- reset it.*/
- reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) :
- (reg_val & ~EMAC_LED_TRAFFIC);
- REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
- } else { /* Override the traffic led in the BMAC: */
- REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
- + port*4, 1);
- REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4,
- value);
- }
- break;
- default:
- DP(NETIF_MSG_LINK,
- "bnx2x_override_led_value() unknown led index %d "
- "(should be 0-5)\n", led_idx);
- return -EINVAL;
- }
-
- return 0;
-}
-
-