+ /*
+ * encode rate per 802.11a-1999 sec 17.3.4.1, with lsb
+ * transmitted first
+ */
+ rate_signal = rate_info[rate] & BRCMS_RATE_MASK;
+ memset(plcp, 0, D11_PHY_HDR_LEN);
+ D11A_PHY_HDR_SRATE((struct ofdm_phy_hdr *) plcp, rate_signal);
+
+ tmp = (length & 0xfff) << 5;
+ plcp[2] |= (tmp >> 16) & 0xff;
+ plcp[1] |= (tmp >> 8) & 0xff;
+ plcp[0] |= tmp & 0xff;
+}
+
+/* Rate: 802.11 rate code, length: PSDU length in octets */
+static void brcms_c_compute_cck_plcp(struct brcms_c_info *wlc, u32 rspec,
+ uint length, u8 *plcp)
+{
+ int rate = rspec2rate(rspec);
+
+ brcms_c_cck_plcp_set(wlc, rate, length, plcp);
+}
+
+static void
+brcms_c_compute_plcp(struct brcms_c_info *wlc, u32 rspec,
+ uint length, u8 *plcp)
+{
+ if (is_mcs_rate(rspec))
+ brcms_c_compute_mimo_plcp(rspec, length, plcp);
+ else if (is_ofdm_rate(rspec))
+ brcms_c_compute_ofdm_plcp(rspec, length, plcp);
+ else
+ brcms_c_compute_cck_plcp(wlc, rspec, length, plcp);
+}
+
+/* brcms_c_compute_rtscts_dur()
+ *
+ * Calculate the 802.11 MAC header DUR field for an RTS or CTS frame
+ * DUR for normal RTS/CTS w/ frame = 3 SIFS + 1 CTS + next frame time + 1 ACK
+ * DUR for CTS-TO-SELF w/ frame = 2 SIFS + next frame time + 1 ACK
+ *
+ * cts cts-to-self or rts/cts
+ * rts_rate rts or cts rate in unit of 500kbps
+ * rate next MPDU rate in unit of 500kbps
+ * frame_len next MPDU frame length in bytes
+ */
+u16
+brcms_c_compute_rtscts_dur(struct brcms_c_info *wlc, bool cts_only,
+ u32 rts_rate,
+ u32 frame_rate, u8 rts_preamble_type,
+ u8 frame_preamble_type, uint frame_len, bool ba)
+{
+ u16 dur, sifs;
+
+ sifs = get_sifs(wlc->band);
+
+ if (!cts_only) {
+ /* RTS/CTS */
+ dur = 3 * sifs;
+ dur +=
+ (u16) brcms_c_calc_cts_time(wlc, rts_rate,
+ rts_preamble_type);
+ } else {
+ /* CTS-TO-SELF */
+ dur = 2 * sifs;
+ }
+
+ dur +=
+ (u16) brcms_c_calc_frame_time(wlc, frame_rate, frame_preamble_type,
+ frame_len);
+ if (ba)
+ dur +=
+ (u16) brcms_c_calc_ba_time(wlc, frame_rate,
+ BRCMS_SHORT_PREAMBLE);
+ else
+ dur +=
+ (u16) brcms_c_calc_ack_time(wlc, frame_rate,
+ frame_preamble_type);
+ return dur;
+}
+
+static u16 brcms_c_phytxctl1_calc(struct brcms_c_info *wlc, u32 rspec)
+{
+ u16 phyctl1 = 0;
+ u16 bw;
+
+ if (BRCMS_ISLCNPHY(wlc->band)) {
+ bw = PHY_TXC1_BW_20MHZ;
+ } else {
+ bw = rspec_get_bw(rspec);
+ /* 10Mhz is not supported yet */
+ if (bw < PHY_TXC1_BW_20MHZ) {
+ wiphy_err(wlc->wiphy, "phytxctl1_calc: bw %d is "
+ "not supported yet, set to 20L\n", bw);
+ bw = PHY_TXC1_BW_20MHZ;
+ }
+ }
+
+ if (is_mcs_rate(rspec)) {
+ uint mcs = rspec & RSPEC_RATE_MASK;
+
+ /* bw, stf, coding-type is part of rspec_phytxbyte2 returns */
+ phyctl1 = rspec_phytxbyte2(rspec);
+ /* set the upper byte of phyctl1 */
+ phyctl1 |= (mcs_table[mcs].tx_phy_ctl3 << 8);
+ } else if (is_cck_rate(rspec) && !BRCMS_ISLCNPHY(wlc->band)
+ && !BRCMS_ISSSLPNPHY(wlc->band)) {
+ /*
+ * In CCK mode LPPHY overloads OFDM Modulation bits with CCK
+ * Data Rate. Eventually MIMOPHY would also be converted to
+ * this format
+ */
+ /* 0 = 1Mbps; 1 = 2Mbps; 2 = 5.5Mbps; 3 = 11Mbps */
+ phyctl1 = (bw | (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
+ } else { /* legacy OFDM/CCK */
+ s16 phycfg;
+ /* get the phyctl byte from rate phycfg table */
+ phycfg = brcms_c_rate_legacy_phyctl(rspec2rate(rspec));
+ if (phycfg == -1) {
+ wiphy_err(wlc->wiphy, "phytxctl1_calc: wrong "
+ "legacy OFDM/CCK rate\n");
+ phycfg = 0;
+ }
+ /* set the upper byte of phyctl1 */
+ phyctl1 =
+ (bw | (phycfg << 8) |
+ (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
+ }
+ return phyctl1;
+}
+
+/*
+ * Add struct d11txh, struct cck_phy_hdr.
+ *
+ * 'p' data must start with 802.11 MAC header
+ * 'p' must allow enough bytes of local headers to be "pushed" onto the packet
+ *
+ * headroom == D11_PHY_HDR_LEN + D11_TXH_LEN (D11_TXH_LEN is now 104 bytes)
+ *
+ */
+static u16
+brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw,
+ struct sk_buff *p, struct scb *scb, uint frag,
+ uint nfrags, uint queue, uint next_frag_len)
+{
+ struct ieee80211_hdr *h;
+ struct d11txh *txh;
+ u8 *plcp, plcp_fallback[D11_PHY_HDR_LEN];
+ int len, phylen, rts_phylen;
+ u16 mch, phyctl, xfts, mainrates;
+ u16 seq = 0, mcl = 0, status = 0, frameid = 0;
+ u32 rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
+ u32 rts_rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
+ bool use_rts = false;
+ bool use_cts = false;
+ bool use_rifs = false;
+ bool short_preamble[2] = { false, false };
+ u8 preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
+ u8 rts_preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
+ u8 *rts_plcp, rts_plcp_fallback[D11_PHY_HDR_LEN];
+ struct ieee80211_rts *rts = NULL;
+ bool qos;
+ uint ac;
+ bool hwtkmic = false;
+ u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
+#define ANTCFG_NONE 0xFF
+ u8 antcfg = ANTCFG_NONE;
+ u8 fbantcfg = ANTCFG_NONE;
+ uint phyctl1_stf = 0;
+ u16 durid = 0;
+ struct ieee80211_tx_rate *txrate[2];
+ int k;
+ struct ieee80211_tx_info *tx_info;
+ bool is_mcs;
+ u16 mimo_txbw;
+ u8 mimo_preamble_type;
+
+ /* locate 802.11 MAC header */
+ h = (struct ieee80211_hdr *)(p->data);
+ qos = ieee80211_is_data_qos(h->frame_control);
+
+ /* compute length of frame in bytes for use in PLCP computations */
+ len = brcmu_pkttotlen(p);
+ phylen = len + FCS_LEN;
+
+ /* Get tx_info */
+ tx_info = IEEE80211_SKB_CB(p);
+
+ /* add PLCP */
+ plcp = skb_push(p, D11_PHY_HDR_LEN);
+
+ /* add Broadcom tx descriptor header */
+ txh = (struct d11txh *) skb_push(p, D11_TXH_LEN);
+ memset(txh, 0, D11_TXH_LEN);