-#include <linux/usb/storage.h>
-#include <scsi/scsi.h>
-#include <asm/unaligned.h>
-
-
-/*
- * Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with any other driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures.
- */
-#define FSG_VENDOR_ID 0x0525 /* NetChip */
-#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-#ifndef DEBUG
-#undef VERBOSE_DEBUG
-#undef DUMP_MSGS
-#endif /* !DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VLDBG LDBG
-#else
-#define VLDBG(lun, fmt, args...) do { } while (0)
-#endif /* VERBOSE_DEBUG */
-
-#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args)
-#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args)
-#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args)
-#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args)
-
-
-#ifdef DUMP_MSGS
-
-# define dump_msg(fsg, /* const char * */ label, \
- /* const u8 * */ buf, /* unsigned */ length) do { \
- if (length < 512) { \
- DBG(fsg, "%s, length %u:\n", label, length); \
- print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
- 16, 1, buf, length, 0); \
- } \
-} while (0)
-
-# define dump_cdb(fsg) do { } while (0)
-
-#else
-
-# define dump_msg(fsg, /* const char * */ label, \
- /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
-
-# ifdef VERBOSE_DEBUG
-
-# define dump_cdb(fsg) \
- print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \
- 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \
-
-# else
-
-# define dump_cdb(fsg) do { } while (0)
-
-# endif /* VERBOSE_DEBUG */
-
-#endif /* DUMP_MSGS */
-
-/*-------------------------------------------------------------------------*/
-
-/* Length of a SCSI Command Data Block */
-#define MAX_COMMAND_SIZE 16
-
-/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
-#define SS_NO_SENSE 0
-#define SS_COMMUNICATION_FAILURE 0x040800
-#define SS_INVALID_COMMAND 0x052000
-#define SS_INVALID_FIELD_IN_CDB 0x052400
-#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100
-#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500
-#define SS_MEDIUM_NOT_PRESENT 0x023a00
-#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302
-#define SS_NOT_READY_TO_READY_TRANSITION 0x062800
-#define SS_RESET_OCCURRED 0x062900
-#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900
-#define SS_UNRECOVERED_READ_ERROR 0x031100
-#define SS_WRITE_ERROR 0x030c02
-#define SS_WRITE_PROTECTED 0x072700
-
-#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */
-#define ASC(x) ((u8) ((x) >> 8))
-#define ASCQ(x) ((u8) (x))
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_lun {
- struct file *filp;
- loff_t file_length;
- loff_t num_sectors;
-
- unsigned int initially_ro:1;
- unsigned int ro:1;
- unsigned int removable:1;
- unsigned int cdrom:1;
- unsigned int prevent_medium_removal:1;
- unsigned int registered:1;
- unsigned int info_valid:1;
- unsigned int nofua:1;
-
- u32 sense_data;
- u32 sense_data_info;
- u32 unit_attention_data;
-
- unsigned int blkbits; /* Bits of logical block size of bound block device */
- unsigned int blksize; /* logical block size of bound block device */
- struct device dev;
-};
-
-static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
-{
- return curlun->filp != NULL;
-}
-
-static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
-{
- return container_of(dev, struct fsg_lun, dev);
-}
-
-
-/* Big enough to hold our biggest descriptor */
-#define EP0_BUFSIZE 256
-#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-
-static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
-module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
-MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
-
-#else
-
-/*
- * Number of buffers we will use.
- * 2 is usually enough for good buffering pipeline
- */
-#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
-
-#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-
-/* check if fsg_num_buffers is within a valid range */
-static inline int fsg_num_buffers_validate(void)
-{
- if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
- return 0;
- pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
- fsg_num_buffers, 2 ,4);
- return -EINVAL;
-}
-
-/* Default size of buffer length. */
-#define FSG_BUFLEN ((u32)16384)
-
-/* Maximal number of LUNs supported in mass storage function */
-#define FSG_MAX_LUNS 8
-
-enum fsg_buffer_state {
- BUF_STATE_EMPTY = 0,
- BUF_STATE_FULL,
- BUF_STATE_BUSY
-};
-
-struct fsg_buffhd {
- void *buf;
- enum fsg_buffer_state state;
- struct fsg_buffhd *next;
-
- /*
- * The NetChip 2280 is faster, and handles some protocol faults
- * better, if we don't submit any short bulk-out read requests.
- * So we will record the intended request length here.
- */
- unsigned int bulk_out_intended_length;
-
- struct usb_request *inreq;
- int inreq_busy;
- struct usb_request *outreq;
- int outreq_busy;
-};
-
-enum fsg_state {
- /* This one isn't used anywhere */
- FSG_STATE_COMMAND_PHASE = -10,
- FSG_STATE_DATA_PHASE,
- FSG_STATE_STATUS_PHASE,
-
- FSG_STATE_IDLE = 0,
- FSG_STATE_ABORT_BULK_OUT,
- FSG_STATE_RESET,
- FSG_STATE_INTERFACE_CHANGE,
- FSG_STATE_CONFIG_CHANGE,
- FSG_STATE_DISCONNECT,
- FSG_STATE_EXIT,
- FSG_STATE_TERMINATED
-};
-
-enum data_direction {
- DATA_DIR_UNKNOWN = 0,
- DATA_DIR_FROM_HOST,
- DATA_DIR_TO_HOST,
- DATA_DIR_NONE
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-
-static inline u32 get_unaligned_be24(u8 *buf)
-{
- return 0xffffff & (u32) get_unaligned_be32(buf - 1);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-enum {
- FSG_STRING_INTERFACE
-};
-