-/***** ETX_094 ********************************************************/
-#elif defined(CONFIG_ETX094)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# define STATUS_LED_BIT 0x00000001
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-/***** GEN860T *********************************************************/
-#elif defined(CONFIG_GEN860T)
-
-# define STATUS_LED_PAR im_ioport.iop_papar
-# define STATUS_LED_DIR im_ioport.iop_padir
-# define STATUS_LED_ODR im_ioport.iop_paodr
-# define STATUS_LED_DAT im_ioport.iop_padat
-
-# define STATUS_LED_BIT 0x0800 /* Red LED 0 is on PA.4 */
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
-# define STATUS_LED_STATE STATUS_LED_OFF
-# define STATUS_LED_BIT1 0x0400 /* Grn LED 1 is on PA.5 */
-# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 8)
-# define STATUS_LED_STATE1 STATUS_LED_BLINKING
-# define STATUS_LED_BIT2 0x0080 /* Red LED 2 is on PA.8 */
-# define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 4)
-# define STATUS_LED_STATE2 STATUS_LED_OFF
-# define STATUS_LED_BIT3 0x0040 /* Grn LED 3 is on PA.9 */
-# define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 4)
-# define STATUS_LED_STATE3 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-# define STATUS_LED_BOOT 1 /* Boot status on LED 1 */
-
-/***** IVMS8 **********************************************************/
-#elif defined(CONFIG_IVMS8)
-
-# define STATUS_LED_PAR im_cpm.cp_pbpar
-# define STATUS_LED_DIR im_cpm.cp_pbdir
-# define STATUS_LED_ODR im_cpm.cp_pbodr
-# define STATUS_LED_DAT im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
-# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE STATUS_LED_OFF
-# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
-# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1 STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
-# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */
-
-# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
-
-# define STATUS_LED_YELLOW 0
-# define STATUS_LED_GREEN 1
-# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
-
-/***** IVML24 *********************************************************/
-#elif defined(CONFIG_IVML24)
-
-# define STATUS_LED_PAR im_cpm.cp_pbpar
-# define STATUS_LED_DIR im_cpm.cp_pbdir
-# define STATUS_LED_ODR im_cpm.cp_pbodr
-# define STATUS_LED_DAT im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
-# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE STATUS_LED_OFF
-# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
-# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1 STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
-# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */
-
-# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
-
-# define STATUS_LED_YELLOW 0
-# define STATUS_LED_GREEN 1
-# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
-
-/***** LANTEC *********************************************************/
-#elif defined(CONFIG_LANTEC)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# if CONFIG_LATEC < 2
-# define STATUS_LED_BIT 0x1000
-# else
-# define STATUS_LED_BIT 0x0800
-# endif
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-/***** ICU862 ********************************************************/
-#elif defined(CONFIG_ICU862)
-
-# define STATUS_LED_PAR im_ioport.iop_papar
-# define STATUS_LED_DIR im_ioport.iop_padir
-# define STATUS_LED_ODR im_ioport.iop_paodr
-# define STATUS_LED_DAT im_ioport.iop_padat
-
-# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */
-# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-