+commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 4 00:35:15 2008 +0200
+
+ drivers/net/tsec.c: Fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 21:45:12 2008 -0400
+
+ version_autogenerated.h: use printf rather than echo -n
+
+ Some systems are dumb and do not implement the -n flag to echo (like OS X).
+ Convert the Makefile to use printf as this should work everywhere.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4acc2a108ad0a669165924704a6cb083f9138242
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 18:17:50 2008 -0400
+
+ fix building when saveenv is disabled in some setups
+
+ If you enable environment in the flash, but disable the embedded
+ option, and you disable the saveenv command, then the #if nested
+ logic will trigger a compile failure:
+ env_flash.c: In function 'env_relocate_spec':
+ env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
+ The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
+Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+Date: Fri May 2 16:10:04 2008 -0400
+
+ SBC8548: fix address mask to allow 64M flash
+
+ Fix incorrect mask to enable all 64MB of onboard flash.
+ Previously U-Boot incorrectly mapped only 8MB of flash, this
+ patch correctly maps all the available flash.
+
+ Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+
+commit 3648085c464c8c22ef76fab006ca4344d3796124
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 2 19:48:56 2008 +0200
+
+ qemu_mips: add README
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6fdd002689190a0022c7b3dbab37fcba724580ce
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri May 2 02:35:59 2008 +0200
+
+ Fix misspelled comment
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu May 1 04:13:05 2008 -0400
+
+ mkimage: make mmap() checks consistent
+
+ The mmap() related code is full of inconsistent casts/constants when
+ it comes to error checking, and may break when building on some
+ systems (like ones that do not implicitly define the caddr_t type).
+ Let's just avoid the whole mess by writing the code nice and clean in
+ the first place.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:34 2008 +0200
+
+ Fix defined but not used build warning
+
+ - warning: 'srom' defined but not used
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:26 2008 +0200
+
+ Fix implicit declaration build warnings
+
+ - warning: implicit declaration of function ‘serial_initialize’
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 9acde129cc3f9c1b3bc11a821480dd446774d618
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Apr 29 19:18:32 2008 +0200
+
+ TSEC: add config options for VSC8601 RGMII PHY
+
+ The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
+ and Tx clock lines. They are configured using 2 bits in extended
+ register 0x17.
+ Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
+ been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ --
+
+ drivers/net/tsec.c | 6 ++++++
+ drivers/net/tsec.h | 3 +++
+ 2 files changed, 9 insertions(+), 0 deletions(-)
+
+commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 23:07:15 2008 +0200
+
+ Revert "ColdFire: Get information from the correct GCC"
+
+ This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+ (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
+
+commit c4e5f52a58d278eebb87f476e353972c5dacea40
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 22:25:00 2008 +0200
+
+ config.mk: use correct (cross) compiler
+
+ Some config.mk files reference $(CC) to test for specific tool chain
+ features, so make sure $(CC) gets set before including any such
+ config files.
+
+ This patch replaces commit b7166e05a5 ("ColdFire: Get information from
+ the correct GCC").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 27c38689d0cfde0e444239345f97b5eecc9f4067
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:44 2008 +0200
+
+ pxa: fix previous definition on cpu init
+
+ start.S:183:1: warning: "ICMR" redefined
+ In file included from start.S:33:
+ include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
+ start.S:187:1: warning: "RCSR" redefined
+ ...
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d12e697de794d700767f22f950e3026ccf4daf6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:43 2008 +0200
+
+ pxa: fix pcmcia operation on 'i' may be undefined
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 30 16:24:35 2008 -0500
+
+ MPC8610HPCD: Drop -O2 from the build flags
+
+ Make the flags use -Os like all other boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 15:50:39 2008 +0200
+
+ RTC: Fix month offset by one problem in M41T62 RTC driver
+
+ This patch fixes a problem with the month being read and written
+ incorrectly (offset by one). This only gets visible by also using
+ the Linux driver (rtc-m41t80).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 141ba1cad8e6598a2466e7e2976c6a12285df619
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:44 2008 +0900
+
+ [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+ Current trick to pick up GNU assembler minor version uses a dot(.) as a
+ delimiter, and take the second field to obtain minor version number. But
+ as can be expected, this doesn't work with a version string which has
+ dots more than needs.
+
+ Here's an example:
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler'
+ GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
+ 2-129) 2
+ $
+
+ This patch restricts the version format to 2.XX.XX... This will work
+ in most cases.
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
+ 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
+ 18
+ $
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea638951acead7f1086c908c0b9f086beab82a22
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:28 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Add dcache_enable
+
+ Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
+ "allow ports to override bootelf behavior") requires ports to have this
+ function.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 1 21:30:16 2008 +0200
+
+ onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
+
+ Onenand needs a version of memcpy() which performs 16 bit accesses
+ only; make sure the name does not conflict with the standard
+ function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 12bc4e94251c369c529ffa505cf58b148c372f7f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 30 22:38:17 2008 +0200
+
+ cmd_nand: fix warning: str2long ncompatible pointer type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:16:11 2008 -0500
+
+ Fix calculation of I2C clock for some 86xx chips
+
+ Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
+ There is no pattern that can be used to determine which chips use which
+ frequency, so the only way to determine is to look up the actual SOC
+ designation and use the right value for that SOC.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:11:19 2008 -0500
+
+ ColdFire: Fix ethernet hang issue for mcf547x_8x
+
+ The ethernet hang is caused by receiving buffer in DRAM is not
+ yet ready due to access cycles require longer time in DRAM.
+ Relocate DMA buffer descriptors from DRAM to internal SRAM.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:47 2008 -0500
+
+ ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
+
+ Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:23 2008 -0500
+
+ ColdFire: Get information from the correct GCC
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Wed Apr 30 18:02:59 2008 +0200
+
+ Fix warning in env_nand.c if compiled for DaVinci Schmoogie
+
+ Fix warnings
+
+ nv_nand.c: In function 'saveenv':
+ env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
+ env_nand.c: In function 'env_relocate_spec':
+ env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
+
+ if compiled for davinci_schmoogie_config.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Ack by: Sergey Kubushyn <ksi@koi8.net>
+
+commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Apr 30 13:34:40 2008 +0200
+
+ Fix warnings while compiling net/net.c for MPC8610HPCD board
+
+ MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
+ causing overriding default -Os option. New gcc (ver. 4.2.2)
+ produces warnings while compiling net/net.c file with -O2
+ option. The patch is an attempt to fix this.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 58b575e575c25fdf8c88141e145db201f3092149
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:23:38 2008 +0200
+
+ lwmon5: fix offset error in sysmon0 POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e7419b243a373de4ee042f7d4f45f66de787240d
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:16:35 2008 +0200
+
+ lwmon5: fix manual merge error in POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:46:26 2008 +0200
+
+ cmd_nand.c: fix another 'incompatible pointer type' warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de109d909707e2dfe806be5efc3cdb103b47c8ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:25:07 2008 +0200
+
+ Makefile: fix parallel builds
+
+ This problem shows up with parallel builds only; it results in
+ somewhat cryptic error messages like
+
+ $ JOBS=-j6 MAKEALL netstar
+ Configuring for netstar board...
+ arm-linux-ld: cannot find -lgeneric
+ make[1]: *** [eeprom.srec] Error 1
+
+ A few boards (like netstar and voiceblue) need some libraries for
+ building; however, the board Makefile does not contain any such
+ dependencies which may cause problems with parallel builds. Adding
+ such dependencies is difficult as we would also have to provide build
+ rules, which already exist in the respective library Makefiles.
+
+ To solve this, we make sure that all libraries get built before the
+ board code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 14:51:36 2008 +0200
+
+ ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
+
+ This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
+ used for NAND booting to match the values needed for the new 512MB
+ DIMM modules shipped with the productions boards:
+
+ Crucial: CT6464AC667.8FB
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea9202a659dc75996facf1475f1866a19a9d3129
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 10:49:43 2008 +0200
+
+ ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
+
+ This patch fixes a problem with DIMMs that have 8 banks. Now the
+ MCIF0_MBxCF register will be setup correctly for this setup too.
+
+ This was noticed with the 512MB DIMM on Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:41:06 2008 +0200
+
+ Prepare v1.3.3-rc2, again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b7fcc4c13993782342cf5cd20d237a6281648a0b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:35:24 2008 +0200
+
+ Prepare v1.3.3-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:32:20 2008 +0200
+
+ common/env_nand.c: fix one more incompatible pointer type issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 21:33:08 2008 +0200
+
+ post/board/lwmon5/sysmon.c: fix manual merge error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 12:54:59 2008 -0500
+
+ 85xx: Add -mno-spe to e500/85xx builds
+
+ Newer gcc's might be configured to enable autovectorization by default.
+ If we happen to build with one of those compilers we will get SPE
+ instructions in random code.
+
+ -mno-spe disables the compiler for automatically generating SPE
+ instructions without our knowledge.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:18:34 2008 -0500
+
+ Update .gitignore for zlib.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45239cf4152109caa925145ccd433529902df887
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:27:08 2008 -0500
+
+ 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
+
+ All the 85xx and 86xx UM describe the register as timing_cfg_3
+ not as ext_refrec.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef7d30b14394e4c4a153118f5845760cadada02a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:28:34 2008 -0500
+
+ 85xx/86xx: Rename DDR init address and init extended address register
+
+ Rename init_addr and init_ext_addr to match the docs between
+ 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cf6cc014270549684873a5972d2595052c468cb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 28 02:24:04 2008 -0500
+
+ 85xx: Additional fixes and cleanup of MP code
+
+ * adjust __spin_table alignment to match ePAPR v0.94 spec
+ * loop over all cpus when determing who is up. This fixes an issue if
+ the "boot cpu" isn't core0. The "boot cpu" will already be in the
+ cpu_up_mask so there is no harm
+ * Added some protection in the code to ensure proper behavior. These
+ changes are explicitly needed but don't hurt:
+ - Added eieio to ensure the "hot word" of the table is written after
+ all other table updates have occurred.
+ - Added isync to ensure we don't prefetch loading of table entries
+ until we a released
+
+ These issues we raised by Dave Liu.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2d527a8b9fb50afccbaf79b5540952585cdc760
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 15:06:41 2008 +0200
+
+ lwmon5: minor clean-up to include/configs/lwmon5.h
+
+ LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
+ the CFG_DSPIC_TEST_ADDR definition more readable.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f4c4d21a885ccc222fd0acdf653b683249e85117
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 16:08:05 2008 +0200
+
+ ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 13:32:45 2008 +0200
+
+ ppc flush_cache: add watch-dog triggering into the loops.
+
+ Some boards (e.g. lwmon5) need rather a frequent watch-dog
+ kicking. Since the time it takes for the flush_cache() function
+ to complete its job depends on the size of data being flushed, one
+ may encounter watch-dog resets on such boards when, for example,
+ download big files over ethernet.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit cab99d6f3281ab6784feccf98b9b425daa58418a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:44:54 2008 +0200
+
+ ppc4xx: Fix compilation warning in denali_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:12:07 2008 +0200
+
+ ppc4xx: Fix Katmai CFG_MONITOR_LEN
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:57:07 2008 +0200
+
+ ppc4xx: Complete remove bogus dflush()
+
+ Since the current dflush() implementation is know to have some problems
+ (as seem on lwmon5 ECC init) this patch removes it completely and replaces
+ it by using clean_dcache_range().
+
+ Tested on Katmai with ECC DIMM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:36:51 2008 +0200
+
+ ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
+
+ As it seems the "old" ECC initialization routine by using dflush() didn't
+ write all lines in the dcache back to memory on lwmon5. This could lead
+ to ECC error upon Linux booting. This patch changes the program_ecc()
+ routine to now use clean_dcache_range() instead of dflush().
+ clean_dcache_range() uses dcbst which is exactly what we want in this
+ case.
+
+ Since dflush() is known is cause problems, this routine will be
+ removed completely and replaced by clean_dcache_range() with an
+ additional patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Apr 28 18:19:34 2008 +0200
+
+ POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
+Author: Markus Brunner <super.firetwister@googlemail.com>
+Date: Mon Apr 28 08:47:47 2008 +0200
+
+ ppc4xx: Fixup ebc clock in FDT for 405GP/EP
+
+ On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
+ and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
+ doesn't exist.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+
+commit 2ef7503a593c77a80c2a054011970227c4b62774
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:17 2008 +0200
+
+ NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
+
+ Move non-inlied functions into specific drivers file
+ Set get_prom as weak
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 17:04:19 2008 +0200
+
+ net: make ARP timeout configurable
+
+ Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
+ On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
+ to the boards get lost, which typically are ARP replies. By configuring
+ the timeout to a lower value we significantly improve the first network
+ transfer time on this board. The timeout is specified in milliseconds,
+ later internally it is converted to deciseconds, because it has to be
+ converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
+ different boards.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 13:36:18 2008 +0200
+
+ minor cs8900 driver clean up
+
+ Remove a redundant register definition, clean up some coding style
+ violations.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 22:01:04 2008 +0200
+
+ jffs2_1pass.c: fix incompatible pointer type warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 10:10:18 2008 +0200
+
+ lwmon5: update dsPIC POST spezification
+
+ The specification for the lwmon5 board dsPIC POST got changed.
+ Also add defines for the temperatures and voltages.
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 15:13:03 2008 +0200
+
+ Fix watchdog POST for lwmon5
+
+ If the hardware watchdog detects a voltage error, the watchdog sets
+ GPIO62 to low. The watchdog POST has to detect this low level.
+
+ Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dd5748bcd669f46aeb6686c1b341323843738ccc
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:37:14 2008 +0200
+
+ rtl8169: fix compiler warnings
+
+ Fix multiple compiler warnings related to argument type mismatch.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:36:06 2008 +0200
+
+ IDE: fix compiler warnings
+
+ The IDE driver can use 32-bit addresses in LBA mode, in which case it
+ spits multiple warnings during compilation. Fix them.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit db9084de28c46ac81c8f681722cb0d7411be4d7f
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:35:57 2008 +0200
+
+ LinkStation: fix compiler warning, add a maintainer
+
+ out_8 wants a pointer to an unsigned as the first argument. Add a
+ maintainer for Linkstation boards.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit c71abba3cb67b063f789f17abf6c7447727c0cd5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 14:55:12 2008 +0200
+
+ cmd_nand.c: fix "differ in signedness" problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2c288a35341ad02ac03b1563d786763c9c8f159
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:48:47 2008 +0200
+
+ pcnet.c: fix a merge issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:08:18 2008 +0200
+
+ NAND: fix some strict-aliasing compiler warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 28 11:37:14 2008 +0200
+
+ ppc4xx: Fix compile warning of hcu4 board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 11:31:23 2008 +0200
+
+ MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon Apr 28 00:25:32 2008 +0200
+
+ mx31ads: fix loadaddr environment variable define
+
+ Arithmetic expressions do not get evaluated under stringification. Remove
+ default network configuration, add DHCP command support. Thanks to Felix
+ Radensky for reporting.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 144eec777ac07bcb12bd38245a5a289f694a7f98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 941d696d25624e3cc65ebf924199541acf52d74e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Apr 26 11:44:44 2008 -0500
+
+ post: Fix building with O=
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:55:00 2008 +0200
+
+ Prepare v1.3.3-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19cf2ec90d8ce52da60c1693693c4048cb810967
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:25:39 2008 +0200
+
+ post/Makefile: make sure to use the correct flags
+
+ ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
+ messages to be printed.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 00:34:42 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f9204e15173834ff8d123e36279ce49c3c6c74fc
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:38:12 2008 +0200
+
+ i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
+
+ This patch enables SPI and MC13783/RTC support for the Litekit board.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit f97abbfb47d9e407354e157cae3f6369e460cd37
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Apr 25 01:08:32 2008 -0500
+
+ MPC8544DS: decode pcie3 end-point configuration correctly.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 292188e15523c165c4269403fdcd33c26d89176e
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Apr 25 00:55:09 2008 -0500
+
+ MPC8544DS: Removes the unknown flash message information
+
+ This patch removes the unknown flash message information:
+ '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
+ This unknown flash message is caused by PromJet.
+ Some of the board user is unhappy with this information.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Apr 24 14:07:38 2008 -0500
+
+ mpc83xx: bump loadaddr over fdtaddr to 0x500000
+
+ this seems as a good compromise between human memory, typing,
+ and last but not least, to accommodate for current and future kernel bloat.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+
+commit be5a7190265a34d968578ff266549c60f6f57654
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:12:23 2008 +0800
+
+ mpc83xx: clean up the readme for 83xx boards
+
+ 1. correct the typo
+ 2. correct the memory map for 837xerdb board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:11:11 2008 +0800
+
+ mpc83xx: remove the unused CPM's stuff
+
+ The MPC83xx family never have CPM block, so remove it from 83xx.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c63ad6325a8ac0097a54b418a3288926b0484b18
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 16:29:40 2008 +0200
+
+ cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
+
+ This patch adds a configurable flash auto protection list that can be used
+ to make U-Boot protect flash regions in flash_init().
+
+ The idea has been discussed on the u-boot mailing list starting
+ on Nov 18th, 2007.
+
+ Even this patch brings a new feature it is used as a bugfix for 4xx
+ platforms where flash_init() does not completely protect the
+ monitor's flash range in all situations.
+
+ U-Boot protects the flash range from CFG_MONITOR_BASE to
+ (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
+ include the reset vector at 0xfffffffc.
+
+ Example:
+ #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
+
+ This config option will auto protect the last 512k of flash that
+ contains the bootloader on board like APC405 and PMC405.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 25 13:59:03 2008 +0200
+
+ ppc4xx: Remove double defines in lwmon5.h
+
+ introduced with latest lwmon5/POST merge
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7590378fb9c686709492ceb142825cd058255956
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 13:54:02 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images - take two
+
+ Some files didn't get updated properly with the "Use watchdog-aware
+ functions when calculating hashes of images" commit, this commit
+ fixes this.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8e048c438e20ec89b49da5f085f8f756eba6e587
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 25 12:01:39 2008 +0200
+
+ ppc4xx: Add bootcount limit handling for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 12:10:09 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:44:08 2008 +0200
+
+ USB: fix more GCC 4.2.x aliasing warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:41:53 2008 +0200
+
+ lib_generic/crc32.c: add missing #include <watchdog.h>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 11:52:21 2008 +0200
+
+ lib_generic/crc32.c: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 12:20:32 2008 +0200
+
+ ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
+
+ The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
+ environment variable will now get passed to the Linux kernel by setting
+ the device_type property of the PCIe device tree node. For normal root-
+ complex configuration it will keep its defaults value of "pci" and for
+ endpoint configuration it will get changed to "pci-endpoint".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Apr 24 10:30:53 2008 +0200
+
+ lwmon5: watchdog POST fix
+
+ Use the GPT0_MASKx registers as the temporary storage for watch-dog
+ timer POST test instead of GPT0_COMPx. The latter
+ (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 21 18:10:14 2008 -0500
+
+ lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
+
+ This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
+ proven problematic getting right from the start at least on 83xx and
+ 4xx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a99715b8ebfc500f3f40e01b36b64d473938443d
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 18 14:50:01 2008 +0200
+
+ Realining some header definitions.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4acbc6c7f993cae409c424615415a3e76820f13d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:16 2008 +0200
+
+ NE2000: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4aff1ffaf7120032c653357c007faa14f74d29d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 23 00:11:47 2008 +0900
+
+ qemu-mips.h: Add CFI support
+
+ CONFIG_ENV_OVERWRITE is also added.
+
+ This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Apr 22 22:47:27 2008 +0900
+
+ doc/README.mips: Add MIPS notes
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 215b01bba8bc662d35f72b084700b192d367dfb4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Apr 22 12:27:56 2008 +0200
+
+ Add support for calculating hashes with watchdog triggering
+
+ Implement watchodg-aware variants of hash calculation functions:
+ - crc32_wd()
+ - md5_wd()
+ - sha1_csum_wd()
+ The above functions calculate the hash of the input buffer in chunks,
+ triggering the watchdog after processing each chunk. The chunk size
+ is given as a function call parameter.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Apr 23 11:02:12 2008 +0900
+
+ qemu-mips: Cleanup whitespace, indentation, etc.
+
+ No functional change.
+
+ This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
+ Then I re-created from scratch, and changed more lines than the original.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:02:09 2007 +0300
+
+ Fixed pcnet io_base
+
+ Bus and phys address are not always the same
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Apr 24 23:44:26 2008 +0200
+
+ drivers/net/pcnet.c: Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:04:23 2007 +0300
+
+ Added Am79C970A chip id to pcnet
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:35:03 2008 +0200
+
+ i.MX31: Fix architecture numbers for ADS and Litekit boards
+
+ Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit e7ae84d6c7288790e88639f57cb60daf89c11369
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:36:36 2008 +0200
+
+ i.MX31: Use symbolic names for Litekit membases.
+
+ Use symbolic names instead of hard coded addresses for Litekit membases.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 19 17:59:20 2008 +0200
+
+ Fix show_boot_progress prototype
+
+ in commit fad634071 "make show_boot_progress () weak."
+ show_boot_progress is supposed to be declared as weak but declared as
+ inline instead.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit edbed247a14d70b94958010f736621212285de91
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 18 12:39:23 2008 +0200
+
+ Memory footprint optimizations
+
+ As suggested by Wolfgang Denk:
+ - image printing functions:
+ - remove wrappers
+ - remove indentation prefix from functions' signatures
+ - merge getenv_verify and getenv_autostart into one parametrized function
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 13:33:11 2008 +0200
+
+ MX31ADS environment variable update, spi and rtc support
+
+ Update MX31ADS default environment to better match the flash layout and
+ the memory map, support SPI and RTC.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 21 09:28:36 2008 -0500
+
+ 85xx: Round up frequency calculations to get reasonable output
+
+ eg. because of rounding error we can get 799Mhz instead of 800Mhz.
+
+ Introduced DIV_ROUND_UP and roundup taken from linux kernel.
+
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 23 16:58:04 2008 -0500
+
+ fsl_pci: Only modify registers if we have them
+
+ pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 83fe32334337def160b302aa9d152d808bfcc68e
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:57:33 2008 +0200
+
+ USB: remove a cpu bug workaround for an unsupported architecture.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f957576cb53e6cfab412709cfc8db1afd39d21c3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:53:23 2008 +0200
+
+ USB: fix those pesky aliasing warnings issued by gcc-4.2
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 89cdab788f3716b335fefb60b836ebcf975aceab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 31 11:02:01 2008 -0400
+
+ crc32: use uint32_t rather than unsigned long
+
+ The envcrc.c does sizeof(unsigned long) when calculating the crc, but
+ this is done with the build toolchain instead of the target tool
+ chain, so if the build is a 64bit system but the target is 32bits,
+ the size will obviously be wrong. This converts all unsigned long
+ stuff related to crc32 to uint32_t types. Compile tested only: output
+ of ./tools/envcrc when run on a 32bit build system matches that of a
+ 64bit build system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 80c40b765b3642ddb9f3392b7898715aab44a29c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Mar 26 09:53:29 2008 +0100
+
+ ARM: Davinci: Fix DM644x timer overflow handling and cleanup
+
+ Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
+
+ Changes:
+
+ - Remove *_masked() functions as noted by Wolfgang
+
+ - Adapt register naming to recent TI spec (sprue26, March 2007)
+
+ - Fix reset_timer() handling
+
+ - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
+
+ - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
+
+ Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
+
+ Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
+
+commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Apr 9 16:09:41 2008 +0200
+
+ Added watchdog triggering calls in the "mtest" test function.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Apr 6 19:19:14 2008 +0200
+
+ lwmon5 watchdog: limit trigger rate
+
+ Limit the rate of h/w watch-dog triggering on the LWMON5 board by
+ the CONFIG_WD_MAX_RATE value.
+
+ Note that an earlier version of this patch which used microseconds
+ instead of ticks dis not work. The problem was that we used
+ usec2ticks() to convert microseconds into ticks. usec2ticks() uses
+ get_tbclk(), which in turn calls get_sys_info(). It turns out that
+ this function does a lot of prolonged operations (like divisions)
+ which take too much time so we do not trigger the watchdog in time,
+ and it resets the system.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d2b994a30bb100774dc747ae9865b7f95285a88
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:51:37 2008 +0200
+
+ POST: move CONFIG_POST to Makefiles
+
+ Introduce the new logical option CONFIG_HAS_POST which is set when the
+ platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
+ to determine should the POST libs be compiled for the selected target
+ platform, or not.
+
+ To avoid breaking u-boot linking process, the empty post/libpost.a file is
+ created for platforms which do not have POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:49:34 2008 +0200
+
+ POST: preparations for moving CONFIG_POST to Makefiles
+
+ Remove CONFIG_POST ifdefs from the post/ source files.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:14:20 2008 +0200
+
+ ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
+
+ This patch fixes the Canyonlands and Glacier default environment to better
+ fit to the arch/powerpc device-tree kernels. The variables dealing with
+ arch/ppc booting are removed, since these boards are supported only in
+ arch/powerpc. Glacier uses the same config file as Canyonlands.
+
+ Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:06:42 2008 +0200
+
+ ppc4xx: Small coding style cleanup for the latest esd patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 79941d63bc03aed8c48d7602f18217cc200ee931
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 18:01:07 2008 +0200
+
+ ppc4xx: Update CPU strapping for PMC440 boards
+
+ This patch removes the temporary 'test' strapping option
+ of the sbe command. The '667' strapping option now uses
+ a PLB/PCI divider of 3.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f00cf3193a6635355b121e90debb2f54e777e7da
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:21 2008 +0200
+
+ ppc4xx: Remove unused APC405 strataflash driver
+
+ The APC405 board support has been migrated to use the common
+ CFI flash driver.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1c686676a86473bbd92151f0544e109413f6ed06
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:17 2008 +0200
+
+ ppc4xx: Update APC405 configuration
+
+ - enable esd's auto_update mechanism
+ - support alternative flash layout on rev. 1.8 boards
+ - update default environment
+ - use common CFI flash driver
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 0b9872515a521bf7866dc24b85ddce708e60d702
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:11 2008 +0200
+
+ ppc4xx: Update APC405 board support
+
+ - enable esd's auto_update mechanism
+ - fix LCD support on latest hardware revision (uses other LCD controller)
+ - support alternative flash layout on rev. 1.8 boards
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 83975d02e225e231960784972e7820a8b303756b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:06 2008 +0200
+
+ ppc4xx: update esd's common auto_update code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - improve handling of protected flash regions
+ - remove dead code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b9233fe5d59cb25d975071616bd1035d6f4c2285
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:41:59 2008 +0200
+
+ ppc4xx: Update esd's common LCD code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - Add s1d13505 support
+ - Make some functions return a result code instead of void
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dea68189424c3f1242427a8146a3861bf093173c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:55 2008 +0200
+
+ ppc4xx: Update FPGA image for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a05b152924acfcec3b037693329e517e6d3578f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:08 2008 +0200
+
+ ppc4xx: Update bootlogo for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 18 16:41:31 2008 +0200
+
+ ppc4xx: Add dcache_enable() for 440
+
+ dcache_enable() was missing for 440 and the patch
+ 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
+ "] behavior uses this function.
+
+ Note: Currently the cache handling functions like
+ d/icache_disable/enable() are NOP's on 440. This may be changed in the
+ future.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a49e0d177a0749614b316ec847fb623f09c82c07
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:19:04 2008 +0200
+
+ video: Add missing free for logo memory
+
+ This patch adds two missing free()s.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
+Author: Troy Kisky <troy.kisky@boundarydevices.com>
+Date: Mon Sep 24 16:41:43 2007 -0700
+
+ PATCH - Fix oob data copied into supplied buffer
+
+ This patch correctly sets the oobavail variable
+ and fixes a bug where the oob data was not valid when
+ there where multiple groups in oobfree.
+
+ First segment fixes a typo
+ Second segment fixes a bug where oob data may be copied incorrectly.
+ Third segment adds an error message when exiting due to write protect.
+ Forth segment fixes a bug where oobavail may be set incorrectly.
+
+ Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
+
+commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 17:24:32 2008 +0200
+
+ ppc4xx: Fix sys_get_info() for 405GP(r)
+
+ This patch assigns the correct EBC clock for 405GP(r) CPUs
+ to PPC4xx_SYS_INFO structure. Without this patch U-Boot
+ uses an uninitialized EBC clock in its startup message.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:39:38 2008 -0700
+
+ Makefile: remove nand_spl/System.map when cleaning up.
+
+commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:35:52 2008 -0700
+
+ MAKEALL: sort entries / lists.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0878af169b181868a105b5c33f3a6423e2c9fd60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Apr 18 11:29:01 2008 -0500
+
+ 85xx: Fix size of cpu-release-addr property
+
+ The cpu-release-addr is defined as always being a 64-bit quanity regardless
+ if we are running on a 32-bit or 64-bit machine.
+
+commit 88353a985109562a639b2f8a0c90d77011bfe374
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:15:58 2008 -0500
+
+ Fix calculation of I2C clock for some 85xx chips
+
+ Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
+ some use CCB/3. There is no pattern that can be used to determine which
+ chips use which frequency, so the only way to determine is to look up the
+ actual SOC designation and use the right value for that SOC.
+
+ Update immap_85xx.h to include the GUTS PORDEVSR2 register.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 11:44:27 2008 -0700
+
+ Fix build breakage casued by commit c0559be371b2
+
+ Change env_get_char from a global function ptr to a function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 10:53:41 2008 -0700
+
+ Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Apr 8 14:00:57 2008 -0400
+
+ Add support for u-boot in svn and localversion-* files
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d23ff6827decf121461fbc5622612fd7effe207e
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 17:04:22 2008 +0200
+
+ MX31ADS network and flash updates
+
+ This patch allows U-Boot to use buffered writes to the Spansion NOR
+ flash installed on this board, and eliminates long delays in network
+ transfers after the board startup.
+
+ Also modify flash layout to embed main and redundant environment
+ blocks in the U-Boot image.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit b5dc9b304d289831f291843ff88a45cbdf1a6290
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon Apr 14 10:53:12 2008 +0200
+
+ Support for the MX31ADS evaluation board from Freescale
+
+ This patch adds support for the MX31ADS evaluation board from Freescale,
+ initialization code is copied from RedBoot sources, also provided by
+ Freescale.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:29 2008 +0200
+
+ ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:28 2008 +0200
+
+ ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:27 2008 +0200
+
+ ppc4xx: Add Glacier NAND booting target
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 46f373838e384a4c23d13581b1dfa5acb66b5810
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:31:00 2008 +0200
+
+ nand_spl: Update nand_spl to support 2k page size NAND devices
+
+ This patch adds support for booting from 2k page sized NAND device
+ (e.g. Micron 29F2G08AAC).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 17 18:18:00 2008 +0200
+
+ Fix crash on sequoia in ppc_4xx_eth_init
+
+ Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
+ with cache enabled (TLB Parity exeption). This patch
+ fixes the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 17 18:15:27 2008 +0200
+
+ ppc4xx: Fix crash on sequoia with cache enabled
+
+ Currently U-Boot crashes on sequoia board in CPU POST if
+ cache is enabled (CONFIG_4xx_DCACHE defined). The cache
+ won't be disabled by change_tlb before CPU POST because
+ there is an insufficient adress range check since
+ CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
+ this problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 43c509254fab375c49936498da944658117ed07c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Apr 17 23:35:13 2008 +0900
+
+ Use jr as register jump instruction
+
+ Current assembler codes are inconsistent in the way of register jump
+ instruction usage; some use jr, some use j. Of course GNU as allows both
+ usages, but as can be expected from `Jump Register' the mnemonic `jr' is
+ more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
+ at all.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 7ce63709828d37b08866e537339a169bd0db2bd3
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 14:15:30 2008 +0200
+
+ RTC driver for MC13783
+
+ MC13783 is a multifunction IS with an SPI interface to the host. This
+ driver handles the RTC controller in this chip.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 38254f45b0b412332726c90d3184ad47479fcffb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 14:14:25 2008 +0200
+
+ New i.MX31 SPI driver
+
+ This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
+ only implemented and tested on i.MX31, can with a modified register layout
+ and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
+ controllers too.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Tue Apr 15 19:09:10 2008 +0200
+
+ Fix name of i.MX31 boards in config file header
+
+ Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit a49864593e083a5d0779fb9ca98e5a0f2053183d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 13 19:42:19 2008 -0400
+
+ allow ports to override go behavior
+
+ Split the arch-specific logic out of the common go code and into a dedicated
+ weak function called do_go_exec() that lives in cpu directories. This will
+ need review from i386/nios people to make sure I didn't break them.
+
+commit 017e9b7925f74878d0e9475388cca9bda5ef9482
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 13 19:42:18 2008 -0400
+
+ allow ports to override bootelf behavior
+
+ Change the bootelf setup function into a dedicated weak function called
+ do_bootelf_exec. This way ports can control the behavior however they
+ like before/after calling the ELF entry point.
+
+commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Sat Apr 12 20:56:03 2008 +0200
+
+ Reorder ARM boards in Makefile
+
+ Rearrange ARM boards in Makefile so that ARM926EJ-S boards
+ are no longer under ARM92xT header.
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Sat Apr 12 20:29:44 2008 +0200
+
+ Clean up dataflash partitioning
+
+ This patch removes the board dependent parts from
+ "drivers/mtd/dataflash.c".
+ Each board relying on this, will have the appropriate
+ code in a new file, "partition.c" in the board directory.
+ board Makefiles updated to use the file.
+
+ The dataflash partitions are aligned on sector/page boundaries.
+
+ The CONFIG_NEW_DF_PARTITION was used to create named partitions
+ This is now the default operation, and the CONFIG variable is removed.
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+
+commit 51ecde946fec511a16346e498204ca10ad71080d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 12 14:08:45 2008 +0200
+
+ gitignore: udpate stgit generated and .patch file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 00:15:36 2008 -0700
+
+ Get rid of redundant copy of renamed header file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Fri Apr 11 21:20:14 2008 +0300
+
+ Fix dependency generation for older gcc versions
+
+ With gcc 3.3.3 at least, compilation fails with
+
+ Generating include/autoconf.mk
+ gcc: compilation of header file requested
+ make: *** [include/autoconf.mk] Error 1
+
+ since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit cb1c4896905ab22fcd982e6a8a539f0031942e71
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Apr 11 11:07:49 2008 +0200
+
+ Restore the ability to continue booting after legacy image overwrite
+
+ Before new uImage code was merged, bootm code allowed for the kernel image to
+ get overwritten during decompresion. new uImage introduced a check for image
+ overwrites and refused to boot the image that got overwritten. This patch
+ restores the old behavior. It also adds a warning when the image overwriten is
+ a multi-image file, because in such case accessing componentes other than the
+ first one will fail.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Apr 11 11:07:43 2008 +0200
+
+ ppc: Fix ftd_blob variable init when processing raw blob
+
+ Set fdt_blob variable before its value is printed out.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 3d36be030043cd841a2551d00a395135e363a64b
+Author: Jason Wessel <jason.wessel@windriver.com>
+Date: Thu Apr 10 14:30:16 2008 -0500
+
+ Remove all the search paths from the .lds files.
+
+ The cross compiler is responsible for providing the correct libraries
+ and the logic to find the linking libraries.
+
+ Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
+
+commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Mon Apr 14 15:44:16 2008 +0200
+
+ Boot-related documentation update
+
+ - document 'bootm_low' and 'bootm_size' environment variables
+ - update inaccurate CFG_BOOTMAPSZ entry
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Apr 9 17:34:08 2008 +0200
+
+ Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
+
+ Restore logic reverted by commit
+
+ commit 80767a6cead9990d9e77e62be947843c2c72f469
+ Author: Peter Pearse <peter.pearse@arm.com>
+ Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Apr 8 10:24:24 2008 -0400
+
+ Remove conflicting NAND ID
+
+ There are two NAND entries with ID 0xDC and this obviously causes problems.
+ In the kernel, they punted the first entry, so we should do the same.
+
+ See this upstream e-mail for more info:
+ http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
+
+ Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 188e94c370621708d13547d58dbc6ed3c5602aa8
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Tue Apr 8 16:20:35 2008 +0900
+
+ cpu/mips/cpu.c: Fix flush_cache bug
+
+ Cache operations have to take line address (addr), not start_addr.
+ I noticed this bug when debugging ping failure.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Apr 3 14:29:01 2008 +0200
+
+ TQM5200: fix default IDE reset level
+
+ Before the first call of ide_reset(), the level of the IDE reset
+ signal on the TQM5200 is low (reset asserted). This patch sets the
+ default value to high (reset not asserted).
+
+ Currently this patch fixes no real problem, but it is cleaner to
+ assert the reset signal only on demand, and not permanently.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit c61e033d6e8abb7b4060ee36060961e1399f6079
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 3 14:18:48 2008 +0200
+
+ mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 3 14:18:47 2008 +0200
+
+ mgcoge, mgsuv: rename 'addcon' to 'addcons'
+
+ The latter name with 13 users is already established, so we will use
+ that.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e175eacc87c3a9e4dad0799fee0e95732520afc7
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Apr 3 13:37:56 2008 +0200
+
+ IDE: fix bug in reset sequence
+
+ According to the ata (ata5) specification the RESET- signal
+ shall be asserted for at least 25 us. Without this patch,
+ the RESET- signal is asserted on some boards for only < 1 us
+ (e. g. on the TQM5200). This patch adds a general delay of
+ 25 us to the RESET- signal.
+
+ Without this patch a Platinum 4 GiB CF card is not recognised
+ properly on boards with a TQM5200 (STK52xx, TB5200).
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 813bea96a960916c72b4a3a7df840151529c26ce
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Thu Apr 3 14:43:11 2008 +0200
+
+ lwmon5: disable CONFIG_ZERO_BOOTDELAY
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:58 2008 +0200
+
+ ds174x: Fix warning on return in rtc_get and rtc_set functions
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a253b38bf50c85227c33ca0febc870ee49d1588e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:57 2008 +0200
+
+ cmd_log.c: Fix assignment differ in signedness
+
+ In function 'logbuff_init_ptrs':
+ cmd_log.c:79: warning: pointer targets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Wed Apr 2 11:04:43 2008 +0530
+
+ Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
+
+ Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
+
+commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Apr 1 14:07:10 2008 +0200
+
+ s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c08fb3ea36d19b1640b7906264581e9105534399
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Tue Apr 15 10:24:14 2008 +0200
+
+ Additional PCI IDs for IDE and network controllers
+
+ These PCI IDs are required by the Linkstation platforms.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit c0559be371b2a64b1a817088c3308688e2182f93
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date: Mon Apr 14 23:01:50 2008 +0200
+
+ Change env_get_char from a global function ptr to a function.
+
+ This avoids an early global data reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 3e0f331c05d72f140715c1e9fca991927e44d422
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 29 12:35:08 2008 +0000
+
+ Clean up smsc911x driver
+
+ Replace direct register address derefencing with accessor functions.
+ Restrict explicitly 32-bit bus-width, extend affected configurations
+ respectively.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Tue Apr 15 00:08:20 2008 -0400
+
+ This patch adds a driver for the following smsc network controllers:
+ LAN9115
+ LAN9116
+ LAN9117
+ LAN9215
+ LAN9216
+ LAN9217
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3dfd4aab929cccddb63d9ea509967861e1333b52
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 15:13:03 2008 +0200
+
+ Fix watchdog POST for lwmon5
+
+ If the hardware watchdog detects a voltage error, the watchdog sets
+ GPIO62 to low. The watchdog POST has to detect this low level.
+
+ Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
+
+commit 24b448448a917e52806f82660a5c9d47608894fb
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 1 15:22:11 2008 +0800
+
+ ata: update the libata.h from ata.h of linux kernel
+
+ Current libata.h of u-boot is out of sync from linux kernel,
+ this patch make it be consistent with linux kernel.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit f8f9dc98883f66f59eb0601da65808e6b139c87c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Mar 31 11:59:27 2008 -0500
+
+ Allow use of ARCH=powerpc when building
+
+ The linux kernel is now mostly ARCH=powerpc, so to make life easier
+ allow use to use ARCH=powerpc and convert it to ARCH=ppc.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:54 2008 +0900
+
+ Add apollon board MAINTAINERS entry
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 77e475cc0ed1832160017d364be32a0be9ff02a9
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:36 2008 +0900
+
+ Fix OneNAND read
+
+ It should access with 16-bit instead of 8-bit
+
+ Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a9da2b41079d230db3a5641625311983f85ce1fb
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:19 2008 +0900
+
+ Fix OneNAND erase command
+
+ It mis-calculates the block address.
+ Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 61525f2ffa156665a66908fda47dbf29d65ea579
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Mar 31 01:32:15 2008 +0200
+
+ Support for LinkStation / KuroBox HD and HG PPC models
+
+ This patch is based on the port by Mihai Georgian (see linkstation.c for
+ Copyright information) and implements support for LinkStation / KuroBox HD
+ and HG PPC models from Buffalo Technology, whereby HD is deactivated at
+ the moment, pending network driver fixing.
+
+ Notice to users: this is pretty much a barebone port. Support for network
+ on HG models is already in the U-Boot mainline, but you might also want
+ patches to switch fan / phy modes depending on the negotiated ethernet
+ parameters. This patch also doesn't support console switching, booting EM
+ mode, Buffalo specific ext2 magic number. So, if you want to use any of
+ those, you need additional patches. Otherwise this patche provides a fully
+ functional u-boot with a network console on your system.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Mar 30 01:22:13 2008 -0500
+
+ Add CONFIG_MII_INIT support to related boards
+
+ Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
+ cmd_init.c. Add CONFIG_MII_INIT to board configuration files
+ that use mii_init() in cmd_init.c.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Mar 30 01:19:06 2008 -0500
+
+ Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
+
+ Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
+ CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit e99ccb488181d012248c6be30b2093e950319fc5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 27 11:46:38 2008 -0500
+
+ Introduce phys_size_t and move phys_addr_t into asm/types.h
+
+ Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
+ that have larger physical addresses like 44x, 85xx, and 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20a14a42a25f72e379f38460b8a8484667536795
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Apr 2 16:19:07 2008 -0500
+
+ Rename include/md5.h to include/u-boot/md5.h
+
+ Some systems have md5.h installed in /usr/include/. This isn't the
+ desired file (we want the one in include/md5.h). This will avoid the
+ conflict. This fixes the host tools building problem by creating a new
+ directory for U-Boot specific header files.
+
+ [Patch by Andy Fleming, modified to use separate directory by Wolfgang
+ Denk]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+
+commit f297b7a1ec87433f66320d89d993e1bc738c66b8
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:51:17 2008 +0800
+
+ drivers: code clean up
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:50:41 2008 +0800
+
+ drivers: clean up the ata_piix.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e8f7ba404f1409606962815ecc955a06984b08b3
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:49:56 2008 +0800
+
+ doc: english polishing for README.sata
+
+ according to gvb's suggestion, polishing for the doc.
+
+ Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 3e3f766a5274d204780460e1879723b565296d34
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 18:53:28 2008 -0500
+
+ Fix warnings introduced by I2C bus speed setting patch
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c735e7437150e8615f26930c7819db85634276d
+Author: eran liberty <eran.liberty@gmail.com>
+Date: Thu Mar 27 00:50:49 2008 +0100
+
+ Altera Stratix II support
+
+ Adds Support for Altera's Stratix II.
+
+ Within your board specific init file you will have to call
+
+ 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
+ 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
+
+ Altera_desc* contines (for example):
+ {
+ Altera_StratixII, /* part type */
+ passive_serial, /* interface type */
+ 1, /* bytes of data part can accept */
+ (void *)(&funcs), /* interface function table */
+ 0L, /* base interface address */
+ 0 /* implementation specific cookie */
+ }
+
+ funcs is the interface. It is of type altera_board_specific_func.
+ It looks like this:
+ altera_board_specific_func func = {
+ pre_fn,
+ config_fn,
+ status_fn,
+ done_fn,
+ clk_fn,
+ data_fn,
+ abort_fn,
+ post_fn,
+ };
+
+ you will have to implement these functions, which is usually bit
+ banging some gpio.
+
+ Signed-off-by: Eran Liberty <liberty@extricom.com>
+
+commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 14:32:54 2008 -0700
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:41:17 2008 +0100
+
+ Phytec Phycore-i.MX31 support
+
+ This patch adds support for the Phytec Phycore-i.MX31 board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:41:09 2008 +0100
+
+ mx31 litekit support
+
+ This patch adds support for the mx31 litekit board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit cdace0661208754a53019ea0dc7b803a040e0939
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:49 2008 +0100
+
+ add an i2c driver for mx31
+
+ This patch adds an i2c driver for Freescale i.MX processors
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:42 2008 +0100
+
+ core support for Freescale mx31
+
+ This patch adds the core support for Freescale mx31
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 7ec68862a27c8f6f6d566228de8f6724d964a939
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 14:19:23 2008 -0700
+
+ Fix compile error
+
+ ...as suggested by Peter Pearse
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:36 2008 +0100
+
+ Separate omap24xx specific code from arm1136
+
+ Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
+ to cpu/arm1136/omap24xx.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 29 18:21:05 2008 -0500
+
+ disable caches before booting an app for Blackfin apps
+
+ It isn't generally save to execute applications outside of U-Boot with caches
+ enabled due to the way the Blackfin processor handles caches (requires
+ software assistance). This patch disables caches before booting an ELF or
+ just booting raw code. The previous discussion on the patch was that we
+ wanted to use weaks instead, but that proved to not be feasible when multiple
+ symbols are involved, which puts us back at the ifdef solution. I've
+ minimized the ugliness by moving the setup step outside of the main function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 10:03:54 2008 -0700
+
+ ppc: Get rid of unused machine type definitions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 09:59:26 2008 -0700
+
+ Coding Style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Feb 21 13:58:11 2008 -0500
+
+ LM73 bug fix for negative temperatures and cleanup
+
+ When the LM73 temperature sensor measures a temperature below 0 C, the
+ current driver does not perform sign extension, so the result returned is
+ 512 C too high. This patch fixes the problem, and does general cleanup
+ of the code.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 96ef831f713289afba19da0c8f905e99da2b23e0
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 13:36:02 2008 +0200
+
+ cfi_flash: Support buffered writes on non-standard Spansion NOR flash
+
+ Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
+ series require different addresses for buffered write commands. Define a
+ configuration option to support buffered writes on those chips. A more
+ elegant solution would be to automatically detect those chips by parsing
+ their CFI records, but that would require introduction of a fixup table
+ into the cfi_flash driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
+Author: Lee Nipper <lee.nipper@freescale.com>
+Date: Thu Apr 10 09:35:06 2008 -0500
+
+ mpc83xx: Update DIMM data bus width test to support 40-bit width
+
+ 32-bit wide ECC memory modules report 40-bit width.
+ Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5fb5a689d822ca61e814bd523fc930af335242fa
+Author: Dave Liu <r63238@freescale.com>
+Date: Mon Mar 31 17:05:12 2008 +0800
+
+ mpc83xx: Fix the bug of serdes initialization
+
+ Currently the serdes will not be initializated due to the
+ partid's error.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2000784818f043db7ca60e2846a72d097766b894
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Apr 3 16:28:29 2008 +0800
+
+ mpc83xx: Fix the SATA clock setting of 837x targets
+
+ Currently the SATA controller clock is configured as CSB clock,
+ usually the CSB clock is 400/333/266MHz.
+
+ However, The SATA IP block is only guaranteed to operate up to
+ 200 MHz as stated in the HW spec.
+
+ The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
+
+ This patch makes the SATA clock as half of CSB clock.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 13:41:21 2008 +0200
+
+ mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 9 04:20:57 2008 -0500
+
+ 85xx: Fix detection of MP cpu spin up
+
+ We were looking at the wrong memory offset to determine of a secondary
+ cpu had been spun up or not. Also added a warning message if the
+ all the secondary cpus we expect don't spin up.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f3e04bdc3f360c66801a9048956e61e41a16edba
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 8 10:45:50 2008 -0500
+
+ 85xx: Use SVR_SOC_VER instead of SVR_VER
+
+ The recent change introduced by 'Update SVR numbers to expand support'
+ now requires that we use SVR_SOC_VER instead of SVR_VER if we want
+ to compare against a particular processor id.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Fri Apr 11 10:00:35 2008 -0400
+
+ ppc4xx: Fix power mgt definitions for PPC440
+
+ Corrected DCR addresses of PPC440EP power management registers.
+
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+
+commit 950a392464e616b4590bc4501be46e2d7d162dea
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 11 15:11:26 2008 +0200
+
+ Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
+
+ Reverting became necessary after it turned out that the patches in
+ the u-boot-arm repo were modified, and in some cases corrupted.
+
+ This reverts the following commits:
+
+ 066bebd6353e33af3adefc3404560871699e9961
+ 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
+ c88ae20580b2b01487b4cdcc8b2a113f551aee36
+ a147e56f03871bba4f05058d5e04ce7deb010b04
+ d6674e0e2a6a1f033945f78838566210d3f28c95
+ 8c8463cce44d849e37744749b32d38e1dfb12e50
+ c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
+ 8bf69d81782619187933a605f1a95ee1d069478d
+ 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
+ a574a73852a527779234e73e17e7597fd8128882
+ 1377b5583a48021d983e1fd565f7d40c89e84d63
+ 1704dc20917b4f71e373e2c888497ee666d40380
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 11 07:02:29 2008 +0200
+
+ ppc4xx: Update Kilauea defconfig to use device-tree booting as default
+
+ This patch reworks the default environment on Kilauea/Haleakala. Now
+ "net_nfs" for exmaple uses the device-tree style booting formerly know
+ as "net_nfs_fdt". Also the addresses in RAM were changed because of the
+ new image booting support, which check for image overwriting. So the
+ addresses needed togeet adjusted.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 9 11:58:02 2008 +0200
+
+ ppc4xx: Fix Canyonlands default environment to work with new image support
+
+ Since the new image support checks for image overwriting, the default
+ environment needs to get adjusted to use correct addresses.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dfc6c7b647dba7ab86749616f0e9e5740deed422
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 9 11:54:11 2008 +0200
+
+ ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
+
+ The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
+ closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
+ on 4xx systems _start currently cannot be used for this calculation.
+ So revert back to the original version for now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f91374f65eae8b42cac329e06ba1c54728278efb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:49:52 2008 +0100
+
+ microblaze: Sort microblaze boards in MAKEALL script
+
+commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:58:45 2008 +0100
+
+ microblaze: clean microblaze_config.mk
+
+ FLAGS are generated by U-BOOT generator.
+ Board specific FLAGS are in board directory
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:47:19 2008 +0100
+
+ microblaze: xupv2p fix config file for supporting FDT
+
+commit 188dc16b189143573b1ed90e584bf866d75cdd12
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:53:02 2008 +0100
+
+ microblaze: ml401 fix config file for supporting FDT
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 4c6a6f02e239236261333759997eeaf86b30b54c
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:22:48 2008 +0100
+
+ microblaze: ml401 - add ifdef for GPIO
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:13:03 2008 +0100
+
+ microblaze: clean uart16550 and uartlite handling
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0b20f250877441460fb79d72192954abe8498834
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:08:31 2008 +0100
+
+ microblaze: Add Emaclite driver to Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 868cde5310f88234b774878e4f06e79df10a88b3
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:08:01 2008 +0100
+
+ microblaze: Add Emac driver to Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:42:29 2008 +0100
+
+ microblaze: add Emac ethernet driver
+
+commit 89c53891b18cbafd29ab8931b40e27ad231b6085
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:41:56 2008 +0100
+
+ microblaze: add Emaclite ethernet driver
+
+commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:04:01 2008 +0100
+
+ microblaze: ML401 and XUPV2P remove emac and emaclite reference
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 10:59:32 2008 +0100
+
+ microblaze: remove old setting for emac driver
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 10:58:15 2008 +0100
+
+ microblaze: Clean Makefile from ancient emac driver
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit ab68f921d9c741830f721c3d879c13a0c5597183
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:20:43 2008 +0100
+
+ SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 6ed8a43a19bb0275501bc286007daafa923552cf
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:38:48 2008 +0100
+
+ SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:34:47 2008 +0100
+
+ SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:06:52 2008 +0100
+
+ SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:26:48 2008 +0100
+
+ SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:00:33 2008 +0100
+
+ SPARC: Added support for SPARC LEON2 SOC Processor.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:00:38 2008 +0100
+
+ SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 22:51:29 2008 +0100
+
+ SPARC: Added support for SPARC LEON3 SOC processor.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit bf3d8b31169546fcddb4737391e1893fb12d033a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 08:29:26 2008 +0100
+
+ SPARC: added SPARC support for new uimage in common code.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 00ab32c85405a4fe65fd4128243086210fc90a21
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 22:36:03 2008 +0100
+
+ SPARC: added SPARC board information to the command bdinfo.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit c2f02da21a3f37f0878554eebc785e04fdc4e128
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 09:47:00 2008 +0100
+
+ SPARC: Added generic support for SPARC architecture.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit e54ec0f016803e4d9524ff71f7971bda0c51b287
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Apr 3 14:50:34 2008 +0200
+
+ ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
+
+ This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
+ has 2 RGMII instances and we need to configure the 2nd RGMII instance
+ for the EMAC2+3 channels.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c2a545ce33b26d80337f80b533828839249fb1c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:56 2008 +0200
+
+ MPC8xx: Fix libfdt support introduced in commit 77ff7b74
+
+ fdt.c: In function 'ft_cpu_setup':
+ fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
+ fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
+ fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
+ fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Mar 31 20:45:56 2008 -0500
+
+ Fix fdt set command to conform to dts spec
+
+ The fdt set command was treating properties specified as <00> and <0011>
+ as byte streams, rather than as an array of cells. As we already have
+ syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
+ we should use the <> syntax to describe arrays of cells, which are always
+ 32-bits per element. If we imagine this likely (IMHO) scenario:
+
+ > fdt set /ethernet-phy@1 reg <1>
+
+ With the old code, this would create a bad fdt, since the reg cell would be
+ made to be one byte in length. But the cell must be 4 bytes, so this would
+ break mysteriously.
+
+ Also, the dts spec calls for constants inside the angle brackets (<>)
+ to conform to C constant standards as they pertain to base.
+ Take this scenario:
+
+ > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
+
+ The old fdt command would complain that it couldn't parse that. Or, if you
+ wanted to specify that a certain clock ran at 33 MHz, you'd be required to
+ do this:
+
+ > fdt set /mydev clock <1f78a40>
+
+ Whereas the new code will accept decimal numbers.
+
+ While I was in there, I extended the fdt command parser to handle property
+ strings which are split across multiple arguments:
+
+ > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
+ > fdt p /ethernet@f00
+ ethernet@f00 {
+ interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
+ };
+
+ Lastly, the fdt print code was rearranged slightly to print arrays of cells
+ if the length of the property is a multiple of 4 bytes, and to not print
+ leading zeros.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 2 08:39:33 2008 +0200
+
+ ppc4xx: Canyonlands: Init SATA/PCIe port correctly
+
+ Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
+ interface. This usage can be configured with the jumper J6. This patch
+ correctly configures the SATA/PCIe PHY for SATA usage when this jumper
+ is installed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6fe2946f198481254a6ee9600d7456b8316a4083
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 17:37:49 2008 -0500
+
+ remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
+
+ finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
+ "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
+ started.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b5873f1732b92a25690e1513b90dfb0d644f6697
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Apr 1 07:30:51 2008 +0200
+
+ dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d934ea51f276522b532f870a820e844ff480b5b
+Author: Tor Krill <tor@excito.com>
+Date: Fri Mar 28 15:29:45 2008 +0100
+
+ Add Vitesse 8601 support to TSEC driver
+
+ Add phy_info for Vitesse VSC8601.
+ Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+ Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Mon Mar 31 14:25:00 2008 +0000
+
+ SPARC: added SMC91111 driver in and out macros for LEON processors.
+
+ This patch makes SPARC/LEON processors able to read and write
+ to the SMC91111 chip using the chip external I/O bus of the memory
+ controller. This patchs defines the standard in and out macros
+ expected by the SMC9111 driver.
+
+ To access that I/O bus one must set up the memory controller
+ (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
+ up this correctly when the other MCTRL parameters are set up. It
+ can be set up from the board configuration header file.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 18:52:34 2008 +0100
+
+ Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:31:04 2008 +0200
+
+ AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 18:52:33 2008 +0100
+
+ Add support for AT91SAM9260EK
+
+ Support for booting from internal DataFlash, external DataFlash card
+ or NAND flash is available.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 1762f13b4aab88b685b1722f17dada247945624b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:20:49 2008 +0200
+
+ AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 761712188b353494defb2b644491ff73d0daaa6f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:12:17 2008 +0200
+
+ AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 20:52:32 2008 +0100
+
+ Port AT91CAP9 to the new headers
+
+ Adapt the existing AT91CAP9 code to the new headers and APIs.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 19:52:31 2008 +0100
+
+ Finish header files reworking
+
+ Replace AT91CAP9.h file with several splitted header files coming
+ from the Linux kernel.
+
+ This is part 2 of the replacement: more header imports and edits.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 19:52:30 2008 +0100
+
+ Import several header files from Linux
+
+ Replace AT91CAP9.h file with several splitted header files coming
+ from the Linux kernel.
+
+ This is part 1 of the replacement: pristine header files import.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit a8a78f2d99dc1bd30dc3595da118539b506c6118
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 20:52:28 2008 +0100
+
+ Move at91cap9 specific files to at91sam9 directory
+
+ AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
+ common infrastructure can be used. Let this infrastructure be
+ named after the AT91SAM9 family, and move the existing AT91CAP9
+ files to the new place.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 61106a565870ff503f92b251b94bd7afef889a04
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 21:52:27 2008 +0100
+
+ Use timer_init() instead of board supplied interrupt_init()
+
+ The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
+ the board, so use timer_init() instead of interrupt_init().
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 21:52:36 2008 +0100
+
+ Cleanup DataFlash partition handling
+
+ DataFlash partition information has become a mess. This patch
+ defines a single partition scheme for Atmel DataFlashes. This partition
+ scheme will be used by all AT91CAP9 and AT91SAM9 boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Mar 28 08:47:45 2008 -0500
+
+ ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
+
+ When the version_string function in start.S is not 4-byte align,
+ it will cause the compiler generates "unaligned opcodes detected
+ in executable segment". This issue affects all ColdFire CPUs.
+ By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
+ it is not aligned.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit bae61eefe15b4d454060a7140e49ae58322be803
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Mar 25 15:41:15 2008 -0500
+
+ ColdFire: Add dspi and serial flash support for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 48ead7a7a922fceaf494e352abfab8216a41b417
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Mar 18 17:37:01 2008 -0500
+
+ ColdFire: Remove R5200 board
+
+ This board never went into production
+
+ Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
+Author: Matthew Fettke <[matthew.fettke@gmail.com]>
+Date: Thu Jan 24 14:02:32 2008 -0600
+
+ ColdFire: Added M5275EVB support.
+
+ Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
+Author: Matthew Fettke <[matthew.fettke@gmail.com]>
+Date: Mon Feb 4 15:38:20 2008 -0600
+
+ ColdFire: Added MCF5275 cpu support.
+
+ Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 12:14:11 2008 -0500
+
+ ColdFire: Define bootdelay in configuration file for M52277EVB
+
+ Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 77878f16cedee17161ff2336990970fffc6cea35
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 12:09:07 2008 -0500
+
+ ColdFire: Fix second memory Chipselect for M5475EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 43d60642395a550956cb21d287c8cfa563913d28
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Mar 13 14:26:32 2008 -0500
+
+ ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit eb14ebe813a0cb5d47905228da446a5ad692473b
+Author: Larry Johnson <lrj@acm.org>
+Date: Sun Mar 30 20:33:04 2008 -0500
+
+ ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 02e3892021112f21067d9ed1d04ae4182725ba52
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 31 12:20:48 2008 +0200
+
+ ppc4xx: Small whitespace fix of esd patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 034394abb524785047c815f00dde8cdbdc1593c5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:52:44 2008 +0200
+
+ ppc4xx: Cleanup PMC440 board support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit a6cc6c37188d85c25d167a4515da86f48d9a583e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:52:06 2008 +0200
+
+ ppc4xx: Add ptm configuration variables for PMC440
+
+ Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
+ environment variables.
+
+ Cleanup pci_target_init.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 7c91f51a2fe296909147f1646a1412729dd10b1d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:01:15 2008 +0200
+
+ ppc4xx: Minor updates for DU440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d5bffeb868d6b4d462f558dac43011027b6644b7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:54:20 2008 -0500
+
+ Blackfin: cleanup and overhaul common board init functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b86b3416f874358acaf07519e7620cdb2145f75b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:50:58 2008 -0500
+
+ Blackfin: cleanup lib_blackfin/cache.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 30 15:46:13 2008 -0400
+
+ Blackfin: unify cpu and boot modes
+
+ All of the duplicated code for Blackfin processors and boot modes have been
+ unified. After all, the core is the same for all processors, just the
+ peripheral set differs (which gets handled in the drivers).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 880cc4381ea8360248cddcdf87a64566745a5724
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 22:52:35 2008 +0100
+
+ Fix CFG_NO_FLASH compilation.
+
+ Many Atmel boards have no "real" (NOR) flash on board, and rely only
+ on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
+ be present in a board configuration file, while still enabling flash
+ commands like 'flinfo', 'protect', etc.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:58:13 2008 -0500
+
+ Blackfin: BF537-stamp: cleanup spi flash driver
+
+ This punts the old spi flash driver for a new/generalized one until the
+ common one can be integrated.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Mar 30 11:34:34 2008 -0400
+
+ Fix macro typo in common/cmd_mii.c
+
+ This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
+ actually applied the wrong patch.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 30 16:39:53 2008 +0200
+
+ use correct at91rm9200 register name in m501sk board
+
+ This fixes a naming bug for at91rm9200 lowlevel init code:
+ NOR boot flash is on chipselect 0, not chipselect 2. This
+ makes code use the register name from chip datasheets.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri Jan 18 12:55:00 2008 -0800
+
+ use correct at91rm9200 register name
+
+ This fixes a naming bug for at91rm9200 lowlevel init code:
+ NOR boot flash is on chipselect 0, not chipselect 2. This
+ makes code use the register name from chip datasheets.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit a3543d6dc52b0ba9c64016687cf32d600b31a476
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri Jan 18 12:45:45 2008 -0800
+
+ add missing ARM boards to MAKEALL
+
+ Add some missing ARM boards to MAKEALL. These build correctly,
+ unlike several of the boards already listed.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 066bebd6353e33af3adefc3404560871699e9961
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Sun Mar 30 11:34:09 2008 +0100
+
+ Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
+ to prevent compilation error.
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
+Author: Guennadi Liakhovetski <[lg@denx.de]>
+Date: Sun Mar 30 11:32:30 2008 +0100
+
+ Support for the MX31ADS evaluation board from Freescale
+
+ This patch adds support for the MX31ADS evaluation board from Freescale,
+ initialization code is copied from RedBoot sources, also provided by Freescale.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:27 2008 +0100
+
+ Phytec Phycore-i.MX31 support
+
+ This patch adds support for the Phytec Phycore-i.MX31 board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit a147e56f03871bba4f05058d5e04ce7deb010b04
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:24 2008 +0100
+
+ mx31 litekit support
+
+ This patch adds support for the mx31 litekit board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit d6674e0e2a6a1f033945f78838566210d3f28c95
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:21 2008 +0100
+
+ add SMSC LAN9x1x Network driver
+
+ This patch adds a driver for the following smsc network controllers:
+ LAN9115
+ LAN9116
+ LAN9117
+ LAN9215
+ LAN9216
+ LAN9217
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8c8463cce44d849e37744749b32d38e1dfb12e50
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:16 2008 +0100
+
+ add an i2c driver for mx31
+
+ This patch adds an i2c driver for Freescale i.MX processors
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:30:43 2008 +0100
+
+ core support for Freescale mx31
+
+ This patch adds the core support for Freescale mx31
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8bf69d81782619187933a605f1a95ee1d069478d
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:28:46 2008 +0100
+
+ Separate omap24xx specific code from arm1136
+
+ Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Sun Mar 30 11:23:05 2008 +0100
+
+ Add pmdra into MAKEALL
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit a574a73852a527779234e73e17e7597fd8128882
+Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
+Date: Sun Mar 30 11:21:58 2008 +0100
+
+ Adds support for the Prodrive PMDRA board, based on a DM6441
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 1377b5583a48021d983e1fd565f7d40c89e84d63
+Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
+Date: Sun Mar 30 11:11:34 2008 +0100
+
+ Removes all board specific code from the arch. part for DM644x (DaVinci) boards
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 1704dc20917b4f71e373e2c888497ee666d40380
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Sun Mar 30 11:09:01 2008 +0100
+
+ - Remove *_masked() functions as noted by Wolfgang
+ - Adapt register naming to recent TI spec (sprue26, March 2007)
+ - Fix reset_timer() handling
+ - As reported by Pieter [1] the overflow fix introduced a
+ delay of factor 16 (e.g 2 seconds became 32). While the
+ overflow fix is basically okay, it missed to divide udelay by
+ 16, too. Fix this.
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
+ - Remove software division of timer count value (DIV(x)
+ macro) and do it in hardware (TIM_CLK_DIV).
+ Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
+ and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
+ the hints & testing!
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+ Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
+
+commit ac3315c26e143c31680750c9c13f027efbcc887e
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 6 16:45:44 2008 +0100
+
+ new PHY @ e1000 - 2nd try
+
+ Add 82541ER device with latest integrated IGP2 PHY.
+ Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 20:22:53 2008 +0100
+
+ SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
+
+ GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
+ a debug link (EDCL). The GRETH core is documented in GRIP.pdf
+ available at www.gaisler.com.
+
+ If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
+ offloading etc.) can be determined by a bit in the control register.
+ The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 233a8bcd94997f3f345833a3b82e836222f2a206
+Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 17:08:22 2008 -0500
+
+ Add CONFIG_MII_INIT in cmd_mii.c
+
+ Provide common configuration in do_mii() to execute mii_init()
+ for all cpu architectures
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f605479de2deb11e834f31dfdb0af107c86aced6
+Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 17:08:16 2008 -0500
+
+ ColdFire: Fix FEC transmit issue for MCF5275
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
+Author: Aras Vaichas <arasv@magtech.com.au>
+Date: Wed Mar 26 09:43:57 2008 +1100
+
+ DHCP request fix for Windows Server 2003
+
+ Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
+ delay before sending "DHCP Request" in net/bootp.c. Required to overcome
+ interoperability problems with Windows Server 200x DHCP server when U-Boot
+ client responds too fast for server to handle.
+
+ Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 97bf85d784fbed485e652eb907589ad0d5cb7262
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 20:40:19 2008 +0100
+
+ MTD/CFI: flash_read64 is defined a weak function (for SPARC)
+
+ SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
+ SPARC CPUs implement flash_read64 which calls __raw_readq.
+
+ For current SPARC architectures (LEON2 and LEON3) each read from the
+ FLASH must lead to a cache miss. This is because FLASH can not be set
+ non-cacheable since program code resides there, and alternatively disabling
+ cache is poor from performance view, or doing a cache flush between each
+ read is even poorer.
+
+ Forcing a cache miss on a SPARC is done by a special instruction "lda" -
+ load alternative space, the alternative space number (ASI) is processor
+ implementation spcific and can be found by including <asm/processor.h>.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 70431e8a7393b6b793f77957f95b999fc9a269b8
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Fri Mar 28 15:41:25 2008 +0100
+
+ Make MPC83xx one step closer to full relocation.
+
+ Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
+ and use GOT relative reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b2793a3f3de34d439232b05acc8af67a028fd35
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 27 14:34:43 2008 -0400
+
+ mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
+
+ This patch fixes eeprom page size so that you can now write more than
+ 64 bytes at a time.
+
+ It also makes the board take MAC addresses, if found, from EEPROM.
+
+ User should place up to 4 addresses at offset 0x7f00, for
+ eth{,1,2,3}addr. Any unused addresses should be zero. This group of
+ four six-byte values should have it's CRC at the end. crc32 and
+ eeprom commands can be used to accomplish this.
+
+ If CRC fails, MAC addresses come from the environment. If CRC
+ succeeds, the environment is overwritten at startup.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f325cff31f6e745e6540014b131b9a97f61944c
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Fri Mar 28 15:15:38 2008 -0400
+
+ mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
+
+ Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
+ controller on the PCI bus in Linux on the MPC8323ERDB.
+
+ This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
+ config file.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:19:07 2008 -0500
+
+ mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
+
+ in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
+ 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
+ and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
+ REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
+ convenience macros.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:18:53 2008 -0500
+
+ mpc83xx: display ddr frequency in board_add_ram_info banner
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:18:40 2008 -0500
+
+ mpc83xx: unreinvent mem_clk
+
+ delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
+ mem_*_clk for consistency's sake.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 14:31:23 2008 -0500
+
+ mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:57:19 2008 +0800
+
+ mpc83xx: enable the SATA interface on mpc837xemds board
+
+ Enable the first two SATA interfaces on MPC837xEMDS board,
+ The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:56:36 2008 +0800
+
+ mpc83xx: initialize serdes for MPC837xEMDS boards
+
+ This patch is stolen from Anton Vorontsov's patch
+ for mpc837xerdb boards.
+
+ The reference clk and xcorevdd voltage of serdes1/2
+ is same between mpc837xemds and mpc837xerdb.
+
+ 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
+ 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
+ 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc8e839abc80887ae832767b5930d40edd6d7eb7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 28 14:09:04 2008 +0100
+
+ ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
+
+ Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
+ interface. This usage can be configured with the jumper J6. This patch
+ displays the current configuration upon bootup and changes the PCIe
+ init loop, to only initialize the availabel PCIe slots.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90447ecbbac8572457b6d8903073ac3f120995ba
+Author: Tor Krill <tor@excito.com>
+Date: Fri Mar 28 11:29:10 2008 +0100
+
+ MTD/CFI: Add support for 16bit legacy AMD flash
+
+ Add entry for 512Kx16 AMD flash to jedec_table.
+ Read out 16bit device id if chipwidth is 16bit.
+ Fixed coding style after Stefans feedback
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 28 11:02:53 2008 +0100
+
+ ppc: Small change to CFG_MEM_TOP_HIDE description
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Mar 27 15:44:12 2008 +0900
+
+ sh: Add support stat structure and stat.h
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
+Author: Mark Jonas <toertel@gmail.com>
+Date: Sat Mar 22 19:27:52 2008 +0100
+
+ sh: Removed warning when compiling drivers/serial/serial_sh.c.
+
+ Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f309fa38929ffba71230c02330ffa42f4bba6333
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 18:02:57 2008 +0900
+
+ sh: Remove disable_ctrlc function from R7780MP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 17:55:15 2008 +0900
+
+ sh: Add maintainer of R7780MP to MAINTAINER file
+
+ Update MAINTAINER entry for R7780MP. And fix maintainer's name.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f5e2466f7baa887a7df0c536333eea8231333497
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Mar 25 17:11:24 2008 +0900
+
+ sh: Add support Renesas Solutions R2D plus board
+
+ R2D plus is SH reference board used with SH7751R.
+ This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
+ one PCI bus, VGA, and two Ethernet controller.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e92c95180bb5bc5fd4051598a9d60beaba48988d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 12:15:29 2008 +0900
+
+ sh: Add support SH4 cache control
+
+ Add support SH4 cache control and flash_cache function
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 28e5efde4d925fcb34901d0030d0648de2da7e89
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Mar 24 01:53:01 2008 +0900
+
+ sh: Add support PCI host driver for SH7751/SH7751R
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Mar 24 02:11:26 2008 +0900
+
+ sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 566933278101c144d75361ea682678a326c1290d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 12:10:28 2008 +0900
+
+ sh: Add support SuperH SH7751/SH7751R
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3313e0e26224fc9a0c445124f3455058c696df84
+Author: Mark Jonas <toertel@gmail.com>
+Date: Mon Mar 10 11:37:10 2008 +0100
+
+ sh: Added support for SH7720 based board MPR2.
+
+ Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Mar 6 14:05:53 2008 +0900
+
+ sh: Fix receive FIFO level register of SH4A
+
+ Receive FIFO level register is different in SH4A.
+ Because register is different, cannot occasionally receive data.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c133c1fb0b590662206b0eba70f4478ee0300a9a
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Tue Mar 11 12:55:12 2008 +0900
+
+ sh: Add support Renesas Solutions R7780MP
+
+ Renesas Solutions R7780MP is a reference board on SH7780.
+ This board has serial, 10/100 base Ethernet deivice, CF slot
+ and VGA devices. This board can set extension board.
+ Extension board has 10/100/1000 base Ethernet device, PCI slot,
+ S-ATA, iDVR slot.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Wed Mar 5 14:30:02 2008 +0900
+
+ sh: Add support PCI of SuperH and SH7780
+
+ This patch add support PCI of SuperH base code and SH7780 specific code.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b55523efff2ae11f0b9ae3cc405893c32eb78156
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Wed Mar 5 14:23:26 2008 +0900
+
+ sh: Add support SH7780
+
+ SH7780 is CPU of Renesas Technology.
+ This CPU has
+ - CPU clock 400MHz
+ - PCI support
+ - DDR-SDRAM controller
+ - etc ...
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c2042f5952a686c414031309b8f244513bf578f0
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Fri Jan 25 20:46:36 2008 +0900
+
+ sh: Add support Renesas Solutions Migo-R board
+
+ Migo-R is a board based on SH7722 and has may devices.
+ In this patch, supported SCIF, NOR flash and Ethernet.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 27 15:06:40 2008 +0100
+
+ Fix host tool build breakage, take two
+
+ Revert commit 87c8431f and fix build breakage so that the build continues
+ to work on FC systems.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 09:36:47 2008 +0100
+
+ ppc4xx: Enable ECC on LWMON5
+
+ Since all ECC related problems seem to be resolved on LWMON5, this patch
+ now enables ECC support.
+
+ We have to write the ECC bytes by zeroing and flushing in smaller
+ steps, since the whole 256MByte takes too long for the external
+ watchdog.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
+Author: Larry Johnson <lrj@acm.org>
+Date: Mon Mar 17 11:10:35 2008 -0500
+
+ ppc4xx: Updates to Korat-specific code
+
+ This patch contains updates for changes for the Korat PPC440EPx board.
+ These changes include:
+
+ (1) Support for "permanent" and "upgradable" copies of U-Boot, as
+ described in the new "doc/README.korat" file;
+
+ (2) a new memory map for the registers in the board's CPLD;
+
+ (3) a revised format for manufacturer's data in serial EEPROM; and
+
+ (4) changes to track updates to U-Boot for the Sequoia board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit f766cdf89b3a2a7634b8c5869f606150e332036c
+Author: Markus Brunner <super.firetwister@gmail.com>
+Date: Thu Mar 27 10:46:25 2008 +0100
+
+ ppc4xx: PPC405EP Set EMAC noise filter bits
+
+ This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
+ which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
+ disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
+Author: Mike Nuss <mike@terascala.com>
+Date: Wed Feb 20 11:54:20 2008 -0500
+
+ ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
+
+ On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
+ after startup to change the speed of the clocks. This patch adds the
+ option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
+ initialization code will reconfigure the PLL to run the system with a CPU
+ frequency of 667MHz and PLB frequency of 166MHz, without the need for an
+ external EEPROM.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Mar 27 09:12:40 2008 +0100
+
+ new-image: Fix host tool build breakage
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 6fb4b640562a10daff0dbe537638d511b5b48650
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 10:24:03 2008 +0100
+
+ ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9462732a3ec551c11862450902cd8ee1bedea6d9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 10:23:43 2008 +0100
+
+ ppc4xx: Add fdt support to Prodrive alpr
+
+ Since this board will probably be ported to arch/powerpc in the
+ near future, we add device tree support now. This way we are
+ "ready" for arch/powerpc from now on.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
+Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+Date: Mon Mar 17 09:27:56 2008 +0100
+
+ ppc4xx: Enable cache support on the ALPR board
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 26 10:14:11 2008 +0100
+
+ ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
+
+ If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
+ memory area will get subtracted from the top (end) of ram and won't get
+ "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
+ should gets passed the now "corrected" memory size and won't touch it
+ either. This should work for arch/ppc and arch/powerpc. Only Linux board
+ ports in arch/powerpc with bootwrapper support, which recalculate the
+ memory size from the SDRAM controller setup, will have to get fixed
+ in Linux additionally.
+
+ This patch enables this config option on some PPC440EPx boards as a workaround
+ for the CHIP 11 errata. Here the description from the AMCC documentation:
+
+ CHIP_11: End of memory range area restricted access.
+ Category: 3
+
+ Overview:
+ The 440EPx DDR controller does not acknowledge any
+ transaction which is determined to be crossing over the
+ end-of-memory-range boundary, even if the starting address is
+ within valid memory space. Any such transaction from any PLB4
+ master will result in a PLB time-out on PLB4 bus.
+
+ Impact:
+ In case of such misaligned bursts, PLB4 masters will not
+ retrieve any data at all, just the available data up to the
+ end of memory, especially the 440 CPU. For example, if a CPU
+ instruction required an operand located in memory within the
+ last 7 words of memory, the DCU master would burst read 8
+ words to update the data cache and cross over the
+ end-of-memory-range boundary. Such a DCU read would not be
+ answered by the DDR controller, resulting in a PLB4 time-out
+ and ultimately in a Machine Check interrupt. The data would
+ be inaccessible to the CPU.
+
+ Workaround:
+ Forbid any application to access the last 256 bytes of DDR
+ memory. For example, make your operating system believe that
+ the last 256 bytes of DDR memory are absent. AMCC has a patch
+ that does this, available for Linux.
+
+ This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
+ lwmon5, korat, sequoia
+
+ The other remaining 440EPx board were intentionally not included
+ since it is not clear to me, if they use the end of ram for some
+ other purpose. This is unclear, since these boards have CONFIG_PRAM
+ defined and even comments like this:
+
+ PMC440.h:
+ /* esd expects pram at end of physical memory.
+ * So no logbuffer at the moment.
+ */
+
+ It is strongly recommended to not use the last 256 bytes on those
+ boards too. Patches from the board maintainers are welcome.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 10:09:05 2008 +0100
+
+ ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d56a3ce179688cde61073a3690e21703d68fafd7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 25 17:51:13 2008 +0100
+
+ ppc4xx: Correctly pass phyiscal FLASH base address into dtb
+
+ The routine ft_board_setup() configures the EBC NOR mappings for the
+ Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
+ 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
+ problem, we need to pass the corrected address here too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ad31989de12ce5c67b07c4867ead47465655c4b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 16:35:12 2008 +0100
+
+ ppc4xx: Fix compilation warning in 4xx_enet.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 16:20:49 2008 +0100
+
+ ppc4xx: Add AMCC Glacier 406GT eval board support
+
+ This patch adds support for the AMCC Glacier 460GT eval board.
+ The main difference to the Canyonlands board are listed here:
+
+ - 4 ethernet ports instead of 2
+ - no SATA port
+ - no USB port
+
+ Currently EMAC2+3 are not working. This will be fixed in a later
+ release.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 08:47:26 2008 +0100
+
+ ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b9670dd85be6e0496ef2e231043c23cad9b1d903
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 21:05:43 2008 +0100
+
+ Fix out of tree building issue
+
+ Currently U-Boot building in some external directory
+ doesn't work. This patch tries to fix the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 18:13:33 2008 +0100
+
+ README: update documentation (availability, links, etc.)
+
+ Fix typo in README
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 17:47:44 2008 +0100
+
+ Fix compilation error in cmd_usb.c
+
+ This patch fixes compilation error
+ cmd_usb.c: In function 'do_usb':
+ cmd_usb.c:552: error: void value not ignored as it ought to be
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d8c82db482d6b535d12b419d6440b88bf7091c9b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Mar 14 17:45:29 2008 -0500
+
+ Add support for setting the I2C bus speed in fsl_i2c.c
+
+ Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
+ the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
+ but fsl_i2c.c ignores it and uses conservative value when programming the
+ I2C bus speed.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 27 00:03:57 2008 +0100
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:55:32 2008 +0800
+
+ drivers: add the support for Freescale SATA controller
+
+ Add the Freescale on-chip SATA controller driver to u-boot,
+ The SATA controller is used on the 837x and 8315 targets,
+ The driver can be used to load kernel, fs and dtb.
+
+ The features list:
+ - 1.5/3 Gbps link speed
+ - LBA48, LBA28 support
+ - DMA and FPDMA support
+ - Two ports support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:54:44 2008 +0800
+
+ ata: add the readme for SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit cd54081cd479e542fc399b8a40651ff11a1ad849
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:53:24 2008 +0800
+
+ ata: enable the sata initialize on boot up
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:52:36 2008 +0800
+
+ ata: add the fis struct for SATA
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:51:44 2008 +0800
+
+ ata: add the libata support
+
+ add simple libata support in u-boot
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 8e9bb43429e50df55fa41932cbe65841ff579220
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:50:45 2008 +0800
+
+ ata: make the ata_piix driver using new SATA framework
+
+ original ata_piix driver is using IDE framework, not real
+ SATA framework. For now, the ata_piix driver is only used
+ by x86 sc520_cdp board. This patch makes the ata_piix driver
+ use the new SATA framework, so
+
+ - remove the duplicated command stuff
+ - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
+ - add the CONFIG_CMD_SATA define to sc520_cdp.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:49:44 2008 +0800
+
+ ata: add the support for SATA framework
+
+ - add the SATA framework
+ - add the SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:48:18 2008 +0800
+
+ ata: merge the header of ata_piix driver
+
+ move the sata.h from include/ to drivers/block/ata_piix.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 9eef62804d9695425b24c87b46a61a7fa74afee0
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:47:06 2008 +0800
+
+ ata: merge the ata_piix driver
+
+ move the cmd_sata.c from common/ to drivers/ata_piix.c,
+ the cmd_sata.c have some part of ata_piix controller drivers.
+ consolidate the driver to have better framework.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Mar 26 18:26:43 2008 +0100
+
+ USB, Storage: fix a bug introduced in commit
+ f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
+ to only print only information on one storage device, but not for
+ multiple.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 17:47:44 2008 +0100
+
+ Fix compilation error in cmd_usb.c
+
+ This patch fixes compilation error
+ cmd_usb.c: In function 'do_usb':
+ cmd_usb.c:552: error: void value not ignored as it ought to be
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 08:53:53 2008 -0500
+
+ 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
+
+ Provide a board_lmb_reserve helper function to ensure we reserve
+ the page of memory we are using for the boot page translation code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 79679d80021ab095e639e250ca472fe526da02e2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 08:34:25 2008 -0500
+
+ 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
+
+ The following changes are needed to be inline with ePAPR v0.81:
+
+ * r4, r5 and now always set to 0 on boot release
+ * r7 is used to pass the size of the initial map area (IMA)
+ * EPAPR_MAGIC value changed for book-e processors
+ * changes in the spin table layout
+ * spin table supports a 64-bit physical release address
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 25eedb2c1958a13110c7de1fc809b624053cc69c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 19 15:02:07 2008 -0500
+
+ FSL: Clean up board/freescale/common/Makefile
+
+ Each file that can be built here now follows some
+ CONFIG_ option so that they are appropriately built
+ or not, as needed. And CONFIG_ defines were added
+ to various board config files to make sure that happens.
+
+ The other board/freescale/*/Makefiles no longer need
+ to reach up and over into ../common to build their
+ individually needed files any more.
+
+ Boards that are CDS specific were renamed with cds_ prefix.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 22:00:27 2008 -0600
+
+ 85xx: Fix merge duplication
+
+ ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5893b3d0a4084f87a06a5d3dc03db91206818941
+Author: James Yang <James.Yang@freescale.com>
+Date: Tue Feb 12 16:35:07 2008 -0600
+
+ 85xx: Expand CCSR space with more DDR controller registers.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 18:05:08 2008 -0600
+
+ 85xx: Speed up get_ddr_freq() and get_bus_freq()
+
+ get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
+ called. However, get_sys_info() recalculates extraneous information when
+ called each time. Have get_ddr_freq() and get_bus_freq() return memoized
+ values from global_data instead.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e9ea679918fbc9a53fa2f2a904aac874ea736036
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 16:46:27 2008 -0600
+
+ 85xx: Show DDR memory data rate in addition to the memory clock frequency.
+
+ Show the DDR memory data rate in addition to the memory clock
+ frequency. For DDR/DDR2 memories the memory data rate is 2x the
+ memory clock.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 591933ca6eabc440e6ed6967233aaf56fce464a3
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 16:44:53 2008 -0600
+
+ 85xx: get_tbclk() speed up and rounding fix
+
+ Speed up get_tbclk() by referencing pre-computed bus clock
+ frequency value from global data instead of sys_info_t. Fix
+ rounding of result to nearest; previously it was rounding
+ upwards.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 6 01:19:40 2008 -0600
+
+ Update SVR numbers to expand support
+
+ FSL has taken to using SVR[16:23] as an SOC sub-version field. This
+ is used to distinguish certain variants within an SOC family. To
+ account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
+ constants to reflect the larger value. We also add SVR numbers for all
+ of the current variants. Finally, to make things neater, rather than
+ use an enormous switch statement to print out the CPU type, we create
+ and array of SVR/name pairs (using a macro), and print out the CPU name
+ that matches the SVR SOC version.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 6 01:12:57 2008 -0600
+
+ Add the Freescale PCI device IDs
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 11:04:23 2008 -0600
+
+ 85xx: Added support for multicore boot mechanism
+
+ Added the cpu command that provides a generic mechanism to get status,
+ reset, and release secondary cores in multicore processors.
+
+ Added support for using the ePAPR defined spin-table mechanism on 85xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 16:48:33 2008 -0600
+
+ 85xx: Added support for multicore boot mechanism
+
+ Added the cpu command that provides a generic mechanism to get status,
+ reset, and release secondary cores in multicore processors.
+
+ Added support for using the ePAPR defined spin-table mechanism on 85xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f69766e4b5d47ecd3aa58677a8da875694f364f2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 30 14:55:14 2008 -0600
+
+ 85xx: Add the concept of CFG_CCSRBAR_PHYS
+
+ When we go to 36-bit physical addresses we need to keep the concept of
+ the physical CCSRBAR address seperate from the virtual one.
+
+ For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 15:38:47 2008 +0100
+
+ Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Wed Mar 26 13:02:13 2008 +0100
+
+ Add CFG_RTC_DS1337_NOOSC to turn off OSC output
+
+ The default settings for RTC DS1337 keeps the OSC
+ output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
+ turn it off.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 11:48:46 2008 +0100
+
+ Cleanup coding style, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 10:40:12 2008 +0100
+
+ README: update documentation (availability, links, etc.)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
+Author: Aras Vaichas <arasv@magtech.com.au>
+Date: Tue Mar 25 12:09:07 2008 +1100
+
+ USB Storage, add meaningful return value
+
+ This patch changes the "usb storage" command to return success if it
+ finds a USB storage device, otherwise it returns error.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 18e69a35efbb078403db0c0063986470dad7d082
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 14 23:20:18 2008 +0300
+
+ 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
+
+ Linux understands "host" (default), "peripheral" and "otg" (broken).
+ Though, U-Boot doesn't restrict dr_mode variable to these values (think
+ of renames in future).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c7604783b236e368f225efb7b3efb418fe20b404
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 14 23:20:30 2008 +0300
+
+ tsec: fix link detection for the RTL8211B PHY
+
+ RTL8211B sets link state register after autonegotiation complete,
+ so with bootdelay=0 RTL8211B will report lack of the link.
+
+ To fix this, we should wait for aneg to complete, even if the
+ link is currently down.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:09 2008 +0300
+
+ mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
+
+ device_type = "soc" is being deprecated, newer device trees will use
+ "fsl,soc" and/or "fsl,immr" for the soc nodes.
+
+ This patch also adds clock-frequency property for soc nodes (the same
+ value as bus-frequency).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
+Author: Joe D'Abbraccio <ljd015@freescale.com>
+Date: Mon Mar 24 13:00:59 2008 -0400
+
+ Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
+
+ With the original value of 1/2 clock cycle delay, the system ran relatively
+ stable except when we run benchmarks that are intensive users of memory.
+ When I run samba connected disk with a HDBENCH test, the system locks-up
+ or reboots sporadically.
+
+ Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
+
+commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Mar 24 12:44:13 2008 -0500
+
+ mpc83xx: Set PCI I/O bus-address base to zero.
+
+ The device trees for these boards describe PCI I/O as starting from
+ address zero from the device's perspective.
+
+ Placing I/O elsewhere may cause problems with certain PCI boards, and may
+ cause problems with Linux.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:05 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
+
+ At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
+ This patch fixes "system time drifting" problem.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:02 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
+
+ This is needed to update /choosen/linux,stdout-path properly.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:47:00 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: add dhcp command
+
+ Plus modify environment to use it and remove bootfile env variable,
+ it is internal and CONFIG_BOOTFILE is used for these purposes.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:57 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
+
+ Current DDR setup easily causes memory corruption, this patch fixes it.
+
+ Also fix TIMING_CFG0_MRS_CYC definition.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:53 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
+
+ This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
+ controller and FHCI (QE USB).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 7ad959490962e6842648d87d4bd795ea6cdcce67
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:51 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: add support for NAND
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 9a3e832aeb491861d029991241572ebdf4b5b61b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:46 2008 +0300
+
+ mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
+
+ This is needed for BCM PHYs to work on this board.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:34 2008 +0300
+
+ uec: add support for Broadcom BCM5481 Gigabit PHY
+
+ This patch adds basic support for Broadcom BCM5481 PHY.
+
+ RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
+ Peter Barada <peterb@logicpd.com>.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 6a600c3a1876bc203445df4f0fd6b12648259666
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:28 2008 +0300
+
+ uec: add support for RGMII_RXID interface mode
+
+ PHY drivers will use it to setup software delay between RXD and RXC
+ signals.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 20:46:24 2008 +0300
+
+ uec: add support for gbit mii status readings
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:47 2008 +0300
+
+ 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
+
+ This is primarily for the early console support.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:43 2008 +0300
+
+ 83xx: initialize serdes for MPC837XRDB boards
+
+ On the MPC8377ERDB: 2 SATA and 2 PCI-E.
+ On the MPC8378ERDB: 2 PCI-E
+ On the MPC8379ERDB: 4 SATA
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 453316a2a19642d8afcbca7452e40a6b44a197b1
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:32 2008 +0300
+
+ 83xx: serdes setup routines
+
+ This patch adds few routines to configure serdes on 837x targets.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:27 2008 +0300
+
+ 83xx: split COBJS onto separate lines
+
+ ..plus get rid of some #ifdefs in the .c files.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Mar 24 17:40:23 2008 +0300
+
+ 83xx: nand support for MPC837XRDB boards
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 82e45a204190593e8613145a928f998fb8c909c4
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Tue Mar 18 21:44:41 2008 -0400
+
+ Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0fa7a1b4719e325fce332689fb8754ec166191ff
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:39 2008 -0400
+
+ mpc8323erdb: remove RTC and add EEPROM
+
+ There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:34 2008 -0400
+
+ mpc8323erdb: Improve the system performance
+
+ The following changes are based on kernel UCC ethernet performance:
+
+ 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
+ 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
+ switch to enable this setting.
+
+ The following changes are based on the App Note AN3369 and
+ verified to improve memory latency using LMbench:
+
+ 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
+ 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
+ previously.
+ 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
+ Twr=15ns, and this was already the setting in DDR_MODE)
+ 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
+ Trp=15ns)
+ 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
+ Tras=40ns)
+ 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
+ Trcd=15ns)
+ 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
+ Trfc=75ns)
+ 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
+ on Tfaw=50ns)
+ 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
+ on CL=3 and WL=2).
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fc549c871f43933396a5b3e21d897023d4b31b8d
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 20 13:15:28 2008 -0400
+
+ mpc8323erdb: use readable DDR config macros
+
+ Use available shift/mask macros to define DDR configuration.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 89c7784ed90ba50301eec521144f95111e472906
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Feb 8 13:15:55 2008 -0600
+
+ 83xx: Add Vitesse VSC7385 firmware uploading
+
+ Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
+ the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
+ Cleaned up the board header files to make selecting the VSC7385 easier to
+ control.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Feb 8 13:15:54 2008 -0600
+
+ NET: Add Vitesse VSC7385 firmware uploading
+
+ The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
+ and other boards. A small firwmare must be uploaded to its on-board memory
+ before it can be enabled. This patch adds the code which uploads firmware
+ (but not the firmware itself).
+
+ Previously, this feature was provided by a U-Boot application that was
+ made available only on Freescale BSPs. The VSC7385 firmware must still
+ be obtained separately, but at least there is no longer a need for a separate
+ application.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 00:52:10 2008 +0100
+
+ Coding Style cleanyp; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 43ddd9c820fec44816188f53346b464e20b3142d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 22 14:23:49 2008 -0400
+
+ Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
+
+ These defines embedded the u-boot env variables and/or the bd_t structure
+ in the fdt blob. The conclusion of discussion on the u-boot email list
+ was that embedding these in the fdt blob is not useful: there are better
+ ways of passing the data (in fact, the fdt blob itself replaces the
+ bd_t struct).
+
+ The only board that enables these is the stxxtc and they don't appear
+ to be used by linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 22ed2285743359fd1fe73e411dff914b2256e68f
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 17 10:49:25 2008 +0100
+
+ rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 17 08:54:06 2008 +0900
+
+ Add Flex-OneNAND booting support
+
+ Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
+ using a NOR Flash interface. This on-chip integration enables system designers
+ to reduce external system logic and use high-density NAND Flash
+ in applications that would otherwise have to use more NOR components.
+
+ Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
+ in more flexible way. While MLC area of Flex-OneNAND can be used to store data
+ that require low reliability and high density, SLC area of Flex-OneNAND
+ to store data that need high reliability and high performance. Flex-OneNAND
+ can let users take advantage of storing these two different types of data
+ into one chip, which is making Flex-OneNAND more cost- and space-effective.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c512389cc4a10253249271ff6c887c6dab1f0db2
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 13 13:50:52 2008 +0100
+
+ MPC5200: support setup without FEC
+
+ Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
+ defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit aa3511e422946041ef626f80a05ae5e8bfc700e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:46 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f1d846e5c5754449c286587d099d85246062772
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:47 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 18:05:45 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:33 2008 +0900
+
+ net: Add support AX88796L ethernet device
+
+ AX88796L is device of NE2000 compatible.
+ This patch support AX88796L ethernet device.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e0a6140dd381e1eed1ada2291166ef2616d8822b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 25 22:50:41 2008 +0100
+
+ ne2000 driver: change #ifdef to Makefile conditional compilation
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e710185aae90c64d39c2d453e40e58ceefe4f250
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Wed Mar 5 17:08:20 2008 +0900
+
+ net: Divided code of NE2000 ethernet driver
+
+ There are more devices of the NE2000 base.
+ A present code is difficult for us to support more devices.
+ To support more NE2000 clone devices, separated the function.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 395bce4f59a507a60a475f7ee46bed47de9482df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:58:13 2008 -0500
+
+ net/Blackfin: move on-chip MAC driver into drivers/net/
+
+ The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
+ directory, but it is not board specific, so relocate it to the drivers dir
+ so that other Blackfin ports can utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 24 23:52:35 2008 -0500
+
+ smc91111: use SSYNC() rather than asm(ssync) for Blackfin
+
+ Since the "ssync" instruction may have hardware anomalies associated with
+ it, have the smc91111 driver use the SSYNC macro rather than invoking it
+ directly. We workaround all the anomalies via this macro.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Sun Feb 17 22:57:47 2008 +0000
+
+ 8xx: Update OF support on 8xx
+
+ This patch does some shifting around of OF support on 8xx.
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit 9c666a7db0b2285a270c68810889ce7d5dba304b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 15:16:18 2008 -0600
+
+ ppc: Allow boards to specify how much memory they can map
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capble of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
+Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+Date: Fri Feb 15 01:05:58 2008 +0000
+
+ 8xx : Add OF support to Adder875 board port - resubmit
+
+ Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
+
+commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 20:44:42 2008 -0600
+
+ Add setexpr command
+
+ Add a simple expr style command that will set an env variable as the result
+ of the command. This allows us to do simple math in shell. The following
+ operations are supported: &, |, ^, +, -, *, /.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f105faa64b9826e088711fdfcaa70cb1230397a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:27:48 2008 -0600
+
+ FSL: Move board/mpc7448hpc2 under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 449c703374a8868453425e15da7e2f76221b72e4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 17:21:43 2008 -0600
+
+ FSL: Move board/mpc8266ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5863577989ad689427bb750107e9a75f1c1645d2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 5 16:41:41 2008 -0600
+
+ FSL: Move board/mpc8260ads under board/freescale
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8a773983957ee6c4aa344469b742f29c7d26afbd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:08 2008 +0900
+
+ [MIPS] Move gth2_config from ARM section to MIPS
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Fix dcache_status()
+
+ You can't judge UNCACHED by Config.K0 LSB.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Introduce _machine_restart
+
+ Handles machine specific functions by using weak functions.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit decaba6f5cf386d569ac3997bebb871b966c6b18
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Cleanup CP0 Status initialization
+
+ Add setup_c0_status from Linux. For the moment we disable interrupts, set
+ CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
+ reset-time configuration and will work well across most processors.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] Initialize CP0 Cause before setting up CP0 Status register
+
+ Without this change, we'll be suffering from deffered WATCH exception
+ once Status.EXL is cleared. Make sure Cause.WP is cleared.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 26138623230ca2bad3c78e05a65527ea70c8b688
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:07 2008 +0900
+
+ [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
+
+ Move things to appropriate place.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Implement flush_cache()
+
+ We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
+ don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
+ function is used not only in U-Boot specfic programs but also at loading
+ target binaries.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Fix I-/D-cache initialization loops
+
+ Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
+ again per a loop for I-cache initialization. But according to 'See MIPS
+ Run', we're encouraged to use three separate loops rather than combining
+ them *for both I- and D-cache*. This patch tries to fix this.
+
+ In accordance with fixing above, mips_init_[id]cache are separated from
+ mips_cache_reset(), and rewrite cache loops are completely rewritten with
+ useful macros.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 1898840797c7f50799377bd5b285a8a93a82c419
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] Replace memory clearance code with f_fill64
+
+ This routine fills memory with zero by 64 bytes, and is 64-bit capable.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 21:30:06 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
+
+ This patch replaces the current function definitions with NESTED, LEAF
+ and END macro. They specify some more additional information about the
+ function; an alignment of symbol, type of symbol, stack frame usage, etc.
+ These information explicitly tells the assembler and the debugger about
+ the types of code we want to generate.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 282223a607c611425fa33f5428f8eae6636972bb
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:43:17 2008 +0900
+
+ [MIPS] asm headers' updates
+
+ Make some asm headers adjusted to the latest Linux kernel.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Mar 25 11:39:29 2008 +0900
+
+ [MIPS] Request for the 'mips_cache_lock()' removal
+
+ The initial intension of having mips_cache_lock() was to use the cache
+ as memory for temporary stack use so that a C environment can be set up
+ as early as possible.
+
+ But now mips_cache_lock() follow lowlevel_init(). We've already have the
+ real memory initilaized at this point, therefore we could/should use it.
+ No reason to lock at all.
+
+ Other problems:
+
+ Cache locking is not consistent across MIPS implementaions. Some imple-
+ mentations don't support locking at all. The style of locking varies -
+ some support per line locking, others per way, etc. Some parts use bits
+ in status registers instead of cache ops. Current mips_cache_lock() is
+ not necessarily general-purpose.
+
+ And this is worthy of special mention; once U-Boot/MIPS locks the lines,
+ they are never get unlocked, so the code relies on whatever gets loaded
+ after U-Boot to re-initialize the cache and clear the locks. We're sup-
+ posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
+ but leave the situation as it is for a long time.
+
+ For these reasons, I proposed the removal of mips_cache_lock() from the
+ global start-up code.
+
+ This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
+ *things have changed*. If he wants the same behavior as before, he needs
+ to have CFG_INIT_RAM_LOCK_MIPS in his config file.
+
+ If we don't have any regression report through several releases, then
+ we'll remove codes entirely.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Andrew Dyer <amdyer@gmail.com>
+
+commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:30:54 2008 +0100
+
+ lwmon5 SYSMON POST: fix backlight control
+
+ If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
+ run on the board, then the SYSMON POST controls the display backlight
+ (doesn't switch backlight ON if POST FAILED, and does switch the
+ backlight ON if PASSED).
+
+ If not, then the video driver controls the display backlight (just
+ switch ON the backlight upon initialization).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 24 11:29:14 2008 +0100
+
+ lwmon5 SYSMON POST: fix handling of negative temperatures
+
+ Fix errors in the LWMON5 Sysmon POST for negative temperatures.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Mar 7 16:04:25 2008 +0900
+
+ pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
+
+ In current source code, when the device number of PCI is 0, process PCI
+ bridge without fail. However, when the device number is 0, it is not PCI
+ always bridge. There are times when device of PCI allocates.
+
+ When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
+ use this patch.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Mar 21 09:18:40 2008 +0100
+
+ LWMON5: fix dsPIC POST
+
+ Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
+
+commit 388b82fddc7c05596f3f615f190da0448227dc82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:23:13 2008 +0100
+
+ [new uImage] Enable new uImage support for the pcs440ep board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:23:13 2008 +0100
+
+ [new uImage] Do not compile new uImage format support by default
+
+ Disable default building of new uImage format support in preparation
+ for merge with the master. Support for new format can be enabled on
+ a per-board basis, by defining the following in the board's config file:
+
+ #define CONFIG_FIT 1
+ #define CONFIG_OF_LIBFDT 1
+
+ This can be optionally defined to give more verbose output:
+
+ #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit dafaede8a46c7159310239e036c93e31c6374487
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:20:31 2008 +0100
+
+ [new uImage] Disable debuging output in preparation for merge with master
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit fbe7a155027beacebaee9b32e1ada781fe924bca
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 19:38:45 2008 +0100
+
+ [new uImage] Compilation and new uImage handling fixes for imxtract
+
+ Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
+ include/config_cmd_default.h. Fix few warnings and handling of new format
+ images.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 36cc8cbb3379d5166f882641123521735c469f92
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:10:19 2008 +0100
+
+ [new uImage] Fix autoscr command used with new uImage format
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 43142e817f0597be412e7cbe19413f5532eafa5d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 20 23:10:19 2008 +0100
+
+ [new uImage] Fix *.its files location in documentation
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 20 22:01:38 2008 +0100
+
+ lwmon5 POST: remove unreachable code
+
+ plus some coding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Mar 20 17:56:04 2008 +0300
+
+ LWMON5: POST RTC fix
+
+ Modify the RTC API to provide one a status for the time reported by
+ the rtc_get() function:
+ 0 - a reliable time is guaranteed,
+ < 0 - a reliable time isn't guaranteed (power fault, clock issues,
+ and so on).
+
+ The RTC chip drivers are responsible for providing this info if the
+ corresponding chip supports such functionality. If not - always
+ report that the time is reliable.
+
+ The POST RTC test was modified to detect the RTC faults utilizing
+ this new rtc_get() feature.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Mar 19 14:25:14 2008 +0100
+
+ TQM5200B: update MTD partition layout
+
+ - insert partition for dtb blob to TQM5200B MTD layout
+ - set env variables dependent on the configured board
+ (TQM5200 or TQM5200B)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f0105727d132f56a21fa3ed8b162309cca6cac44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 07:09:26 2008 +0100
+
+ CFI: Small cleanup for FLASH_SHOW_PROGRESS
+
+ With this patch we don't need that many #ifdef's in the code. It moves
+ the subtraction into the macro and defines a NOP-macro when
+ CONFIG_FLASH_SHOW_PROGRESS is not defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a042e9ca512beaaa2cb450274313fc477141241
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Mar 8 13:48:01 2008 -0500
+
+ Flash programming progress countdown.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Mar 19 10:00:06 2008 +0100
+
+ [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:09:04 2008 +1100
+
+ libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
+
+ Since fdt_node_offset_by_compatible() was converted to the new
+ fdt_next_node() iterator, a chunk of initialization code became
+ redundant, but was not removed by oversight. This patch cleans it up.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit d0ccb9b140b472039732de102fc14597eedb14df
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Feb 18 18:06:31 2008 +1100
+
+ libfdt: Trivial cleanup for CHECK_HEADER)
+
+ Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
+ However, there are a handful of functions (fdt_move, rw_check_header,
+ fdt_open_into) from other files which could also use it (currently
+ they open-code something more-or-less identical). Therefore, this
+ patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
+ places.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fe30a354cdbb808b5f15366a935b151a4ccee74f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 20 14:32:36 2008 -0600
+
+ Fix fdt boardsetup command parsing
+
+ The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 804887e6001e2f00bea11431bf34d6d472512cda
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 15 03:34:36 2008 -0600
+
+ Add sub-commands to fdt
+
+ fdt header - Display header info
+ fdt bootcpu <id> - Set boot cpuid
+ fdt memory <addr> <size> - Add/Update memory node
+ fdt rsvmem print - Show current mem reserves
+ fdt rsvmem add <addr> <size> - Add a mem reserve
+ fdt rsvmem delete <index> - Delete a mem reserves
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Thu Feb 14 16:50:34 2008 +1100
+
+ libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
+
+ fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
+ node which has NOP tags interspersed with its properties. In this
+ case fdt_add_subnode_namelen() will put the new subnode before the
+ first NOP tag, even if there are properties after it, which will
+ result in an invalid blob.
+
+ This patch fixes the bug, and adds a testcase for it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 11:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Jan 11 14:55:05 2008 +1100
+
+ libfdt: Add fdt_set_name() function
+
+ This patch adds an fdt_set_name() function to libfdt, mirroring
+ fdt_get_name(). This is a r/w function which alters the name of a
+ given device tree node.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 23e20aa6488e6c0622496549861bfdc74108debe
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 46bc0a938779aa1d664b847d36b08aa00f22e539
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switched on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board. These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit c2ed33efbfff5767bca236828e021c55fd547b6c
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
+commit 3a5d1e7f1309998791702b2a559e3126781746b9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switcehd on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for
+ the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
+ the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
+ PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff818b21b069f4bc9cb73373cc5a16014be101b7
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5.
+ Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit e262efe35742c1ad4b0966ff501efc26f34a0aec
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test
+ marked as POST_CRITICAL fails then the alternative, post_critical,
+ boot-command is used. If this command is not defined then U-Boot
+ enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 65b20dcefc89618193fa51947968dada91e4c778
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board.
+ These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
+commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 18 17:35:51 2008 +0100
+
+ HMI1001: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f2a9970109cebf7446e0503b10b71f8673045ee
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:32:30 2008 -0500
+
+ Blackfin: BF537-stamp: drop board-specific flash driver for CFI
+
+ The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
+ for the board specific driver at all. Just use the common CFI driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:36:14 2008 -0500
+
+ Blackfin: add proper ELF markings to some assembly functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:35:17 2008 -0500
+
+ Blackfin: new cplbinfo command for viewing cplb tables
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit aadb72503cd1602349a5fe53356d5f55ecc1b900
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:37:51 2008 -0500
+
+ Blackfin: update MAINTAINERS list
+
+ Add maintainer information for the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:26:48 2008 -0500
+
+ Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
+
+ Stop tying things to the processor that should be tied to other defines and
+ change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
+ system to select the -mcpu option.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 86a20fb920bd198105acf7b1191117f566d637ed
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 07:40:36 2008 -0500
+
+ Blackfin: move bootldr command to common code
+
+ This moves the Blackfin-common bootldr command out of the BF537-STAMP
+ specific board directory and into the common directory so that all Blackfin
+ boards may utilize it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit decbe029b2a9d3333d02c433389b1c821eea96d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 14 11:05:20 2008 +0100
+
+ mgcoge: update configuration
+
+ Fix configuration for mgcoge board
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c136724cda0219c49f1d4b346f00da29b14fdf14
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:22:59 2008 +0100
+
+ drivers/rtc/Makefile: keep list sorted
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
+Author: Tor Krill <tor@excito.com>
+Date: Sat Mar 15 15:40:26 2008 +0100
+
+ Add support for Intersil isl1208 RTC
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 0210cff3d079d97b2156b13685ee8de368e68a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 15 17:36:41 2008 +0100
+
+ cramfs: Fix ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 16 01:12:58 2008 +0100
+
+ Conding style cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41712b4e8c95dff23354bcd620e1f9477160c190
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:31:53 2008 +0100
+
+ ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
+
+ This patch adds USB OHCI support to the Canyonlands board port. It also
+ enables EXT2 support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2596f5b9d353ff3e4387a3325d05740f16958038
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 5 12:29:32 2008 +0100
+
+ usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
+
+ This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
+ way a board just needs to define this new option to enable the "force
+ NoPowerSwitching mode" instead of adding new CPU/architecture defines
+ to the USB source itself.
+
+ This new option will be used first with the new AMCC 460EX Canyonlands
+ board port, which will be posted in a few days.
+
+ This patch also fixes a small compilation problem when DEBUG is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71665ebf88408ff2acb762af47989fd4365b321a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 3 17:27:02 2008 +0100
+
+ ppc4xx: Add Canyonlands NAND booting support
+
+ 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
+ NAND devices. The only bootstrap option for NAND booting is option F for
+ 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
+ EEPROM needs to be programmed accordingly.
+
+ This patch adds basic NAND booting support for the AMCC Canyonlands aval
+ board and also adds support to the "bootstrap" command, to enable NAND
+ booting I2C setting.
+
+ Tested with 512 byte page NAND device (32MByte) on Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:53:00 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:52:24 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 16:51:17 2008 +0100
+
+ ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
+
+ This patch adds support for the AMCC Canyonlands 460EX evaluation
+ board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:43 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:11:18 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 999ecd5aca381984d8ebbeb207ece82a1c275577
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:07:10 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:50 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 15:05:26 2008 +0100
+
+ ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
+
+ This patch adds basic support for the AMCC 460EX/460GT PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 56e410178375d9f20be25fb24e180974f0ae120b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:07:57 2008 +0100
+
+ ppc4xx: interrupt.c reworked
+
+ This patch is a rework of the 4xx interrupt handling done while
+ adding the 460EX/GT support. Interrupts are needed on 4xx for the
+ EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 22:01:57 2008 +0100
+
+ ppc4xx: program_tlb now uses 64bit physical addess
+
+ This patch changes the physical addess parameter from 32bit to 64bit.
+ This is needed for 36bit 4xx platforms to access areas located
+ beyond the 4GB border, like SoC peripherals (EBC etc.).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3307fa186af85771924c434997089b8104c0a46
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 21:58:25 2008 +0100
+
+ ppc4xx: miiphy.c reworked
+
+ While adding the 460EX/GT support I reworked the 4xx miiphy code. It
+ badly neede some cleanup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 19 16:21:49 2008 +0100
+
+ rtc: Add M41T62 support
+
+ This patch add support for the STM M41T62 RTC. It is used and tested
+ on the AMCC Canyonlands 406EX platform.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 217d383e201adc7f2271145ae345ea5eae2b7170
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:43 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board specific files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:42 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board config file
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit b05f35436b733a240559e77e46bed8439665ecc5
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:46:41 2008 +0100
+
+ ppc4xx: Add 405GPr based MCU25 board. Global files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:02 2008 +0100
+
+ ppc4xx: HCU4/5. remove obsolete hcu_flash.c
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit a079494853cc2bfeddb26673219db0b4b2b31566
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Feb 25 18:37:01 2008 +0100
+
+ ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
+
+ Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
+ the FLASH_CFI_LEGACY et al. config options.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e4170e5a50c8110f792bc37472833ae669d69951
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 11 13:52:25 2008 +0100
+
+ ppc4xx: Fix comment in 405EX DDR2 init code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Mar 14 16:22:34 2008 +0100
+
+ Add MD5 support to the new uImage format
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 0ede0c383530a418cf98be9122371a86573cd0db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Mar 14 16:22:34 2008 +0100
+
+ Add the MD5 algorithm
+
+ MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
+ calculated using the md5() function -- see include/md5.h for details.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Mar 14 16:04:54 2008 +0100
+
+ tools/setlocalversion: use a git-describe-ish format
+
+ Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
+ where 'nnnnn' is the number of commits since the last tag (i.e.,
+ 1.3.2-rc3). This makes it much easier to recognize "newer" versions
+ and to see how much has been changed since the referenced tag.
+
+ Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6dc21c84de0f159a1752c5ebd33cff843f63609
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:32:03 2008 +0100
+
+ HMI1001: add support for MPC5200 Rev. B processors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 13 14:29:49 2008 +0100
+
+ TQM5200: remove dead code
+
+ This board never used a MGT5100 processor.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 12:14:15 2008 +0100
+
+ [new uImage] Fix build issue on ARM
+
+ ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3310c549a73a949430bfda90876df7552a1dab0c
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 12:13:13 2008 +0100
+
+ [new uImage] Add new uImage format documentation and examples
+
+ Create doc/uImage.FIT documentation directory with the following files:
+ - command_syntax_extensions.txt : extended command syntax description
+ - howto.txt : short usage howto
+ - source_file_format.txt : internal new uImage format description
+
+ Add example image source files:
+ - kernel.its
+ - kernel_fdt.its
+ - multi.its
+
+ Update README appropriately.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1ec73761d2e247078f4520a265d463e8b73391a2
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:52 2008 +0100
+
+ [new uImage] Fix definition of common bootm_headers_t fields
+
+ verify, autostart and lmb fields are used regardless of CONFIG_FIT
+ setting, move their definitions to common section.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1d1cb4270edc6a99276834064069717f9782c491
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:51 2008 +0100
+
+ [new uImage] Fix build problems on trab board
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f773bea8e11f4a11c388dcee956b2444203e6b65
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:35:46 2008 +0100
+
+ [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
+
+ Save FIT configuration provied in the first bootm argument and use it
+ when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
+ arguments are not specified.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] More verbose kernel image uncompress error message
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Use show_boot_progress() for new uImage format
+
+ This patch allocates a set of show_boot_progress() IDs for new uImage format
+ and adds show_boot_progress() calls in new uImage format handling code.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Add new uImage fromat support to fpga command
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:01 2008 +0100
+
+ [new uImage] Add new uImage format handling to other bootm related commands
+
+ Updated commands:
+
+ docboot - cmd_doc.c
+ fdcboot - cmd_fdc.c
+ diskboot - cmd_ide.c
+ nboot - cmd_nand.c
+ scsiboot - cmd_scsi.c
+ usbboot - cmd_usb.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to imgextract command
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to autoscript routine
+
+ autoscript() routine is updated to accept second argument, which
+ is only used for FIT images and provides a FIT subimage unit name.
+
+ autoscript() routine callers must now pass two arguments. For
+ non-interactive use (like in cmd_load.c, cmd_net.c), new environment
+ variable 'autoscript_uname' is introduced and used as a FIT
+ subimage unit name source.
+
+ autoscript command accepts extended syntax of the addr argument:
+ addr:<subimg_uname>
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit cd7c596e9f561dbbc17b717277438aee78cde14f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:33:00 2008 +0100
+
+ [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
+
+ This patch updates architecture specific implementations of
+ do_bootm_linux() adding new uImage format handling for
+ operations like get kernel entry point address, get kernel
+ image data start address.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 3dfe110149311425919e6d6a14b561b4207498f1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:32:59 2008 +0100
+
+ [new uImage] Add node offsets for FIT images listed in struct bootm_headers
+
+ This patch adds new node offset fields to struct bootm_headers
+ and updates bootm_headers processing code to make use of them.
+ Saved node offsets allow to avoid repeating fit_image_get_node() calls.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit bc8ed486b125452ba3bd8344f052f437329150c5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:32:53 2008 +0100
+
+ [new uImage] ppc: Add new uImage format support to FDT handling routines
+
+ Support for new (FIT) format uImages is added to powerpc specific
+ boot_get_fdt() routine which now recognizes, sanity checks FIT image
+ and is able to access data sections of the requested component image.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit a44a269a905f924b420020506a4d7d7eedcc0eaf
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:14:57 2008 +0100
+
+ [new uImage] Re-enable interrupts for non automatic booting
+
+ Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
+ environment variable is not set to 'yes'.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d985c8498c4e47095820da97aa722381d39172c5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:14:38 2008 +0100
+
+ [new uImage] Remove unnecessary arguments passed to ramdisk routines
+
+ boot_get_ramdisk() and image_get_ramdisk() do not need all
+ cmdtp, flag, argc and argv arguments. Simplify routines definition.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c87796483bc7c2900470dc747c367f602577608d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:12:37 2008 +0100
+
+ [new uImage] Add new uImage format support for ramdisk handling
+
+ This patch updates boot_get_ramdisk() routine adding format
+ verification and handling for new (FIT) uImages.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Mar 12 10:01:05 2008 +0100
+
+ [new uImage] Add new uImage format support for kernel booting
+
+ New format uImages are recognized by the bootm command,
+ validity of specified kernel component image is checked and
+ its data section located and used for further processing
+ (uncompress, load, etc.)
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Mar 11 12:35:20 2008 +0100
+
+ [new uImage] Add new uImage format support for imls and iminfo commands
+
+ imls and iminfo can now recognize nad print out contents of the new (FIT)
+ format uImages.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Mar 11 12:34:47 2008 +0100
+
+ [new uImage] Add support for new uImage format to mkimage tool
+
+ Support for the new uImage format (FIT) is added to mkimage tool.
+ Commandline syntax is appropriately extended:
+
+ mkimage [-D dtc_options] -f fit-image.its fit-image
+
+ mkimage (together with dtc) takes fit-image.its and referenced therein
+ binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
+ final image that can be transferred to the target (e.g., via tftp) and then
+ booted using the bootm command in U-Boot.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eb6175edd6c120d8b89678243e5a2be362ee8e40
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Mar 10 17:53:49 2008 +0100
+
+ [new uImage] Make node unit names const in struct bootm_headers
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 21:24:06 2008 +0100
+
+ [new uImage] New uImage low-level API
+
+ Add FDT-based functions for handling new format component images,
+ configurations, node operations, property get/set, etc.
+
+ fit_ - routines handling global new format uImage operations
+ like get/set top level property, process all nodes, etc.
+ fit_image_ - routines handling component images subnodes
+ fit_conf_ - routines handling configurations node
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 30f1806f60978d707b0cff2d7bf89d141fc24290
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 16:20:02 2008 +0100
+
+ Release v1.3.2
+
+ Update CHANGELOG for release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 9 14:52:11 2008 +0100
+
+ SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit db695b78515ddb88a2d4f3357c120345efbf59ec
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 9 10:44:01 2008 +0100
+
+ scb9328: Fix flash warning: type qualifiers ignored on function return type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:50:41 2008 +0100
+
+ esd/common/fpga.c: fix indentation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cc3843e36453e2b8db65d7e56de938ba045016a0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:33:31 2008 +0100
+
+ common/kgdb.c: fix 'dereferencing type-punned pointer' warning
+
+ and get rid of a couple of unneeded casts.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 10:09:53 2008 +0100
+
+ esd/common/fpga.c: fix 'assignment of read-only location' error
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c6fe4dabac066e8758345d249032768496983a3e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 02:13:19 2008 +0100
+
+ Makefile: make build silently again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 76babc86576f092573599334c85ec543fdbc6015
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 02:07:49 2008 +0100
+
+ m501sk: Fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 9 00:06:09 2008 +0100
+
+ ADS5121: fix out of tree build
+
+ and simplify Makefile a bit.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 8 22:35:31 2008 +0100
+
+ Release v1.3.2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78a90f827df74520e939c794fc7413dace21c4db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 8 22:35:04 2008 +0100
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 8 21:30:04 2008 +0100
+
+ esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d75469d48c05795144f4b8ba76addbb4920a7bba
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sat Mar 8 09:25:49 2008 +0900
+
+ net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
+
+ When rtl_recv() of rtl8169 is called, OWNbit of status register
+ is not enable occasionally.
+ rtl_recv() doesn't work normally when the driver doesn't do
+ appropriate processing.
+ This patch fix this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 7 08:15:28 2008 +0100
+
+ mgsuvd: update board configuration
+
+ initialize the UPIOx controller.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Mar 7 08:13:41 2008 +0100
+
+ mgcoge: update board configuration
+
+ add support for the config Flash.
+ initialize the UPIOx controller.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 7 12:27:31 2008 -0600
+
+ mpc83xx: make dtb basename file references equal those of linux
+
+ the dts file basenames were updated in linux - this helps avoid
+ inadvertently loading any old dtbs laying around.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 27 16:08:22 2008 -0600
+
+ net: uec_phy: actually increment the timeout counter
+
+ allow u-boot to recover (and, e.g., switch to another interface) in the
+ case where a PHY does not report autonegotiation is complete within its
+ two second timeout value.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 772003e43957ee0c895abed7cd82cbe72820cbb8
+Author: Markus Brunner <super.firetwister@googlemail.com>
+Date: Wed Mar 5 21:38:12 2008 +0100
+
+ fix taihu soft spi_read
+
+ The taihu board used gpio_read_out_bit which reads the output register and not
+ the pin state.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+
+commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 7 08:01:43 2008 +0100
+
+ ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bd4458cb47abecabd406b1210457be96c69fc49d
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Mar 4 16:59:22 2008 +0800
+
+ 837xEMDS: Improve the system performance
+
+ 1. Make the CSB bus pipeline depth as 4, and enable
+ the repeat mode;
+ 2. Raise the eTSEC emergency priority;
+ 3. Use the highest IP blocks clock.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Mar 6 16:45:53 2008 +0100
+
+ Replace "run load; run update" with conditionalized "run load update".
+
+ The latter version stops when "run load" fails for whatever reasons
+ rendering the combination *a lot* more secure.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 6bc113886d7d316df1a4e459bec8baf027518551
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 4 17:40:41 2008 +0100
+
+ net: Print error message upon net usage when no ethernet-interface is found
+
+ This patch fixes a problem seen on PPC4xx boards, when no MAC address is
+ defined. Then no ethernet interface is available but a simple "tftp"
+ command will return without any error message which is quite confusing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a30a549a3553032d809e0356306b62de0b125901
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 4 10:03:03 2008 -0600
+
+ Remove erroneous or extra spd.h #includers.
+
+ Many of the spd.h #includers don't need it,
+ and wanted to have spd_sdram() declared instead.
+ Since they didn't get that, some also had open
+ coded extern declarations of it instead or as well.
+ Fix it all up by using spd_sdram.h where needed.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a4475386cef14af3fd88f0518b688e755669486d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 17:41:28 2008 +0100
+
+ PCS440EP: fix build problems (redundant #define)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 4 17:39:25 2008 +0100
+
+ net: Print error message upon net usage when no ethernet-interface is found
+
+ This patch fixes a problem seen on PPC4xx boards, when no MAC address is
+ defined. Then no ethernet interface is available but a simple "tftp"
+ command will return without any error message which is quite confusing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 17:38:50 2008 +0100
+
+ W7OLMC/W7OLMG: fix build problems (redundant #define)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f9301e1cda296245ba052d7b08321199c3d0af9d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 14:58:31 2008 +0100
+
+ Makefile: fix problem with out-of-tree builds introduced by 5013c09f
+
+ Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
+ problem for out-of-tree builds which caused "make clean" to fail.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dfece9500556bed5d8244b1c15d973cec7c25bfe
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 4 11:58:26 2008 +0100
+
+ examples/Makefile: build "hello_world" on 8xx, too.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 74eb0222594fd23aafdf168e60e872814eea8b62
+Author: Mike Nuss <mike@terascala.com>
+Date: Mon Mar 3 15:27:05 2008 -0500
+
+ PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
+
+ Every now and then a Sequoia board (or equivalent hardware) had
+ problems connecting to a Gigabit capable network interface.
+
+ There were differences in the PHY setup between Linux and U-Boot.
+
+ This patch fixes the problem. Apparently "remote fault" is being set,
+ which signals to some devices (on the other end of the cable) that a
+ fault has occurred, while other devices ignore it. I believe the RF bit
+ was causing the issue, but I removed T4 also, to match up with Linux.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+
+commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Mar 3 09:58:52 2008 -0600
+
+ fix QE firmware uploading limit
+
+ Fix a typo in qe_upload_firmware() that prevented uploading firmware on
+ systems with more than one RISC core.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
+Author: Bernhard Nemec <bnemec@ganssloser.com>
+Date: Mon Mar 3 11:57:23 2008 +0000
+
+ Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
+
+ Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
+ see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
+
+ Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
+
+commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
+Author: Kim B. Heino <Kim.Heino@bluegiga.com>
+Date: Mon Mar 3 10:39:13 2008 +0200
+
+ fix copy from ram to dataflash
+
+ If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
+ routines instead of dataflash. This is because it checks "if source
+ address is not dataflash" instead of target address.
+
+ Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
+
+commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 3 12:16:44 2008 +0100
+
+ Fix quoting problem (preboot setting) in many board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 3 12:36:49 2008 +0100
+
+ ADS5121: Fix default environment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 2 16:12:31 2008 +0100
+
+ Makefile: Fix missing unconfig and mkconfig use
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
+Author: michael <trimarchi@gandalf.sssup.it>
+Date: Sun Mar 2 23:33:46 2008 +0100
+
+ Fix checking fat32 cluster size.
+
+ This fixes the cluster size tests in the FAT32 file system.
+ The current implementation of VFAT support doesn't work if the
+ referred cluster has an offset > 16bit representation, causing
+ "fatload" and "fatls" commands etc. to fail.
+
+ Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
+
+commit 661bad63a076a96c39c64f136915f146725af92b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 2 22:57:23 2008 +0100
+
+ Prepare v1.3.2-rc2 release candidate
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 76957cb3d621bf664311908e5962e151c633c285
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 1 12:11:40 2008 +0100
+
+ ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
+
+ The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
+ currently 4k/2k is configured. This patch fixes this issue.
+
+ Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 118978c8eb43803e2794233922df4249fa278b83
+Author: Woodruff, Richard <r-woodruff2@ti.com>
+Date: Fri Feb 29 17:34:35 2008 -0600
+
+ Fix alignment error on ARM for modules
+
+ Fix alignment fault on ARM when running modules. With out an explicit
+ linker file gcc4.2.1 will half word align __bss_start's value. The word
+ dereference will crash hello_world.
+
+ signed-off-by Richard Woodruff <r-woodruff2@ti.com>
+
+commit ce1120dd703e6f12c59e4eba9962356a0300b832
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Feb 29 17:45:31 2008 +0800
+
+ fs: Fix ext2 read issue
+
+ The ext2 aligned process will corrupt the key
+ data struct, the patch fix this.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 2 22:45:33 2008 +0100
+
+ Makefile: cleanup "clean" target
+
+ Make sure CDPATH settings cannot interfere.
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ffda586fc1373243c9794babde69500f6293a8d8
+Author: Li Yang <leoli@freescale.com>
+Date: Fri Feb 29 11:46:05 2008 +0800
+
+ add cscope build target
+
+ Add cscope build target to generate cscope database for code browsing.
+
+ Signed-off-by: Li Yang <leoli@freescale.com>
+
+commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 27 15:06:39 2008 -0600
+
+ net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
+
+ erratum 5.6 states the autoneg completion bit is functional only if the
+ autoneg bit is asserted.
+
+ This fixes any secondarily-issued networking commands on non-gigabit
+ links on the mpc8360 mds board.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5f91db7f582ca17b1f19f10189c025696f333d2e
+Author: John Rigby <jrigby@freescale.com>
+Date: Tue Feb 26 09:38:14 2008 -0700
+
+ MPC5121e ADS PCI support take 3
+
+ Adds PCI support for MPC5121
+
+ Tested with drivers/net/rtl8139.c
+
+ Support is conditional since PCI on old silicon does not work.
+
+ ads5121_PCI_config turns on PCI
+
+ In this version, condition compilation of PCI code has been moved
+ from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
+ suggested by Jean-Christophe PLAGNIOL-VILLARD
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 44b4dbed4133f657705b7c5193209da9978243a7
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 23:53:07 2008 +0100
+
+ Fix warnings while compilation of post/drivers/memory.c
+
+ Fix warnings while compilation with new gcc in eldk-4.2
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 20:54:04 2008 +0100
+
+ ppc4xx: Fix problem in 4xx_enet.c driver
+
+ U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
+ enabled. To reproduce the problem ensure that 'ethrotate'
+ environment variable isn't set to "no" and then run
+ "tftp 200000 not_existent_file".
+ This patch tries to fix the issue.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 20:04:20 2008 +0100
+
+ POST: Disable cache while SPR POST
+
+ Currently (since commit b2e2142c) u-boot crashes on
+ sequoia board while SPR test if CONFIG_4xx_DCACHE is
+ enabled. This patch disables the cache while SPR test.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 17:52:40 2008 +0100
+
+ TQM5200: use automatic fdt memory fixup (part 2)
+
+ Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
+ TB5200 and TB5200_B to fixup the /memory node with the memory values
+ detected by U-Boot.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 44ceec253ea941b301abf4b079d52324def69d92
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 15:17:05 2008 +0100
+
+ TQM5200: use automatic fdt memory fixup
+
+ Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
+ TB5200 and TB5200_B to fixup the /memory node with the memory values
+ detected by U-Boot.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 13:27:52 2008 +0100
+
+ TQM5200: fix bug in SDRAM initialization code
+
+ This patch fixes a bug in the SDRAM initialization code for the
+ TQM5200. The hi_addr bit is now set correctly. Without this patch
+ the hi_addr bit is always set to 1, if the second SDRAM bank is
+ not populated.
+
+ For other MPC5200 boards a correspondig patch has already been applied
+ some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ --
+ Forget the first patch please. I confused flash with SDRAM in
+ the comment ...
+
+commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:12 2008 +0100
+
+ mx1fs2/flash: Fix multiple compiler warnings
+
+ "pointer targets in assignment differ in signedness"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:11 2008 +0100
+
+ arm-imx: Fix register definitions
+
+ Sync register definitions with linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:10 2008 +0100
+
+ actua1/actua2/actua3: Fix multiple unused variable warnings
+
+ - actua1:
+ actux1.c: In function 'checkboard':
+ actux1.c:92: warning: unused variable 'revision'
+
+ - actua2:
+ actux2.c: In function 'checkboard':
+ actux2.c:100: warning: unused variable 's'
+ actux2.c:99: warning: unused variable 'revision'
+ actux2.c: In function 'reset_phy':
+ actux2.c:130: warning: unused variable 'i'
+
+ - actua3:
+ actux3.c: In function 'checkboard':
+ actux3.c:114: warning: unused variable 'revision'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Feb 24 11:44:29 2008 +0900
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+
+ The previous patch was lacking of i386, microblaze, nios and nios2. This
+ patch tries to fix them.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 22:22:46 2008 +0100
+
+ [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
+
+ Do not use global fdt blob pointer, calculate blob size from routine
+ argument blob pointer.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d1cc52879c8966507dad9fb575481e6d3985e64e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Feb 12 00:58:31 2008 +1100
+
+ libfdt: Add and use a node iteration helper function.
+
+ This patch adds an fdt_next_node() function which can be used to
+ iterate through nodes of the tree while keeping track of depth. This
+ function is used to simplify the iteration code in a lot of other
+ functions, and is also exported for use by library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 8cf30809a82902a471866d2f07725ce3b8a22291
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 29 16:00:24 2008 +0100
+
+ [new uImage] Add libfdt support to mkimage
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 29 16:00:23 2008 +0100
+
+ [new uImage] Add sha1.o object to mkimage binary build
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit df6f1b895c997978f03afe04502ee76b7ba34ab9
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 16:00:06 2008 +0100
+
+ [new uImage] Fix component handling for legacy multi component images
+
+ Use uint32_t when accessing size table in image_multi_count() and
+ image_multi_getimg() for multi component images.
+
+ Add missing uimage_to_cpu() endianness conversion.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 15:59:59 2008 +0100
+
+ [new uImage] Share common uImage code between mkimage and U-boot
+
+ This patch adds the following common routines:
+
+ 1) Dedicated mkimage print_header() is replaced with common
+ image_print_contents()
+ image_print_contents_noindent()
+
+ 2) Common os/arch/type/comp fields name <--> id translation routines
+ genimg_get_os_name()
+ genimg_get_arch_name()
+ genimg_get_type_name()
+ genimg_get_comp_name()
+ genimg_get_os_id()
+ genimg_get_arch_id()
+ genimg_get_type_id()
+ genimg_get_comp_id()
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Feb 29 14:58:34 2008 +0100
+
+ [new uImage] Update naming convention for bootm/uImage related code
+
+ This patch introduces the following prefix convention for the
+ image format handling and bootm related code:
+
+ genimg_ - dual format shared code
+ image_ - legacy uImage format specific code
+ fit_ - new uImage format specific code
+ boot_ - booting process related code
+
+ Related routines are renamed and a few pieces of code are moved around and
+ re-grouped.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:51 2008 -0600
+
+ [new uImage] Respect autostart setting in linux bootm
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:50 2008 -0600
+
+ [new uImage] Provide ability to restrict region used for boot images
+
+ Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
+ to restrict what memory range is used for bootm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:49 2008 -0600
+
+ [new uImage] Use lmb for bootm allocations
+
+ Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
+ functions over to using lmb for allocation of the ramdisk, command line
+ and kernel bd info.
+
+ Convert PPC specific fdt_relocate() to use lmb for allocation of the device
+ tree.
+
+ Provided a weak function that board code can call to do additional
+ lmb reserves if needed.
+
+ Also introduce the concept of bootmap_base to specify the offset in
+ physical memory that the bootmap is located at. This is used for
+ allocations of the cmdline, kernel bd, and device tree as they should
+ be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f5614e7926863bf0225ec860d9b319741a9c4004
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:48 2008 -0600
+
+ [new uImage] Add autostart flag to bootm_headers structure
+
+ The autostart env variable was dropped as part of the initial new uImage
+ cleanup. Add it back here so the arch specific code can decide if it
+ wants to really boot or not.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:47 2008 -0600
+
+ [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
+
+ Introduce the LMB lib used on PPC in the kernel as a clean way to manage
+ the memory spaces used by various boot images and structures. This code
+ will allow us to simplify the code in bootm and its support functions.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 19 22:03:47 2008 -0600
+
+ [new uImage] ppc: Allow boards to specify effective amount of memory
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capable of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:46 2008 -0600
+
+ [new uImage] rework error handling so common functions don't reset
+
+ Changed image_get_ramdisk() to just return NULL on error and have
+ get_ramdisk() propogate that error to the caller. It's left to the
+ caller to call do_reset() if it wants to.
+
+ Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
+ to a common location. In the future we will change get_fdt() and
+ fdt_relocate() to return success/failure and not call do_reset() at all.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d2bc095a639672def11d5d043b5688d0dbd692ec
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:45 2008 -0600
+
+ [new uImage] ppc: Re-order ramdisk/fdt handling sequence
+
+ Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
+ however it does mean we have to go in and fixup the initrd info since
+ we don't know where it will be.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 27953493ef025fb698d68c5dee39b36f01f4d530
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:44 2008 -0600
+
+ [new uImage] ppc: Determine if we are booting an OF style
+
+ If we are bootin OF style than we can skip setting up some things
+ that are used for the old boot method.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 21:51:43 2008 -0600
+
+ [new uImage] Don't pass kdb to ramdisk_high since we may not have one
+
+ We don't actually need the kdb param as we are just using it to get
+ bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
+ boot via OF we might not actually fill out a kdb.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 16:30:47 2008 -0600
+
+ 85xx: Don't icbi when unlocking the cache
+
+ There is no reason to icbi when invalidating the temporary stack in
+ the d-cache. Its impossible on e500 to have the i-cache contain
+ any addresses in the temp stack and it can be problematic in generating
+ transactions on the bus to non-valid addresses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 27 15:50:50 2008 -0600
+
+ Fix source for ECM error IVPR
+
+ The source vector for the ECM was being set to 2,
+ but that's what the source vector for DDR was being
+ set to. Change it to 1.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 27 14:29:58 2008 -0600
+
+ Invalidate INIT_RAM TLB mappings
+
+ Commit 0db37dc... (and some others) changed the INIT_RAM TLB
+ mappings to be unguarded. This collided with an existing "bug"
+ where the mappings for the INIT_RAM were being kept around.
+ This meant that speculative loads to those addresses were
+ succeeding in the TLB, and going out to the bus, where they
+ were causing an exception (there's nothing at that address). The
+ Flash code was coincidentally causing such a speculative load.
+ Rather than go back to mapping the INIT RAM as guarded, we fix
+ it so that the entries for the INIT_RAM are invalidated. Thus
+ the speculative loads will fail in the TLB, and have no effect.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 22:56:17 2008 +0100
+
+ sbc8548: Fix Revision reading and unused variable 'path'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 495d162374c472f46454453553382ad0735dc725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 22:56:16 2008 +0100
+
+ sbc8548: Fix cfi flash bank declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4efbe9dbb129f857f27856936112c8c02f016be6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:26 2008 +0100
+
+ [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
+
+ Dual format image code must properly handle all three FDT passing methods:
+ - raw FDT blob passed
+ - FDT blob embedded in the legacy uImage
+ - FDT blob embedded in the new uImage
+
+ This patch enables proper raw FDT handling when no FIT imaeg support
+ is compiled in. This is a bit tricky as we must dected FIT format even
+ when FIT uImage handling is not enabled as both FIT uImages and raw FDT
+ blobs use tha same low level format (libfdt).
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:26 2008 +0100
+
+ [new uImage] POWERPC: Add image_get_fdt() routine
+
+ FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
+ (3) or embedded in the new uImage. For the (2) case embedding image must be
+ verified before we get FDT from it. This patch factors out legacy image
+ specific verification routine to the separate helper routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1efd43601f90de21ec6c0ebb9880823e822927b1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:02:07 2008 +0100
+
+ [new uImage] Add image_get_kernel() routine
+
+ Legacy image specific verification is factored out to a separate helper
+ routine to keep get_kernel() generic and simple.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:01:04 2008 +0100
+
+ [new uImage] Move image verify flag to bootm_headers structure
+
+ Do not pass image verification flag directly to related routines.
+ Simplify argument passing and move it to the bootm_header structure which
+ contains curently processed image specific data and is already being passed
+ on the argument list.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 823afe7cefe00dafefc6696c1cc7aa828c394234
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:00:47 2008 +0100
+
+ [Makefile] Sort COBJS in lib_<arch> Makefiles
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Feb 27 11:00:47 2008 +0100
+
+ [new uImage] Optimize gen_get_image() flow control
+
+ When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
+ to do, update its control flow to better reflect that simple case.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Feb 4 08:28:17 2008 +0100
+
+ [new uImage] POWERPC: Split get_fdt() into get and relocate routines
+
+ PPC specific FDT blob handling code is divided into two separate routines:
+
+ get_fdt() - find and verify a FDT blob (either raw or image embedded)
+ fdt_relocate() - move FDT blob to within BOOTMAP if needed
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Feb 25 13:13:37 2008 -0600
+
+ 86xx: Fix renamed GUR symbols in sbc8641d board.
+
+ Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
+ (86xx: Fix GUR PCI config registers properly), we should have
+ changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
+ symbols in the sbc8641d board as well. Fix this oversight.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64cd594e623c39f73964d18787763e4533f791f7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 25 16:50:48 2008 +0100
+
+ ppc4xx: Fix acadia_nand build problem
+
+ Don't include testdram() on NAND-booting target acadia_nand. This saves
+ a few bytes and makes the target build clean again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 14e099e698d41e8179d05c2b2dbcf704a236f748
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:12 2008 +0000
+
+ mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 724902c8464e610642b3a170278b99710325888e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:11 2008 +0000
+
+ arm-imx: Fix registers definition
+
+ Sync registers definition with linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4cd288b589ea1178947c6e364453c32b3dede6b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:10 2008 +0000
+
+ actua1/actua2/actua3: Fix multipleunused variable
+
+ - actua1:
+ actux1.c: In function 'checkboard':
+ actux1.c:92: warning: unused variable 'revision'
+
+ - actua2:
+ actux2.c: In function 'checkboard':
+ actux2.c:100: warning: unused variable 's'
+ actux2.c:99: warning: unused variable 'revision'
+ actux2.c: In function 'reset_phy':
+ actux2.c:130: warning: unused variable 'i'
+
+ - actua3:
+ actux3.c: In function 'checkboard':
+ actux3.c:114: warning: unused variable 'revision'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d5934ad7756f038a393a9cfab76a4fe306d9d930
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Feb 4 08:28:09 2008 +0100
+
+ [new uImage] Add dual format uImage support framework
+
+ This patch adds framework for dual format images. Format detection is added
+ and the bootm controll flow is updated to include cases for new FIT format
+ uImages.
+
+ When the legacy (image_header based) format is detected appropriate
+ legacy specific handling is invoked. For the new (FIT based) format uImages
+ dual boot framework has a minial support, that will only print out a
+ corresponding debug messages. Implementation of the FIT specific handling will
+ be added in following patches.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit b29661fc1151077776454288051bc9a488351ce8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 24 15:21:36 2008 +0100
+
+ Coding style cleanup. Prepare v1.3.2-rc2 release candidate
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 00b48a48424894daa589d166d73277830b1c6ac4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Feb 23 12:15:56 2008 +0100
+
+ ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b075d74efb70ff68c49a2532f26b56d6703b69c1
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:24:16 2008 +0900
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+
+ ----------------------------------------------------------------
+ Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
+ 32bit targets.
+
+ GCC can be made to warn about usage of long long types with ISO C90
+ (-ansi), but only with -pedantic. You can write this in a way that even
+ then it doesn't cause warnings, namely by:
+
+ #ifdef __GNUC__
+ __extension__ typedef __signed__ long long __s64;
+ __extension__ typedef unsigned long long __u64;
+ #endif
+
+ The __extension__ keyword in front of this switches off any pedantic
+ warnings for this expression.
+
+ Signed-off-by: Olaf Hering <olh@suse.de>
+ Cc: <linux-arch@vger.kernel.org>
+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+ ----------------------------------------------------------------
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 208acd112e6517b21fc30c420396902b103563ac
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:07:57 2008 +0900
+
+ cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
+
+ This will reduce the build time.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:05:00 2008 +0900
+
+ cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
+
+ This will reduce the build time.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 16:58:41 2008 +0900
+
+ cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
+
+ This reduces the build time by ~10%. Here's the gth2_config example.
+
+ BEFORE AFTER
+ real 0m31.441s 0m27.833s
+ user 0m24.766s 0m23.045s
+ sys 0m10.425s 0m7.468s
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
+Author: Marcel Moolenaar <marcelm@juniper.net>
+Date: Fri Feb 22 10:48:07 2008 -0800
+
+ make define2mk.sed work on FreeBSD
+
+ In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
+ the define2mk.sed script was identified as the source of the link
+ failure on FreeBSD. The problem is that sed(1) does not always support
+ the '+' operator. It isn't on FreeBSD. The attach patch implements the
+ equivalent, using the '*' operator instead and should work everywhere.
+
+ Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
+
+commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Feb 22 17:21:32 2008 +0100
+
+ Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
+
+ The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
+ final traces of long-deprecated "ramdisk" kernel parm") makes these
+ changes neccessary.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Feb 21 13:58:16 2008 -0500
+
+ LM75 bug fix for negative temperatures
+
+ When the LM75 temperature sensor measures a temperature below 0 C, the
+ current driver does not perform sign extension, so the result returned is
+ 256 C too high. This patch fixes the problem.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 5a910c224b13e413bda41922379add6d75c32da3
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 21 18:33:45 2008 +0100
+
+ IDS8247: update MAINTAINER entry.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 21 18:31:15 2008 +0100
+
+ Fix device tree for mgsuvd board.
+
+ Rename the "scc" node in "ethernet" for the mgsuvd board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Feb 21 14:23:42 2008 +0100
+
+ lwmon5: enable hardware watchdog
+
+ Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
+ causing it to reboot the board if U-Boot does a long busy-wait with
+ udelay(). Thus, for these boards we have to restart WD more
+ frequently.
+
+ This patch splits the busy-wait udelay() into smaller, predefined,
+ intervals, so that the watchdog timer may be resetted with the
+ configurable (CONFIG_WD_PERIOD) interval.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 21 12:52:29 2008 +0100
+
+ ppc4xx: Support for ATI Radeon 9200 card on sequoia
+
+ Adds configuration option for ATI Radeon 9200 card
+ support to sequoia config file. If CONFIG_VIDEO
+ is enabled, TEXT_BASE should be changed to 0xFFF80000.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 18 08:18:07 2008 -0600
+
+ Remove duplicate defines for ARRAY_SIZE
+
+ A few duplicate of the ARRAY_SIZE macro sneaked in since we put
+ the define in common.h.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 18 08:09:37 2008 -0600
+
+ ppc: Allow boards to specify effective amount of memory
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capable of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:24:13 2008 -0500
+
+ include autoconf.mk before any other .mk files
+
+ This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
+ those .mk files can have make if statements based on the current config.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:10:07 2008 -0500
+
+ error check autoconf.mk generation
+
+ If any of the steps for generating autoconf.mk fail currently, they go
+ unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
+ This is simpler and more robust than placing '|| exit $$?' after every line.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 019895a8dee71a9f00da05c03e379f45d581b0fe
+Author: Stefano Babic <sbabic@denx.de>
+Date: Mon Feb 18 08:03:51 2008 +0100
+
+ Fix bug in dependency checking
+
+ By adding VERSION_FILE to the PHONY targets the script
+ /tools/setlocalversion is always called and version_autogenerated.h
+ is replaced only if the script find a modified source file.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 98ba144ccc912eee90dd42699f023c497ce774c6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Feb 18 14:35:43 2008 +0900
+
+ Fix GPMC CS2 memory setup at apollon
+
+ It disables the current map first
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:52:46 2008 +0100
+
+ uli526x: Fix multiple differ in signedness and parentheses around comparison
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 16:58:04 2008 +0100
+
+ MIPS: Fix CFG_NO_FLASH support
+
+ - Fix flash_init call when CFG_NO_FLASH is used
+ - Remove no more needed flash.c for qemu-mips
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 02:40:18 2008 -0500
+
+ easylogo: clean up some more and add -r (rgb) support
+
+ Michael Hennerich added support for outputting an image in RGB format rather
+ than forcing YUYV all the time. This makes obvious sense if the display you
+ have takes RGB input rather than YUYV.
+
+ Rather than hack in support for options, I've converted it to use getopt and
+ cleaned up the argument parsing in the process.
+
+ Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f65c98129ccada3f7caf97d80395a95b84e911de
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 02:12:37 2008 -0500
+
+ Makefile: add target for $(LDSCRIPT)
+
+ If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
+ then change into the board directory and try and create it. This allows you
+ to generate the linker script on the fly based upon board defines (like the
+ Blackfin boards do).
+
+ There should be no regressions due to this change as the normal case is to
+ already have a u-boot.lds file. If that's the case, then there's nothing to
+ generate, and so make will always exit. The fix here is that if the linker
+ script does not exist, the implicit rules take over and attempt to guess how
+ to generate the file.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5583cbf736474ef754e128a54fb78632f57b48fd
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:27:49 2008 +0100
+
+ [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2242f5369822bc7780db95c47985bb408ea9157b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:27:41 2008 +0100
+
+ [new uImage] Rename and move print_image_hdr() routine
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:20 2008 +0100
+
+ [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
+
+ Introducing routines for parsing new uImage format bootm arguments:
+ [<addr>]#<conf> - configuration specification
+ [<addr>]:<subimg> - subimage specification
+
+ New format images can contain multiple subimages of the same type. For example
+ a single new format image file can contain three kernels, two ramdisks and a
+ couple of FDT blobs. Subimage and configuration specifications are extensions
+ to bootm (and other image-related commands) arguments' syntax that allow to
+ specify which particular subimage should be operated on.
+
+ Subimage specification is used to denote a particular subimage. Configurations
+ are a bit more complex -- they are used to define a particualr booting setup,
+ for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
+ etc.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:19 2008 +0100
+
+ [new uImage] Add gen_get_image() routine
+
+ This routine assures that image (whether legacy or FIT) is not
+ in a special dataflash storage.
+
+ If image address is a dataflash address image is moved to system RAM.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Feb 21 17:20:18 2008 +0100
+
+ [new uImage] Pull in libfdt if CONFIG_FIT is enabled
+
+ New uImage format (Flattened Image Tree) requires libfdt
+ functionality, print out error message if CONFIG_OF_LIBFDT
+ is not defined.
+
+ New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
+ This commit turns it on by default.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Mon Feb 18 23:16:35 2008 +0100
+
+ CFI: Do not use uninitialized cmd_reset
+
+ Do not use uninitialized cmd_reset; issue both AMD and Intel reset
+ commands instead
+
+ From a short test, it looks like AMD-style flash roms treat *any* unknown
+ command write as a reset, at least when in CFI Query mode, so issuing the
+ Intel reset command to AMD-style flashs seems safe (from the small sample I
+ have), plus the 3-cycle magic sequence should kick the state machine into
+ the right state even without a reset command. Since the AMD-style flashs
+ require the unlock sequence for real operation, I chose to try the AMD reset
+ command first, so that Intel flashs do no see an invalid command prior to
+ the CFI query.
+
+ I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
+ plus Intel StrataFlash.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Feb 21 11:56:44 2008 +0100
+
+ API: Add (c) and licensing notice to the public API header.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Feb 21 11:06:07 2008 +0100
+
+ Fix CPU POST test failure
+
+ The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
+ ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
+ by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
+ This patch just saves the CR value before running the test code, so allowing
+ it to do anything it wants with CR.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Acked-by: Yuri Tikhonov <yur@emcraft.com>
+ --
+
+commit d5908b093955415f3d340706378b991f911af671
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 15:26:51 2008 -0600
+
+ 8610HPCD: Document the flashbank selection switches.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a551cee99ad1d1da20fd23ad265de47448852f56
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 14:22:26 2008 -0600
+
+ 86xx: Fix GUR PCI config registers properly.
+
+ Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
+ I tried to "8610HPCD: Fix typos in two PCI setup registers", I
+ botched it due to not realizing that 8610 and 8641 had different
+ Global Utility Register defintions, one of which was like 85xx,
+ and the other wasn't. Correct this problem by introducing two
+ symbols, one for each 86xx SoC, but neither of which is named
+ anything like 85xx.
+
+ My bad. Lovely Wednesday with git bisect. You know.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cb06eb961bdffc8728b38c242473d802e83ab2b4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 12:24:11 2008 -0600
+
+ 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
+
+ Without an actual supported video card hooked up, enabling
+ the CONFIG_VIDEO by default just makes it look broken by
+ routing all console output to the video card. Don't.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d264eff4312f230776b913edade7ceb75f1b1e0
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jan 30 15:08:15 2008 -0600
+
+ ColdFire: Fix missing code flash size for M5485EVB
+
+ Signed-off-by: James Mahan <kmahan@freescale.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jan 30 15:04:42 2008 -0600
+
+ ColdFire: Fix 5282 and 5271 interrupt mask bit
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Feb 19 12:31:08 2008 -0600
+
+ 8610HPCD: Fix typos in two PCI setup registers.
+
+ The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
+ were erroneously present as 85xx names and values, leftover from
+ the clone wars. Fix this by removing the 85xx cruft from the
+ 86xx codebase.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Feb 18 14:01:56 2008 -0600
+
+ 86xx: Convert sbc8641d to use libfdt.
+
+ This is the proper fix for a missing closing brace in the function
+ ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
+ The ft_cpu_setup() function in mpc8641hpcn.c should have been
+ removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
+ but was missed. Only, the sbc8641d was nominally still using it.
+ It all got ripped out, and the funcality that was in ft_board_setup()
+ was refactored to remove the CPU portions into the new file
+ cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
+
+ Based loosely on an original patch from joe.hamman@embeddedspecialties.com
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 04efddc87c50c84f85dad5c331c634a6ce830a83
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:35:31 2008 +0100
+
+ mpc86xx: Fix unused variable 'config' and 'immap'
+
+ and remove useless CONFIG_DDR_INTERLEAVE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:03:36 2008 +0100
+
+ mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b6f29c84c208a091f95a10cbc9852d729659ba20
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:31 2008 +0100
+
+ s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:32 2008 +0100
+
+ pxa: fix assignment from incompatible pointer type
+
+ fix mmc_bread function prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 64d792063fff90b8118179b092feee09fe5cae13
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:30 2008 +0100
+
+ at91cap9adk: fix implicit declaration of function 'eth_init'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 17 15:43:44 2008 +0100
+
+ Remove files added by mistake, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
+Author: Mike Nuss <mike@terascala.com>
+Date: Wed Feb 6 11:10:11 2008 -0500
+
+ PPC440EPx: Optionally enable second I2C bus
+
+ The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
+ PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
+ code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+ Cc: Stefan Roese <sr@denx.de>
+
+commit ef5b4f221c22d05770878513951745f236b5b43f
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:44 2008 +0100
+
+ ppc4xx: HCU4/5. Cleanup configs
+
+ - hcu4.h: Removed define of CONFIG_PPC405GPr
+ - Corrected phy addresses
+ - Fix boot variables
+ - Respect line length of 80 chars
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 74973126d1be63ac75bdc192f46234dca3a7c421
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 11:31:28 2008 +0100
+
+ ppc4xx: HCU4/5. Cleanups
+
+ - Fix some coding style violations.
+ - Use in/out_u16/32 where appropriate.
+ - Use register names from ppc405.h.
+ - Fix trace useage for Lauterbach.
+ - Remove obsolete generation HCU2.
+ - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:41 2008 +0100
+
+ ppc4xx: PPC405GPr fix missing register definitions
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 214398d9cb22268d9d4f7563359edca0f78297a2
+Author: Larry Johnson <lrj@acm.org>
+Date: Fri Jan 18 21:49:05 2008 -0500
+
+ ppc4xx: Beautify configuration files for Sequoia and Korat boards
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 30c6a241e88499f536e86d325759e29ba00ff67f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Feb 15 20:09:01 2008 +0100
+
+ Wipe out assembler warnings while compiling x86 biosemu
+
+ This patch tries to get rid of some assembler warnings about
+ changed .got2 section type while compiling x86 bios emulator
+ code.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Feb 15 00:57:09 2008 +0100
+
+ Prepare v1.3.2-rc1 release candidate
+
+commit f33e9653c9c09868995d788511d573771c209fe5
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Feb 15 00:13:20 2008 +0100
+
+ Fix compile warning on lib_ppc/board.c
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 14 18:22:04 2008 +0100
+
+ Add Radeon Mobility 9200 pci device id to the radeon driver
+
+ This patch extends PCI device id table of the
+ radeon driver so that the driver will also support
+ Radeon Mobility 9200 (M9+) based boards.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 1b8607e1f7143548c6062c28371449ec69588c00
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 14 18:19:50 2008 +0100
+
+ Extend ATI Radeon driver to support more video modes
+
+ Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
+ 800x600, 640x480 at 24, 16 and 8 bpp.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4124382de029d361162a4b8cecc773eb8f26e2a8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 10 17:05:20 2008 +0100
+
+ xsengine: fix typo and few coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Fri Feb 8 21:25:58 2008 +0100
+
+ Fix wrong memory limit calculation in memory-test
+
+ If the length of the memory address range passed to the "mtest" command is
+ not of the form 2^x - 1, not all address lines are tested. This bug is
+ inherited from the original software at
+ http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
+ this.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Feb 15 00:11:39 2008 +0100
+
+ Coding STyle cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f6921e3dc331293c873ec4d109fd5517a42a90b3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Feb 5 13:30:43 2008 +0900
+
+ sh: Fix register address of SH7722
+
+ The address of SH7722 is wrong by old document.
+ This patch fixes this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 17:44:23 2008 -0500
+
+ only update version header as needed
+
+ Constantly rebuilding the version header will force useless relinking, so we
+ simply need to compare the new header with the existing one before updating
+ it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 208447f8e953f347425eb92c8e28d59e6d911363
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:56:19 2008 -0500
+
+ Do not specify a CROSS_COMPILE default when executing size
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Wed Feb 13 11:19:19 2008 +0100
+
+ Fix return value of mtest when CFG_ALT_MEMTEST set
+
+ Fix a missing return statement from a non-void function.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 9 14:35:26 2008 -0600
+
+ 85xx, 86xx: Determine I2C clock frequencies and store in global_data
+
+ Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
+
+ Update the get_clocks() function in 85xx and 86xx to determine the I2C
+ clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 23:18:01 2008 +0100
+
+ TQM834x: clean up configuration
+
+ Get board name consistent with Linux and elsewhere;
+ get rid of local network definitions etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 38cc09c55b1d7f233789052c6fc462e5377669a9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Feb 14 08:02:12 2008 +0100
+
+ TFTP: fix search of ':' in BootFile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0bc9efada170096c6b273f19165e32936d330d80
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 22:46:55 2008 +0100
+
+ Coding style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 22:43:22 2008 +0100
+
+ PPC: Use r2 instead of r29 as global data pointer
+
+ R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
+ will refuse to use load/store multiple insns; instead, it issues a
+ list of simple load/store instructions upon function entry and exit,
+ resulting in bigger code size, which in turn makes the build for a
+ few boards fail.
+
+ Use r2 instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3c234efa693bc59906c2be55c7918ecbb55392ea
+Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Date: Wed Jan 30 09:08:49 2008 +0100
+
+ ARM: make the machid configurable via the environment
+
+ If the variable "machid" exists, let do_bootm_linux use that instead
+ of bd->bi_arch_number.
+
+ Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+
+commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Jan 23 16:34:46 2008 +0200
+
+ Use #ifdef CONFIG_FSLDMAFEC
+
+ MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
+ fails
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 26c7bab81e08dc7bd696c48f753428a829629bd8
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Jan 19 10:25:59 2008 +0900
+
+ common/miiphyutil.c: Cleanup MII_DEBUG and debug()
+
+ Current MII_DEBUG is confusing in two ways. One is useless define-then-
+ undef at the top of the file. The other is there is only one debug() in
+ this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
+ While there are many useful printf()/puts() debug codes, but they are for
+ DEBUG, not for MII_DEBUG.
+
+ This patch tries to put them all together into MII_DEBUG and debug().
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 751b9b5189f3274b03c809172631316d6b002c82
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Thu Jan 17 16:43:25 2008 +0900
+
+ OneNAND Initial Program Loader (IPL) support
+
+ This patch enables the OneNAND boot within U-Boot.
+ Before this work, we used another OneNAND IPL called X-Loader based
+ on open source. With this work, we can build the oneboot.bin image
+ without other program.
+
+ The build sequence is simple.
+ First, it compiles the u-boot.bin
+ Second, it compiles OneNAND IPL
+ Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
+ The mechanism is similar with NAND boot except it boots from itself.
+
+ Another thing is that you can only use the OneNAND IPL only to work
+ other bootloader such as RedBoot and so on.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 21f6f9636f0e978397548751347425fbf8d42bb3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Jan 16 13:06:59 2008 -0600
+
+ Fix CONFIG_MMC usage in fat code
+
+ A #if statement in fat.c depended on CONFIG_MMC, instead of
+ defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
+ as "1" rather than just defined. Now it's better.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 15 12:52:31 2008 +0100
+
+ ppc: Refactor cache routines, so there is only one common set.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jan 23 15:55:02 2008 -0600
+
+ 86xx: Fix compilation warning in sys_eprom.c
+
+ sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 65230107025733e89e28fd5e5cfd916d4953c28a
+Author: Haavard Skinnemoen <hskinnemoen at>
+Date: Fri Feb 22 11:40:50 2008 +0000
+
+ Move AT91RM9200DK board support under board/atmel
+
+ We already have a vendor subdir for Atmel, so we should use it.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+
+commit 6d0943a6be99977d6d853d51749e9963d68eb192
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Jan 14 09:06:52 2008 +0000
+
+ ARM: cleanup duplicated exception handlingcode
+
+ Move duplicated exception handling code into lib_arm.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
+Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
+Date: Fri Feb 1 10:09:03 2008 +0000
+
+ Support for Artila M-501 starter kit
+
+ Kimmo Leppala / Sysart and
+ Timo Tuunainen / Sysart
+
+commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
+Author: Stelian Pop <stelian@popies.net>
+Date: Mon Feb 11 10:50:19 2008 +0000
+
+ AT91CAP9 support
+
+ ---------------------------------
+
+ read_dataflash() takes a signed char pointer as a parameter. Silence a
+ few warnings dues to incorrect parameter types in env_dataflash.c.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Feb 7 09:42:57 2008 +0000
+
+ AT91CAP9 support : move board files to Atmel vendor directory.
+
+ AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 7263ef191b87da94768f762c7093bedeb70db98f
+Author: Stelian Pop <stelian at>
+Date: Thu Jan 3 21:15:56 2008 +0000
+
+ AT91CAP9 support : MACB changes
+
+ Signed-off-by: Stelian Pop <stelian <at> popies.net>
+ Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+
+commit 6afcabf11d7321850f4feaadfee841488ace54c5
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Feb 7 16:37:54 2008 +0000
+
+ AT91CAP9 support : board/ files
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
+Author: Stelian Pop <stelian at>
+Date: Wed Jan 30 21:15:54 2008 +0000
+
+ AT91CAP9 support : cpu/ files
+
+ Signed-off-by: Stelian Pop <stelian <at> popies.net>
+
+commit fa506a926cec348805143576c941f8e61b333cc0
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Jan 31 21:15:53 2008 +0000
+
+ AT91CAP9 support : include/ files
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 20b197c6f2799af399a68f96a1aff543a75621b8
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Jan 20 19:49:21 2008 +0000
+
+ AT91CAP9 support : build integration
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Jan 20 21:07:00 2008 +0000
+
+ Improve DataFlash CS definition.
+
+ Use a structure instead of the error prone unnamed array to
+ define the possible dataflash banks.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit a6cdd21b56014208706238712a853a9e9a0a2290
+Author: Stelian Pop <stelian@popies.net>
+Date: Sat Jan 19 21:09:35 2008 +0000
+
+ Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
+
+ Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
+
+ cpu/arm926ejs/start.o: In function `cpu_init_crit':
+ .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Feb 1 16:50:24 2008 +0000
+
+ Fix timer overflow in DaVinci
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Feb 1 16:49:08 2008 +0000
+
+ Update board NetStar
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b7f6193e76651e1fd606e46eb11915b53cb6618b
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:42 2008 +0100
+
+ ppc4xx: HCU4/5. Fix make O=../xx
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
+Author: Larry Johnson <lrj@acm.org>
+Date: Tue Jan 22 08:51:59 2008 -0500
+
+ ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit fe891ecf4d187e9d11dde869ed4623af52b54451
+Author: Hiroshi Ito <ito@mlb.co.jp>
+Date: Thu Jan 31 18:35:04 2008 +0900
+
+ NFS Timeout with large files.
+
+ Retry to send NFS packet before reaching timeout.
+
+ Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
+
+commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
+Author: Johannes Stezenbach <js@sig21.net>
+Date: Tue Jan 29 00:11:25 2008 +0100
+
+ Add dependencies to avoid race conditions with parallel make.
+
+ Signed-off-by: Johannes Stezenbach <js@sig21.net>
+
+commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:46:01 2008 -0500
+
+ Mark board_init_[fr] as noreturn
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 161b2af4d7b48fd602ce333c355a4df0337892bb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:28:50 2008 -0500
+
+ Only use TEXT_BASE if defined by the board
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1b769881750030f10743808b9d6013e11f559350
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 25 07:54:47 2008 +0100
+
+ Fix remaining CONFIG_COMMANDS
+
+ update comments
+ Fix coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Jan 21 16:46:00 2008 +0100
+
+ Add *~ to .gitignore
+
+ One should never add a backup file ending in with ~ to the git repository.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 00:02:10 2008 -0600
+
+ Remove duplicate defines for ARRAY_SIZE
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c77ce474b1c57b13e9d36d9830f147966c143694
+Author: Stelian Pop <stelian@popies.net>
+Date: Mon Jan 14 22:08:14 2008 +0100
+
+ Fix incorrect address test in AT91F_DataflashSelect().
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 13 15:09:58 2008 -0600
+
+ Fix building of fdt_support.c if DEBUG set
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Feb 12 14:53:28 2008 -0600
+
+ Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
+
+ These replace direct structure references for IMMR sections.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c62776be8dca4097ca03d4f9415f08d4887b45d0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Feb 12 00:45:06 2008 +0100
+
+ Get rid of "#undef DEBUG" from board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jan 15 17:09:41 2008 -0600
+
+ Remove #undef DEBUG from MPC83xx board header files
+
+ Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
+ The inclusion of this line makes it impossible to enable debug code in
+ other source files, because "#define DEBUG" typically needs to be defined
+ before any header files are included.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 69018ce2e086e9caf35b914d675b82bc4888f077
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 08:25:45 2008 -0600
+
+ QE: Move FDT support into a common file
+
+ Move the flat device tree setup for QE related devices into
+ a common file shared between 83xx & 85xx platforms that have QE's.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5cf746c303710329f8040d9c62ee354313e3e91f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:59:09 2008 +0100
+
+ [new uImage] Move kernel data find code to get_kernel() routine
+
+ Verification of the kernel image (in old format) and finding kernel
+ data is moved to a dedicated routine. The routine will also hold
+ support for, to be added, new image format.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 7b325454fd231d4273de3fe373850f777fb086bf
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:58:20 2008 +0100
+
+ [new uImage] Cleanup FDT handling in PPC do_boot_linux()
+
+ Move FDT blob finding and relocation to a dedicated
+ get_fdt() routine. It increases code readability and
+ will make adding support for new uImage format easier.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:58:13 2008 +0100
+
+ [new uImage] Cleanup do_botm_linux() boot allocations
+
+ This patch moves common pre-boot allocation steps shared between PPC
+ and M68K to a helper routines:
+
+ common:
+ - get_boot_sp_limit()
+ - get_boot_cmline()
+ - get_boot_kbd()
+
+ platform:
+ - set_clocks_in_mhz()
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:57:17 2008 +0100
+
+ [new uImage] Move ramdisk loading to a common routine
+
+ Ramdisk loading code, including initrd_high variable handling,
+ was duplicated for PPC and M68K platforms. This patch creates
+ common helper routine that is being called from both platform
+ do_bootm_linux() routines.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:55:53 2008 +0100
+
+ [new uImage] Removed dead ramdisk code on microblaze architectures
+
+ Microblaze do_bootm_linux() includes ramdisk processing code but
+ the ramdisk does not get used anywhere later on.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5ad03eb3854c162684222a718b44c0716ea0db03
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:55:39 2008 +0100
+
+ [new uImage] Factor out common image_get_ramdisk() routine
+
+ Architecture specific do_bootm_linux() routines share common
+ ramdisk image processing code. Move this code to a common
+ helper routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:08 2008 +0100
+
+ [new uImage] Move FDT error printing to common fdt_error() routine
+
+ FDT error handling in PPC do_bootm_linux() shares the same message format.
+ This patch moves error message printing to a helper fdt_error() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 42b73e8ee00d48004791dea64b8093fb974c57e1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Factor out common routines for getting os/arch/type/comp names
+
+ Move numeric-id to name translation for image os/arch/type/comp header
+ fields to a helper routines: image_get_os_name(), image_get_arch_name(),
+ image_get_type_name(), image_get_comp_name().
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e99c26694a384221d336f6448c06a57479c0baa4
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Remove standalone applications handling from boootm
+
+ Standalone applications are supposed to be run using the "go" command.
+ This patch removes standalone images handling from the do_bootm().
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:07 2008 +0100
+
+ [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
+
+ Support for OF_FLAT_TREE is to be obsoleted in the near future,
+ remove related code from the bootm routines.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 82850f3d32a2661868ec6876bed7a22c55cef718
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Use image API in SH do_bootm_linux() routine
+
+ Introduce image handling API for lately added Hitachi SH architecture.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 4a995edec1ac163d9326d143ffe2b47e7543407f
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Rename architecture specific bootm code files
+
+ Implementation of the do_bootm_linux() and other bootm helper routines is
+ architecture specific code. As such it resides in lib_<arch> directories
+ in files named <arch>_linux.c
+
+ This patch renames those files to a more clear and accurate
+ lib_<arch>/bootm.c form.
+
+ List of the renamed files:
+ lib_arm/armlinux.c -> lib_arm/bootm.c
+ lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
+ lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
+ lib_i386/i386_linux.c -> lib_i386/bootm.c
+ lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
+ lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
+ lib_mips/mips_linux.c -> lib_mips/bootm.c
+ lib_nios/nios_linux.c -> lib_nios/bootm.c
+ lib_nios2/nios_linux.c -> lib_nios2/bootm.c
+ lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
+ lib_sh/sh_linux.c -> lib_sh/bootm.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 7582438c285bf0cef82909d0f232de64ec567a8a
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:20:06 2008 +0100
+
+ [new uImage] Return error on image move/uncompress overwrites
+
+ Check for overwrites during image move/uncompress, return with error
+ when the original image gets corrupted. Report clear message to the user
+ and prevent further troubles when pointer to the corrupted images is passed
+ to do_bootm_linux routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f13e7b2e993c61fed1f607962501e051940d6e80
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:12:17 2008 +0100
+
+ [new uImage] Cleanup image header pointer use in bootm code
+
+ - use single image header pointer instead of a set of auxilliary variables.
+ - add multi component image helper routines: get component size/data address
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:17:10 2008 +0100
+
+ [new uImage] Cleanup cmd_bootm.c
+
+ - sort and cleanup headers, declarations, etc.
+ - group related routines
+ - cleanup indentation, white spaces
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit af13cdbc01eaf88880978bfb4f603e012818ba24
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:45 2008 +0100
+
+ [new uImage] Add memmove_wd() common routine
+
+ Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 15158971f49255ccef54f0979a942cfd3de2ae52
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
+
+ Use image header copy instead of a (possibly corrupted) pointer to
+ a initial image location.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Remove I386 uImage fake_header() routine
+
+ I386 targets are not using a uImage format, instead fake header
+ is added to ram image before it is further processed by bootm.
+
+ Remove this fixup and force proper uImage use for I386.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 559316faf7eae0614c91d77f509b57d6c4c091ba
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:44 2008 +0100
+
+ [new uImage] Move CHUNKSZ definition to image.h
+
+ CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
+ move this definition to a common header.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Move gunzip() common code to common/gunzip.c
+
+ Move gunzip(), zalloc() and zfree() to a separate file.
+ Share zalloc() and zfree() with cramfs uncompress routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit d45d5a18b6b36688f2365623f9d550566c664b5b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
+
+ Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
+ readable in PPC variant of do_bootm_linux() routine.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:11:43 2008 +0100
+
+ [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
+
+ PPC implementation of do_bootm_linux() routine is moved to
+ a dedicated file lib_ppc/ppc_linux.c
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue Jan 8 18:14:09 2008 +0100
+
+ [new uImage] Define a API for image handling operations
+
+ - Add inline helper macros for basic header processing
+ - Move common non inline code common/image.c
+ - Replace direct header access with the API routines
+ - Rename IH_CPU_* to IH_ARCH_*
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit ed29bc4e8142b46b626f67524207b36e43d9aad6
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Jan 31 13:19:58 2008 +0100
+
+ Add missing cmd_ximg.o to common/Makefile
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Jan 28 10:15:02 2008 +0100
+
+ ADS5121e: DDR2 init/timing update.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ac9152830d7fdebace8a260b7737ef2870c21ca0
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Jan 30 13:36:57 2008 -0700
+
+ Device tree updates
+
+ Changes to match 5121 device tree going mainline in 2.6.25.
+
+ Change OF_SOC from "soc5121" to plain "soc".
+ Remove unneeded "ref-frequency" fixups.
+ Remove "address" enetaddr fixup.
+
+ Add bus-frequency fixup for old OF_SOC so old
+ kernels with old device trees will work with new
+ u-boot with 66MHz IPS clock
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit de55d18df3ff2ea614624e74793de7c43520e0e7
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Jan 30 13:36:56 2008 -0700
+
+ Change IPS freq to 66MHz
+
+ Recommended frequency is 66MHz
+ Change divider from 4 to 3.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 14 22:38:55 2008 +0100
+
+ xsengine: rename board_post_init to board_late_init
+
+ missing migration from "Cleanup of some init functions"
+ in c837dcb1a316745092567bfe4fb266d0941884ff
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8dafa87476b0d7170e219c2f5e3842c833a91807
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jan 12 23:35:33 2008 -0500
+
+ Add attribute POST_PREREL to ECC memory POST
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 08:25:45 2008 -0600
+
+ QE: Move FDT support into a common file
+
+ Move the flat device tree setup for QE related devices into
+ a common file shared between 83xx & 85xx platforms that have QE's.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d38da537943cd36356b9d3d9d9b60533554b81d8
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Jan 23 17:20:14 2008 +0100
+
+ AVR32: Make SDRAM refresh rate configurable
+
+ The existing code assumes the SDRAM row refresh period should always
+ be 15.6 us. This is not always true, and indeed on the ATNGW100, the
+ refresh rate should really be 7.81 us.
+
+ Add a refresh_period member to struct sdram_info and initialize it
+ properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
+ panic() until the refresh_period member is updated properly.
+
+ Big thanks to Gerhard Berghofer for pointing out this issue.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 61151cccb660cdb06a07fb283de6089913d7bde0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Apr 19 10:10:11 2007 +0200
+
+ ATSTK1000: Fix potential flash programming bug
+
+ The (now obsolete) atngw100 flash programming code was having problems
+ programming the onboard at49bv642 chip. The atstk1000 flash
+ programming code may have the same bug, so import fix for this problem
+ from the AVR32 Linux BSP.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 17:04:13 2007 +0100
+
+ ATSTK1004: Fix comment about default load address
+
+ The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
+ wouldn't have worked anyway since the board can only access 4MB of
+ SDRAM.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 8269ab53608d8db2aa06969c337ab0b0518211e5
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 17:01:24 2007 +0100
+
+ ATSTK1002: Use SDRAM + 4MB as default load address
+
+ Many people run into problems when they compile a big kernel and load
+ the uImage at the default SDRAM + 2MB address as the kernel will
+ overwrite the uImage as it is being unpacked. Increase the default
+ load address so that we can load a 4MB kernel image without any
+ problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 2bcacc2d841b77f3d2d3910db722003742727e9f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 16:51:39 2007 +0100
+
+ ATNGW100: Fix default mtest range
+
+ Let mtest cover the whole SDRAM except the last megabyte, which is
+ where u-boot lives.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jan 22 15:31:56 2008 +0900
+
+ sh: Fix register address of SH7722.
+
+ The address of SH7722 is wrong by old document.
+ This patch fixes this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ new command for displaying strings at specified memory locations
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ rewrite/cleanup Blackfin RTC driver
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ generate u-boot.ldr for Blackfin targets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b779f7a59530436040f157f7841db7ab796542df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ scrub unused symbols
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cc2977acc3bbbb7850f16645dd1081f95335868d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ move Blackfin cpu object list to respective cpu directories
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ interface to Blackfin on-chip One-Time-Programmable memory
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ add support for memory commands with Blackfin L1 instruction memory
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ use C code rather than inline assembly
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ add Blackfin-specific reginfo command
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0858b835e7ea501ea084d34cef75932f098342bb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ add support for Blackfin symbol prefixes to examples
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8dc48d71a4be753ea9f84956cd33600de35fad04
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ add Blackfin-specific bdinfo command
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ unify the Blackfin board targets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d4d7730853e5d675f76ec666807da3028c91d592
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ punt Blackfin VDSP headers and import sanitized/auto-generated ones
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ always pull in asm/blackfin.h for Blackfin ports
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add missing __raw versions of Blackfin read/write io functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add the default Blackfin logo used by Blackfin boards with splash screens
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add some more Blackfin docs
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4087bc88cebec75c432a7fe9f6afb545b0919831
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b45264ee85cbd92020640a32e02fb434fd557108
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:53 2008 -0500
+
+ add gitignores for Blackfin pieces
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 18 01:14:03 2008 +0100
+
+ TFTP: add host ip addr support
+
+ allow to use a different server as set in serverip
+ add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
+ if not defined the max length will be at 128
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e56b4b494cd92def577969f9678395aa22d34c9f
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 9 14:35:26 2008 -0600
+
+ 85xx,86xx: Determine I2C clock frequencies and store in global_data
+
+ Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
+
+ Update the get_clocks() function in 85xx and 86xx to determine the I2C
+ clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 27 10:56:54 2007 +0100
+
+ OMAP5912: fix FIFO handling in UART driver
+
+ According to the OMAP5912 Serial Interfaces Reference Guide (see
+ http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
+ FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
+ changed when the baud clock is not running, i. e. when both DLL and
+ DLH are set to 0.
+
+ Thus make sure that DLL and DLH are 0 when writing the FCR.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 15:10:52 2007 +0100
+
+ ARM: S3C24x0 SoC NAND controller support
+
+ This patch adds NAND support to the S3C24x0 SoC code in u-boot
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:24:40 2007 +0100
+
+ ARM: s3c24xx: Multiple serial port support
+
+ This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a25f72f1f73a11de68251fb88c89991e202e68fa
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:16:57 2007 +0100
+
+ ARM: arm920t: Allow use of 'gd' pointer from IRQ
+
+ This patch allows us to use the 'gd' pointer (and thus environment
+ and everything else associated with it) from interrupt context on
+ arm920t.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit be19bd5cd0f454b63298844a0b5377e029b2caad
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:19:38 2007 +0100
+
+ ARM: arm920/s3c24xx: IRQ demulitplexer callback
+
+ This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
+ plus a stub implementation of it for the S3C2410.
+
+ The purpose is to allow arm920t implementations such as the s3c24x0 to
+ implement interrupt handlers in u-boot without having to touch core
+ arm920t code.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
+Author: Hebbar <gururajakr@sanyo.co.in>
+Date: Tue Dec 18 16:03:07 2007 -0800
+
+ ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
+
+ Add ifdef to bdinfo command to display ethernet information
+ only if CONFIG_CMD_NET is defined for arm modules.
+
+ Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
+Author: Hebbar <gururajakr@sanyo.co.in>
+Date: Tue Dec 18 16:00:54 2007 -0800
+
+ ARM: add I2C init function call in lib_arm/board.c
+
+ Adds I2C init func call to init sequence for ARM boards. This is
+ present in ppc,blackfin and other processor init sequence.
+
+ Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 1 09:38:29 2008 +0100
+
+ ppc4xx: Fix ndfc HW ECC byte order
+
+ The current ndfc HW ECC implementation swaps the first two ECC bytes.
+ But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
+ so this swapping in the HW ECC driver is bogus. This patch fixes this
+ problem and now really uses the SMC ECC byte order.
+
+ Thanks to Sean MacLennan for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 30 15:35:50 2008 +0100
+
+ ppc4xx: Fix GPIO configuration for pcs440ep
+
+ The SRD0_PFC0 register was not configured correctly to enable the GPIO's
+ 49-63 for GPIO. They have been configured as trace signals. This patch
+ fixes this by clearing the corresponding bit.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 30 14:48:28 2008 +0100
+
+ ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Fri Dec 7 00:42:32 2007 +0100
+
+ ARM: Board voiceblue update
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Thu Dec 6 23:24:57 2007 +0100
+
+ ARM: AT91RM9200 based boards config cleanup
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+ Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
+ indentation.
+
+commit 481f28b1db5cd21deb55f69399ba240e107af4c7
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Thu Dec 6 22:59:16 2007 +0100
+
+ ARM: Fix at91rm9200dk base address
+
+ Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
+ renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
+ with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
+ However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
+ CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
+ I'm sending this patch 4th (!) time in hope it produces at least some
+ reaction.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+ Fix at91rm9200dk base and environment address.
+
+commit c95219fae2a7add7daa2f91aedca65b1698465c7
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Nov 20 10:40:24 2007 +0100
+
+ MMC for PXA 27X (resubmit)
+
+ MMC support for X_Scale PXA is broken and does not work.
+ Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
+ There were already some patches around the world but none of them was
+ merged into the official u-boot tree.
+
+ This patch makes order fixing this issue. Resubmit after code cleanup.
+
+ Applied and tested on PXA 270 (TrizepsIV module).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Nov 20 10:37:04 2007 +0100
+
+ Fix gcc issues in pxa-regs.h
+
+ Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
+ issues generates wrong code.
+ (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
+ This patch fixes the problem and solves the gcc-4 issues as the linux
+ kernel does.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+ Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
+
+commit 7047b388876e7b905b2ec4edb8010543e3641b85
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Jan 29 08:45:03 2008 +0100
+
+ TQM834x: enable DHCP
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Jan 29 08:45:02 2008 +0100
+
+ TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8931ab176025b03cfc320b3fd1eca432a88ed560
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jan 26 23:41:19 2008 -0500
+
+ Fix conditional compilation of mpx8xxx_spi driver
+
+ This driver should only compile if CONFIG_MPC8XXX_SPI is set
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 63f732d3d3880feb531f48af247c025bf01462b0
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 29 17:00:34 2008 +0100
+
+ API: Provide dummy halt() in the glue layer.
+
+ This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 29 16:57:38 2008 +0100
+
+ API: Convert conditional building to the new scheme.
+
+ This fixes a build breakage with CONFIG_API enabled, which appeared after
+ the recent changes in the U-Boot build system.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 98b742489c09780be6a832eeaa4e5eff824792bb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jan 25 09:56:17 2008 +0100
+
+ inka4x0: remove dead code
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:06 2008 -0600
+
+ 86xx: Add reginfo command
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit ddcebcb638715a6278da93b553d5016f99823816
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:05 2008 -0600
+
+ 86xx: Add print_laws function to fsl_law.c
+
+ This can be used for debug, and will be used by board code
+ to help implement reginfo.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:04 2008 -0600
+
+ 86xx: Remove old-style law setup code
+
+ This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 713d8186649dae874613d495b0cecaa039a98b30
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:03 2008 -0600
+
+ 86xx: Convert sbc8641d to use new law setup code.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 031976f6364b93833e989f57e9f1e023e0be8c4c
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:02 2008 -0600
+
+ 86xx: Convert mpc8610hpcd to new law setup method.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4933b91f8a49e436681f163df3173beb91cac44a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:01 2008 -0600
+
+ 86xx: Support new law setup method and convert mpc8641
+
+ Adds the support code in cpu/mpc86xx for the new law setup code
+ recently created fsl_law.c, and changes the MPC8641HPCN config
+ to use this code.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:00 2008 -0600
+
+ 86xx: Rearrange the sequence in start.S
+
+ * split the BAT initialization so that only 2 BATs (for the boot page
+ and stack) are programmed very early on. The rest are initialized later.
+ * Move other BAT setup, ccsrbar setup, and law setup later in the code
+ after translation has been enabled.
+
+ These changes will facilitate the moving of law and BAT initialization
+ to C code, and will aid with 36-bit physical addressing support.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 23 14:41:37 2008 +0100
+
+ Coding Style Cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 23 14:31:17 2008 +0100
+
+ Coding Style Cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Jan 18 10:07:04 2008 +0800
+
+ mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
+
+ The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
+ cause the 83xx immap broken, so the DMA and PCI will
+ be failed.
+
+ The patch fix the struct spi8xxx and rm struct spi83xx.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Apr 14 17:11:49 2007 +0200
+
+ AVR32: ATNGW100 board support
+
+ Add support for the ATNGW100 Network Gateway reference design,
+ including flash, ethernet and MMC support.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e006927a0b9a54e8ee7685d8ac748aaad6801862
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 24 18:15:31 2007 +0100
+
+ AVR32: Initialize ipaddr, loadaddr and bootfile at startup
+
+ I don't know why the relevant layers can't do this by itself, but this
+ is what ppc does.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 799891ef7b1b3432032ec23466df6b665a797fa4
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Jan 18 00:04:28 2008 +0100
+
+ Add AcTux board support
+
+ Hi,
+
+ The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
+ files that
+ contain changes for multiple boards, the board-specific files follow as
+ separate patches.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit 66a4344a4d910a11125df7768899ad529719855e
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:53:23 2008 +0100
+
+ add AcTux-4 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit bc24345e4101a5c996d6b48ce497b09c53025dc6
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:51:55 2008 +0100
+
+ add AcTux-3 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit aebf00fc4d1343b24715373893f7b20bf462d1e9
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:51:14 2008 +0100
+
+ add AcTux-2 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit ea99e8f05b7240fd657739e286664664ae160abe
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:50:37 2008 +0100
+
+ add AcTux-1 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 14 19:20:08 2008 +0100
+
+ ARM: remove useless function board_post_init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96bd462942022e4569b582c072a0ed26de1cd19b
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Thu Jan 10 14:59:46 2008 +0100
+
+ IXP: enable RTS
+
+ enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
+ No handshaking is done, but the active RTS signal allows to
+ connect to the target using a PC which is using RTS/CTS
+ handshake, and does no harm if the PC is set to ignore RTS.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 7 08:41:34 2008 +0100
+
+ IXP: add dynamic microcode addr
+
+ allow to load the microde from flash or ram by download it through
+ the serial or other.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Sat Nov 10 15:44:12 2007 +0100
+
+ load ixp42x NPE firmware from separate flash block, remove dead code
+
+ Hi,
+
+ the following patch adds support to move the IXP42X NPE firmware to a
+ separate flash block, whose start address is defined in
+ CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
+ NPE-enabled u-boot without copyright problems due to the NPE firmware.
+
+ I hope the patch applies, I get whitespace-related differences in the NPE
+ files due to trailing whitespace in the original versions.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 14:15:46 2008 -0600
+
+ ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 14:02:49 2008 -0600
+
+ ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 777d1abd9796f1c2e148417cc10657e847d318ce
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 14:00:25 2008 -0600
+
+ ColdFire: Add MCF547x_8x FEC driver
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 13:54:09 2008 -0600
+
+ ColdFire: Add MCF547x_8x dma code and header files
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 13:52:03 2008 -0600
+
+ ColdFire: Add MCF547x_8x dma code - 2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 13:48:52 2008 -0600
+
+ ColdFire: Add MCF547x_8x dma code - 1
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 13:39:44 2008 -0600
+
+ ColdFire: Add MCF547x_8x related header files
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 15 13:37:34 2008 -0600
+
+ ColdFire: Add MCF547x_8x cpu arch
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit e2756f4b54aba0e0523b81dd145666829cf7fd59
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:47:23 2008 -0600
+
+ ColdFire: Add MCF5227x cpu and M52277EVB support-3
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit c87581027994c148131b2f11aa75501f782ec19a
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:46:19 2008 -0600
+
+ ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:43:33 2008 -0600
+
+ ColdFire: Add MCF5227x cpu and M52277EVB support-1
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:35:44 2008 -0600
+
+ ColdFire: Fix CFI Flash low level Read/Write macro
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:23:08 2008 -0600
+
+ ColdFire: Add M5373EVB platform support - 2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:19:54 2008 -0600
+
+ ColdFire: Add M5373EVB platform support - 1
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:17:03 2008 -0600
+
+ ColdFire: Update FlexBus CS for MCF532x
+
+ Definition update and change from 16bit to 32bit
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:11:47 2008 -0600
+
+ ColdFire: PCI and misc updates for MCF5445x
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 17:06:55 2008 -0600
+
+ ColdFire: MCF5445x header files cleanup
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 16:59:42 2008 -0600
+
+ ColdFire: MCF532x header files cleanup
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Signed-off by: John Rigby <jrigby@freescale.com>
+
+commit 7af7751d047e74b2ec58400f97b879c56446b3e8
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jan 14 15:30:15 2008 -0600
+
+ ColdFire: Add modules header files
+
+ Add CF specific modules header files
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jan 17 12:48:00 2008 -0600
+
+ codingstyle cleanup for spi driver
+
+ ..and rm unused CONFIG_FSL_SPI define
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d59feffb42c9f174116db7a82a311df98983dfce
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Jan 16 17:12:12 2008 -0500
+
+ FSL: Fix common EEPROM_data structure definition
+
+ - Fix EEPROM_data structure definition according to System EEPROM Data Format.
+ - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
+ bd->bi_ethaddr.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6bee764bd6da510a4aad614880300c968bc7318d
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 16 15:48:12 2008 -0600
+
+ 86xx: enable command-line editing
+
+ Enable command-line editing for all MPC86xx boards.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jan 16 22:37:42 2008 -0500
+
+ Implement hard SPI driver on MPC8349EMDS
+
+ This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
+ This board has an ST M25P40 4Mbit EEPROM on its SPI bus
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jan 16 22:37:35 2008 -0500
+
+ Add support for a Freescale non-CPM SPI controller
+
+ This patch adds support for the SPI controller found on Freescale PowerPC
+ processors such as the MCP834x family. Additionally, a new config option,
+ CONFIG_HARD_SPI, is added for general purpose SPI controller use.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a8cb43a89be6cfd283257a603dd9841503ccce0f
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 17 18:23:19 2008 +0800
+
+ mpc83xx: Fix the fatal conflict of merge
+
+ The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
+ will cause the mpc8315erdb board can't boot up.
+
+ The patch fix that bug, and remove the duplicated #ifdef
+ CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
+ MPC8313E processor.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3259eeaa4148125a81417477f62c05bd67f60587
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Jan 17 08:50:09 2008 -0500
+
+ Merge Sequoia beautification into Korat code
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit e16925773211291b562e77187061e9dd1d757217
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Jan 17 07:45:05 2008 +0100
+
+ net: add 'ethrotate' environment variable
+
+ [PATCH] net: add 'ethrotate' environment variable
+
+ This patch replaces the buildtime configuration option
+ CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
+ configuration veriable. See README.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 17 14:29:04 2008 +0100
+
+ ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Jan 17 18:07:32 2008 +0900
+
+ sh: Remove CONFIG_COMMANDS from MS7720SE config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 055606bd25e88c0cd04ad348a679a04b1b616bee
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Jan 16 18:39:20 2008 +0100
+
+ ppc4xx: Netstal HCU4 board: added various fixes and POST
+
+ - Moved some common code to netstal/common/nm_bsp.c.
+ - sdram initialisation goes go netstal/common/fixed_sdram.c.
+ - Added support for POST.
+ - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 69b0634a4ee98c9791815600d43b99f626a952f3
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Thu Jan 17 12:53:56 2008 +0100
+
+ ppc4xx: netstal/common define routines used by all boards
+
+ Added some routines used by all Netstal boards:
+ - nm_bsp.c: - nm_show_print and
+ - common_misc_init_r
+ - set_params_for_sw_install. Very specific code to handle our SW
+ installation procedure
+ - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
+ to handle sdram initialization.
+ - nm.h: Common header
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Jan 16 18:39:18 2008 +0100
+
+ ppc4xx: Netstal HCU5 board: added various fixes and POST
+
+ - Moved some common code to nestal/common/nm_bsp.c.
+ - Added support for the vxWorks EDR.
+ - Enable trace for Lauterbach, if present.
+ - Added support for POST.
+ - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 4371090e5da77edc7bf9f296364db4801639d9c4
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Jan 16 18:39:08 2008 +0100
+
+ ppc4xx: Netstal HCU5 board. Added POST. Various fixes
+
+ - Various fixes
+ - Reduced rom_size from 384 to 320 kB
+ - Environment is now in flash
+ - Added POST
+ - Support for OF
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Jan 16 18:37:50 2008 +0100
+
+ ppc4xx: Netstal HCU4 board. Added POST. Various fixes
+
+ - Various fixes
+ - Reduced rom_size from 384 to 320 kB
+ - Environment is now in flash
+ - Added POST
+ - Support for OF
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Jan 17 10:53:08 2008 +0100
+
+ ppc4xx: Complete DU440 board support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Jan 17 10:52:30 2008 +0100
+
+ ppc4xx: Add DU440 board support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ac331da07db3860f11fa1d0fd3db7c810bce1198
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Jan 17 15:53:52 2008 +0900
+
+ sh: Update SuperH SCIF driver
+
+ This patch fixed wrong SH7720 CPU macro and changed macro that
+ calculated value of SCBRR register.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Jan 16 15:12:47 2008 +0100
+
+ Set ips dividor to 1/4 of csb clock.
+
+ Previous setting cause ips clock to be out of spec. This bug was found by John
+ Rigby from Freescale.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 02:19:18 2008 -0600
+
+ 85xx: Get ride of old TLB setup code
+
+ Now that all boards have been converted, remove old config code and the
+ config option for the new style.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 02:02:10 2008 -0600
+
+ 85xx: Convert TQM85xx to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 74121b470c14f7eaf284ee838bffca6f9521069e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:56:32 2008 -0600
+
+ 85xx: Convert STXGP3 & STXSSA to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:44:34 2008 -0600
+
+ 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 818218bac6a11591e2542c344d2330e0f4e1968b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:31:34 2008 -0600
+
+ 85xx: Convert PM854/PM856 to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:25:33 2008 -0600
+
+ 85xx: Convert MPC8540EVAL to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:12:22 2008 -0600
+
+ 85xx: Convert MPC8568 MDS to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 01:01:09 2008 -0600
+
+ 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 00:52:29 2008 -0600
+
+ 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 00:32:17 2008 -0600
+
+ 85xx: Convert ATUM8548 to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 23:11:57 2008 -0600
+
+ 85xx: Convert MPC8544 DS to new TLB setup
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 22:38:34 2008 -0600
+
+ 85xx: Reworked initial processor init
+
+ Reworked the initial processor initialzation sequence:
+ * introduced cpu_early_init_f that is run in address space 1 (AS=1)
+ * Moved TLB/LAW and CCSR init into cpu_early_init_f()
+ * Reworked initial asm code to do most of the core init before TLBs
+
+ The main reasons for these changes are to allow handling of 36-bit phys
+ addresses in the future and some of the issues that will exist when we
+ do that.
+
+ There are a few caveats on what can be initialized via the LAW and TLB
+ static tables:
+ * TLB entry 14/15 can't be initialized via the TLB table
+ * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
+ the code that is currently executing.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 44a23cfd6360a68eaa41f945190618a55519eac3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 22:33:22 2008 -0600
+
+ 85xx: Introduce new tlb API
+
+ Add a set of functions to manipulate TLB entries:
+ * set_tlb() - write a tlb entry
+ * invalidate_tlb() - invalidate a tlb array
+ * disable_tlb() - disable a variable size tlb entry
+ * init_tlbs() - setup initial tlbs based on static table
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be88b1699863c262818f3af7f60173b4d48df8fc
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 17 07:50:17 2008 +0100
+
+ ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 10:04:42 2008 -0600
+
+ 85xx: Use proper defines for PCI addresses
+
+ We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
+ While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
+ be used for configuring the PCI ATMU.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54a5070115eff38e9b324b78abdfa0b4520580b9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 09:22:29 2008 -0600
+
+ 85xx: Remove old style of LAW init
+
+ All boards are now using the new fsl_law code so we can drop the old version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 09:15:29 2008 -0600
+
+ 85xx: convert remaining 85xx boards over to use new LAW init code
+
+ Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
+ to use new LAW init code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 572b13afc42710f2957c382a710360429c0e099b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 09:11:53 2008 -0600
+
+ 85xx: convert STXGP3/STXSSA over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45f2166ac0233a9263058378f39612bd11f61196
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 09:06:48 2008 -0600
+
+ 85xx: convert PM854/PM856 over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 09:05:27 2008 -0600
+
+ 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 01:45:10 2008 -0600
+
+ 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 01:32:06 2008 -0600
+
+ 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 01:16:16 2008 -0600
+
+ 85xx: convert MPC8544 DS over to use new LAW init code
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 83d40dfd79fe868796275802f60116d84b9e4395
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 16 01:13:58 2008 -0600
+
+ 85xx: Move LAW init code into C
+
+ Move the initialization of the LAWs into C code and provide an API
+ to allow modification of LAWs after init.
+
+ Board code is responsible to provide a law_table and num_law_entries.
+
+ We should be able to use the same code on 86xx as well.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bed8ce838a609aaab136d43b25e6df2a520bc854
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 22 15:03:12 2007 +0100
+
+ qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0764c164fed6277d359cf132d55187ea34290114
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Jan 16 19:27:51 2008 +0200
+
+ MIPS:Target support for qemu -M mips
+
+ With serial, NE2000, IDE support. Tested in big-endian mode.
+ Memory size hard-coded to 128M for now, so don't play with
+ the -m option.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 11 00:01:37 2008 +0100
+
+ Fix nfs command help to reflect that the serverip is optional
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Dec 10 22:32:14 2007 +0100
+
+ bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
+
+ and move is_valid_ether_addr board file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c2f896b8fc4722e36915903e1942e138e68ce804
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Jan 16 16:13:31 2008 +0900
+
+ drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
+
+ rx_status on the memory is basically in LE, but needs to be handled in CPU
+ endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
+ it'll work fine.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Masami Komiya <mkomiya@sonare.it>
+ Cc: Lucas Jin <lucasjin@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 96a236746fe6a7b84802afb4ed31536696d34812
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Jan 16 16:12:26 2008 +0900
+
+ drivers/net/rtl8139.c: Fix cache coherency issues
+
+ Current driver is meant for cache coherent systems. This patch adds
+ flush_cache() routines to support cache non-coherent systems.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Masami Komiya <mkomiya@sonare.it>
+ Cc: Lucas Jin <lucasjin@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d1276c76c1e2b5035296689280ba1acb2c425104
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Jan 16 16:11:14 2008 +0900
+
+ drivers/net/rtl8139.c: Fix tx timeout
+
+ "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
+ does, the condition "(currticks() < to)" becomes invalid and immediately
+ leads to tx timeout error. This patch introduces the fine-graded udely(10)
+ loops to ease the impact of wrapping around.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Masami Komiya <mkomiya@sonare.it>
+ Cc: Lucas Jin <lucasjin@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Jan 11 18:45:28 2008 +0800
+
+ TSEC: Add the support for RealTek RTL8211B PHY
+
+ Add the support of RealTek RTL8211B PHY, the RTL8211B
+ PHY only supports RGMII and MII mode.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 84a3047b72b70e862b0b7a8e2058077457f89a32
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Wed Jan 16 09:40:41 2008 +0100
+
+ Remove annoying debug printout for PHY less boards.
+
+ PHY less board prints out lots of "read wrong ...":
+ read wrong value : mii_id 3,mii_reg 2, base e0102320
+ read wrong value : mii_id 3,mii_reg 3, base e0102320
+ UEC: PHY is Generic MII (ffffffff)
+ read wrong value : mii_id 3,mii_reg 4, base e0102320
+ read wrong value : mii_id 3,mii_reg 0, base e0102320
+ read wrong value : mii_id 3,mii_reg 1, base e0102320
+ read wrong value : mii_id 3,mii_reg 1, base e0102320
+ read wrong value : mii_id 3,mii_reg 5, base e0102320
+ read wrong value : mii_id 3,mii_reg 1, base e0102320
+ read wrong value : mii_id 3,mii_reg 1, base e0102320
+ read wrong value : mii_id 3,mii_reg 5, base e0102320
+ FSL UEC0: Full Duplex
+ FSL UEC0: Speed 100BT
+ FSL UEC0: Link is up
+ Using FSL UEC0 device
+
+ Make this printout depend on UEC_VERBOSE_DEBUG and
+ remove its definition in uec_phy.c
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 15 14:11:00 2008 -0600
+
+ net: reduce boot latency on QE UEC based boards
+
+ actually polling for PHY autonegotiation to finish enables us to remove the
+ 5 second boot prompt latency present on QE based boards.
+
+ call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
+ uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
+ code shamelessly stolen from tsec driver.
+
+ also rm unused CONFIG_RMII_MODE code.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
+Author: michael.firth@bt.com <michael.firth@bt.com>
+Date: Wed Jan 16 11:40:51 2008 +0000
+
+ TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
+
+ The current TSEC driver limits MDIO access to the devices that have been configured as attached
+ to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
+
+ Signed-off-by: Michael Firth <michael.firth@bt.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jan 16 00:38:05 2008 -0600
+
+ Add support for the MPC837xERDB
+
+ MPC837xERDB board support includes:
+ * DDR2 330MHz hardcoded (soldered on the board)
+ * Local Bus NOR Flash
+ * I2C, UART and RTC
+ * eTSEC RGMII (TSEC0 - RTL8211B with MII;
+ * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
+ * load)
+
+ Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
+ Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jan 16 12:06:16 2008 -0600
+
+ mpc83xx: add support for more system clock performance controls
+
+ System registers that are modified are the Arbiter Configuration
+ Register (ACR), the System Priority Control Register (SPCR), and the
+ System Clock Configuration Register (SCCR).
+
+ Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
+ Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 16c3cde050e2d243e62b37486f1558570787beb8
+Author: James Yang <james.yang@freescale.com>
+Date: Wed Jan 16 11:58:08 2008 -0600
+
+ FSL: Generalize PIXIS reset command parsing.
+
+ Before, the order of arguments to the pixis_reset
+ command needed to be supplied in a hard-coded order.
+ Generalize the command parsing to allow any order.
+
+ Signed-off-by: James Yang <james.yang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit ad8f8687b78c3e917b173f038926695383c55555
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jan 15 13:42:41 2008 -0600
+
+ FSL: Convert board/freescale/common/Makefile to use CONFIG_
+
+ Convert the board/freescale/common/Makefile to use
+ CONFIG_* options to select which files to conditionally
+ compile into the board/freescale/common library rather
+ than conditionally compiling entire files.
+
+ Now handles::
+ CONFIG_FSL_PIXIS
+ CONFIG_FSL_DIU_FB
+ CONFIG_PQ_MDS_PIB
+
+ CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7c2221eb230372a9e537c4f6636b147b0909325f
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Tue Jan 15 16:38:38 2008 +0800
+
+ Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
+
+ Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
+ Remove unused ethernet CONFIG_ options.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 711a7946277d2e29af481011e8635e9975c54e45
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 15 14:05:14 2008 -0600
+
+ mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
+
+ continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 363eea9ff7f19a2cba17f262bd17559f166e134e
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 15 09:51:12 2008 -0600
+
+ mpc83xx: clean up mpc8360emds.c warnings
+
+ mpc8360emds.c: In function 'ft_board_setup':
+ mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
+ mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
+ mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
+ mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
+ mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
+ mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jan 14 16:14:46 2008 -0600
+
+ mpc83xx: fix phy-connection-type fixup code
+
+ use tree passed to us in local blob, not global fdt.
+
+ Also use fdt_path_offset to convert to relative offset, since absolute
+ reference is needed to check for rgmii-id mode string value.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2b4c952be7c4357a13e839d48df80853820c33eb
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jan 14 09:01:40 2008 -0600
+
+ mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e1d8ed2c08da14b168658cc5fa78529d461aea70
+Author: Poonam Aggrwal <b10812@freescale.com>
+Date: Mon Jan 14 09:41:14 2008 +0530
+
+ Changes in uboot DDR configuration for MPC8313eRDB
+
+ These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
+ DDR configuration in u-boot code. Some are related to performance, some
+ affect stability and some correct few basic errors in the current
+ configuration.
+
+ The changes have been tested and found to give better memory latency
+ figures on MPC8313eRDB.LMBench figures prove it.
+
+ The changes are:
+
+ - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
+ (this may improve performance for application with many read
+ or write to open pages).
+ - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
+ 001 (activating all the CS when only one is used may cause
+ unwanted noise on the system)
+
+ - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
+ Tras=45ns)
+ - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
+
+ - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
+ comply with the 3 ODT clk requirements)
+ - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
+ - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
+
+ - DDR_SDRAM_MODE[AL]changed from 0 to 1.
+ - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
+
+ - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
+ - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
+
+ The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
+ The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
+
+ Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
+ Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
+ Cc: Razzaz Mazyar <MRazzaz@freescale.com>
+ Cc: Josep P J <PJ.Joseph@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Sat Jan 12 13:24:14 2008 -0500
+
+ Enable the isdram command on the MPC8360EMDS board
+
+ The isdram command prints out decoded information the "serial presence
+ detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
+ debugging memory configuration problems.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8bd522ce4afda3d4868ee8c913f5394094326be1
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Jan 11 18:48:24 2008 +0800
+
+ mpc83xx: Add the support for MPC8315ERDB board
+
+ The features list:
+ - Boot from NOR Flash
+ - DDR2 266MHz hardcoded configuration
+ - Local bus NOR Flash R/W operation
+ - I2C, UART, MII and RTC
+ - eTSEC0/1 support
+ - PCI host
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b05884efa614e4d8a9413158fc228e0dc02ab704
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Jan 11 18:46:50 2008 +0800
+
+ mpc83xx: Add config of eTSEC emergency priority in SPCR
+
+ The TSEC emergency priority definition of 831x/837x
+ is different than the definition of 834x in SPCR register.
+
+ Add the other config of TSEC emergency priority into
+ cpu_init.c
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Jan 11 18:42:19 2008 +0800
+
+ mpc83xx: Remove cache config from MPC8360ERDK.h
+
+ The MPC8360ERDK board support patch is added before
+ the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
+ so, miss clean up it.
+
+ The patch clean up the miss cache config.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cd9d23053d435c08fc8695017b5cb9003fcda786
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Jan 14 23:09:32 2008 +0300
+
+ nand: FSL UPM NAND driver
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 6cb2239ae76faee64434286c4f8fc71374702dd2
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jan 15 08:59:44 2008 +0900
+
+ OneNAND: Separate U-Boot dependent code from OneNAND
+
+ OneNAND: Separate U-Boot dependent code from OneNAND
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 16 10:33:46 2008 +0100
+
+ ppc4xx: Sequoia coding style cleanup and beautification
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
+Author: Larry Johnson <lrj@acm.org>
+Date: Tue Jan 15 14:35:58 2008 -0500
+
+ ppc4xx: Refactor ECC POST for AMCC Denali core
+
+ The ECC POST reported intermittent failures running after power-up on
+ the Korat PPC440EPx board. Even when the test passed, the debugging
+ output occasionally reported additional unexpected ECC errors.
+
+ This refactoring has three main objectives: (1) minimize the code
+ executed with ECC enabled during the tests, (2) add more checking of the
+ results so any unexpected ECC errors would cause the test to fail, and
+ (3) use synchronization (only) where required by the processor.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 2465665b73ac2f688af945b1ed510752afa816a4
+Author: David Saada <David.Saada@ecitele.com>
+Date: Tue Jan 15 10:40:24 2008 +0200
+
+ QE UEC: Extend number of supported UECs to 4
+
+ This patch extends the number of supported UECs to 4. Note that the
+ problem of QE thread resources exhaustion is resolved by setting the
+ correct number of QE threads according to Ethernet type (GBE or FE).
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 16 00:01:01 2008 +0100
+
+ LWMON5: enable hush shell as command line parser
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 15 17:22:28 2008 +0100
+
+ ADS5121: disable watchdog; enable image timestamps
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 15 17:21:28 2008 +0100
+
+ TK885D: fixes for bigger flash sector sizes on new modules;
+ adjust default environment;
+ disable SCC ethernet (not used on this board).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jan 15 17:48:13 2008 +0900
+
+ pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jan 15 23:25:25 2008 +0900
+
+ sh: Add support SH7710/SH7712
+
+ SH7710/SH7712 of SH3 CPU are supported.
+ SH771X is called SH-Ether, and has the Ether controller in CPU.
+ The driver of Ether is not included in this patch.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 63a11be68306870e04d3851ed9fa41955cdf4894
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jan 15 23:06:17 2008 +0900
+
+ sh: Add support of map_physmem() and unmap_physmem() to SuperH
+
+ This patch add the support of map_physmem() and unmap_physmem()
+ used with Common Flash Interface(CFI) driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Jan 9 14:42:27 2008 +0900
+
+ sh: Add maintainer of MS7720SE to the MAINTAINER file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Jan 9 14:39:58 2008 +0900
+
+ sh: Fix board name in MS7720SE's config.mk
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c0a04d93734d768b39dbb72fb501b65614c8615d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Jan 9 14:37:36 2008 +0900
+
+ sh: Add MS7720SE to MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Mon Dec 3 22:58:50 2007 +0900
+
+ sh: Add support for MS7720RP02 board
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jan 9 14:30:02 2008 +0900
+
+ sh: Add support for SH7720 in serial_sh driver.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Mon Dec 3 22:58:45 2007 +0900
+
+ sh: Add support SH3 and SH7720
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 15 10:11:02 2008 +0100
+
+ ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17bef68097ab3692500a36fb31115bff7910aa99
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Mon Jan 14 14:04:42 2008 +0100
+
+ ppc_4xx: Fix post spr.c for PPC405
+
+ post/cpu/ppc4xx/spr.c contained a few checks for registers only present
+ for PPC440 and derivates processor.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 06c428bcd4413014b43236e77765022071424fa6
+Author: Dave Liu <r63238@freescale.com>
+Date: Mon Jan 14 11:12:01 2008 +0800
+
+ QE: fix compile warning
+
+ qe.c: In function 'qe_upload_firmware':
+ qe.c:390: warning: pointer targets in passing argument 2
+ uec.c: In function 'uec_initialize':
+ uec.c:1236: warning: 'uec_info' may be used uninitialized
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit a0dd99d51efa55fe023e19c97ead92683725eb11
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 14 10:05:05 2008 +0100
+
+ ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
+
+ Now that bit 29 is the USB PHY reset bit, update the Kilauea port
+ to remove the USB PHY reset after powerup. The CPLD will keep the
+ USB PHY in reset (active low) until the bit is set to 1 in
+ board_early_init_f().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 23:26:45 2008 +0100
+
+ ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 23:37:50 2008 +0100
+
+ ADS5121: Fix typo in ads5121.c, adjust default environment
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Aug 24 18:18:43 2007 -0600
+
+ ADS5121: MAX slew rate for PATA pins
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit dd531aac34aaad138f16cacdb51d61908d59c0e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 21:05:52 2008 +0100
+
+ Fix Makefile dependency problem with parallel builds.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 19:51:39 2008 +0100
+
+ MPC8544DS: fix board Makefile for silent build (with -s)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 16:44:08 2008 +0100
+
+ PMC440 board: fix board Makefile for out-of-tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 16:07:44 2008 +0100
+
+ Makalu: fix compile warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 13 12:36:12 2008 +0100
+
+ cmd_nand : fix compiler warning.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
+Author: Michael Schwingen <rincewind@discworld.dascon.de>
+Date: Sat Jan 12 20:29:47 2008 +0100
+
+ CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 02:19:44 2008 +0100
+
+ MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 02:19:13 2008 +0100
+
+ MPC8xx FEC driver: fix compiler warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 00:59:21 2008 +0100
+
+ Fix Makefile dependencies issues; allow silent build
+
+ - get rid of "version" target whichdidn't really work
+ - make autoconf.mk depend on version_autogenerated.h to make sure
+ to rebuild files as needed
+ - add XECHO macro to allow for silent build using "make -s"
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 00:55:47 2008 +0100
+
+ ADS5121e: fix compile warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2b6f4610627fe3d607620e25082916a01538875
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 13 00:55:18 2008 +0100
+
+ MUNICes: fix board Makefile for remote build directory
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
+Author: Oliver Weber <almoeli@gmx.de>
+Date: Wed Jan 9 17:04:38 2008 +0100
+
+ MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
+
+ Signed-off-by: Oliver Weber <almoeli@gmx.de>
+
+commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Wed Jan 9 17:10:56 2008 +0100
+
+ Make bootretry work when command line editing is enabled
+
+ Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
+ This patch fixes the problem.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
+Author: Larry Johnson <lrj@acm.org>
+Date: Fri Jan 11 23:26:18 2008 -0500
+
+ Refactor code for "i2c sdram" command
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 0df6b8446c4721b91ce311548114891130371083
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Jan 10 22:23:39 2008 -0500
+
+ Fix "i2c sdram" command for DDR2 DIMMs
+
+ Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
+ "i2c sdram" command. This patch provides correct alternative
+ interpretations when DDR2 memory is detected.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 64134f011254123618798ff77c42ba196b2ec485
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 12 20:31:39 2008 +0100
+
+ Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
+
+ With recent toolchain versions, some boards would not build because
+ or errors like this one (here for ocotea board when building with
+ ELDK 4.2 beta):
+ ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
+
+ For many boards, the .bss section is big enough that it wraps around
+ at the end of the address space (0xFFFFFFFF), so the problem will not
+ be visible unless you use a 64 bit tool chain for development. On
+ some boards however, changes to the code size (due to different
+ optimizations) we bail out with section overlaps like above.
+
+ The fix is to add the NOLOAD attribute to the .bss and .sbss
+ sections, telling the linker that .bss does not consume any space in
+ the image.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3afac79ec27b91df185f090b31dad9620779f440
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Jan 11 20:42:58 2008 -0600
+
+ USB: Add Philips 1561 PCI-OHCI ids
+ (needed for M5475EVB)
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 5e8def6731cd7bec74bff42a16b139de04010353
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 12 15:51:34 2008 +0100
+
+ Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
+ boards.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jan 11 12:03:43 2008 +0100
+
+ MPC512X: Cleanup bus clock names.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Jan 8 17:16:59 2008 +0100
+
+ MPC512X: Fixed typo in macro name.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Jan 8 17:16:15 2008 +0100
+
+ ads5121: Added support for FDT.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 12 01:05:50 2008 +0100
+
+ Coding Style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 15:15:17 2008 +0100
+
+ Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 15:15:16 2008 +0100
+
+ MUNICes: Set the right CFG_DEFAULT_MBAR value.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 15:15:15 2008 +0100
+
+ added the config File for the MUNICes board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 15:15:14 2008 +0100
+
+ added basic support for the MUNICes board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 12 00:39:37 2008 +0100
+
+ Update CHANGELOG and MAINTAINERS files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ba7390c3cb579172be66888a371707b47b5be4e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Jan 11 02:15:02 2008 +0100
+
+ Fix compilation problem in common/cmd_bmp.c
+
+ common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
+ isn't defined. This patch fix this.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 01:12:09 2008 +0100
+
+ Fix defaultconfig for the mgcoge board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit ac9db066b26935f31bff15c98168b19faeb603f3
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 01:12:08 2008 +0100
+
+ Added support for the mgcoge board from keymile.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 01:12:07 2008 +0100
+
+ Enable SMC microcode relocation patch for SMC1.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 11 01:12:06 2008 +0100
+
+ Added support for the mgsuvd board from keymile.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit bf05293973b348f6946c9df92cd3c65ece42d0be
+Author: James Yang <james.yang@freescale.com>
+Date: Thu Jan 10 16:02:07 2008 -0600
+
+ Fix 64-bit vsprintf.
+
+ There were some size and unsigned problems.
+ Also add support for "ll" size modifier in format string like glibc
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 92fa37eac530860643afa26ae347af3d23d67309
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 9 12:42:35 2008 -0500
+
+ Remove superfluous preprocessor conditionals from LM73 driver
+
+ (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
+
+ (2) Use conditional Makefile.o.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit efc6f447c1b940d1650c4b854c5598a595ddc3da
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jan 10 17:59:07 2008 +0100
+
+ Add support for the TK885D baseboard from TELE-DATA
+
+ The TK885D board uses a TQM885D module from TQ, this port adds an
+ own configuration file and adds a last_stage_init() method to
+ configure the two PHYs, depending on the phy_auto_nego environment
+ variable.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 10 02:22:05 2008 -0600
+
+ Fix compiler warning
+
+ main.c: In function 'readline_into_buffer':
+ main.c:927: warning: unused variable 'p_buf'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Jan 11 14:30:01 2008 +0100
+
+ Add Fujitsu CoralP/Lime video driver
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Jan 11 02:39:47 2008 +0100
+
+ Fix video console newline and carriage return handling
+
+ Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
+ are not displayed correctly. This is an attempt to fix
+ this issue. Also add carriage return handling.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 11 15:53:58 2008 +0100
+
+ ppc4xx: Fix sdram init on Sequoia boards
+
+ Clear possible errors in MCSR resulting from data-eye-search.
+ If not done, then we could get an interrupt later on when
+ exceptions are enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d610a60730b7464f6f659db49d264d89a7c71061
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Jan 11 15:31:09 2008 +0100
+
+ ppc4xx: Rework Lime support for lwmon5
+
+ Rework Lime support for lwmon5 using new video driver
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 11 14:55:16 2008 +0100
+
+ ppc4xx: Update PMC440 config file
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 11 14:55:08 2008 +0100
+
+ ppx4xx: Fix sdram init on PMC440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 061aad4d320dddce26247699dcf2875ee2ea1366
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:09:33 2008 +0800
+
+ mpc83xx: Fix the bug of 266MHz data rate DDR
+
+ The DDR doesn't work on the 266MHz data rate,
+ the patch fix the bug.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ded08317ad9e340b887bf2eb46e9565a0f610a93
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:08:26 2008 +0800
+
+ mpc83xx: Make the code more readable
+
+ Format the code, make it more readable
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:07:23 2008 +0800
+
+ mpc83xx: Reduce the latency of DDR
+
+ Reduce the AL from 2 to 1 clock to improve the performance.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:06:05 2008 +0800
+
+ mpc83xx: Fix the wrong definition of MPC8315E
+
+ According to the latest user manual of MPC8315E,
+ 1) The SVCOD of HRCWL is different than 837x
+ 2) The SCCR has changes
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ec2638ea08a537a1bd409db873aaaa33a053ebae
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:05:00 2008 +0800
+
+ mpc83xx: Fix the typo in mpc83xx.h
+
+ The SPCR about TSEC priority is wrong.
+
+ Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
+ Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:04:13 2008 +0800
+
+ mpc83xx: Fix the typo in global data struct
+
+ Fix the typo in global_data.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2c5b48fc205c3e2752910da8f39209ed075929e5
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Jan 10 23:03:03 2008 +0800
+
+ mpc83xx: Remove cache config from config.h
+
+ clean up the cache config from configs.h of board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fab6f556bbbbd1bb35a5433161f7f173c18df559
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jan 9 20:57:47 2008 +0300
+
+ mpc83xx: add support for the MPC8360E-RDK
+
+ This is MPC8360E based board with:
+ - 256MB fixed SDRAM;
+ - 8MB Intel Strata NOR flash;
+ - StMICRO 64MiB NAND flash;
+ - two 10/100/1000 ethernet ports connected via Broadcom
+ BCM5481 PHYs;
+ - two 10/100 ethernet ports connected via National
+ DP83848 PHYs;
+ - one PCI and one miniPCI slots;
+ - four serial ports (two NS16550-compatible, two UCCs);
+ - four USB ports working through MPC8360E "FHCI" USB controller;
+ - Fujitsu MB86277 graphics controller;
+ - Analog to Digital Converter/Touchscreen controller, AD7843
+ connected to SPI.
+
+ Features not supported in this patch are:
+ - StMICRO 64MiB NAND flash (patch sent);
+ - MINT framebuffer initialization (patch is pending);
+ - Fetching production information from the EEPROM via I2C;
+ - FHCI USB;
+ - Two slow UCCs used as RS-485 UARTs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jan 9 20:57:40 2008 +0300
+
+ mpc83xx: add "fsl, qe" compatible fixups
+
+ New device trees will use "fsl,qe" compatible properties.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 977b57583a7c34010e566a09a679ec3c1836f996
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jan 9 15:24:06 2008 -0600
+
+ mpc83xx: add missing CONFIG_HAS_ETH0 defines
+
+ the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
+ is defined; add the define to the missing board configs.
+
+ Thanks to Emilian Medve for finding this.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b830b7f1635984ba607219fcbd78597c28eeb529
+Author: Becky Bruce <bgill@freescale.com>
+Date: Thu Jan 10 14:00:28 2008 -0600
+
+ 86xx: Support 2GB DIMMs
+
+ Configure the number of bits used to address the banks inside the SDRAM
+ device. The default register value of 0 means 2 bits to address 4 banks.
+ Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
+
+ Signed-off-by: Becky Bruce <bgill@freescale.com>
+
+commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Thu Jan 10 18:50:33 2008 +0100
+
+ ppc4xx: Make Sequoia boot vxWorks
+
+ vxWorks expects in
+ TLB 0 a entry for the Machine Check interrupt
+ TLB 1 a entry for the RAM
+ TLB 2 a entry for the EBC
+ TLB 3 a entry for the boot flash
+
+ After changing the baudrate to 9600 I had no problems to boot the
+ vxWorks image as distributed by WindRiver (Revision 2.0/1 from
+ June 18, 2007)
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Wed Jan 9 23:10:27 2008 -0500
+
+ ppc4xx: Fix dflush() to restore DVLIM register
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 252f60b068d1f94190b5bcfda169db582387e15e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jan 10 03:52:44 2008 -0500
+
+ Nios2: remove common/cmd_bdinfo.c unused variable.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jan 9 18:15:53 2008 -0500
+
+ Fix Ethernet init() return codes
+
+ Change return values of init() functions in all Ethernet drivers to conform
+ to the following:
+
+ >=0: Success
+ <0: Failure
+
+ All drivers going forward should return 0 on success. Current drivers that
+ return 1 on success were left as-is to minimize changes.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Acked-By: Timur Tabi <timur@freescale.com>
+
+commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jan 10 00:55:14 2008 +0100
+
+ Coding Style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jan 9 16:56:54 2008 -0600
+
+ Add QE brg freq and correct qe bus freq fdt update code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 890dfef06c2d169a3356359596890754dfb8ee1c
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Jan 9 16:34:51 2008 -0600
+
+ Remove cache config from ATUM8548 and sbc8548 configs
+
+ These boards weren't updated by Kumar's config patch because they
+ weren't in the tree, yet.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Jan 7 13:31:19 2008 -0600
+
+ 85xx: add ability to upload QE firmware
+
+ Define the layout of a binary blob that contains a QE firmware and instructions
+ on how to upload it. Add function qe_upload_firmware() to parse the blob and
+ perform the actual upload. Add command-line command "qe fw" to take a firmware
+ blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
+ 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
+ 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jan 8 01:22:21 2008 -0600
+
+ 85xx: Remove cache config from configs.h
+
+ Either use the standard defines in asm/cache.h or grab the information
+ at runtime from the L1CFG SPR.
+
+ Also, minor cleanup in cache.h to make the code a bit more readable.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
+Author: robert lazarski <robertlazarski@gmail.com>
+Date: Fri Dec 21 10:39:27 2007 -0500
+
+ mpc85xx: Add support for ATUM8548 (updated)
+
+ Add support for Instituto Atlantico's ATUM8548 board
+
+ Signed-off-by: robert lazarski <robertlazarski@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
+Author: robert lazarski <robertlazarski@gmail.com>
+Date: Fri Dec 21 10:36:37 2007 -0500
+
+ mpc85xx: Add support for ATUM8548 (updated)
+
+ Add support for Instituto Atlantico's ATUM8548 board
+
+ Signed-off-by: robert lazarski <robertlazarski@gmail.com>
+
+commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Dec 13 06:45:14 2007 -0600
+
+ mpc85xx: Add support for SBC8548 (updated)
+
+ Add support for Wind River's SBC8548 reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Dec 13 06:45:08 2007 -0600
+
+ mpc85xx: Add support for SBC8548 (updated)
+
+ Add support for Wind River's SBC8548 reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Signed-off by: Andy Fleming <afleming@freescale.com>
+
+commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Oct 22 19:58:19 2007 +0400
+
+ MPC8568E-MDS: set up QE pario for UART1
+
+ To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
+ be set up appropriately.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit ad162249cb371e9e38971676f09be791e5f3cf4a
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Oct 22 18:12:46 2007 +0400
+
+ MPC8568E-MDS: reset UCCs to use them reliably
+
+ In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
+ UCCs.
+
+ p.s Similar code exists in the Linux kernel board file (for capability
+ reasons with older U-Boots), but should be removed some day.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 2146cf56821c3364786ca94a7306008c5824b238
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Dec 19 01:18:15 2007 -0600
+
+ Reworked FSL Book-E TLB macros to be more readable
+
+ The old macros made it difficult to know what WIMGE and perm bits
+ were set for a TLB entry. Actually use the bit masks for these items
+ since they are only a single bit.
+
+ Also moved the macros into mmu.h out of e500.h since they aren't specific
+ to e500.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1d47273d46925929f8f2c1913cd96d7257aade88
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 18 23:21:51 2007 -0600
+
+ Use FSL Book-E MMU macros from Linux Kernel
+
+ Grab the FSL Book-E MAS register macros from Linux. Also added
+ defines for page sizes up to 4TB and removed SHAREN since it doesnt
+ really exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Jan 9 13:51:32 2008 -0600
+
+ Fix my own merge stupidity
+
+ Way back in August I merged Heiko's patch:
+ 566a494f592: [PCS440EP] upgrade the PCS440EP board
+
+ with Jon's CONFIG_COMMANDS patches.
+
+ This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
+
+ However, in the process, I left out some of Heiko's good changes.
+
+ Now Heiko's and Jon's patches are properly merged in fat_register_device()
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
+Author: James Yang <James.Yang@freescale.com>
+Date: Wed Jan 9 11:17:49 2008 -0600
+
+ Expose parse_line() globally.
+
+ Add new function readline_into_buffer() that allows the
+ output of readline to be put into a pointer to char buffer.
+
+ This refactoring allows other functions besides the
+ main command loop to also use the same input mechanism.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Jan 9 01:15:25 2008 +0100
+
+ trivial: fix consequences of a bad merge
+
+ Fix what looks like a merge artifact.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Jan 3 10:51:15 2008 +0800
+
+ Add Ctrl combo key support to usb keyboard driver.
+
+ Ctrl combo key support is added, which is very useful to input Ctrl-C
+ for interrupt current job.
+ Also add usb_event_poll() calling to usb_kbd_testc(), which can get
+ key input when tstc() is called.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Dec 30 03:30:56 2007 +0100
+
+ fix various comments
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 7817cb2083d982923752fe0f12b67c0e7c09a027
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Dec 30 03:30:46 2007 +0100
+
+ fix comments with new drivers organization
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit a9b410dc7d2a4721c408b13abfc037988150f145
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Dec 28 12:50:59 2007 +0900
+
+ Remove the obsolete terse version of do_mii()
+
+ We now have more useful version of do_mii() and everybody use it.
+ Gerald Van Baren says:
+
+ > When I originally wrote the mii command 6(!) years ago, I wrote a
+ > verbose version that printed human readable decomposition of the flags,
+ > etc., and a terse one that didn't print as much stuff and thus had a
+ > smaller memory footprint.
+ >
+ > It sounds like the terse version has withered and died, apparently
+ > people are only using the verbose version (which is very understandable,
+ > I do myself).
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 01c687aa6e065bd4faf80f723361e798941dd6b0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 27 13:42:56 2007 -0500
+
+ Do not reference sha1.c when building mkimage.
+
+ remove sha1.o from mkimage linking since it isn't actually used.
+
+ Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
+
+commit b9173af73e524d37c812f210173cf83385c5171a
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Thu Dec 27 15:39:54 2007 +0900
+
+ common/cmd_mii.c: Add sanity argc check
+
+ If type mii command without arguments, we suffer from uninitialized argv[]
+ entries; for example we MIPS get stuck by TLB error.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 500856eb1707ed17d9204baa61dd59948d3b2899
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Wed Jan 9 19:39:36 2008 +0100
+
+ API for external applications.
+
+ This is an API for external (standalone) applications running on top of
+ U-Boot, and is meant to be more extensible and robust than the existing
+ jumptable mechanism. It is similar to UNIX syscall approach. See api/README
+ for more details.
+
+ Included is the demo application using this new framework (api_examples).
+
+ Please note this is still an experimental feature, and is turned off by
+ default.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Jan 9 12:14:55 2008 -0600
+
+ 86xx: Remove cache config from configs.h
+
+ Just use the standard defines in asm/cache.h.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 26a41790f8eba19ad450e18ae91351daf485b3e2
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Wed Jan 9 18:05:27 2008 +0100
+
+ Globalize envmatch()
+
+ The newly introduced API (routines related to env vars) will need to call
+ it.
+
+ Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
+
+commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Jan 4 12:07:27 2008 -0600
+
+ Convert MPC8610HPCD to use libfdt.
+
+ Assumes the presence of the aliases node in the DTS to
+ locate the pci and serial nodes for fixups.
+
+ Use consistent fdtaddr and fdtfile in environment variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Jan 4 11:58:23 2008 -0600
+
+ 8610: Fix lingering compile warnings.
+
+ Turn off DEBUG.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 15:14:46 2008 +0100
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 18 04:29:55 2007 -0500
+
+ fix easylogo on big endian dev systems
+
+ didnt realize how out of shape easylogo actually was until i tried using it.
+ this patch does byte swapping as need be on the input tga header since the tga
+ is in little endian but the host could just as well be big endian. i didnt
+ bother using bswap macros or such stuff from system headers as nothing in
+ POSIX dictates byte swapping functionality.
+
+ Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
+
+commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 18 03:23:25 2007 -0500
+
+ cleanup easylogo
+
+ - make the Makefile not suck
+ - include proper headers for prototypes
+ - fix obvious broken handling of strchr() when handling '.' in filenames
+
+ Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
+
+commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
+Author: raptorbrino@aim.com <raptorbrino@aim.com>
+Date: Thu Dec 13 21:23:28 2007 -0500
+
+ Fix build problems under Cygwin
+
+ This patch allows u-boot to build without error in a cygwin
+ environment. Cygwin does not define __u64 in it's
+ include/asm/types.h file. The -idirafter flag in the u-boot
+ build causes the inclusion of the cygwin types.h file as opposed
+ to u-bot/include/asm/types.h file which does define __u64.
+ Subsequently, sha1.c compile fails due to unknown symbol.
+
+ Signed-off-by: Brian Miller <raptorbrino@netscape.net>
+
+commit 43ef1c381f9195504a2488f5cb909227eb97d475
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Fri Nov 30 17:29:59 2007 +0100
+
+ cmd_bmp: Add support for displaying gzip compressed bmps
+
+ The existing code can show information about a gzip compressed BMP
+ image, but can't actually display it.
+
+ Therefore, move the decompression code out of bmp_info() and use it in
+ bmp_display() as well in order to display a compressed BMP image.
+
+ Also, clean things up a bit and fix a memory leak while we're at it.
+
+ [hskinnemoen@atmel.com: a bit of refactoring]
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit d197ffd8172c6fdef38733424640a9a47295d6e9
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Nov 29 21:15:56 2007 +0100
+
+ Fix and optimize MII operations on FEC (MPC8xx) controllers
+
+ This patch fixes several issues at least on a MPC885 based system with two
+ FEC interfaces used in MII mode.
+
+ 1. PHY discovery should first read PHY_PHYIDR2 register and only then
+ PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
+ otherwise the values read are wrong. Also notice, that PHY discovery
+ cannot work on MPC88x / MPC87x in setups with both FECs active at all
+ in its present form, because for both interfaces the registers from FEC
+ 1 are used to communicate over MII.
+
+ 2. Remove code duplication for resetting the FEC by isolating it into a
+ separate function.
+
+ 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
+
+ 4. Optimize mii_init() to only reset the FEC 1 controller once.
+
+ 5. Fix a typo in mii_init() using index i instead of j thus potentially
+ leading to unpredictable results.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Nov 20 13:14:20 2007 +0100
+
+ Fix endianness conversions in rtl8169 driver
+
+ It is unclear on what platforms this driver has been tested, since
+ noone up to now defines CONFIG_RTL8169 in the board configuration
+ header. Now it has been fixed for a big-endian mpc8241 based
+ linkstation platform. This patch presents the necessary endianness
+ conversion fixes.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Jan 3 10:51:15 2008 +0800
+
+ Add Ctrl combo key support to usb keyboard driver.
+
+ Ctrl combo key support is added, which is very useful to input Ctrl-C
+ for interrupt current job.
+ Also add usb_event_poll() calling to usb_kbd_testc(), which can get
+ key input when tstc() is called.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 13:43:38 2008 +0100
+
+ Coding Style clenaup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:13:11 2007 +0100
+
+ Remove bit swapping in Xilinx Spartan bitfile loading
+
+ This patch removes the unnecessary bit swapping when
+ booting .bit files with the 'fpga loadb' command.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 437fc7327f0611f82937858f2d80e4cd61b40984
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:13:05 2007 +0100
+
+ Fix MSB check in Xilinx Spartan slave serial mode
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 3bff4ffa33729a42645e328a21e8d16488872958
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:56 2007 +0100
+
+ Add new Xilinx Spartan FPGA types
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:43 2007 +0100
+
+ Add pre and post configuration callbacks for Spartan FPGAs
+
+ This patch adds a post configuration callback for Spartan2/3 FPGAs.
+ pre and post configuration callback are now optional and
+ not called when the function pointer is set to NULL.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:34 2007 +0100
+
+ Improve configuration of FPGA subsystem
+
+ This patch removes the FPGA subsystem configuration through
+ the CONFIG_FPGA bitmask configuration option.
+
+ See README for the new options:
+
+ CONFIG_FPGA,
+ CONFIG_FPGA_<vendor>,
+ CONFIG_FPGA_<family>
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 95c6bc7d4a3588b452baca610f8c795a83630477
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:55:17 2007 +0100
+
+ Add Epson RX8025 RTC support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:57:23 2007 +0100
+
+ serial: Make default_serial_console() a weak function
+
+ With this patch it is possible to reimplement default_serial_console()
+ in board specific code. This will be done in the upcomming PMC440
+ U-Boot port. This also allows the lwmon board maintainer to
+ remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:14:47 2007 +0100
+
+ add 'terminal program' functionality
+
+ This patch adds a 'cu' like serial terminal command to u-boot
+ using which you can access other serial ports from the system console.
+
+ OpenMoko uses this in their Neo1973 phones to get access to the GSM
+ Modem and GPS chip from the bootloader.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:12:53 2007 +0100
+
+ Re-introduce the 'nand read.oob' and 'nand write.oob' commands
+ that used to exist with the legacy NAND code
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit f540c42d9564854b19ce9bbb70affe172529fe70
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:09:58 2007 +0100
+
+ Fix building with CRAMFS but not JFFS2 support
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 23d0baf967fecdaf1804f045f6339337c5607eec
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 22 15:52:58 2007 +0100
+
+ Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 23776ff292966a85d811126933830bed48211826
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 11 10:53:12 2007 +0100
+
+ ARM: support board-specific ethernet PHY init
+
+ Add until the new phylib will be arrived
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 8 16:34:08 2007 +0100
+
+ IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 9 11:01:10 2007 +0100
+
+ Add missing file in gitignore and comments
+
+ based on Linux source tree's .gitignore files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 11:36:21 2008 +0100
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b2e2142c500c48a57f18f9dd30e66c13caea0971
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:38:58 2008 +0100
+
+ POST: Execute SPR test after relocation
+
+ On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
+ self modifying code and this doesn't work with stack in d-cache, since
+ I can't move the code from d-cache to i-cache. We move the SPR test to
+ be executed a little later, after relocation. Then stack is located in
+ SDRAM and this self-modifying code is no problem anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:28:20 2008 +0100
+
+ ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
+
+ This patch configures the LWMON5 port to use d-cache as init-ram and
+ the unused GPT0_COMP6 as POST WORD storage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1754f50b710194f886b6f2831803d8960171a14d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:25:46 2008 +0100
+
+ ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
+
+ The privious 4xx POST implementation only supported storing the POST
+ WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
+ we need to store the POST WORD in some other non volatile location.
+ This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
+ a location.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:23:16 2008 +0100
+
+ ppc4xx: Add 44x cache locking to better support init-ram in d-cache
+
+ This patch adds support for locking the init-ram/stack in d-cache,
+ so that other regions may use d-cache as well
+
+ Note, that this current implementation locks exactly 4k of d-cache,
+ so please make sure that you don't define a bigger init-ram area. Take
+ a look at the lwmon5 440EPx implementation as a reference.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0ddb89601a8d29e808db450366752ffdc6267c53
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 10:16:33 2008 +0100
+
+ Fix memset bug in ext2fs_read_file()
+
+ ext2fs_read_file() had the function arguments swapped.
+
+ Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Tue Jan 5 08:17:15 1988 +0100
+
+ Fix problems with usb storage devices on MPC5200 /TQM5200
+
+ The MPC5200 OHCI controller operates in big endian, so
+ CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 8 22:58:27 2008 +0100
+
+ Fix compile problem with new env code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 64b3727b9779d86127cd576e392a987de5ebb9fd
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Tue Nov 27 10:23:20 2007 +0100
+
+ tools: fix fw_printenv tool to compile again
+
+ This patch updates the fw_printenv/fw_setenv userspace tool to include
+ the correct MTD header in order to compile against current kernel
+ headers. Backward compatibility is preserved by introducing an option
+ MTD_VERSION which can be set to "old" for compilation using the old MTD
+ headers. Along with this a number of warnings are fixed.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:40:09 2008 +0100
+
+ ppc4xx: assign PCI interrupts on seuqoia boards
+
+ Some operating systems rely on assigned PCI interrupts.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:50:49 2008 +0100
+
+ ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
+
+ This patch allows the use of 4xx interrupt vector number defines
+ in board specific code outside cpu/ppc4xx.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:39:01 2008 +0100
+
+ ppc4xx: Fix UIC2 vector number base
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 12:49:58 2008 +0100
+
+ ppc4xx: Update PLB/PCI divider for PMC440 board
+
+ This patch updates the PLB/PCI divider when running at
+ 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 11:13:09 2008 +0100
+
+ ppc4xx: Disable error message when no NAND chip is installed on PMC440
+
+ Add CFG_NAND_QUIET_TEST option to disable error message when
+ no NAND chip is installed on PMC440 boards.
+
+ Disable a couple of config defines that are only used for NAND_U_BOOT.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 8 22:58:27 2008 +0100
+
+ Fix compile problem with new env code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6de66b35426312a21174a9bf0576a094e2904bea
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Tue Nov 27 10:23:20 2007 +0100
+
+ tools: fix fw_printenv tool to compile again
+
+ This patch updates the fw_printenv/fw_setenv userspace tool to include
+ the correct MTD header in order to compile against current kernel
+ headers. Backward compatibility is preserved by introducing an option
+ MTD_VERSION which can be set to "old" for compilation using the old MTD
+ headers. Along with this a number of warnings are fixed.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit ad3006fe7e84667021753b74247b0bafd97ba35f
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jan 7 23:47:32 2008 -0500
+
+ LIBFDT: use memmove() instead of memcpy()
+
+ This is partial patch from the DTC/libfdt
+ commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
+ Author: David Gibson <david@gibson.dropbear.id.au>
+ Date: Wed Nov 21 11:56:14 2007 +1100
+
+ The patch also fixes one genuine bug caught by valgrind -
+ _packblocks() in fdt_rw.c was using memcpy() where it should have been
+ using memmove().
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit aec7135bc300e3340d18f203347ee00c5b5f68c0
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Dec 17 14:42:07 2007 +1100
+
+ libfdt: Add more documentation (patch the seventh)
+
+ This patch adds more documenting comments to libfdt.h. Specifically,
+ these document the read/write functions (not including fdt_open_into()
+ and fdt_pack(), for now).
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Dec 17 14:41:52 2007 +1100
+
+ libfdt: Add more documentation (patch the sixth)
+
+ This patch adds some more documenting comments to libfdt.h.
+ Specifically this documents all the write-in-place functions.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Dec 29 22:45:27 2007 -0500
+
+ Fine grained per property /chosen updating.
+
+ Implement a suggestion by Scott Wood to make the /chosen handling fine
+ grained. Don't overwrite pre-existing properties on a per-property basis,
+ so if /chosen exists but a necessary /chosen/property doesn't, it gets
+ created. If a /chosen property exists, it is NOT overwritten unless the
+ "force" flag is true.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Jan 5 15:33:29 2008 -0500
+
+ Improve the FDT help message.
+
+ Add a note that "fdt copy" makes the new address active.
+ Remove most of the extra hints at the end of the fdt help.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Jan 5 14:52:04 2008 -0500
+
+ Support setting FDT properties with optional values.
+
+ Fix a bug found and documented by Bartlomiej Sieka where the optional
+ value on "fdt set <path> <prop> [<val>]" wasn't optional.
+
+ => fdt mknode / testnode
+ => fdt print /testnode
+ testnode {
+ };
+ => fdt set /testnode testprop
+ => fdt print /testnode
+ testnode {
+ testprop;
+ };
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 22fb2246df91bfc840d87f0c5910818bad55577a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 11:56:30 2007 +0100
+
+ Add fdt_find_and_setprop() to fdt_support.h
+
+ fdt_find_and_setprop() is used by several 4xx boards and it's
+ missing in the appropriate header. This patch eliminates a
+ warning when building U-Boot for such boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 802b769bac17b0560d3535a42c502469ee190cd1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 8 18:39:30 2008 +0100
+
+ ppc4xx: Return 0 on success in 4xx ethernet driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6775c68683a53c7abc778774641aac6f833a2cbf
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 8 09:59:49 2008 -0600
+
+ mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 16:28:34 2007 -0600
+
+ mpc83xx: rm remaining FLAT_TREE code
+
+ ..in board pci.c files
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b3458d2cd55d01732e30a76d898afd99e871cd67
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 15:57:28 2007 -0600
+
+ mpc83xx: remove FLAT_TREE code
+
+ need to rm it from pci code, too!
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b8bc606c61456566af6912f818a153b6b06f242
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 14:09:22 2007 -0600
+
+ mpc83xx: convert to using do_fixup_*()
+
+ convert to using simpler mpc85xx style fdt update code; streamline by
+ eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
+ the old school FLAT_TREE code from 83xx (since the sbc8349 was just
+ converted over to using libfdt).
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:58:51 2007 -0500
+
+ sbc8349: enable libfdt by default on WRS SBC8349 board.
+
+ Make libfdt the default for the WRS SBC8349 board.
+ Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
+ done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:58:16 2007 -0500
+
+ sbc8349: migrate board to libfdt
+
+ This adds libfdt support code for the Wind River sbc8349 board.
+
+ Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
+ the other Freescale 83xx boards.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:56:19 2007 -0500
+
+ sbc8349: Remove board specific ECC code
+
+ ECC code is now shared for all 83xx boards, so remove board specific one.
+ See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 01:30:48 2007 -0600
+
+ mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
+
+ continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ccf21c311e68d48399eff1e72936052885f6e3f7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Dec 6 16:43:40 2007 +0100
+
+ Add support CONFIG_UEC_ETH3 in MPC83xx
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit e6af9932d31171e35db880e7b2f29f903b1b7660
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:00:54 2007 -0600
+
+ Remove CONFIG options related to OF that we dont use
+
+ The MPC8360E MDS config defined:
+ CONFIG_OF_HAS_BD_T
+ CONFIG_OF_HAS_UBOOT_ENV
+
+ Which we don't use or ever needed. This seems like copy-paste feature creep.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f602082b4b7ed4ee16432067cc67a0a24fedc715
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Dec 10 14:16:22 2007 -0600
+
+ mpc83xx: supress compiler warning
+
+ mpc8360emds.c: In function ‘ft_board_setup’:
+ mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
+ mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 27 14:17:29 2007 -0600
+
+ mpc83xx: fix remaining fdt_find_node_by_path references
+
+ rename to fdt_path_offset
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 921d4b19ad1be704df58725485d9292dc0414adf
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Nov 19 12:30:09 2007 -0600
+
+ mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
+
+ Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
+ This change guarantees that the environment will be located on the
+ first flash sector after the U-Boot image.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Nov 9 14:28:08 2007 -0600
+
+ mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
+
+ u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
+ properties in the device tree so the PHY gets configured for internal delay on
+ RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:41:15 2007 +0800
+
+ mpc83xx: update the CREDITS and MAINTAINERS
+
+ update the CREDITS and MAINTAINERS.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit b21add4b42af7b767448251b599b91066a160e0d
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:40:21 2007 +0800
+
+ mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
+
+ Add the MAINTAINER and MAKEALL entries for mpc837xemds
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit f8900ce9094c462355eb792eea264ff16ac8fd16
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:38:53 2007 +0800
+
+ mpc83xx: Add the MPC837xEMDS board readme
+
+ Add the README.mpc837xemds to /doc
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:37:57 2007 +0800
+
+ mpc83xx: Add the support of MPC837xEMDS board
+
+ The MPC837xEMDS board support:
+ * DDR2 400MHz hardcoded and SPD init
+ * Local bus NOR Flash
+ * I2C, UART, MII and RTC
+ * eTSEC RGMII
+ * PCI host
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 555da61702771fe0f76f3de23b4e7590f3704161
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:36:58 2007 +0800
+
+ mpc83xx: Add the support of MPC8315E SoC
+
+ The MPC8315E SoC including e300c3 core and new IP blocks,
+ such as TDM, PCI Express and SATA controller.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 03051c3d35c9981ceaa059005660e699f3eacf1c
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:36:11 2007 +0800
+
+ mpc83xx: Add the support of MPC837x SoC
+
+ The MPC837x SoC including e300c4 core and new IP blocks,
+ such as SDHC, PCI Express and SATA controller.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Nov 14 18:54:53 2007 +0300
+
+ MPC8360E-MDS: configure and enable second UART
+
+ Despite user manual, BCSR9.7 is negated (high) on HRST, so
+ UART2 is disabled. Fix that and configure QE pins properly.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit b2893e1fcb28fad8c8b317104df8cee0142c7631
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Nov 5 09:34:06 2007 -0600
+
+ 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
+
+ Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
+ currently-defined 83xx boards. This change guarantees that the environment
+ will be located on the first flash sector after the U-Boot image.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e05329516a13616b53240cd85b739217c2bf87f1
+Author: Larry Johnson <lrj@acm.org>
+Date: Fri Jan 4 13:27:02 2008 -0500
+
+ ppc4xx: Remove weak binding from common Denali data-eye search code
+
+ Now that there are no board-specific versions of
+ "denali_core_search_data_eye()", the weak binding on the common version
+ can be removed.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 5ba576c01602fd328800a427964c36a0a05c5dce
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 09:13:46 2008 +0100
+
+ ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 09:12:41 2008 +0100
+
+ ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
+
+ On Katmai the complete auto-calibration somehow doesn't seem to
+ produce the best results, meaning optimal values for RQFD/RFFD.
+ This was discovered by GDA using a high bandwidth scope,
+ analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ so now on Katmai "only" RFFD is auto-calibrated.
+
+ This patch also adds RDCC calibration as mentioned on page 7 of
+ the AMCC PowerPC440SP/SPe DDR2 application note:
+ "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 49db47b8ae6afff2b898be312948ff501357dc80
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 16:48:42 2008 +0100
+
+ ppc4xx: Remove sdram.h from PMC440 board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 16:48:34 2008 +0100
+
+ ppc4xx: use common denali core defines and data eye search code for PMC440
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 12:05:14 2008 +0100
+
+ ppc4xx: More cleanup for esd's LCD code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 4 12:00:01 2008 +0100
+
+ ppc4xx: Fix Sequoia NAND booting target
+
+ The Sequoia NAND booting target now uses the recently extracted
+ cpu/ppc4xx/denali_data_eye.c file too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Thu Jan 3 15:02:02 2008 -0500
+
+ ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Fri Jan 4 02:11:56 2008 -0500
+
+ ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
+
+ Note: this patch changes the configuration of some GPIO registers:
+
+ Register Old Value New Value
+ --------------- ---------- ----------
+ DCR GPIO0_TCR 0x0000000F 0x0000F0CF
+ DCR GPIO0_TSRH 0x55005000 0x00000000
+ DCR GPIO1_TCR 0xC2000000 0xE2000000
+ DCR GPIO1_TSRL 0x0C000000 0x00200000
+ DCR GPIO1_ISR2L 0x00050000 0x00110000
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 5ab884b254ca2e707ab50545cd705f30108cf491
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Thu Jan 3 18:54:00 2008 -0500
+
+ ppc4xx: Add functionality to GPIO support
+
+ This patch makes two additions to GPIO support:
+
+ First, it adds function gpio_read_in_bit() to read the a bit from the
+ GPIO Input Register (GPIOx_IR) in the same way that function
+ gpio_read_out_bit() reads a bit from the GPIO Output Register
+ (GPIOx_OR).
+
+ Second, it modifies function gpio_set_chip_configuration() to provide
+ an additional option for configuring the GPIO from the
+ "CFG_4xx_GPIO_TABLE".
+
+ According to the 440EPx User's Manual, when an alternate output is used,
+ the three-state control is configured in one of two ways, depending on
+ the particular output. The first option is to select the corresponding
+ alternate three-state control in the GPIOx_TRSH/L registers. The second
+ option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
+ the GPIOx_TRSH/L registers, and set the corresponding bit in the
+ GPIOx_TCR register to enable the output. For example, the Manual
+ specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
+ the alternate three-state control (first option), and specifies
+ configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
+ enabled in the GPIOx_TCR register (second option).
+
+ Currently, gpio_set_chip_configuration() configures all alternate signal
+ outputs to use the first option. This patch allow the second option to
+ be selected by setting the "out_val" element in the table entry to
+ "GPIO_OUT_1". The first option is used when the "out_val" element is
+ set to "GPIO_OUT_0". Because "out_val" is not currently used when an
+ alternate signal is selected, and because all current GPIO tables set
+ "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
+ not change any existing configurations.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 196404cdc1de495d6182e84731c200fc5748df15
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:54 2007 -0500
+
+ PPC4xx: Remove sdram.h from board/lwmon5
+
+ These definitions are now in "include/ppc440.h".
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:32 2007 -0500
+
+ PPC4xx: Use common code for LWMON5 board SDRAM support
+
+ This patch also modifies the functionality of the code so that the data-eye
+ search is now done with with the cache disabled.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 62cc3951ab72135d9c101f1845b794e63a0fa189
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:14 2007 -0500
+
+ PPC4xx: Remove sdram.h from board/amcc/sequoia
+
+ These definitions are now in "include/ppc440.h".
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:00:50 2007 -0500
+
+ PPC4xx: Use common code for Sequoia board SDRAM support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 8b0c5c127690335758100c25eaec2b84db97c101
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:58:41 2007 +0100
+
+ net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
+
+ When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
+ networking stack does not automatically switch to
+ another interface. This patch does not touch the default
+ behavior.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
+Author: Upakul Barkakaty <upakul@gmail.com>
+Date: Thu Nov 29 12:16:13 2007 +0530
+
+ NET: Proper return code handling in eth_init() function in file eth.c
+
+ This patch modifies the return code handling in the eth_init()
+ function, to be compatible with the handling of the return codes in
+ the other network stack files. It now returns a 0 on Success and -1 on
+ error.
+
+ Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5ca2d0953e4579a80810966cca2077e20d912c97
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Mon Nov 19 20:27:04 2007 +0900
+
+ net/eth.c: Fix env_enetaddr signed overflow
+
+ Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
+ warned as below:
+
+ U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
+
+ DRAM: 256 MB
+ Flash: 32 MB
+ In: serial
+ Out: serial
+ Err: serial
+ Net: NEC-Candy
+ Warning: NEC-Candy MAC addresses don't match:
+ Address in SROM is 00:00:4C:80:92:A2
+ Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
+
+ This patch changes env_enetaddr type from `char' to `unsigned char'.
+
+ Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f85b60710571b37293d2233933b76e2aa3db5635
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Dec 27 18:19:02 2007 +0100
+
+ Introduce new eth_receive routine
+
+ The purpose of this routine is receiving a single network frame, outside of
+ U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
+ U-Boot will let them utilise networking facilities. For sending a raw frame
+ the already existing eth_send() can be used.
+
+ The direct consumer of this routine is the newly introduced API layer for
+ external applications (enabled with CONFIG_API).
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5c740711f0ea5b51414b341b71597c4a0751be74
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jan 3 10:41:04 2008 -0600
+
+ 8610: Move include of config.h earlier.
+
+ Include config.h earlier in the set of #includes
+ so as to avoid a incidental and duplicate definition
+ of CFG_CACHELINE_SIZE.
+
+ Signed-off-by: Jon Loeliger
+
+commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Dec 4 10:53:34 2007 -0600
+
+ Don't slam #undef DEBUG in the 8641HPCN config file.
+
+ Doing so prevents it from being individually set
+ and useful in other files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Nov 28 14:47:18 2007 -0600
+
+ Convert MPC8641HPCN to use libfdt.
+
+ Assumes the presence of the aliases node in the DTS to
+ locate the ethernet, pci and serial nodes for fixups.
+
+ Use consistent fdtaddr and fdtfile in environment variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ce37422d0002e10490e268392e0c4e3028e52cec
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 2 14:06:26 2008 +0100
+
+ cfi_flash: Fix bug in flash_isset() to use correct 32bit function
+
+ This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
+ flash chips connected to a 32bit wide port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 15:58:44 2008 +0100
+
+ Fix compile problem introduced by "cleanup" commit 3dfd708c
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 15:54:45 2008 +0100
+
+ Make scripts and Makefiles POSIX compliant
+
+ The bash builtin versions of the "test" (resp. "[") command allow
+ using "==" for string comparisons, but POSIX compatible implemen-
+ tations (like /usr/bin/test) insist on using "=" only. On such systems
+ you will see:
+
+ $ /usr/bin/test a == a && echo OK
+ /usr/bin/test: ==: binary operator expected
+
+ This patch fixes Makefiles and scripts to use POSIX style.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 2 14:05:37 2008 +0100
+
+ cfi_flash: Fix bug in flash_isset() to use correct 32bit function
+
+ This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
+ flash chips connected to a 32bit wide port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 12:38:43 2008 +0100
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e174ac34adf5d5653df12bc3cf19c52063a71269
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 17:29:56 2007 +0100
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:24 2007 +0100
+
+ ppc4xx: Complete PMC440 board support
+
+ This patch brings the PMC440 board configuration file.
+ Finally it enables the PMC440 board support.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 407843a582560fc5231299561ab3c2b6b6cd3397
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:18 2007 +0100
+
+ ppc4xx: Add FPGA support and BSP commands for PMC440 boards
+
+ This patch adds some BSP commands and FPGA booting support
+ for esd's PMC440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:14 2007 +0100
+
+ ppc4xx: Add initial esd PMC440 board files
+
+ This patch adds the first files for the new esd PMC440 boards.
+ The next two patches will complete the PMC440 board support.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:36 2007 +0100
+
+ ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
+
+ - add EEPROM write protection for esd PLU405 boards.
+ - initialize NAND GPIOs
+ - use correct io accessors
+ - cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 77660c4b59055d621d2a8595bd4c18bb277268fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:44 2007 +0100
+
+ ppc4xx: use correct io accessors for esd's LCD code
+
+ This patch fixes esd's LCD dectection code to work correctly with
+ newer gcc versions.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:42 2007 +0100
+
+ ppc4xx: Maintenance patch for VOH405 boards
+
+ - add EEPROM write protection
+ - initialize NAND GPIOs
+ - use correct io accessors
+ - slow down I2C clock to 100kHz
+ - enable ext. I2C bus
+ - cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c05569066dbcba3fdf36d4d1943df265dc316a86
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 16:08:08 2007 +0100
+
+ ppc4xx: Enable 405EP PCI arbiter per default on all boards
+
+ In an attmemt to clean up the 4xx start.S file, I removed the enabling
+ of the internal 405EP PCI arbiter. This is needed for multiple other
+ 405EP platforms, like most of the esd 405EP. Now the internal PCI
+ arbiter is enabled again per default as it has been before.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 15:53:46 2007 +0100
+
+ ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 06:06:04 2007 +0100
+
+ ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
+
+ Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
+ platforms mentioned above.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b568fd25574181a3b12ae3d66b2913903442cb83
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:03:46 2007 +0100
+
+ Remove CPCI440 board
+
+ This board never left prototyping state and it
+ became a millstone round my neck. So remove it.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c591dffe0cbacd896ccbad06011fe6d6afa080da
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 11:28:51 2007 -0500
+
+ Add support for Korat PPC440EPx board
+
+ These patches add support for the PPC440EPx-based "Korat" board to
+ U-Boot. They are based primarily on support for the Sequoia board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:16:25 2007 -0500
+
+ Add configuration file for Korat board
+
+ This patch supplies the configuration file for the Korat PPC440EPx-
+ processor board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:16:11 2007 -0500
+
+ Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit aba19604d848b2838cfb9ebe818909e6a216058e
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 10:54:48 2007 -0500
+
+ Add 440EPx DDR2 SPD DIMM support
+
+ This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
+ controller. It should also work on the 440GRx. It is based on the DDR2
+ SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
+
+ This code has been tested on prototype Korat boards with three Kingston
+ DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
+ (two ranks). The Korat board has a single DIMM socket, but support has
+ been provided (though not tested) for boards with two DIMM sockets.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:15:30 2007 -0500
+
+ Copy 440EPx/GRx SDRAM data-eye search to common directory
+
+ This patch creates a non-board-specific file for performing the SDRAM
+ data-eye search. It also adds ECC error checking to the test of valid
+ data on readback when ECC is enabled.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c46f53333b22b1f9098676bea8884fc7db820cf3
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:15:13 2007 -0500
+
+ Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
+
+ This patch adds the Denali SDRAM controller definitions to "ppc440.h".
+ It also fixes two typos in the definitions, so the board-specific
+ "sdram.h" files containing these definitions are also fixed to avoid
+ compiler warnings.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c348578bf612d0c56d8d376d23cae16defbd86af
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 10:50:55 2007 -0500
+
+ Add Ethernet 1000BASE-X support for PPC4xx
+
+ This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
+ is defined, the PHY will advertise it's capabilities for autonegotiation
+ based on the capabilities shown in the PHY's status registers, including
+ 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
+ advertise hard-coded capabilities, as before.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 09:52:17 2007 -0500
+
+ Add driver for National Semiconductor LM73 temperature sensor
+
+ This driver is based on the driver for the LM75.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 12618278688ea9b3d76536960a5ad2e3790fac40
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:14:00 2007 -0500
+
+ Add driver for STMicroelectronics M41T60 RTC
+
+ This driver is based on the driver for the M41T11. In the intended
+ application, the RTC will be powered by a large capacitor, rather than a
+ battery. The driver therefore checks to see whether the RTC has lost
+ power. The chip's OUT bit is normally reset from its power-up state. If
+ the OUT bit is read as set, or if the date and time are not valid, then the
+ RTC is assumed to have lost power, and its date and time are reset to
+ 1900-01-01 00:00:00.
+
+ Support for adjusting the speed of the clock to improve accuracy is
+ provided through an environment variable.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit d3471173e14b7544bb60339eda8d3d3906694b0a
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:39 2007 -0500
+
+ Use out_be32() and friends to access memory-mapped registers in sequoia.c
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c68f59fe3ec16769f82b5fca7421983c336d3aac
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:20 2007 -0500
+
+ Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:23:50 2007 -0500
+
+ Cosmetic changes to ECC POST for AMCC Denali core
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 2e583d6c81034f80a267b89fa55498ae063ccef1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 26 20:20:19 2007 +0100
+
+ ppc4xx: Fix compilation problem in 405 cache POST test
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:20:09 2007 +0100
+
+ ppc4xx: Move virtual address of POST cache test to bigger address
+
+ On Sequoia & LWMON5 the virtual address of the POST cache test is now
+ moved to a bigger address. This enables usage of more memory on those
+ boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d91722102cf63f77a0148ed3f3d54a26d87575e9
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:18:26 2007 +0100
+
+ ppc4xx: Fix problem in 44x cache POST routine
+
+ As repoted by Larry Johnson, running "diag run cache" caused a crash
+ in U-Boot. This problem was introduced by a patch that removed the
+ TLB entry for the cache test after the test has completed. Since this
+ TLB was only setup once, a 2nd attempt to run this cache test
+ failed with a crash. Now this TLB entry is created every time the
+ routine is called.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b0265b576bb8fa9465f99e99c323768b562fadc2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 21 07:51:29 2007 +0100
+
+ ppc4xx: Update Makalu fdt support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 19 09:05:40 2007 +0100
+
+ ppc4xx: Add fdt support to AMCC Katmai eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 328a340392a5df9aaf00792be989df73e750859e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 18 08:44:51 2007 +0100
+
+ ppc4xx: fdt: Cleanup setup of cpu node setup
+
+ Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
+ without using the absolute path to the cpu node. This makes it possible
+ to use this U-Boot version with both versions of cpu-node naming
+ "cpu@0" and the former "PowerPC,440EPx@0".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 17 17:26:21 2007 +0100
+
+ ppc4xx: Fix lwmon5 compilation problem
+
+ Now that the 440EPx ECC test is not board specific anymore
+ remove this Makefile.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
+Author: Anatolij Gustschin <agustschin@t-online.de>
+Date: Wed Dec 5 17:43:20 2007 +0100
+
+ Fix ppc4xx clear_bss() code
+
+ ppc4xx clear_bss() fails if BSS segment size is not
+ divisible by 4 without remainder. This patch provides
+ fix for this problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Nov 30 18:35:11 2007 +0100
+
+ PPC4xx: Minimal changes to add vxWorks support
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 052440b022ca8981d39b6f8c10d1aa6326f47480
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Fri Nov 23 13:09:18 2007 +0100
+
+ ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
+
+ When using dhcp/bootp the "netmask" environment variable is not
+ set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
+ desireable, so the following patch adds this this option to the board
+ config.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:15 2007 -0400
+
+ Fix/enhance ECC POST for 440EPx/GRx
+
+ This patch allows the ECC POST to be used for different boards with the
+ PPC440 Denali SDRAM controller. Modifications include skipping the test
+ if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
+ to prevent timing errors.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:05 2007 -0400
+
+ PPC4xx: Move/rename ECC POST for 440EPx/GRx
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c29d2d3680046d430022c55e50fcb27f5866517e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:20:33 2007 +0100
+
+ ppc4xx: use correct io accessors for 4xx ethernet POST
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ba79fde58a48c0a6ff8e2a96caba951594142203
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:19:56 2007 +0100
+
+ ppc4xx: fix flush + invalidate_dcache_range arguments
+
+ flush + invalidate_dcache_range() expect the start and stop+1 address.
+ So the stop address is the first address behind (!) the range.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 14 08:41:29 2007 +0100
+
+ ppc4xx: fdt: use fdt_fixup_ethernet()
+
+ By using aliases in the dts file, the ethernet node fixup is
+ much easier with the recently added functions.
+
+ Please note that the dts file needs the aliases for this to work.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 136288847e3b04f2ff357a067ad45e10afa0a24c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 27 07:50:54 2007 +0100
+
+ cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
+
+ The check for an sufficiently erased destination was missing in the
+ buffered write function of the cfi flash driver (when
+ CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
+ writing to such a region will fail with the currect error message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Nov 12 10:56:17 2007 +0100
+
+ Some configuration updates for the TQM5200 based TB5200 board:
+
+ - enable command line history
+ - increase malloc space (because of bigger flash sectors)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit e318d9e9021a0af7508171f84ed09d0e79f0284e
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 11:10:08 2007 +0200
+
+ TQM8xx: use the CFI flash driver on all TQM8xx boards
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 11d9eec479b470eab9242ab937fca70a876d9376
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: adjust for doubled flash sector size + some minor fixes
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM885D: Exchanged SDRAM timing by a more relaxed timing.
+
+ CAS-Latency=2, Write Recovery Time tWR=2
+ The max. supported bus frequency is 66 MHz. Therefore, changed
+ threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit b988b8cd443989be65161888eea0127ad03f846f
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: use calculated cpuclk instead of measuring it
+
+ On the TQM885D the measurement of cpuclk with the PIT reference
+ timer ist not necessary. Since all module variants use the same
+ external 10 MHz oscillator, the cpuclk only depends on the PLL
+ configuration - which is readable by software.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 492c7049869348d31168de8dad89651315e468e0
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM885D: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 128. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit dabad4b9bc46908e301f73ce76b38b23626a96e9
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM860M: Support for 10col SDRAMs, max. 128 MiB
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 61fb15c516fef5631e305f1976d7b3a679725856
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 27 01:52:50 2007 +0100
+
+ Fix coding style issues; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:18 2007 +0100
+
+ cfi_flash: Add manufacturer-specific fixups
+
+ Run fixups based on the JEDEC manufacturer ID independent of the
+ command set ID.
+
+ This changes current behaviour: Previously, geometry reversal for AMD
+ chips were done based on the command set ID, while they are now done
+ based on the JEDEC manufacturer and device ID.
+
+ Also add fixup for top-boot Atmel chips. A fixup is needed for
+ AT49BV6416(T) too, but since u-boot currently only reads the low byte
+ of the device ID, there's no way to tell it apart from AT49BV642D,
+ which should not have this fixup. Since AT49BV642D support is
+ necessary to get ATNGW100 board support into mainline, I've commented
+ out the fixup for now.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:17 2007 +0100
+
+ cfi_flash: Add cmdset-specific init functions
+
+ Move things like reading JEDEC IDs and fixing up geometry reversal
+ into separate functions. The geometry reversal fixup is now performed
+ by altering the qry structure directly, which makes the sector init
+ code slightly cleaner.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:16 2007 +0100
+
+ cfi_flash: Read whole QRY structure in one go
+
+ Read out the whole CFI Standard Query structure after successful cfi
+ identification. This allows subsequent code to access this information
+ directly without having to go through flash_read_uchar() and friends.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Dec 17 11:02:44 2007 +0100
+
+ AVR32: Fix logic inversion in disable_interrupts()
+
+ disable_interrupts() should return nonzero if interrupts were
+ _enabled_ before, not disabled.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 16:51:22 2007 +0100
+
+ AVR32: Enable interrupts at bootup
+
+ The timer code depends on the timer interrupt to keep track of the
+ upper 32 bits of the cycle counter. This obviously doesn't work when
+ interrupts are disabled the whole time.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 15 10:03:45 2007 +0100
+
+ AVR32: Fix wrong pin setup for USART3
+
+ As reported by Gerhard Berghofer:
+
+ in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+ instead of PB18 and PB19.
+
+ which is obviously correct. There's currently no code that uses
+ USART3, but custom boards may run into problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 1 12:44:20 2007 +0100
+
+ README: Remove ATSTK1000 daughterboard list
+
+ As noted by Kim Phillips, these lists tend to become out of date.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 30 14:56:36 2007 +0100
+
+ Add ATSTK100[234] to MAINTAINERS
+
+ Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+ "mother". Also update the entry for ATSTK1000 to be not only about the
+ AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1004 board
+
+ ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1003 board
+
+ ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:23:33 2007 +0100
+
+ AVR32: Make some AT32AP700x peripherals optional
+
+ Add a chip-features file providing definitions of the form
+
+ AT32AP700x_CHIP_HAS_<peripheral>
+
+ to indicate the availability of the given peripheral on the currently
+ selected chip.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:09:56 2007 +0100
+
+ AVR32: Rename at32ap7000 -> at32ap700x
+
+ The SoC-specific code for all the AT32AP700x CPUs is practically
+ identical; the only difference is that some chips have less features
+ than others. By doing this rename, we can add support for the AP7000
+ derivatives simply by making some features conditional.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:22:34 2007 +0200
+
+ atmel_mci: Show SR when block read fails
+
+ Show controller status as well as card status when an error occurs
+ during block read.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:34 2007 +0100
+
+ cfi_flash: Use map_physmem() and unmap_physmem()
+
+ Use map_physmem() and unmap_physmem() to convert from physical to
+ virtual addresses. This gives the arch a chance to provide an uncached
+ mapping for flash accesses.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:33 2007 +0100
+
+ Introduce map_physmem() and unmap_physmem()
+
+ map_physmem() returns a virtual address which can be used to access a
+ given physical address without involving the cache. unmap_physmem()
+ should be called when the virtual address returned by map_physmem() is
+ no longer needed.
+
+ This patch adds a stub implementation which simply returns the
+ physical address cast to a uchar * for all architectures except AVR32,
+ which converts the physical address to an uncached virtual mapping.
+ unmap_physmem() is a no-op on all architectures, but if any
+ architecture needs to do such mappings through the TLB, this is the
+ hook where those TLB entries can be invalidated.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:32 2007 +0100
+
+ cfi_flash: Introduce read and write accessors
+
+ Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+ them to access the flash memory. This makes it clearer when the flash
+ is actually being accessed; merely dereferencing a volatile pointer
+ looks just like any other kind of access.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:31 2007 +0100
+
+ Implement __raw_{read,write}[bwl] on all architectures
+
+ This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+ m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+ from Linux.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:36 2007 +0200
+
+ cfi_flash: Reorder functions and eliminate extra prototypes
+
+ Reorder the functions in cfi_flash.c so that each function only uses
+ functions that have been defined before it. This allows the static
+ prototype declarations near the top to be eliminated and might allow
+ gcc to do a better job inlining functions.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:29 2007 +0100
+
+ cfi_flash: Make some needlessly global functions static
+
+ Make functions not declared in any header file static.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:28 2007 +0100
+
+ cfi_flash: Break long lines
+
+ This patch tries to keep all lines in the cfi_flash driver below 80
+ columns. There are a few lines left which don't fit this requirement
+ because I couldn't find any trivial way to break them (i.e. it would
+ take some restructuring, which I intend to do in a later patch.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Dec 11 13:59:57 2007 +0100
+
+ CFI: synchronize command offsets with Linux CFI driver
+
+ Fixes non-working CFI Flash on the Inka4x0 board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:17:34 2007 -0600
+
+ Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+ On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+ (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:04:30 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Enabled CONFIG_CMD_ELF
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 04:59:26 2007 -0600
+
+ Handle Asynchronous DDR clock on 85xx
+
+ The MPC8572 introduces the concept of an asynchronous DDR clock with
+ regards to the platform clock.
+
+ Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+ mode.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:34:28 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Removed some misc environment setup
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:47:44 2007 -0600
+
+ Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:16:18 2007 -0600
+
+ Move the MPC8540 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:14:50 2007 -0600
+
+ Move the MPC8560 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:13:47 2007 -0600
+
+ Move the MPC8568 MDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:18:59 2007 -0600
+
+ Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+ We already had defines for LAWAR_TRGT_IF_* that we should use
+ rather than creating new ones. Also, added some missing defines for
+ PCIE targets.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:10:09 2007 -0600
+
+ Stop using immap_t on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+ instead of getting it via &immap.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:23:09 2007 -0600
+
+ Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:06:19 2007 -0600
+
+ Update MPC8568 MDS to use libfdt
+
+ Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Nov 14 15:52:06 2007 -0500
+
+ Add PCI Express support on MPC8568MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:11:44 2007 -0600
+
+ Update MPC85xx CDS to use libfdt
+
+ Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:54:27 2007 -0600
+
+ Update MPC8540 ADS to use libfdt
+
+ Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:40:31 2007 -0600
+
+ Update MPC8560 ADS to use libfdt
+
+ Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 00:36:33 2007 -0600
+
+ Stop using immap_t for cpm offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+ instead of getting it via &immap->im_cpm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 23:25:02 2007 -0600
+
+ Stop using immap_t for guts offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+ instead of getting it via &immap->im_gur.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 22:42:34 2007 -0600
+
+ Update MPC8544 DS config
+
+ * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+ * Removed some misc environment setup
+ * Moved to using fdtfile & fdtaddr as fdt env var names
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:12:24 2007 -0600
+
+ Update MPC8544DS to use libfdt
+
+ Updated the MPC8544DS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:15:30 2007 -0600
+
+ Add libfdt based ft_cpu_setup for mpc85xx
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 13:38:19 2007 +0100
+
+ ppc4xx: Correct GPIO offset in gpio_config()
+
+ Thanks to Gary Jennejohn for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8809a2713b1ceaf3da55d9d785470294f15de06a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 11:46:01 2007 +0100
+
+ rtc: Fix merging problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 14:47:34 2007 +0100
+
+ ppc4xx: 405EX: Correctly enable USB pins
+
+ This patch selects the USB data pins in the 405EX GPIO and MFC (multi
+ function control) registers. This is done for the AMCC Kilauea and
+ Makalu eval boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 08:25:09 2007 +0100
+
+ CFI: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Dec 7 23:35:02 2007 +0100
+
+ CFI: support JEDEC flash roms in CFI-flash framework
+
+ The following patch adds support for non-CFI flash ROMS, by hooking into the
+ CFI flash code and using most of its code, as recently discussed here in the
+ thread "Mixing CFI and non-CFI flashs".
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Nov 28 21:24:50 2007 -0500
+
+ Conditionally compile fdt_fixup_ethernet()
+
+ Fix compiler warnings: On boards that don't have ethernets defined,
+ don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 21:59:46 2007 -0600
+
+ Convert boards that set memory node to use fdt_fixup_memory()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:06:15 2007 -0600
+
+ Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+ We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+ determine which serial alias we should set linux,stdout-path to.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 14:57:45 2007 -0600
+
+ Add common memory fixup function
+
+ Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:19:12 2007 -0600
+
+ Conditionally compile fdt_support.c
+
+ Modify common/Makefile to conditionally compile fdt_support.c based
+ on CONFIG_OF_LIBFDT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 10:41:40 2007 -0600
+
+ Fix build breakage due to libfdt import
+
+ The IDS8247 got lost in the update and need an API update
+ do to rename of functions in libfdt.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Nov 23 19:43:20 2007 -0500
+
+ Add spaces around the = in the fdt print format.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Dec 7 01:25:38 2007 +0900
+
+ sh: Moved driver of the SuperH dependence
+
+ The composition of the directory in the drivers/ changed.
+ I moved SuperH serial driver and marubun PCMCIA driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:19 2007 +0100
+
+ Release v1.3.1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:03 2007 +0100
+
+ ADS5121 Board: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a27044b14a9e93678a82d7b35f202b93e7687abc
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 6 05:58:43 2007 +0100
+
+ ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
+
+ This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
+ setting the FIXD bit in the SDR0_MFR register. Here a description of the
+ symptoms:
+
+ Problem Description
+ ------------------------------
+ If a DMA is performed between memory and PCI with the DMA 1 Controller
+ using prefetch, and as a result uses a special purpose buffer selected by
+ the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
+ the first part of the transfer sequence is performed twice. The
+ PPC440SPe PCI Controller requests more data than was needed such that in
+ the case of enforce memory protection, a host CPU exception can occur.
+ No data is corrupted, because data transfer is stopped in the PCI
+ Controller. Prefetch enable is specified by setting DMA Configuration
+ Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
+
+ Behavior that may be observed in a running system
+ ---------------------------------------------------------------------------
+
+ 1. DMA performance is decreased because of the double access on the PCI bus
+ interface.
+ 2. If an illegal access to some address on the PCI bus is detected at the
+ system level, a machine check or similar system error may occur.
+
+ Workarounds Available
+ ----------------------------------
+
+ 1. Do not program prefetch. Note that a prefetch command cannot be programmed
+ without selecting a special purpose buffer.
+ 2. To avoid crossing a physical boundary of the PCI slave device, add 512
+ bytes of address to the PCI address range.
+
+ This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
+ from AMCC and slighly changed.
+
+ Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 4 16:29:48 2007 +0100
+
+ ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 3 00:15:28 2007 +0100
+
+ Prepare for 1.3.1-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e15e33433e7c05111968dc9b434a52fd42cbd221
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 30 07:15:41 2007 +0100
+
+ ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
+
+ This manual PCIe reset triggering solves the problem seen with the
+ Intel EPRO/1000 card, which was not detected (link not established)
+ upon power-up reset.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 01:21:54 2007 +0900
+
+ sh: Add SuperH boards maintainer to MAINTAINERS file
+
+ Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 00:13:04 2007 +0900
+
+ sh: Add ms7750se support in MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 27 09:44:53 2007 +0100
+
+ sh: Add sh3 and sh4 support in MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:51:17 2007 +0900
+
+ sh: Add document for SuperH.
+
+ This document is a summary of information concerning SuperH of U-Boot.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:39:31 2007 +0900
+
+ sh: Add marubun's pcmcia driver
+
+ Marubun pcmcia is a chip for PCMCIA used with SuperH.
+ Of course, this can be used even by other architectures.
+ When use this driver, came to be able to use CompactFlash
+ and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:32:13 2007 +0900
+
+ sh: Update SuperH SCIF driver
+
+ - Changed volatile unsigned to vu_.
+ - Changed Makefile for kconfig.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 8be760903645af09871be50ad0a6f9ebb62b311d
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 27 11:57:35 2007 +0100
+
+ ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
+
+ After an error in the AMCC 405EX users manual now correctly configure
+ IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
+ usage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 26 19:18:21 2007 +0100
+
+ Cleanup coding style; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 22:39:25 2007 +0100
+
+ MAKEALL: add missing 512x boards in ppc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a340c325e668ca7386c2276387681720be9c3757
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:06:14 2007 +0100
+
+ ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
+
+ As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
+ operation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca1ce226287270bb01e25b8e3674c701f12edf19
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:01:45 2007 +0100
+
+ ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 59829cc189378c142c13d2aa8d9a897d8bef3961
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:26:56 2007 +0100
+
+ drivers/mtd : move mtd drivers to drivers/mtd
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 318c0b90431f2648552e5ade78833f42652ce859
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:17:55 2007 +0100
+
+ drivers/misc : move misc drivers to drivers/misc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 33daf5b7858807cb4ce4158c2c56524671c14c08
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:13:59 2007 +0100
+
+ drivers/block : move block drivers to drivers/block
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c698dcaa70275eb8814f665b545547cee013892
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:59:50 2007 +0100
+
+ drivers/rtc : move rtc drivers to drivers/rtc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f868cc5a50757d94f36c312395481cb0f187d9e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:14:44 2007 +0100
+
+ drivers/hwmon : move hardware monitor drviers to drivers/hwmon
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:46:45 2007 +0100
+
+ drivers/input : move input drivers to drivers/input
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4558666293364fc3af1c1d9381ca933fa0f1275
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:40:11 2007 +0100
+
+ drivers/usb : move usb drivers to drivers/usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:33:38 2007 +0100
+
+ drivers/serial : move serial drivers to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 21 21:19:24 2007 +0100
+
+ drivers/net : move net drivers to drivers/net
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 352d259130b349fe9593b8dada641bd78a9659e5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:41:48 2007 +0100
+
+ drivers/video : move video drivers to drivers/video
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 73646217186aa17afc8e305c5f06f06dd335eaad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:33:09 2007 +0100
+
+ drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:28:09 2007 +0100
+
+ drivers/pci : move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9162352817579840d7802da6d85872b3ca003c97
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Nov 22 17:23:23 2007 -0500
+
+ Fix fdt printing for updated libfdt
+
+ Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 13:30:15 2007 -0600
+
+ Add additional fdt fixup helper functions
+
+ Added the following fdt fixup helpers:
+ * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
+ * do_fixup_by_compat{_u32} - Find matching nodes by compat
+
+ The _u32 variants work the same only the property they are setting
+ is know to be a 32-bit integer instead of a byte buffer.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 11:11:03 2007 -0600
+
+ Add fdt_fixup_ethernet helper to set mac addresses
+
+ Added a fixup helper that uses aliases to set mac addresses
+ in the device tree based on the bd_t
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dbaf07ce620aab249e3502b20a986234a6af1d3a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 14:07:46 2007 -0600
+
+ Fix warnings from import of libfdt
+
+ cmd_fdt.c: In function fdt_print:
+ cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8d04f02f6224e6983f4812ea4da704950ec8539c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 11:04:22 2007 -0500
+
+ Update libfdt from device tree compiler (dtc)
+
+ Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
+ the device tree compiler (dtc) project.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e93becf80d732b64aef81b23e8b6ece02c40533d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Nov 3 19:46:28 2007 -0500
+
+ Move do_fixup* for libfdt into common code
+
+ Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
+ into common/fdt_support.c and renamed:
+
+ do_fixup() -> do_fixup_by_path()
+ do_fixup_u32() -> do_fixup_by_path_u32()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f738b4a75998f42a7408defadc9baac7a31c92db
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 25 16:15:07 2007 -0500
+
+ Make no options to fdt print default to '/'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 10:21:57 2007 -0500
+
+ Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
+
+ Removed:
+ fdt_node_is_compatible
+ fdt_find_node_by_type
+ fdt_find_compatible_node
+
+ To ease merge of newer libfdt as we aren't using them anywhere at this time.
+
+ Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
+ reason.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98e2867cc85409b919f862e6c16026461ec955df
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 21 09:19:37 2007 -0700
+
+ [BUILD] Remove libraries when updating autoconf.mk
+
+ Fix library problems caused by conditional compilation. Using
+ autoconf.mk to decide which files to compile has caused a problem when
+ changing configuration from one board to another without clearing out
+ the library (*.a) files.
+
+ It used to be that the linker was always passed the same list of .o
+ files when building the .a files. However, that is not longer true
+ with conditional compilation. Now, a different board config will have
+ a different file list passed to the linker. The problem occurs when
+ a library has already been built and the board config is changed.
+
+ Since the linker will update instead of replace a preexisting library,
+ then if the file list changes to remove some object files the old
+ objects will still exist in the library.
+
+ The solution is to remove all old library files when autoconf.mk is
+ made.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 08:49:50 2007 -0600
+
+ [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
+
+ Modify libfdt/Makefile to conditionally compile the *.c files based
+ on the board config.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4a43719a7738712811d822ca8125427b27a55cdc
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ [BUILD] conditionally compile common/cmd_*.c in common/Makefile
+
+ Modify common/Makefile to conditionally compile the cmd_*.c files based
+ on the board config.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ [BUILD] Generate include/autoconf.mk from board config files
+
+ Use cpp and sed to postprocess config.h and import the defined values
+ into include/autoconf.mk. autoconf.mk is then included by config.mk to
+ give 'make' access to the board configuration.
+
+ Doing this enables conditional compilation at the Makefile level instead
+ of by wrapping every .c file with #ifdef/#endif wrappers.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 68b88999da87ab88e71e1306192905be3450198e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Nov 20 15:02:26 2007 -0600
+
+ 8610HPCD: Enable the 8610 Display Interface Unit
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Nov 20 15:00:53 2007 -0600
+
+ Move 8610 DIU interface structure definitions to header file.
+
+ These two structures are still needed during the
+ initialization and setup of the DIU hardware.
+ So move them to the fsl_diu_fb.h file for now.
+ Official "blah".
+
+ Noticed-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 080c646dbf474a109c3f85718fb01ce042a38c45
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:14:18 2007 +0100
+
+ drivers/i2c : move i2c drivers to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9a337ddc154a10a26f117fd147b009abcdeba75a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 19 22:20:24 2007 +0100
+
+ Prepare for 1.3.0 release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f30ad49b16bf998b03c1a5228b6c86369d61c258
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Mon Nov 19 10:02:13 2007 -0500
+
+ Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
+
+ CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit f8c320609366176b31104d9bf5e295232e1c7f1d
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Mon Nov 19 11:14:16 2007 +0900
+
+ [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
+
+ lowlevel_init.S: Assembler messages:
+ lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
+
+ Looking at codes, the `memtest' and `clearmem' are intentional mixed
+ use of `global symbols' and `label' for debugging purpose. To make it
+ build, just disable global-symbols-use for now. As a result `memtest'
+ still remains as unused, but leave it be...
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 19 12:59:14 2007 +0100
+
+ Fix build problems with mp2usb board
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6bf4c686afca1e86e1c384d59218f914605713bf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 18 18:36:11 2007 +0100
+
+ s3c24x0: Fix usb_ohci.c missing in Makefile
+ and usb_ohci.c warning differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6073f61e078da5ddb521b56256bcc36508589883
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 18 12:55:02 2007 +0100
+
+ pb1x00 board: Fix u16 status declaration when PCMCIA is defined
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 18 17:11:09 2007 +0100
+
+ Fix compiler warnings for ARM systems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 18 16:36:27 2007 +0100
+
+ Fix compiler warnings for PPC systems. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 653811a3c2b35856bf12e196dcc8c4694e28e420
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Nov 18 14:44:44 2007 +0100
+
+ ppc4xx: Correct 405EX PCIe UTL register mapping
+
+ Map 4k mem space for UTL registers for each port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 17 11:31:10 2007 +0100
+
+ Fix warning differ in signedness in net/net.c and net/nfs.c
+
+commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:42:45 2007 +0900
+
+ gth2.c: Fix a warning on gth2 build.
+
+ gth2.c: In function 'misc_init_r':
+ gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2309c130aa4c84b91bd874a41269c923eb61b555
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Nov 17 07:58:25 2007 +0100
+
+ Fix warning differ in signedness in common/cmd_scsi.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ea61b57968554eaf0f474ec7e088b17d367f474
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Nov 17 14:52:29 2007 +0100
+
+ ppc4xx: Update AMCC Kilauea config file
+
+ - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:26 2007 +0900
+
+ [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+ Current trick to pick up GNU assembler minor version does not work with the
+ latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
+ "(GNU Binutils) ".
+
+ $ sde-as --version |grep "GNU assembler"
+ GNU assembler 2.15.94 mipssde-6.02.02-20050602
+ $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
+ 2.15.94
+ $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+ 15
+ $
+
+ $ mips-linux-as --version |grep "GNU assembler"
+ GNU assembler (GNU Binutils) 2.18
+ $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
+ (GNU
+ $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+ (no output)
+ $
+
+ As a result of above, you'll see many noises with such binutils:
+
+ make -C cpu/mips/
+ /bin/sh: line 0: [: : integer expression expected
+ /bin/sh: line 0: [: : integer expression expected
+ make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
+ mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
+ /bin/sh: line 0: [: : integer expression expected
+ mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
+ /bin/sh: line 0: [: : integer expression expected
+ mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
+ /bin/sh: line 0: [: : integer expression expected
+
+ This patch simplifies the trick and makes it work with both versions of gas.
+ I also replace an expensive `awk (or gawk)' with `cut'.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16664f72850846e645616da1c0fa5afcd6d15f15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:26 2007 +0900
+
+ [MIPS] Remove useless instructions for initializing $gp.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 03c031d5660ea946c39af6e2e16267da857c609f
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:27:06 2007 +0900
+
+ [MIPS] MIPS 4K core: Coding style cleanups
+
+ No logical changes.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:20 2007 +0900
+
+ [MIPS] gth2.c: Fix a warning on gth2 build.
+
+ gth2.c: In function 'misc_init_r':
+ gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4fbd0741b2b6441da10be93e10267122581b7079
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:22:33 2007 +0900
+
+ [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
+
+ au1x00_eth.c: In function 'au1x00_miiphy_write':
+ au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f01320459736f156707425cf8112f98606301aa4
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:25 2007 +0900
+
+ [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
+
+ au1x00_eth.c: In function 'au1x00_enet_initialize':
+ au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
+ au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
+ au1x00_eth.c:246: error: for each function it appears in.)
+ au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
+ au1x00_eth.c: In function 'au1x00_miiphy_write':
+ au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
+ make[1]: *** [au1x00_eth.o] Error 1
+
+ Fixed by moving these two functions forward.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b09258c5393edd1087c5f39ae68338f16b49f8b3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:25 2007 +0900
+
+ MAKEALL: Added missing pb1000 board
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:24 2007 +0900
+
+ [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:24 2007 +0900
+
+ [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 5947f6999aafa7c54c1390983d264a8463dfea8e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 02:34:38 2007 +0100
+
+ Update CHANGELOIG, prepare for -rc4
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
+Author: Luotao Fu <l.fu@pengutronix.de>
+Date: Wed Nov 14 18:58:33 2007 +0100
+
+ Fix the i2c frequency and default address in rsdproto board
+
+ rsdproto board support has wrong I2C frequency and wrong return value
+ handling.
+
+ Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
+
+commit 429c180edad038f91c989cb14b478228092e7054
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 01:45:38 2007 +0100
+
+ powerpc: Backout relocation changes for MPC5121, too.
+
+ Apply Grant Likely's backout to MPC5121 code, too.
+
+ Pointed out by Rafal Jaworowski <raj@semihalf.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Nov 13 22:18:33 2007 -0700
+
+ powerpc: Backout relocation changes.
+
+ Ugh. I *hate* to back this change out, but these compiler flags don't
+ work for relocation on all versions of GCC. I've not been able to
+ reproduce the environment in my setup (and hence, not been able to
+ find a combination that *does* work), so I've got no choice but to go
+ back to the old gcc flags and linker script.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 13 09:11:05 2007 +0100
+
+ Fixed mips_io_port_base build errors.
+
+ This patch has been sent on:
+ - 29 Sep 2007
+
+ Although mips_io_port_base is currently a part of IDE command, it is quite
+ fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
+ it to MIPS general part, and introduce `set_io_port_base()' from Linux.
+
+ This patch is triggered by multiple definition of `mips_io_port_base' build
+ error on gth2 (and tb0229 also needs this fix.)
+
+ board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
+ /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
+ common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 01:30:40 2007 +0100
+
+ Fix a bug in the slave serial programming mode for the Xilinx
+ Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
+ the most significant bit was set, which did not work on any
+ architecture where "char" defaulted to be an unsigned type.
+
+ Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 1 12:23:29 2007 -0500
+
+ 86xx: Fix broken variable reference when #def DEBUGing.
+
+ Sometimes you can't reference the DDR2 controller variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:32:00 2007 +0800
+
+ make 8610 board use pixis reset
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ Unify pixis_reset altbank across board families
+
+ Basically, refactor the CFG_PIXIS_VBOOT_MASK values
+ into the separate board config files.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64bf555465c7926be13e1046ac0d0f05ac72829c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 7 08:19:21 2007 +0100
+
+ Fix warning: pointer targets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7a60ee7c6248a958c5757d3660a1702723a2786d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 7 08:19:19 2007 +0100
+
+ Fix warning differ in signedness in common/cmd_ide.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 16 14:16:54 2007 +0100
+
+ ppc4xx: Enable 405EX PCIe UTL register configuration
+
+ Till now the UTL registers on 405EX were not initialized but left with
+ their default values. This patch new initializes some of the UTL
+ registers on 405EX.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 16 14:00:59 2007 +0100
+
+ ppc4xx: Update AMCC Makalu for board rev 1.1
+
+ This patch adds changes needed for Makalu rev 1.1:
+
+ - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
+ - Enable 2nd ethernet port EMAC1
+ - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
+ - Reset PCIe ports via GPIO upon bootup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4d4faae65e115e327425cd514c1a35146a85166b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group PCI and PCMCIA drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5798f87dc10a496d79d3177b9f5a76488987fd35
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group block/flash drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit df58c81551700f058b44cacf55a7997fa63bfe0a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group USB drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group i2c drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ec00c76de0e5971273905998d62d6bb119324218
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group console drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 754f230aa01b8c789fc31f8013c2487954073300
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group network drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f0037c56b0d12cd46215124667b9f83d60ef9391
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Build: split COBJS value into multiple lines
+
+ This change is in preparation for condtitionial compile support in the
+ build system. By spliting them all into seperate lines now, subsequent
+ patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
+ be less invasive and easier to review
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Add .gitignore files
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 955413f35f054a82e40042f1dbcf501c6a05719b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:27:52 2007 -0700
+
+ Revert "Correct relocation fixup for mpc5xx"
+
+ This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e15633888a058aacb31a62d2cf1278e1e4c236ab
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:24:32 2007 -0700
+
+ Revert "Correct fixup relocation for MPC5xxx"
+
+ This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:21:04 2007 -0700
+
+ Revert "Correct fixup relocation for mpc8220"
+
+ This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 70922342369e5e39b286fe21e768a239ca07a514
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:57 2007 -0700
+
+ Revert "Correct fixup relocation for mpc824x"
+
+ This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:50 2007 -0700
+
+ Revert "Correct fixup relocation for mpc8260"
+
+ This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:43 2007 -0700
+
+ Revert "Correct fixup relocation for mpc83xx"
+
+ This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:25 2007 -0700
+
+ Revert "[MPC512x] Correct fixup relocation"
+
+ This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:25:09 2007 +0100
+
+ ppc4xx: Small AMCC Kilauea cleanup
+
+ Remove not needed pci_target_init() function.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aee747f19b460a0e9da20ff21e90fdaac1cec359
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:23:55 2007 +0100
+
+ ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
+
+ - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
+ - Cleanup of the 4xx GPIO functions
+ - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:20:08 2007 +0100
+
+ ppc4xx: AMCC Taihu board config file cleanup
+
+ This patch makes the AMCC Taihu a little more compatible to the other
+ AMCC eval boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:37:28 2007 +0100
+
+ [INKA4x0] NG hardware: flash support
+
+ Disabled and remove inka4x0 custom flash driver, use CFI flash
+ driver instead.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5fb6d7191e206cdde0e23140fd8111caed93a595
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:29:55 2007 +0100
+
+ [INKA4x0] NG hardware: SDRAM support
+
+ Add support for three new DDR chips that may be present on a NG
+ INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
+
+ Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f23cb34c367bb27585a4fdb8a75277370e7d0596
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:24:43 2007 +0100
+
+ [INKA4x0] NG hardware: platform code update
+
+ - Cleanup compile warnings.
+ - Add missing '\0' in default environment.
+ - Increase CFG_MONITOR_LEN to 256 KiB.
+ - Add required CFG_USE_PPCENV.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Thu Nov 15 08:58:00 2007 +0000
+
+ Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
+ Remove warnings re onenand_read() & write()
+
+commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Thu Nov 15 08:45:13 2007 +0000
+
+ Correction patch
+
+commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Sep 13 18:52:28 2007 +0800
+
+ Enable ULi1575 Ethernet support in 8610HPCD config
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 13 08:18:20 2007 +0100
+
+ ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 13 08:06:11 2007 +0100
+
+ ppc4xx: Fix 405EX PCIe UTLSET register setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ce55151c85d068f70317a8d65c61058b891afb4
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Nov 13 07:50:29 2007 +0100
+
+ [UC101] SRAM now with 2 MB working.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2d14684341109a69616e4d6016cd61402d55086f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:37:53 2007 +0100
+
+ ppc4xx: Use generic usb-ohci driver for sequoia board
+
+ This patch makes the sequoia board use the generic usb-ohci driver
+ instead of cpu/ppc4xx/usb_ohci.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:37:23 2007 +0100
+
+ ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
+
+ This patch disables the 44x d-cache on 'usb start' and
+ reenables it on 'usb stop'. This should be seen as a
+ temporary fix until the generic usb-ohci driver can
+ life with d-cache enabled.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:36:44 2007 +0100
+
+ ppc4xx: Remove redundant code from 4xx network driver
+
+ This patch removes some redundant code and decrements the end
+ address of cache flush and invalidate by 1.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5ca9881aad8c413ac2a82868a5e3719178254502
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Nov 9 15:24:26 2007 +0000
+
+ Add apollon board support
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit b53313dbfc74525d85f1e7e0102f902d5c863beb
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 9 12:19:58 2007 +0100
+
+ ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c7f69c340277935a6c19a956421852da944a365f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 9 12:18:54 2007 +0100
+
+ ppc4xx: Make output a little shorter on I2C bootrom detection
+
+ Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
+ already print a line with the information which I2C bootrom is
+ used for bootstrap configuration. So we don't need this extra line
+ with "I2C boot EEPROM en-/dis-abled".
+
+ This patch also has a little code cleanup integrated.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d737a28152ec12873f8544cca1fb39a49e5e693
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:50:18 2007 -0600
+
+ ColdFire: MCF5329 - Remove reset registers from CCM
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:31:11 2007 -0600
+
+ ColdFire: MCF5329 - Add Reset structure to immap_5329.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:19:01 2007 -0600
+
+ ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 225a24b5e062ad94627424508ae814f51dbe1a34
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 18:00:54 2007 -0600
+
+ ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 248c7c14835f34d5d910b45e5600050e58ca6cab
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 17:56:15 2007 -0600
+
+ ColdFire: MCF532x - Update do_reset() using core reset
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 17:51:00 2007 -0600
+
+ ColdFire: Update cpu flag for 4.2-xx compiler
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 070ba56115b4da63b46e974287fa4550d4023386
+Author: York Sun <yorksun@freescale.com>
+Date: Wed Oct 31 14:59:04 2007 -0500
+
+ 8610: Add console frame buffer support to FSL 8610 DIU driver.
+
+ Add cfb console support to FSL 8610 DIU driver.
+ Inspect board version from PIXIS to obtain correct pixel format.
+
+ Use #define CONFIG_VIDEO in config file to enable fb console.
+
+ To switch monitor, set monitor variable to
+ 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
+ followed by "diufb init".
+
+ Preserve logo bitmap at the top of the fb console.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a877880c6949e948bd63cd6ea4e216573d2f53dd
+Author: York Sun <yorksun@freescale.com>
+Date: Mon Oct 29 13:58:39 2007 -0500
+
+ 8610: Add 8610 DIU display driver
+
+ 1280x1024 and 1024x768 @ 32 bpp are supported now.
+ DVI, Single-link LVDS, Double-link LVDS are all supported.
+
+ Environmental variable "monitor" is used to specify monitor port.
+
+ A new command "diufb" is introduced to reinitialize monitor
+ and display a BMP file in the memory. So far, 1-bit, 4-bit,
+ 8-bit and 24-bit BMP formats are supported.
+
+ diufb init
+ - initialize the diu driver
+ Enable the port specified in the environmental variable "monitor"
+
+ diufb addr
+ - display bmp file in memory.
+ The bmp image should be no bigger than the resolution, 1280x1024
+ for DVI and double-link LVDS, 1024x768 for single-link LVDS.
+
+ Note, this driver allocate memory but doesn't free it after use
+ It is written on purpose -- to avoid a failure of reallocation
+ due to memory fragement.
+
+ ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon loeliger <jdl@freescale.com>
+
+commit 52e5ddfecdda308f75782fae206b677b1810f5f9
+Author: York Sun <yorksun@freescale.com>
+Date: Wed Oct 31 10:43:59 2007 -0500
+
+ FSL: Add a freescale bitmap logo.
+
+ This Freescale logo is a 340 x 128 x 4bpp BMP file
+ that can be displayed by the DIU Framebuffer driver.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
+Author: York Sun <yorksun@freescale.com>
+Date: Mon Oct 29 13:57:53 2007 -0500
+
+ 8610: Make some extra debug environment variables conditional.
+
+ One may #define ENV_DEBUG to get them back again.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ 8610: Actually enable pixis_reset CONFIGs
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit f3bceaab230b4748d0afc4109b6837308f018b40
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:31:59 2007 +0800
+
+ Fix the BAT definition of PCI IO on 8610 board
+
+ The address in the BAT register is aligned with the BAT size.
+ The original definition actually did not define BAT for PCIE2 IO.
+ This patch fix this.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ Unify pixis_reset altbank across board families
+
+ Basically, refactor the CFG_PIXIS_VBOOT_MASK values
+ into the separate board config files.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:32:00 2007 +0800
+
+ make 8610 board use pixis reset
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 1 12:23:29 2007 -0500
+
+ 86xx: Fix broken variable reference when #def DEBUGing.
+
+ Sometimes you can't reference the DDR2 controller variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Mon Nov 5 17:39:24 2007 +0800
+
+ Implement general ULi 526x Ethernet driver support in U-boot
+
+ This patch implements general ULi 526x Ethernet driver.
+ Until now, it is the only native Ethernet port on
+ MPC8610HPCD board, but it could be used on other boards
+ with ULi 526x Ethernet port as well.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Nov 1 08:46:50 2007 -0500
+
+ NET: Add Ethernet 1000BASE-X support for PPC4xx
+
+ This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
+ "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
+ returns non-zero iff the PHY registers are configured for 1000BASE-X. The
+ "mii info" command is modified to distinguish between 1000BASE-T and -X.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 298035df4948b113d29ac0e694717d34b95bc5dc
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Wed Oct 31 11:21:29 2007 -0500
+
+ NET: Cosmetic changes
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 654f38b3a387886996a5a75771fbfc29cb4f225e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 5 07:43:05 2007 +0100
+
+ ppc4xx: Make output a little shorter on PCIe detection
+
+ Now not max 3 lines but 2 lines are printed per PCIe port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 992742a5b09d9040adbd156fb90756af66ade310
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 3 23:09:27 2007 +0100
+
+ Cleanup coding style; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Nov 2 13:15:42 2007 -0700
+
+ fix wording in README
+
+ Changed the wording to properly describe the shadowing
+ of the environment from ROM to RAM
+
+ Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Wed Oct 31 02:18:15 2007 +0900
+
+ blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 25 16:08:14 2007 +0300
+
+ Trimmed some variables in ne2000.c
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
+
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+ The scan code of the key 'z' is 0x1d, which should be handled.
+
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:30:04 2007 +0800
+
+ Fix USB support issue for MPC8641HPCN board.
+
+ The configuration file has already enabled USB, but it
+ missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+ on MPC8641HPCN can not work because of the wrong USB
+ register endian.
+
+ And add the USB command to U-Boot commands list.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Oct 24 18:16:01 2007 +0200
+
+ Use config_cmd_default.h instead of config_cmd_all.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
+
+ TQM5200: Call usb_cpu_init() during board init
+
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 16:25:50 2007 +0200
+
+ Fix typo in nfs.c
+
+ An obvious typo. Originally fixed in linkstation u-boot port.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 14:35:05 2007 +0200
+
+ Fix a typo in cpu/mpc824x/interrupts.c
+
+ Since December 2003 the timer_interrupt_cpu() function in
+ cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+ parameter. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:13:51 2007 +0200
+
+ add ft_cpu_setup(..) on mpc8260
+
+ Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+ based on code from mpc5xxx
+
+ Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:18:42 2007 +0200
+
+ changes for IDS8247 board support
+
+ To get the IDS8247 board working following are done:
+ - FCC2 is deactivated
+ - FCC1 is activated
+ - I2C is activated
+ - CFI driver is activated
+ - Adapted for use with LIBFDT
+
+ Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Nov 3 12:08:28 2007 +0100
+
+ ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
+
+ This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
+ Again, only one image supports both targets.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 24 15:48:37 2007 +0200
+
+ ATSTK1002: Remove default ethernet addresses
+
+ Wolfgang is right: It's not a good idea to set up default initial
+ ethernet addresses for a board, even though they belong to the local
+ range.
+
+ This will change the failure mode from "IT manager screams at you for
+ using duplicate ethernet addresses" to a nice error message explaining
+ that the ethernet address hasn't been set properly.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
+
+ DHCP Client Fix
+
+ This is a multi-part message in MIME format.
+
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
+
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
+
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 5d96d40d3f36da33348e68f9ea993f383e11f997
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:58:34 2007 +0100
+
+ ppc4xx: Fix acadia_nand build problem
+
+ Since the cache handling functions were moved from start.S into cache.S
+ the acadia NAND booting Makfile needs to be adapted accordingly.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:57:11 2007 +0100
+
+ ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
+
+ This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
+ and to the Sequoia TLB init code. Now the cache can be enabled on 44x
+ boards by defining CONFIG_4xx_DCACHE in the board config file. This
+ option will disappear, when more boards use is successfully and no
+ more known problems exist.
+
+ This is tested successfully on Sequoia and Katmai. The only problem that
+ needs to be fixed is, that USB is not working on Sequoia right now, since
+ it will need some cache handling code too, similar to the 4xx EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:51:10 2007 +0100
+
+ ppc4xx: Enable CPU POST test for 4xx with dcache enabled
+
+ Now with caches enabled (i- and d-cache) on 44x, we need a chance to
+ disable the cache for the CPU POST tests, since these tests consist
+ of self modifying code. This is done via the new change_tlb() function.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f71b2888b4b3c870909a0341427b2a914246f81f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:47:26 2007 +0100
+
+ ppc4xx: Change 4xx POST ethernet test to handle cached memory too
+
+ This patch enables the 4xx EMAC POST driver to work too, when dcache is
+ enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a2685904061b35a17583d65fe47cdc2686a69eaa
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:45:53 2007 +0100
+
+ ppc4xx: Remove temporary TLB entry in POST cache test only for 440
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ff768cb168d8157c24a25016dbfbeb465e47f420
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 18:01:24 2007 +0100
+
+ ppc4xx: Change 4xx ethernet driver to handle cached memory too
+
+ This patch enables the 4xx EMAC driver to work too, when dcache is
+ enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 483e09a223c666269ef81d3573a6591b1046b0ef
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:59:22 2007 +0100
+
+ ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
+
+ This function is used to either turn cache on or off in a specific
+ memory area.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:57:52 2007 +0100
+
+ ppc4xx: Remove cache definition from 4xx board config files
+
+ All 4xx board config files don't need the cache definitions anymore.
+ These are now defined in common headers.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b94ac61d2176185c30adf0793e079ec30e68687
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:55:58 2007 +0100
+
+ ppc4xx: Rework 4xx cache support
+
+ New cache handling functions added and all existing functions
+ moved from start.S into seperate cache.S.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06713773da4ac3d390c63d82641eb553224b27c2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 18:03:12 2007 +0200
+
+ ppc4xx: Remove compiler warning from previous commit
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:40:30 2007 +0200
+
+ ppc4xx: Remove temporary TLB entry in POST cache test
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1338e6a81834099ba19733b69aafd8ef5f098094
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:05:08 2007 +0200
+
+ ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
+
+ I lately noticed, that newer 4xx board with GBit support sometimes don't
+ finish link autonegotiation in 4 seconds. Changing this timeout to 5
+ seconds seems fine here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:03:17 2007 +0200
+
+ ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
+
+ This patch changes all in32/out32 calls to use the recommended in_be32/
+ out_be32 macros instead.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 25 12:24:59 2007 +0200
+
+ ppc4xx: Fix POST ethernet test for Haleakala
+
+ The POST ethernet test needed to be changed to dynamically determine
+ the count of ethernet devices. This code is cloned from the 4xx
+ ethernet driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 11:31:05 2007 +0200
+
+ ppc4xx: Correct UART input clock calculation and passing to fdt
+
+ We now use a value in the gd (global data) structure for the UART input
+ frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
+ in get_sys_info().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 10:10:08 2007 +0200
+
+ ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
+
+ The Haleakala is nearly identical with the Kilauea eval board. The only
+ difference is that the 405EXr only supports one EMAC and one PCIe
+ interface. This patch adds support for the Haleakala board by using
+ the identical image for Kilauea and Haleakala. The distinction is done
+ by comparing the PVR.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9f798766aa85e62eb8fa8c721e148df609b78137
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Tue Oct 23 08:29:10 2007 +0200
+
+ ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
+
+ This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
+
+ Note:
+ As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
+ DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
+ modules are still plugged in. So it is recommended to remove the DIMM
+ modules while using the NAND booting code with the fixed SDRAM setup!
+
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 16:24:44 2007 +0200
+
+ ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3248f63ad89cb031491edb7016587fe6e9a238b9
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 16:22:40 2007 +0200
+
+ ppc4xx: Rework of 4xx serial driver (4)
+
+ Change 4xx_uart.c:
+
+ - Use in_8/out_8 macros instead of in8/out8
+ - No need for UART_BASE marco anymore, now really handled via function
+ parameter
+ - serial_init_common() introduced
+ - Further coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e61cb8163a66b8a135696ae232e2bead1ce0a049
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:45:49 2007 +0200
+
+ ppc4xx: Rework of 4xx serial driver (3)
+
+ Change all linker scripts to reference the changed driver name iop480_uart.o.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 882ae41274921f9016131806bdeb27e19606f47a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:44:39 2007 +0200
+
+ ppc4xx: Rework of 4xx serial driver (2)
+
+ Change all linker scripts to reference the changed driver name 4xx_uart.o.
+
+ Note: In most cased all these explicit referencing of these object files
+ in the linker scripts is not neccessary. Only for manually embedded
+ environment into the U-Boot image, which is not done is most cases.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ad31e40bed042cb670d0036fea96435007afb838
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:09:59 2007 +0200
+
+ ppc4xx: Rework of 4xx serial driver (1)
+
+ This patch starts the rework of the PPC4xx serial driver. First we split
+ the file into two seperate files, one 4xx_uart.c with the 405/440 UART
+ handling code and the other one iop480_uart.c with the UART code for the
+ PLX-Tech IOP480 PPC (PPC403 based).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 764e7417ee5f6e25b1715720e7d7dd3487109385
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 10:30:38 2007 +0200
+
+ ppc4xx: Correct UART input clock calculation and passing to fdt
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 07:34:34 2007 +0200
+
+ ppc4xx: Add initial AMCC Makalu 405EX support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fa8aea20456e6f1dba43f46bcc72024dd9499998
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 07:33:52 2007 +0200
+
+ ppc4xx: Add freqUART to CPU speed detection
+
+ This value is needed later for the device tree configuration of
+ the uart clock.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 14:26:29 2007 +0200
+
+ ppc: Small Kilauea cleanup of config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 758c037aeead34b49631b8da3a90b1bba14c0410
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:16:12 2007 +0200
+
+ rtc: Add Xicor/Intersil X1205 RTC support
+
+ This patch adds support for the Xicor/Intersil X1205 RTC used on the
+ AMCC Makalu eval board. This driver is basically cloned from the Linux
+ driver version (2.6.23).
+
+ This patch also introduces the Linux bcd.h header for the BCD2BIN/
+ BIN2BCD conversions. In the future some of the other U-Boot RTC driver
+ should be converted to also use this header instead of implementing
+ their own local copy of these functions/macros.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:12:41 2007 +0200
+
+ ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
+
+ This patch moves some common 4xx macros and the PPC405_SYS_INFO/
+ PPC440_SYS_INFO structure into the common ppc4xx.h header.
+
+ Lot's of other macros are good candidates to be consolidated this way
+ in the future.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 770c7af5800f598d22730d1f4b70f16c9b33512e
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:05:18 2007 +0200
+
+ ppc4xx: Fix size setup in Kilauea DDR2 init routine
+
+ The size was initilized wrong. Instead of 256MB, the DDR2 controller
+ was setup to 512MB. Now the correct values is used.
+
+ This patch also does a little cleanup and adds a comment here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Thu Oct 18 17:29:04 2007 +0200
+
+ ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
+
+ CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
+ number is used to access system registers.
+
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c36c68160333ac5fe41ec3db12a728b7075b3912
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 18 07:42:27 2007 +0200
+
+ ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
+
+ On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
+ is the internal SRAM. Since I now ported and tested this endpoint mode
+ on Kilauea successfully to map to 0 (SDRAM), I also changed this for
+ Katmai.
+
+ Yucca will stay at internal SRAM for now. Not sure if somebody relies on
+ this setup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5cb4af4791f61843432155142b6cfac901f66c10
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 18 07:39:38 2007 +0200
+
+ ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
+
+ This patch adds endpoint support for the AMCC Kilauea eval board. It can
+ be tested by connecting a reworked PCIe cable (only 1x lane singles
+ connected) to another root-complex.
+
+ In this test setup, a 64MB inbound window is configured at BAR0 which maps
+ to 0 on the PLB side. So accessing this BAR0 from the root-complex will
+ access the first 64MB of the SDRAM on the PPC side.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 13 16:43:23 2007 +0200
+
+ ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
+
+ This patch adds support for dynamic configuration of PCIe ports for the
+ AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
+ boards Yucca & Katmai and the 405EX board Kilauea.
+
+ This dynamic configuration is done via the "pcie_mode" environement
+ variable. This variable can be set to "EP" or "RP" for endpoint or
+ rootpoint mode. Multiple values can be joined via the ":" delimiter.
+ Here an example:
+
+ pcie_mode=RP:EP:EP
+
+ This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
+ as endpoint.
+
+ Per default Yucca will be configured as:
+ pcie_mode=RP:EP:EP
+
+ Per default Katmai will be configured as:
+ pcie_mode=RP:RP:REP
+
+ Per default Kilauea will be configured as:
+ pcie_mode=RP:RP
+
+ Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 11 11:15:59 2007 +0200
+
+ ppc4xx: Enable device tree support (fdt) on Kilauea per default
+
+ This patch enables the fdt support on the AMCC Kilauea eval board.
+ Additionally now EBC ranges fdt fixup is included to support NOR
+ FLASH mapping via the Linux physmap_of driver.
+
+ This Kilauea port now support booting arch/ppc and arch/powerpc
+ Linux kernels. The default environment "net_nfs" is for arch/ppc
+ and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
+ support will be removed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 11 11:11:45 2007 +0200
+
+ ppc4xx: Add additional debug info to 4xx fdt support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 21:28:58 2007 +0200
+
+ ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1941cce71b1ae975602854045061e82f94ecd012
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:35:10 2007 +0200
+
+ ppc4xx: Fix small merge problem in 4xx_enet.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:11:30 2007 +0200
+
+ ppc4xx: Add initial AMCC Kilauea 405EX support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dbbd125721aea6645fdb962f36bd41f59e272f9d
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:10:59 2007 +0200
+
+ ppc4xx: Add PPC405EX support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:09:36 2007 +0200
+
+ ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:07:50 2007 +0200
+
+ ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:04:57 2007 +0200
+
+ POST: Add 405EX support to 4xx UART POST test
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 15:10:02 2007 +0200
+
+ DTT: Prepare DS1775 driver for use of different I2C addresses
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 19e93b1e16d267220440d827b920fbad8abfa70f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 14:23:43 2007 +0200
+
+ ppc4xx: 4xx_pcie: Change PCIe status output to match common style
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ff68f66bcb0da847845aa2fac11eba6c25938c99
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 09:22:33 2007 +0200
+
+ ppc4xx: 4xx_pcie: Disable debug output as default
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 09:18:23 2007 +0200
+
+ ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4dbee8a90df613eb517aadbecebd70f168913d30
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 07:57:20 2007 +0200
+
+ ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
+
+ 128MB seems to be the smallest possible value for the memory size
+ for on PCIe port. With this change now the BAR's of the PCIe cards
+ are accessible under U-Boot.
+
+ One big note: This only works for PCIe port 0 & 1. For port 2 this
+ currently doesn't work, since the base address is now 0xc0000000
+ (0xb0000000 + 2 * 0x08000000), and this is already occupied by
+ CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
+ to change the base addresses completely and this change would have
+ too much impact right now.
+
+ This patch adds debug output to the 4xx pcie driver too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 21:16:32 2007 +0200
+
+ ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 15:01:02 2007 +0200
+
+ ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
+
+ These files were introduced with the IBM 405GP but are currently used on all
+ 4xx PPC platforms. So the name doesn't match the content anymore. This patch
+ renames the files to 4xx_pci.c/h.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 14:14:58 2007 +0200
+
+ ppc4xx: Add a comment for 405EX PCIe endpoint configuration
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 10:38:09 2007 +0200
+
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
+
+ (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
+ the SDR registers of the PCIe ports. This makes the overall design
+ clearer, since it removed a lot of switch statements which are not
+ needed anymore.
+
+ Also, the functions ppc4xx_init_pcie_rootport() and
+ ppc4xx_init_pcie_entport() are merged into a single function
+ ppc4xx_init_pcie_port(), since most of the code was duplicated.
+ This makes maintainance and porting to other 4xx platforms
+ easier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 026f71106871f31d17d0ea0db9a7547ff92934bc
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 07:48:09 2007 +0200
+
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
+
+ This patch is the first patch of a series to make the 440SPe PCIe code
+ usable on different 4xx PPC platforms. In preperation for the new 405EX
+ which is also equipped with PCIe interfaces.
+
+ (2) This patch renames the functions from 440spe_ to 4xx_ with a
+ little additional cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c7c6da23028f146d912514b95aefa3da7cf37699
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 07:34:10 2007 +0200
+
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
+
+ This patch is the first patch of a series to make the 440SPe PCIe code
+ usable on different 4xx PPC platforms. In preperation for the new 405EX
+ which is also equipped with PCIe interfaces.
+
+ (1) This patch renames the files from 440spe_pcie to 4xx_pcie
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
+
+ TQM5200: Call usb_cpu_init() during board init
+
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit b5af773f8d92677e06f3295b45557c9d0a487c24
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
+
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+ The scan code of the key 'z' is 0x1d, which should be handled.
+
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Oct 15 11:59:17 2007 +0200
+
+ PXA USB OHCI: "usb stop" implementation.
+
+ Some USB keys need to be switched off before loading the kernel
+ otherwise they can remain in an undefined status which prevents them
+ to be correctly recognized by the kernel.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 31548249decf18a6b877a18436b6139dd483fe4a
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
+
+ DHCP Client Fix
+
+ This is a multi-part message in MIME format.
+
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
+
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
+
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:16:22 2007 -0500
+
+ ColdFire 54455: Fix correct boot location for atmel and intel
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:14:00 2007 -0500
+
+ ColdFire: Fix build error when CONFIG_WATCHDOG is defined
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c67e12e705b204cfe914e3e3e693d69a445dcabf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:12:36 2007 -0500
+
+ ColdFire 5329: Assign correct SDRAM size and fix cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:10:23 2007 -0500
+
+ ColdFire 5253: Assign correct SDRAM size
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2acefa72ee0026f862ab65597ca687428f63a973
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:09:17 2007 -0500
+
+ ColdFire 5282: Fix external flash boot and return dramsize
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 25 17:20:01 2007 +0200
+
+ TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:42:25 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit be4a87f11e297a5cededbf7dd71c0248f3874acd
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:41:27 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b31f64343ead9482cd439b1adbe4c34026a641b1
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:45:53 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:40:06 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Oct 21 09:14:28 2007 +0200
+
+ Mips: Fix string functions differ prototype declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Oct 19 17:51:40 2007 -0500
+
+ fsl_pci_init enable COMMAND_MEMORY if inbound window
+
+ Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
+ to pciauto_setup_device has the side effect of not getting
+ COMMAND_MEMORY set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e9d0d527992566ebef9826962ff1745b2f082b92
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 10:55:24 2007 +0200
+
+ delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 08:10:15 2007 +0200
+
+ fix warning: no return statement in function returning non-void
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e78220f6e514206757acfe247297fc9a328a881f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 06:33:45 2007 +0200
+
+ xsengine: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:24:59 2007 +0200
+
+ lubbock: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 23 16:50:03 2007 +0200
+
+ Coding style: keep lists sorted; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 58b74b05c621e2835ecf4e2d3243042cf4186777
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri Oct 19 00:09:05 2007 +0200
are added to u-boot.
Signed-off-by Rune Torgersen <runet@innovsys.com>
+commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 13:14:10 2007 +0200
+
+ Motion-PRO: Update configuration to accomodate next generation board.
+
+ New board has faster oscillator and a different Flash chip. This affects:
+ - CFG_MPC5XXX_CLKIN
+ - SDRAM timings
+ - Flash CS configuration (timings)
+ - Flash sector size, and thus MTD partition layout
+ - malloc() arena size (due to bigger Flash sectors)
+ - smaller memory test range (due to bigger malloc() arena)
+
+ This patch also enables more extensive memory testing via "mtest".
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eff501904df2bf1724a750062628ba2c51dbb1f8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 11:36:07 2007 +0200
+
+ Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
+
+ Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
+ register must be written a value of 0x00000004 as the first step of the
+ SDRAM contorller configuration.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Oct 23 10:22:16 2007 +0100
+
+ Move PL01* serial drivers to drivers/serial and adjust Makefiles.
+
+commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 10:17:42 2007 +0200
+
+ ppc4xx: lwmon5: Some further GPIO config changes
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Sun Oct 21 22:10:10 2007 +0900
+
+ [MIPS] Fix UNCACHED_SDRAM
+
+ PHYSADDR is for physical address, KSEG1ADDR is for uncached.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 00101dd7a32d12f698150123e47e4b3420279f86
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 21:30:42 2007 +0900
+
+ [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit eb700636db017d310edaeb559b13d82588560674
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:37 2007 +0900
+
+ [MIPS] u-boot.lds: Define _gp in a standard manner
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] Fix $gp usage
+
+ Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
+ As a general principle, we should use _gp for $gp.
+
+ Thanks to linker script's help we fortunately have _gp which equals to
+ _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
+ be able to access to GOT entires, global variables and procedure entry
+ points. The right thing to do is to use _gp.
+
+ This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
+ which holds the offset from _gp. When updating GOT entries, we use this
+ offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
+
+ This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
+ I made some change to leave over num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Vlad Lungu <vlad@comsys.ro>
+
+commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Fix __got_start and __got_end
+
+ Ensure that __got_start points to top of the `.got', and __got_end points
+ to bottom as well, so that we never fail to count num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Remove duplicated .sdata section
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Oct 21 01:01:17 2007 +0200
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+commit df90968b48fb34fa9072fab150db2ac89678f537
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:32:13 2007 -0400
+
+ Setting MSR[DE] in do_reset
+
+ Hello,
+ This patch ensures the soft reset of the board for the 85xx boards
+ by setting the MSR[DE] in the do_reset function.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:36:01 2007 -0400
+
+ MSR overwrite fix
+
+ Hello,
+ This patch fixes the MSR overwrite in the start.S when moving out of
+ the last 4K page.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
+Author: Dan Wilson <dwilson@fulcrummicro.com>
+Date: Fri Oct 19 11:33:48 2007 -0500
+
+ tsec driver should clear RHALT on startup
+
+ This was causing problems for some people.
+
+ Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
+ Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:29:18 2007 -0500
+
+ Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
+
+ On the MPC85xx CDS we have two issues:
+
+ 1. The device tree fixup code did not check to see if the property we are
+ trying to update is actually found. Its possible that it would update
+ random memory starting at 0.
+
+ 2. Newer Linux kernel's have moved the location of the PCI nodes to be
+ sibilings of the soc node and not children. The explicit PATH to the PCI
+ node would not be found for these device trees. Add the ability to handle
+ both paths. In the future we shouldn't handle such fixups by explicit path.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3063eec775719b7e91023bbec3f64b3118791df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:18:48 2007 -0500
+
+ Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
+
+ On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
+ console. Make it so we match that config what we tell Linux as the early
+ STDOUT console.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e1ce3cb617bb06f91f82f98915391175addf3e82
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 2 11:12:27 2007 -0500
+
+ Remove magic numbers from cache related operations for mpc85xx
+
+ The mpc85xx start code uses some magic numbers that we actually
+ have #defines for in <config.h> so use those instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
Author: Detlev Zundel <dzu@denx.de>
Date: Fri Oct 19 16:47:26 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 15:27:43 2007 -0500
+
+ Initial mpc8610hpcd Makefile files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 15:26:51 2007 -0500
+
+ Initial mpc8610hpcd cpu/, README and include/ files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 13:54:01 2007 -0500
+
+ Initial mpc8610hpcd board files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
Author: runet@innovsys.com <runet@innovsys.com>
Date: Tue Oct 16 14:50:40 2007 -0500
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Sep 26 16:35:54 2007 -0500
+
+ 85xx io out functions need sync after write.
+
+ This fixes the mc146818 rtc_read/write functions for 85xx.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
Author: Grant Likely <grant.likely@secretlab.ca>
Date: Tue Sep 25 15:48:05 2007 -0600
synchronizition with mainline
+commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:42:38 2007 +0900
+
+ sh: Add support command of ide with sh
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:38:42 2007 +0900
+
+ sh: Update Makefile
+
+ Add support MS7722SE01 to Makefile.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:31:13 2007 +0900
+
+ sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:19:24 2007 +0900
+
+ sh: Update MS7750SE01 platform
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 516ad760db3553766267ada01b7d5d727faa4bbd
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:17:08 2007 +0900
+
+ sh: Remove comment out code from include/asm-sh/cpu_sh4.h
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b02bad128669e567fce87d8df823b06a0144b8db
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Sep 23 02:12:30 2007 +0900
+
+ sh: Update core code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Sep 20 00:04:14 2007 +0200
Fix to compile JSE against 20070514 git of u-boot
+commit 69df3c4da0c93017cceb25a366e794570bd0ed98
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 21:01:03 2007 +0900
+
+ sh: MS7750SE support.
+
+ This adds support for the Hitachi MS7750SE.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
+Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
+Date: Sun May 13 20:58:00 2007 +0900
+
+ sh: First support code of SuperH.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
Author: Stefan Roese <sr@denx.de>
Date: Fri May 11 12:01:49 2007 +0200