/dev/fd : -> 0x0200 (floppy disk)
/dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
/dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
- /dev/ada: -> 0x1c00 (first ACSI device)
- /dev/adb: -> 0x1c10 (second ACSI device)
- /dev/adc: -> 0x1c20 (third ACSI device)
- /dev/add: -> 0x1c30 (forth ACSI device)
-
-The last four names are available only if the kernel has been compiled
-with Atari and ACSI support.
The name must be followed by a decimal number, that stands for the
partition number. Internally, the value of the number is just
seconds.
-2.6) ramdisk=
+2.6) ramdisk_size=
-------------
-Syntax: ramdisk=<size>
+Syntax: ramdisk_size=<size>
This option instructs the kernel to set up a ramdisk of the given
size in KBytes. Do not use this option if the ramdisk contents are
The first 3 parameters of this sub-option should be obvious: <xres>,
<yres> and <depth> give the dimensions of the screen and the number of
-planes (depth). The depth is is the logarithm to base 2 of the number
+planes (depth). The depth is the logarithm to base 2 of the number
of colors possible. (Or, the other way round: The number of colors is
2^depth).
24 bit region which is specified by a mask of 0x00fffffe.
-5.5) 53c7xx=
-------------
-
-Syntax: 53c7xx=<sub-options...>
-
-These options affect the A4000T, A4091, WarpEngine, Blizzard 603e+,
-and GForce 040/060 SCSI controllers on the Amiga, as well as the
-builtin MVME 16x SCSI controller.
-
-The <sub-options> is a comma-separated list of the sub-options listed
-below.
-
-5.5.1) nosync
--------------
-
-Syntax: nosync:0
-
- Disables sync negotiation for all devices. Any value after the
- colon is acceptable (and has the same effect).
-
-5.5.2) noasync
---------------
-
-Syntax: noasync:0
-
- Disables async and sync negotiation for all devices. Any value
- after the colon is acceptable (and has the same effect).
-
-5.5.3) nodisconnect
--------------------
-
-Syntax: nodisconnect:0
-
- Disables SCSI disconnects. Any value after the colon is acceptable
- (and has the same effect).
-
-5.5.4) validids
----------------
-
-Syntax: validids:0xNN
-
- Specify which SCSI ids the driver should pay attention to. This is
- a bitmask (i.e. to only pay attention to ID#4, you'd use 0x10).
- Default is 0x7f (devices 0-6).
-
-5.5.5) opthi
-5.5.6) optlo
-------------
-
-Syntax: opthi:M,optlo:N
-
- Specify options for "hostdata->options". The acceptable definitions
- are listed in drivers/scsi/53c7xx.h; the 32 high bits should be in
- opthi and the 32 low bits in optlo. They must be specified in the
- order opthi=M,optlo=N.
-
-5.5.7) next
------------
-
- No argument. Used to separate blocks of keywords when there's more
- than one 53c7xx host adapter in the system.
-
-
/* Local Variables: */
/* mode: text */
/* End: */